A new method is proposed for the determination of the parameters in a two-dimensionalmodel which characterizes the properties of axial and radial mixing and mass transport in afixed-bed adsorber.Parameter estimation f...A new method is proposed for the determination of the parameters in a two-dimensionalmodel which characterizes the properties of axial and radial mixing and mass transport in afixed-bed adsorber.Parameter estimation for the model is carried out with methane-air-5A molecularsieve in a bed under the condition of step injection of tracer from a point on the main axis of thebed by the curve fitting method in the time domain.展开更多
The inherent catalytic anisotropy of two-dimensional(2D) materials has limited the enhancement of LiO_(2) batteries(LOBs) performance due to the significantly different adsorption energies on 2D and edge surfaces.Tuni...The inherent catalytic anisotropy of two-dimensional(2D) materials has limited the enhancement of LiO_(2) batteries(LOBs) performance due to the significantly different adsorption energies on 2D and edge surfaces.Tuning the adsorption strength in 2D materials to the reaction intermediates is essential for achieving high-performance LOBs.Herein,a MnS/MoS_(2) heterostructure is designed as a cathode catalyst by adjusting the adsorption behavior at the surface.Different from the toroidal-like discharge products on the MoS_(2) cathode,the MnS/MoS_(2) surface displays an improved adsorption energy to reaction species,thereby promoting the growth of the film-like discharge products.MnS can disturb the layer growth of MoS_(2),in which the stack edge plane features a strong interaction with the intermediates and limits the growth of the discharge products.Experimental and theoretical results confirm that the MnS/MoS_(2) heterostructure possesses improved electron transfer kinetics at the interface and plays an important role in the adsorption process for reaction species,which finally affects the morphology of Li_2O_(2),In consequence,the MnS/MoS_(2) heterostructure exhibits a high specific capacity of 11696.0 mA h g^(-1) and good cycle stability over 1800 h with a fixed specific capacity of 600 mA h g^(-1) at current density of100 mA g^(-1) This work provides a novel interfacial engineering strategy to enhance the performance of LOBs by tuning the adsorption properties of 2D materials.展开更多
The great Tancheng earthquake of M81/2 occurred in 1668 was the largest seismic event ever recorded in history in eastern China. This study determines the fault geometry of this earthquake by inverting seismological ...The great Tancheng earthquake of M81/2 occurred in 1668 was the largest seismic event ever recorded in history in eastern China. This study determines the fault geometry of this earthquake by inverting seismological data of present-day moderate-small earthquakes in the focal area. We relocated those earthquakes with the double-difference method and found focal mechanism solutions using gird test method. The inversion results are as follows： the strike is 21.6°, the dip angle is 89.5°, the slip angle is 170°, the fault length is about 160 km, the lower-boundary depth is about 32 km and the buried depth of upper boundary is about 4 km. This shows that the seismic fault is a NNE-trending upright right-lateral strike-slip fault and has cut through the crust. Moreover, the surface seismic fault, intensity distribution of the earthquake, earthquake-depth distribution and seismic-wave velocity profile in the focal area all verified our study result.展开更多
Angle-resolved polarized Raman（ARPR） spectroscopy can be utilized to assign the Raman modes based on crystal symmetry and Raman selection rules and also to characterize the crystallographic orientation of anisotropi...Angle-resolved polarized Raman（ARPR） spectroscopy can be utilized to assign the Raman modes based on crystal symmetry and Raman selection rules and also to characterize the crystallographic orientation of anisotropic materials.However, polarized Raman measurements can be implemented by several different configurations and thus lead to different results. In this work, we systematically analyze three typical polarization configurations： 1） to change the polarization of the incident laser, 2） to rotate the sample, and 3） to set a half-wave plate in the common optical path of incident laser and scattered Raman signal to simultaneously vary their polarization directions. We provide a general approach of polarization analysis on the Raman intensity under the three polarization configurations and demonstrate that the latter two cases are equivalent to each other. Because the basal plane of highly ordered pyrolytic graphite（HOPG） exhibits isotropic feature and its edge plane is highly anisotropic, HOPG can be treated as a modelling system to study ARPR spectroscopy of twodimensional materials on their basal and edge planes. Therefore, we verify the ARPR behaviors of HOPG on its basal and edge planes at three different polarization configurations. The orientation direction of HOPG edge plane can be accurately determined by the angle-resolved polarization-dependent G mode intensity without rotating sample, which shows potential application for orientation determination of other anisotropic and vertically standing two-dimensional materials and other materials.展开更多
