To investigate the damage evolution caused by stress-driven and sub-critical crack propagation within the Beishan granite under multi-creep triaxial compressive conditions,the distributed optical fiber sensing and X-r...To investigate the damage evolution caused by stress-driven and sub-critical crack propagation within the Beishan granite under multi-creep triaxial compressive conditions,the distributed optical fiber sensing and X-ray computed tomography were combined to obtain the strain distribution over the sample surface and internal fractures of the samples.The Gini and skewness(G-S)coefficients were used to quantify strain localization during tests,where the Gini coefficient reflects the degree of clustering of elements with high strain values,i.e.,strain localization/delocalization.The strain localization-induced asymmetry of data distribution is quantified by the skewness coefficient.A precursor to granite failure is defined by the rapid and simultaneous increase of the G-S coefficients,which are calculated from strain increment,giving an earlier warning of failure by about 8%peak stress than those from absolute strain values.Moreover,the process of damage accumulation due to stress-driven crack propagation in Beishan granite is different at various confining pressures as the stress exceeds the crack initiation stress.Concretely,strain localization is continuous until brittle failure at higher confining pressure,while both strain localization and delocalization occur at lower confining pressure.Despite the different stress conditions,a similar statistical characteristic of strain localization during the creep stage is observed.The Gini coefficient increases,and the skewness coefficient decreases slightly as the creep stress is below 95%peak stress.When the accelerated strain localization begins,the Gini and skewness coefficients increase rapidly and simultaneously.展开更多
It has been over a decade since the first coded aperture video compressive sensing(CS)system was reported.The underlying principle of this technology is to employ a high-frequency modulator in the optical path to modu...It has been over a decade since the first coded aperture video compressive sensing(CS)system was reported.The underlying principle of this technology is to employ a high-frequency modulator in the optical path to modulate a recorded high-speed scene within one integration time.The superimposed image captured in this manner is modulated and compressed,since multiple modulation patterns are imposed.Following this,reconstruction algorithms are utilized to recover the desired high-speed scene.One leading advantage of video CS is that a single captured measurement can be used to reconstruct a multi-frame video,thereby enabling a low-speed camera to capture high-speed scenes.Inspired by this,a number of variants of video CS systems have been built,mainly using different modulation devices.Meanwhile,in order to obtain high-quality reconstruction videos,many algorithms have been developed,from optimization-based iterative algorithms to deep-learning-based ones.Recently,emerging deep learning methods have been dominant due to their high-speed inference and high-quality reconstruction,highlighting the possibility of deploying video CS in practical applications.Toward this end,this paper reviews the progress that has been achieved in video CS during the past decade.We further analyze the efforts that need to be made—in terms of both hardware and algorithms—to enable real applications.Research gaps are put forward and future directions are summarized to help researchers and engineers working on this topic.展开更多
In the heterogeneous power internet of things(IoT)environment,data signals are acquired to support different business systems to realize advanced intelligent applications,with massive,multi-source,heterogeneous and ot...In the heterogeneous power internet of things(IoT)environment,data signals are acquired to support different business systems to realize advanced intelligent applications,with massive,multi-source,heterogeneous and other characteristics.Reliable perception of information and efficient transmission of energy in multi-source heterogeneous environments are crucial issues.Compressive sensing(CS),as an effective method of signal compression and transmission,can accurately recover the original signal only by very few sampling.In this paper,we study a new method of multi-source heterogeneous data signal reconstruction of power IoT based on compressive sensing technology.Based on the traditional compressive sensing technology to directly recover multi-source heterogeneous signals,we fully use the interference subspace information to design the measurement matrix,which directly and effectively eliminates the interference while making the measurement.The measure matrix is optimized by minimizing the average cross-coherence of the matrix,and the reconstruction performance of the new method is further improved.Finally,the effectiveness of the new method with different parameter settings under different multi-source heterogeneous data signal cases is verified by using orthogonal matching pursuit(OMP)and sparsity adaptive matching pursuit(SAMP)for considering the actual environment with prior information utilization of signal sparsity and no prior information utilization of signal sparsity.展开更多
Face hallucination or super-resolution is an inverse problem which is underdetermined,and the compressive sensing(CS)theory provides an effective way of seeking inverse problem solutions.In this paper,a novel compress...Face hallucination or super-resolution is an inverse problem which is underdetermined,and the compressive sensing(CS)theory provides an effective way of seeking inverse problem solutions.In this paper,a novel compressive sensing based face hallucination method is presented,which is comprised of three steps:dictionary learning、sparse coding and solving maximum a posteriori(MAP)formulation.In the first step,the K-SVD dictionary learning algorithm is adopted to obtain a dictionary which can sparsely represent high resolution(HR)face image patches.In the second step,we seek the sparsest representation for each low-resolution(LR)face image paches input using the learned dictionary,super resolution image blocks are obtained from the sparsest coefficients and dictionaries,which then are assembled into super-resolution(SR)image.Finally,MAP formulation is introduced to satisfy the consistency restrictive condition and obtain the higher quality HR images.The experimental results demonstrate that our approach can achieve better super-resolution faces compared with other state-of-the-art method.展开更多
