At present,there is currently a lack of unified standard methods for the determination of antimony content in groundwater in China.The precision and trueness of related detection technologies have not yet been systema...At present,there is currently a lack of unified standard methods for the determination of antimony content in groundwater in China.The precision and trueness of related detection technologies have not yet been systematically and quantitatively evaluated,which limits the effective implementation of environmental monitoring.In response to this key technical gap,this study aimed to establish a standardized method for determining antimony in groundwater using Hydride Generation–Atomic Fluorescence Spectrometry(HG-AFS).Ten laboratories participated in inter-laboratory collaborative tests,and the statistical analysis of the test data was carried out in strict accordance with the technical specifications of GB/T 6379.2—2004 and GB/T 6379.4—2006.The consistency and outliers of the data were tested by Mandel's h and k statistics,the Grubbs test and the Cochran test,and the outliers were removed to optimize the data,thereby significantly improving the reliability and accuracy.Based on the optimized data,parameters such as the repeatability limit(r),reproducibility limit(R),and method bias value(δ)were determined,and the trueness of the method was statistically evaluated.At the same time,precision-function relationships were established,and all results met the requirements.The results show that the lower the antimony content,the lower the repeatability limit(r)and reproducibility limit(R),indicating that the measurement error mainly originates from the detection limit of the method and instrument sensitivity.Therefore,improving the instrument sensitivity and reducing the detection limit are the keys to controlling the analytical error and improving precision.This study provides reliable data support and a solid technical foundation for the establishment and evaluation of standardized methods for the determination of antimony content in groundwater.展开更多
Detection of ore waste is crucial for achieving automation in mineral metallurgy production.However,deep learning-based target detection algorithms still face several challenges in iron waste screening,including poor ...Detection of ore waste is crucial for achieving automation in mineral metallurgy production.However,deep learning-based target detection algorithms still face several challenges in iron waste screening,including poor lighting conditions in underground mining environments,dust disturbances,platform vibrations during operation,and limited resources for large-scale computing equipment.These factors contribute to extended computation times and unsatisfactory detection accuracy.To address these challenges,this paper proposes an ore waste detection algorithm based on an improved version of YOLOv5.To enhance feature extraction capabilities,the RepLKNet module is incorporated into the YOLOv5 backbone and neck networks.This module enhances the deformation information of feature extraction with the maximum effective Receptive Field to increase the model's accuracy.The Normalizationbased Attention Module(NAM)was introduced to enhance the attention mechanism by focusing on the most relevant features.This improves accuracy in detecting objects against noisy or unclear backgrounds,thereby further enhancing detection performance while reducing model parameters.Additionally,the loss function is optimized to constrain angular deviation using the SIOU loss function,which prevents the training frame from drifting during training and enhances convergence speed.To validate the performance of the proposed method,we tested it using a self-constructed dataset comprising 1,328 images obtained from the crushing station at Jinchuan Group's No.2 mine.The results indicate that,compared to YOLOv5s on the self-constructed dataset,the proposed algorithm achieves an 18.3%improvement in mAP(0.5),a 54%reduction in FLOPs,and a 52.53%decrease in model parameters.The effectiveness and superiority of the proposed algorithm are demonstrated through case studies and comparative analyses.展开更多
A transformative beryllium metallurgy theory and method was proposed based on the low-temperature dissociation of hydrofluoric acid and purification by exploiting the large difference of fluoride solubility.Hydrofluor...A transformative beryllium metallurgy theory and method was proposed based on the low-temperature dissociation of hydrofluoric acid and purification by exploiting the large difference of fluoride solubility.Hydrofluoric acid can quickly dissociate berylum ore powder directly at low or room temperature with more than 99%dissociation rate.The solubility of AlF_(3),FeF_(3) CrF_(3) and MgF_(2),is low.Coupled with common ion effect,99.9%-purity beryllium products can be prepared without chemical purification.For high-purity beryllium products of grade 4N or higher,they can be prepared through the superior property that the pH intervals of iron,chromium,and other hydroxide precipitates are distinctly different from those corresponding to Be(OH)_(2),precipitates.This new method can be used to prepare most of the beryllium products that are prepared by modern beryllium metallurgy.展开更多
Wellbore breakout is one of the critical issues in drilling due to the fact that the related problems result in additional costs and impact the drilling scheme severely.However,the majority of such wellbore breakout a...Wellbore breakout is one of the critical issues in drilling due to the fact that the related problems result in additional costs and impact the drilling scheme severely.However,the majority of such wellbore breakout analyses were based on continuum mechanics.In addition to failure in intact rocks,wellbore breakouts can also be initiated along natural discontinuities,e.g.weak planes and fractures.Furthermore,the conventional models in wellbore breakouts with uniform distribution fractures could not reflect the real drilling situation.This paper presents a fully coupled hydro-mechanical model of the SB-X well in the Tarim Basin,China for evaluating wellbore breakouts in heavily fractured rocks under anisotropic stress states using the distinct element method(DEM)and the discrete fracture network(DFN).The developed model was validated against caliper log measurement,and its stability study was carried out by stress and displacement analyses.A parametric study was performed to investigate the effects of the characteristics of fracture distribution(orientation and length)on borehole stability by sensitivity studies.Simulation results demonstrate that the increase of the standard deviation of orientation when the fracture direction aligns parallel or perpendicular to the principal stress direction aggravates borehole instability.Moreover,an elevation in the average fracture length causes the borehole failure to change from the direction of the minimum in-situ horizontal principal stress(i.e.the direction of wellbore breakouts)towards alternative directions,ultimately leading to the whole wellbore failure.These findings provide theoretical insights for predicting wellbore breakouts in heavily fractured rocks.展开更多
