期刊文献+
共找到1,336篇文章
< 1 2 67 >
每页显示 20 50 100
Preparation of Si/NC/CL-20 Composite Explosives by Electrostatic Spraying Method and Its Performance Characterization
1
作者 DUAN Yi-long WANG Ling-xin +3 位作者 DONG Jun LI Xiu-long HE Xi JI Wei 《火炸药学报》 北大核心 2025年第5期424-429,I0001,共7页
To study the influence of silicon(Si)on 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane(CL-20),NC/CL-20 composite explosives and Si/NC/CL-20 composite explosives were prepared by the electrostatic spraying ... To study the influence of silicon(Si)on 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane(CL-20),NC/CL-20 composite explosives and Si/NC/CL-20 composite explosives were prepared by the electrostatic spraying method.The morphology,structure and thermal decomposition properties of the samples were analyzed using scanning electron microscopy(SEM),X-ray energy spectroscopy(EDS),infrared spectroscopy(FT-IR),and simultaneous thermal analyzer(TG-DSC).Additionally,the combustion process of the samples was tested using a high-speed camera.The results show that the addition of nano-Si contributes to the formation of composite explosives with regular morphology and smaller particle size.The Si/NC/CL-20 composite explosive has better and more uniform sphericity,with an average particle size of 73.4 nm,compared to the NC/CL-20 composite explosive.The Si/NC/CL-20 composite explosive which produced by the electrostatic spraying method,achieves physically uniform distribution of the components including NC,CL-20,Si.The addition of Si promotes the thermal decomposition of CL-20.In comparison to the NC/CL-20 composite explosive,the activation energy of the Si/NC/CL-20 composite explosive decreases by 16.78 kJ/mol,and the self-accelerated decomposition temperature and the critical temperature of thermal explosion decreases by 3.12 K and 2.61 K,respectively.Furthermore,Si/NC/CL-20 composite explosive has shorter ignition delay time and faster combustion rate compared to the NC/CL-20 composite explosive,which shows that Si can improve the combustion performance of CL-20. 展开更多
关键词 applied chemistry electrostatic spraying method SI Si/NC/CL-20 thermal decomposition performance combustion performance
在线阅读 下载PDF
Novel adaptive IMEX two-step Runge-Kutta temporal discretization methods for unsteady flows
2
作者 Xueyu QIN Jian YU +2 位作者 Xin ZHANG Zhenhua JIANG Chao YAN 《Chinese Journal of Aeronautics》 2025年第8期142-153,共12页
Efficient and accurate simulation of unsteady flow presents a significant challenge that needs to be overcome in computational fluid dynamics.Temporal discretization method plays a crucial role in the simulation of un... Efficient and accurate simulation of unsteady flow presents a significant challenge that needs to be overcome in computational fluid dynamics.Temporal discretization method plays a crucial role in the simulation of unsteady flows.To enhance computational efficiency,we propose the Implicit-Explicit Two-Step Runge-Kutta(IMEX-TSRK)time-stepping discretization methods for unsteady flows,and develop a novel adaptive algorithm that correctly partitions spatial regions to apply implicit or explicit methods.The novel adaptive IMEX-TSRK schemes effectively