The cavity characteristics in liquid-filled containers caused by high-velocity impacts represent an important area of research in hydrodynamic ram phenomena.The dynamic expansion of the cavity induces liquid pressure ...The cavity characteristics in liquid-filled containers caused by high-velocity impacts represent an important area of research in hydrodynamic ram phenomena.The dynamic expansion of the cavity induces liquid pressure variations,potentially causing catastrophic damage to the container.Current studies mainly focus on non-deforming projectiles,such as fragments,with limited exploration of shaped charge jets.In this paper,a uniquely experimental system was designed to record cavity profiles in behind-armor liquid-filled containers subjected to shaped charge jet impacts.The impact process was then numerically reproduced using the explicit simulation program ANSYS LS-DYNA with the Structured Arbitrary Lagrangian-Eulerian(S-ALE)solver.The formation mechanism,along with the dimensional and shape evolution of the cavity was investigated.Additionally,the influence of the impact kinetic energy of the jet on the cavity characteristics was analyzed.The findings reveal that the cavity profile exhibits a conical shape,primarily driven by direct jet impact and inertial effects.The expansion rates of both cavity length and maximum radius increase with jet impact kinetic energy.When the impact kinetic energy is reduced to 28.2 kJ or below,the length-to-diameter ratio of the cavity ultimately stabilizes at approximately 7.展开更多
The population growth in Ghana has assumed an alarming rate.The provision of urban infrastructure and housing has however not been commensurate with the demand especially in housing,thus the acute housing deficit.The ...The population growth in Ghana has assumed an alarming rate.The provision of urban infrastructure and housing has however not been commensurate with the demand especially in housing,thus the acute housing deficit.The idea of using shipping containers as a building component is by no means new in the Accra Metropolis as most shipping containers are re-constructed architecturally and used for temporary accommodation needs like storage,make-shift shops,emergency shelters and site offices.The concept of using these shipping containers as modular building components in architecture however,is still foreign to building practitioners and the nation at large.This research paper set out to use the containers not for luxury apartments but to harness the merits of availability,low-cost of resource,speed of construction and structural stability of the International Standard Organization(ISO)shipping containers in addressing the housing deficiency problem in the nation by meeting the basic need of shelter.Based on the hypothesis of being a cheaper alternative to the concrete and sand-crete blocks,which is the main construction technology used now,similar house types of both technologies were compared to ascertain the variation as part of the methodology for this research.The methodology also included literature reviews and case studies.The scope of this study was limited to 2-bedroom single-storey and multi-storey house types in Accra,the capital city of Ghana.In the final analysis however,this research proved that the container house is not cheaper than the traditional blockwork and concrete construction method is and is better used in temporary accommodation,in situations where time is essential.展开更多
In a cloud environment,graphics processing units(GPUs)are the primary devices used for high-performance computation.They exploit flexible resource utilization,a key advantage of cloud environments.Multiple users share...In a cloud environment,graphics processing units(GPUs)are the primary devices used for high-performance computation.They exploit flexible resource utilization,a key advantage of cloud environments.Multiple users share GPUs,which serve as coprocessors of central processing units(CPUs)and are activated only if tasks demand GPU computation.In a container environment,where resources can be shared among multiple users,GPU utilization can be increased by minimizing idle time because the tasks of many users run on a single GPU.However,unlike CPUs and memory,GPUs cannot logically multiplex their resources.Additionally,GPU memory does not support over-utilization:when it runs out,tasks will fail.Therefore,it is necessary to regulate the order of execution of concurrently running GPU tasks to avoid such task failures and to ensure equitable GPU sharing among users.In this paper,we propose a GPU task execution order management technique that controls GPU usage via time-based containers.The technique seeks to ensure equal GPU time among users in a container environment to prevent task failures.In the meantime,we use a deferred processing method to prevent GPU memory shortages when GPU tasks are executed simultaneously and to determine the execution order based on the GPU usage time.As the order of GPU tasks cannot be externally adjusted arbitrarily once the task commences,the GPU task is indirectly paused by pausing the container.In addition,as container pause/unpause status is based on the information about the available GPU memory capacity,overuse of GPU memory can be prevented at the source.As a result,the strategy can prevent task failure and the GPU tasks can be experimentally processed in appropriate order.展开更多
