A diverse range of light and waves,spanning from near-infrared to ultraviolet,alongside ultrasound,have proven effective in propelling nanomotors.This review encapsulates the advancements in nanomotor research propell...A diverse range of light and waves,spanning from near-infrared to ultraviolet,alongside ultrasound,have proven effective in propelling nanomotors.This review encapsulates the advancements in nanomotor research propelled by waves of varying frequencies.It delves into the driving mechanisms and control methodologies of different nanomotor types,emphasizing the role of frequency.Nanomotors can be classified based on the frequency of the driving wave,encompassing ultraviolet light-driven,visible light-driven,near-infrared-driven,and ultrasounddriven variants.Each category corresponds to distinct propulsion mechanisms,including momentum transfer,photothermal effects,self-electrophoresis,and acoustic radiation force.Notably,visible light and near-infrared radiation predominantly propel momentum transfer nanomotors,while photothermal nanomotors are chiefly active within the infrared spectrum.Ultraviolet light drives most self-electrophoretic nanomotors,while ultrasound-driven nanomotors respond to acoustic radiation force.Furthermore,precise control over nanomotor speed and direction is achievable by adjusting the frequency of incident waves within a narrow range,modulating wave absorption rates.Lastly,this paper explores microwave nanomotors,an area yet to be reported,shedding light on potential driving mechanisms.展开更多
In order to eliminate the meshing interference between the flexspline and circular spline after the taper deformation of the flexspline,the radial deformation difference method,major and minor axis fitting method,and ...In order to eliminate the meshing interference between the flexspline and circular spline after the taper deformation of the flexspline,the radial deformation difference method,major and minor axis fitting method,and ellipse fitting method are used to modify the tooth thickness of the flexspline and analyze the performance indexes such as the assembly stress,transmission error,and fatigue life.Firstly,the conjugate tooth profile is solved based on the quadruple-circular-arc tooth profile and modified kinematic method.Then,based on the finite element radial deformation of the flexspline,the principle and characteristics of three modification methods are analyzed,and the modification amount of each section of the flexspline tooth is calculated.Finally,the influence of the three modification methods on the performance of the harmonic drive is compared.The results show that the radial deformation difference method can initially determine the modification amount.The minimum static assembly stress is 406.22 MPa by the major and minor axis fitting method.The ellipse fitting method has the best dynamic performance,small transmission error fluctuation,a peak-to-peak value of 3.060",and a maximum fatigue life of 10^(7.558)cycles.展开更多
Understanding the scale-dependent dynamics of ecosystem services(ESs)and their socio-ecological drivers is essential for sustainable development.While many studies rely on static or single-scale approaches,this resear...Understanding the scale-dependent dynamics of ecosystem services(ESs)and their socio-ecological drivers is essential for sustainable development.While many studies rely on static or single-scale approaches,this research employs an integrated multi-temporal(2000–2020)and multi-scale(grid,county,and landscape levels)framework to investigate China’s Central Asian frontier,a representative dryland region.We quantified six ESs:habitat quality(HQ),net primary productivity(NPP),carbon sequestration(CS),water yield(WY),soil conservation(SC),and grain production(GP).Furthermore,we explored their interrelationships and identified the drivers influencing these services across different spatial scales.Our results revealed divergent ES trajectories:the declining HQ(−0.03 a^(−1)),NPP(−0.43 t km^(−2)a^(−1)),and SC(−3.41 t ha a^(−1))contrasted with rising WY(+2.33 mm a^(−1)),GP(+0.06 t km^(−2)a^(−1)),and CS(+0.02 t km^(−2)a^(−1)).The ES relationships were predominantly synergistic,while HQ–WY exhibited a trade-off(grid:−0.03;county:−0.02;landscape:−0.03)at temporal dimension but a synergistic relationship(grid:0.45;county:0.92;landscape:0.92)at spatial dimension.As spatial scale increased,SC–CS shifted from synergy(grid:0.001)to trade-off(county:−0.01;landscape:−0.005)in the temporal dimension,while all trade-off relationships in the spatial dimension were transformed into synergies.Key drivers of ES relationships varied with spatial scale:fraction vegetation coverage(FVC)and leaf area index(LAI)at the grid scale,annual precipitation(MAP)and soil moisture(SMA)at the county scale,and population density(POP),gross domestic product(GDP),and silt content(Silt)at the landscape scale.Based on the multi-scale findings,the study divides northern Xinjiang into Grain Priority Region,Ecological Priority Region,and Desert Containment Region,and proposes tailored management recommendations,offering a flexible framework for balancing ecological and socioeconomic needs.展开更多
As a critical ecological barrier in China,the Qinling Mountains see their ecological functions significantly impaired by frequent shallow landslides.However,existing research on the distribution characteristics and dr...As a critical ecological barrier in China,the Qinling Mountains see their ecological functions significantly impaired by frequent shallow landslides.However,existing research on the distribution characteristics and driving mechanisms of such landslides remains relatively limited.To address this knowledge gap,the present study integrated data analysis,field investigations,and remote sensing interpretation to construct a landslide database for the core area of the Qinling Mountains,and systematically analyzed the spatial patterns,development characteristics,and environmental driving factors of shallow landslides.The results reveal that shallow landslides are predominantly small-to-medium in scale,concentrated in regions with an altitude of 800–1000 m and a slope gradient of approximately 30°,with a distinct tendency to develop on sunny(southfacing)slopes.The occurrence frequency of these landslides exhibits a significant positive correlation with the soil moisture content of the weathered layer and the degree of groundwater enrichment in the study area.Specifically,these landslides are mainly developed in bedrock fissure water zones and karst fissure water zones with favorable water-bearing capacity,indicating that rainfall and surface hydrological processes are the key triggering factors for shallow landslides.Notably,vegetation exerts a mediating role in the"vegetation-hydrology-landslide"system:shallow landslides occur most frequently in areas with artificial or shrub-grass vegetation,peaking at a moderate coverage of 50%–60%.This peak suggests that vegetation within this range is ineffective at regulating soil moisture,while the interaction between specific vegetation types and hydrological enrichment further exacerbates landslide risk.By prioritizing the weights of vegetation and hydrological factors,we enhanced the information quantity model,which significantly improved its performance and increased the AUC value to 0.83.These findings confirm the pivotal roles of vegetation and hydrological factors,thereby providing a robust scientific basis for targeted landslide prevention and control in this region.展开更多
