A modified mixed strengthening model was proposed for describing the yield strength of particle reinforced aluminum matrix composites.The strengthening mechanisms of the composites were analyzed based on the microstru...A modified mixed strengthening model was proposed for describing the yield strength of particle reinforced aluminum matrix composites.The strengthening mechanisms of the composites were analyzed based on the microstructures and compression mechanical properties.The distribution uniformity of reinforcements and cooperation relationship among dislocation mechanisms were considered in the modified mixed strengthening model by introducing a distribution uniformity factor u and a cooperation coefficient fc,respectively.The results show that the modified mixed strengthening model can accurately describe the yield strengths of Al3Ti/2024Al composites with a relative deviation less than1.2%,which is much more accurate than other strengthening models.The modified mixed model can also be used to predict the yield strength of Al3Ti/2024Al composites with different fractions of reinforcements.展开更多
Based on one type of practical Biot＇s equation and the dynamic-stiffness matrices ofa poroelastic soil layer and half-space, Green＇s functions were derived for unitformly distributed loads acting on an inclined line...Based on one type of practical Biot＇s equation and the dynamic-stiffness matrices ofa poroelastic soil layer and half-space, Green＇s functions were derived for unitformly distributed loads acting on an inclined line in a poroelastie layered site. This analysis overcomes significant problems in wave scattering due to local soil conditions and dynamic soil-structure interaction. The Green＇s functions can be reduced to the case of an elastic layered site developed by Wolf in 1985. Parametric studies are then carried out through two example problems.展开更多
The tilt-blade mechanical stirring of A356-2.5vol.%SiCp liquid was conducted in a cylindrical crucible to solve the problem of nonhomogeneous radial distribution of SiC particles in conventional straight-blade mechani...The tilt-blade mechanical stirring of A356-2.5vol.%SiCp liquid was conducted in a cylindrical crucible to solve the problem of nonhomogeneous radial distribution of SiC particles in conventional straight-blade mechanical stirring. The radial distribution of SiC particles in A356 liquid was studied under the conditions of 25° for horizontal tilt angle α of the blade, 200 r/min for rotating speed of stirrer and 10 mm/s for speed of moving up and down of stirrer. The results show that there exists a nonlinear relationship between circumferential tilt angle β of the blade and radial relative deviation d of SiCp content in A356 liquid. When β is smaller than 20°, the d of SiCp content in A356 liquid between the center and the periphery of crucible decreases with increasing β. Conversely, when β is bigger than 26°, d increases with increasing β. Only when β is about 20°, d can be equal to nought i.e. uniform radial distribution of SiC particles can be realized. It can be seen that the nonhomogeneous radial distribution of SiC particles in conventional straight-blade mechanical stirring can be eliminated in this tilt-blade mechanical stirring of A356-SiCp liquid.展开更多
In the manufacture of SiC_p/Al completes via powder metallurgy, the method of assessing the distri-bution uniformity of SiC particles is very important. The SiC_p distribution uniformity on each processingprocedure a...In the manufacture of SiC_p/Al completes via powder metallurgy, the method of assessing the distri-bution uniformity of SiC particles is very important. The SiC_p distribution uniformity on each processingprocedure at the macro- and micro-mixed stages was investigated and the methods for determining mix-ture quality were put forward.展开更多
Wireless sensor networks have several special characteristics which make against the network coverage, such as shortage of energy, difficulty with energy supply and so on. In order to prolong the lifetime of wireless ...Wireless sensor networks have several special characteristics which make against the network coverage, such as shortage of energy, difficulty with energy supply and so on. In order to prolong the lifetime of wireless sensor networks, it is necessary to balance the whole network load. As the energy consumption is related to the situation of nodes, the distribution uniformity must be considered. In this paper, a new model is proposed to evaluate the nodes distribution uniformity by considering some parameters which include compression discrepancy, sparseness discrepancy, self discrepancy, maximum cavity radius and minimum cavity radius. The simulation results show that the presented model could be helpful for measuring the distribution uniformity of nodes scattered randomly in wireless sensor networks.展开更多