In order to reduce the pilot number and improve spectral efficiency, recently emerged compressive sensing （CS） is applied to the digital broadcast channel estimation. According to the six channel profiles of the Eur...In order to reduce the pilot number and improve spectral efficiency, recently emerged compressive sensing （CS） is applied to the digital broadcast channel estimation. According to the six channel profiles of the European Telecommunication Standards Institute（ETSI） digital radio mondiale （DRM） standard, the subspace pursuit （SP） algorithm is employed for delay spread and attenuation estimation of each path in the case where the channel profile is identified and the multipath number is known. The stop condition for SP is that the sparsity of the estimation equals the multipath number. For the case where the multipath number is unknown, the orthogonal matching pursuit （OMP） algorithm is employed for channel estimation, while the stop condition is that the estimation achieves the noise variance. Simulation results show that with the same number of pilots, CS algorithms outperform the traditional cubic-spline-interpolation-based least squares （LS） channel estimation. SP is also demonstrated to be better than OMP when the multipath number is known as a priori.展开更多
This paper explores the recovery of block sparse signals in frame-based settings using the l_(2)/l_(q)-synthesis technique(0<q≤1).We propose a new null space property,referred to as block D-NSP_(q),which is based ...This paper explores the recovery of block sparse signals in frame-based settings using the l_(2)/l_(q)-synthesis technique(0<q≤1).We propose a new null space property,referred to as block D-NSP_(q),which is based on the dictionary D.We establish that matrices adhering to the block D-NSP_(q)condition are both necessary and sufficient for the exact recovery of block sparse signals via l_(2)/l_(q)-synthesis.Additionally,this condition is essential for the stable recovery of signals that are block-compressible with respect to D.This D-NSP_(q)property is identified as the first complete condition for successful signal recovery using l_(2)/l_(q)-synthesis.Furthermore,we assess the theoretical efficacy of the l2/lq-synthesis method under conditions of measurement noise.展开更多
In deep mineral exploration, the acquisition of audio magnetotelluric （AMT） data is severely affected by ambient noise near the observation sites; This near-field noise restricts investigation depths. Mathematical m...In deep mineral exploration, the acquisition of audio magnetotelluric （AMT） data is severely affected by ambient noise near the observation sites; This near-field noise restricts investigation depths. Mathematical morphological filtering （MMF） proved effective in suppressing large-scale strong and variably shaped noise, typically low-frequency noise, but can not deal with pulse noise of AMT data. We combine compressive sensing and MMF. First we use MMF to suppress the large-scale strong ambient noise; second, we use the improved orthogonal match pursuit （IOMP） algorithm to remove the residual pulse noise. To remove the noise and protect the useful AMT signal, a redundant dictionary that matches with spikes and is insensitive to the useful signal is designed. Synthetic and field data from the Luzong field suggest that the proposed method suppresses the near-source noise and preserves the signal well; thus, better results are obtained that improve the output of either MMF or IOMP.展开更多
This paper considers the fundamental channel estimation problem for the multiple-input multiple-output orthogonal frequency division multiplexing(MIMO-OFDM)system in the presence of multi-cell interference.Specificall...This paper considers the fundamental channel estimation problem for the multiple-input multiple-output orthogonal frequency division multiplexing(MIMO-OFDM)system in the presence of multi-cell interference.Specifically,this paper focuses on both channel modelling and receiver design for interference estimation and mitigation.We propose a delay-calibrated block-wise linear model,which extracts the delay of the dominant tap of each interference as a key parameter and approximates the residual channel coefficients by the recently developed blockwise linear model.Based on the delay-calibrated block-wise linear model and the angle-domain channel sparsity,we further conceive a message passing algorithm to solve the channel estimation problem.Numerical results demonstrate the superior performance of the proposed algorithm over the state-of-the-art algorithms.展开更多
Recent advances in AC/DC hybrid power distribution systems have enhanced convenience in daily life.However,DC distribution introduces significant power quality challenges.To address the identification and classificati...Recent advances in AC/DC hybrid power distribution systems have enhanced convenience in daily life.However,DC distribution introduces significant power quality challenges.To address the identification and classification of DC power quality disturbances,this paper proposes a novel methodology integrating Compressed Sensing(CS)with an enhanced Stacked Denoising Autoencoder(SDAE).The proposed approach first employs MATLAB/SIMULINK to model the DC distribution network and generate DC power quality disturbance signals.The measured original signals are then reconstructed using the compressive sensing-based generalized orthogonal matching pursuit(GOMP)algorithm to obtain sparse vectors as the final dataset.Subsequently,a Stacked Denoising Autoencoder model is constructed.The Root Mean Square Propagation(RMSprop)optimization algorithm is introduced to finetune network parameters,thereby reducing the probability of convergence to local optima.Finally,simulation analyses are conducted on five common types of DC power quality disturbance signals.Both raw signals and sparse vectors are utilized as datasets and fed into the encoder model.The results indicate that this method effectively reduces the feature dimensionality for DC power quality disturbance classification while improving both recognition efficiency and accuracy,with additional advantages in noise resistance.展开更多
For image compression sensing reconstruction,most algorithms use the method of reconstructing image blocks one by one and stacking many convolutional layers,which usually have defects of obvious block effects,high com...For image compression sensing reconstruction,most algorithms use the method of reconstructing image blocks one by one and stacking many convolutional layers,which usually have defects of obvious block effects,high computational complexity,and long reconstruction time.An image compressed sensing reconstruction network based on self-attention mechanism(SAMNet)was proposed.For the compressed sampling,self-attention convolution was designed,which was conducive to capturing richer features,so that the compressed sensing measurement value retained more image structure information.For the reconstruction,a self-attention mechanism was introduced in the convolutional neural network.A reconstruction network including residual blocks,bottleneck transformer(BoTNet),and dense blocks was proposed,which strengthened the transfer of image features and reduced the amount of parameters dramatically.Under the Set5 dataset,when the measurement rates are 0.01,0.04,0.10,and 0.25,the average peak signal-to-noise ratio(PSNR)of SAMNet is improved by 1.27,1.23,0.50,and 0.15 dB,respectively,compared to the CSNet+.The running time of reconstructing a 256×256 image is reduced by 0.1473,0.1789,0.2310,and 0.2524 s compared to ReconNet.Experimental results showed that SAMNet improved the quality of reconstructed images and reduced the reconstruction time.展开更多
