A 3D mathematical model was established to investigate the gas-liquid two-phase flow in Ruhrstahl-Heraeus(RH)vacuum refining process.The flow characteristics of molten steel were calculated using the coupled standard...A 3D mathematical model was established to investigate the gas-liquid two-phase flow in Ruhrstahl-Heraeus(RH)vacuum refining process.The flow characteristics of molten steel were calculated using the coupled standard k-εmodel and volume of fluid model.The bubble distribution was tracked by discrete phase model.Electromagnetic field was applied in the up-leg snorkel to enhance the effect of vacuum refining.The effect of swirling flow nozzles combined with electromagnetic stirring(EMS)on the flow characteristics of molten steel and bubble distribution was analyzed.The erosion of the up-leg snorkel was compared.The results show that when the swirling flow nozzles are used,the bubbles exhibit a distinct adherent rising behavior,and the refining efficiency decreases.In addition,the electromagnetic field can significantly improve the refining efficiency,but it brings stronger erosion to the up-leg snorkel.Nevertheless,when using the swirling flow nozzles combined with EMS,the refining performance is further optimized,and the erosion of the up-leg snorkel is also reduced due to its characteristic of bubble distribution.Compared to conventional nozzles,the mixing time was shortened by 16.2%,the recirculation rate increased by 12.5%.and the swirling intensity was strengthened by 8.9%.展开更多
Shock waves in the nozzle during supersonic separation under different conditions can disrupt the flow field’s thermodynamic equilibrium.While it contributes to the recovery of pressure energy,it also leads to the di...Shock waves in the nozzle during supersonic separation under different conditions can disrupt the flow field’s thermodynamic equilibrium.While it contributes to the recovery of pressure energy,it also leads to the dissipation of mechanical energy.This study aimed to investigate the effects of changes in back pressure on the shock wave position and its subsequent impact on the refrigeration performance of nozzles.A mathematical model for the supersonic gas in a nozzle was established and evaluated via experiments.The results show that when the back pressure is less than 0.2 MPa,no shock wave is generated in the nozzle,and high refrigeration and liquefaction efficiency can be ensured while effective pressure recovery is achieved.When the back pressure(pb)is increased from 0.3 to 0.6 MPa,the refrigeration efficiency of the nozzle decreases,and the shock wave position(x shock)is advanced from 157 to 118 mm.The maximum Mach number(Ma)that can be reached by the fluid in the nozzle is reduced from 1.97 to 1.27.When the back pressure is increased from 0.2 to 0.6 MPa,the minimum temperature is increased by 55.18 K.When the back pressure is greater than 0.3 MPa,the Mach number upstream of the shock wave is reduced from 1.97 to 1.27,the shock wave intensity is weakened,and the thickness of the boundary layer separation caused by the shock wave is also decreased accordingly.Therefore,to ensure refrigeration efficiency,measures should be taken to control the back pressure within a reasonable range.展开更多
As emerging two-dimensional(2D)materials,carbides and nitrides(MXenes)could be solid solutions or organized structures made up of multi-atomic layers.With remarkable and adjustable electrical,optical,mechanical,and el...As emerging two-dimensional(2D)materials,carbides and nitrides(MXenes)could be solid solutions or organized structures made up of multi-atomic layers.With remarkable and adjustable electrical,optical,mechanical,and electrochemical characteristics,MXenes have shown great potential in brain-inspired neuromorphic computing electronics,including neuromorphic gas sensors,pressure sensors and photodetectors.This paper provides a forward-looking review of the research progress regarding MXenes in the neuromorphic sensing domain and discussed the critical challenges that need to be resolved.Key bottlenecks such as insufficient long-term stability under environmental exposure,high costs,scalability limitations in large-scale production,and mechanical mismatch in wearable integration hinder their practical deployment.Furthermore,unresolved issues like interfacial compatibility in heterostructures and energy inefficiency in neu-romorphic signal conversion demand urgent attention.The review offers insights into future research directions enhance the fundamental understanding of MXene properties and promote further integration into neuromorphic computing applications through the convergence with various emerging technologies.展开更多
Two-dimensional(2D)multilayer kagome materials hold significant research value for regulating kagome-related physical properties and exploring quantum effects.However,their development is hindered by the scarcity of a...Two-dimensional(2D)multilayer kagome materials hold significant research value for regulating kagome-related physical properties and exploring quantum effects.However,their development is hindered by the scarcity of available material systems,making the identification of novel 2D multilayer kagome candidates particularly important.In this work,three types of 2D materials with trilayer kagome lattices,namely Sc_(6)S_(5)X_(6)(X=Cl,Br,I),are predicted based on first-principles calculations.These 2D materials feature two kagome lattices composed of Sc atoms and one kagome lattice composed of S atoms.Stability analysis indicates that these materials can exist as free-standing 2D materials.Electronic structure calculations reveal that Sc_(6)S_(5)X_(6)are narrow-bandgap semiconductors(0.76–0.95 e V),with their band structures exhibiting flat bands contributed by Sc-based kagome lattices and Dirac band gaps resulting from symmetry breaking.The sulfur-based kagome lattice in the central layer contributes an independent flat band below the Fermi level.Additionally,Sc_(6)S_(5)X_(6)exhibit high carrier mobility,with hole and electron mobilities reaching up to 10^(3)cm^(2)·V^(-1)·s^(-1),indicating potential applications in low-dimensional electronic devices.This work provides an excellent example for the development of novel multilayer 2D kagome materials.展开更多
Unmanned combat aerial vehicles require lightweight,stealth-capable exhaust systems.However,traditional metallic nozzles increase radar detectability and reduce range,while advanced composites offer high performance b...Unmanned combat aerial vehicles require lightweight,stealth-capable exhaust systems.However,traditional metallic nozzles increase radar detectability and reduce range,while advanced composites offer high performance but are expensive.Therefore,to improve the operational range and survivability of unmanned combat aerial vehicles,a lightweight,high-temperature-resistant,oxidation-resistant,and low-observable composite exhaust nozzle is developed to replace conventional metallic straight-type nozzles.The nozzle features a double serpentine shape to reduce radar and infrared signatures and is manufactured as a monolithic structure using the filament winding process,accommodating the complex geometry and large size(length:1.8 m,width:0.8 m).The exhaust nozzle consists of a ceramic matrix composite made of silicon carbide fibers and a silicon oxycarbide matrix,which absorbs and scatters radio frequency signals while withstanding prolonged exposure to high-temperature(700℃)oxidizing environments typical of engine exhaust gases.The polysiloxane resin used to produce the silicon oxycarbide matrix poses significant challenges owing to its low tackiness and high viscosity variations depending on the presence of nanoparticles,making filament winding difficult.These challenges are addressed by optimizing resin viscosity and winding pattern design.As a result,the tensile strength of the composite specimens fabricated with the optimized viscosity increases by 228.03% before pyrolysis and 97.68%after pyrolysis,compared with that of the non-optimized specimens.In addition,the density and tensile strength of the composite processed via three cycles of polymer infiltration and pyrolysis increased by 13.08% and 80.37%,respectively,compared to those of the non-densified composite.High-temperature oxidation and flame tests demonstrate exceptional thermal and oxidative stability.Furthermore,when compared with carbon fiber-reinforced ceramic matrix composites,the developed composite exhibits a permittivity at least two levels lower and a reflection loss below7 dB within the frequency range of 9.3-10.9 GHz,underscoring its superior electromagnetic stealth performance.展开更多