In this study,the approximate and exact solutions for the stationary-state of the solids model with neglecting reactant consumption for both non-uniform and uniform temperature systems were applied on gas ignition und...In this study,the approximate and exact solutions for the stationary-state of the solids model with neglecting reactant consumption for both non-uniform and uniform temperature systems were applied on gas ignition under a constant pressure condition.The criticality conditions for a slab,an infinite cylinder,and a sphere are determined and discussed using dimensionless temperatures under constant ambient and surface temperatures for a non-uniform temperature system.Exact solution for a Semenov model with convection heat loss was also presented.The solution of the Semenov problem for constant volume or density as a solid and constant pressure were compared.The critical parameterδis calculated and compared with those of Frank-Kamenetskii solution values.The validation of the calculated ignition temperatures with other exact solution and experimental results were offered.The relation between critical parameters form Semenov and F.K.models solution was introduced.展开更多
After expanding the capacity by widening the trolley of the No. 3 sintering machine, severe uneven sintering occurred in the trolley＇ s lateral distribution, which affected the output and quality of sinter. In this s...After expanding the capacity by widening the trolley of the No. 3 sintering machine, severe uneven sintering occurred in the trolley＇ s lateral distribution, which affected the output and quality of sinter. In this study, the quantitative evaluation indices of the burden uniform distribution in the width direction of the sintering machine is introduced for the first time. By measuring the temperature of discharged gas, a plane temperature field is constructed. Through analyzing the temperature field and the burden layer＇ s differential thermal equilibrium, a mathematical model for evaluating the indices, which is an online reflection of the degree of uniform distribution, is built. Following the improvements in burden distribution equipment ,the optimization of the ignition system and the dynamic adjustment of the process ,the problem of uneven sintering in lateral distribution has been solved, and the quality and the yield of sinter have been improved.展开更多
The plenum chamber of a heat setting machine is a key structure for distributing hot air to different air channels.Its outlet velocity uniformity directly determines the heating uniformity of textiles,significantly af...The plenum chamber of a heat setting machine is a key structure for distributing hot air to different air channels.Its outlet velocity uniformity directly determines the heating uniformity of textiles,significantly affecting the heat setting performance.In a traditional heat setting machine,the outlet airflow maldistribution of the plenum chamber still exists.In this study,a novel plenum chamber with an airfoil baffle was established to improve the uniformity of the velocity distribution at the outlet in a heat setting machine.The structural influence of the plenum chamber on the velocity distribution was investigated using a computational fluid dynamics program.It was found that a chamber with a smaller outlet partition thickness had a better outlet velocity uniformity.The structural optimization of the plenum chamber was conducted using the particle swarm optimization algorithm.The outlet partition thickness,the transverse distance and the longitudinal distance of the optimized plenum chamber were 20,686.2 and 274.6 mm,respectively.Experiments were carried out.The experimental and simulated results showed that the optimized plenum chamber with an airfoil baffle could improve the outlet velocity uniformity.The air outlet velocity uniformity index of the optimized plenum chamber with an airfoil baffle was 4.75%higher than that of the plenum chamber without an airfoil baffle and 5.98%higher than that of the conventional chamber with a square baffle in a commercial heat setting machine.展开更多
This paper presents a power system architecture where SIPO （series-input parallel-output） converters are controlled to achieve uniform inpt voltages across their respective series-connected power sources while also ...This paper presents a power system architecture where SIPO （series-input parallel-output） converters are controlled to achieve uniform inpt voltages across their respective series-connected power sources while also tracking the system optimum power point; the system optimum power point is the maximum power drawn from the series-connected power sources while their voltages are kept uniformly distributed. With proper uniform input voltage distribution control, near maximum use of the power sources is achieved by employing only one MPT （maximum power tracking） controller instead of multiple MPT controllers dedicated for their respective power sources. Provided that the maximum power point voltages of the input power sources are similar, the resulting system architecture offers near-maximum power transfer with a lower parts count. A feasibility study using computer simulation has successfully validated two SIPO power architectures and their control concepts for optimum power transfer.展开更多