handle the numerical stiffness of the small grid size and improve computational efficiency.Compared to implicit and explicit Runge-Kutta(RK)schemes,the IMEX-TSRK methods achieve the same order of accuracy with fewer first derivative calculations.Numerical case tests demonstrate that the IMEX-TSRK methods maintain numerical stability while enhancing computational efficiency.Specifically,in high Reynolds number flows,the computational efficiency of the IMEX-TSRK methods surpasses that of explicit RK schemes by more than one order of magnitude,and that of implicit RK schemes several times over. 展开更多
关键词 Implicit-explicit temporal methods two-step Runge-Kutta methods Adaptive algorithm Unsteady flows Navier-Stokes equations
原文传递
Growth of CuI buffer layer prepared by spraying method
3
作者 阎有花 刘迎春 +3 位作者 方玲 卢志超 李正邦 周少雄 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2011年第2期359-363,共5页
CuI thin films with nano-scale grains of about 35nm were deposited via spraying method with using acetonitrile as solvent. The influence of iodine doping concentration in acetonitrile solution on the structure, topogr... CuI thin films with nano-scale grains of about 35nm were deposited via spraying method with using acetonitrile as solvent. The influence of iodine doping concentration in acetonitrile solution on the structure, topographic and optical properties of CuI thin films was investigated. X-ray diffraction results showed that CuI iodine-doped films doped CuI:I2 were in γ-phase of zinc blende structure with (111) preferential plane. Scanning electron microscopy revealed that the microstructure of CuI films depended on the relative amount of doping iodine in the solution. When the iodine doping amount in acetonitrile solution was 0.025 g, the film was uniform and compact, the optical transmittance was 75.4% in the part of visible region and the energy band gap was close to 2.96 eV. 展开更多
关键词 CuI thin film buffer layer spraying method iodine doping
在线阅读 下载PDF
One-step spraying method to construct superhydrophobic magnesium surface with extraordinary robustness and multi-functions 被引量:5
4
作者 Lingjie Li Xia Li +5 位作者 Jinlong Chen Lei Liu Jinglei Lei Nianbing Li Gao Liu Fusheng Pan 《Journal of Magnesium and Alloys》 SCIE EI CAS CSCD 2021年第2期668-675,共8页
The robust magnesium surfaces with multi-functions are highly desirable,and the simple and scalable methods to construct such surfaces are urgently indispensable.Herein,we conducted a one-step spraying method to facil... The robust magnesium surfaces with multi-functions are highly desirable,and the simple and scalable methods to construct such surfaces are urgently indispensable.Herein,we conducted a one-step spraying method to facilely fabricate the robust coating with multi-functions on magnesium alloys.The as-sprayed magnesium alloys surface is superhydrophobic with a static water contact angle(WCA)of 157.0°and a roll-off angle of 6.0°.Such surface has excellent mechanical,chemical and thermal stabilities,even undergoing various physical and chemical damages,including sand impact(10 gmin^(-1),≥20 min),water impact(2 impacts s^(-1),≥180 min),abrasion(1.00 kPa,≥25 cycles),peeling(≥2.15 kPa),high temperature(200°C,≥24 h),strong acidic/salty/basic media(p H=113)and organic-solvent immersion(ethanol and n-hexane,≥24 h),demonstrating brilliant robustness.Notably,the surface displays multi-functions of corrosion protection,anti-fouling and heat insulation,which will undoubtedly promote the much wider applications of magnesium alloys. 展开更多