Evaluation of water richness in sandstone is an important research topic in the prevention and control of mine water disasters,and the water richness in sandstone is closely related to its porosity.The refl ection sei...Evaluation of water richness in sandstone is an important research topic in the prevention and control of mine water disasters,and the water richness in sandstone is closely related to its porosity.The refl ection seismic exploration data have high-density spatial sampling information,which provides an important data basis for the prediction of sandstone porosity in coal seam roofs by using refl ection seismic data.First,the basic principles of the variational mode decomposition(VMD)method and the random forest method are introduced.Then,the geological model of coal seam roof sandstone is constructed,seismic forward modeling is conducted,and random noise is added.The decomposition eff ects of the empirical mode decomposition(EMD)method and VMD method on noisy signals are compared and analyzed.The test results show that the firstorder intrinsic mode functions(IMF1)and IMF2 decomposed by the VMD method contain the main eff ective components of seismic signals.A prediction process of sandstone porosity in coal seam roofs based on the combination of VMD and random forest method is proposed.The feasibility and eff ectiveness of the method are verified by trial calculation in the porosity prediction of model data.Taking the actual coalfield refl ection seismic data as an example,the sandstone porosity of the 8 coal seam roof is predicted.The application results show the potential application value of the new porosity prediction method proposed in this study.This method has important theoretical guiding significance for evaluating water richness in coal seam roof sandstone and the prevention and control of mine water disasters.展开更多
Orthogonal conditional nonlinear optimal perturbations(O-CNOPs)have been used to generate ensemble forecasting members for achieving high forecasting skill of high-impact weather and climate events.However,highly effi...Orthogonal conditional nonlinear optimal perturbations(O-CNOPs)have been used to generate ensemble forecasting members for achieving high forecasting skill of high-impact weather and climate events.However,highly efficient calculations for O-CNOPs are still challenging in the field of ensemble forecasting.In this study,we combine a gradient-based iterative idea with the Gram‒Schmidt orthogonalization,and propose an iterative optimization method to compute O-CNOPs.This method is different from the original sequential optimization method,and allows parallel computations of O-CNOPs,thus saving a large amount of computational time.We evaluate this method by using the Lorenz-96 model on the basis of the ensemble forecasting ability achieved and on the time consumed for computing O-CNOPs.The results demonstrate that the parallel iterative method causes O-CNOPs to yield reliable ensemble members and to achieve ensemble forecasting skills similar to or even slightly higher than those produced by the sequential method.Moreover,the parallel method significantly reduces the computational time for O-CNOPs.Therefore,the parallel iterative method provides a highly effective and efficient approach for calculating O-CNOPs for ensemble forecasts.Expectedly,it can play an important role in the application of the O-CNOPs to realistic ensemble forecasts for high-impact weather and climate events.展开更多
Accurate determination of rockhead is crucial for underground construction.Traditionally,borehole data are mainly used for this purpose.However,borehole drilling is costly,time-consuming,and sparsely distributed.Non-i...Accurate determination of rockhead is crucial for underground construction.Traditionally,borehole data are mainly used for this purpose.However,borehole drilling is costly,time-consuming,and sparsely distributed.Non-invasive geophysical methods,particularly those using passive seismic surface waves,have emerged as viable alternatives for geological profiling and rockhead detection.This study proposes three interpretation methods for rockhead determination using passive seismic surface wave data from Microtremor Array Measurement(MAM)and Horizontal-to-Vertical Spectral Ratio(HVSR)tests.These are:(1)the Wavelength-Normalized phase velocity(WN)method in which a nonlinear relationship between rockhead depth and wavelength is established;(2)the Statistically Determined-shear wave velocity(SD-V_(s))method in which the representative V_(s) value for rockhead is automatically determined using a statistical method;and(3)the empirical HVSR method in which the rockhead is determined by interpreting resonant frequencies using a reliably calibrated empirical equation.These methods were implemented to determine rockhead depths at 28 locations across two distinct geological formations in Singapore,and the results were evaluated using borehole data.The WN method can determine rockhead depths accurately and reliably with minimal absolute errors(average RMSE=3.11 m),demonstrating robust performance across both geological formations.Its advantage lies in interpreting dispersion curves alone,without the need for the inversion process.The SD-V_(s) method is practical in engineering practice owing to its simplicity.The empirical HVSR method reasonably determines rockhead depths with moderate accuracy,benefiting from a reliably calibrated empirical equation.展开更多
The types and structures of inorganic pores are key factors in evaluations of the reservoir space and distribution characteristics of shale oil and gas.However,quantitative identification methods for pores of differen...The types and structures of inorganic pores are key factors in evaluations of the reservoir space and distribution characteristics of shale oil and gas.However,quantitative identification methods for pores of different inorganic components have not yet been fully developed.For this reason,a quantitative characterization method of inorganic pores using pixel information was proposed in this study.A machine learning algorithm was used to assist the field emission scanning electron microscopy(FE-SEM)image processing of shale to realize the accurate identification and quantitative characterization of inorganic pores on the surface of high-precision images of shale with a small view.Moreover,large-view image splicing technology,combined with quantitative evaluation of minerals by scanning electron microscopy(QEMSCAN)image joint characterization technology,was used to accurately analyze the distribution characteristics of inorganic pores under different mineral components.The quantitative methods of pore characteristics of different inorganic components under the pixel information of shale were studied.The results showed that(1)the Waikato Environment for Knowledge Analysis(WEKA)machine learning model can effectively identify and extract shale mineral components and inorganic pore distribution,and the large-view FE-SEM images are representative of samples at the 200μm×200μm view scale,meeting statistical requirements and eliminating the influence of heterogeneity;(2)the pores developed by different mineral components of shale had obvious differences,indicating that the development of inorganic pores is highly correlated with the properties of shale minerals themselves;and(3)the pore-forming ability of different mineral components is calculated by the quantitative method of single component pore-forming coefficient.Chlorite showed the highest pore-forming ability,followed by(in descending order)illite,pyrite,calcite,dolomite,albite,orthoclase,quartz,and apatite.This study contributes to advancing our understanding of inorganic pore characteristics in shale.展开更多
Ceramic spheres,typically with a particle diameter of less than 0.8 mm,are frequently utilized as a critical proppant material in hydraulic fracturing for petroleum and natural gas extraction.Porous ceramic spheres wi...Ceramic spheres,typically with a particle diameter of less than 0.8 mm,are frequently utilized as a critical proppant material in hydraulic fracturing for petroleum and natural gas extraction.Porous ceramic spheres with artificial inherent pores are an important type of lightweight proppant,enabling their transport to distant fracture extremities and enhancing fracture conductivity.However,the focus frequently gravitates towards the low-density advantage,often overlooking the pore geometry impacts on compressive strength by traditional strength evaluation.This paper numerically bypasses such limitations by using a combined finite and discrete element method(FDEM)considering experimental results.The mesh size of the model undergoes validation,followed by the calibration of cohesive element parameters via the single particle compression test.The stimulation elucidates that proppants with a smaller pore size(40μm)manifest crack propagation evolution at a more rapid pace in comparison to their larger-pore counterparts,though the influence of pore diameter on overall strength is subtle.The inception of pores not only alters the trajectory of crack progression but also,with an increase in porosity,leads to a discernible decline in proppant compressive strength.Intriguingly,upon crossing a porosity threshold of 10%,the decrement in strength becomes more gradual.A denser congregation of pores accelerates crack propagation,undermining proppant robustness,suggesting that under analogous conditions,hollow proppants might not match the strength of their porous counterparts.This exploration elucidates the underlying mechanisms of proppant failure from a microstructural perspective,furnishing pivotal insights that may guide future refinements in the architectural design of porous proppant.展开更多
