期刊文献+
共找到232篇文章
< 1 2 12 >
每页显示 20 50 100
The Role of β-effect and a Uniform Current on Tropical Cyclone Intensity 被引量:9
1
作者 端义宏 伍荣生 +2 位作者 余晖 梁旭东 陈仲良 《Advances in Atmospheric Sciences》 SCIE CAS CSCD 2004年第1期75-86,共12页
A limited-area primitive equation model is used to study the role of the β-effect and a uniform current on tropical cyclone (TC) intensity. It is found that TC intensity is reduced in a non-quiescent environment comp... A limited-area primitive equation model is used to study the role of the β-effect and a uniform current on tropical cyclone (TC) intensity. It is found that TC intensity is reduced in a non-quiescent environment compared with the case of no uniform current. On an f-plane, the rate of intensification of a tropical cyclone is larger than that of the uniform flow. A TC on a β-plane intensifies slower than one on an f-plane. The main physical characteristic that distinguishes the experiments is the asymmetric thermodynamic (including convective) and dynamic structures present when either a uniform flow or β-effect is introduced. But a fairly symmetric TC structure is simulated on an f-plane. The magnitude of the warm core and the associated subsidence are found to be responsible for such simulated intensity changes. On an f-plane, the convection tends to be symmetric, which results in strong upper-level convergence near the center and hence strong forced subsidence and a very warm core. On the other hand, horizontal advection of temperature cancels part of the adiabatic heating and results in less warming of the core, and hence the TC is not as intense. This advective process is due to the tilt of the vortex as a result of the β-effect. A similar situation occurs in the presence of a uniform flow. Thus, the asymmetric horizontal advection of temperature plays an important role in the temperature distribution. Dynamically, the asymmetric angular momentum (AM) flux is very small on an f-plane throughout the troposphere. However, the total AM exports at the upper levels for a TC either on a β-plane or with a uniform flow environment are larger because of an increase of the asymmetric as well as symmetric AM export on the plane at radii >450 km, and hence there is a lesser intensification. 展开更多
关键词 β-effect uniform current asymmetric structure tropical cyclone intensity change
在线阅读 下载PDF
The patterns of surface capillary-gravity short-crested waves with uniform current fields in coastal waters 被引量:3
2
作者 Hu Huang Jia Fu 《Acta Mechanica Sinica》 SCIE EI CAS CSCD 2006年第5期433-441,共9页