关键词 Magnesium alloy spraying method SUPERHYDROPHOBICITY ROBUSTNESS Multi-functions
在线阅读 下载PDF
Temperature-dependent photoluminescence on organic inorganic metal halide perovskite CH_3NH_3Pb I_(3-)Cl_ prepared on ZnO/FTO substrates using a two-step method 被引量:4
5
作者 Shiwei Zhuang Deqian Xu +6 位作者 Jiaxin Xu Bin Wu Yuantao Zhang Xin Dong Guoxing Li Baolin Zhang Guotong Du 《Chinese Physics B》 SCIE EI CAS CSCD 2017年第1期482-487,共6页
Temperature-dependent photoluminescence characteristics of organic-inorganic halide perovskite CH3NH3Pb I3-xClx films prepared using a two-step method on ZnO/FTO substrates were investigated. Surface morphology and ab... Temperature-dependent photoluminescence characteristics of organic-inorganic halide perovskite CH3NH3Pb I3-xClx films prepared using a two-step method on ZnO/FTO substrates were investigated. Surface morphology and absorption characteristics of the films were also studied. Scanning electron microscopy revealed large crystals and substrate coverage. The orthorhombic-to-tetragonal phase transition temperature was-140 K. The films' exciton binding energy was 77.6 ± 10.9 meV and the energy of optical phonons was 38.8 ± 2.5 meV. These results suggest that perovskite CH3NH3Pb I(3-x)Clx films have excellent optoelectronic characteristics which further suggests their potential usage in perovskitebased optoelectronic devices. 展开更多
关键词 PEROVSKITE temperature-dependent photoluminescence two-step method ZNO
原文传递
Applying the Dynamic Two-Step Method to Forecast Remaining Oil Distribution of Lower Series ,Xiaermen Oilfield 被引量:2
6
作者 周红 汤传意 李增辉 《Journal of China University of Geosciences》 SCIE CSCD 2006年第1期65-70,共6页
The distribution of remaining oil is often described qualitatively. The remaining oil distributed in the whole reservoir is calculated according to the characteristics of the space distribution of the saturation of re... The distribution of remaining oil is often described qualitatively. The remaining oil distributed in the whole reservoir is calculated according to the characteristics of the space distribution of the saturation of remaining oil. Logging data are required to accomplish this. However, many such projects cannot be completed. Since the old study of remaining oil distribution could not be quantified efficiently, the "dynamic two-step method" is presented. Firstly, the water cut of every flow unit in one well at one time is calculated according to the comprehensive water cut of a single well at one time. Secondly, the remaining oil saturation of the flow unit of the well at one time is calculated based on the water cut of the flow unit at a given time. The results show that "dynamic two-step method" has characteristics of simplicity and convenience, and is especially suitable for the study of remaining oil distribution at high water-cut stage. The distribution of remaining oil presented banding and potato form, remaining oil was relatively concentrated in faultage neighborhood and imperfect well netting position, and the net thickness of the place was great. This proposal can provide an effective way to forecast remaining oil distribution and enhance oil recovery, especially applied at the high water-cut stage. 展开更多