The impregnation method for preparing catalysts often faces challenges such as prolonged preparation times and poor dispersion of active components due to the limited mobility of the impregnation liquid.The rotating p...The impregnation method for preparing catalysts often faces challenges such as prolonged preparation times and poor dispersion of active components due to the limited mobility of the impregnation liquid.The rotating packed bed(RPB)can break the precursor solution into fine droplets,enabling dynamic impregnation of active components onto the surface of activated carbon.This approach facilitates the uniform distribution of active components on the carrier and enhances the stability and performance of the catalyst.In this study,activated carbon catalysts were prepared using high-gravity technology.It was found that the preparation time for Co-MnO_(x)/GAC using the RPB method was reduced by 98%,the catalytic activity increased by 6.62%,and the loadings of active components increased by 13%and 17%,the catalytic activity remained stable after five cycles,with a significantly lower rate of metal dissolution.A suite of complementary analytical techniques demonstrates that Co-MnO_(x)/GAC(RPB)has higher homogeneity and dispersion.X-ray photoelectron spectroscopy(XPS)results indicate that Co(II)and Mn(IV)/Mn(III)are the primary active sites during the catalytic decomposition of ozone,elucidating the mechanism of synergistic catalytic ozonation by dual-active components.Finally,electron paramagnetic resonance(EPR)confirmed that hydroxyl radicals($OH)were the predominant reactive species in the reaction.展开更多
β-ray-induced X-ray spectroscopy(BIXS)is a promising technique for tritium analysis that offers several unique advantages,including substantial detection depth,nondestructive testing capabilities,and ease of operatio...β-ray-induced X-ray spectroscopy(BIXS)is a promising technique for tritium analysis that offers several unique advantages,including substantial detection depth,nondestructive testing capabilities,and ease of operation.For thin solid tritium-containing samples with substrates,the currently used BIXS analysis method can measure the tritium depth profile and content when the sample thickness is known.In this study,a backpropagation(BP)neural network algorithm was used to predict the tritium content and thickness of a thin solid tritium-containing sample with substrates and a uniformly distributed tritium profile.A semi-analytical method was used to generate datasets for training and testing the BP neural network.A dataset ofβ-decay X-ray spectra from 420 tritium-containing zirconium models with different known thicknesses and tritium-tozirconium ratios was used as the input data.The corresponding zirconium thicknesses and tritium-to-zirconium ratios served as the output for training and testing the BP neural network.The mean relative errors(MREs)of the zirconium thickness in the training and test datasets were 0.56%and 0.42%,respectively,whereas the MREs of the tritium-to-zirconium ratio were 0.59%and 0.38%,respectively.Furthermore,the trained BP neural network demonstrates excellent predictive capability across various levels of statistical uncertainty.For the experimentalβ-decay X-ray spectra of two tritium-containing samples,the predicted zirconium thicknesses and tritium-to-zirconium ratios showed good agreement with the results obtained through the elastic backscattering spectrometry(EBS).展开更多
Based on the non-Darcian flow law described by exponent m and threshold gradient i 1 under a low hydraulic gradient and the classical nonlinear relationships e-lgσ′ and e-lgk v (Mesri and Rokhsar, 1974), the governi...Based on the non-Darcian flow law described by exponent m and threshold gradient i 1 under a low hydraulic gradient and the classical nonlinear relationships e-lgσ′ and e-lgk v (Mesri and Rokhsar, 1974), the governing equation of 1D nonlinear consolidation was modified by considering both uniform distribution of self-weight stress and linear increment of self-weight stress. The numerical solutions for the governing equation were derived by the finite difference method (FDM). Moreover, the solutions were verified by comparing the numerical results with those by analytical method under a specific case. Finally, consolidation behavior under different parameters was investigated, and the results show that the rate of 1D nonlinear consolidation will slow down when the non-Darcian flow law is considered. The consolidation rate with linear increment of self-weight stress is faster than that with uniform distribution one. Compared to Darcy's flow law, the influence of parameters describing non-linearity of soft soil on consolidation behavior with non-Darcian flow has no significant change.展开更多
Nonuniform flow distribution along the radial direction usually exists in a Z-flow type radial flow adsorber,which will decrease the utilization of adsorbent and the switching time and may result in operating safety p...Nonuniform flow distribution along the radial direction usually exists in a Z-flow type radial flow adsorber,which will decrease the utilization of adsorbent and the switching time and may result in operating safety problems in cryogenic air separation.In order to improve the uniformity of the flow distribution along the radial direction in the adsorber,a differential equation is derived through pressure drop analysis in the Z-flow type radial adsorber with a cone in the middle of the central pipe.The differential equation determines the ideal cross-sectional radii of the cone along the axis.The result shows that the cross-sectional radius of the cone should gradually decrease from 0.3 m to zero along the axis to ensure that the process air is distributed uniformly in the Z-flow type radial flow adsorber and the shape of the cone is a little convex.The flow distribution without the cone in the central pipe is compared under different bed porosities.It is demonstrated that the proposed differential equation can provide theoretical support for designing Z-flow type radial flow adsorbers.展开更多