A fully three-dimensional surface gravitycapillary short-crested wave system is studied as two progressive wave-trains of equal amplitude and frequency, which are collinear with uniform currents and doubly-periodic in... A fully three-dimensional surface gravitycapillary short-crested wave system is studied as two progressive wave-trains of equal amplitude and frequency, which are collinear with uniform currents and doubly-periodic in the horizontal plane, are propagating at an angle to each other. The first- and second-order asymptotic analytical solutions of the short-crested wave system are obtained via a perturbation expansion in a small parameter associated with the wave steepness, therefore depicting a series of typical three-dimensional wave patterns involving currents, shallow and deep water, and surface capillary waves, and comparing them with each other. 展开更多
关键词 Short-crested waves uniform currents PATTERNS Surface capillary-gravity waves Finite depth and deep water
在线阅读 下载PDF
Second-Order Solutions for Random Interfacial Waves Under Steady Uniform Currents 被引量:3
3
作者 宋金宝 《China Ocean Engineering》 SCIE EI 2005年第2期333-338,共6页
In the present research, the study of Song (2004) for random interfacial waves in two-layer fluid is extended to the case of fluids moving at different steady uniform speeds. The equations describing the random displa... In the present research, the study of Song (2004) for random interfacial waves in two-layer fluid is extended to the case of fluids moving at different steady uniform speeds. The equations describing the random displacements of the density interface and the associated velocity potentials in two-layer fluid are solved to the second order, and the wave-wave interactions of the wave components and the interactions between the waves and currents are described. As expected, the extended solutions include those obtained by Song (2004) as one special case where the steady uniform currents of the two fluids are taken as zero, and the solutions reduce to those derived by Sharma and Dean (1979) for random surface waves if the density of the upper fluid and the current of the lower fluid are both taken as zero. 展开更多
关键词 two-layer fluid uniform current random interfacial waves second-order solutions
在线阅读 下载PDF
Second-order solutions for random interfacial waves in N-layer density-stratified fluid with steady uniform currents
4
作者 陈小刚 郭志萍 宋金宝 《Chinese Physics B》 SCIE EI CAS CSCD 2008年第9期3387-3393,共7页
In the present paper, the random interfacial waves in N-layer density-stratified fluids moving at different steady uniform speeds are researched by using an expansion technique, and the second-order asymptotic solutio... In the present paper, the random interfacial waves in N-layer density-stratified fluids moving at different steady uniform speeds are researched by using an expansion technique, and the second-order