关键词 dynamic two-step method flow unit quantitative forecast remaining oil
在线阅读 下载PDF
Preparation of ZnO/GO composite material with highly photocatalytic performance via an improved two-step method 被引量:4
7
作者 Ya-Li Chen Chun-E.Zhang +3 位作者 Chao Deng Peng Fei Ming Zhong Bi-Tao Su 《Chinese Chemical Letters》 SCIE CAS CSCD 2013年第6期518-520,共3页
ZnO/graphene oxide(ZnO/GO) composite material,in which ZnO nanoparticles were densely coated on the GO nanosheets,was successfully prepared by an improved two-step method and characterized by IR, XRD,TEM,and UV-vis ... ZnO/graphene oxide(ZnO/GO) composite material,in which ZnO nanoparticles were densely coated on the GO nanosheets,was successfully prepared by an improved two-step method and characterized by IR, XRD,TEM,and UV-vis techniques.The improved photocatalytic property of the ZnO/GO composite material,evaluated by the photocatalytic degradation of methyl orange(MO) under UV irradiation,is ascribed to the intimate contact between ZnO and GO,the enhanced adsorption of MO,the quick electron transfer from excited ZnO particles to GO sheets and the activation of MO molecules viaπ-πinteraction between MO and GO. 展开更多
关键词 ZnO/GO composite material Improved two-step method Characterization Enhanced adsorptive and photocatalytic property
原文传递
Microstructure and magnetic characteristics of nanocrystalline Ni0.5Zn0.5 ferrite synthesized by a spraying-coprecipitation method 被引量:2
8
作者 刘银 丘泰 《Chinese Physics B》 SCIE EI CAS CSCD 2007年第12期3837-3842,共6页
Nanocrystalline Ni0.5Zn0.5 ferrite with average grain sizes ranging from 10 to 100 nm is prepared by using a spraying-coprecipitation method. The results indicate that the nanocrystalline Ni0.5Zn0.5 ferrite is ferroma... Nanocrystalline Ni0.5Zn0.5 ferrite with average grain sizes ranging from 10 to 100 nm is prepared by using a spraying-coprecipitation method. The results indicate that the nanocrystalline Ni0.5Zn0.5 ferrite is ferromagnetic without the superparamagnetic phenomenon observed at room temperature. Specific saturation magnetization of nanocrystalline Nio.sZno.5 ferrite increases from 40.2 to 75.6 emu/g as grain size increases from 11 to 94nm. Coercivity of nanocrystalline Ni0.5Zn0.5 ferrite increases monotonically when d 〈 62 nm.The relationship between the coercivity and the mean grain size is well fitted into a relation Hc - d^3. A theoretically evaluated value of the critical grain size is 141nm larger than the experimental value 62nm for nanocrystalline Ni0.5Zn0.5 ferrite. The magnetic behaviour of nanocrystalline Ni0.5Zn0.5 ferrite may be explained by using the random anisotropy theory. 展开更多
关键词 nanocrystalline material Ni0.5Zn0.5 ferrite spraying-coprecipitation method
原文传递
A Two-Step Modulus-Based Matrix Splitting Iteration Method Without Auxiliary Variables for Solving Vertical Linear Complementarity Problems 被引量:1