W-2 wt.%Y2O3 composite material with uniform distribution of yttrium element was fabricated through processes of mechanical alloying （MA） and spark plasma sintering （SPS）. The relevant productions were characteriz...W-2 wt.%Y2O3 composite material with uniform distribution of yttrium element was fabricated through processes of mechanical alloying （MA） and spark plasma sintering （SPS）. The relevant productions were characterized by scanning electron microscopy （SEM）, energy dispersive spectroscopy （EDS）, X-ray diffraction （XRD）, and transmission electron microscopy （TEM）. The XRD showed that the W-2 wt.%Y2O3 composite powder, including tungsten matrix and Y2O3 particles, was refined to nanometer sizes during the MA process. The SEM and TEM micrographs showed that the MA produced composite powder presented a lamellar morphology and contained many dislocations and microcracks. The EDS showed that the Y and O elements were uniformly distributed in the W matrix after mechanically alloying for 15 h. The W-2 wt.%Y2O3 composite material with uniform distribution of yttrium was obtained by sintering of the MA produced composite powder.展开更多
Supported NiCu bimetallic catalysts have been produced in-situ on commercial Al_(2)O_(3)by using layered double hydroxides as precursors.The resulting catalysts show a uniform Ni and Cu distribution,thus providing goo...Supported NiCu bimetallic catalysts have been produced in-situ on commercial Al_(2)O_(3)by using layered double hydroxides as precursors.The resulting catalysts show a uniform Ni and Cu distribution,thus providing good activity and selectivity in the reforming reaction of n-heptane.The catalytic performance has been found to depend on the Cu/Ni ratio,revealing the synergic catalysis between homogeneously dispersed Ni and Cu sites.The good catalysis of Ni Cu bimetallic catalysts makes it possible to partly or even completely replace Pt with NiCu bimetallic catalysts.展开更多
The generation of good pseudo-random numbers is the base of many important fields in scientific computing, such as randomized algorithms and numerical solution of stochastic differential equations. In this paper, a cl...The generation of good pseudo-random numbers is the base of many important fields in scientific computing, such as randomized algorithms and numerical solution of stochastic differential equations. In this paper, a class of random number generators （RNGs） based on Weyl sequence is proposed. The uniformity of those RNGs is proved theoretically. Statistical and numerical computations show the efficiency of the methods.展开更多
A level-value estimation method was illustrated for solving the constrained global optimization problem. The equivalence between the root of a modified variance equation and the optimal value of the original optimizat...A level-value estimation method was illustrated for solving the constrained global optimization problem. The equivalence between the root of a modified variance equation and the optimal value of the original optimization problem is shown. An alternate algorithm based on the Newton＇s method is presented and the convergence of its implementable approach is proved. Preliminary numerical results indicate that the method is effective.展开更多
High-speed, high-accuracy data converters are attractive for use in most RF applications. Such converters allow direct conversion to occur between the digital baseband and the antenna. However, high speed and high acc...High-speed, high-accuracy data converters are attractive for use in most RF applications. Such converters allow direct conversion to occur between the digital baseband and the antenna. However, high speed and high accuracy make the analog components in a converter more complex, and this complexity causes more power to be dissipated than if a traditional approach were taken. A static calibration technique for flash analog-to-digital converters （ADCs） is discussed in this paper. The calibration is based onhistogram test methods, and equivalent errors in the flash ADC comparators are estimated in the digital domain without any significant changes being made to the ADC comparators. In the trimming process, reference voltages are adjusted to compensate for static errors. Behavioral-level simulations of a moderate-resolution 8-bit flash ADC show that, for typical errors, ADC performance is considerably improved by the proposed technique. As a result of calibration, the differential no.nlinearities （DNLs） are reduced on average from 4 LSB to 0.5 LSB, and the integral nonlinearities （INLs） are reduced on average from 4.2 LSB to 0.35 LSB. Implementation issues for this proposed technique are discussed in our subsequent paper, “A Histogram-Based Static-Error Correction Technique for Flash ADCs： Implementation Aspects. ”展开更多