In practical engineering,the total vertical stress in the soil layer is not constant due to stress diffusion,and varies with time and depth.Therefore,the purpose of this paper is to investigate the effect of stress di...In practical engineering,the total vertical stress in the soil layer is not constant due to stress diffusion,and varies with time and depth.Therefore,the purpose of this paper is to investigate the effect of stress diffusion on the two-dimensional(2D)plane strain consolidation properties of unsaturated soils when the stress varies with time and depth.A series of semi-analytical solutions in terms of excess pore air and water pressures and settlement for 2D plane strain consolidation of unsaturated soils can be derived with the joint use of Laplace transform and Fourier sine series expansion.Then,the inverse Laplace transform of the semi-analytical solution is given in the time domain using a self-programmed code based on Crump’s method.The reliability of the obtained solutions is proved by the degeneration.Finally,the 2D plots of excess pore pressures and the curves of settlement varying with time,considering different physical parameters of unsaturated soil stratum and depth-dependent stress,are depicted and analyzed to study the 2D plane strain consolidation properties of unsaturated soils subjected to the depthdependent stress.展开更多
A linear 4-node quadrilateral quasi-conforming plane element with internal parameters is proposed. The element preserves advantages of the quasi-conforming technique, including an explicit stiffness matrix, which can ...A linear 4-node quadrilateral quasi-conforming plane element with internal parameters is proposed. The element preserves advantages of the quasi-conforming technique, including an explicit stiffness matrix, which can be applied to nonlinear problems. The weak patch test guarantees the convergence of the element. Then the linear element is extended to the geometri- cally nonlinear analysis in the framework of Total Lagrangian （TL） formulation. The numerical tests indicate that the present element is accurate and insensitive to mesh distortion.展开更多
Free abrasive particle machining in simple machine such as: honing, polishing can get higher surface finish mirror, but surface error, and working procedure is hard to control. Therefore, the vertical disposed ultra-p...Free abrasive particle machining in simple machine such as: honing, polishing can get higher surface finish mirror, but surface error, and working procedure is hard to control. Therefore, the vertical disposed ultra-precision plane honing method by ultra-particle diamond honing wheel is put forward to. The results of experiments indicate: plane-honing wheel has higher machining accuracy and machining efficiency. But at the same time the structure parameters of honing wheel effects on machining accuracy. By analyzing the relation of honing wheel structure parameters and workpiece machining accuracy, the relation of honing wheel and wear coefficient, then this paper gets honing wheel structure parameters in the condition of best accuracy coefficient and wear coefficient, and resolve the problem of choosing honing wheel structure parameters in ultra-precision plane honing at last. This paper analyses the relation of honing wheel structure parameters and workpiece machining accuracy coefficient and wear coefficient, by building relative movement math model of honing wheel and workpiece in plane honing. Through theory calculating, the result indicate: about honing machine tools for large volume manufacture, honing wheel wear is main effect factor, so honing wheel should adopt obverse triangle radial structure. About honing machining for high accuracy and low-batch quantities, machining accuracy coefficient is main factors; so honing wheel should adopt reverse triangle radial structure. Neglected the manufacturing factors of honing wheel, then we can design honing wheel with high power curve structure to meet the need of machining accuracy coefficient and honing wheel wear coefficient in higher accuracy honing.展开更多
For the last few decades,the parameter estimation of electromagnetic plane waves i.e.,far field sources,impinging on antenna array geometries has attracted a lot of researchers due to their use in radar,sonar and unde...For the last few decades,the parameter estimation of electromagnetic plane waves i.e.,far field sources,impinging on antenna array geometries has attracted a lot of researchers due to their use in radar,sonar and under water acoustic environments.In this work,nature inspired heuristics based on the flower pollination algorithm(FPA)is designed for the estimation problem of amplitude and direction of arrival of far field sources impinging on uniform linear array(ULA).Using the approximation in mean squared error sense,a fitness function of the problem is developed and the strength of the FPA is utilized for optimization of the cost function representing scenarios for various number of sources non-coherent located in the far field.The worth of the proposed FPA based nature inspired computing heuristic is established through assessment studies on fitness,histograms,cumulative distribution function and box plots analysis.The other worthy perks of the proposed scheme include simplicity of concept,ease in the implementation,extendibility and wide range of applicability to solve complex optimization problems.These salient features make the proposed approach as an attractive alternative to be exploited for solving different parameter estimation problems arising in nonlinear systems,power signal modelling,image processing and fault diagnosis.展开更多
Water quality models are important tools to support the optimization of aquatic ecosystem rehabilitation programs and assess their efficiency. Basing on the flow conditions of the Daqinghe River Mouth of the Dianchi L...Water quality models are important tools to support the optimization of aquatic ecosystem rehabilitation programs and assess their efficiency. Basing on the flow conditions of the Daqinghe River Mouth of the Dianchi Lake, China, a two-dimensional water quality model was developed in the research. The hydrodynamics module was numerically solved by the alternating direction iteration （ADI） method. The parameters of the water quality module were obtained through the in situ experiments and the laboratory analyses that were conducted from 2006 to 2007. The model was calibrated and verified by the observation data in 2007. Among the four modelled key variables, i.e., water level, COD （in CODcr）, NH4＋-N and PO43-P the minimum value of the coefficient of determination （COD） was 0.69, indicating the model performed reasonably well. The developed model was then applied to simulate the water quality changes at a downstream cross-section assuming that the designed restoration programs were implemented. According to the simulated results, the restoration programs could cut down the loads of COD and PO43-P about 15%. Such a load reduction, unfortunately, would have very little effect on the NH4^＋-N removal. Moreover, the water quality at the outlet cross-section would be still in class V （3838-02）, indicating more measures should be taken to further reduce the loads. The study demonstrated the capability of water quality models to support aquatic ecosystem restorations.展开更多