As a core functional refractory in the continuous casting process,the service reliability of the submerged entry nozzle(SEN)is directly related to the stability of continuous casting production,the quality of casting ...As a core functional refractory in the continuous casting process,the service reliability of the submerged entry nozzle(SEN)is directly related to the stability of continuous casting production,the quality of casting billets,and production efficiency.Al_(2)O_(3) inclusions clogging constitutes the predominant failure mode of SEN,particularly during continuous casting of high-grade steels.Although several studies in the literature have demonstrated that electric field application can mitigate SEN clogging to some extent,the underlying mechanism remains poorly understood,which hinders its widespread acceptance and practical implementation.The mechanism of preventing SEN clogging by applying a positive electric field was studied,and experimental verification was conducted on it in a certain steel plant.The results indicate that Al_(2)O_(3) inclusions exhibit a positive charge in molten steel under high-temperature(~1600℃)and low-oxygen-partial-pressure(≤20×10-6)conditions.In the continuous casting process at a Chinese steel plant,applying a positive electric field to the SEN effectively suppressed the migration of Al_(2)O_(3) inclusions toward the SEN wall,significantly enhancing its clogging resistance.展开更多
When the stagnation temperature of a perfect gas increases, the specific heat ratio does not remain constant any more, and start to vary with this temperature. The gas remains perfect, its state equation remains alway...When the stagnation temperature of a perfect gas increases, the specific heat ratio does not remain constant any more, and start to vary with this temperature. The gas remains perfect, its state equation remains always valid, except it will name in more calorically imperfect gas or gas at High Temperature. The goal of this work is to trace the profiles of the supersonic Minimum Length Nozzle with centered expansion when the stagnation temperature is taken into account, lower than the threshold of dissociation of the molecules and to have for each exit Mach number several nozzles shapes by changing the value of the temperature. The method of characteristics is used with a new form of the Prandtl Meyer function at high temperature. The resolution of the obtained equations is done by the second order of fmite differences method by using the predictor corrector algorithm. A study on the error given by the perfect gas model compared to our model is presented. The comparison is made with a calorically perfect gas for goal to give a limit of application of this model. The application is for the air.展开更多
When the stagnation temperature of a perfect gas increases, the specific heats and their ratio do not remain constant any more and start to vary with this temperature. The gas remains perfect, its state equation remai...When the stagnation temperature of a perfect gas increases, the specific heats and their ratio do not remain constant any more and start to vary with this temperature. The gas remains perfect, its state equation remains always valid, except it will name in more calorically imperfect gas or gas at High Temperature. The goal of this research is to trace the profiles of the supersonic plug nozzle when this stagnation temperature is taken into account, lower than the threshold of dissociation of the molecules, by using the new formula of the Prandtl Meyer function, and to have for each exit Mach number, several nozzles shapes by changing the value of this temperature. A study on the error given by the PG （perfect gas） model compared to our model at high temperature is presented. The comparison is made with the case of a calorically perfect gas aiming to give a limit of application of this model. The application is for the air.展开更多
The reaction of carbon-free oxide-based(corundum,spinel,zirconia,and mullite)submerged entry nozzle(SEN)lining with rare earth inclusions and its anti-clogging effects under near working conditions were systematically...The reaction of carbon-free oxide-based(corundum,spinel,zirconia,and mullite)submerged entry nozzle(SEN)lining with rare earth inclusions and its anti-clogging effects under near working conditions were systematically studied.A variety of lining composite test methods were innovatively used to ensure the consistency of test conditions.The experimental results showed that the mullite(acidic oxide)has strong reactivity with rare earth inclusions,and the spinel(basic oxide)has stable chemical properties and weak reactivity with rare earth inclusions.Because alumina is one of the main reactants of clogging formation,corundum is not suitable for SEN lining.There are less clogs on the surface of zirconia,but it will be exsoluted and unstable.Therefore,solving the problem of zirconia exsolution will greatly strengthen its application in SEN lining.展开更多
Non-metallic inclusions in steel are a significant challenge,affecting material properties and leading to issues such as stress concentration,cracking,and accelerated corrosion.Current methods for removing inclusions,...Non-metallic inclusions in steel are a significant challenge,affecting material properties and leading to issues such as stress concentration,cracking,and accelerated corrosion.Current methods for removing inclusions,including bubble,electromagnetic stirring,filtration separation,fluid flow,and sedimentation,often struggle with the removal of fine inclusions.Apart from these known methods,pulsed electric current(PEC),as an emerging technology,has demonstrated immense potential and environmental advantages.PEC offers adjustable current parameters and simple equipment,making it an attractive alternative to traditional methods.Its green energy-saving features and excellent results in regulating inclusion morphology and migration,as well as inhibiting submerged entry nozzle(SEN)clogging,make it a promising technology.In comparison to continuous current technology,PEC has shown significant advantages in regulating inclusions,not only improving purification efficiency but also demonstrating outstanding performance in flow stability and energy consumption.The ability of PEC to efficiently reduce inclusion numbers enhances the purity and quality of molten steel,improving its mechanical properties.Currently,the theoretical basis for controlling the movement of inclusions by current is mainly composed of three major theories:the double electric layer theory,electromagnetic force reverse separation theory,and electric free energy drive theory.These theories together form an important framework for researchers to understand and optimize the behavior of impurity movement controlled by electric current.Looking ahead,PEC is expected to pave the way for new solutions in directional regulation of inclusion migration,efficient inclusion removal,SEN clogging prevention,and the purification of molten steel.展开更多