This study develops a contact performance-driven method for skiving face gear drives using a single cutter,eliminating the traditional need for separate cutters to reduce production costs and time.First,the mathematic...This study develops a contact performance-driven method for skiving face gear drives using a single cutter,eliminating the traditional need for separate cutters to reduce production costs and time.First,the mathematical models of the tooth flanks for the face gear drives are established based on the gear skiving processes.Then,load tooth contact analysis(LTCA)model is established to calculate the contact performance data.Next,a two-stage optimization model is employed to determine the optimal parameters of the cutting edge with improved contact performances.The effectiveness of this method is validated through simulations and rolling tests.Compared with the traditional method,the proposed method can machine both the face gear and its mating pinion with a single cutter.Simulation results show that the proposed method avoids tooth surface edge contact,with the maximum tooth surface contact stress reduced by 31.7%,the contact ratio decreases by 21.5%,and the transmission error increases by 22.3%.Rolling tests verify the consistency of tooth surface contact patterns between simulations and experiments.The proposed method provides a reference for the cutting edge design of skiving cutters for face gear pairs.展开更多
To address the severe challenges of PM_(2.5) and ozone co-control during the"14^(th) Five-Year Plan"period and to enhance the precision and intelligence level of air environment governance,it is imperative t...To address the severe challenges of PM_(2.5) and ozone co-control during the"14^(th) Five-Year Plan"period and to enhance the precision and intelligence level of air environment governance,it is imperative to build an efficient comprehensive management platform for regional air quality.In this paper,the specific practice in Zibo City,Shandong Province is as an example to systematically analyze the top-level design,technical implementation,and innovative application of a comprehensive management platform for regional air quality integrating"perception monitoring,data fusion,research judgment of early warnings,analysis of sources,collaborative dispatching,and evaluation assessment".Through the construction of an"sky-air-ground"integrated three-dimensional monitoring network,the platform integrates multi-source heterogeneous environmental data,and employs big data,cloud computing,artificial intelligence,CALPUFF/CMAQ,and other numerical model technologies to achieve comprehensive perception,precise prediction,intelligent source tracing,and closed-loop management of air pollution.The platform innovatively establishes a full-process closed-loop management mechanism of"data-early warning-disposition-evaluation",and achieves a fundamental transformation from passive response to active anticipation and from experience-based judgment to data driving in environmental supervision.The application results show that this platform significantly improves the scientific decision-making ability and collaborative execution efficiency of air pollution governance in Zibo City,providing a replicable and scalable comprehensive solution for similar industrial cities to achieve the continuous improvement of air quality.展开更多
Applications are limited at present because the currently available ultrasonic motors (USMs) do not provide suffi-ciently high torque and power. The conventional travelling-wave USM needs the bearing to support, which...Applications are limited at present because the currently available ultrasonic motors (USMs) do not provide suffi-ciently high torque and power. The conventional travelling-wave USM needs the bearing to support, which required lubricant. To solve the above problem, a bearingless travelling-wave USM is designed. First, a novel structure of the two-sided USM consisting of a two-sided teeth stator and two disk-type rotors is designed. And the excitation principle of the two-sided travelling-wave USM is analyzed. Then, using ANSYS software, we set up the model of the stator to predict the excitation frequency and modal response of the stator. The shape of the vibration mode was obtained. Last, the load characteristics of the USM are measured using ex-perimental method. The maximum stall torque and the no-load speed were obtained. The results showed that the characteristics of the two-sided USM are better than those of the conventional one-sided USM.展开更多
In this study, forced nonlinear vibration of a circular micro-plate under two-sided electrostatic, two-sided Casimir and external harmonic forces is investigated analytically. For this purpose, at first, von Karman pl...In this study, forced nonlinear vibration of a circular micro-plate under two-sided electrostatic, two-sided Casimir and external harmonic forces is investigated analytically. For this purpose, at first, von Karman plate theory including geometrical nonlinearity is used to obtain the deflection of the micro-plate. Galerkin decomposition method is then employed, and nonlinear ordinary differential equations (ODEs) of motion are determined. A harmonic balance method (HBM) is applied to equations and analytical relation for nonlineaT frequency response (F-R) curves are derived for two categories (including and neglecting Casimir force) separately. The analytical results for three cases:(1) semi-linear vibration;(2) weakly nonlinear vibration;(3) highly non linear vibration, are validated by comparing with the numerical solutio ns. After validation, the effects of the voltage and Casimir force on the natural frequency of two-sided capacitor system are investigated. It is shown that by assuming Casimir force in small gap distances, reduction of the natural frequency is considerable. The influences of the applied voltage, damping, micro-plate thickness and Casimir force on the frequency response curves have been presented too. The results of this study can be useful for modeling circular parallel-plates in nano /microelectromechanical transducers such as microphones and pressure sensors.展开更多