The random step maneuver with uniformly distributed starting times has the disadvantage that it cannot focus the starting time on the more efficiency time. It decreases the penetration probability. To resolve this pro...The random step maneuver with uniformly distributed starting times has the disadvantage that it cannot focus the starting time on the more efficiency time. It decreases the penetration probability. To resolve this problem, a random step penetration algorithm with normal distribution starting time is proposed. Using the shaping filters and adjoint system method, the miss distance with different starting times can be acquired. According to the penetration standard, the time window ensuring successful penetration can be calculated and it is used as the 3σ bound of the normally distributed random maneuver. Simulation results indicate that the normally distributed random maneuver has higher penetration probability than the uniformly distributed random maneuver.展开更多
基金Projects (51875121,51405100) supported by the National Natural Science Foundation of ChinaProjects (2014M551233,2017T100237) supported by the China Postdoctoral Science Foundation+2 种基金Project (ZR2017PA003) supported by the Natural Science Foundation of Shandong Province,ChinaProject (2017GGX202006) supported by the Plan of Key Research and Development of Shandong Province,ChinaProject (2016DXGJMS05) supported by the Plan of Science and Technology Development of Weihai,China
文摘A modified mixed strengthening model was proposed for describing the yield strength of particle reinforced aluminum matrix composites.The strengthening mechanisms of the composites were analyzed based on the microstructures and compression mechanical properties.The distribution uniformity of reinforcements and cooperation relationship among dislocation mechanisms were considered in the modified mixed strengthening model by introducing a distribution uniformity factor u and a cooperation coefficient fc,respectively.The results show that the modified mixed strengthening model can accurately describe the yield strengths of Al3Ti/2024Al composites with a relative deviation less than1.2%,which is much more accurate than other strengthening models.The modified mixed model can also be used to predict the yield strength of Al3Ti/2024Al composites with different fractions of reinforcements.
基金National Natural Science Foundation of China Under Grant No.50378063
文摘Based on one type of practical Biot＇s equation and the dynamic-stiffness matrices ofa poroelastic soil layer and half-space, Green＇s functions were derived for unitformly distributed loads acting on an inclined line in a poroelastie layered site. This analysis overcomes significant problems in wave scattering due to local soil conditions and dynamic soil-structure interaction. The Green＇s functions can be reduced to the case of an elastic layered site developed by Wolf in 1985. Parametric studies are then carried out through two example problems.
基金supported by the National Natural Science Foundation of China (No. 50974010)the Natural Science Foundation of Beijing (No. 2102039)
文摘The tilt-blade mechanical stirring of A356-2.5vol.%SiCp liquid was conducted in a cylindrical crucible to solve the problem of nonhomogeneous radial distribution of SiC particles in conventional straight-blade mechanical stirring. The radial distribution of SiC particles in A356 liquid was studied under the conditions of 25° for horizontal tilt angle α of the blade, 200 r/min for rotating speed of stirrer and 10 mm/s for speed of moving up and down of stirrer. The results show that there exists a nonlinear relationship between circumferential tilt angle β of the blade and radial relative deviation d of SiCp content in A356 liquid. When β is smaller than 20°, the d of SiCp content in A356 liquid between the center and the periphery of crucible decreases with increasing β. Conversely, when β is bigger than 26°, d increases with increasing β. Only when β is about 20°, d can be equal to nought i.e. uniform radial distribution of SiC particles can be realized. It can be seen that the nonhomogeneous radial distribution of SiC particles in conventional straight-blade mechanical stirring can be eliminated in this tilt-blade mechanical stirring of A356-SiCp liquid.
文摘In the manufacture of SiC_p/Al completes via powder metallurgy, the method of assessing the distri-bution uniformity of SiC particles is very important. The SiC_p distribution uniformity on each processingprocedure at the macro- and micro-mixed stages was investigated and the methods for determining mix-ture quality were put forward.
基金Supported by the National Natural Science Foundation of China （No. 60572035）
文摘Wireless sensor networks have several special characteristics which make against the network coverage, such as shortage of energy, difficulty with energy supply and so on. In order to prolong the lifetime of wireless sensor networks, it is necessary to balance the whole network load. As the energy consumption is related to the situation of nodes, the distribution uniformity must be considered. In this paper, a new model is proposed to evaluate the nodes distribution uniformity by considering some parameters which include compression discrepancy, sparseness discrepancy, self discrepancy, maximum cavity radius and minimum cavity radius. The simulation results show that the presented model could be helpful for measuring the distribution uniformity of nodes scattered randomly in wireless sensor networks.