The characteristics of flow and thrust evolution of an annular Expansion-Deflection(ED)nozzle are numerically investigated under varying backpressure changing rates during ascending and descending trajectories.The obj...The characteristics of flow and thrust evolution of an annular Expansion-Deflection(ED)nozzle are numerically investigated under varying backpressure changing rates during ascending and descending trajectories.The objective is to test the sensitivity of unsteady behaviors of shock waves in the ED nozzle to backpressure changing rate,and to further elucidate the thrust evolution mechanism and mode transition hysteresis.The movement of shock reflection points on the nozzle wall follows two flow mechanisms,namely,shock self-excited oscillations and rapid backpressure changes.A low backpressure changing rate enables shock self-excited oscillations,leading to a reciprocating motion of the shock waves accompanied by thrust oscillations,while a high backpressure changing rate suppresses the shock self-excited oscillations,leading to a unidirectional motion of the wave system on the nozzle shroud wall.A criterion for distinguishing ED nozzle operation modes is proposed,which relies on the loading inflection points of the nozzle pintle base and exhibits a fast and user-friendly feature.A dual-wake mode hysteresis region is defined to quantify the hysteresis in nozzle mode transition,with the span of the region decreasing as the backpressure changing rate slows down.The present work helps in understanding the unsteady flow mechanism and thrust evolution in ED nozzles.展开更多
Ultra-precision components have been widely used to produce advanced optoelectronic equipment.The so-called Electric field enhanced UltraViolet-Induced Jet Machining(EUV-INCJM)is an ultra-precision method that can ach...Ultra-precision components have been widely used to produce advanced optoelectronic equipment.The so-called Electric field enhanced UltraViolet-Induced Jet Machining(EUV-INCJM)is an ultra-precision method that can achieve sub-nanometer level surface quality polishing.This study focuses on the application of the EUV-INCJM with different nozzle structures to a single-crystal of silicon.Two kinds of electro-optic-liquid coupling nozzles with single-jet and multi-jet focusing structures are proposed accordingly.Simulations and experiments have been conducted to verify the material removal performance of these nozzles.The simulation results show that,under the same condition,the flow velocity of the single-jet nozzle is 1.05 times higher than that achieved with the multi-jet configuration,while the current density of the latter is 1.63 times higher than that of the single-jet nozzle.For the single-crystal silicon,the material removal efficiency of the multi-jet focusing nozzle exceeds by about 1.4 times that of the single-jet.These results confirm that the material removal ability of the multi-jet configuration is more suitable for ultra-smooth surface polishing.The surface roughness of Si workpiece was reduced from Rq 1.55 to Rq 0.816 nm with valleys and peaks on its surface being almost completely removed.展开更多
The proliferation of wearable biodevices has boosted the development of soft,innovative,and multifunctional materials for human health monitoring.The integration of wearable sensors with intelligent systems is an over...The proliferation of wearable biodevices has boosted the development of soft,innovative,and multifunctional materials for human health monitoring.The integration of wearable sensors with intelligent systems is an overwhelming tendency,providing powerful tools for remote health monitoring and personal health management.Among many candidates,two-dimensional(2D)materials stand out due to several exotic mechanical,electrical,optical,and chemical properties that can be efficiently integrated into atomic-thin films.While previous reviews on 2D materials for biodevices primarily focus on conventional configurations and materials like graphene,the rapid development of new 2D materials with exotic properties has opened up novel applications,particularly in smart interaction and integrated functionalities.This review aims to consolidate recent progress,highlight the unique advantages of 2D materials,and guide future research by discussing existing challenges and opportunities in applying 2D materials for smart wearable biodevices.We begin with an in-depth analysis of the advantages,sensing mechanisms,and potential applications of 2D materials in wearable biodevice fabrication.Following this,we systematically discuss state-of-the-art biodevices based on 2D materials for monitoring various physiological signals within the human body.Special attention is given to showcasing the integration of multi-functionality in 2D smart devices,mainly including self-power supply,integrated diagnosis/treatment,and human–machine interaction.Finally,the review concludes with a concise summary of existing challenges and prospective solutions concerning the utilization of2D materials for advanced biodevices.展开更多
The surface transfer doping model has been extensively adopted as a mechanism to account for the generation of hole accumulation layers below hydrogen-terminated diamond(H-diamond)surfaces.To achieve effective surface...The surface transfer doping model has been extensively adopted as a mechanism to account for the generation of hole accumulation layers below hydrogen-terminated diamond(H-diamond)surfaces.To achieve effective surface transfer doping,surface electron acceptor materials with high electron affinity(EA)are required to produce a high density of two-dimensional hole gas(2DHG)on the H-diamond subsurface.We have established ingenious theoretical models to demonstrate that even if these solid materials do not have a high EA value,they remain capable of absorbing electrons from the H-diamond surface by forming a negatively charged interface to act as a surface electron acceptor in the surface transfer doping model.Our calculations,particularly for the local density of states,provide compelling evidence that the effect of an interface with negative charges induces an upward band bending on the H-diamond side.Furthermore,the valence band maximum of the diamond atoms at the interface crosses the Fermi level,giving rise to strong surface transfer p-type doping.These results give a strong theoretical interpretation of the origin of 2DHG on H-diamond surfaces.The proposed guidelines contribute to further improvements in the performance of 2DHG H-diamond field effect transistors.展开更多
A functional interlayer based on two-dimensional(2D)porous modified vermiculite nanosheets(PVS)was obtained by acid-etching vermiculite nanosheets.The as-obtained 2D porous nanosheets exhibited a high specific surface...A functional interlayer based on two-dimensional(2D)porous modified vermiculite nanosheets(PVS)was obtained by acid-etching vermiculite nanosheets.The as-obtained 2D porous nanosheets exhibited a high specific surface area of 427 m^(2)·g^(-1)and rich surface active sites,which help restrain polysulfides(LiPSs)through good physi-cal and chemical adsorption,while simultaneously accelerating the nucleation and dissolution kinetics of Li_(2)S,effec-tively suppressing the shuttle effect.The assembled lithium-sulfur batteries(LSBs)employing the PVS-based inter-layer delivered a high initial discharge capacity of 1386 mAh·g^(-1)at 0.1C(167.5 mAh·g^(-1)),long-term cycling stabil-ity,and good rate property.展开更多