Ultra-wide-band (UWB) signals are suitable for localization, since their high time resolution can provide precise time of arrival (TOA) estimation. However, one major challenge in UWB signal processing is the requirem...Ultra-wide-band (UWB) signals are suitable for localization, since their high time resolution can provide precise time of arrival (TOA) estimation. However, one major challenge in UWB signal processing is the requirement of high sampling rate which leads to complicated signal processing and expensive hardware. In this paper, we present a novel UWB signal sampling method called UWB signal sampling via temporal sparsity (USSTS). Its sampling rate is much lower than Nyquist rate. Moreover, it is implemented in one step and no extra processing unit is needed. Simulation results show that USSTS can not recover the signal precisely, but for the use in localization, the accuracy of TOA estimation is the same as that in traditional methods. Therefore, USSTS gives a novel and effective solution for the use of UWB signals in localization.展开更多
Location-Based Services have become an indispensable part of our daily life, the sparsity of location finding makes it possible to estimate specific position by Compressive Sensing(CS). Using public Frequency Modulati...Location-Based Services have become an indispensable part of our daily life, the sparsity of location finding makes it possible to estimate specific position by Compressive Sensing(CS). Using public Frequency Modulation(FM) broadcasting and Digital Television Terrestrial Multimedia Broadcasting(DTMB) signals, this paper presents an indoor positioning scheme, which is consisted of an offline stage and an online stage. In the offline stage, the Received Signal Strength(RSS) at the Reference Points(RPs) is measured, including the average and variance of public FM broadcasting and DTMB signals. In the online stage, the K-Weighted Nearest Neighbor algorithm is used to fulfill coarse positioning, which is able to narrow the selection scope of locations and choose partial RPs for accurate positioning. Then, the accurate positioning is implemented through CS. Experiment shows that the average positioning error of the proposed scheme is 1.63 m. What’s more, a CS-based method has been proposed in this paper to reduce the labor cost when collecting data. Experiment shows the average positioning error is 2.04 m, with the advantage of a 34% labor cost reduction. Experiment results indicate that the proposed system is a practical indoor positioning scheme.展开更多
BACKGROUND A key cardiac magnetic resonance(CMR)challenge is breath-holding duration,difficult for cardiac patients.AIM To evaluate whether artificial intelligence-assisted compressed sensing CINE(AICS-CINE)reduces im...BACKGROUND A key cardiac magnetic resonance(CMR)challenge is breath-holding duration,difficult for cardiac patients.AIM To evaluate whether artificial intelligence-assisted compressed sensing CINE(AICS-CINE)reduces image acquisition time of CMR compared to conventional CINE(C-CINE).METHODS Cardio-oncology patients(n=60)and healthy volunteers(n=29)underwent sequential C-CINE and AI-CS-CINE with a 1.5-T scanner.Acquisition time,visual image quality assessment,and biventricular metrics(end-diastolic volume,endsystolic volume,stroke volume,ejection fraction,left ventricular mass,and wall thickness)were analyzed and compared between C-CINE and AI-CS-CINE with Bland–Altman analysis,and calculation of intraclass coefficient(ICC).RESULTS In 89 participants(58.5±16.8 years,42 males,47 females),total AI-CS-CINE acquisition and reconstruction time(37 seconds)was 84%faster than C-CINE(238 seconds).C-CINE required repeats in 23%(20/89)of cases(approximately 8 minutes lost),while AI-CS-CINE only needed one repeat(1%;2 seconds lost).AICS-CINE had slightly lower contrast but preserved structural clarity.Bland-Altman plots and ICC(0.73≤r≤0.98)showed strong agreement for left ventricle(LV)and right ventricle(RV)metrics,including those in the cardiac amyloidosis subgroup(n=31).AI-CS-CINE enabled faster,easier imaging in patients with claustrophobia,dyspnea,arrhythmias,or restlessness.Motion-artifacted C-CINE images were reliably interpreted from AI-CS-CINE.CONCLUSION AI-CS-CINE accelerated CMR image acquisition and reconstruction,preserved anatomical detail,and diminished impact of patient-related motion.Quantitative AI-CS-CINE metrics agreed closely with C-CINE in cardio-oncology patients,including the cardiac amyloidosis cohort,as well as healthy volunteers regardless of left and right ventricular size and function.AI-CS-CINE significantly enhanced CMR workflow,particularly in challenging cases.The strong analytical concordance underscores reliability and robustness of AI-CS-CINE as a valuable tool.展开更多
In digital signal processing (DSP), Nyquistrate sampling completely describes a signal by exploiting its bandlimitedness. Compressed Sensing (CS), also known as compressive sampling, is a DSP technique efficiently acq...In digital signal processing (DSP), Nyquistrate sampling completely describes a signal by exploiting its bandlimitedness. Compressed Sensing (CS), also known as compressive sampling, is a DSP technique efficiently acquiring and reconstructing a signal completely from reduced number of measurements, by exploiting its compressibility. The measurements are not point samples but more general linear functions of the signal. CS can capture and represent sparse signals at a rate significantly lower than ordinarily used in the Shannon’s sampling theorem. It is interesting to notice that most signals in reality are sparse;especially when they are represented in some domain (such as the wavelet domain) where many coefficients are close to or equal to zero. A signal is called K-sparse, if it can be exactly represented by a basis, , and a set of coefficients , where only K coefficients are nonzero. A signal is called approximately K-sparse, if it can be represented up to a certain accuracy using K non-zero coefficients. As an example, a K-sparse signal is the class of signals that are the sum of K sinusoids chosen from the N harmonics of the observed time interval. Taking the DFT of any such signal would render only K non-zero values . An example of approximately sparse signals is when the coefficients , sorted by magnitude, decrease following a power law. In this case the sparse approximation constructed by choosing the K largest coefficients is guaranteed to have an approximation error that decreases with the same power law as the coefficients. The main limitation of CS-based systems is that they are employing iterative algorithms to recover the signal. The sealgorithms are slow and the hardware solution has become crucial for higher performance and speed. This technique enables fewer data samples than traditionally required when capturing a signal with relatively high bandwidth, but a low information rate. As a main feature of CS, efficient algorithms such as -minimization can be used for recovery. This paper gives a survey of both theoretical and numerical aspects of compressive sensing technique and its applications. The theory of CS has many potential applications in signal processing, wireless communication, cognitive radio and medical imaging.展开更多