In this paper we study the existence and stability of two-dimensional discrete gap breathers in a two-dimensional diatomic face-centered square lattice consisting of alternating light and heavy atoms, with on-site pot...In this paper we study the existence and stability of two-dimensional discrete gap breathers in a two-dimensional diatomic face-centered square lattice consisting of alternating light and heavy atoms, with on-site potential and coupling potential. This study is focused on two-dimensional breathers with their frequency in the gap that separates the acoustic and optical bands of the phonon spectrum. We demonstrate the possibility of the existence of two-dimensional gap breathers by using a numerical method. Six types of two-dimensional gap breathers are obtained, i.e., symmetric, mirror-symmetric and asymmetric, whether the center of the breather is on a light or a heavy atom. The difference between one-dimensional discrete gap breathers and two-dimensional discrete gap breathers is also discussed. We use Aubry＇s theory to analyze the stability of discrete gap breathers in the two-dimensional diatomic face-centered square lattice.展开更多
The rock mass consists of rock blocks and structural planes,which can reduce its integrity and strength.Therefore,accurately obtaining the characteristics of the rock mass structural plane is a prerequisite for evalua...The rock mass consists of rock blocks and structural planes,which can reduce its integrity and strength.Therefore,accurately obtaining the characteristics of the rock mass structural plane is a prerequisite for evaluating stability and designing supports in underground engineering.Currently,there are no effective testing methods for the characteristic parameters of the rock mass structural plane in underground engineering.The paper presents the digital drilling technology as a new testing method of rock mass structural planes.Flawed rock specimens with cracks of varying widths and angles were used to simulate the rock mass structural planes,and the multifunctional rock mass digital drilling test system was employed to carry out the digital drilling tests.The analysis focuses on the variation laws of drilling parameters,such as drilling pressure and drilling torque,affected by the characteristics of prefabricated cracks,and clarifies the degradation mechanism of rock equivalent compressive strength.Additionally,an identification model for the characteristic parameters of rock mass structural planes during drilling is established.The test results indicate that the average difference of the characteristics of prefabricated cracks identified by the equivalent compressive strength is 2.45°and 0.82 mm,respectively.The identification model while drilling is verified to be correct due to the high identification accuracy.Based on this,a method for testing the characteristic parameters of the surrounding rock structural plane while drilling is proposed.The research offers a theoretical and methodological foundation for precise in situ identification of structural planes of the surrounding rock in underground engineering.展开更多
Study on failure of soft stratum of roller compacted concrete (RCC) is an important aspect of stability of high RCC dam. Six kinds of specimens with different interfaces were investigated by wedge splitting method. Do...Study on failure of soft stratum of roller compacted concrete (RCC) is an important aspect of stability of high RCC dam. Six kinds of specimens with different interfaces were investigated by wedge splitting method. Double-K fracture parameters (initial fracture parameter and unsteady fracture parameter) were calculated by the concrete double-K fracture theory. It is indicated that the approach of construction joint or old joint after RCC final set is the most efficient among the six cases, and its fracture parameter is the largest among them. Its propagation path is sinuous. Its failure surface is scraggly. Bedding plane crack fails at the underside of the concrete surface, bond course or the surface between them for each approach. So disturbance on the underside of the concrete surface should be avoided or decreased at best during RCC construction.展开更多
Verifiable secret sharing is a special kind of secret sharing. In this paper, A secure and efficient threshold secret sharing scheme is proposed by using the plane parametric curve on the basis of the principle of sec...Verifiable secret sharing is a special kind of secret sharing. In this paper, A secure and efficient threshold secret sharing scheme is proposed by using the plane parametric curve on the basis of the principle of secret sharing. And the performance of this threshold scheme is analyzed. The results reveal that the threshold scheme has its own advantage of one-parameter representation for a master key, and it is a perfect ideal secret sharing scheme. It can easily detect cheaters by single operation in the participants so that the probability of valid cheating is less than 1/p (where p is a large prime).展开更多