This paper mainly studies the well-posedness of steady incompressible impinging jet flow problem through a 3D axisymmetric finitely long nozzle.This problem originates from the physical phenomena encountered in practi...This paper mainly studies the well-posedness of steady incompressible impinging jet flow problem through a 3D axisymmetric finitely long nozzle.This problem originates from the physical phenomena encountered in practical engineering fields,such as in short take-off and vertical landing(STOVL)aircraft.Nowadays many intricate phenomena associated with impinging jet flows remain inadequately elucidated,which limits the ability to optimize aircraft design.Given a boundary condition in the inlet,the impinging jet problem is transformed into a Bernoulli-type free boundary problem according to the stream function.Then the variational method is used to study the corresponding variational problem with one parameter,thereby the wellposedness is established.The main conclusion is as follows.For a 3D axisymmetric finitely long nozzle and an infinitely long vertical wall,given an axial velocity in the inlet of nozzle,there exists a unique smooth incom‑pressible impinging jet flow such that the free boundary initiates smoothly at the endpoint of the nozzle and extends to infinity along the vertical wall at far fields.The key point is to investigate the regularity of the corner where the nozzle and the vertical axis intersect.展开更多
This paper investigates ruin,capital injection,and dividends for a two-dimensional risk model.The model posits that surplus levels of insurance companies are governed by a perturbed composite Poisson risk model.This m...This paper investigates ruin,capital injection,and dividends for a two-dimensional risk model.The model posits that surplus levels of insurance companies are governed by a perturbed composite Poisson risk model.This model introduces a dependence between the two surplus levels,present in both the associated perturbations and the claims resulting from common shocks.Critical levels of capital injection and dividends are established for each of the two risks.The surplus levels are observed discretely at fixed intervals,guiding decisions on capital injection,dividends,and ruin at these junctures.This study employs a two-dimensional Fourier cosine series expansion method to approximate the finite time expected discounted operating cost until ruin.The ensuing approximation error is also quantified.The validity and accuracy of the method are corroborated through numerical examples.Furthermore,the research delves into the optimal capital allocation problem.展开更多
Hydraulic sandblasting perforation plays a crucial role in the fracturing and reconstruction of unconventional oil and gas reservoirs.The jet nozzle is an essential part of the hydraulic perforation tool.Insufficient ...Hydraulic sandblasting perforation plays a crucial role in the fracturing and reconstruction of unconventional oil and gas reservoirs.The jet nozzle is an essential part of the hydraulic perforation tool.Insufficient penetration depth,caused by excessive jet distances,presents challenges during the perforation process.To overcome this,an optimization design of the nozzle structure is required to enhance the perforation efficiency.In this paper,a computational fluid-dynamic model for conical-cylindrical nozzles has been elaborated.To further improve the rock-breaking efficiency of the jet nozzle,a fillet design is introduced at the nozzle inlet section.The SST k-ωmodel is employed to account for turbulent flow effects in submerged conditions.The results indicate that the nozzle’s geometric parameters greatly influence the flow characteristics.The orthogonal experimental method is employed to optimize the flow channel structure of the nozzle,taking the length of constant velocity core as the evaluation index.The following optimized geometric parameters for the conical-cylindrical nozzle have been determined accordingly:a cylindrical segment diameter of 3.2 mm,a contraction angle of 12°,a contraction segment length of 8 mm,a cylindrical segment length of 6.4 mm,and a fillet radius of 2 mm.展开更多
Lithium-sulfur(Li-S)batteries with high energy density and capacity have garnered significant research attention among various energy storage devices.However,the shuttle effect of polysulfides(LiPSs)remains a major ch...Lithium-sulfur(Li-S)batteries with high energy density and capacity have garnered significant research attention among various energy storage devices.However,the shuttle effect of polysulfides(LiPSs)remains a major challenge for their practical application.The design of battery separators has become a key aspect in addressing the challenge.MXenes,a promising two-dimensional(2D)material,offer exceptional conductivity,large surface area,high mechanical strength,and active sites for surface reactions.When assembled into layered films,MXenes form highly tunable two-dimensional channels ranging from a few angstroms to over 1 nm.These nanoconfined channels are instrumental in facilitating lithium-ion transport while effectively impeding the shuttle effect of LiPSs,which are essential for improving the specific capacity and cyclic stability of Li-S batteries.Substantial progress has been made in developing MXenes-based separators for Li-S batteries,yet there remains a research gap in summarizing advancements from the perspective of interlayer engineering.This entails maintaining the 2D nanochannels of layered MXenes-based separators while modulating the physicochemical environment within the MXenes interlayers through targeted modifications.This review highlights advancements in in situ modification of MXenes and their integration with 0D,1D,and 2D materials to construct laminated nanocomposite separators for Li-S batteries.The future development directions of MXenes-based materials in Li-S energy storage devices are also outlined,to drive further advancements in MXenes for Li-S battery separators.展开更多
Electrohydrodynamic(EHD)jet printing represents a novel micro/nano-scale additive manufacturing process that utilises a high-voltage induced electric field between the nozzle and the substrate to print micro/nanoscale...Electrohydrodynamic(EHD)jet printing represents a novel micro/nano-scale additive manufacturing process that utilises a high-voltage induced electric field between the nozzle and the substrate to print micro/nanoscale structures.EHD printing is particularly advantageous for the fabrication on flexible or non-flat substrates and of large aspect ratio micro/nanostructures and composite multi-material structures.Despite this,EHD printing has yet to be fully industrialised due to its low throughput,which is primarily caused by the limitations of serial additive printing technology.The parallel multi-nozzle array-based process has become the most promising option for EHD printing to achieve large-scale printing by increasing the number of nozzles to realise multichannel parallel printing.This paper reviews the recent development of multi-nozzle EHD printing technology,analyses jet motion with multi-nozzle,explains the origins of the electric field crosstalk effect under multi-nozzle and discusses several widely used methods for overcoming it.This work also summarises the impact of different process parameters on multi-nozzle EHD printing and describes the current manufacturing process using multi-nozzle as well as the method by which they can be realised independently.In addition,it presents an additional significant utilisation of multi-nozzle printing aside from enhancing single-nozzle production efficiency,which is the production of composite phase change materials through multi-nozzle.Finally,the future direction of multi-nozzle EHD printing development is discussed and envisioned.展开更多
基金support from the National Natural Science Foundation of China(No.52174305).