Liquid-filled containers(LFC)are widely used to store and transport petroleum,chemical reagents,and other resources.As an important target of military strikes and terrorist bombings,LFC are vulnerable to blast waves a...Liquid-filled containers(LFC)are widely used to store and transport petroleum,chemical reagents,and other resources.As an important target of military strikes and terrorist bombings,LFC are vulnerable to blast waves and fragments.To explore the protective effect of polyurea elastomer on LFC,the damage characteristics of polyurea coated liquid-filled container(PLFC)under the combined loading of blast shock wave and fragments were studied experimentally.The microstructure of the polyurea layer was observed by scanning electron microscopy,and the fracture and self-healing phenomena were analyzed.The simulation approach was used to explain the combined blast-and fragments-induced on the PLFC in detail.Finally,the effects of shock wave and fragment alone and in combination on the damage of PLFC were comprehensively compared.Results showed that the polyurea reduces the perforation rate of the fragment to the LFC,and the self-healing phenomenon could also reduce the liquid loss rate inside the container.The polyurea reduces the degree of depression in the center of the LFC,resulting in a decrease in the distance between adjacent fragments penetrating the LFC,and an increase in the probability of transfixion and fracture between holes.Under the close-in blast,the detonation shock wave reached the LFC before the fragment.Polyurea does not all have an enhanced effect on the protection of LFC.The presence of internal water enhances the anti-blast performance of the container,and the hydrodynamic ram(HRAM)formed by the fragment impacting the water aggravated the plastic deformation of the container.The combined action has an enhancement effect on the deformation of the LFC.The depth of the container depression was 27%higher than that of the blast shock wave alone;thus,it cannot be simply summarized as linear superposition.展开更多
The impact of high-velocity penetrators into liquid-filled containers can generate hydrodynamic ram effects,potentially causing catastrophic structural damage to the container.Previous studies have primarily focused o...The impact of high-velocity penetrators into liquid-filled containers can generate hydrodynamic ram effects,potentially causing catastrophic structural damage to the container.Previous studies have primarily focused on undeformed penetrators,such as fragments or bullets,with limited attention directed toward shaped charge jets.This study investigates the penetration characteristics of shaped charge jets impacting behind-armor liquid-filled containers,with particular emphasis on jet-liquid interactions.A theoretical penetration model incorporating material compressibility and jet stretching was developed based on the virtual origin theory.A high-speed imaging experimental system was designed to capture the jet motion within the container.The impact process was numerically reproduced using ANSYS/LSDYNA,and the effects of standoff and overmatch on jet penetration were analyzed.The results reveal that jet stretching induced by increased standoff enhances the penetration velocity of the jet.A proportional relationship between the stretching factor(λ)and the overmatch parameter(I)was identified,withλranging from approximately 1.22 to 1.38 times I across the studied standoff range(80-220 mm).The findings offer a basis for future studies on the pressure distribution in the liquid and the structural response of containers.展开更多
Virtualization is an indispensable part of the cloud for the objective of deploying different virtual servers over the same physical layer.However,the increase in the number of applications executing on the repositori...Virtualization is an indispensable part of the cloud for the objective of deploying different virtual servers over the same physical layer.However,the increase in the number of applications executing on the repositories results in increased overload due to the adoption of cloud services.Moreover,the migration of applications on the cloud with optimized resource allocation is a herculean task even though it is employed for minimizing the dilemma of allocating resources.In this paper,a Fire Hawk Optimization enabled Deep Learning Scheme(FHOEDLS)is proposed for minimizing the overload and optimizing the resource allocation on the hybrid cloud container architecture for migrating interoperability based applications This FHOEDLS achieves the load prediction through the utilization of deep CNN-GRU-AM model for attaining resource allocation and better migration of applications.It specifically adopted the Fire Hawk Optimization Algorithm(FHOA)for optimizing the parameters that influence the factors that aid in better interoperable application migration with improved resource allocation and minimized overhead.It considered the factors of resource capacity,transmission cost,demand,and predicted load into account during the formulation of the objective function utilized for resource allocation and application migration.The cloud simulation of this FHOEDLS is achieved using a container,Virtual Machine(VM),and Physical Machine(PM).The results of this proposed FHOEDLS confirmed a better resource capability of 0.418 and a minimized load of 0.0061.展开更多
Structural properties of the ship container logistics network of China(SCLNC)are studied in the light of recent investigations of complex networks.SCLNC is composed of a set of routes and ports located along the sea o...Structural properties of the ship container logistics network of China(SCLNC)are studied in the light of recent investigations of complex networks.SCLNC is composed of a set of routes and ports located along the sea or river.Network properties including the degree distribution,degree correlations,clustering,shortest path length,centrality and betweenness are studied in different definition of network topology.It is found that geographical constraint plays an important role in the network topology of SCLNC.We also study the traffic flow of SCLNC based on the weighted network representation,and demonstrate the weight distribution can be described by power law or exponential function depending on the assumed definition of network topology.Other features related to SCLNC are also investigated.展开更多