The exploitation of oil resources has now extended to ultra-deep formations,with depths even exceeding 10,000 m.During drilling operations,the bottomhole temperature(BHT)can surpass 240℃.Under such high-temperature c...The exploitation of oil resources has now extended to ultra-deep formations,with depths even exceeding 10,000 m.During drilling operations,the bottomhole temperature(BHT)can surpass 240℃.Under such high-temperature conditions,measurement while drilling(MWD)instruments are highly likely to malfunction due to the inadequate temperature resistance of their electronic components.As a wellbore temperature control approach,the application of thermal insulated drill pipe(TIDP)has been proposed to manage the wellbore temperature in ultra-deep wells.This paper developed a temperature field model for ultra-deep wells by coupling the interactions of multiple factors on the wellbore temperature.For the first time,five distinct TIDP deployment methods were proposed,and their corresponding wellbo re temperature variation characte ristics were investigated,and the heat transfer laws of the ultra-deep wellbore-formation system were quantitatively elucidated.The results revealed that TIDP can effectively restrain the rapid rise in the temperature of the drilling fluid inside the drill string by reducing the heat flux of the drill string.Among the five deployment methods,the method of deploying TIDP from the bottomhole upwards exhibits the best performance.For a 12,000 m simulated well,when6000 m of TIDP are deployed from the bottomhole upwards,the BHT decreases by 52℃,while the outlet temperature increases by merely 1℃.This not only achieves the objective of wellbore temperature control but also keeps the temperature of the drilling fluid at the outlet of annulus at a relatively low level,thereby reducing the requirements for the heat exchange equipment on the ground.The novel findings of this study provide significant guidance for wellbore temperature control in ultra-deep and ultra-high-temperature wells.展开更多
This paper deeply analyzes the characteristics of core courses of the traffic engineering specialty and the problems existing in traditional assessment methods,and proposes a series of reform measures for the assessme...This paper deeply analyzes the characteristics of core courses of the traffic engineering specialty and the problems existing in traditional assessment methods,and proposes a series of reform measures for the assessment methods of core courses of the traffic engineering specialty.By introducing diversified assessment methods,focusing on process assessment,and strengthening the assessment of practical abilities,the aim is to improve students’learning enthusiasm and initiative,and cultivate students’innovation ability and practical ability to meet the needs of traffic engineering professionals in the new era.展开更多
Objective:Existing research mainly relies on quantitative indicators.However,the subjectivity of qualitative indicators and the problem of their difficulty in quantification limit the comprehensiveness of evaluation.T...Objective:Existing research mainly relies on quantitative indicators.However,the subjectivity of qualitative indicators and the problem of their difficulty in quantification limit the comprehensiveness of evaluation.Therefore,a resilience supplier evaluation method based on the improved Z-number-ORESTE is proposed.Methods:Through the construction of a multi-tiered evaluation index system incorporating supplier capabilities,resources,strategic aspects,and resilience,Z-numbers are harnessed to signify qualitative indicators.An advanced Z-number distance metric is implemented,meticulously considering the impact exerted by the reliability portion of Z-numbers on information risk.The refined ORESTE ranking algorithm introduces the concepts of strong and weak orderings and capitalizes on the Borda assignment function.This approach facilitates a more precise appraisal of the performance of alternative solutions.By amalgamating the improved Z-number distance measurement approach with the ORESTE ranking methodology for multi-attribute decision-making,it becomes feasible to more efficiently assess the recovery capacities and adaptability of suppliers in the face of unforeseen incidents and risks.Results:Through the analysis of the comprehensive performance of the existing suppliers of a certain electronics enterprise,the results regarding the suppliers’recovery capabilities and adaptability when facing unexpected events and risks are obtained.Eventually,the suppliers that are in line with the long-term development strategy of the enterprise are selected.Conclusion:This evaluation system has verified its feasibility and effectiveness.Moreover,the system is capable of effectively identifying and selecting resilient suppliers,providing more reliable decision-making support for the enterprise’s supply chain management.展开更多
One-dimensional titanium dioxide(TiO_(2))whiskers with controllable aspect ratios were synthesized by molten salt method adopting anatase TiO_(2)nanoparticles as precursor,sodium chloride(NaCl)and dibasic sodium phosp...One-dimensional titanium dioxide(TiO_(2))whiskers with controllable aspect ratios were synthesized by molten salt method adopting anatase TiO_(2)nanoparticles as precursor,sodium chloride(NaCl)and dibasic sodium phosphate(Na_(2)HPO_(4))as medium.The particle size of TiO_(2)nanoparticles and ratio of precursor and medium that can help to generate high aspect ratio TiO_(2)whiskers were studied and selected.Light-colored antimony-doped tin oxide@titanium dioxide(ATO@TiO_(2))conductive whiskers were prepared by coating ATO on TiO_(2)whiskers through coprecipitation then.Finally,the ATO@TiO_(2)light-colored conductive whiskers were dispersed in polyacrylonitrile(PAN)to fabricate light-colored conductive fibers.The experimental results show that the ATO@TiO_(2)whiskers exhibits ideal whiteness and conductivity with 65.5 Wb and 106Ω·cm,respectively,and the resistivity of conductive fibers was 6.07×10^(6)Ω·cm with 15wt%whisker content.展开更多
In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to ...In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to obtain the maximal positive definite solution of nonlinear matrix equation X+A^(*)X|^(-α)A=Q with the case 0<α≤1.Based on this method,a new iterative algorithm is developed,and its convergence proof is given.Finally,two numerical examples are provided to show the effectiveness of the proposed method.展开更多