文摘A 3D mathematical model was established to investigate the gas-liquid two-phase flow in Ruhrstahl-Heraeus(RH)vacuum refining process.The flow characteristics of molten steel were calculated using the coupled standard k-εmodel and volume of fluid model.The bubble distribution was tracked by discrete phase model.Electromagnetic field was applied in the up-leg snorkel to enhance the effect of vacuum refining.The effect of swirling flow nozzles combined with electromagnetic stirring(EMS)on the flow characteristics of molten steel and bubble distribution was analyzed.The erosion of the up-leg snorkel was compared.The results show that when the swirling flow nozzles are used,the bubbles exhibit a distinct adherent rising behavior,and the refining efficiency decreases.In addition,the electromagnetic field can significantly improve the refining efficiency,but it brings stronger erosion to the up-leg snorkel.Nevertheless,when using the swirling flow nozzles combined with EMS,the refining performance is further optimized,and the erosion of the up-leg snorkel is also reduced due to its characteristic of bubble distribution.Compared to conventional nozzles,the mixing time was shortened by 16.2%,the recirculation rate increased by 12.5%.and the swirling intensity was strengthened by 8.9%.
基金supported by the National Science and Technology Major Project of China(2025ZD1406703)the Open Fund of Key Laboratory of Oil&Gas Equipment,Ministry of Education(Southwest Petroleum University)(Grant No.OGE20230206).
文摘Shock waves in the nozzle during supersonic separation under different conditions can disrupt the flow field’s thermodynamic equilibrium.While it contributes to the recovery of pressure energy,it also leads to the dissipation of mechanical energy.This study aimed to investigate the effects of changes in back pressure on the shock wave position and its subsequent impact on the refrigeration performance of nozzles.A mathematical model for the supersonic gas in a nozzle was established and evaluated via experiments.The results show that when the back pressure is less than 0.2 MPa,no shock wave is generated in the nozzle,and high refrigeration and liquefaction efficiency can be ensured while effective pressure recovery is achieved.When the back pressure(pb)is increased from 0.3 to 0.6 MPa,the refrigeration efficiency of the nozzle decreases,and the shock wave position(x shock)is advanced from 157 to 118 mm.The maximum Mach number(Ma)that can be reached by the fluid in the nozzle is reduced from 1.97 to 1.27.When the back pressure is increased from 0.2 to 0.6 MPa,the minimum temperature is increased by 55.18 K.When the back pressure is greater than 0.3 MPa,the Mach number upstream of the shock wave is reduced from 1.97 to 1.27,the shock wave intensity is weakened,and the thickness of the boundary layer separation caused by the shock wave is also decreased accordingly.Therefore,to ensure refrigeration efficiency,measures should be taken to control the back pressure within a reasonable range.
基金supported by the NSFC(12474071)Natural Science Foundation of Shandong Province(ZR2024YQ051,ZR2025QB50)+6 种基金Guangdong Basic and Applied Basic Research Foundation(2025A1515011191)the Shanghai Sailing Program(23YF1402200,23YF1402400)funded by Basic Research Program of Jiangsu(BK20240424)Open Research Fund of State Key Laboratory of Crystal Materials(KF2406)Taishan Scholar Foundation of Shandong Province(tsqn202408006,tsqn202507058)Young Talent of Lifting engineering for Science and Technology in Shandong,China(SDAST2024QTB002)the Qilu Young Scholar Program of Shandong University。
文摘As emerging two-dimensional(2D)materials,carbides and nitrides(MXenes)could be solid solutions or organized structures made up of multi-atomic layers.With remarkable and adjustable electrical,optical,mechanical,and electrochemical characteristics,MXenes have shown great potential in brain-inspired neuromorphic computing electronics,including neuromorphic gas sensors,pressure sensors and photodetectors.This paper provides a forward-looking review of the research progress regarding MXenes in the neuromorphic sensing domain and discussed the critical challenges that need to be resolved.Key bottlenecks such as insufficient long-term stability under environmental exposure,high costs,scalability limitations in large-scale production,and mechanical mismatch in wearable integration hinder their practical deployment.Furthermore,unresolved issues like interfacial compatibility in heterostructures and energy inefficiency in neu-romorphic signal conversion demand urgent attention.The review offers insights into future research directions enhance the fundamental understanding of MXene properties and promote further integration into neuromorphic computing applications through the convergence with various emerging technologies.
基金supported by the Fundamental Research Funds for the Central Universities(WUT:2024IVA052 and Grant No.104972025KFYjc0089)。
文摘Two-dimensional(2D)multilayer kagome materials hold significant research value for regulating kagome-related physical properties and exploring quantum effects.However,their development is hindered by the scarcity of available material systems,making the identification of novel 2D multilayer kagome candidates particularly important.In this work,three types of 2D materials with trilayer kagome lattices,namely Sc_(6)S_(5)X_(6)(X=Cl,Br,I),are predicted based on first-principles calculations.These 2D materials feature two kagome lattices composed of Sc atoms and one kagome lattice composed of S atoms.Stability analysis indicates that these materials can exist as free-standing 2D materials.Electronic structure calculations reveal that Sc_(6)S_(5)X_(6)are narrow-bandgap semiconductors(0.76–0.95 e V),with their band structures exhibiting flat bands contributed by Sc-based kagome lattices and Dirac band gaps resulting from symmetry breaking.The sulfur-based kagome lattice in the central layer contributes an independent flat band below the Fermi level.Additionally,Sc_(6)S_(5)X_(6)exhibit high carrier mobility,with hole and electron mobilities reaching up to 10^(3)cm^(2)·V^(-1)·s^(-1),indicating potential applications in low-dimensional electronic devices.This work provides an excellent example for the development of novel multilayer 2D kagome materials.
基金supported by the Agency for Defense Development Grant Funded by the Korean Government(Grant No.912822501).
