A new structural system called a stepped wall-frame structure is proposed in this study to solve the bottom yielding problem of RC frames, which widely occurred during previous earthquakes such as thc Wcnchuan and Yus...A new structural system called a stepped wall-frame structure is proposed in this study to solve the bottom yielding problem of RC frames, which widely occurred during previous earthquakes such as thc Wcnchuan and Yushu earthquakes in China. A 1/5 scale ordinary RC frame model and a stepped wall-frame model were subjected to shake table motions together to study the seismic behavior of the new structural system. This paper presents the dynamic characteristics, the seismic responses and the failure and collapse mechanism of the two models under low, moderate and high intensity shaking. The test results and further analysis demonstrate that the seismic performance of stepped wall-frame structures is superior to ordinary RC frames in terms of the well-controlled deformation pattern and more uniformly distributed damage. The stepped wall can effectively suppress the bottom yielding mechanism, and is simple, economical and practical tbr engineering practice.展开更多
Model tests and numerical analyses of stepped reinforced retaining wall were performed to investigate the effects of rheology of backfill and creep of geogrids on the long-term performance of the structure.The geogrid...Model tests and numerical analyses of stepped reinforced retaining wall were performed to investigate the effects of rheology of backfill and creep of geogrids on the long-term performance of the structure.The geogrid tensions,soil pressures,wall deformations and foundation pressure were measured during model construction and loading.A visco-elasto-plastic model and an empirical nonlinear visco-elastic model were utilized to simulate the stresses and deformations of geogrid-reinforced earth-retaining wall under long-term loads.By comparing test data with numerical results,it is shown that the foundation pressure distribution is nonlinear,and the lateral constraint of geogrids for backfill can cause a redistribution of foundation pressure.The curve of soil pressure is outside convex at each step initially,and it is close to the distribution for the case of vertical wall subsequently.The variation trend of geogrid tensions at different heights is obtained.Moreover,the failure mechanism and development mode of potential slip surface in retaining wall are proposed.展开更多
Introduction:Rotatory chair testing has been used to evaluate horizontal canal function.Frequently used tests include sinusoidal harmonic acceleration test(SHAT)and velocity step test(VST).Objectives:Assessment of age...Introduction:Rotatory chair testing has been used to evaluate horizontal canal function.Frequently used tests include sinusoidal harmonic acceleration test(SHAT)and velocity step test(VST).Objectives:Assessment of age effect on the SHAT and VST and assessment of test-retest reliability of the parameters of those two tests.Methods:A prospective study was performed on 100 subjects with no ear or vestibular complaints and normal vestibular evaluation.They were divided into two groups;Group A:below 50 years of age and Group B:50 years of age or above.SHAT was presented at frequencies 0.02,0.04,0.08,0.16,0.32,0.64 Hz with a peak velocity of 60°/s.VST was performed using a maximum velocity of 100°/s with acceleration and deceleration of 200°/s2.Thirty subjects were tested twice to assess reliability.Results:Study participants ranged in age from 20 to 67 years.Regarding group A,the mean age was30.92±7.31 and 55.36±4.61 for group B.No significant differences were found in SHAT parameters between the two groups.As well,there was no significant difference in VST per-rotatory time constant,however,post-rotatory time constant was significantly longer for Group B(P value<0.05).Intraclass correlation coefficient(ICC)values showed moderate to good reliability(ICC 0.5800.818)for SHAT parameters for the lower frequencies and indicated moderate reliability for VST time constant(ICC 0.5090.652).Conclusions:Age has no significant effect on the parameters of SHAT and VST.Test-retest reliability is generally good for both tests.展开更多