In this paper,a novel method for investigating the particle-crushing behavior of breeding particles in a fusion blanket is proposed.The fractal theory and Weibull distribution are combined to establish a theoretical m...In this paper,a novel method for investigating the particle-crushing behavior of breeding particles in a fusion blanket is proposed.The fractal theory and Weibull distribution are combined to establish a theoretical model,and its validity was verified using a simple impact test.A crushable discrete element method(DEM)framework is built based on the previously established theoretical model.The tensile strength,which considers the fractal theory,size effect,and Weibull variation,was assigned to each generated particle.The assigned strength is then used for crush detection by comparing it with its maximum tensile stress.Mass conservation is ensured by inserting a series of sub-particles whose total mass was equal to the quality loss.Based on the crushable DEM framework,a numerical simulation of the crushing behavior of a pebble bed with hollow cylindrical geometry under a uniaxial compression test was performed.The results of this investigation showed that the particle withstands the external load by contact and sliding at the beginning of the compression process,and the results confirmed that crushing can be considered an important method of resisting the increasing external load.A relatively regular particle arrangement aids in resisting the load and reduces the occurrence of particle crushing.However,a limit exists to the promotion of resistance.When the strain increases beyond this limit,the distribution of the crushing position tends to be isotropic over the entire pebble bed.The theoretical model and crushable DEM framework provide a new method for exploring the pebble bed in a fusion reactor,considering particle crushing.展开更多
Effective partitioning is crucial for enabling parallel restoration of power systems after blackouts.This paper proposes a novel partitioning method based on deep reinforcement learning.First,the partitioning decision...Effective partitioning is crucial for enabling parallel restoration of power systems after blackouts.This paper proposes a novel partitioning method based on deep reinforcement learning.First,the partitioning decision process is formulated as a Markov decision process(MDP)model to maximize the modularity.Corresponding key partitioning constraints on parallel restoration are considered.Second,based on the partitioning objective and constraints,the reward function of the partitioning MDP model is set by adopting a relative deviation normalization scheme to reduce mutual interference between the reward and penalty in the reward function.The soft bonus scaling mechanism is introduced to mitigate overestimation caused by abrupt jumps in the reward.Then,the deep Q network method is applied to solve the partitioning MDP model and generate partitioning schemes.Two experience replay buffers are employed to speed up the training process of the method.Finally,case studies on the IEEE 39-bus test system demonstrate that the proposed method can generate a high-modularity partitioning result that meets all key partitioning constraints,thereby improving the parallelism and reliability of the restoration process.Moreover,simulation results demonstrate that an appropriate discount factor is crucial for ensuring both the convergence speed and the stability of the partitioning training.展开更多
The application of nitrogen fertilizers in agricultural fields can lead to the release of nitrogen-containing gases(NCGs),such as NO_(x),NH_(3) and N_(2)O,which can significantly impact regional atmospheric environmen...The application of nitrogen fertilizers in agricultural fields can lead to the release of nitrogen-containing gases(NCGs),such as NO_(x),NH_(3) and N_(2)O,which can significantly impact regional atmospheric environment and con-tribute to global climate change.However,there remain considerable research gaps in the accurate measurement of NCGs emissions from agricultural fields,hindering the development of effective emission reduction strategies.We improved an open-top dynamic chambers(OTDCs)system and evaluated the performance by comparing the measured and given fluxes of the NCGs.The results showed that the measured fluxes of NO,N_(2)O and NH_(3)were 1%,2%and 7%lower than the given fluxes,respectively.For the determination of NH_(3) concentration,we employed a stripping coil-ion chromatograph(SC-IC)analytical technique,which demonstrated an absorption efficiency for atmospheric NH_(3) exceeding 96.1%across sampling durations of 6 to 60 min.In the summer maize season,we utilized the OTDCs system to measure the exchange fluxes of NO,NH_(3),and N_(2)O from the soil in the North China Plain.Substantial emissions of NO,NH_(3) and N_(2)O were recorded following fertilization,with peaks of 107,309,1239 ng N/(m^(2)·s),respectively.Notably,significant NCGs emissions were observed following sus-tained heavy rainfall one month after fertilization,particularly with NH_(3) peak being 4.5 times higher than that observed immediately after fertilization.Our results demonstrate that the OTDCs system accurately reflects the emission characteristics of soil NCGs and meets the requirements for long-term and continuous flux observation.展开更多
Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The t...Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The traditional thermal elastic-plastic finite element method(TEP-FEM)can accurately predict welding deformation.However,its efficiency is low because of the complex nonlinear transient computation,making it difficult to meet the needs of rapid engineering evaluation.To address this challenge,this study proposes an efficient prediction method for welding deformation in marine thin plate butt welds.This method is based on the coupled temperature gradient-thermal strain method(TG-TSM)that integrates inherent strain theory with a shell element finite element model.The proposed method first extracts the distribution pattern and characteristic value of welding-induced inherent strain through TEP-FEM analysis.This strain is then converted into the equivalent thermal load applied to the shell element model for rapid computation.The proposed method-particularly,the gradual temperature gradient-thermal strain method(GTG-TSM)-achieved improved computational efficiency and consistent precision.Furthermore,the proposed method required much less computation time than the traditional TEP-FEM.Thus,this study lays the foundation for future prediction of welding deformation in more complex marine thin plates.展开更多
[Objective] The aim of this study is to isolate Chlorella vulgaris(chlorella)and extract its genomic DNA.[Method] Both the dilution method and drip method were employed to isolate chlorella from lake water samples;the...[Objective] The aim of this study is to isolate Chlorella vulgaris(chlorella)and extract its genomic DNA.[Method] Both the dilution method and drip method were employed to isolate chlorella from lake water samples;the conditions for culturing chlorella were optimized and its genomic DNA was extracted by improved CTAB method and SDS method.[Result] The proper conditions for chlorella culture were as following:temperature 20-25 ℃,illumination 4.39-5.86 W/m2 and rotational speed 100-150r/min;improved CTAB method was suitable for extracting genomic DNA from chlorella.[Conclusion] The study is helpful to study the chlorella at molecular level and promote the exploitation and utilization of chlorella resources.展开更多
The thermal decomposition kinetics of high iron gibbsite ore was investigated under non-isothermal conditions.Popescu method was applied to analyzing the thermal decomposition mechanism.The results show that the most ...The thermal decomposition kinetics of high iron gibbsite ore was investigated under non-isothermal conditions.Popescu method was applied to analyzing the thermal decomposition mechanism.The results show that the most probable thermal decomposition mechanism is the three-dimensional diffusion model of Jander equation,and the mechanism code is D3.The activation energy and pre-exponential factor for thermal decomposition of high iron gibbsite ore calculated by the Popescu method are 75.36 kJ/mol and 1.51×10-5 s-（-1）,respectively.The correctness of the obtained mechanism function is validated by the activation energy acquired by the iso-conversional method.Popescu method is a rational and reliable method for the analysis of the thermal decomposition mechanism of high iron gibbsite ore.展开更多
基金supported by the National Natural Science Foundation of China(Project No.42307555).