asymptotic solutions of the random displacements of the density interfaces and the associated velocity potentials in N-layer fluid are presented based on the small amplitude wave theory. The obtained results indicate that the wave-wave second-order nonlinear interactions of the wave components and the second-order nonlinear interactions between the waves and currents are described. As expected, the solutions include those derived by Chen (2006) as a special case where the steady uniform currents of the N-layer fluids are taken as zero, and the solutions also reduce to those obtained by Song (2005) for second-order solutions for random interfacial waves with steady uniform currents if N = 2. 展开更多
关键词 N-layer density-stratified fluid uniform currents random interracial waves secondorder solutions
原文传递
Research on the Effects of in-Line Oscillatory Flow on the Vortex-Induced Motions of A Deep Draft Semi-Submersible in Currents
5
作者 WU Fan XIAO Long-fei +1 位作者 LIU Ming-yue TIAN Xin-liang 《China Ocean Engineering》 SCIE EI CSCD 2017年第3期272-283,共12页
A Deep Draft Semi-submersible (DDS) under certain flow conditions could be subjected to Vortex-Induced Motions (VIM), which significantly influences the loads on and life fatigue of the moorings and the risers. To... A Deep Draft Semi-submersible (DDS) under certain flow conditions could be subjected to Vortex-Induced Motions (VIM), which significantly influences the loads on and life fatigue of the moorings and the risers. To investigate the VIM of a DDS with four rectangular section columns in waves coupled with a uniform current, a numerical study using the computational fluid dynamics (CFD) method was conducted. The issues of the VIM of multi-column floaters can be con','eniently converted to the issues of oscillating cylinders in fluid cross flows. This paper looks into the CFD numerical simulation of infinite cylinders having rectangular sections in a two-dimensional sinusoidal time- dependent flow field coupled with a uniform current. The resulted hydrodynamic forces and motion responses in different oscillatory flows plus currents both aligned in the same direction for the incidence of 135° of the DDS relative to the flow are compared with the ones in current only cases. The results show that the VIM response of this geometric arrangement of a DDS with four rectangular columns in a current combined with oscillatory flows is more evident than that in the current only case. The oscillatory flows and waves have the significant influence on the VIM response, forces and trajectory, in-plane motions of the DDS. 展开更多
关键词 Vortex-Induced Motion (VIM) deep draft semi-submersible numerical simulation oscillatory flow uniform current
在线阅读 下载PDF