Due to the NP-hardness of the two-sided assembly line balancing （TALB） problem, multiple constraints existing in real applications are less studied, especially when one task is involved with several constraints. In ...Due to the NP-hardness of the two-sided assembly line balancing （TALB） problem, multiple constraints existing in real applications are less studied, especially when one task is involved with several constraints. In this paper, an effective hybrid algorithm is proposed to address the TALB problem with multiple constraints （TALB-MC）. Considering the discrete attribute of TALB-MC and the continuous attribute of the standard teaching-learning-based optimization （TLBO） algorithm, the random-keys method is hired in task permutation representation, for the purpose of bridging the gap between them. Subsequently, a special mechanism for handling multiple constraints is developed. In the mechanism, the directions constraint of each task is ensured by the direction check and adjustment. The zoning constraints and the synchronism constraints are satisfied by teasing out the hidden correlations among constraints. The positional constraint is allowed to be violated to some extent in decoding and punished in cost fimction. Finally, with the TLBO seeking for the global optimum, the variable neighborhood search （VNS） is further hybridized to extend the local search space. The experimental results show that the proposed hybrid algorithm outperforms the late acceptance hill-climbing algorithm （LAHC） for TALB-MC in most cases, especially for large-size problems with multiple constraints, and demonstrates well balance between the exploration and the exploitation. This research proposes an effective and efficient algorithm for solving TALB-MC problem by hybridizing the TLBO and VNS.展开更多
A two-sided assembly line is typically found in plants producing large-sized products. Its advantages over a one-sided line and the difficulties faced in two-sided line balancing problems were discussed. A mathematica...A two-sided assembly line is typically found in plants producing large-sized products. Its advantages over a one-sided line and the difficulties faced in two-sided line balancing problems were discussed. A mathematical model for two-ALB problem was suggested. A modification of the “ranked positional weight” method, namely two-ALB RPW for two-ALB problems was developed. Experiments were carried out to verify the performance of the proposed method and the results show that it is effective in solving two-sided assembly line balancing problems.展开更多
The size and shape of the effective test area are crucial to consider when short-crested waves are created by segmented wavemakers. The range of the effective test area of short-crested waves simulated by two-sided se...The size and shape of the effective test area are crucial to consider when short-crested waves are created by segmented wavemakers. The range of the effective test area of short-crested waves simulated by two-sided segmented wavemakers is analyzed in this paper. The experimental investigation on the wave field distribution of short-crested waves generated by two-sided segmented wavemakers is conducted by using an array of wave gauges. Wave spectra and directional spreading function are analyzed and the results show that when the main direction is at a certain angle with the normal line of wave generators, the wave field of 3D short-crested waves generated by two-sided segmented wavemakers has good spatial uniformity within the model test area. The effective test area can provide good wave environments for seakeeping model tests of various ocean engineering structures in the deep ocean engineering basin.展开更多
In this paper, we consider the two-sided first exit problem for jump diffusion processes having jumps with rational Laplace transforms. We investigate the probabilistic property of conditional memorylessness, and driv...In this paper, we consider the two-sided first exit problem for jump diffusion processes having jumps with rational Laplace transforms. We investigate the probabilistic property of conditional memorylessness, and drive the joint distribution of the first exit time from an interval and the overshoot over the boundary at the exit time.展开更多
In previous research on two-sided matching(TSM)decision,agents’preferences were often given in the form of exact values of ordinal numbers and linguistic phrase term sets.Nowdays,the matching agent cannot perform the...In previous research on two-sided matching(TSM)decision,agents’preferences were often given in the form of exact values of ordinal numbers and linguistic phrase term sets.Nowdays,the matching agent cannot perform the exact evaluation in the TSM situations due to the great fuzziness of human thought and the complexity of reality.Probability hesitant fuzzy sets,however,have grown in popularity due to their advantages in communicating complex information.Therefore,this paper develops a TSM decision-making approach with multi-attribute probability hesitant fuzzy sets and unknown attribute weight information.The agent attribute weight vector should be obtained by using the maximum deviation method and Hamming distance.The probabilistic hesitancy fuzzy information matrix of each agent is then arranged to determine the comprehensive evaluation of two matching agent sets.The agent satisfaction degree is calculated using the technique for order preference by similarity to ideal solution(TOPSIS).Additionally,the multi-object programming technique is used to establish a TSM method with the objective of maximizing the agent satisfaction of two-sided agents,and the matching schemes are then established by solving the built model.The study concludes by providing a real-world supply-demand scenario to illustrate the effectiveness of the proposed method.The proposed method is more flexible than prior research since it expresses evaluation information using probability hesitating fuzzy sets and can be used in scenarios when attribute weight information is unclear.展开更多
In this paper, existence and uniqueness of solution to two-point boundary value for two-sided fractional differential equations involving Caputo fractional derivative is discussed, by means of the Min-Max Theorem.