Although the step degree of nonlinearity has been introduced to conduct basic analysis and error propagation analysis for the pseudodynamic testing of nonlinear systems, it cannot be reliably used to select an appropr...Although the step degree of nonlinearity has been introduced to conduct basic analysis and error propagation analysis for the pseudodynamic testing of nonlinear systems, it cannot be reliably used to select an appropriate time step before performing a pseudodynamic test. Therefore, a novel parameter of instantaneous degree of nonlinearity is introduced to monitor the stiffness change at the end of a time step, and can thus be used to evaluate numerical and error propagation properties for nonlinear systems. Based on these properties, it is possible to select an appropriate time step to conduct a pseudodynamic test in advance. This possibility is very important in pseudodynamic testing, since the use of an arbitrary time step might lead to unreliable results or even destroy the test specimen. In this paper, guidelines are proposed for choosing an appropriate time step for accurate integration of nonlinear systems. These guidelines require estimation of the maximum instantaneous degree of nonlinearity and the solution of the initial natural frequency. The Newmark explicit method is chosen for this study. All the analytical results and the guidelines proposed are thoroughly confirmed with numerical examples.展开更多
Double-crossed-step-stress(DCSS) accelerated life test(ALT) method is widely used for estimating the lifetime of products with high reliability and long lifetime. In order to further reduce the test time and test cost...Double-crossed-step-stress(DCSS) accelerated life test(ALT) method is widely used for estimating the lifetime of products with high reliability and long lifetime. In order to further reduce the test time and test cost, a double-synchronous-step-stress(DSSS) ALT method which combines a double-synchronous-step-downstress(DSSDS) ALT method and a double-synchronous-step-up-stress(DSSUS) ALT method is proposed. The accelerated stresses decrease and increase in a synchronous way with one step in the DSSDS-ALT and DSSUSALT methods, respectively. Monte Carlo method is adopted to simulate the two methods, and the validity and efficiency of them are demonstrated by the simulation results. In addition, a comparison analysis of efficiency between DSSDS-ALT method and DSSUS-ALT method is carried out. The result shows that the DSSDS-ALT method compared with the DSSUS-ALT method can significantly improve the test efficiency under the same test condition.展开更多
Introduction: Although many cardiopulmonary patients require home care services, the 6-minute walk test (6MWT) is unusable in most dwellings for objectively evaluating exercise capacity because it requires a 20 - 30 m...Introduction: Although many cardiopulmonary patients require home care services, the 6-minute walk test (6MWT) is unusable in most dwellings for objectively evaluating exercise capacity because it requires a 20 - 30 meter hallway. To meet this need, we developed a 2-minute step test (2MST): stepping up and down an 8 inch step for 2 minutes (1 step = bilateral step up + step down). Purpose: Evaluate the statistical validity, reproducibility, and sensitivity of the 2MST in assessing exercise capacity. Method: We compared the heart rate, oxygen saturation and perceived exertion obtained during performance of 2MST with those obtained during the 6MWT. Results: Comparing 2MST and 6MWT in 158 subjects for validity, r = 0.925 (P Conclusion: The 2MST is valid, reproducible, sensitive, safe, well-tolerated, and is a suitable substitute for the 6MWT.展开更多
Under Type-Ⅱ progressively hybrid censoring, this paper discusses statistical inference and optimal design on stepstress partially accelerated life test for hybrid system in presence of masked data. It is assumed tha...Under Type-Ⅱ progressively hybrid censoring, this paper discusses statistical inference and optimal design on stepstress partially accelerated life test for hybrid system in presence of masked data. It is assumed that the lifetime of the component in hybrid systems follows independent and identical modified Weibull distributions. The maximum likelihood estimations(MLEs)of the unknown parameters, acceleration factor and reliability indexes are derived by using the Newton-Raphson algorithm. The asymptotic variance-covariance matrix and the approximate confidence intervals are obtained based on normal approximation to the asymptotic distribution of MLEs of model parameters. Moreover,two bootstrap confidence intervals are constructed by using the parametric bootstrap method. The optimal time of changing stress levels is determined under D-optimality and A-optimality criteria.Finally, the Monte Carlo simulation study is carried out to illustrate the proposed procedures.展开更多