文摘Unmanned combat aerial vehicles require lightweight,stealth-capable exhaust systems.However,traditional metallic nozzles increase radar detectability and reduce range,while advanced composites offer high performance but are expensive.Therefore,to improve the operational range and survivability of unmanned combat aerial vehicles,a lightweight,high-temperature-resistant,oxidation-resistant,and low-observable composite exhaust nozzle is developed to replace conventional metallic straight-type nozzles.The nozzle features a double serpentine shape to reduce radar and infrared signatures and is manufactured as a monolithic structure using the filament winding process,accommodating the complex geometry and large size(length:1.8 m,width:0.8 m).The exhaust nozzle consists of a ceramic matrix composite made of silicon carbide fibers and a silicon oxycarbide matrix,which absorbs and scatters radio frequency signals while withstanding prolonged exposure to high-temperature(700℃)oxidizing environments typical of engine exhaust gases.The polysiloxane resin used to produce the silicon oxycarbide matrix poses significant challenges owing to its low tackiness and high viscosity variations depending on the presence of nanoparticles,making filament winding difficult.These challenges are addressed by optimizing resin viscosity and winding pattern design.As a result,the tensile strength of the composite specimens fabricated with the optimized viscosity increases by 228.03% before pyrolysis and 97.68%after pyrolysis,compared with that of the non-optimized specimens.In addition,the density and tensile strength of the composite processed via three cycles of polymer infiltration and pyrolysis increased by 13.08% and 80.37%,respectively,compared to those of the non-densified composite.High-temperature oxidation and flame tests demonstrate exceptional thermal and oxidative stability.Furthermore,when compared with carbon fiber-reinforced ceramic matrix composites,the developed composite exhibits a permittivity at least two levels lower and a reflection loss below7 dB within the frequency range of 9.3-10.9 GHz,underscoring its superior electromagnetic stealth performance.
基金supported by the National Outstanding Youth Science Fund Project of National Natural Science Foundation of China(No.52302031)National Natural Science Foundation of China(No.51932008).
文摘As a core functional refractory in the continuous casting process,the service reliability of the submerged entry nozzle(SEN)is directly related to the stability of continuous casting production,the quality of casting billets,and production efficiency.Al_(2)O_(3) inclusions clogging constitutes the predominant failure mode of SEN,particularly during continuous casting of high-grade steels.Although several studies in the literature have demonstrated that electric field application can mitigate SEN clogging to some extent,the underlying mechanism remains poorly understood,which hinders its widespread acceptance and practical implementation.The mechanism of preventing SEN clogging by applying a positive electric field was studied,and experimental verification was conducted on it in a certain steel plant.The results indicate that Al_(2)O_(3) inclusions exhibit a positive charge in molten steel under high-temperature(~1600℃)and low-oxygen-partial-pressure(≤20×10-6)conditions.In the continuous casting process at a Chinese steel plant,applying a positive electric field to the SEN effectively suppressed the migration of Al_(2)O_(3) inclusions toward the SEN wall,significantly enhancing its clogging resistance.
文摘When the stagnation temperature of a perfect gas increases, the specific heat ratio does not remain constant any more, and start to vary with this temperature. The gas remains perfect, its state equation remains always valid, except it will name in more calorically imperfect gas or gas at High Temperature. The goal of this work is to trace the profiles of the supersonic Minimum Length Nozzle with centered expansion when the stagnation temperature is taken into account, lower than the threshold of dissociation of the molecules and to have for each exit Mach number several nozzles shapes by changing the value of the temperature. The method of characteristics is used with a new form of the Prandtl Meyer function at high temperature. The resolution of the obtained equations is done by the second order of fmite differences method by using the predictor corrector algorithm. A study on the error given by the perfect gas model compared to our model is presented. The comparison is made with a calorically perfect gas for goal to give a limit of application of this model. The application is for the air.
文摘When the stagnation temperature of a perfect gas increases, the specific heats and their ratio do not remain constant any more and start to vary with this temperature. The gas remains perfect, its state equation remains always valid, except it will name in more calorically imperfect gas or gas at High Temperature. The goal of this research is to trace the profiles of the supersonic plug nozzle when this stagnation temperature is taken into account, lower than the threshold of dissociation of the molecules, by using the new formula of the Prandtl Meyer function, and to have for each exit Mach number, several nozzles shapes by changing the value of this temperature. A study on the error given by the PG （perfect gas） model compared to our model at high temperature is presented. The comparison is made with the case of a calorically perfect gas aiming to give a limit of application of this model. The application is for the air.
基金supported by the National Outstanding Youth Science Fund Project of National Natural Science Foundation of China(52302031)National Natural Science Foundation of China(51932008 and 51772277)Central China Thousand Talents Project(204200510011).
文摘The reaction of carbon-free oxide-based(corundum,spinel,zirconia,and mullite)submerged entry nozzle(SEN)lining with rare earth inclusions and its anti-clogging effects under near working conditions were systematically studied.A variety of lining composite test methods were innovatively used to ensure the consistency of test conditions.The experimental results showed that the mullite(acidic oxide)has strong reactivity with rare earth inclusions,and the spinel(basic oxide)has stable chemical properties and weak reactivity with rare earth inclusions.Because alumina is one of the main reactants of clogging formation,corundum is not suitable for SEN lining.There are less clogs on the surface of zirconia,but it will be exsoluted and unstable.Therefore,solving the problem of zirconia exsolution will greatly strengthen its application in SEN lining.
基金supported by the Fundamental Research Funds for the Central Universities(No.FRF-BD-23-01).
文摘Non-metallic inclusions in steel are a significant challenge,affecting material properties and leading to issues such as stress concentration,cracking,and accelerated corrosion.Current methods for removing inclusions,including bubble,electromagnetic stirring,filtration separation,fluid flow,and sedimentation,often struggle with the removal of fine inclusions.Apart from these known methods,pulsed electric current(PEC),as an emerging technology,has demonstrated immense potential and environmental advantages.PEC offers adjustable current parameters and simple equipment,making it an attractive alternative to traditional methods.Its green energy-saving features and excellent results in regulating inclusion morphology and migration,as well as inhibiting submerged entry nozzle(SEN)clogging,make it a promising technology.In comparison to continuous current technology,PEC has shown significant advantages in regulating inclusions,not only improving purification efficiency but also demonstrating outstanding performance in flow stability and energy consumption.The ability of PEC to efficiently reduce inclusion numbers enhances the purity and quality of molten steel,improving its mechanical properties.Currently,the theoretical basis for controlling the movement of inclusions by current is mainly composed of three major theories:the double electric layer theory,electromagnetic force reverse separation theory,and electric free energy drive theory.These theories together form an important framework for researchers to understand and optimize the behavior of impurity movement controlled by electric current.Looking ahead,PEC is expected to pave the way for new solutions in directional regulation of inclusion migration,efficient inclusion removal,SEN clogging prevention,and the purification of molten steel.