Images and videos play an increasingly vital role in daily life and are widely utilized as key evidentiary sources in judicial investigations and forensic analysis.Simultaneously,advancements in image and video proces...Images and videos play an increasingly vital role in daily life and are widely utilized as key evidentiary sources in judicial investigations and forensic analysis.Simultaneously,advancements in image and video processing technologies have facilitated the widespread availability of powerful editing tools,such as Deepfakes,enabling anyone to easily create manipulated or fake visual content,which poses an enormous threat to social security and public trust.To verify the authenticity and integrity of images and videos,numerous approaches have been proposed,which are primarily based on content analysis and their effectiveness is susceptible to interference from various image or video post-processing operations.Recent research has highlighted the potential of file containers analysis as a promising forensic approach that offers efficient and interpretable results.However,there is still a lack of review articles on this kind of approach.In order to fill this gap,we present a comprehensive review of file containers-based image and video forensics in this paper.Specifically,we categorize the existing methods into two distinct stages,qualitative analysis and quantitative analysis.In addition,an overall framework is proposed to organize the exiting approaches.Then,the advantages and disadvantages of the schemes used across different forensic tasks are provided.Finally,we outline the trends in this research area,aiming to provide valuable insights and technical guidance for future research.展开更多
Container-based virtualization technology has been more widely used in edge computing environments recently due to its advantages of lighter resource occupation, faster startup capability, and better resource utilizat...Container-based virtualization technology has been more widely used in edge computing environments recently due to its advantages of lighter resource occupation, faster startup capability, and better resource utilization efficiency. To meet the diverse needs of tasks, it usually needs to instantiate multiple network functions in the form of containers interconnect various generated containers to build a Container Cluster(CC). Then CCs will be deployed on edge service nodes with relatively limited resources. However, the increasingly complex and timevarying nature of tasks brings great challenges to optimal placement of CC. This paper regards the charges for various resources occupied by providing services as revenue, the service efficiency and energy consumption as cost, thus formulates a Mixed Integer Programming(MIP) model to describe the optimal placement of CC on edge service nodes. Furthermore, an Actor-Critic based Deep Reinforcement Learning(DRL) incorporating Graph Convolutional Networks(GCN) framework named as RL-GCN is proposed to solve the optimization problem. The framework obtains an optimal placement strategy through self-learning according to the requirements and objectives of the placement of CC. Particularly, through the introduction of GCN, the features of the association relationship between multiple containers in CCs can be effectively extracted to improve the quality of placement.The experiment results show that under different scales of service nodes and task requests, the proposed method can obtain the improved system performance in terms of placement error ratio, time efficiency of solution output and cumulative system revenue compared with other representative baseline methods.展开更多
The evolution mechanism of railway transportation network nodes driven by sea-rail intermodal transport(SRIT),a globally prevalent logistics method,has not been thoroughly investigated.From the perspective of SRIT,thi...The evolution mechanism of railway transportation network nodes driven by sea-rail intermodal transport(SRIT),a globally prevalent logistics method,has not been thoroughly investigated.From the perspective of SRIT,this study constructed a framework for understanding the evolution of railway container transport network nodes using Northeast China from 2013 to 2020 as a case study.It leverages proprietary data from 95306 Railway Freight E-commerce Platform.By employing the hybrid EWM-GA-TOPSIS model,complex network analysis,modified gravity model,and correlation and regression analyses,this study delves into the spatiotemporal patterns and dynamic transformations of railway container freight stations(RCFS).Finally,the long-term relationship between the RCFS and SRIT is explored.The results indicate that the spatial and temporal analysis of the RCFS in Northeast China from 2013 to 2020 revealed a clear polarisation trend,with the top-ranked stations mainly concentrated near ports and important transportation hubs.Additionally,the RCFS exhibited an expansionary trend;however,its development was uneven,and there was a significant increase in the number of new stations compared to abandoned stations,indicating an overall positive growth tendency.Moreover,the intensity of the SRIT at the RCFS in Northeast China notably increased.A significant positive linear relationship exists between SRIT and the freight capacity of all stations.A relatively pronounced correlation was observed for high-intensity stations,whereas a relatively weak correlation was observed for low-intensity stations.This study not only provides an effective framework for future research on RCFS within the context of SRIT but also serves as a scientific reference for promoting the implementation of the national strategy for multimodal transportation.展开更多