文摘In this study,the approximate and exact solutions for the stationary-state of the solids model with neglecting reactant consumption for both non-uniform and uniform temperature systems were applied on gas ignition under a constant pressure condition.The criticality conditions for a slab,an infinite cylinder,and a sphere are determined and discussed using dimensionless temperatures under constant ambient and surface temperatures for a non-uniform temperature system.Exact solution for a Semenov model with convection heat loss was also presented.The solution of the Semenov problem for constant volume or density as a solid and constant pressure were compared.The critical parameterδis calculated and compared with those of Frank-Kamenetskii solution values.The validation of the calculated ignition temperatures with other exact solution and experimental results were offered.The relation between critical parameters form Semenov and F.K.models solution was introduced.
文摘After expanding the capacity by widening the trolley of the No. 3 sintering machine, severe uneven sintering occurred in the trolley＇ s lateral distribution, which affected the output and quality of sinter. In this study, the quantitative evaluation indices of the burden uniform distribution in the width direction of the sintering machine is introduced for the first time. By measuring the temperature of discharged gas, a plane temperature field is constructed. Through analyzing the temperature field and the burden layer＇ s differential thermal equilibrium, a mathematical model for evaluating the indices, which is an online reflection of the degree of uniform distribution, is built. Following the improvements in burden distribution equipment ,the optimization of the ignition system and the dynamic adjustment of the process ,the problem of uneven sintering in lateral distribution has been solved, and the quality and the yield of sinter have been improved.
基金National Natural Science Foundation of China(No.62173307)the Key R&D Projects of Science and Technology Department of Zhejiang Province,China(Nos.2023C01158,2022C01065 and 2022C01188)the Fundamental Research Funds of Zhejiang Sci-Tech University,China(No.22242298-Y)。
文摘The plenum chamber of a heat setting machine is a key structure for distributing hot air to different air channels.Its outlet velocity uniformity directly determines the heating uniformity of textiles,significantly affecting the heat setting performance.In a traditional heat setting machine,the outlet airflow maldistribution of the plenum chamber still exists.In this study,a novel plenum chamber with an airfoil baffle was established to improve the uniformity of the velocity distribution at the outlet in a heat setting machine.The structural influence of the plenum chamber on the velocity distribution was investigated using a computational fluid dynamics program.It was found that a chamber with a smaller outlet partition thickness had a better outlet velocity uniformity.The structural optimization of the plenum chamber was conducted using the particle swarm optimization algorithm.The outlet partition thickness,the transverse distance and the longitudinal distance of the optimized plenum chamber were 20,686.2 and 274.6 mm,respectively.Experiments were carried out.The experimental and simulated results showed that the optimized plenum chamber with an airfoil baffle could improve the outlet velocity uniformity.The air outlet velocity uniformity index of the optimized plenum chamber with an airfoil baffle was 4.75%higher than that of the plenum chamber without an airfoil baffle and 5.98%higher than that of the conventional chamber with a square baffle in a commercial heat setting machine.
文摘This paper presents a power system architecture where SIPO （series-input parallel-output） converters are controlled to achieve uniform inpt voltages across their respective series-connected power sources while also tracking the system optimum power point; the system optimum power point is the maximum power drawn from the series-connected power sources while their voltages are kept uniformly distributed. With proper uniform input voltage distribution control, near maximum use of the power sources is achieved by employing only one MPT （maximum power tracking） controller instead of multiple MPT controllers dedicated for their respective power sources. Provided that the maximum power point voltages of the input power sources are similar, the resulting system architecture offers near-maximum power transfer with a lower parts count. A feasibility study using computer simulation has successfully validated two SIPO power architectures and their control concepts for optimum power transfer.
基金supported by the National Natural Science Foundation of China(U23A20676)Key Research&Development Plan of Shanxi Province(202202040201011)+3 种基金Shanxi Scholarship Council of China(2023-128)Small and medium-sized oriented scientific and technological enterprises innovation ability improvement project of Shandong Province(2023TSGC0004)the Graduate Student Innovation Project of Shanxi Province(2023SJ205)Local Funds for Science and Technology Development Guided by the Central Finance(YDZJSX20231A030).