基于GMM-FBG的电流互感器优化设计
6
作者 邸志刚 陈志鹏 +1 位作者 贾春荣 张聪哲 《现代电子技术》 北大核心 2026年第6期1-6,14,共7页
GMM-FBG电流互感器具有精度高、体积小、不易磁饱和等优点,近年来受到广泛关注。该互感器的测量本质是磁场-应变-光学的多物理量耦合传递测量过程,因此传感磁路的设计直接影响其测量精度。基于此,提出一种基于传感磁路均匀磁场分布的GMM... GMM-FBG电流互感器具有精度高、体积小、不易磁饱和等优点,近年来受到广泛关注。该互感器的测量本质是磁场-应变-光学的多物理量耦合传递测量过程,因此传感磁路的设计直接影响其测量精度。基于此,提出一种基于传感磁路均匀磁场分布的GMM-FBG电流互感器方案,通过对驱动线圈、偏置磁场和导磁回路等传感磁路组件进行设计,并以驱动线圈内部轴向磁场强度均匀度为评价标准对磁路结构参数优化,获得轴向磁场强度均匀度达96.03%的传感磁路。同时,对0~6 A的工频电流进行测量,结果表明,所设计的GMM-FBG电流互感器的测量误差为0.163%,满足电流互感器国标0.2级精度要求。所提方案实现了对工频小电流的精确测量,能够有效提高测量精度,具有重要的工程应用价值。 展开更多
关键词 GMM-FBG 电流互感器 磁场均匀度 驱动线圈 传感磁路 有限元法 工频电流
在线阅读 下载PDF
直流偏磁闭磁路电压互感器磁通分布均匀性多目标优化方法
7
作者 唐贤敏 李金友 +2 位作者 李鸿 王俊融 李强 《微电机》 2026年第1期49-54,共6页
直流偏磁闭磁路中的容抗与感抗发生变化时,产生谐振现象,导致电压互感器产生较大的励磁电流,严重影响电压互感器磁通分布均匀性,对此,提出直流偏磁闭磁路电压互感器磁通分布均匀性多目标优化方法。分析大地电位分布情况,设置电势边界条... 直流偏磁闭磁路中的容抗与感抗发生变化时,产生谐振现象,导致电压互感器产生较大的励磁电流,严重影响电压互感器磁通分布均匀性,对此,提出直流偏磁闭磁路电压互感器磁通分布均匀性多目标优化方法。分析大地电位分布情况,设置电势边界条件,计算磁场强度作为均匀性优化指标。计算直流偏磁情况下的综合误差,选用电阻型隔直装置,抑制直流偏磁;计算中性点位移电压,选用阻尼滑动电阻作为消谐装置,抑制电压互感器铁磁谐振。以最小化磁场强度指标偏差、降低直流偏磁综合误差、降低中性点位移电压作为优化目标,利用精英保留策略与模拟二进制交叉的多目标优化方法,连续调整电压互感器参数,使电压互感器磁场强度达到最优状态,实现电压互感器磁通分布均匀性的多目标优化。实验结果表明:电压互感器工作过程中,中性点位移电压的幅值变化范围为70V,提升了磁通分布均匀概率,有效减少励磁电流的产生。 展开更多
关键词 励磁电流 分布均匀性 多目标优化 直流偏磁 铁磁谐振
在线阅读 下载PDF
Two-Dimensional Mathematical Model of Tidal Current and Sediment for Oujiang Estuary and Wenzhou Bay 被引量:8
8
作者 陆永军 李浩麟 +2 位作者 董壮 陆建宇 郝嘉凌 《China Ocean Engineering》 SCIE EI 2002年第1期107-122,共16页
A 2-D mathematical model of tidal current and sediment has been developed for the Oujiang Estuary and the Wenzhou Bay. This model accomodates complicated features including multiple islands, existence of turbidity, an... A 2-D mathematical model of tidal current and sediment has been developed for the Oujiang Estuary and the Wenzhou Bay. This model accomodates complicated features including multiple islands, existence of turbidity, and significant differ-ence in size distribution of bed material. The governing equations for non-uniform suspended load and bed load transport are presented in a boundary-fitted orthogonal curvilinear coordinate system. The numerical solution procedures along with their initial conditions, boundary conditions, and movable boundary technique are presented. Strategies for computation of the critical condition of deposition or erosion, sediment transport capacity, non-uniform bed load discharge, etc. are suggested. The model verification computation shows that, the tidal levels computed from the model are in good agreement with the field data at the 18 tidal gauge stations. The computed velocities and flow directions also agree well with the values measured along the totally 52 synchronously observed verticals distributed over 8 cross sections. The coraputed tidal water throughputs