A joint two-dimensional(2D)direction-of-arrival(DOA)and radial Doppler frequency estimation method for the L-shaped array is proposed in this paper based on the compressive sensing(CS)framework.Revised from the conven...A joint two-dimensional(2D)direction-of-arrival(DOA)and radial Doppler frequency estimation method for the L-shaped array is proposed in this paper based on the compressive sensing(CS)framework.Revised from the conventional CS-based methods where the joint spatial-temporal parameters are characterized in one large scale matrix,three smaller scale matrices with independent azimuth,elevation and Doppler frequency are introduced adopting a separable observation model.Afterwards,the estimation is achieved by L1-norm minimization and the Bayesian CS algorithm.In addition,under the L-shaped array topology,the azimuth and elevation are separated yet coupled to the same radial Doppler frequency.Hence,the pair matching problem is solved with the aid of the radial Doppler frequency.Finally,numerical simulations corroborate the feasibility and validity of the proposed algorithm.展开更多
Ghost imaging （GI） offers great potential with respect to conventional imaging techniques. It is an open problem in GI systems that a long acquisition time is be required for reconstructing images with good visibili...Ghost imaging （GI） offers great potential with respect to conventional imaging techniques. It is an open problem in GI systems that a long acquisition time is be required for reconstructing images with good visibility and signal-to-noise ratios （SNRs）. In this paper, we propose a new scheme to get good performance with a shorter construction time. We call it correspondence normalized ghost imaging based on compressive sensing （CCNGI）. In the scheme, we enhance the signal-to-noise performance by normalizing the reference beam intensity to eliminate the noise caused by laser power fluctuations, and reduce the reconstruction time by using both compressive sensing （CS） and time-correspondence imaging （CI） techniques. It is shown that the qualities of the images have been improved and the reconstruction time has been reduced using CCNGI scheme. For the two-grayscale ＂double-slit＂ image, the mean square error （MSE） by GI and the normalized GI （NGI） schemes with the measurement number of 5000 are 0.237 and 0.164, respectively, and that is 0.021 by CCNGI scheme with 2500 measurements. For the eight-grayscale ＂lena＂ object, the peak signal-to-noise rates （PSNRs） are 10.506 and 13.098, respectively using G1 and NGI schemes while the value turns to 16.198 using CCNGI scheme. The results also show that a high-fidelity GI reconstruction has been achieved using only 44% of the number of measurements corresponding to the Nyquist limit for the two-grayscale ＂double-slit＂ object. The qualities of the reconstructed images using CCNGI are almost the same as those from GI via sparsity constraints （GISC） with a shorter reconstruction time.展开更多
Sparsity Adaptive Matching Pursuit (SAMP) algorithm is a widely used reconstruction algorithm for compressive sensing in the case that the sparsity is unknown. In order to match the sparsity more accurately, we presen...Sparsity Adaptive Matching Pursuit (SAMP) algorithm is a widely used reconstruction algorithm for compressive sensing in the case that the sparsity is unknown. In order to match the sparsity more accurately, we presented an improved SAMP algorithm based on Regularized Backtracking (SAMP-RB). By adapting a regularized backtracking step to SAMP algorithm in each iteration stage, the proposed algorithm can flexibly remove the inappropriate atoms. The experimental results show that SAMP-RB reconstruction algorithm greatly improves SAMP algorithm both in reconstruction quality and computational time. It has better reconstruction efficiency than most of the available matching pursuit algorithms.展开更多
Media based modulation(MBM)is expected to be a prominent modulation scheme,which has access to the high data rate by using radio frequency(RF)mirrors and fewer transmit antennas.Associated with multiuser multiple inpu...Media based modulation(MBM)is expected to be a prominent modulation scheme,which has access to the high data rate by using radio frequency(RF)mirrors and fewer transmit antennas.Associated with multiuser multiple input multiple output(MIMO),the MBM scheme achieves better performance than other conventional multiuser MIMO schemes.In this paper,the massive MIMO uplink is considered and a conjunctive MBM transmission scheme for each user is employed.This conjunctive MBM transmission scheme gathers aggregate MBM signals in multiple continuous time slots,which exploits the structured sparsity of these aggregate MBM signals.Under this kind of scenario,a multiuser detector with low complexity based on the compressive sensing(CS)theory to gain better detection performance is proposed.This detector is developed from the greedy sparse recovery technique compressive sampling matching pursuit(CoSaMP)and exploits not only the inherently distributed sparsity of MBM signals but also the structured sparsity of multiple aggregate MBM signals.By exploiting these sparsity,the proposed CoSaMP based multiuser detector achieves reliable detection with low complexity.Simulation results demonstrate that the proposed CoSaMP based multiuser detector achieves better detection performance compared with the conventional methods.展开更多
In compressive sensing(CS) based inverse synthetic aperture radar(ISAR) imaging approaches, the quality of final image significantly depends on the number of measurements and the noise level. In this paper, we propose...In compressive sensing(CS) based inverse synthetic aperture radar(ISAR) imaging approaches, the quality of final image significantly depends on the number of measurements and the noise level. In this paper, we propose an improved version of CSbased method for inverse synthetic aperture radar(ISAR) imaging. Different from the traditional l1 norm based CS ISAR imaging method, our method explores the use of Gini index to measure the sparsity of ISAR images to improve the imaging quality. Instead of simultaneous perturbation stochastic approximation(SPSA), we use weighted l1 norm as the surrogate functional and successfully develop an iteratively re-weighted algorithm to reconstruct ISAR images from compressed echo samples. Experimental results show that our approach significantly reduces the number of measurements needed for exact reconstruction and effectively suppresses the noise. Both the peak sidelobe ratio(PSLR) and the reconstruction relative error(RE) indicate that the proposed method outperforms the l1 norm based method.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.52339001).