Automated guided vehicles(AGVs)are key equipment in automated container terminals(ACTs),and their operational efficiency can be impacted by conflicts and battery swapping.Additionally,AGVs have bidirectional transport...Automated guided vehicles(AGVs)are key equipment in automated container terminals(ACTs),and their operational efficiency can be impacted by conflicts and battery swapping.Additionally,AGVs have bidirectional transportation capabilities,allowing them tomove in the opposite directionwithout turning around,which helps reduce transportation time.This paper aims at the problem of AGV scheduling and bidirectional conflict-free routing with battery swapping in automated terminals.A bi-level mixed integer programming(MIP)model is proposed,taking into account task assignment,bidirectional conflict-free routing,and battery swapping.The upper model focuses on container task assignment and AGV battery swapping planning,while the lower model ensures conflict-free movement of AGVs.A double-threshold battery swapping strategy is introduced,allowing AGVs to utilize waiting time for loading for battery swapping.An improved differential evolution variable neighborhood search(IDE-VNS)algorithm is developed to solve the bi-level MIP model,aiming to minimize the completion time of all jobs.Experimental results demonstrate that compared to the differential evolution(DE)algorithm and the genetic algorithm(GA),the IDEVNS algorithmreduces fitness values by 44.49% and 45.22%,though it does increase computation time by 56.28% and 62.03%,respectively.Bidirectional transportation reduces the fitness value by an average of 10.97% when the container scale is small.As the container scale increases,the fitness value of bidirectional transportation gradually approaches that of unidirectional transportation.The results further show that the double-threshold battery swapping strategy enhances AGV utilization and reduces the fitness value.展开更多
[Objective] The experiment was aimed to select effective and economical media for container seedling of triploid clones of Populus tomentosa that was carried out. [Method] The sandy loam, peat, perlite, vermiculite, r...[Objective] The experiment was aimed to select effective and economical media for container seedling of triploid clones of Populus tomentosa that was carried out. [Method] The sandy loam, peat, perlite, vermiculite, riversand, sludge were taken as media of hardwood cutting and survival rate, seedling height were taken as indexes to select media for container seedling of triploid clones of Populus tomentosa. [Result] Different mixedmedia had great influence on survival rates of container seedlings. Taking peat and vermiculite with the proportion of 5∶2 (M10) or peat ,vermiculite with the proportion of 7∶2 (M11) or sandy loam (M1) as media would generate higher cutting survival rate that was higher than 90.0%. There were significant differece in height increments of container seedlings. Taking sandy loam, peat and vermiculite with the proportion of 6∶2∶2(M5)or sandy loam (M1), seedling height of 60-days the seedling was over 37.0 cm. [Conclusion] According to cost analysis of nursery medium, the optimum medium for hardwood cuttings container seedling-raising of triploid clones of Populus tomentosa was sandy loam.展开更多
The objective of this study was to evaluate the influence of infusion container design on the volume of residual drug solution following use in a clinical setting. 0.9% （w/v） NaCl infusion solution containers （5 ty...The objective of this study was to evaluate the influence of infusion container design on the volume of residual drug solution following use in a clinical setting. 0.9% （w/v） NaCl infusion solution containers （5 types, each of three capacities： 100 mL, 250 mL and 500 mL） following clinical use for in-patients at Peking University Third Hospital were collected during Sept. and Oct. 2007. The volume of residual drug solution was determined. Hospital pharmacy records were used to determine the potential economic implications of discarding residual drug solutions. The mean residual volumes ranged from 0.38 mL to 4.80 mL and, in general, residual volume increased with increasing container capacity. The residual volumes for one type of double-port soft bag were significantly lower than the residual volumes for all other containers of the same capacity （P〈0.05）, including glass and semi-rigid plastic bottles. Highest residual volumes were observed for the single-port soft bag. Estimates of the value of discarded residual drug solution ranged from approximately US $15,000 to US $150,000 per annum in our hospital. Infusion container design has a major influence on residual drug solution volumes following intravenous infusion. Appropriate choice of bag design remains an important consideration for the economics and efficacy of infusion treatment in Chinese hospitals.展开更多
In order to improve the survival rate of planting seedlings of Phoebe zhen-nan, the grading standard for one-year-old container seedlings of Phoebe zhennan was developed by using cluster analysis. The results showed t...In order to improve the survival rate of planting seedlings of Phoebe zhen-nan, the grading standard for one-year-old container seedlings of Phoebe zhennan was developed by using cluster analysis. The results showed that the quality of Phoebe zhennan container seedlings could be estimated from seedling height and ground diameter. The Phoebe zhennan container seedlings were divided into 3 grades： Grade 1 （seedling height ≥ 38 cm; ground diameter ≥ 0.65 cm）, Grade 2 （31.7 cm ≤ seedling height 〈 38 cm; 0.56 cm ≤ ground diameter 〈 0.65 cm） and Grade 3 （seedling height 〈 31.7 cm; ground diameter 〈 0.56 cm）.展开更多
The similarities and differences between the container terminal logistics system(CTLS)and the Harvard-architecture computer system are compared in terms of organization and architecture.The mapping relation and the mo...The similarities and differences between the container terminal logistics system(CTLS)and the Harvard-architecture computer system are compared in terms of organization and architecture.The mapping relation and the modeling framework of the CTLS are presented based on multi-agent,and the successful algorithms in the computer domain are applied to the modeling framework,such as the dynamic priority and multilevel feedback scheduling algorithm.In addition,a model and simulation on a certain quay at Shanghai harbor is built up on the AnyLogic platform to support the decision-making of terminal on service cost.It validates the feasibility and creditability of the above systematic methodology.展开更多