through the Huangda'ao cross section are close to the measured data. And the computed values of bed deformation from Yangfushan to the estuary outfall and in the outer-sea area are in good agreement with the data observed from 1986 to 1992. The changes of tidal volumes through the estuary, velocities in different channels and the bed form due to the influence of the reclamation project on the Wenzhou shoal are predicted by means of this model. 展开更多
关键词 mathematical model tidal current non-uniform suspended load non-uniform bed load non-equilibrium transport bed deformation
在线阅读 下载PDF
Analysis of non-uniform hetero-gate-dielectric dual-material control gate TFET for suppressing ambipolar nature and improving radio-frequency performance
9
作者 Hui-Fang Xu Jian Cui +1 位作者 Wen Sun Xin-Feng Han 《Chinese Physics B》 SCIE EI CAS CSCD 2019年第10期571-578,共8页
A tunnel field-effect transistor(TFET) is proposed by combining various advantages together, such as non-uniform gate-oxide layer, hetero-gate-dielectric(HGD), and dual-material control-gate(DMCG) technology. The effe... A tunnel field-effect transistor(TFET) is proposed by combining various advantages together, such as non-uniform gate-oxide layer, hetero-gate-dielectric(HGD), and dual-material control-gate(DMCG) technology. The effects of the length of non-uniform gate-oxide layer and dual-material control-gate on the on-state, off-state, and ambipolar currents are investigated. In addition, radio-frequency performance is studied in terms of gain bandwidth product, cut-off frequency,transit time, and transconductance frequency product. Moreover, the length of non-uniform gate-oxide layer and dualmaterial control-gate are optimized to improve the on-off current ratio and radio-frequency performances as well as the suppression of ambipolar current. All results demonstrate that the proposed device not only suppresses ambipolar current but also improves radio-frequency performance compared with the conventional DMCG TFET, which makes the proposed device a better application prospect in the advanced integrated circuits. 展开更多
关键词 NON-uniform gate-oxide layer AMBIPOLAR current RADIO-FREQUENCY PERFORMANCES TUNNEL fieldeffect transistor
原文传递
探讨定速旋转的均匀带电球壳激发的磁场
10
作者 朱孟正 赵春然 《大学物理》 2025年第5期11-14,25,共5页
本文运用电磁场理论的基础知识,研究定速旋转均匀带电球壳在全空间的磁场分布.首先由于电流分布具有对称性,对应的磁场呈轴对称性;直接根据毕奥-萨伐尔定律写出了某点磁感应强度的两个分量,并进行了数值模拟,计算球壳内、外的磁场,结果... 本文运用电磁场理论的基础知识,研究定速旋转均匀带电球壳在全空间的磁场分布.首先由于电流分布具有对称性,对应的磁场呈轴对称性;直接根据毕奥-萨伐尔定律写出了某点磁感应强度的两个分量,并进行了数值模拟,计算球壳内、外的磁场,结果显示球壳内部为均匀磁场.其次,利用磁标势和磁多极方法分别讨论了该磁场,通过对比球壳外磁场发现了该问题中电流分布具有一定的特殊性.最后讨论了单根通以恒定电流的细导线紧致无堆叠的缠绕而成的球壳激发的磁场. 展开更多
关键词 恒定磁场 匀强磁场 环形电流
在线阅读 下载PDF
基于驱动导体环的板件电磁成形电磁力分布与成形效果研究 被引量:7
11
作者 李梦瑶 邱立 +2 位作者 易宁轩 何晨骏 李高宁 《电工技术学报》 北大核心 2025年第1期13-24,共12页