Recently, Zhang et al. （Chin. Phys. B 26 024208 （2017）） investigated the band gap structures and semi-Dirac point of two-dimensional function photonic crystals, and the equations for the plane wave expansion metho...Recently, Zhang et al. （Chin. Phys. B 26 024208 （2017）） investigated the band gap structures and semi-Dirac point of two-dimensional function photonic crystals, and the equations for the plane wave expansion method were induced to obtain the band structures. That report shows the band diagrams with the effects of function coefficient k and medium column ra under TE and TM waves. The proposed results look correct at first glance, but the authors made some mistakes in their report. Thus, the calculated results in their paper are incorrect. According to our calculations, the errors in their report are corrected, and the correct band structures also are presented in this paper.展开更多
We study the two-dimensional above-barrier penetration and the sub-barrier tunneling of non-relativistic particles and photons, described in the quasi-monochromatic approximation by simple plane waves. Our scheme repr...We study the two-dimensional above-barrier penetration and the sub-barrier tunneling of non-relativistic particles and photons, described in the quasi-monochromatic approximation by simple plane waves. Our scheme represents the motion from the left free-motion zero-potential region to the right zero-potential region through the intermediate region with a one-dimensional rectangular potential barrier along the axis, normal to the both parallel interfaces between all three regions, and with the zero potential along the axis, parallel to the those interfaces. We have firstly obtained the analytical expressions for the infinite series of multiple internal and external reflections and also of multiple transmitted waves of particles and photons, with equal shifts between them along the interfaces for the above-barrier penetration and with various shifts between them in the case of the sub-barrier tunneling. Finally the Hartman and Fletcher effect for any transmitted wave is established.展开更多
Objective: To research the clinical application of two-dimensional speckle tracking imaging (2D-STI) in quantitative assessment of left ventricular function in patients with obstructive sleep apnea-hypopnea syndrome (...Objective: To research the clinical application of two-dimensional speckle tracking imaging (2D-STI) in quantitative assessment of left ventricular function in patients with obstructive sleep apnea-hypopnea syndrome (OSAS). Method: From July 2016 to December 2018, 86 patients with OSAS were selected as OSAS group. According to sleep apnea hypopnea index (AHI), they were divided into mild OSAS group (24 cases), moderate OSAS group (29 cases) and severe OSAS group (33 cases). Another 50 healthy volunteers who underwent physical examination in our hospital during the same period were selected as the control group. The left ventricular function of all patients was quantitatively assessed by 2D-STI. The left ventricular function of all patients was quantitatively assessed by 2D-STI. The results of routine echocardiography and left ventricular global strain parameters of the OSAS group, the control group and the OSAS patients with different severity were compared and analyzed. Result: There were no significant differences in the levels of left ventricular ejection fraction (LVEF), left ventricular end diastolic diameter (LVEDd), left ventricular end systolic diameter (LVESd) between the two groups and OSAS patients with different severity (P>0.05). The levels of IVST, LVPW and LVMI in the OSAS group were significantly higher than those in the control group, the levels of end-diastolic interventricular septal thickness (IVS), left ventricular posterior wall thickness (LVPW), left ventricular mass index (LVMI) in the severe OSAS group were significantly higher than those in the mild and moderate OSAS group, and the levels of IVST, LVPW and LVMI in the moderate OSAS group were significantly higher than those in the mild OSAS group, there were significant differences between groups (P<0.05). The levels of GLS, GRS and GCS in the OSAS group were significantly lower than those in the control group (P<0.05). GLS, GRS and GCS levels in the severe OSAS group were significantly lower than those in the mild OSAS group and the moderate OSAS group, while the levels of global longitudinal strain (GLS), global radial strain (GRS) and global circumferential strain (GCS) in the moderate OSAS group were significantly lower than those in the mild OSAS group (P<0.05). Conclusion: The left ventricular systolic function of OSAS patients is obviously impaired. Left ventricular function in OSAS patients can be assessed timely and accurately by two-dimensional speckle tracking imaging.展开更多
Recent installation of an array of broad band seismological stations in Morocco allowed us to study the records of five recent (2005-2008) moderate earthquakes (4.1 ≤ M ≤ 5.1) in order to determine their source para...Recent installation of an array of broad band seismological stations in Morocco allowed us to study the records of five recent (2005-2008) moderate earthquakes (4.1 ≤ M ≤ 5.1) in order to determine their source parameters (seismic moment, fault slip, rupture area and stress drop) from P-wave spectra. We also studied the older Rissani events of 1992 using teleseismic data. Values of Mo, r, Δu and Δσ are, respectively, 1.1 × 1013 - 6 × 1016 Nm;0.50 - 3.9 km;0.8 - 5.8 cm and 0.3 - 1.49 MPa. The results are in accordance with the seismotectonic and geodynamic setting of Morocco as, for instance, the amount of slip along the faults with respect to the relative displacement of Nubia to Iberia (~4 mm·yr-1) determined from GPS data, taking into account the period of stress accumulation. However, some events show very variable corner frequency and low-frequency amplitude values which lead to considerably higher stress drop and fault slip values, especially at the nearest stations, which may reflect some site effects or uncertainties on depth and take-off angles.展开更多
基金Supported by the National Natural Science Foundation of China.