[Objective] This study aimed to investigate the optimal component of culti- vation medium for container seedling raising of Camellia oleifera. [Method] In the application of container nursery technology of Camellia ol...[Objective] This study aimed to investigate the optimal component of culti- vation medium for container seedling raising of Camellia oleifera. [Method] In the application of container nursery technology of Camellia oleifera grafting in emergent stocks, yellow clay soil, surface soil of pine forest, decomposed edible fungus, peat soil, dung and dirt were mixed by different proportions into five formulae as nursery substrates, with garden soil as the control, in order to investigate the influences of various substrates on the growth of annual Camellia oleifera container seedlings by using randomized block design based on variance analysis and multiple comparisons, and to screen the optimal substrate formula for container nursery of Camellia oleifera. [Result] The influences of different substrates on the transplanting survival rate, seedling height, basal diameter, height-diameter ratio and lateral root length of Camellia oleifera container seedlings were significantly different. Various growth indi- cators of Camellia oleifera container seedlings cultivated in the substrate containing 40% of yellow clay soil ＋ 15% of surface soil of pine forest ＋ 20% of decomposed edible fungus ＋ 20% of peat soil ＋ 5% of dung and dirt exceeded that of the control and other substrate formulae, which could be used as the optimal substrate formula for the container nursery of Camellia oleifera. [Conclusion] This study screened the optimal substrate formula for the container nursery of Camellia oleifera, which provided technical reference for the cultivation of Camellia oleifera container seedlings.展开更多
The teaching design is based on the task of "Container Transport" in the course of"English for International Shipping Business", aiming to discuss Design of information teaching in Business English...The teaching design is based on the task of "Container Transport" in the course of"English for International Shipping Business", aiming to discuss Design of information teaching in Business English Class. MOSO TEACH, CFNET platform,Cartoon have been applied in the design. Informationalized teaching has brought the vividness and dramatic effect to the knowledgebased class.展开更多
An efcient approach for yard crane(YC)scheduling is proposed in this paper.The definition of task group for YC scheduling is proposed.A mixed integer programming(MIP)model is developed.In the model,objective functions...An efcient approach for yard crane(YC)scheduling is proposed in this paper.The definition of task group for YC scheduling is proposed.A mixed integer programming(MIP)model is developed.In the model,objective functions are subject to the minimization of the total delay of complete time for all task groups and the minimization of block-to-block movements of YCs.Due to the computational scale of the non-deterministic polynomial(NP)complete problem regarding YC scheduling,a rolling-horizon decision-making strategy is employed to solve this problem,by converting the MIP model into another MIP model in the scheduling of each rolling period.Afterwards,a heuristic algorithm based on modified A*search is developed to solve the converted model and obtain near optimal solution.Finally,the computational experiments are used to examine the performance of the proposed approach for YC scheduling.展开更多
Heavy thickness steel plates with a good combination of strength,toughness and weldability have been demanded for building of large container ships.High strength steel plates with heavy gauge of EH36,EH40 and EH47 gra...Heavy thickness steel plates with a good combination of strength,toughness and weldability have been demanded for building of large container ships.High strength steel plates with heavy gauge of EH36,EH40 and EH47 grades were developed by optimizing chemical compositions and TMCP process parameters.Micro alloying elements of Ti and Nb were added to the three steel grades for enhancing the strength and toughness of base plates.The strength of base plates of the EH47 grade was further enhanced with the help of the increased amount of substitutional solid solutes,such as manganese,copper,nickel,or chromium.EH36 steel plates for high heat input over 550 kJ/cm were manufactured by improving thermal stability of TiN particles for better weld heat-affected zone toughness.Thermally stabilized TiN particles effectively suppress grain growth at weld heat-affected zone,leading to better toughness.These steel plates showed excellent mechanical properties of base plates and welded joints.展开更多
基金financial support from the National Natural Science Foundation of China(Grant No.11572159).
文摘The cavity characteristics in liquid-filled containers caused by high-velocity impacts represent an important area of research in hydrodynamic ram phenomena.The dynamic expansion of the cavity induces liquid pressure variations,potentially causing catastrophic damage to the container.Current studies mainly focus on non-deforming projectiles,such as fragments,with limited exploration of shaped charge jets.In this paper,a uniquely experimental system was designed to record cavity profiles in behind-armor liquid-filled containers subjected to shaped charge jet impacts.The impact process was then numerically reproduced using the explicit simulation program ANSYS LS-DYNA with the Structured Arbitrary Lagrangian-Eulerian(S-ALE)solver.The formation mechanism,along with the dimensional and shape evolution of the cavity was investigated.Additionally,the influence of the impact kinetic energy of the jet on the cavity characteristics was analyzed.The findings reveal that the cavity profile exhibits a conical shape,primarily driven by direct jet impact and inertial effects.The expansion rates of both cavity length and maximum radius increase with jet impact kinetic energy.When the impact kinetic energy is reduced to 28.2 kJ or below,the length-to-diameter ratio of the cavity ultimately stabilizes at approximately 7.