9
作者 Hua Zheng Xiaoping Lu Seakweng Vong 《Communications on Applied Mathematics and Computation》 2024年第4期2475-2492,共18页
In this paper,a two-step iteration method is established which can be viewed as a generalization of the existing modulus-based methods for vertical linear complementarity problems given by He and Vong(Appl.Math.Lett.1... In this paper,a two-step iteration method is established which can be viewed as a generalization of the existing modulus-based methods for vertical linear complementarity problems given by He and Vong(Appl.Math.Lett.134:108344,2022).The convergence analysis of the proposed method is established,which can improve the existing results.Numerical examples show that the proposed method is efficient with the two-step technique. 展开更多
关键词 Vertical linear complementarity problem Modulus-based matrix splitting two-step method
在线阅读 下载PDF
Effect of Zn^(2+) Content on the Microstructure and Magnetic Properties of Nanocrystalline Ni_(1-x)Zn_xFe_2O_4 Ferrite by a Spraying-coprecipitation Method 被引量:1
10
作者 刘银 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2010年第3期429-431,共3页
Nanocrystalline Ni1-xZnxFe2O4 ferrites with 0≤x≤1 were successfully prepared by a spraying-coprecipitation method.The microstructure was investigated by using XRD and TEM.Magnetic properties were measured with vibra... Nanocrystalline Ni1-xZnxFe2O4 ferrites with 0≤x≤1 were successfully prepared by a spraying-coprecipitation method.The microstructure was investigated by using XRD and TEM.Magnetic properties were measured with vibrating sample magnetometer(VSM) at room temperature.The results show that the grain size of nanocrystalline Ni1-xZnxFe2O4 ferrite calcined at 600 ℃ for 1.5 h is about 30 nm.Lattice parameter and specific saturation magnetization Ms of nanocrystalline Ni1-xZnxFe2O4 ferrite increase with the Zn^2+ ions content at room temperature,and maximum Ms is 66.8 A·m^2·kg^-1 as the Zn^2+ ions content is around 0.5,and coercivity Hc of the nanocrystalline Ni1-xZnxFe2O4 ferrite decreases with Zn^2+ ions content. 展开更多
关键词 nanocrystalline material Ni-Zn ferrite spraying-coprecipitation method magnetic properties MICROSTRUCTURE
原文传递
The convergence ball and error analysis of the two-step Secant method
11
作者 LIN Rong-fei WU Qing-biao +2 位作者 CHEN Min-hong KHAN Yasir LIU Lu 《Applied Mathematics(A Journal of Chinese Universities)》 SCIE CSCD 2017年第4期397-406,共10页
Under the assumption that the nonlinear operator has Lipschitz continuous divided differences for the first order,we obtain an estimate of the radius of the convergence ball for the two-step secant method.Moreover,we ... Under the assumption that the nonlinear operator has Lipschitz continuous divided differences for the first order,we obtain an estimate of the radius of the convergence ball for the two-step secant method.Moreover,we also provide an error estimate that matches the convergence order of the two-step secant method.At last,we give an application of the proposed theorem. 展开更多
关键词 two-step secant method estimate of radius convergence ball Lipschitz continuous
在线阅读 下载PDF
Ascorbic acid-induced porous iodide layer for a high-purity two-step solution-processed tin-lead mixed perovskite photodetector 被引量:2