In this paper,a stable two-sided matching(TSM)method considering the matching intention of agents under a hesitant fuzzy environment is proposed.The method uses a hesitant fuzzy element(HFE)as its basis.First,the HFE ...In this paper,a stable two-sided matching(TSM)method considering the matching intention of agents under a hesitant fuzzy environment is proposed.The method uses a hesitant fuzzy element(HFE)as its basis.First,the HFE preference matrix is transformed into the normalized HFE preference matrix.On this basis,the distance and the projection of the normalized HFEs on positive and negative ideal solutions are calculated.Then,the normalized HFEs are transformed into agent satisfactions.Considering the stable matching constraints,a multiobjective programming model with the objective of maximizing the satisfactions of two-sided agents is constructed.Based on the agent satisfaction matrix,the matching intention matrix of two-sided agents is built.According to the agent satisfaction matrix and matching intention matrix,the comprehensive satisfaction matrix is set up.Furthermore,the multiobjective programming model based on satisfactions is transformed into a multiobjective programming model based on comprehensive satisfactions.Using the G-S algorithm,the multiobjective programming model based on comprehensive satisfactions is solved,and then the best TSM scheme is obtained.Finally,a terminal distribution example is used to verify the feasibility and effectiveness of the proposed method.展开更多
In this paper, we study the logarithmic Sobolev inequalities for two-sided birth-death processes. An estimate of the logarithmic Sobolev constant α for a two-sided birth-death process is obtained by the Hardy-type in...In this paper, we study the logarithmic Sobolev inequalities for two-sided birth-death processes. An estimate of the logarithmic Sobolev constant α for a two-sided birth-death process is obtained by the Hardy-type inequality and a criteria for a is also presented.展开更多
The composition and production technology of the type of hot-rolled steel plate used in two-sided enameling were briefly described. The microstructure and mechanical properties before and after enameling were contrast...The composition and production technology of the type of hot-rolled steel plate used in two-sided enameling were briefly described. The microstructure and mechanical properties before and after enameling were contrastively investigated,and the precipitates in the samples were analyzed using transmission electron microscope and energy dispersive spectrometer. The results show the ferrite grain size of the steel plate after high-temperature enamel firing to be fine,with a large number of TiC and Ti;C;S;precipitates dispersed throughout the ferrite matrix. After two rounds of enamel firing at a temperature range of 800-890 ℃,its yield strength can still reach342 MPa. The results of a hydrogen permeation test show that the hydrogen storage properties of the steel plate are much better than those of ordinary structural carbon steel. A better bubble structure in the enamel layer can be obtained by this steel plate,with no fish-scale defects on the enameled steel-plate surface.展开更多
This article describes some dynamic aspects on dynastic utility incorporating two-sided altruism with an OLG setting. The special case is analyzed where the weights of two-sided altruism are dynamically inconsistent. ...This article describes some dynamic aspects on dynastic utility incorporating two-sided altruism with an OLG setting. The special case is analyzed where the weights of two-sided altruism are dynamically inconsistent. The Bellman equation for two-sided altruism proves to be reduced to one-sided dynamic problem, but the effective discount factor is different only in the current generation. It is shown that a contraction mapping result of value function cannot be achieved in general, and that there can locally exist an infinite number of self-consistent policy functions of the class C＂ with distinct steady states （indeterminacy of self-consistent, differentiable policy functions）.展开更多
Model predictive control(MPC)has been deemed as an attractive control method in motor drives by virtue of its simple structure,convenient multi-objective optimization,and satisfactory dynamic performance.However,the s...Model predictive control(MPC)has been deemed as an attractive control method in motor drives by virtue of its simple structure,convenient multi-objective optimization,and satisfactory dynamic performance.However,the strong reliance on mathematical models seriously restrains its practical application.Therefore,improving the robustness of MPC has attained significant attentions in the last two decades,followed by which,model-free predictive control(MFPC)comes into existence.This article aims to reveal the current state of MFPC strategies for motor drives and give the categorization from the perspective of implementation.Based on this review,the principles of the reported MFPC strategies are introduced in detail,as well as the challenges encountered in technology realization.In addition,some of typical and important concepts are experimentally validated via case studies to evaluate the performance and highlight their features.Finally,the future trends of MFPC are discussed based on the current state and reported developments.展开更多