Through the failure mechanism analysi s and simulation test of a certain kind of detonator,this paper confirms the str ess level of the stepping stress acceleration life test of the detonator,and t hen e stablishes th...Through the failure mechanism analysi s and simulation test of a certain kind of detonator,this paper confirms the str ess level of the stepping stress acceleration life test of the detonator,and t hen e stablishes the data processing mathematical model and storage life forecasting m ethod.At last,according to the result of the stepping stress acceleration lif e test of the detonator,this paper forecasts the reliable storage life of the detonator under the normal stress level.展开更多
The design of structural components in low-cycle fatigue field often requires the knowledge of the cyclic properties of the material, which are commonly described by the classical relation of Ramberg-Osgood. In order ...The design of structural components in low-cycle fatigue field often requires the knowledge of the cyclic properties of the material, which are commonly described by the classical relation of Ramberg-Osgood. In order to obtain the cyclic curve using experimental data from incremental step tests, four methodologies are described and critically discussed. Three methods differ in the procedure of evaluation of the elastic modulus, while in the last one the experimental data are interpolated with a single non-linear regression. The various techniques were applied to data obtained from tests carried out on stainless steel specimens, and the resulting differences were analysed and quantified. An average behaviour was evaluated considering the total set of data obtained from experimental tests. The choice of the most suitable method is related to both the strain range of interest and the goal for which the results are used.展开更多
The optimum design of equivalent accelerated life testing plan based on proportional hazards-proportional odds model using D-optimality is presented. The defined equivalent test plan is the test plan that has the same...The optimum design of equivalent accelerated life testing plan based on proportional hazards-proportional odds model using D-optimality is presented. The defined equivalent test plan is the test plan that has the same value of the determinant of Fisher information matrix. The equivalent test plan of step stress accelerated life testing （SSALT） to a baseline optimum constant stress accelerated life testing （CSALT） plan is obtained by adjusting the censoring time of SSALT and solving the optimization problem for each case to achieve the same value of the determinant of Fisher information matrix as in the baseline optimum CSALT plan. Numer- ical examples are given finally which demonstrate the equivalent SSALT plan to the baseline optimum CSALT plan reduces almost half of the test time while achieving approximately the same estimation errors of model parameters.展开更多
Principle and operation of Jing-well point temperatures' test is a method to diagnose and treat diseases by measuring and comparing the symmetrical Jing-well point temperature of human body 12 meridians.It is an i...Principle and operation of Jing-well point temperatures' test is a method to diagnose and treat diseases by measuring and comparing the symmetrical Jing-well point temperature of human body 12 meridians.It is an important supplement to traditional Chinese medicine four diagnoses. The theoretical basis are that the Jing-well is closely related to Meridians and Viscera, the basic traditional Chinese medicine principle of 'governing exterior to infer interior' and the balancing phenomenon of Meridians. In this paper, the operation steps and treatment measures of Jing-well point temperatures' test are put forward, and 2 successful cases are given. At the end of this paper, the prospect of this method is discussed.展开更多
基金Special Fund for Earthquake Research under Grant No.201208013National key Technology R&D Program under Grant No.2012BAK15B05Basic Research Fund of Institute of Engineering Mechanics,CEA under Grant No.2010A04
文摘A new structural system called a stepped wall-frame structure is proposed in this study to solve the bottom yielding problem of RC frames, which widely occurred during previous earthquakes such as thc Wcnchuan and Yushu earthquakes in China. A 1/5 scale ordinary RC frame model and a stepped wall-frame model were subjected to shake table motions together to study the seismic behavior of the new structural system. This paper presents the dynamic characteristics, the seismic responses and the failure and collapse mechanism of the two models under low, moderate and high intensity shaking. The test results and further analysis demonstrate that the seismic performance of stepped wall-frame structures is superior to ordinary RC frames in terms of the well-controlled deformation pattern and more uniformly distributed damage. The stepped wall can effectively suppress the bottom yielding mechanism, and is simple, economical and practical tbr engineering practice.