文摘A new method is proposed for the determination of the parameters in a two-dimensionalmodel which characterizes the properties of axial and radial mixing and mass transport in afixed-bed adsorber.Parameter estimation for the model is carried out with methane-air-5A molecularsieve in a bed under the condition of step injection of tracer from a point on the main axis of thebed by the curve fitting method in the time domain.
基金supported by the National Natural Science Foundation of China (52173286, 52207249)Major basic research project of Natural Science Foundation of Shandong Province (ZR2023ZD12)+1 种基金the State Key Laboratory of Marine Resource Utilization in South China Sea (Hainan University) (MRUKF2023013)Open Program of Guangxi Key Laboratory of Information Materials (221024-K)。
文摘The inherent catalytic anisotropy of two-dimensional(2D) materials has limited the enhancement of LiO_(2) batteries(LOBs) performance due to the significantly different adsorption energies on 2D and edge surfaces.Tuning the adsorption strength in 2D materials to the reaction intermediates is essential for achieving high-performance LOBs.Herein,a MnS/MoS_(2) heterostructure is designed as a cathode catalyst by adjusting the adsorption behavior at the surface.Different from the toroidal-like discharge products on the MoS_(2) cathode,the MnS/MoS_(2) surface displays an improved adsorption energy to reaction species,thereby promoting the growth of the film-like discharge products.MnS can disturb the layer growth of MoS_(2),in which the stack edge plane features a strong interaction with the intermediates and limits the growth of the discharge products.Experimental and theoretical results confirm that the MnS/MoS_(2) heterostructure possesses improved electron transfer kinetics at the interface and plays an important role in the adsorption process for reaction species,which finally affects the morphology of Li_2O_(2),In consequence,the MnS/MoS_(2) heterostructure exhibits a high specific capacity of 11696.0 mA h g^(-1) and good cycle stability over 1800 h with a fixed specific capacity of 600 mA h g^(-1) at current density of100 mA g^(-1) This work provides a novel interfacial engineering strategy to enhance the performance of LOBs by tuning the adsorption properties of 2D materials.
基金supported by the National Natural Science Foundation of China(No.90814002)the Natural Science Foundation of Shandong Province(No.Y2005E02)
文摘The great Tancheng earthquake of M81/2 occurred in 1668 was the largest seismic event ever recorded in history in eastern China. This study determines the fault geometry of this earthquake by inverting seismological data of present-day moderate-small earthquakes in the focal area. We relocated those earthquakes with the double-difference method and found focal mechanism solutions using gird test method. The inversion results are as follows： the strike is 21.6°, the dip angle is 89.5°, the slip angle is 170°, the fault length is about 160 km, the lower-boundary depth is about 32 km and the buried depth of upper boundary is about 4 km. This shows that the seismic fault is a NNE-trending upright right-lateral strike-slip fault and has cut through the crust. Moreover, the surface seismic fault, intensity distribution of the earthquake, earthquake-depth distribution and seismic-wave velocity profile in the focal area all verified our study result.
基金supported by the National Key Research and Development Program of China(Grant No.2016YFA0301204)the National Natural Science Foundation of China(Grant Nos.11604326,11434010,11474277,and 11225421)
文摘Angle-resolved polarized Raman（ARPR） spectroscopy can be utilized to assign the Raman modes based on crystal symmetry and Raman selection rules and also to characterize the crystallographic orientation of anisotropic materials.However, polarized Raman measurements can be implemented by several different configurations and thus lead to different results. In this work, we systematically analyze three typical polarization configurations： 1） to change the polarization of the incident laser, 2） to rotate the sample, and 3） to set a half-wave plate in the common optical path of incident laser and scattered Raman signal to simultaneously vary their polarization directions. We provide a general approach of polarization analysis on the Raman intensity under the three polarization configurations and demonstrate that the latter two cases are equivalent to each other. Because the basal plane of highly ordered pyrolytic graphite（HOPG） exhibits isotropic feature and its edge plane is highly anisotropic, HOPG can be treated as a modelling system to study ARPR spectroscopy of twodimensional materials on their basal and edge planes. Therefore, we verify the ARPR behaviors of HOPG on its basal and edge planes at three different polarization configurations. The orientation direction of HOPG edge plane can be accurately determined by the angle-resolved polarization-dependent G mode intensity without rotating sample, which shows potential application for orientation determination of other anisotropic and vertically standing two-dimensional materials and other materials.