基金supported by the National Key Research and Development Program of China(2021YFA1401103)the National Natural Science Foundation of China(52473109,52073071)+3 种基金China Scholarship Council(CSC)(202306790056)Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX22_2301)111 Project(B23008)the Innovative Leading Talent Team supported by 2022Wuxi Taihu Talent Program(1096010241230120)。
文摘A diverse range of light and waves,spanning from near-infrared to ultraviolet,alongside ultrasound,have proven effective in propelling nanomotors.This review encapsulates the advancements in nanomotor research propelled by waves of varying frequencies.It delves into the driving mechanisms and control methodologies of different nanomotor types,emphasizing the role of frequency.Nanomotors can be classified based on the frequency of the driving wave,encompassing ultraviolet light-driven,visible light-driven,near-infrared-driven,and ultrasounddriven variants.Each category corresponds to distinct propulsion mechanisms,including momentum transfer,photothermal effects,self-electrophoresis,and acoustic radiation force.Notably,visible light and near-infrared radiation predominantly propel momentum transfer nanomotors,while photothermal nanomotors are chiefly active within the infrared spectrum.Ultraviolet light drives most self-electrophoretic nanomotors,while ultrasound-driven nanomotors respond to acoustic radiation force.Furthermore,precise control over nanomotor speed and direction is achievable by adjusting the frequency of incident waves within a narrow range,modulating wave absorption rates.Lastly,this paper explores microwave nanomotors,an area yet to be reported,shedding light on potential driving mechanisms.
文摘In order to eliminate the meshing interference between the flexspline and circular spline after the taper deformation of the flexspline,the radial deformation difference method,major and minor axis fitting method,and ellipse fitting method are used to modify the tooth thickness of the flexspline and analyze the performance indexes such as the assembly stress,transmission error,and fatigue life.Firstly,the conjugate tooth profile is solved based on the quadruple-circular-arc tooth profile and modified kinematic method.Then,based on the finite element radial deformation of the flexspline,the principle and characteristics of three modification methods are analyzed,and the modification amount of each section of the flexspline tooth is calculated.Finally,the influence of the three modification methods on the performance of the harmonic drive is compared.The results show that the radial deformation difference method can initially determine the modification amount.The minimum static assembly stress is 406.22 MPa by the major and minor axis fitting method.The ellipse fitting method has the best dynamic performance,small transmission error fluctuation,a peak-to-peak value of 3.060",and a maximum fatigue life of 10^(7.558)cycles.
基金National Natural Science Foundation of China,No.42377302Ministry of Science and Technology of the People’s Republic of China,No.2022XJKK0904State Key Laboratory of Soil and Sustainable Agriculture,No.SKLSSA25K03。
文摘Understanding the scale-dependent dynamics of ecosystem services(ESs)and their socio-ecological drivers is essential for sustainable development.While many studies rely on static or single-scale approaches,this research employs an integrated multi-temporal(2000–2020)and multi-scale(grid,county,and landscape levels)framework to investigate China’s Central Asian frontier,a representative dryland region.We quantified six ESs:habitat quality(HQ),net primary productivity(NPP),carbon sequestration(CS),water yield(WY),soil conservation(SC),and grain production(GP).Furthermore,we explored their interrelationships and identified the drivers influencing these services across different spatial scales.Our results revealed divergent ES trajectories:the declining HQ(−0.03 a^(−1)),NPP(−0.43 t km^(−2)a^(−1)),and SC(−3.41 t ha a^(−1))contrasted with rising WY(+2.33 mm a^(−1)),GP(+0.06 t km^(−2)a^(−1)),and CS(+0.02 t km^(−2)a^(−1)).The ES relationships were predominantly synergistic,while HQ–WY exhibited a trade-off(grid:−0.03;county:−0.02;landscape:−0.03)at temporal dimension but a synergistic relationship(grid:0.45;county:0.92;landscape:0.92)at spatial dimension.As spatial scale increased,SC–CS shifted from synergy(grid:0.001)to trade-off(county:−0.01;landscape:−0.005)in the temporal dimension,while all trade-off relationships in the spatial dimension were transformed into synergies.Key drivers of ES relationships varied with spatial scale:fraction vegetation coverage(FVC)and leaf area index(LAI)at the grid scale,annual precipitation(MAP)and soil moisture(SMA)at the county scale,and population density(POP),gross domestic product(GDP),and silt content(Silt)at the landscape scale.Based on the multi-scale findings,the study divides northern Xinjiang into Grain Priority Region,Ecological Priority Region,and Desert Containment Region,and proposes tailored management recommendations,offering a flexible framework for balancing ecological and socioeconomic needs.