文摘To investigate the damage evolution caused by stress-driven and sub-critical crack propagation within the Beishan granite under multi-creep triaxial compressive conditions,the distributed optical fiber sensing and X-ray computed tomography were combined to obtain the strain distribution over the sample surface and internal fractures of the samples.The Gini and skewness(G-S)coefficients were used to quantify strain localization during tests,where the Gini coefficient reflects the degree of clustering of elements with high strain values,i.e.,strain localization/delocalization.The strain localization-induced asymmetry of data distribution is quantified by the skewness coefficient.A precursor to granite failure is defined by the rapid and simultaneous increase of the G-S coefficients,which are calculated from strain increment,giving an earlier warning of failure by about 8%peak stress than those from absolute strain values.Moreover,the process of damage accumulation due to stress-driven crack propagation in Beishan granite is different at various confining pressures as the stress exceeds the crack initiation stress.Concretely,strain localization is continuous until brittle failure at higher confining pressure,while both strain localization and delocalization occur at lower confining pressure.Despite the different stress conditions,a similar statistical characteristic of strain localization during the creep stage is observed.The Gini coefficient increases,and the skewness coefficient decreases slightly as the creep stress is below 95%peak stress.When the accelerated strain localization begins,the Gini and skewness coefficients increase rapidly and simultaneously.
基金supported by the National Natural Science Foundation of China(61931012,62171258,62088102,and 62271414)the Zhejiang Provincial Outstanding Youth Science Foundation(LR23F010001)the Key Project of Westlake Institute for Optoelectronics(2023GD007).
文摘It has been over a decade since the first coded aperture video compressive sensing(CS)system was reported.The underlying principle of this technology is to employ a high-frequency modulator in the optical path to modulate a recorded high-speed scene within one integration time.The superimposed image captured in this manner is modulated and compressed,since multiple modulation patterns are imposed.Following this,reconstruction algorithms are utilized to recover the desired high-speed scene.One leading advantage of video CS is that a single captured measurement can be used to reconstruct a multi-frame video,thereby enabling a low-speed camera to capture high-speed scenes.Inspired by this,a number of variants of video CS systems have been built,mainly using different modulation devices.Meanwhile,in order to obtain high-quality reconstruction videos,many algorithms have been developed,from optimization-based iterative algorithms to deep-learning-based ones.Recently,emerging deep learning methods have been dominant due to their high-speed inference and high-quality reconstruction,highlighting the possibility of deploying video CS in practical applications.Toward this end,this paper reviews the progress that has been achieved in video CS during the past decade.We further analyze the efforts that need to be made—in terms of both hardware and algorithms—to enable real applications.Research gaps are put forward and future directions are summarized to help researchers and engineers working on this topic.
基金supported by National Natural Science Foundation of China(12174350)Science and Technology Project of State Grid Henan Electric Power Company(5217Q0240008).
文摘In the heterogeneous power internet of things(IoT)environment,data signals are acquired to support different business systems to realize advanced intelligent applications,with massive,multi-source,heterogeneous and other characteristics.Reliable perception of information and efficient transmission of energy in multi-source heterogeneous environments are crucial issues.Compressive sensing(CS),as an effective method of signal compression and transmission,can accurately recover the original signal only by very few sampling.In this paper,we study a new method of multi-source heterogeneous data signal reconstruction of power IoT based on compressive sensing technology.Based on the traditional compressive sensing technology to directly recover multi-source heterogeneous signals,we fully use the interference subspace information to design the measurement matrix,which directly and effectively eliminates the interference while making the measurement.The measure matrix is optimized by minimizing the average cross-coherence of the matrix,and the reconstruction performance of the new method is further improved.Finally,the effectiveness of the new method with different parameter settings under different multi-source heterogeneous data signal cases is verified by using orthogonal matching pursuit(OMP)and sparsity adaptive matching pursuit(SAMP)for considering the actual environment with prior information utilization of signal sparsity and no prior information utilization of signal sparsity.
文摘Face hallucination or super-resolution is an inverse problem which is underdetermined,and the compressive sensing(CS)theory provides an effective way of seeking inverse problem solutions.In this paper,a novel compressive sensing based face hallucination method is presented,which is comprised of three steps:dictionary learning、sparse coding and solving maximum a posteriori(MAP)formulation.In the first step,the K-SVD dictionary learning algorithm is adopted to obtain a dictionary which can sparsely represent high resolution(HR)face image patches.In the second step,we seek the sparsest representation for each low-resolution(LR)face image paches input using the learned dictionary,super resolution image blocks are obtained from the sparsest coefficients and dictionaries,which then are assembled into super-resolution(SR)image.Finally,MAP formulation is introduced to satisfy the consistency restrictive condition and obtain the higher quality HR images.The experimental results demonstrate that our approach can achieve better super-resolution faces compared with other state-of-the-art method.
基金The National Natural Science Foundation of China (No.60872075)the National High Technology Research and Development Program of China (863 Program) (No.2008AA01Z227)
文摘In order to reduce the pilot number and improve spectral efficiency, recently emerged compressive sensing （CS） is applied to the digital broadcast channel estimation. According to the six channel profiles of the European Telecommunication Standards Institute（ETSI） digital radio mondiale （DRM） standard, the subspace pursuit （SP） algorithm is employed for delay spread and attenuation estimation of each path in the case where the channel profile is identified and the multipath number is known. The stop condition for SP is that the sparsity of the estimation equals the multipath number. For the case where the multipath number is unknown, the orthogonal matching pursuit （OMP） algorithm is employed for channel estimation, while the stop condition is that the estimation achieves the noise variance. Simulation results show that with the same number of pilots, CS algorithms outperform the traditional cubic-spline-interpolation-based least squares （LS） channel estimation. SP is also demonstrated to be better than OMP when the multipath number is known as a priori.