基金the National Natural Science Foundation of China(No.12002102)。
文摘The characteristics of flow and thrust evolution of an annular Expansion-Deflection(ED)nozzle are numerically investigated under varying backpressure changing rates during ascending and descending trajectories.The objective is to test the sensitivity of unsteady behaviors of shock waves in the ED nozzle to backpressure changing rate,and to further elucidate the thrust evolution mechanism and mode transition hysteresis.The movement of shock reflection points on the nozzle wall follows two flow mechanisms,namely,shock self-excited oscillations and rapid backpressure changes.A low backpressure changing rate enables shock self-excited oscillations,leading to a reciprocating motion of the shock waves accompanied by thrust oscillations,while a high backpressure changing rate suppresses the shock self-excited oscillations,leading to a unidirectional motion of the wave system on the nozzle shroud wall.A criterion for distinguishing ED nozzle operation modes is proposed,which relies on the loading inflection points of the nozzle pintle base and exhibits a fast and user-friendly feature.A dual-wake mode hysteresis region is defined to quantify the hysteresis in nozzle mode transition,with the span of the region decreasing as the backpressure changing rate slows down.The present work helps in understanding the unsteady flow mechanism and thrust evolution in ED nozzles.
基金supported by the National Natural Science Foundation of China(52365056).
文摘Ultra-precision components have been widely used to produce advanced optoelectronic equipment.The so-called Electric field enhanced UltraViolet-Induced Jet Machining(EUV-INCJM)is an ultra-precision method that can achieve sub-nanometer level surface quality polishing.This study focuses on the application of the EUV-INCJM with different nozzle structures to a single-crystal of silicon.Two kinds of electro-optic-liquid coupling nozzles with single-jet and multi-jet focusing structures are proposed accordingly.Simulations and experiments have been conducted to verify the material removal performance of these nozzles.The simulation results show that,under the same condition,the flow velocity of the single-jet nozzle is 1.05 times higher than that achieved with the multi-jet configuration,while the current density of the latter is 1.63 times higher than that of the single-jet nozzle.For the single-crystal silicon,the material removal efficiency of the multi-jet focusing nozzle exceeds by about 1.4 times that of the single-jet.These results confirm that the material removal ability of the multi-jet configuration is more suitable for ultra-smooth surface polishing.The surface roughness of Si workpiece was reduced from Rq 1.55 to Rq 0.816 nm with valleys and peaks on its surface being almost completely removed.
基金the support from the National Natural Science Foundation of China(22272004,62272041)the Fundamental Research Funds for the Central Universities(YWF-22-L-1256)+1 种基金the National Key R&D Program of China(2023YFC3402600)the Beijing Institute of Technology Research Fund Program for Young Scholars(No.1870011182126)。
文摘The proliferation of wearable biodevices has boosted the development of soft,innovative,and multifunctional materials for human health monitoring.The integration of wearable sensors with intelligent systems is an overwhelming tendency,providing powerful tools for remote health monitoring and personal health management.Among many candidates,two-dimensional(2D)materials stand out due to several exotic mechanical,electrical,optical,and chemical properties that can be efficiently integrated into atomic-thin films.While previous reviews on 2D materials for biodevices primarily focus on conventional configurations and materials like graphene,the rapid development of new 2D materials with exotic properties has opened up novel applications,particularly in smart interaction and integrated functionalities.This review aims to consolidate recent progress,highlight the unique advantages of 2D materials,and guide future research by discussing existing challenges and opportunities in applying 2D materials for smart wearable biodevices.We begin with an in-depth analysis of the advantages,sensing mechanisms,and potential applications of 2D materials in wearable biodevice fabrication.Following this,we systematically discuss state-of-the-art biodevices based on 2D materials for monitoring various physiological signals within the human body.Special attention is given to showcasing the integration of multi-functionality in 2D smart devices,mainly including self-power supply,integrated diagnosis/treatment,and human–machine interaction.Finally,the review concludes with a concise summary of existing challenges and prospective solutions concerning the utilization of2D materials for advanced biodevices.
基金supported by the National Nat-ural Science Foundation of China(Nos.62174122,U2241244,and 52302046)Major Program(JD)of Hubei Province(No.2023BAA008)+2 种基金the Fundamental Research Funds for the Central Universities(Nos.2042023kf0116 and 2042023kf1041)the Guangdong Basic and Applied Basic Research Foundation(Nos.2024A1515011764 and 2024A1515010383)the Open Fund of Hubei Key Laboratory of Electronic Manufacturing and Packaging Integration(Wuhan University)(No.EMPI2023016).
文摘The surface transfer doping model has been extensively adopted as a mechanism to account for the generation of hole accumulation layers below hydrogen-terminated diamond(H-diamond)surfaces.To achieve effective surface transfer doping,surface electron acceptor materials with high electron affinity(EA)are required to produce a high density of two-dimensional hole gas(2DHG)on the H-diamond subsurface.We have established ingenious theoretical models to demonstrate that even if these solid materials do not have a high EA value,they remain capable of absorbing electrons from the H-diamond surface by forming a negatively charged interface to act as a surface electron acceptor in the surface transfer doping model.Our calculations,particularly for the local density of states,provide compelling evidence that the effect of an interface with negative charges induces an upward band bending on the H-diamond side.Furthermore,the valence band maximum of the diamond atoms at the interface crosses the Fermi level,giving rise to strong surface transfer p-type doping.These results give a strong theoretical interpretation of the origin of 2DHG on H-diamond surfaces.The proposed guidelines contribute to further improvements in the performance of 2DHG H-diamond field effect transistors.
文摘A functional interlayer based on two-dimensional(2D)porous modified vermiculite nanosheets(PVS)was obtained by acid-etching vermiculite nanosheets.The as-obtained 2D porous nanosheets exhibited a high specific surface area of 427 m^(2)·g^(-1)and rich surface active sites,which help restrain polysulfides(LiPSs)through good physi-cal and chemical adsorption,while simultaneously accelerating the nucleation and dissolution kinetics of Li_(2)S,effec-tively suppressing the shuttle effect.The assembled lithium-sulfur batteries(LSBs)employing the PVS-based inter-layer delivered a high initial discharge capacity of 1386 mAh·g^(-1)at 0.1C(167.5 mAh·g^(-1)),long-term cycling stabil-ity,and good rate property.