基金Supported by National Natural Science Foundation of China (No. 50678032 and No. 90715042)Key Project of Ministry of Education of China (No. 210176)
文摘Model tests and numerical analyses of stepped reinforced retaining wall were performed to investigate the effects of rheology of backfill and creep of geogrids on the long-term performance of the structure.The geogrid tensions,soil pressures,wall deformations and foundation pressure were measured during model construction and loading.A visco-elasto-plastic model and an empirical nonlinear visco-elastic model were utilized to simulate the stresses and deformations of geogrid-reinforced earth-retaining wall under long-term loads.By comparing test data with numerical results,it is shown that the foundation pressure distribution is nonlinear,and the lateral constraint of geogrids for backfill can cause a redistribution of foundation pressure.The curve of soil pressure is outside convex at each step initially,and it is close to the distribution for the case of vertical wall subsequently.The variation trend of geogrid tensions at different heights is obtained.Moreover,the failure mechanism and development mode of potential slip surface in retaining wall are proposed.
文摘Introduction:Rotatory chair testing has been used to evaluate horizontal canal function.Frequently used tests include sinusoidal harmonic acceleration test(SHAT)and velocity step test(VST).Objectives:Assessment of age effect on the SHAT and VST and assessment of test-retest reliability of the parameters of those two tests.Methods:A prospective study was performed on 100 subjects with no ear or vestibular complaints and normal vestibular evaluation.They were divided into two groups;Group A:below 50 years of age and Group B:50 years of age or above.SHAT was presented at frequencies 0.02,0.04,0.08,0.16,0.32,0.64 Hz with a peak velocity of 60°/s.VST was performed using a maximum velocity of 100°/s with acceleration and deceleration of 200°/s2.Thirty subjects were tested twice to assess reliability.Results:Study participants ranged in age from 20 to 67 years.Regarding group A,the mean age was30.92±7.31 and 55.36±4.61 for group B.No significant differences were found in SHAT parameters between the two groups.As well,there was no significant difference in VST per-rotatory time constant,however,post-rotatory time constant was significantly longer for Group B(P value<0.05).Intraclass correlation coefficient(ICC)values showed moderate to good reliability(ICC 0.5800.818)for SHAT parameters for the lower frequencies and indicated moderate reliability for VST time constant(ICC 0.5090.652).Conclusions:Age has no significant effect on the parameters of SHAT and VST.Test-retest reliability is generally good for both tests.
基金supported by the NSC,Chinese Taipei,Under Grant No.NSC-95-2221-E-027-099
文摘Although the step degree of nonlinearity has been introduced to conduct basic analysis and error propagation analysis for the pseudodynamic testing of nonlinear systems, it cannot be reliably used to select an appropriate time step before performing a pseudodynamic test. Therefore, a novel parameter of instantaneous degree of nonlinearity is introduced to monitor the stiffness change at the end of a time step, and can thus be used to evaluate numerical and error propagation properties for nonlinear systems. Based on these properties, it is possible to select an appropriate time step to conduct a pseudodynamic test in advance. This possibility is very important in pseudodynamic testing, since the use of an arbitrary time step might lead to unreliable results or even destroy the test specimen. In this paper, guidelines are proposed for choosing an appropriate time step for accurate integration of nonlinear systems. These guidelines require estimation of the maximum instantaneous degree of nonlinearity and the solution of the initial natural frequency. The Newmark explicit method is chosen for this study. All the analytical results and the guidelines proposed are thoroughly confirmed with numerical examples.
基金the National Natural Science Foundation of China(Nos.51265025 and 51665029)
文摘Double-crossed-step-stress(DCSS) accelerated life test(ALT) method is widely used for estimating the lifetime of products with high reliability and long lifetime. In order to further reduce the test time and test cost, a double-synchronous-step-stress(DSSS) ALT method which combines a double-synchronous-step-downstress(DSSDS) ALT method and a double-synchronous-step-up-stress(DSSUS) ALT method is proposed. The accelerated stresses decrease and increase in a synchronous way with one step in the DSSDS-ALT and DSSUSALT methods, respectively. Monte Carlo method is adopted to simulate the two methods, and the validity and efficiency of them are demonstrated by the simulation results. In addition, a comparison analysis of efficiency between DSSDS-ALT method and DSSUS-ALT method is carried out. The result shows that the DSSDS-ALT method compared with the DSSUS-ALT method can significantly improve the test efficiency under the same test condition.