基金Supported by The Featured Innovation Projects of the General University of Guangdong Province(2023KTSCX096)The Special Projects in Key Areas of Guangdong Province(ZDZX1088)Research Team Project of Guangdong University of Education(2024KYCXTD018)。
文摘This paper explores the recovery of block sparse signals in frame-based settings using the l_(2)/l_(q)-synthesis technique(0<q≤1).We propose a new null space property,referred to as block D-NSP_(q),which is based on the dictionary D.We establish that matrices adhering to the block D-NSP_(q)condition are both necessary and sufficient for the exact recovery of block sparse signals via l_(2)/l_(q)-synthesis.Additionally,this condition is essential for the stable recovery of signals that are block-compressible with respect to D.This D-NSP_(q)property is identified as the first complete condition for successful signal recovery using l_(2)/l_(q)-synthesis.Furthermore,we assess the theoretical efficacy of the l2/lq-synthesis method under conditions of measurement noise.
基金supported by the National High Technology Research and Development Program of China(No.2014AA06A602)National Natural Science Foundation of China(No.41404111)Natural Science Foundation of Hunan Province(No.2015JJ3088)
文摘In deep mineral exploration, the acquisition of audio magnetotelluric （AMT） data is severely affected by ambient noise near the observation sites; This near-field noise restricts investigation depths. Mathematical morphological filtering （MMF） proved effective in suppressing large-scale strong and variably shaped noise, typically low-frequency noise, but can not deal with pulse noise of AMT data. We combine compressive sensing and MMF. First we use MMF to suppress the large-scale strong ambient noise; second, we use the improved orthogonal match pursuit （IOMP） algorithm to remove the residual pulse noise. To remove the noise and protect the useful AMT signal, a redundant dictionary that matches with spikes and is insensitive to the useful signal is designed. Synthetic and field data from the Luzong field suggest that the proposed method suppresses the near-source noise and preserves the signal well; thus, better results are obtained that improve the output of either MMF or IOMP.
基金supported in part by the National Key Research and Development Program of China under Grant 2020YFB1804800。
文摘This paper considers the fundamental channel estimation problem for the multiple-input multiple-output orthogonal frequency division multiplexing(MIMO-OFDM)system in the presence of multi-cell interference.Specifically,this paper focuses on both channel modelling and receiver design for interference estimation and mitigation.We propose a delay-calibrated block-wise linear model,which extracts the delay of the dominant tap of each interference as a key parameter and approximates the residual channel coefficients by the recently developed blockwise linear model.Based on the delay-calibrated block-wise linear model and the angle-domain channel sparsity,we further conceive a message passing algorithm to solve the channel estimation problem.Numerical results demonstrate the superior performance of the proposed algorithm over the state-of-the-art algorithms.
基金funded by the National Natural Science Foundation of China(52177074).
文摘Recent advances in AC/DC hybrid power distribution systems have enhanced convenience in daily life.However,DC distribution introduces significant power quality challenges.To address the identification and classification of DC power quality disturbances,this paper proposes a novel methodology integrating Compressed Sensing(CS)with an enhanced Stacked Denoising Autoencoder(SDAE).The proposed approach first employs MATLAB/SIMULINK to model the DC distribution network and generate DC power quality disturbance signals.The measured original signals are then reconstructed using the compressive sensing-based generalized orthogonal matching pursuit(GOMP)algorithm to obtain sparse vectors as the final dataset.Subsequently,a Stacked Denoising Autoencoder model is constructed.The Root Mean Square Propagation(RMSprop)optimization algorithm is introduced to finetune network parameters,thereby reducing the probability of convergence to local optima.Finally,simulation analyses are conducted on five common types of DC power quality disturbance signals.Both raw signals and sparse vectors are utilized as datasets and fed into the encoder model.The results indicate that this method effectively reduces the feature dimensionality for DC power quality disturbance classification while improving both recognition efficiency and accuracy,with additional advantages in noise resistance.
基金supported by National Natural Science Foundation of China(Nos.61261016,61661025)Science and Technology Plan of Gansu Province(No.20JR10RA273).
文摘For image compression sensing reconstruction,most algorithms use the method of reconstructing image blocks one by one and stacking many convolutional layers,which usually have defects of obvious block effects,high computational complexity,and long reconstruction time.An image compressed sensing reconstruction network based on self-attention mechanism(SAMNet)was proposed.For the compressed sampling,self-attention convolution was designed,which was conducive to capturing richer features,so that the compressed sensing measurement value retained more image structure information.For the reconstruction,a self-attention mechanism was introduced in the convolutional neural network.A reconstruction network including residual blocks,bottleneck transformer(BoTNet),and dense blocks was proposed,which strengthened the transfer of image features and reduced the amount of parameters dramatically.Under the Set5 dataset,when the measurement rates are 0.01,0.04,0.10,and 0.25,the average peak signal-to-noise ratio(PSNR)of SAMNet is improved by 1.27,1.23,0.50,and 0.15 dB,respectively,compared to the CSNet+.The running time of reconstructing a 256×256 image is reduced by 0.1473,0.1789,0.2310,and 0.2524 s compared to ReconNet.Experimental results showed that SAMNet improved the quality of reconstructed images and reduced the reconstruction time.