文摘The population growth in Ghana has assumed an alarming rate.The provision of urban infrastructure and housing has however not been commensurate with the demand especially in housing,thus the acute housing deficit.The idea of using shipping containers as a building component is by no means new in the Accra Metropolis as most shipping containers are re-constructed architecturally and used for temporary accommodation needs like storage,make-shift shops,emergency shelters and site offices.The concept of using these shipping containers as modular building components in architecture however,is still foreign to building practitioners and the nation at large.This research paper set out to use the containers not for luxury apartments but to harness the merits of availability,low-cost of resource,speed of construction and structural stability of the International Standard Organization(ISO)shipping containers in addressing the housing deficiency problem in the nation by meeting the basic need of shelter.Based on the hypothesis of being a cheaper alternative to the concrete and sand-crete blocks,which is the main construction technology used now,similar house types of both technologies were compared to ascertain the variation as part of the methodology for this research.The methodology also included literature reviews and case studies.The scope of this study was limited to 2-bedroom single-storey and multi-storey house types in Accra,the capital city of Ghana.In the final analysis however,this research proved that the container house is not cheaper than the traditional blockwork and concrete construction method is and is better used in temporary accommodation,in situations where time is essential.
基金supported by“Regional Innovation Strategy(RIS)”through the National Research Foundation of Korea(NRF)funded by the Ministry of Education(MOE)(2023RIS-009).
文摘In a cloud environment,graphics processing units(GPUs)are the primary devices used for high-performance computation.They exploit flexible resource utilization,a key advantage of cloud environments.Multiple users share GPUs,which serve as coprocessors of central processing units(CPUs)and are activated only if tasks demand GPU computation.In a container environment,where resources can be shared among multiple users,GPU utilization can be increased by minimizing idle time because the tasks of many users run on a single GPU.However,unlike CPUs and memory,GPUs cannot logically multiplex their resources.Additionally,GPU memory does not support over-utilization:when it runs out,tasks will fail.Therefore,it is necessary to regulate the order of execution of concurrently running GPU tasks to avoid such task failures and to ensure equitable GPU sharing among users.In this paper,we propose a GPU task execution order management technique that controls GPU usage via time-based containers.The technique seeks to ensure equal GPU time among users in a container environment to prevent task failures.In the meantime,we use a deferred processing method to prevent GPU memory shortages when GPU tasks are executed simultaneously and to determine the execution order based on the GPU usage time.As the order of GPU tasks cannot be externally adjusted arbitrarily once the task commences,the GPU task is indirectly paused by pausing the container.In addition,as container pause/unpause status is based on the information about the available GPU memory capacity,overuse of GPU memory can be prevented at the source.As a result,the strategy can prevent task failure and the GPU tasks can be experimentally processed in appropriate order.
基金supported by the National Natural Science Foundation of China(Grant Nos.12102480,52278543 and 51978660)Natural Science Foundation of Jiangsu Province(Grant No.BK20231489)。
文摘Liquid-filled containers(LFC)are widely used to store and transport petroleum,chemical reagents,and other resources.As an important target of military strikes and terrorist bombings,LFC are vulnerable to blast waves and fragments.To explore the protective effect of polyurea elastomer on LFC,the damage characteristics of polyurea coated liquid-filled container(PLFC)under the combined loading of blast shock wave and fragments were studied experimentally.The microstructure of the polyurea layer was observed by scanning electron microscopy,and the fracture and self-healing phenomena were analyzed.The simulation approach was used to explain the combined blast-and fragments-induced on the PLFC in detail.Finally,the effects of shock wave and fragment alone and in combination on the damage of PLFC were comprehensively compared.Results showed that the polyurea reduces the perforation rate of the fragment to the LFC,and the self-healing phenomenon could also reduce the liquid loss rate inside the container.The polyurea reduces the degree of depression in the center of the LFC,resulting in a decrease in the distance between adjacent fragments penetrating the LFC,and an increase in the probability of transfixion and fracture between holes.Under the close-in blast,the detonation shock wave reached the LFC before the fragment.Polyurea does not all have an enhanced effect on the protection of LFC.The presence of internal water enhances the anti-blast performance of the container,and the hydrodynamic ram(HRAM)formed by the fragment impacting the water aggravated the plastic deformation of the container.The combined action has an enhancement effect on the deformation of the LFC.The depth of the container depression was 27%higher than that of the blast shock wave alone;thus,it cannot be simply summarized as linear superposition.
基金the financial support from the National Natural Science Foundation of China(Grant No.11572159)。
文摘The impact of high-velocity penetrators into liquid-filled containers can generate hydrodynamic ram effects,potentially causing catastrophic structural damage to the container.Previous studies have primarily focused on undeformed penetrators,such as fragments or bullets,with limited attention directed toward shaped charge jets.This study investigates the penetration characteristics of shaped charge jets impacting behind-armor liquid-filled containers,with particular emphasis on jet-liquid interactions.A theoretical penetration model incorporating material compressibility and jet stretching was developed based on the virtual origin theory.A high-speed imaging experimental system was designed to capture the jet motion within the container.The impact process was numerically reproduced using ANSYS/LSDYNA,and the effects of standoff and overmatch on jet penetration were analyzed.The results reveal that jet stretching induced by increased standoff enhances the penetration velocity of the jet.A proportional relationship between the stretching factor(λ)and the overmatch parameter(I)was identified,withλranging from approximately 1.22 to 1.38 times I across the studied standoff range(80-220 mm).The findings offer a basis for future studies on the pressure distribution in the liquid and the structural response of containers.