文摘Introduction: Although many cardiopulmonary patients require home care services, the 6-minute walk test (6MWT) is unusable in most dwellings for objectively evaluating exercise capacity because it requires a 20 - 30 meter hallway. To meet this need, we developed a 2-minute step test (2MST): stepping up and down an 8 inch step for 2 minutes (1 step = bilateral step up + step down). Purpose: Evaluate the statistical validity, reproducibility, and sensitivity of the 2MST in assessing exercise capacity. Method: We compared the heart rate, oxygen saturation and perceived exertion obtained during performance of 2MST with those obtained during the 6MWT. Results: Comparing 2MST and 6MWT in 158 subjects for validity, r = 0.925 (P Conclusion: The 2MST is valid, reproducible, sensitive, safe, well-tolerated, and is a suitable substitute for the 6MWT.
基金supported by the National Natural Science Foundation of China(71401134 71571144+1 种基金 71171164)the Program of International Cooperation and Exchanges in Science and Technology Funded by Shaanxi Province(2016KW-033)
文摘Under Type-Ⅱ progressively hybrid censoring, this paper discusses statistical inference and optimal design on stepstress partially accelerated life test for hybrid system in presence of masked data. It is assumed that the lifetime of the component in hybrid systems follows independent and identical modified Weibull distributions. The maximum likelihood estimations(MLEs)of the unknown parameters, acceleration factor and reliability indexes are derived by using the Newton-Raphson algorithm. The asymptotic variance-covariance matrix and the approximate confidence intervals are obtained based on normal approximation to the asymptotic distribution of MLEs of model parameters. Moreover,two bootstrap confidence intervals are constructed by using the parametric bootstrap method. The optimal time of changing stress levels is determined under D-optimality and A-optimality criteria.Finally, the Monte Carlo simulation study is carried out to illustrate the proposed procedures.
文摘Through the failure mechanism analysi s and simulation test of a certain kind of detonator,this paper confirms the str ess level of the stepping stress acceleration life test of the detonator,and t hen e stablishes the data processing mathematical model and storage life forecasting m ethod.At last,according to the result of the stepping stress acceleration lif e test of the detonator,this paper forecasts the reliable storage life of the detonator under the normal stress level.
文摘The design of structural components in low-cycle fatigue field often requires the knowledge of the cyclic properties of the material, which are commonly described by the classical relation of Ramberg-Osgood. In order to obtain the cyclic curve using experimental data from incremental step tests, four methodologies are described and critically discussed. Three methods differ in the procedure of evaluation of the elastic modulus, while in the last one the experimental data are interpolated with a single non-linear regression. The various techniques were applied to data obtained from tests carried out on stainless steel specimens, and the resulting differences were analysed and quantified. An average behaviour was evaluated considering the total set of data obtained from experimental tests. The choice of the most suitable method is related to both the strain range of interest and the goal for which the results are used.
文摘The optimum design of equivalent accelerated life testing plan based on proportional hazards-proportional odds model using D-optimality is presented. The defined equivalent test plan is the test plan that has the same value of the determinant of Fisher information matrix. The equivalent test plan of step stress accelerated life testing （SSALT） to a baseline optimum constant stress accelerated life testing （CSALT） plan is obtained by adjusting the censoring time of SSALT and solving the optimization problem for each case to achieve the same value of the determinant of Fisher information matrix as in the baseline optimum CSALT plan. Numer- ical examples are given finally which demonstrate the equivalent SSALT plan to the baseline optimum CSALT plan reduces almost half of the test time while achieving approximately the same estimation errors of model parameters.
文摘Principle and operation of Jing-well point temperatures' test is a method to diagnose and treat diseases by measuring and comparing the symmetrical Jing-well point temperature of human body 12 meridians.It is an important supplement to traditional Chinese medicine four diagnoses. The theoretical basis are that the Jing-well is closely related to Meridians and Viscera, the basic traditional Chinese medicine principle of 'governing exterior to infer interior' and the balancing phenomenon of Meridians. In this paper, the operation steps and treatment measures of Jing-well point temperatures' test are put forward, and 2 successful cases are given. At the end of this paper, the prospect of this method is discussed.