文摘This paper mainly studies the well-posedness of steady incompressible impinging jet flow problem through a 3D axisymmetric finitely long nozzle.This problem originates from the physical phenomena encountered in practical engineering fields,such as in short take-off and vertical landing(STOVL)aircraft.Nowadays many intricate phenomena associated with impinging jet flows remain inadequately elucidated,which limits the ability to optimize aircraft design.Given a boundary condition in the inlet,the impinging jet problem is transformed into a Bernoulli-type free boundary problem according to the stream function.Then the variational method is used to study the corresponding variational problem with one parameter,thereby the wellposedness is established.The main conclusion is as follows.For a 3D axisymmetric finitely long nozzle and an infinitely long vertical wall,given an axial velocity in the inlet of nozzle,there exists a unique smooth incom‑pressible impinging jet flow such that the free boundary initiates smoothly at the endpoint of the nozzle and extends to infinity along the vertical wall at far fields.The key point is to investigate the regularity of the corner where the nozzle and the vertical axis intersect.
基金supported by the Shihezi University High-Level Talents Research Startup Project(Project No.RCZK202521)the National Natural Science Foundation of China(Grant Nos.12271066,11871121,12171405)+1 种基金the Chongqing Natural Science Foundation Joint Fund for Innovation and Development Project(Project No.CSTB2024NSCQLZX0085)the Chongqing Normal University Foundation(Grant No.23XLB018).
文摘This paper investigates ruin,capital injection,and dividends for a two-dimensional risk model.The model posits that surplus levels of insurance companies are governed by a perturbed composite Poisson risk model.This model introduces a dependence between the two surplus levels,present in both the associated perturbations and the claims resulting from common shocks.Critical levels of capital injection and dividends are established for each of the two risks.The surplus levels are observed discretely at fixed intervals,guiding decisions on capital injection,dividends,and ruin at these junctures.This study employs a two-dimensional Fourier cosine series expansion method to approximate the finite time expected discounted operating cost until ruin.The ensuing approximation error is also quantified.The validity and accuracy of the method are corroborated through numerical examples.Furthermore,the research delves into the optimal capital allocation problem.
基金The authors gratefully acknowledge the financial support by the National Natural Science Foundation of China(No.52405272)the CNOOC’s major project during the 14th Five-Year Plan period“Key Technologies and Equipment for Measurement,Recording,and Testing-Development and Engineering of Integrated Perforation Technology Equipment Based on Reservoir Geology”and the National Science Foundation of Jiangsu Province(No.BK20220533).
文摘Hydraulic sandblasting perforation plays a crucial role in the fracturing and reconstruction of unconventional oil and gas reservoirs.The jet nozzle is an essential part of the hydraulic perforation tool.Insufficient penetration depth,caused by excessive jet distances,presents challenges during the perforation process.To overcome this,an optimization design of the nozzle structure is required to enhance the perforation efficiency.In this paper,a computational fluid-dynamic model for conical-cylindrical nozzles has been elaborated.To further improve the rock-breaking efficiency of the jet nozzle,a fillet design is introduced at the nozzle inlet section.The SST k-ωmodel is employed to account for turbulent flow effects in submerged conditions.The results indicate that the nozzle’s geometric parameters greatly influence the flow characteristics.The orthogonal experimental method is employed to optimize the flow channel structure of the nozzle,taking the length of constant velocity core as the evaluation index.The following optimized geometric parameters for the conical-cylindrical nozzle have been determined accordingly:a cylindrical segment diameter of 3.2 mm,a contraction angle of 12°,a contraction segment length of 8 mm,a cylindrical segment length of 6.4 mm,and a fillet radius of 2 mm.
基金supported by Beijing Natural Science Foundation(Nos.2232037 and 2242035)the National Natural Science Foundation of China(Nos.22005012,22105012 and 51803183)+1 种基金Chunhui Plan Cooperative Project of Ministry of Education(No.202201298)the China Postdoctoral Science Foundation Funded Project(No.2023M733520).
文摘Lithium-sulfur(Li-S)batteries with high energy density and capacity have garnered significant research attention among various energy storage devices.However,the shuttle effect of polysulfides(LiPSs)remains a major challenge for their practical application.The design of battery separators has become a key aspect in addressing the challenge.MXenes,a promising two-dimensional(2D)material,offer exceptional conductivity,large surface area,high mechanical strength,and active sites for surface reactions.When assembled into layered films,MXenes form highly tunable two-dimensional channels ranging from a few angstroms to over 1 nm.These nanoconfined channels are instrumental in facilitating lithium-ion transport while effectively impeding the shuttle effect of LiPSs,which are essential for improving the specific capacity and cyclic stability of Li-S batteries.Substantial progress has been made in developing MXenes-based separators for Li-S batteries,yet there remains a research gap in summarizing advancements from the perspective of interlayer engineering.This entails maintaining the 2D nanochannels of layered MXenes-based separators while modulating the physicochemical environment within the MXenes interlayers through targeted modifications.This review highlights advancements in in situ modification of MXenes and their integration with 0D,1D,and 2D materials to construct laminated nanocomposite separators for Li-S batteries.The future development directions of MXenes-based materials in Li-S energy storage devices are also outlined,to drive further advancements in MXenes for Li-S battery separators.
基金National Natural Science Foundation of China(Grant Nos.52275345,52175331)the Support plan for Outstanding Youth Innovation Team in Universities of Shandong Province,China(2021KJ044)Natural Science Foundation of Shandong Province,China(Granted No.ZR2020ZD04)。
文摘Electrohydrodynamic(EHD)jet printing represents a novel micro/nano-scale additive manufacturing process that utilises a high-voltage induced electric field between the nozzle and the substrate to print micro/nanoscale structures.EHD printing is particularly advantageous for the fabrication on flexible or non-flat substrates and of large aspect ratio micro/nanostructures and composite multi-material structures.Despite this,EHD printing has yet to be fully industrialised due to its low throughput,which is primarily caused by the limitations of serial additive printing technology.The parallel multi-nozzle array-based process has become the most promising option for EHD printing to achieve large-scale printing by increasing the number of nozzles to realise multichannel parallel printing.This paper reviews the recent development of multi-nozzle EHD printing technology,analyses jet motion with multi-nozzle,explains the origins of the electric field crosstalk effect under multi-nozzle and discusses several widely used methods for overcoming it.This work also summarises the impact of different process parameters on multi-nozzle EHD printing and describes the current manufacturing process using multi-nozzle as well as the method by which they can be realised independently.In addition,it presents an additional significant utilisation of multi-nozzle printing aside from enhancing single-nozzle production efficiency,which is the production of composite phase change materials through multi-nozzle.Finally,the future direction of multi-nozzle EHD printing development is discussed and envisioned.