12
作者 Liansong Liu Fengren Cao +3 位作者 Liukang Bian Meng Wang Haoxuan Sun Liang Li 《Journal of Materials Science & Technology》 2025年第7期227-232,共6页
Tin(Sn)-lead(Pb)mixed halide perovskites have attracted widespread interest due to their wider re-sponse wavelength and lower toxicity than lead halide perovskites,Among the preparation methods,the two-step method mor... Tin(Sn)-lead(Pb)mixed halide perovskites have attracted widespread interest due to their wider re-sponse wavelength and lower toxicity than lead halide perovskites,Among the preparation methods,the two-step method more easily controls the crystallization rate and is suitable for preparing large-area per-ovskite devices.However,the residual low-conductivity iodide layer in the two-step method can affect carrier transport and device stability,and the different crystallization rates of Sn-and Pb-based per-ovskites may result in poor film quality.Therefore,Sn-Pb mixed perovskites are mainly prepared by a one-step method.Herein,a MAPb_(0.5)Sn_(0.5)I_(3)-based self-powered photodetector without a hole transport layer is fabricated by a two-step method.By adjusting the concentration of the ascorbic acid(AA)addi-tive,the final perovskite film exhibited a pure phase without residues,and the optimal device exhibited a high responsivity(0.276 A W^(-1)),large specific detectivity(2.38×10^(12) Jones),and enhanced stability.This enhancement is mainly attributed to the inhibition of Sn2+oxidation,the control of crystal growth,and the sufficient reaction between organic ammonium salts and bottom halides due to the AA-induced pore structure. 展开更多
关键词 PEROVSKITE SN-PB PHOTODETECTOR two-step solution method
原文传递
Solution of Nonlinear Integro Differential Equations by Two-Step Adomian Decomposition Method (TSAM)
13
作者 Maryam Al-Mazmumy Safa O. Almuhalbedi 《International Journal of Modern Nonlinear Theory and Application》 2016年第4期248-255,共8页
The Adomian decomposition method (ADM) can be used to solve a wide range of problems and usually gets the solution in a series form. In this paper, we propose two-step Adomian Decomposition Method (TSAM) for nonlinear... The Adomian decomposition method (ADM) can be used to solve a wide range of problems and usually gets the solution in a series form. In this paper, we propose two-step Adomian Decomposition Method (TSAM) for nonlinear integro-differential equations that will facilitate the calculations. In this modification, compared to the standard Adomian decomposition method, the size of calculations was reduced. This modification also avoids computing Adomian polynomials. Numerical results are given to show the efficiency and performance of this method. 展开更多
关键词 Adomian Decomposition method Nonlinear Volterraintegro-Differential Equations Nonlinear Fredholmintegro-Differential Equations two-step
在线阅读 下载PDF
Experimental Method for Studying the Effect of Dissolved Substances on the Evaporation Rate of Watwer Droplets Suspended in Air
14
作者 Alexander A.Fedorets Eduard E.Kolmakov +4 位作者 Anna V.Nasyrova Dmitry N.Medvedev Vyacheslav O.Mayorov Vladimir Yu.Levashov Leonid A.Dombrovsky 《Frontiers in Heat and Mass Transfer》 2025年第4期1091-1102,共12页