基金supported by National science foundation(No. 60772035): Key technique study on heterogeneous network convergenceDoctoral grant(No.20070004010)s: Study on cross layer design for heterogeneous network convergence+1 种基金National 863 Hi-Tech Projects(No.2007AA01Z277): Pa-rameter design based electromagnetic compatibility study in cognitive radio communication systemNational science foundation(No. 60830001): Wireless communication fundamentals and key techniuqes for high speed rail way control and safety data transmission
文摘Ultra-wide-band (UWB) signals are suitable for localization, since their high time resolution can provide precise time of arrival (TOA) estimation. However, one major challenge in UWB signal processing is the requirement of high sampling rate which leads to complicated signal processing and expensive hardware. In this paper, we present a novel UWB signal sampling method called UWB signal sampling via temporal sparsity (USSTS). Its sampling rate is much lower than Nyquist rate. Moreover, it is implemented in one step and no extra processing unit is needed. Simulation results show that USSTS can not recover the signal precisely, but for the use in localization, the accuracy of TOA estimation is the same as that in traditional methods. Therefore, USSTS gives a novel and effective solution for the use of UWB signals in localization.
基金supported in part by the National Natural Science Foundation of China under grant No.61571244 and No.61871239in part by Tianjin Research Program of Application Foundation and Advanced Technology under grant No.16YFZCSF00540 and No.18YFZCGX00480
文摘Location-Based Services have become an indispensable part of our daily life, the sparsity of location finding makes it possible to estimate specific position by Compressive Sensing(CS). Using public Frequency Modulation(FM) broadcasting and Digital Television Terrestrial Multimedia Broadcasting(DTMB) signals, this paper presents an indoor positioning scheme, which is consisted of an offline stage and an online stage. In the offline stage, the Received Signal Strength(RSS) at the Reference Points(RPs) is measured, including the average and variance of public FM broadcasting and DTMB signals. In the online stage, the K-Weighted Nearest Neighbor algorithm is used to fulfill coarse positioning, which is able to narrow the selection scope of locations and choose partial RPs for accurate positioning. Then, the accurate positioning is implemented through CS. Experiment shows that the average positioning error of the proposed scheme is 1.63 m. What’s more, a CS-based method has been proposed in this paper to reduce the labor cost when collecting data. Experiment shows the average positioning error is 2.04 m, with the advantage of a 34% labor cost reduction. Experiment results indicate that the proposed system is a practical indoor positioning scheme.
基金Supported by James Russell Hornsby and Jun Xiong Fund and United Imaging Healthcare.
文摘BACKGROUND A key cardiac magnetic resonance(CMR)challenge is breath-holding duration,difficult for cardiac patients.AIM To evaluate whether artificial intelligence-assisted compressed sensing CINE(AICS-CINE)reduces image acquisition time of CMR compared to conventional CINE(C-CINE).METHODS Cardio-oncology patients(n=60)and healthy volunteers(n=29)underwent sequential C-CINE and AI-CS-CINE with a 1.5-T scanner.Acquisition time,visual image quality assessment,and biventricular metrics(end-diastolic volume,endsystolic volume,stroke volume,ejection fraction,left ventricular mass,and wall thickness)were analyzed and compared between C-CINE and AI-CS-CINE with Bland–Altman analysis,and calculation of intraclass coefficient(ICC).RESULTS In 89 participants(58.5±16.8 years,42 males,47 females),total AI-CS-CINE acquisition and reconstruction time(37 seconds)was 84%faster than C-CINE(238 seconds).C-CINE required repeats in 23%(20/89)of cases(approximately 8 minutes lost),while AI-CS-CINE only needed one repeat(1%;2 seconds lost).AICS-CINE had slightly lower contrast but preserved structural clarity.Bland-Altman plots and ICC(0.73≤r≤0.98)showed strong agreement for left ventricle(LV)and right ventricle(RV)metrics,including those in the cardiac amyloidosis subgroup(n=31).AI-CS-CINE enabled faster,easier imaging in patients with claustrophobia,dyspnea,arrhythmias,or restlessness.Motion-artifacted C-CINE images were reliably interpreted from AI-CS-CINE.CONCLUSION AI-CS-CINE accelerated CMR image acquisition and reconstruction,preserved anatomical detail,and diminished impact of patient-related motion.Quantitative AI-CS-CINE metrics agreed closely with C-CINE in cardio-oncology patients,including the cardiac amyloidosis cohort,as well as healthy volunteers regardless of left and right ventricular size and function.AI-CS-CINE significantly enhanced CMR workflow,particularly in challenging cases.The strong analytical concordance underscores reliability and robustness of AI-CS-CINE as a valuable tool.
文摘In digital signal processing (DSP), Nyquistrate sampling completely describes a signal by exploiting its bandlimitedness. Compressed Sensing (CS), also known as compressive sampling, is a DSP technique efficiently acquiring and reconstructing a signal completely from reduced number of measurements, by exploiting its compressibility. The measurements are not point samples but more general linear functions of the signal. CS can capture and represent sparse signals at a rate significantly lower than ordinarily used in the Shannon’s sampling theorem. It is interesting to notice that most signals in reality are sparse;especially when they are represented in some domain (such as the wavelet domain) where many coefficients are close to or equal to zero. A signal is called K-sparse, if it can be exactly represented by a basis, , and a set of coefficients , where only K coefficients are nonzero. A signal is called approximately K-sparse, if it can be represented up to a certain accuracy using K non-zero coefficients. As an example, a K-sparse signal is the class of signals that are the sum of K sinusoids chosen from the N harmonics of the observed time interval. Taking the DFT of any such signal would render only K non-zero values . An example of approximately sparse signals is when the coefficients , sorted by magnitude, decrease following a power law. In this case the sparse approximation constructed by choosing the K largest coefficients is guaranteed to have an approximation error that decreases with the same power law as the coefficients. The main limitation of CS-based systems is that they are employing iterative algorithms to recover the signal. The sealgorithms are slow and the hardware solution has become crucial for higher performance and speed. This technique enables fewer data samples than traditionally required when capturing a signal with relatively high bandwidth, but a low information rate. As a main feature of CS, efficient algorithms such as -minimization can be used for recovery. This paper gives a survey of both theoretical and numerical aspects of compressive sensing technique and its applications. The theory of CS has many potential applications in signal processing, wireless communication, cognitive radio and medical imaging.