文摘At present,there is currently a lack of unified standard methods for the determination of antimony content in groundwater in China.The precision and trueness of related detection technologies have not yet been systematically and quantitatively evaluated,which limits the effective implementation of environmental monitoring.In response to this key technical gap,this study aimed to establish a standardized method for determining antimony in groundwater using Hydride Generation–Atomic Fluorescence Spectrometry(HG-AFS).Ten laboratories participated in inter-laboratory collaborative tests,and the statistical analysis of the test data was carried out in strict accordance with the technical specifications of GB/T 6379.2—2004 and GB/T 6379.4—2006.The consistency and outliers of the data were tested by Mandel's h and k statistics,the Grubbs test and the Cochran test,and the outliers were removed to optimize the data,thereby significantly improving the reliability and accuracy.Based on the optimized data,parameters such as the repeatability limit(r),reproducibility limit(R),and method bias value(δ)were determined,and the trueness of the method was statistically evaluated.At the same time,precision-function relationships were established,and all results met the requirements.The results show that the lower the antimony content,the lower the repeatability limit(r)and reproducibility limit(R),indicating that the measurement error mainly originates from the detection limit of the method and instrument sensitivity.Therefore,improving the instrument sensitivity and reducing the detection limit are the keys to controlling the analytical error and improving precision.This study provides reliable data support and a solid technical foundation for the establishment and evaluation of standardized methods for the determination of antimony content in groundwater.
基金supported by the Department of science and technology of Shaanxi Province(NO.2023-ZDLGY-24).
文摘Detection of ore waste is crucial for achieving automation in mineral metallurgy production.However,deep learning-based target detection algorithms still face several challenges in iron waste screening,including poor lighting conditions in underground mining environments,dust disturbances,platform vibrations during operation,and limited resources for large-scale computing equipment.These factors contribute to extended computation times and unsatisfactory detection accuracy.To address these challenges,this paper proposes an ore waste detection algorithm based on an improved version of YOLOv5.To enhance feature extraction capabilities,the RepLKNet module is incorporated into the YOLOv5 backbone and neck networks.This module enhances the deformation information of feature extraction with the maximum effective Receptive Field to increase the model's accuracy.The Normalizationbased Attention Module(NAM)was introduced to enhance the attention mechanism by focusing on the most relevant features.This improves accuracy in detecting objects against noisy or unclear backgrounds,thereby further enhancing detection performance while reducing model parameters.Additionally,the loss function is optimized to constrain angular deviation using the SIOU loss function,which prevents the training frame from drifting during training and enhances convergence speed.To validate the performance of the proposed method,we tested it using a self-constructed dataset comprising 1,328 images obtained from the crushing station at Jinchuan Group's No.2 mine.The results indicate that,compared to YOLOv5s on the self-constructed dataset,the proposed algorithm achieves an 18.3%improvement in mAP(0.5),a 54%reduction in FLOPs,and a 52.53%decrease in model parameters.The effectiveness and superiority of the proposed algorithm are demonstrated through case studies and comparative analyses.
基金National Key Research and Development Program of China(2021YFC2902301,2021YFC2902302)。
文摘A transformative beryllium metallurgy theory and method was proposed based on the low-temperature dissociation of hydrofluoric acid and purification by exploiting the large difference of fluoride solubility.Hydrofluoric acid can quickly dissociate berylum ore powder directly at low or room temperature with more than 99%dissociation rate.The solubility of AlF_(3),FeF_(3) CrF_(3) and MgF_(2),is low.Coupled with common ion effect,99.9%-purity beryllium products can be prepared without chemical purification.For high-purity beryllium products of grade 4N or higher,they can be prepared through the superior property that the pH intervals of iron,chromium,and other hydroxide precipitates are distinctly different from those corresponding to Be(OH)_(2),precipitates.This new method can be used to prepare most of the beryllium products that are prepared by modern beryllium metallurgy.
基金supported by National Natural Science Foundation of China(Grant Nos.52074312 and 52211530097)CNPC Science and Technology Innovation Foundation(Grant No.2021DQ02-0505).
文摘Wellbore breakout is one of the critical issues in drilling due to the fact that the related problems result in additional costs and impact the drilling scheme severely.However,the majority of such wellbore breakout analyses were based on continuum mechanics.In addition to failure in intact rocks,wellbore breakouts can also be initiated along natural discontinuities,e.g.weak planes and fractures.Furthermore,the conventional models in wellbore breakouts with uniform distribution fractures could not reflect the real drilling situation.This paper presents a fully coupled hydro-mechanical model of the SB-X well in the Tarim Basin,China for evaluating wellbore breakouts in heavily fractured rocks under anisotropic stress states using the distinct element method(DEM)and the discrete fracture network(DFN).The developed model was validated against caliper log measurement,and its stability study was carried out by stress and displacement analyses.A parametric study was performed to investigate the effects of the characteristics of fracture distribution(orientation and length)on borehole stability by sensitivity studies.Simulation results demonstrate that the increase of the standard deviation of orientation when the fracture direction aligns parallel or perpendicular to the principal stress direction aggravates borehole instability.Moreover,an elevation in the average fracture length causes the borehole failure to change from the direction of the minimum in-situ horizontal principal stress(i.e.the direction of wellbore breakouts)towards alternative directions,ultimately leading to the whole wellbore failure.These findings provide theoretical insights for predicting wellbore breakouts in heavily fractured rocks.
基金National Natural Science Foundation of China(Grant No.42274180)National Key Research and Development Program of China(2021YFC2902003).
文摘Evaluation of water richness in sandstone is an important research topic in the prevention and control of mine water disasters,and the water richness in sandstone is closely related to its porosity.The refl ection seismic exploration data have high-density spatial sampling information,which provides an important data basis for the prediction of sandstone porosity in coal seam roofs by using refl ection seismic data.First,the basic principles of the variational mode decomposition(VMD)method and the random forest method are introduced.Then,the geological model of coal seam roof sandstone is constructed,seismic forward modeling is conducted,and random noise is added.The decomposition eff ects of the empirical mode decomposition(EMD)method and VMD method on noisy signals are compared and analyzed.The test results show that the firstorder intrinsic mode functions(IMF1)and IMF2 decomposed by the VMD method contain the main eff ective components of seismic signals.A prediction process of sandstone porosity in coal seam roofs based on the combination of VMD and random forest method is proposed.The feasibility and eff ectiveness of the method are verified by trial calculation in the porosity prediction of model data.Taking the actual coalfield refl ection seismic data as an example,the sandstone porosity of the 8 coal seam roof is predicted.The application results show the potential application value of the new porosity prediction method proposed in this study.This method has important theoretical guiding significance for evaluating water richness in coal seam roof sandstone and the prevention and control of mine water disasters.