基金supported by the National Key R&D Program of China(No.2024YFF1306502)three Special Programs of the National Natural Science Foundation of China(Nos.42341101,42442045,42307220)the Basic Scientific Research Business Funds of Central Universities(Nos.300102263401,300102265501,300102264103)。
文摘As a critical ecological barrier in China,the Qinling Mountains see their ecological functions significantly impaired by frequent shallow landslides.However,existing research on the distribution characteristics and driving mechanisms of such landslides remains relatively limited.To address this knowledge gap,the present study integrated data analysis,field investigations,and remote sensing interpretation to construct a landslide database for the core area of the Qinling Mountains,and systematically analyzed the spatial patterns,development characteristics,and environmental driving factors of shallow landslides.The results reveal that shallow landslides are predominantly small-to-medium in scale,concentrated in regions with an altitude of 800–1000 m and a slope gradient of approximately 30°,with a distinct tendency to develop on sunny(southfacing)slopes.The occurrence frequency of these landslides exhibits a significant positive correlation with the soil moisture content of the weathered layer and the degree of groundwater enrichment in the study area.Specifically,these landslides are mainly developed in bedrock fissure water zones and karst fissure water zones with favorable water-bearing capacity,indicating that rainfall and surface hydrological processes are the key triggering factors for shallow landslides.Notably,vegetation exerts a mediating role in the"vegetation-hydrology-landslide"system:shallow landslides occur most frequently in areas with artificial or shrub-grass vegetation,peaking at a moderate coverage of 50%–60%.This peak suggests that vegetation within this range is ineffective at regulating soil moisture,while the interaction between specific vegetation types and hydrological enrichment further exacerbates landslide risk.By prioritizing the weights of vegetation and hydrological factors,we enhanced the information quantity model,which significantly improved its performance and increased the AUC value to 0.83.These findings confirm the pivotal roles of vegetation and hydrological factors,thereby providing a robust scientific basis for targeted landslide prevention and control in this region.
基金Project(2024YFB3410402)supported by the National Key R&D Program of ChinaProject(52075558)supported by the National Natural Science Foundation of China+2 种基金Project(2021RC3012)supported by the Science and Technology Innovation Program of Hunan Province,ChinaProject(2023CXQD050)supported by the Central South University Innovation-Driven Research Program,ChinaProject(CX20230255)supported by the Fundamental Research Funds for the Central Universities,China。
文摘This study develops a contact performance-driven method for skiving face gear drives using a single cutter,eliminating the traditional need for separate cutters to reduce production costs and time.First,the mathematical models of the tooth flanks for the face gear drives are established based on the gear skiving processes.Then,load tooth contact analysis(LTCA)model is established to calculate the contact performance data.Next,a two-stage optimization model is employed to determine the optimal parameters of the cutting edge with improved contact performances.The effectiveness of this method is validated through simulations and rolling tests.Compared with the traditional method,the proposed method can machine both the face gear and its mating pinion with a single cutter.Simulation results show that the proposed method avoids tooth surface edge contact,with the maximum tooth surface contact stress reduced by 31.7%,the contact ratio decreases by 21.5%,and the transmission error increases by 22.3%.Rolling tests verify the consistency of tooth surface contact patterns between simulations and experiments.The proposed method provides a reference for the cutting edge design of skiving cutters for face gear pairs.
文摘To address the severe challenges of PM_(2.5) and ozone co-control during the"14^(th) Five-Year Plan"period and to enhance the precision and intelligence level of air environment governance,it is imperative to build an efficient comprehensive management platform for regional air quality.In this paper,the specific practice in Zibo City,Shandong Province is as an example to systematically analyze the top-level design,technical implementation,and innovative application of a comprehensive management platform for regional air quality integrating"perception monitoring,data fusion,research judgment of early warnings,analysis of sources,collaborative dispatching,and evaluation assessment".Through the construction of an"sky-air-ground"integrated three-dimensional monitoring network,the platform integrates multi-source heterogeneous environmental data,and employs big data,cloud computing,artificial intelligence,CALPUFF/CMAQ,and other numerical model technologies to achieve comprehensive perception,precise prediction,intelligent source tracing,and closed-loop management of air pollution.The platform innovatively establishes a full-process closed-loop management mechanism of"data-early warning-disposition-evaluation",and achieves a fundamental transformation from passive response to active anticipation and from experience-based judgment to data driving in environmental supervision.The application results show that this platform significantly improves the scientific decision-making ability and collaborative execution efficiency of air pollution governance in Zibo City,providing a replicable and scalable comprehensive solution for similar industrial cities to achieve the continuous improvement of air quality.