基金supported by the National Natural Science Foundation of China(Grant Nos.12172211 and 41630633)the National Key Research and Development Project of China(Grant No.2019YFC1509800).
文摘In practical engineering,the total vertical stress in the soil layer is not constant due to stress diffusion,and varies with time and depth.Therefore,the purpose of this paper is to investigate the effect of stress diffusion on the two-dimensional(2D)plane strain consolidation properties of unsaturated soils when the stress varies with time and depth.A series of semi-analytical solutions in terms of excess pore air and water pressures and settlement for 2D plane strain consolidation of unsaturated soils can be derived with the joint use of Laplace transform and Fourier sine series expansion.Then,the inverse Laplace transform of the semi-analytical solution is given in the time domain using a self-programmed code based on Crump’s method.The reliability of the obtained solutions is proved by the degeneration.Finally,the 2D plots of excess pore pressures and the curves of settlement varying with time,considering different physical parameters of unsaturated soil stratum and depth-dependent stress,are depicted and analyzed to study the 2D plane strain consolidation properties of unsaturated soils subjected to the depthdependent stress.
基金Project supported by the Fundamental Research Funds for the Central Universities(DUT14RC(3)092)the Key Project of the NSFC(Nos.11272075 and 11472071)+1 种基金the‘863’Project of China(No.2009AA04Z101)the‘973’National Basic Research Project of China(No.2010CB832700)
文摘A linear 4-node quadrilateral quasi-conforming plane element with internal parameters is proposed. The element preserves advantages of the quasi-conforming technique, including an explicit stiffness matrix, which can be applied to nonlinear problems. The weak patch test guarantees the convergence of the element. Then the linear element is extended to the geometri- cally nonlinear analysis in the framework of Total Lagrangian （TL） formulation. The numerical tests indicate that the present element is accurate and insensitive to mesh distortion.
文摘Free abrasive particle machining in simple machine such as: honing, polishing can get higher surface finish mirror, but surface error, and working procedure is hard to control. Therefore, the vertical disposed ultra-precision plane honing method by ultra-particle diamond honing wheel is put forward to. The results of experiments indicate: plane-honing wheel has higher machining accuracy and machining efficiency. But at the same time the structure parameters of honing wheel effects on machining accuracy. By analyzing the relation of honing wheel structure parameters and workpiece machining accuracy, the relation of honing wheel and wear coefficient, then this paper gets honing wheel structure parameters in the condition of best accuracy coefficient and wear coefficient, and resolve the problem of choosing honing wheel structure parameters in ultra-precision plane honing at last. This paper analyses the relation of honing wheel structure parameters and workpiece machining accuracy coefficient and wear coefficient, by building relative movement math model of honing wheel and workpiece in plane honing. Through theory calculating, the result indicate: about honing machine tools for large volume manufacture, honing wheel wear is main effect factor, so honing wheel should adopt obverse triangle radial structure. About honing machining for high accuracy and low-batch quantities, machining accuracy coefficient is main factors; so honing wheel should adopt reverse triangle radial structure. Neglected the manufacturing factors of honing wheel, then we can design honing wheel with high power curve structure to meet the need of machining accuracy coefficient and honing wheel wear coefficient in higher accuracy honing.
基金the Deanship of Scientific Research at Majmaah University for supporting this work under Project Number No.R-2021-27.
文摘For the last few decades,the parameter estimation of electromagnetic plane waves i.e.,far field sources,impinging on antenna array geometries has attracted a lot of researchers due to their use in radar,sonar and under water acoustic environments.In this work,nature inspired heuristics based on the flower pollination algorithm(FPA)is designed for the estimation problem of amplitude and direction of arrival of far field sources impinging on uniform linear array(ULA).Using the approximation in mean squared error sense,a fitness function of the problem is developed and the strength of the FPA is utilized for optimization of the cost function representing scenarios for various number of sources non-coherent located in the far field.The worth of the proposed FPA based nature inspired computing heuristic is established through assessment studies on fitness,histograms,cumulative distribution function and box plots analysis.The other worthy perks of the proposed scheme include simplicity of concept,ease in the implementation,extendibility and wide range of applicability to solve complex optimization problems.These salient features make the proposed approach as an attractive alternative to be exploited for solving different parameter estimation problems arising in nonlinear systems,power signal modelling,image processing and fault diagnosis.