为实现电磁成形中电磁力的可控加载,提升板件成形效果,该文提出一种基于驱动导体环的板件电磁成形技术。该技术在板件与驱动线圈之间引入一驱动环,通过改变驱动环的材料参数与几何参数实现电磁力的调控。基于特定的AA1060铝板(铝板半径7... 为实现电磁成形中电磁力的可控加载,提升板件成形效果,该文提出一种基于驱动导体环的板件电磁成形技术。该技术在板件与驱动线圈之间引入一驱动环,通过改变驱动环的材料参数与几何参数实现电磁力的调控。基于特定的AA1060铝板(铝板半径70 mm,铝板成形区域半径50 mm)进行了仿真研究。仿真数据表明,驱动导体环的材质和几何结构的变化可以改变感应涡流从而实现电磁力的调控。与传统板件电磁成形相比,基于驱动导体环的板件电磁成形均匀成形范围Dr提高了1.61倍。在仿真基础上,通过驱动导体环板件电磁成形实验验证了仿真模型的可靠性。综上所述,基于驱动导体环的电磁成形技术能有效提高板件成形的均匀度。 展开更多
关键词 电磁成形 驱动导体环 感应涡流 电磁力 均匀度
在线阅读 下载PDF
电参数对合金镀铁基体表面活化均匀性的影响
12
作者 刘勇 董文仲 《电镀与精饰》 北大核心 2025年第4期7-12,25,共7页
在发动机曲轴轴颈表面制备铁基合金镀层时,镀层与曲轴基体表面的结合强度是制约镀层发挥其性能的关键因素。在电镀初始阶段,曲轴基体表面是否得到有效均匀活化是影响镀层与基体结合强度的关键因素。铁基镍钴合金镀铁液中,NiCl_(2)·... 在发动机曲轴轴颈表面制备铁基合金镀层时,镀层与曲轴基体表面的结合强度是制约镀层发挥其性能的关键因素。在电镀初始阶段,曲轴基体表面是否得到有效均匀活化是影响镀层与基体结合强度的关键因素。铁基镍钴合金镀铁液中,NiCl_(2)·6H_(2)O和CoCl_(2)·6H_(2)O浓度分别为80 g/L及30 g/L,镀液相对质量密度1.22~1.23,镀液温度40℃~50℃,镀液pH值0.6~0.7。在保持阴阳极面积匹配、电极距离和活化时间等工艺规范相同的条件下,通过调整正负向电压和电流密度进行电化学活化处理,对采用不同电压差和电流密度进行活化后的轴颈表面状态及制备的镀层金相进行了对比、研究。结果表明:保持正向电压5 V,正向电压比负向电压高出0.2 V,电流密度取5 A/dm^(2)时,活化处理3 min,基体表面可实现有效均匀活化,活化处理后制备的镀层与基体界面无缺陷,获得了高结合强度的沉积层。 展开更多
关键词 铁基合金镀层 发动机曲轴 均匀活化 正负向电压差 电流密度
在线阅读 下载PDF
封装载板VCP电镀阳极两片连接对均匀性的影响机制研究 被引量:1
13
作者 简杨洋 周涛 +2 位作者 罗奇 许静平 李志东 《印制电路信息》 2025年第S1期172-178,共7页
在封装载板制造过程中,垂直连续电镀(Vertical Continuous Plating)技术因其高效和稳定的电镀性能而被广泛应用。然而,电镀层的均匀性问题一直是影响产品质量的关键因素。本文研究了VCP电镀阳极两片连接对电镀均匀性的影响机制。通过理... 在封装载板制造过程中,垂直连续电镀(Vertical Continuous Plating)技术因其高效和稳定的电镀性能而被广泛应用。然而,电镀层的均匀性问题一直是影响产品质量的关键因素。本文研究了VCP电镀阳极两片连接对电镀均匀性的影响机制。通过理论研究与实验验证相结合的方法,探讨了不同阳极连接方式下电流密度分布的变化及其对电镀层厚度均匀性的影响。研究发现,相邻阳极盒间直接连接能够显著提高电流分布的均匀性,从而改善电镀铜层的厚度均匀性,为提升VCP电镀工艺的均匀性提供了理论依据和实践指导。 展开更多
关键词 VCP 阳极连接 电镀均匀性 电流分布 封装载板
在线阅读 下载PDF
基于脉冲电流信号的大型电力变压器极不均匀电场油隙贯穿性放电特性 被引量:1
14
作者 任达 郑玉平 +1 位作者 李斯盟 潘书燕 《中国电机工程学报》 北大核心 2025年第9期3332-3345,I0005,共15页
为深入研究大型电力变压器真实环境中的极不均匀电场严重放电特性,该文搭建110 kV真型变压器试验平台,监测油纸绝缘针板电极放电发展过程,对放电现象分类归纳,总结油隙贯穿性放电的脉冲电流信号特征,结合特高频信号进一步探索不同极性... 为深入研究大型电力变压器真实环境中的极不均匀电场严重放电特性,该文搭建110 kV真型变压器试验平台,监测油纸绝缘针板电极放电发展过程,对放电现象分类归纳,总结油隙贯穿性放电的脉冲电流信号特征,结合特高频信号进一步探索不同极性下油隙贯穿性放电通道的演变过程。结果表明:在油纸绝缘结构中,存在纸板屏障下的油隙击穿现象,是严重放电的重要表现;在极不均匀电场中,不同极性的油隙贯穿性放电形貌存在明显差异且呈现出不同序列的簇状脉冲电流特征;油隙贯穿性放电通道演变过程有着类似长空气间隙放电过程,正极性油隙贯穿性放电通道演变过程可以划分为初始电晕向放电通道转换和连续放电通道发展两个阶段,其中连续放电通道发展过程中可能出现放电通道熄灭现象;负极性油隙贯穿性放电通道演变过程可以划分为初始电晕和连接过程两个阶段,连接过程中伴随有不等时间间隔的空间梯级放电。结果可为大型电力变压器放电特性试验以及物理模型研究提供参考。 展开更多
关键词 大型电力变压器 油隙贯穿性放电 放电通道 脉冲电流 极不均匀电场
原文传递
基于叶轮出流均匀度优化的风机降噪研究
15
作者 李鹏程 李景银 唐洁 《中南大学学报(自然科学版)》 北大核心 2025年第9期3934-3946,共13页
提出了一种旋转扩压器耦合蜗舌进口轴向导叶的新型结构,用于抑制蜗壳内涡流的形成与发展,降低风机噪声。此外,为对低噪离心风机进行优化设计,提出将离心叶轮出口速度分布的均匀度作为衡量叶轮出口高速射流结构引发风机气动噪声的特征指... 提出了一种旋转扩压器耦合蜗舌进口轴向导叶的新型结构,用于抑制蜗壳内涡流的形成与发展,降低风机噪声。此外,为对低噪离心风机进行优化设计,提出将离心叶轮出口速度分布的均匀度作为衡量叶轮出口高速射流结构引发风机气动噪声的特征指标,采用流场优化设计以减少非定常噪声计算的耗时,并使用径向基神经网络构建代理模型和多岛遗传算法进行寻优。研究结果表明:原风机叶轮出口下游的高速射流结构和蜗舌进口靠近蜗壳前端面处的大尺度漩涡是诱发风机噪声的根本原因;叶轮出口速度均匀度可以很好地表征风机噪声,相较于原风机,优化后的风机叶轮出流均匀度得到明显提高,风机声功率级下降了11.86 dB,总压效率提高了4.68%。优化后,叶片尾缘吸力面处的分离涡消失,叶轮出口下游的高速射流结构消失,蜗舌进口的漩涡尺寸明显减小。 展开更多