文摘Virtualization is an indispensable part of the cloud for the objective of deploying different virtual servers over the same physical layer.However,the increase in the number of applications executing on the repositories results in increased overload due to the adoption of cloud services.Moreover,the migration of applications on the cloud with optimized resource allocation is a herculean task even though it is employed for minimizing the dilemma of allocating resources.In this paper,a Fire Hawk Optimization enabled Deep Learning Scheme(FHOEDLS)is proposed for minimizing the overload and optimizing the resource allocation on the hybrid cloud container architecture for migrating interoperability based applications This FHOEDLS achieves the load prediction through the utilization of deep CNN-GRU-AM model for attaining resource allocation and better migration of applications.It specifically adopted the Fire Hawk Optimization Algorithm(FHOA)for optimizing the parameters that influence the factors that aid in better interoperable application migration with improved resource allocation and minimized overhead.It considered the factors of resource capacity,transmission cost,demand,and predicted load into account during the formulation of the objective function utilized for resource allocation and application migration.The cloud simulation of this FHOEDLS is achieved using a container,Virtual Machine(VM),and Physical Machine(PM).The results of this proposed FHOEDLS confirmed a better resource capability of 0.418 and a minimized load of 0.0061.
基金supported by Youth Foundation for Research of the Waterborne Transportation Institute.
文摘Structural properties of the ship container logistics network of China(SCLNC)are studied in the light of recent investigations of complex networks.SCLNC is composed of a set of routes and ports located along the sea or river.Network properties including the degree distribution,degree correlations,clustering,shortest path length,centrality and betweenness are studied in different definition of network topology.It is found that geographical constraint plays an important role in the network topology of SCLNC.We also study the traffic flow of SCLNC based on the weighted network representation,and demonstrate the weight distribution can be described by power law or exponential function depending on the assumed definition of network topology.Other features related to SCLNC are also investigated.
基金supported in part by Natural Science Foundation of Hubei Province of China under Grant 2023AFB016the 2022 Opening Fund for Hubei Key Laboratory of Intelligent Vision Based Monitoring for Hydroelectric Engineering under Grant 2022SDSJ02the Construction Fund for Hubei Key Laboratory of Intelligent Vision Based Monitoring for Hydroelectric Engineering under Grant 2019ZYYD007.
文摘Images and videos play an increasingly vital role in daily life and are widely utilized as key evidentiary sources in judicial investigations and forensic analysis.Simultaneously,advancements in image and video processing technologies have facilitated the widespread availability of powerful editing tools,such as Deepfakes,enabling anyone to easily create manipulated or fake visual content,which poses an enormous threat to social security and public trust.To verify the authenticity and integrity of images and videos,numerous approaches have been proposed,which are primarily based on content analysis and their effectiveness is susceptible to interference from various image or video post-processing operations.Recent research has highlighted the potential of file containers analysis as a promising forensic approach that offers efficient and interpretable results.However,there is still a lack of review articles on this kind of approach.In order to fill this gap,we present a comprehensive review of file containers-based image and video forensics in this paper.Specifically,we categorize the existing methods into two distinct stages,qualitative analysis and quantitative analysis.In addition,an overall framework is proposed to organize the exiting approaches.Then,the advantages and disadvantages of the schemes used across different forensic tasks are provided.Finally,we outline the trends in this research area,aiming to provide valuable insights and technical guidance for future research.
文摘Container-based virtualization technology has been more widely used in edge computing environments recently due to its advantages of lighter resource occupation, faster startup capability, and better resource utilization efficiency. To meet the diverse needs of tasks, it usually needs to instantiate multiple network functions in the form of containers interconnect various generated containers to build a Container Cluster(CC). Then CCs will be deployed on edge service nodes with relatively limited resources. However, the increasingly complex and timevarying nature of tasks brings great challenges to optimal placement of CC. This paper regards the charges for various resources occupied by providing services as revenue, the service efficiency and energy consumption as cost, thus formulates a Mixed Integer Programming(MIP) model to describe the optimal placement of CC on edge service nodes. Furthermore, an Actor-Critic based Deep Reinforcement Learning(DRL) incorporating Graph Convolutional Networks(GCN) framework named as RL-GCN is proposed to solve the optimization problem. The framework obtains an optimal placement strategy through self-learning according to the requirements and objectives of the placement of CC. Particularly, through the introduction of GCN, the features of the association relationship between multiple containers in CCs can be effectively extracted to improve the quality of placement.The experiment results show that under different scales of service nodes and task requests, the proposed method can obtain the improved system performance in terms of placement error ratio, time efficiency of solution output and cumulative system revenue compared with other representative baseline methods.