文摘The impregnation method for preparing catalysts often faces challenges such as prolonged preparation times and poor dispersion of active components due to the limited mobility of the impregnation liquid.The rotating packed bed(RPB)can break the precursor solution into fine droplets,enabling dynamic impregnation of active components onto the surface of activated carbon.This approach facilitates the uniform distribution of active components on the carrier and enhances the stability and performance of the catalyst.In this study,activated carbon catalysts were prepared using high-gravity technology.It was found that the preparation time for Co-MnO_(x)/GAC using the RPB method was reduced by 98%,the catalytic activity increased by 6.62%,and the loadings of active components increased by 13%and 17%,the catalytic activity remained stable after five cycles,with a significantly lower rate of metal dissolution.A suite of complementary analytical techniques demonstrates that Co-MnO_(x)/GAC(RPB)has higher homogeneity and dispersion.X-ray photoelectron spectroscopy(XPS)results indicate that Co(II)and Mn(IV)/Mn(III)are the primary active sites during the catalytic decomposition of ozone,elucidating the mechanism of synergistic catalytic ozonation by dual-active components.Finally,electron paramagnetic resonance(EPR)confirmed that hydroxyl radicals($OH)were the predominant reactive species in the reaction.
基金supported by the National Natural Science Foundation of China(No.12175158)the Institute of Nuclear Physics and Chemistry,China Academy of Engineering Physics(No.HG2022022)。
文摘β-ray-induced X-ray spectroscopy(BIXS)is a promising technique for tritium analysis that offers several unique advantages,including substantial detection depth,nondestructive testing capabilities,and ease of operation.For thin solid tritium-containing samples with substrates,the currently used BIXS analysis method can measure the tritium depth profile and content when the sample thickness is known.In this study,a backpropagation(BP)neural network algorithm was used to predict the tritium content and thickness of a thin solid tritium-containing sample with substrates and a uniformly distributed tritium profile.A semi-analytical method was used to generate datasets for training and testing the BP neural network.A dataset ofβ-decay X-ray spectra from 420 tritium-containing zirconium models with different known thicknesses and tritium-tozirconium ratios was used as the input data.The corresponding zirconium thicknesses and tritium-to-zirconium ratios served as the output for training and testing the BP neural network.The mean relative errors(MREs)of the zirconium thickness in the training and test datasets were 0.56%and 0.42%,respectively,whereas the MREs of the tritium-to-zirconium ratio were 0.59%and 0.38%,respectively.Furthermore,the trained BP neural network demonstrates excellent predictive capability across various levels of statistical uncertainty.For the experimentalβ-decay X-ray spectra of two tritium-containing samples,the predicted zirconium thicknesses and tritium-to-zirconium ratios showed good agreement with the results obtained through the elastic backscattering spectrometry(EBS).
基金Project supported by the National Natural Science Foundation of China (No. 51109092)the National Science Foundation for Post-doctoral Scientists of China (No. 2013M530237)the Jiangsu University Foundation for Advanced Talents (No. 12JDG098), China
文摘Based on the non-Darcian flow law described by exponent m and threshold gradient i 1 under a low hydraulic gradient and the classical nonlinear relationships e-lgσ′ and e-lgk v (Mesri and Rokhsar, 1974), the governing equation of 1D nonlinear consolidation was modified by considering both uniform distribution of self-weight stress and linear increment of self-weight stress. The numerical solutions for the governing equation were derived by the finite difference method (FDM). Moreover, the solutions were verified by comparing the numerical results with those by analytical method under a specific case. Finally, consolidation behavior under different parameters was investigated, and the results show that the rate of 1D nonlinear consolidation will slow down when the non-Darcian flow law is considered. The consolidation rate with linear increment of self-weight stress is faster than that with uniform distribution one. Compared to Darcy's flow law, the influence of parameters describing non-linearity of soft soil on consolidation behavior with non-Darcian flow has no significant change.
基金Supported by the Major State Basic Research Development Program of China（2011CB706501）the National Natural Science Foundation of China（51176164）
文摘Nonuniform flow distribution along the radial direction usually exists in a Z-flow type radial flow adsorber,which will decrease the utilization of adsorbent and the switching time and may result in operating safety problems in cryogenic air separation.In order to improve the uniformity of the flow distribution along the radial direction in the adsorber,a differential equation is derived through pressure drop analysis in the Z-flow type radial adsorber with a cone in the middle of the central pipe.The differential equation determines the ideal cross-sectional radii of the cone along the axis.The result shows that the cross-sectional radius of the cone should gradually decrease from 0.3 m to zero along the axis to ensure that the process air is distributed uniformly in the Z-flow type radial flow adsorber and the shape of the cone is a little convex.The flow distribution without the cone in the central pipe is compared under different bed porosities.It is demonstrated that the proposed differential equation can provide theoretical support for designing Z-flow type radial flow adsorbers.