基金sponsored by the National Natural Science Foundation of China(Grant Nos.41930971,42330111,and 42405061)the National Key Scientific and Technological Infrastructure project“Earth System Numerical Simulation Facility”(Earth Lab).
文摘Orthogonal conditional nonlinear optimal perturbations(O-CNOPs)have been used to generate ensemble forecasting members for achieving high forecasting skill of high-impact weather and climate events.However,highly efficient calculations for O-CNOPs are still challenging in the field of ensemble forecasting.In this study,we combine a gradient-based iterative idea with the Gram‒Schmidt orthogonalization,and propose an iterative optimization method to compute O-CNOPs.This method is different from the original sequential optimization method,and allows parallel computations of O-CNOPs,thus saving a large amount of computational time.We evaluate this method by using the Lorenz-96 model on the basis of the ensemble forecasting ability achieved and on the time consumed for computing O-CNOPs.The results demonstrate that the parallel iterative method causes O-CNOPs to yield reliable ensemble members and to achieve ensemble forecasting skills similar to or even slightly higher than those produced by the sequential method.Moreover,the parallel method significantly reduces the computational time for O-CNOPs.Therefore,the parallel iterative method provides a highly effective and efficient approach for calculating O-CNOPs for ensemble forecasts.Expectedly,it can play an important role in the application of the O-CNOPs to realistic ensemble forecasts for high-impact weather and climate events.
基金partially supported by the Singapore Ministry of National Development and the National Research Foundation,Prime Minister’s Office,Singapore,under the Land and Liveability National Innovation Challenge(L2 NIC)Research Program(Grant No.L2NICCFP2-2015-1)by the National Research Foundation(NRF)of Singapore,under the Virtual Singapore program(Grant No.NRF2019VSG-GMS-001).
文摘Accurate determination of rockhead is crucial for underground construction.Traditionally,borehole data are mainly used for this purpose.However,borehole drilling is costly,time-consuming,and sparsely distributed.Non-invasive geophysical methods,particularly those using passive seismic surface waves,have emerged as viable alternatives for geological profiling and rockhead detection.This study proposes three interpretation methods for rockhead determination using passive seismic surface wave data from Microtremor Array Measurement(MAM)and Horizontal-to-Vertical Spectral Ratio(HVSR)tests.These are:(1)the Wavelength-Normalized phase velocity(WN)method in which a nonlinear relationship between rockhead depth and wavelength is established;(2)the Statistically Determined-shear wave velocity(SD-V_(s))method in which the representative V_(s) value for rockhead is automatically determined using a statistical method;and(3)the empirical HVSR method in which the rockhead is determined by interpreting resonant frequencies using a reliably calibrated empirical equation.These methods were implemented to determine rockhead depths at 28 locations across two distinct geological formations in Singapore,and the results were evaluated using borehole data.The WN method can determine rockhead depths accurately and reliably with minimal absolute errors(average RMSE=3.11 m),demonstrating robust performance across both geological formations.Its advantage lies in interpreting dispersion curves alone,without the need for the inversion process.The SD-V_(s) method is practical in engineering practice owing to its simplicity.The empirical HVSR method reasonably determines rockhead depths with moderate accuracy,benefiting from a reliably calibrated empirical equation.
基金supported by the National Natural Science Foundation of China(42372144)the Natural Science Foundation of Xinjiang Uygur Autonomous Region(2024D01E09)the Strategic Cooperation Technology Projects of CNPC and CUPB(ZLZX2020-01-05).
文摘The types and structures of inorganic pores are key factors in evaluations of the reservoir space and distribution characteristics of shale oil and gas.However,quantitative identification methods for pores of different inorganic components have not yet been fully developed.For this reason,a quantitative characterization method of inorganic pores using pixel information was proposed in this study.A machine learning algorithm was used to assist the field emission scanning electron microscopy(FE-SEM)image processing of shale to realize the accurate identification and quantitative characterization of inorganic pores on the surface of high-precision images of shale with a small view.Moreover,large-view image splicing technology,combined with quantitative evaluation of minerals by scanning electron microscopy(QEMSCAN)image joint characterization technology,was used to accurately analyze the distribution characteristics of inorganic pores under different mineral components.The quantitative methods of pore characteristics of different inorganic components under the pixel information of shale were studied.The results showed that(1)the Waikato Environment for Knowledge Analysis(WEKA)machine learning model can effectively identify and extract shale mineral components and inorganic pore distribution,and the large-view FE-SEM images are representative of samples at the 200μm×200μm view scale,meeting statistical requirements and eliminating the influence of heterogeneity;(2)the pores developed by different mineral components of shale had obvious differences,indicating that the development of inorganic pores is highly correlated with the properties of shale minerals themselves;and(3)the pore-forming ability of different mineral components is calculated by the quantitative method of single component pore-forming coefficient.Chlorite showed the highest pore-forming ability,followed by(in descending order)illite,pyrite,calcite,dolomite,albite,orthoclase,quartz,and apatite.This study contributes to advancing our understanding of inorganic pore characteristics in shale.
基金the financial support provided by Tianfu Yongxing Laboratory Organized Research Project Funding(No.2023CXXM01)the ARC linkage program(No.LP200100420).
文摘Ceramic spheres,typically with a particle diameter of less than 0.8 mm,are frequently utilized as a critical proppant material in hydraulic fracturing for petroleum and natural gas extraction.Porous ceramic spheres with artificial inherent pores are an important type of lightweight proppant,enabling their transport to distant fracture extremities and enhancing fracture conductivity.However,the focus frequently gravitates towards the low-density advantage,often overlooking the pore geometry impacts on compressive strength by traditional strength evaluation.This paper numerically bypasses such limitations by using a combined finite and discrete element method(FDEM)considering experimental results.The mesh size of the model undergoes validation,followed by the calibration of cohesive element parameters via the single particle compression test.The stimulation elucidates that proppants with a smaller pore size(40μm)manifest crack propagation evolution at a more rapid pace in comparison to their larger-pore counterparts,though the influence of pore diameter on overall strength is subtle.The inception of pores not only alters the trajectory of crack progression but also,with an increase in porosity,leads to a discernible decline in proppant compressive strength.Intriguingly,upon crossing a porosity threshold of 10%,the decrement in strength becomes more gradual.A denser congregation of pores accelerates crack propagation,undermining proppant robustness,suggesting that under analogous conditions,hollow proppants might not match the strength of their porous counterparts.This exploration elucidates the underlying mechanisms of proppant failure from a microstructural perspective,furnishing pivotal insights that may guide future refinements in the architectural design of porous proppant.