基金Project (No. 50175018) supported by the National Natural ScienceFoundation of China
文摘Applications are limited at present because the currently available ultrasonic motors (USMs) do not provide suffi-ciently high torque and power. The conventional travelling-wave USM needs the bearing to support, which required lubricant. To solve the above problem, a bearingless travelling-wave USM is designed. First, a novel structure of the two-sided USM consisting of a two-sided teeth stator and two disk-type rotors is designed. And the excitation principle of the two-sided travelling-wave USM is analyzed. Then, using ANSYS software, we set up the model of the stator to predict the excitation frequency and modal response of the stator. The shape of the vibration mode was obtained. Last, the load characteristics of the USM are measured using ex-perimental method. The maximum stall torque and the no-load speed were obtained. The results showed that the characteristics of the two-sided USM are better than those of the conventional one-sided USM.
文摘In this study, forced nonlinear vibration of a circular micro-plate under two-sided electrostatic, two-sided Casimir and external harmonic forces is investigated analytically. For this purpose, at first, von Karman plate theory including geometrical nonlinearity is used to obtain the deflection of the micro-plate. Galerkin decomposition method is then employed, and nonlinear ordinary differential equations (ODEs) of motion are determined. A harmonic balance method (HBM) is applied to equations and analytical relation for nonlineaT frequency response (F-R) curves are derived for two categories (including and neglecting Casimir force) separately. The analytical results for three cases:(1) semi-linear vibration;(2) weakly nonlinear vibration;(3) highly non linear vibration, are validated by comparing with the numerical solutio ns. After validation, the effects of the voltage and Casimir force on the natural frequency of two-sided capacitor system are investigated. It is shown that by assuming Casimir force in small gap distances, reduction of the natural frequency is considerable. The influences of the applied voltage, damping, micro-plate thickness and Casimir force on the frequency response curves have been presented too. The results of this study can be useful for modeling circular parallel-plates in nano /microelectromechanical transducers such as microphones and pressure sensors.
基金Supported by National Natural Science Foundation of China(Grant Nos.51275366,50875190,51305311)Specialized Research Fund for the Doctoral Program of Higher Education of China(Grant No.20134219110002)
文摘Due to the NP-hardness of the two-sided assembly line balancing （TALB） problem, multiple constraints existing in real applications are less studied, especially when one task is involved with several constraints. In this paper, an effective hybrid algorithm is proposed to address the TALB problem with multiple constraints （TALB-MC）. Considering the discrete attribute of TALB-MC and the continuous attribute of the standard teaching-learning-based optimization （TLBO） algorithm, the random-keys method is hired in task permutation representation, for the purpose of bridging the gap between them. Subsequently, a special mechanism for handling multiple constraints is developed. In the mechanism, the directions constraint of each task is ensured by the direction check and adjustment. The zoning constraints and the synchronism constraints are satisfied by teasing out the hidden correlations among constraints. The positional constraint is allowed to be violated to some extent in decoding and punished in cost fimction. Finally, with the TLBO seeking for the global optimum, the variable neighborhood search （VNS） is further hybridized to extend the local search space. The experimental results show that the proposed hybrid algorithm outperforms the late acceptance hill-climbing algorithm （LAHC） for TALB-MC in most cases, especially for large-size problems with multiple constraints, and demonstrates well balance between the exploration and the exploitation. This research proposes an effective and efficient algorithm for solving TALB-MC problem by hybridizing the TLBO and VNS.
基金Key Projectof Scientific and TechnologicalCommittee of Shanghai(No.0 3 11110 0 5 )
文摘A two-sided assembly line is typically found in plants producing large-sized products. Its advantages over a one-sided line and the difficulties faced in two-sided line balancing problems were discussed. A mathematical model for two-ALB problem was suggested. A modification of the “ranked positional weight” method, namely two-ALB RPW for two-ALB problems was developed. Experiments were carried out to verify the performance of the proposed method and the results show that it is effective in solving two-sided assembly line balancing problems.
基金financially supported by the National Natural Science Foundation of China(Grant No.51239007)
文摘The size and shape of the effective test area are crucial to consider when short-crested waves are created by segmented wavemakers. The range of the effective test area of short-crested waves simulated by two-sided segmented wavemakers is analyzed in this paper. The experimental investigation on the wave field distribution of short-crested waves generated by two-sided segmented wavemakers is conducted by using an array of wave gauges. Wave spectra and directional spreading function are analyzed and the results show that when the main direction is at a certain angle with the normal line of wave generators, the wave field of 3D short-crested waves generated by two-sided segmented wavemakers has good spatial uniformity within the model test area. The effective test area can provide good wave environments for seakeeping model tests of various ocean engineering structures in the deep ocean engineering basin.
文摘In this paper, we consider the two-sided first exit problem for jump diffusion processes having jumps with rational Laplace transforms. We investigate the probabilistic property of conditional memorylessness, and drive the joint distribution of the first exit time from an interval and the overshoot over the boundary at the exit time.
基金supported by the National Natural Science Foundation in China(Yue Qi,Project No.71861015).