A new experimental method is developed to investigate the effect of dissolved substances on the evaporation rate of small water droplets suspended in the atmosphere.The laboratory setup is based on converting a genera... A new experimental method is developed to investigate the effect of dissolved substances on the evaporation rate of small water droplets suspended in the atmosphere.The laboratory setup is based on converting a generated droplet jet of complex structure into a directed flow of evaporating droplets falling in a vertical tube.Images of falling droplets captured by a high-speed camera through a window in the vertical channel wall are used to determine the sizes and velocities of individual droplets.The computational modeling of droplet motion and evaporation proved useful at all stages of the experimental work:from selecting the position of the vertical channel to processing the experimental data.It was found that even a 0.1%mass concentration of the dissolved ionic salt KCl has a considerable effect on decreasing the evaporation rate of the droplets.In contrast,a typical fungicide with a mass concentration of 2.5%has only a slight impact on the evaporation rate.The laboratory results enabled the authors to refine the evaporation model of water droplets to account for the presence of dissolved substances.Modified models of this type are expected to be useful in controling crop spraying and also in other potential applications. 展开更多
关键词 Droplets EVAPORATION crop spraying experimental method physical model
在线阅读 下载PDF
复杂地下环境中挂轨式智能灭火机器人喷头射流轨迹研究
15
作者 邹新 《自动化技术与应用》 2026年第2期104-108,共5页
在复杂地下环境中,由于空间狭小、通风条件差、障碍物众多以及烟雾弥漫等不利因素,喷头射流轨迹的设定若不合理,将导致灭火介质无法准确覆盖火源,从而严重影响灭火效率与安全性。为此,提出复杂地下环境中挂轨式智能灭火机器人喷头射流... 在复杂地下环境中,由于空间狭小、通风条件差、障碍物众多以及烟雾弥漫等不利因素,喷头射流轨迹的设定若不合理,将导致灭火介质无法准确覆盖火源,从而严重影响灭火效率与安全性。为此,提出复杂地下环境中挂轨式智能灭火机器人喷头射流轨迹研究。基于所设计的智能灭火机器人喷头结构,综合考虑空气阻力、重力、风力等多因素影响,构建了射流轨迹的三维运动微分方程;采用数值分析方法——龙格库塔法对该非线性微分方程组进行求解,以实现对射流轨迹的精确预测,从而辅助灭火机器人智能、精准地定位火源位置。实验结果表明,在20°~50°俯仰角范围内,射流轨迹近似直线;当俯仰角增大至70°~90°时,轨迹受重力与阻力影响显著,转变为明显的抛物线形态。同时,随着风速从1 m/s增加至15 m/s,射流轨迹由基本直线状态逐渐发生显著横向漂移,弯曲程度加剧。为挂轨式智能灭火机器人的喷头控制与轨迹规划提供了理论依据与方法支持,有助于实现高效、智能的灭火目标。 展开更多
关键词 复杂地下环境 挂轨式智能灭火机器人 喷头设计 龙格库塔法 射流轨迹分析方法 受力分析
在线阅读 下载PDF
Arrhenius relationship and two-step scheme in AF hyperdynamics simulation of diffusion of Mg/Zn interface 被引量:1
16
作者 吴永全 陆秀明 沈通 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2013年第2期508-516,共9页
The accelerating factor (AF) method is a simple and appropriate way to investigate the atomic long-time deep diffusion at solid-solid interface. In the framework of AF hyperdynamics (HD) simulation, the relationsh... The accelerating factor (AF) method is a simple and appropriate way to investigate the atomic long-time deep diffusion at solid-solid interface. In the framework of AF hyperdynamics (HD) simulation, the relationship between the diffusion coefficient along the direction of z-axis which is normal to the Mg/Zn interface and temperature was investigated, and the AF's impact on the diffusion constant (D0) and activation energy (Q^*) was studied. Then, two steps were taken to simulate the atomic diffusion process and the formation of new phases: one for acceleration