基金supported by the National Hi-Tech Research and Development Program (863) of China (No.2007AA06A405, 2005AA6010100401)
文摘Water quality models are important tools to support the optimization of aquatic ecosystem rehabilitation programs and assess their efficiency. Basing on the flow conditions of the Daqinghe River Mouth of the Dianchi Lake, China, a two-dimensional water quality model was developed in the research. The hydrodynamics module was numerically solved by the alternating direction iteration （ADI） method. The parameters of the water quality module were obtained through the in situ experiments and the laboratory analyses that were conducted from 2006 to 2007. The model was calibrated and verified by the observation data in 2007. Among the four modelled key variables, i.e., water level, COD （in CODcr）, NH4＋-N and PO43-P the minimum value of the coefficient of determination （COD） was 0.69, indicating the model performed reasonably well. The developed model was then applied to simulate the water quality changes at a downstream cross-section assuming that the designed restoration programs were implemented. According to the simulated results, the restoration programs could cut down the loads of COD and PO43-P about 15%. Such a load reduction, unfortunately, would have very little effect on the NH4^＋-N removal. Moreover, the water quality at the outlet cross-section would be still in class V （3838-02）, indicating more measures should be taken to further reduce the loads. The study demonstrated the capability of water quality models to support aquatic ecosystem restorations.
基金Project supported by the National Natural Science Foundation of China (Grant No 10574011)the Foundation for Researching Group by Beijing Normal University
文摘In this paper we study the existence and stability of two-dimensional discrete gap breathers in a two-dimensional diatomic face-centered square lattice consisting of alternating light and heavy atoms, with on-site potential and coupling potential. This study is focused on two-dimensional breathers with their frequency in the gap that separates the acoustic and optical bands of the phonon spectrum. We demonstrate the possibility of the existence of two-dimensional gap breathers by using a numerical method. Six types of two-dimensional gap breathers are obtained, i.e., symmetric, mirror-symmetric and asymmetric, whether the center of the breather is on a light or a heavy atom. The difference between one-dimensional discrete gap breathers and two-dimensional discrete gap breathers is also discussed. We use Aubry＇s theory to analyze the stability of discrete gap breathers in the two-dimensional diatomic face-centered square lattice.
基金supported by the National Key Research and Development Program of China(Grant No.2023YFC2907600)the National Natural Science Foundation of China(Grant Nos.42277174 and 52204260).
文摘The rock mass consists of rock blocks and structural planes,which can reduce its integrity and strength.Therefore,accurately obtaining the characteristics of the rock mass structural plane is a prerequisite for evaluating stability and designing supports in underground engineering.Currently,there are no effective testing methods for the characteristic parameters of the rock mass structural plane in underground engineering.The paper presents the digital drilling technology as a new testing method of rock mass structural planes.Flawed rock specimens with cracks of varying widths and angles were used to simulate the rock mass structural planes,and the multifunctional rock mass digital drilling test system was employed to carry out the digital drilling tests.The analysis focuses on the variation laws of drilling parameters,such as drilling pressure and drilling torque,affected by the characteristics of prefabricated cracks,and clarifies the degradation mechanism of rock equivalent compressive strength.Additionally,an identification model for the characteristic parameters of rock mass structural planes during drilling is established.The test results indicate that the average difference of the characteristics of prefabricated cracks identified by the equivalent compressive strength is 2.45°and 0.82 mm,respectively.The identification model while drilling is verified to be correct due to the high identification accuracy.Based on this,a method for testing the characteristic parameters of the surrounding rock structural plane while drilling is proposed.The research offers a theoretical and methodological foundation for precise in situ identification of structural planes of the surrounding rock in underground engineering.
基金the National Natural Science Foundation of China (Grant No.50179002)Liaoning Province Dr. Fund Opening Foundation of China.
文摘Study on failure of soft stratum of roller compacted concrete (RCC) is an important aspect of stability of high RCC dam. Six kinds of specimens with different interfaces were investigated by wedge splitting method. Double-K fracture parameters (initial fracture parameter and unsteady fracture parameter) were calculated by the concrete double-K fracture theory. It is indicated that the approach of construction joint or old joint after RCC final set is the most efficient among the six cases, and its fracture parameter is the largest among them. Its propagation path is sinuous. Its failure surface is scraggly. Bedding plane crack fails at the underside of the concrete surface, bond course or the surface between them for each approach. So disturbance on the underside of the concrete surface should be avoided or decreased at best during RCC construction.
文摘Verifiable secret sharing is a special kind of secret sharing. In this paper, A secure and efficient threshold secret sharing scheme is proposed by using the plane parametric curve on the basis of the principle of secret sharing. And the performance of this threshold scheme is analyzed. The results reveal that the threshold scheme has its own advantage of one-parameter representation for a master key, and it is a perfect ideal secret sharing scheme. It can easily detect cheaters by single operation in the participants so that the probability of valid cheating is less than 1/p (where p is a large prime).