文摘W-2 wt.%Y2O3 composite material with uniform distribution of yttrium element was fabricated through processes of mechanical alloying （MA） and spark plasma sintering （SPS）. The relevant productions were characterized by scanning electron microscopy （SEM）, energy dispersive spectroscopy （EDS）, X-ray diffraction （XRD）, and transmission electron microscopy （TEM）. The XRD showed that the W-2 wt.%Y2O3 composite powder, including tungsten matrix and Y2O3 particles, was refined to nanometer sizes during the MA process. The SEM and TEM micrographs showed that the MA produced composite powder presented a lamellar morphology and contained many dislocations and microcracks. The EDS showed that the Y and O elements were uniformly distributed in the W matrix after mechanically alloying for 15 h. The W-2 wt.%Y2O3 composite material with uniform distribution of yttrium was obtained by sintering of the MA produced composite powder.
基金Financial supports from National Nature Science Foundation of China(NSFC,Nos.91634120 and 21521005)the National Key Research and Development Program of China(No.2017YFA0206804)the Fundamental Research Funds for the Central Universities(No.XK1802-6)。
文摘Supported NiCu bimetallic catalysts have been produced in-situ on commercial Al_(2)O_(3)by using layered double hydroxides as precursors.The resulting catalysts show a uniform Ni and Cu distribution,thus providing good activity and selectivity in the reforming reaction of n-heptane.The catalytic performance has been found to depend on the Cu/Ni ratio,revealing the synergic catalysis between homogeneously dispersed Ni and Cu sites.The good catalysis of Ni Cu bimetallic catalysts makes it possible to partly or even completely replace Pt with NiCu bimetallic catalysts.
基金Supported by National Natural Science Foundation of China （19871047）and National Key Basic Research Special Fund（1998020306）.
文摘The generation of good pseudo-random numbers is the base of many important fields in scientific computing, such as randomized algorithms and numerical solution of stochastic differential equations. In this paper, a class of random number generators （RNGs） based on Weyl sequence is proposed. The uniformity of those RNGs is proved theoretically. Statistical and numerical computations show the efficiency of the methods.
基金Project supported by the National Natural Science Foundation of China (No.19871053)
文摘A level-value estimation method was illustrated for solving the constrained global optimization problem. The equivalence between the root of a modified variance equation and the optimal value of the original optimization problem is shown. An alternate algorithm based on the Newton＇s method is presented and the convergence of its implementable approach is proved. Preliminary numerical results indicate that the method is effective.
文摘High-speed, high-accuracy data converters are attractive for use in most RF applications. Such converters allow direct conversion to occur between the digital baseband and the antenna. However, high speed and high accuracy make the analog components in a converter more complex, and this complexity causes more power to be dissipated than if a traditional approach were taken. A static calibration technique for flash analog-to-digital converters （ADCs） is discussed in this paper. The calibration is based onhistogram test methods, and equivalent errors in the flash ADC comparators are estimated in the digital domain without any significant changes being made to the ADC comparators. In the trimming process, reference voltages are adjusted to compensate for static errors. Behavioral-level simulations of a moderate-resolution 8-bit flash ADC show that, for typical errors, ADC performance is considerably improved by the proposed technique. As a result of calibration, the differential no.nlinearities （DNLs） are reduced on average from 4 LSB to 0.5 LSB, and the integral nonlinearities （INLs） are reduced on average from 4.2 LSB to 0.35 LSB. Implementation issues for this proposed technique are discussed in our subsequent paper, “A Histogram-Based Static-Error Correction Technique for Flash ADCs： Implementation Aspects. ”
文摘The random step maneuver with uniformly distributed starting times has the disadvantage that it cannot focus the starting time on the more efficiency time. It decreases the penetration probability. To resolve this problem, a random step penetration algorithm with normal distribution starting time is proposed. Using the shaping filters and adjoint system method, the miss distance with different starting times can be acquired. According to the penetration standard, the time window ensuring successful penetration can be calculated and it is used as the 3σ bound of the normally distributed random maneuver. Simulation results indicate that the normally distributed random maneuver has higher penetration probability than the uniformly distributed random maneuver.