and the other for equilibration. The results show that: the Arrhenius equation works well for the description of Dz with different accelerating factors; the AF has no effect on the diffusion constant Do in the case of no phase transition; and the relationship between Q* and Q conforms to Q^*=Q/A. Then, the new Arrhenius equation for AFHD is successfully constructed as Dz=Doexp[-Q/(ART)]. Meanwhile, the authentic equilibrium conformations at any dynamic moment can only be reproduced by the equilibration simulation of the HD-simulated configurations. Key words: accelerating factor method; Arrhenius equation; two-steps scheme; Mg/Zn interface; hyperdynamic simulation 展开更多
关键词 accelerating factor method Arrhenius equation two-steps scheme Mg/Zn interface hyperdynamic simulation
在线阅读 下载PDF
纳米二氧化钛基超疏水表面的构建及其应用
17
作者 赵强 江阳 +2 位作者 刘正江 董奇 张宏 《毛纺科技》 北大核心 2026年第1期135-142,共8页
为克服传统超疏水材料机械稳定性差、环境适应性弱及含氟依赖性强等局限,综述纳米TiO2基超疏水表面的研究进展,系统比较溶胶-凝胶法、沉积法、喷涂法等构建策略的优劣;阐明表面粗糙度调控、低表面能修饰及光催化活性对性能的影响机制;... 为克服传统超疏水材料机械稳定性差、环境适应性弱及含氟依赖性强等局限,综述纳米TiO2基超疏水表面的研究进展,系统比较溶胶-凝胶法、沉积法、喷涂法等构建策略的优劣;阐明表面粗糙度调控、低表面能修饰及光催化活性对性能的影响机制;重点评述其在自清洁、油水分离、防腐等领域的应用优势;指出当前存在光催化活性导致修饰层降解、纳米颗粒易团聚及工艺依赖含氟试剂/高能耗等问题。未来需开发动态键合自修复结构、无氟改性剂及低温组装技术,以推动工程化应用。 展开更多
关键词 二氧化钛 超疏水 接触角 表面粗糙度 溶胶-凝胶法 沉积法 喷涂法
在线阅读 下载PDF
氯离子浓度对微损T91钢腐蚀性能的影响
18
作者 胡明磊 陈乐 +3 位作者 胡斌 罗强 文杰 魏光强 《包钢科技》 2026年第1期55-59,共5页
文章研究了不同氯离子(Cl^(-))浓度对经压入法处理的T91钢在中性盐雾环境中腐蚀行为的影响。采用10%和15%两种浓度的NaCl溶液,在标准中性盐雾试验条件下对压入试样进行了48~288 h的腐蚀试验。通过分析腐蚀失重、腐蚀形貌及腐蚀产物,发现... 文章研究了不同氯离子(Cl^(-))浓度对经压入法处理的T91钢在中性盐雾环境中腐蚀行为的影响。采用10%和15%两种浓度的NaCl溶液,在标准中性盐雾试验条件下对压入试样进行了48~288 h的腐蚀试验。通过分析腐蚀失重、腐蚀形貌及腐蚀产物,发现15%NaCl环境下的试样腐蚀失重高于10%NaCl环境,且两者差距随腐蚀时间延长而增大,在288 h时达到最大值0.0085 g。这证明高Cl^(-)浓度环境对T91钢的腐蚀作用更强,且随时间累积效应明显。扫描电子显微镜观察结果显示,压痕处更易腐蚀,且Cl^(-)浓度越大腐蚀越严重,表明压入形成的应力集中(位错、微裂纹等)显著降低了该区域的耐蚀性,使其成为优先发生腐蚀的敏感区域。 展开更多
关键词 T91钢 压入法 盐雾试验 腐蚀失重
在线阅读 下载PDF
基于改进粒子群算法的冗余机器人喷涂轨迹优化
19
作者 钟艺鹏 沙建军 +3 位作者 张一飞 杨汶龙 殷婷 马祥龙 《浙江大学学报(工学版)》 北大核心 2026年第2期269-278,共10页
针对大型部件自动喷涂过程中冗余机器人耦合度低造成的轨迹不平滑、关节冲击问题,提出新的喷涂轨迹优化方法.建立冗余机器人模型,结合分站式定位逆解和阻尼最小二乘法求逆运动学解.采用改进粒子群算法优化冗余机器人外部轴轨迹,引入自... 针对大型部件自动喷涂过程中冗余机器人耦合度低造成的轨迹不平滑、关节冲击问题,提出新的喷涂轨迹优化方法.建立冗余机器人模型,结合分站式定位逆解和阻尼最小二乘法求逆运动学解.采用改进粒子群算法优化冗余机器人外部轴轨迹,引入自适应惯性权重和非线性学习因子,增强算法搜索能力,提高算法的求解精度与寻优速度.仿真实验表明,与原轨迹、GA-PSO算法优化后的轨迹和改进模拟退火遗传算法优化后的轨迹相比,采用改进粒子群算法优化后,机器人在直线喷涂任务中整体能量损耗分别降低了35.4%、1.3%和2.8%,外部轴运动幅度分别降低了32.6%、0.4%和2.3%;在曲线喷涂任务中整体能量损耗分别降低了26.8%、2.8%和7.3%,外部轴运动幅度分别降低了58.7%、17.8%和21.0%. 展开更多
关键词 冗余机器人 机器人喷涂 轨迹优化 阻尼最小二乘法 粒子群算法
在线阅读 下载PDF
基于欧拉-拉格朗日法的空气喷涂非线性工艺调控与参数优化
20
作者 万俊豪 曾勇 +1 位作者 祝欣怡 向琼瑞 《制造业自动化》 2026年第1期113-126,共14页
为提升机器人喷涂自动化水平及涂膜质量,本研究通过构建空气喷涂成膜过程的高精度数值模型,系统揭示了雾化特性与成膜机理的耦合作用规律,并提出工艺参数优化策略。基于欧拉-拉格朗日方法,结合KHRT液滴破碎模型与壁面捕捉模型,建立了涵... 为提升机器人喷涂自动化水平及涂膜质量,本研究通过构建空气喷涂成膜过程的高精度数值模型,系统揭示了雾化特性与成膜机理的耦合作用规律,并提出工艺参数优化策略。基于欧拉-拉格朗日方法,结合KHRT液滴破碎模型与壁面捕捉模型,建立了涵盖离散相运动、连续相湍流及气液两相耦合作用的涂料沉积过程数值模型。通过网格无关性验证确保计算精度,并采用实验标定的雾化锥角与喷射初速度作为初始参数,综合分析喷涂高度、初速度及雾化锥角对涂膜厚度分布、均匀性及涂料效率的影响机制。研究发现:粒子撞击速度是影响雾化效果与成膜质量的关键中间变量,其值随喷涂高度增加呈线性下降,导致有效涂膜范围扩大,均匀性显著提升,但涂料逃逸率增加。喷射初速度存在最优区间,过高时液滴逃逸加剧,过低则导致雾化不充分,需权衡均匀性与喷涂效率。雾化锥角增大显著降低喷涂效率,且引发粒径分布不均,但过小锥角因局部动能集中导致均匀性劣化,需通过锥角优化平衡覆盖范围与成膜质量。实验验证表明了模型可靠性。本研究首次将雾化过程与成膜特性纳入统一分析框架,阐明工艺参数对涂膜质量的非线性调控机制,研究结果对喷涂工艺开发具有重要工程指导价值。 展开更多
关键词 空气喷涂 成膜特性 雾化特性 欧拉-拉格朗日法 喷涂工艺参数
在线阅读 下载PDF
上一页 1 2 67 下一页 到第
使用帮助 返回顶部