基金Project supported by the Special Grade of the Financial Support from the China Postdoctoral Science Foundation(Grant No.2016T90455)the China Postdoctoral Science Foundation(Grant No.2015M581790)the Chinese Jiangsu Planned Projects for Postdoctoral Research Funds,China(Grant No.1501016A)
文摘Recently, Zhang et al. （Chin. Phys. B 26 024208 （2017）） investigated the band gap structures and semi-Dirac point of two-dimensional function photonic crystals, and the equations for the plane wave expansion method were induced to obtain the band structures. That report shows the band diagrams with the effects of function coefficient k and medium column ra under TE and TM waves. The proposed results look correct at first glance, but the authors made some mistakes in their report. Thus, the calculated results in their paper are incorrect. According to our calculations, the errors in their report are corrected, and the correct band structures also are presented in this paper.
文摘We study the two-dimensional above-barrier penetration and the sub-barrier tunneling of non-relativistic particles and photons, described in the quasi-monochromatic approximation by simple plane waves. Our scheme represents the motion from the left free-motion zero-potential region to the right zero-potential region through the intermediate region with a one-dimensional rectangular potential barrier along the axis, normal to the both parallel interfaces between all three regions, and with the zero potential along the axis, parallel to the those interfaces. We have firstly obtained the analytical expressions for the infinite series of multiple internal and external reflections and also of multiple transmitted waves of particles and photons, with equal shifts between them along the interfaces for the above-barrier penetration and with various shifts between them in the case of the sub-barrier tunneling. Finally the Hartman and Fletcher effect for any transmitted wave is established.
文摘Objective: To research the clinical application of two-dimensional speckle tracking imaging (2D-STI) in quantitative assessment of left ventricular function in patients with obstructive sleep apnea-hypopnea syndrome (OSAS). Method: From July 2016 to December 2018, 86 patients with OSAS were selected as OSAS group. According to sleep apnea hypopnea index (AHI), they were divided into mild OSAS group (24 cases), moderate OSAS group (29 cases) and severe OSAS group (33 cases). Another 50 healthy volunteers who underwent physical examination in our hospital during the same period were selected as the control group. The left ventricular function of all patients was quantitatively assessed by 2D-STI. The left ventricular function of all patients was quantitatively assessed by 2D-STI. The results of routine echocardiography and left ventricular global strain parameters of the OSAS group, the control group and the OSAS patients with different severity were compared and analyzed. Result: There were no significant differences in the levels of left ventricular ejection fraction (LVEF), left ventricular end diastolic diameter (LVEDd), left ventricular end systolic diameter (LVESd) between the two groups and OSAS patients with different severity (P>0.05). The levels of IVST, LVPW and LVMI in the OSAS group were significantly higher than those in the control group, the levels of end-diastolic interventricular septal thickness (IVS), left ventricular posterior wall thickness (LVPW), left ventricular mass index (LVMI) in the severe OSAS group were significantly higher than those in the mild and moderate OSAS group, and the levels of IVST, LVPW and LVMI in the moderate OSAS group were significantly higher than those in the mild OSAS group, there were significant differences between groups (P<0.05). The levels of GLS, GRS and GCS in the OSAS group were significantly lower than those in the control group (P<0.05). GLS, GRS and GCS levels in the severe OSAS group were significantly lower than those in the mild OSAS group and the moderate OSAS group, while the levels of global longitudinal strain (GLS), global radial strain (GRS) and global circumferential strain (GCS) in the moderate OSAS group were significantly lower than those in the mild OSAS group (P<0.05). Conclusion: The left ventricular systolic function of OSAS patients is obviously impaired. Left ventricular function in OSAS patients can be assessed timely and accurately by two-dimensional speckle tracking imaging.
文摘Recent installation of an array of broad band seismological stations in Morocco allowed us to study the records of five recent (2005-2008) moderate earthquakes (4.1 ≤ M ≤ 5.1) in order to determine their source parameters (seismic moment, fault slip, rupture area and stress drop) from P-wave spectra. We also studied the older Rissani events of 1992 using teleseismic data. Values of Mo, r, Δu and Δσ are, respectively, 1.1 × 1013 - 6 × 1016 Nm;0.50 - 3.9 km;0.8 - 5.8 cm and 0.3 - 1.49 MPa. The results are in accordance with the seismotectonic and geodynamic setting of Morocco as, for instance, the amount of slip along the faults with respect to the relative displacement of Nubia to Iberia (~4 mm·yr-1) determined from GPS data, taking into account the period of stress accumulation. However, some events show very variable corner frequency and low-frequency amplitude values which lead to considerably higher stress drop and fault slip values, especially at the nearest stations, which may reflect some site effects or uncertainties on depth and take-off angles.