关键词 涡流抑制 均匀度 静压能 降噪设计 导叶
在线阅读 下载PDF
圆盘对折式涡流盘SCR脱硝系统试验研究
16
作者 田绍钢 葛铭 +3 位作者 刘晓东 周传明 骆宏飞 王学永 《锅炉技术》 北大核心 2025年第3期78-84,共7页
从试验和模拟两方面对圆盘对折式涡流盘脱硝系统进行了研究。模拟结果显示对折式涡流盘结构优于倾斜式结构。试验表明:在脱硝系统流场结构优化的基础上,对折式涡流盘脱硝系统进出口流速分布不均匀度能够降低到20%以下。在流场均匀性较... 从试验和模拟两方面对圆盘对折式涡流盘脱硝系统进行了研究。模拟结果显示对折式涡流盘结构优于倾斜式结构。试验表明:在脱硝系统流场结构优化的基础上,对折式涡流盘脱硝系统进出口流速分布不均匀度能够降低到20%以下。在流场均匀性较高的前提下,圆盘对折式涡流盘结构能够实现较为均匀的氨与烟气混合。脱硝出口NO_(x)浓度分布不均匀度能降低到30%以下。喷氨优化调整结束后的对折式涡流盘脱硝系统在净烟气NO_(x)排放控制在10 mg/m^(3)时,脱硝出口氨逃逸浓度仍能控制在3μL/L以下。在此前提下,电厂能够将净烟气NO_(x)排放浓度均值控制在15 mg/m^(3)左右,并保证机组长期可靠运行。圆盘对折式涡流盘脱硝系统能够达到分区控制喷氨格栅的效果,同时还具有喷氨口不易堵、反应速度快的优点。圆盘对折式涡流盘结构是未来脱硝系统改造的方向之一。 展开更多
关键词 静态混合器 SCR脱硝 圆盘对折式涡流盘 喷氨均匀性 氨逃逸
在线阅读 下载PDF
有限长直导线在非匀强磁场中的运动
17
作者 鲁海鹏 《大学物理》 2025年第9期39-43,共5页
在一定近似条件下,利用大学物理力学知识分析求解了长为L通有电流I的导线在长直电流激发的非匀强磁场中受到的合外力和合外力矩,通过数值方法求解得到了导线质心C的运动轨迹和导线转动角度的变化,进一步研究了导线在一个转动周期内的运... 在一定近似条件下,利用大学物理力学知识分析求解了长为L通有电流I的导线在长直电流激发的非匀强磁场中受到的合外力和合外力矩,通过数值方法求解得到了导线质心C的运动轨迹和导线转动角度的变化,进一步研究了导线在一个转动周期内的运动轨迹,并从速度参量和加速度参量的变化分析原因. 展开更多
关键词 直导线 长直电流 非匀强磁场
在线阅读 下载PDF
均匀流中深水系泊Truss Spar平台涡激运动试验研究 被引量:10
18
作者 张蕙 杨建民 +1 位作者 肖龙飞 杨立军 《海洋工程》 CSCD 北大核心 2011年第4期14-20,共7页
在工程中广泛应用的Truss Spar平台自诞生之初就为涡激运动问题所困扰,对其运动特性及抑制方法的机理性研究始终都在进行。采用截断系泊系统水池模型试验对设计中的Truss Spar平台在均匀流中的涡激运动响应进行了研究,分析了有无侧板平... 在工程中广泛应用的Truss Spar平台自诞生之初就为涡激运动问题所困扰,对其运动特性及抑制方法的机理性研究始终都在进行。采用截断系泊系统水池模型试验对设计中的Truss Spar平台在均匀流中的涡激运动响应进行了研究,分析了有无侧板平台的运动轨迹以及不同速度及流向角来流对平台运动的平衡位置的影响。在影响平台涡激运动特性的重要因素中,选取折合速度及流向角分别加以研究,分析了幅值在锁定区间中的变化规律,验证了减涡侧板对涡激运动良好的抑制作用,并对"热点"问题进行了探讨。为进一步研究Spar平台的涡激运动特性奠定了基础。 展开更多
关键词 TRUSS Spar 涡激运动 模型试验 均匀来流
在线阅读 下载PDF
辅助阴极对电铸微模芯厚度均匀性的影响 被引量:7
19
作者 吕辉 徐腾飞 +2 位作者 刘佳 黎醒 蒋炳炎 《电镀与涂饰》 CAS CSCD 北大核心 2014年第17期732-736,共5页
用Ansys有限元软件对微透镜阵列模芯电铸过程中的电场线分布进行模拟分析,研究了辅助阴极的尺寸对电流密度分布的影响,预测了电铸模芯厚度均匀性的变化趋势。分析发现,辅助阴极能提高电铸模芯厚度的均匀性,当框形辅助阴极与母板阴极的... 用Ansys有限元软件对微透镜阵列模芯电铸过程中的电场线分布进行模拟分析,研究了辅助阴极的尺寸对电流密度分布的影响,预测了电铸模芯厚度均匀性的变化趋势。分析发现,辅助阴极能提高电铸模芯厚度的均匀性,当框形辅助阴极与母板阴极的边长之比为1.5时,模芯表面的电流密度相对偏差由无辅助阴极时的82.8%降低至10.1%。通过电铸实验对模拟结果进行验证。结果表明,所得铸层厚度偏差可降低到18.89%,与模拟分析结果较为一致。电铸成型所得1 mm厚的微透镜阵列模芯厚度均匀,微观形貌与母板一致,可应用于微注塑成型工艺。 展开更多
关键词 微透镜阵列 微模芯 电铸 辅助阴极 数值仿真 厚度均匀性 电流密度分布
在线阅读 下载PDF
潜堤上波流传播的完全非线性数值模拟 被引量:6
20
作者 陈丽芬 宁德志 +1 位作者 滕斌 宋伟华 《力学学报》 EI CSCD 北大核心 2011年第5期834-843,共10页
利用时域高阶边界元方法建立模拟波流混合作用的完全非线性数值水槽模型,其中自由水面满足完全非线性自由水面条件.采用混合欧拉-拉格朗日方法追踪流体瞬时水面,运用4阶Runge-Kutta方法更新下一时间步的波面和速度势.为了减少计算域,提... 利用时域高阶边界元方法建立模拟波流混合作用的完全非线性数值水槽模型,其中自由水面满足完全非线性自由水面条件.采用混合欧拉-拉格朗日方法追踪流体瞬时水面,运用4阶Runge-Kutta方法更新下一时间步的波面和速度势.为了减少计算域,提高计算速度,采用同时消除底面和侧面的镜像格林函数;在每一时间步内,对网格进行重新划分以避免由于网格运动变形而引起的数值不稳定问题.对水流中淹没潜堤上的波浪变形在水槽中开展了物理模型试验,并把试验结果和数值结果进行了对比,吻合得很好.进一步研究了水流及潜堤的存在对高阶谐波产生的影响. 展开更多
关键词 数值波浪水槽 时域高阶边界元 完全非线性 均匀水流 潜堤
在线阅读 下载PDF
上一页 1 2 12 下一页 到第
使用帮助 返回顶部