基金supported by the National Natural Science Foundation of China(Grant No.U22B2072)Research Project of China Petroleum Science and Technology Innovation Fund(Grant No.2025DQ02-0144)。
文摘The exploitation of oil resources has now extended to ultra-deep formations,with depths even exceeding 10,000 m.During drilling operations,the bottomhole temperature(BHT)can surpass 240℃.Under such high-temperature conditions,measurement while drilling(MWD)instruments are highly likely to malfunction due to the inadequate temperature resistance of their electronic components.As a wellbore temperature control approach,the application of thermal insulated drill pipe(TIDP)has been proposed to manage the wellbore temperature in ultra-deep wells.This paper developed a temperature field model for ultra-deep wells by coupling the interactions of multiple factors on the wellbore temperature.For the first time,five distinct TIDP deployment methods were proposed,and their corresponding wellbo re temperature variation characte ristics were investigated,and the heat transfer laws of the ultra-deep wellbore-formation system were quantitatively elucidated.The results revealed that TIDP can effectively restrain the rapid rise in the temperature of the drilling fluid inside the drill string by reducing the heat flux of the drill string.Among the five deployment methods,the method of deploying TIDP from the bottomhole upwards exhibits the best performance.For a 12,000 m simulated well,when6000 m of TIDP are deployed from the bottomhole upwards,the BHT decreases by 52℃,while the outlet temperature increases by merely 1℃.This not only achieves the objective of wellbore temperature control but also keeps the temperature of the drilling fluid at the outlet of annulus at a relatively low level,thereby reducing the requirements for the heat exchange equipment on the ground.The novel findings of this study provide significant guidance for wellbore temperature control in ultra-deep and ultra-high-temperature wells.
基金Key Project of Educational Science of China Association for Transportation Education and Research(Class B)(JT2024ZD077)。
文摘This paper deeply analyzes the characteristics of core courses of the traffic engineering specialty and the problems existing in traditional assessment methods,and proposes a series of reform measures for the assessment methods of core courses of the traffic engineering specialty.By introducing diversified assessment methods,focusing on process assessment,and strengthening the assessment of practical abilities,the aim is to improve students’learning enthusiasm and initiative,and cultivate students’innovation ability and practical ability to meet the needs of traffic engineering professionals in the new era.
文摘Objective:Existing research mainly relies on quantitative indicators.However,the subjectivity of qualitative indicators and the problem of their difficulty in quantification limit the comprehensiveness of evaluation.Therefore,a resilience supplier evaluation method based on the improved Z-number-ORESTE is proposed.Methods:Through the construction of a multi-tiered evaluation index system incorporating supplier capabilities,resources,strategic aspects,and resilience,Z-numbers are harnessed to signify qualitative indicators.An advanced Z-number distance metric is implemented,meticulously considering the impact exerted by the reliability portion of Z-numbers on information risk.The refined ORESTE ranking algorithm introduces the concepts of strong and weak orderings and capitalizes on the Borda assignment function.This approach facilitates a more precise appraisal of the performance of alternative solutions.By amalgamating the improved Z-number distance measurement approach with the ORESTE ranking methodology for multi-attribute decision-making,it becomes feasible to more efficiently assess the recovery capacities and adaptability of suppliers in the face of unforeseen incidents and risks.Results:Through the analysis of the comprehensive performance of the existing suppliers of a certain electronics enterprise,the results regarding the suppliers’recovery capabilities and adaptability when facing unexpected events and risks are obtained.Eventually,the suppliers that are in line with the long-term development strategy of the enterprise are selected.Conclusion:This evaluation system has verified its feasibility and effectiveness.Moreover,the system is capable of effectively identifying and selecting resilient suppliers,providing more reliable decision-making support for the enterprise’s supply chain management.
基金Funded by the National Natural Science Foundation of China(No.51803076)the Natural Science Foundation of Jiangsu Province of China(No.BK20180629)+1 种基金the China Postdoctoral Science Foundation(No.2018M632231)the Key Laboratory of Special Protective Textiles of Ministry of Education(Jiangnan University)(No.TZFH-24-006)。
文摘One-dimensional titanium dioxide(TiO_(2))whiskers with controllable aspect ratios were synthesized by molten salt method adopting anatase TiO_(2)nanoparticles as precursor,sodium chloride(NaCl)and dibasic sodium phosphate(Na_(2)HPO_(4))as medium.The particle size of TiO_(2)nanoparticles and ratio of precursor and medium that can help to generate high aspect ratio TiO_(2)whiskers were studied and selected.Light-colored antimony-doped tin oxide@titanium dioxide(ATO@TiO_(2))conductive whiskers were prepared by coating ATO on TiO_(2)whiskers through coprecipitation then.Finally,the ATO@TiO_(2)light-colored conductive whiskers were dispersed in polyacrylonitrile(PAN)to fabricate light-colored conductive fibers.The experimental results show that the ATO@TiO_(2)whiskers exhibits ideal whiteness and conductivity with 65.5 Wb and 106Ω·cm,respectively,and the resistivity of conductive fibers was 6.07×10^(6)Ω·cm with 15wt%whisker content.
基金Supported in part by Natural Science Foundation of Guangxi(2023GXNSFAA026246)in part by the Central Government's Guide to Local Science and Technology Development Fund(GuikeZY23055044)in part by the National Natural Science Foundation of China(62363003)。
文摘In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to obtain the maximal positive definite solution of nonlinear matrix equation X+A^(*)X|^(-α)A=Q with the case 0<α≤1.Based on this method,a new iterative algorithm is developed,and its convergence proof is given.Finally,two numerical examples are provided to show the effectiveness of the proposed method.
基金supported by Anhui Provincial Natural Science Foundation(2408085QA030)Natural Science Research Project of Anhui Educational Committee,China(2022AH050825)+3 种基金Medical Special Cultivation Project of Anhui University of Science and Technology(YZ2023H2C008)the Excellent Research and Innovation Team of Anhui Province,China(2022AH010052)the Scientific Research Foundation for High-level Talents of Anhui University of Science and Technology,China(2021yjrc51)Collaborative Innovation Program of Hefei Science Center,CAS,China(2019HSC-CIP006).