文摘A joint two-dimensional(2D)direction-of-arrival(DOA)and radial Doppler frequency estimation method for the L-shaped array is proposed in this paper based on the compressive sensing(CS)framework.Revised from the conventional CS-based methods where the joint spatial-temporal parameters are characterized in one large scale matrix,three smaller scale matrices with independent azimuth,elevation and Doppler frequency are introduced adopting a separable observation model.Afterwards,the estimation is achieved by L1-norm minimization and the Bayesian CS algorithm.In addition,under the L-shaped array topology,the azimuth and elevation are separated yet coupled to the same radial Doppler frequency.Hence,the pair matching problem is solved with the aid of the radial Doppler frequency.Finally,numerical simulations corroborate the feasibility and validity of the proposed algorithm.
基金Project supported by the National Natural Science Foundation of China(Grant No.61271238)the Specialized Research Fund for the Doctoral Program of Higher Education of China(Grant No.20123223110003)the University Natural Science Research Foundation of Jiangsu Province,China(Grant No.11KJA510002)
文摘Ghost imaging （GI） offers great potential with respect to conventional imaging techniques. It is an open problem in GI systems that a long acquisition time is be required for reconstructing images with good visibility and signal-to-noise ratios （SNRs）. In this paper, we propose a new scheme to get good performance with a shorter construction time. We call it correspondence normalized ghost imaging based on compressive sensing （CCNGI）. In the scheme, we enhance the signal-to-noise performance by normalizing the reference beam intensity to eliminate the noise caused by laser power fluctuations, and reduce the reconstruction time by using both compressive sensing （CS） and time-correspondence imaging （CI） techniques. It is shown that the qualities of the images have been improved and the reconstruction time has been reduced using CCNGI scheme. For the two-grayscale ＂double-slit＂ image, the mean square error （MSE） by GI and the normalized GI （NGI） schemes with the measurement number of 5000 are 0.237 and 0.164, respectively, and that is 0.021 by CCNGI scheme with 2500 measurements. For the eight-grayscale ＂lena＂ object, the peak signal-to-noise rates （PSNRs） are 10.506 and 13.098, respectively using G1 and NGI schemes while the value turns to 16.198 using CCNGI scheme. The results also show that a high-fidelity GI reconstruction has been achieved using only 44% of the number of measurements corresponding to the Nyquist limit for the two-grayscale ＂double-slit＂ object. The qualities of the reconstructed images using CCNGI are almost the same as those from GI via sparsity constraints （GISC） with a shorter reconstruction time.
基金Supported by the National Natural Science Foundation of China (No. 61073079)the Fundamental Research Funds for the Central Universities (2011JBM216,2011YJS021)
文摘Sparsity Adaptive Matching Pursuit (SAMP) algorithm is a widely used reconstruction algorithm for compressive sensing in the case that the sparsity is unknown. In order to match the sparsity more accurately, we presented an improved SAMP algorithm based on Regularized Backtracking (SAMP-RB). By adapting a regularized backtracking step to SAMP algorithm in each iteration stage, the proposed algorithm can flexibly remove the inappropriate atoms. The experimental results show that SAMP-RB reconstruction algorithm greatly improves SAMP algorithm both in reconstruction quality and computational time. It has better reconstruction efficiency than most of the available matching pursuit algorithms.
基金supported by the National Natural Science Foundation of China(6107116361071164+5 种基金6147119161501233)the Fundamental Research Funds for the Central Universities(NP2014504)the Aeronautical Science Foundation(20152052026)the Electronic & Information School of Yangtze University Innovation Foundation(2016-DXCX-05)the Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘Media based modulation(MBM)is expected to be a prominent modulation scheme,which has access to the high data rate by using radio frequency(RF)mirrors and fewer transmit antennas.Associated with multiuser multiple input multiple output(MIMO),the MBM scheme achieves better performance than other conventional multiuser MIMO schemes.In this paper,the massive MIMO uplink is considered and a conjunctive MBM transmission scheme for each user is employed.This conjunctive MBM transmission scheme gathers aggregate MBM signals in multiple continuous time slots,which exploits the structured sparsity of these aggregate MBM signals.Under this kind of scenario,a multiuser detector with low complexity based on the compressive sensing(CS)theory to gain better detection performance is proposed.This detector is developed from the greedy sparse recovery technique compressive sampling matching pursuit(CoSaMP)and exploits not only the inherently distributed sparsity of MBM signals but also the structured sparsity of multiple aggregate MBM signals.By exploiting these sparsity,the proposed CoSaMP based multiuser detector achieves reliable detection with low complexity.Simulation results demonstrate that the proposed CoSaMP based multiuser detector achieves better detection performance compared with the conventional methods.
基金supported by National Natural Science Foundationof China(Nos.61071146,61171165 and 61301217)Natural ScienceFoundation of Jiangsu Province(No.BK2010488)National Scientific Equipment Developing Project of China(No.2012YQ050250)
文摘In compressive sensing(CS) based inverse synthetic aperture radar(ISAR) imaging approaches, the quality of final image significantly depends on the number of measurements and the noise level. In this paper, we propose an improved version of CSbased method for inverse synthetic aperture radar(ISAR) imaging. Different from the traditional l1 norm based CS ISAR imaging method, our method explores the use of Gini index to measure the sparsity of ISAR images to improve the imaging quality. Instead of simultaneous perturbation stochastic approximation(SPSA), we use weighted l1 norm as the surrogate functional and successfully develop an iteratively re-weighted algorithm to reconstruct ISAR images from compressed echo samples. Experimental results show that our approach significantly reduces the number of measurements needed for exact reconstruction and effectively suppresses the noise. Both the peak sidelobe ratio(PSLR) and the reconstruction relative error(RE) indicate that the proposed method outperforms the l1 norm based method.