文摘In previous research on two-sided matching(TSM)decision,agents’preferences were often given in the form of exact values of ordinal numbers and linguistic phrase term sets.Nowdays,the matching agent cannot perform the exact evaluation in the TSM situations due to the great fuzziness of human thought and the complexity of reality.Probability hesitant fuzzy sets,however,have grown in popularity due to their advantages in communicating complex information.Therefore,this paper develops a TSM decision-making approach with multi-attribute probability hesitant fuzzy sets and unknown attribute weight information.The agent attribute weight vector should be obtained by using the maximum deviation method and Hamming distance.The probabilistic hesitancy fuzzy information matrix of each agent is then arranged to determine the comprehensive evaluation of two matching agent sets.The agent satisfaction degree is calculated using the technique for order preference by similarity to ideal solution(TOPSIS).Additionally,the multi-object programming technique is used to establish a TSM method with the objective of maximizing the agent satisfaction of two-sided agents,and the matching schemes are then established by solving the built model.The study concludes by providing a real-world supply-demand scenario to illustrate the effectiveness of the proposed method.The proposed method is more flexible than prior research since it expresses evaluation information using probability hesitating fuzzy sets and can be used in scenarios when attribute weight information is unclear.
文摘In this paper, existence and uniqueness of solution to two-point boundary value for two-sided fractional differential equations involving Caputo fractional derivative is discussed, by means of the Min-Max Theorem.
基金supported by the National Natural Science Foundation of China (Grant No.71861015)the Humanities and Social Science Foundation of the Ministry of Education of China (Grant No.18YJA630047)the Distinguished Young Scholar Talent of Jiangxi Province (Grant No.20192BCBL23008).
文摘In this paper,a stable two-sided matching(TSM)method considering the matching intention of agents under a hesitant fuzzy environment is proposed.The method uses a hesitant fuzzy element(HFE)as its basis.First,the HFE preference matrix is transformed into the normalized HFE preference matrix.On this basis,the distance and the projection of the normalized HFEs on positive and negative ideal solutions are calculated.Then,the normalized HFEs are transformed into agent satisfactions.Considering the stable matching constraints,a multiobjective programming model with the objective of maximizing the satisfactions of two-sided agents is constructed.Based on the agent satisfaction matrix,the matching intention matrix of two-sided agents is built.According to the agent satisfaction matrix and matching intention matrix,the comprehensive satisfaction matrix is set up.Furthermore,the multiobjective programming model based on satisfactions is transformed into a multiobjective programming model based on comprehensive satisfactions.Using the G-S algorithm,the multiobjective programming model based on comprehensive satisfactions is solved,and then the best TSM scheme is obtained.Finally,a terminal distribution example is used to verify the feasibility and effectiveness of the proposed method.
基金the National Natural Science Foundation of China(10271091)
文摘In this paper, we study the logarithmic Sobolev inequalities for two-sided birth-death processes. An estimate of the logarithmic Sobolev constant α for a two-sided birth-death process is obtained by the Hardy-type inequality and a criteria for a is also presented.
文摘The composition and production technology of the type of hot-rolled steel plate used in two-sided enameling were briefly described. The microstructure and mechanical properties before and after enameling were contrastively investigated,and the precipitates in the samples were analyzed using transmission electron microscope and energy dispersive spectrometer. The results show the ferrite grain size of the steel plate after high-temperature enamel firing to be fine,with a large number of TiC and Ti;C;S;precipitates dispersed throughout the ferrite matrix. After two rounds of enamel firing at a temperature range of 800-890 ℃,its yield strength can still reach342 MPa. The results of a hydrogen permeation test show that the hydrogen storage properties of the steel plate are much better than those of ordinary structural carbon steel. A better bubble structure in the enamel layer can be obtained by this steel plate,with no fish-scale defects on the enameled steel-plate surface.
文摘This article describes some dynamic aspects on dynastic utility incorporating two-sided altruism with an OLG setting. The special case is analyzed where the weights of two-sided altruism are dynamically inconsistent. The Bellman equation for two-sided altruism proves to be reduced to one-sided dynamic problem, but the effective discount factor is different only in the current generation. It is shown that a contraction mapping result of value function cannot be achieved in general, and that there can locally exist an infinite number of self-consistent policy functions of the class C＂ with distinct steady states （indeterminacy of self-consistent, differentiable policy functions）.
基金supported in part by the National Natural Science Foundation of China under Grant 52077002。
文摘Model predictive control(MPC)has been deemed as an attractive control method in motor drives by virtue of its simple structure,convenient multi-objective optimization,and satisfactory dynamic performance.However,the strong reliance on mathematical models seriously restrains its practical application.Therefore,improving the robustness of MPC has attained significant attentions in the last two decades,followed by which,model-free predictive control(MFPC)comes into existence.This article aims to reveal the current state of MFPC strategies for motor drives and give the categorization from the perspective of implementation.Based on this review,the principles of the reported MFPC strategies are introduced in detail,as well as the challenges encountered in technology realization.In addition,some of typical and important concepts are experimentally validated via case studies to evaluate the performance and highlight their features.Finally,the future trends of MFPC are discussed based on the current state and reported developments.