文摘In this paper,a novel method for investigating the particle-crushing behavior of breeding particles in a fusion blanket is proposed.The fractal theory and Weibull distribution are combined to establish a theoretical model,and its validity was verified using a simple impact test.A crushable discrete element method(DEM)framework is built based on the previously established theoretical model.The tensile strength,which considers the fractal theory,size effect,and Weibull variation,was assigned to each generated particle.The assigned strength is then used for crush detection by comparing it with its maximum tensile stress.Mass conservation is ensured by inserting a series of sub-particles whose total mass was equal to the quality loss.Based on the crushable DEM framework,a numerical simulation of the crushing behavior of a pebble bed with hollow cylindrical geometry under a uniaxial compression test was performed.The results of this investigation showed that the particle withstands the external load by contact and sliding at the beginning of the compression process,and the results confirmed that crushing can be considered an important method of resisting the increasing external load.A relatively regular particle arrangement aids in resisting the load and reduces the occurrence of particle crushing.However,a limit exists to the promotion of resistance.When the strain increases beyond this limit,the distribution of the crushing position tends to be isotropic over the entire pebble bed.The theoretical model and crushable DEM framework provide a new method for exploring the pebble bed in a fusion reactor,considering particle crushing.
基金funded by the Beijing Engineering Research Center of Electric Rail Transportation.
文摘Effective partitioning is crucial for enabling parallel restoration of power systems after blackouts.This paper proposes a novel partitioning method based on deep reinforcement learning.First,the partitioning decision process is formulated as a Markov decision process(MDP)model to maximize the modularity.Corresponding key partitioning constraints on parallel restoration are considered.Second,based on the partitioning objective and constraints,the reward function of the partitioning MDP model is set by adopting a relative deviation normalization scheme to reduce mutual interference between the reward and penalty in the reward function.The soft bonus scaling mechanism is introduced to mitigate overestimation caused by abrupt jumps in the reward.Then,the deep Q network method is applied to solve the partitioning MDP model and generate partitioning schemes.Two experience replay buffers are employed to speed up the training process of the method.Finally,case studies on the IEEE 39-bus test system demonstrate that the proposed method can generate a high-modularity partitioning result that meets all key partitioning constraints,thereby improving the parallelism and reliability of the restoration process.Moreover,simulation results demonstrate that an appropriate discount factor is crucial for ensuring both the convergence speed and the stability of the partitioning training.
基金supported by the National Key Research and Develop-ment Program(No.2022YFC3701103)the National Natural Science Foundation of China(Nos.42130714 and 41931287).
文摘The application of nitrogen fertilizers in agricultural fields can lead to the release of nitrogen-containing gases(NCGs),such as NO_(x),NH_(3) and N_(2)O,which can significantly impact regional atmospheric environment and con-tribute to global climate change.However,there remain considerable research gaps in the accurate measurement of NCGs emissions from agricultural fields,hindering the development of effective emission reduction strategies.We improved an open-top dynamic chambers(OTDCs)system and evaluated the performance by comparing the measured and given fluxes of the NCGs.The results showed that the measured fluxes of NO,N_(2)O and NH_(3)were 1%,2%and 7%lower than the given fluxes,respectively.For the determination of NH_(3) concentration,we employed a stripping coil-ion chromatograph(SC-IC)analytical technique,which demonstrated an absorption efficiency for atmospheric NH_(3) exceeding 96.1%across sampling durations of 6 to 60 min.In the summer maize season,we utilized the OTDCs system to measure the exchange fluxes of NO,NH_(3),and N_(2)O from the soil in the North China Plain.Substantial emissions of NO,NH_(3) and N_(2)O were recorded following fertilization,with peaks of 107,309,1239 ng N/(m^(2)·s),respectively.Notably,significant NCGs emissions were observed following sus-tained heavy rainfall one month after fertilization,particularly with NH_(3) peak being 4.5 times higher than that observed immediately after fertilization.Our results demonstrate that the OTDCs system accurately reflects the emission characteristics of soil NCGs and meets the requirements for long-term and continuous flux observation.
基金Supported by the National Natural Science Foundation of China under Grant No.51975138the High-Tech Ship Scientific Research Project from the Ministry of Industry and Information Technology under Grant No.CJ05N20the National Defense Basic Research Project under Grant No.JCKY2023604C006.
文摘Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The traditional thermal elastic-plastic finite element method(TEP-FEM)can accurately predict welding deformation.However,its efficiency is low because of the complex nonlinear transient computation,making it difficult to meet the needs of rapid engineering evaluation.To address this challenge,this study proposes an efficient prediction method for welding deformation in marine thin plate butt welds.This method is based on the coupled temperature gradient-thermal strain method(TG-TSM)that integrates inherent strain theory with a shell element finite element model.The proposed method first extracts the distribution pattern and characteristic value of welding-induced inherent strain through TEP-FEM analysis.This strain is then converted into the equivalent thermal load applied to the shell element model for rapid computation.The proposed method-particularly,the gradual temperature gradient-thermal strain method(GTG-TSM)-achieved improved computational efficiency and consistent precision.Furthermore,the proposed method required much less computation time than the traditional TEP-FEM.Thus,this study lays the foundation for future prediction of welding deformation in more complex marine thin plates.
基金Supported by the High-level Talents Start-up Fund of Shihezi University(07002-500002061401)~~
文摘[Objective] The aim of this study is to isolate Chlorella vulgaris(chlorella)and extract its genomic DNA.[Method] Both the dilution method and drip method were employed to isolate chlorella from lake water samples;the conditions for culturing chlorella were optimized and its genomic DNA was extracted by improved CTAB method and SDS method.[Result] The proper conditions for chlorella culture were as following:temperature 20-25 ℃,illumination 4.39-5.86 W/m2 and rotational speed 100-150r/min;improved CTAB method was suitable for extracting genomic DNA from chlorella.[Conclusion] The study is helpful to study the chlorella at molecular level and promote the exploitation and utilization of chlorella resources.
基金Project(51374058)supported by the National Natural Science Foundation of China
文摘The thermal decomposition kinetics of high iron gibbsite ore was investigated under non-isothermal conditions.Popescu method was applied to analyzing the thermal decomposition mechanism.The results show that the most probable thermal decomposition mechanism is the three-dimensional diffusion model of Jander equation,and the mechanism code is D3.The activation energy and pre-exponential factor for thermal decomposition of high iron gibbsite ore calculated by the Popescu method are 75.36 kJ/mol and 1.51×10-5 s-（-1）,respectively.The correctness of the obtained mechanism function is validated by the activation energy acquired by the iso-conversional method.Popescu method is a rational and reliable method for the analysis of the thermal decomposition mechanism of high iron gibbsite ore.