基金National Natural Science Foundation of ChinaNo.72174035+5 种基金The National Key Research and Development ProjectNo.2023YFB4302200111 Project of ChinaNo.B20082The Talent Planning in DalianNo.2022RG05。
文摘The evolution mechanism of railway transportation network nodes driven by sea-rail intermodal transport(SRIT),a globally prevalent logistics method,has not been thoroughly investigated.From the perspective of SRIT,this study constructed a framework for understanding the evolution of railway container transport network nodes using Northeast China from 2013 to 2020 as a case study.It leverages proprietary data from 95306 Railway Freight E-commerce Platform.By employing the hybrid EWM-GA-TOPSIS model,complex network analysis,modified gravity model,and correlation and regression analyses,this study delves into the spatiotemporal patterns and dynamic transformations of railway container freight stations(RCFS).Finally,the long-term relationship between the RCFS and SRIT is explored.The results indicate that the spatial and temporal analysis of the RCFS in Northeast China from 2013 to 2020 revealed a clear polarisation trend,with the top-ranked stations mainly concentrated near ports and important transportation hubs.Additionally,the RCFS exhibited an expansionary trend;however,its development was uneven,and there was a significant increase in the number of new stations compared to abandoned stations,indicating an overall positive growth tendency.Moreover,the intensity of the SRIT at the RCFS in Northeast China notably increased.A significant positive linear relationship exists between SRIT and the freight capacity of all stations.A relatively pronounced correlation was observed for high-intensity stations,whereas a relatively weak correlation was observed for low-intensity stations.This study not only provides an effective framework for future research on RCFS within the context of SRIT but also serves as a scientific reference for promoting the implementation of the national strategy for multimodal transportation.
基金supported by National Natural Science Foundation of China(No.62073212)Shanghai Science and Technology Commission(No.23ZR1426600).
文摘Automated guided vehicles(AGVs)are key equipment in automated container terminals(ACTs),and their operational efficiency can be impacted by conflicts and battery swapping.Additionally,AGVs have bidirectional transportation capabilities,allowing them tomove in the opposite directionwithout turning around,which helps reduce transportation time.This paper aims at the problem of AGV scheduling and bidirectional conflict-free routing with battery swapping in automated terminals.A bi-level mixed integer programming(MIP)model is proposed,taking into account task assignment,bidirectional conflict-free routing,and battery swapping.The upper model focuses on container task assignment and AGV battery swapping planning,while the lower model ensures conflict-free movement of AGVs.A double-threshold battery swapping strategy is introduced,allowing AGVs to utilize waiting time for loading for battery swapping.An improved differential evolution variable neighborhood search(IDE-VNS)algorithm is developed to solve the bi-level MIP model,aiming to minimize the completion time of all jobs.Experimental results demonstrate that compared to the differential evolution(DE)algorithm and the genetic algorithm(GA),the IDEVNS algorithmreduces fitness values by 44.49% and 45.22%,though it does increase computation time by 56.28% and 62.03%,respectively.Bidirectional transportation reduces the fitness value by an average of 10.97% when the container scale is small.As the container scale increases,the fitness value of bidirectional transportation gradually approaches that of unidirectional transportation.The results further show that the double-threshold battery swapping strategy enhances AGV utilization and reduces the fitness value.
基金Supported by National Key Technology R&D Program during the 11th Five-year Plan Period(2006BAD32B01)~~
文摘[Objective] The experiment was aimed to select effective and economical media for container seedling of triploid clones of Populus tomentosa that was carried out. [Method] The sandy loam, peat, perlite, vermiculite, riversand, sludge were taken as media of hardwood cutting and survival rate, seedling height were taken as indexes to select media for container seedling of triploid clones of Populus tomentosa. [Result] Different mixedmedia had great influence on survival rates of container seedlings. Taking peat and vermiculite with the proportion of 5∶2 (M10) or peat ,vermiculite with the proportion of 7∶2 (M11) or sandy loam (M1) as media would generate higher cutting survival rate that was higher than 90.0%. There were significant differece in height increments of container seedlings. Taking sandy loam, peat and vermiculite with the proportion of 6∶2∶2(M5)or sandy loam (M1), seedling height of 60-days the seedling was over 37.0 cm. [Conclusion] According to cost analysis of nursery medium, the optimum medium for hardwood cuttings container seedling-raising of triploid clones of Populus tomentosa was sandy loam.
文摘The objective of this study was to evaluate the influence of infusion container design on the volume of residual drug solution following use in a clinical setting. 0.9% （w/v） NaCl infusion solution containers （5 types, each of three capacities： 100 mL, 250 mL and 500 mL） following clinical use for in-patients at Peking University Third Hospital were collected during Sept. and Oct. 2007. The volume of residual drug solution was determined. Hospital pharmacy records were used to determine the potential economic implications of discarding residual drug solutions. The mean residual volumes ranged from 0.38 mL to 4.80 mL and, in general, residual volume increased with increasing container capacity. The residual volumes for one type of double-port soft bag were significantly lower than the residual volumes for all other containers of the same capacity （P〈0.05）, including glass and semi-rigid plastic bottles. Highest residual volumes were observed for the single-port soft bag. Estimates of the value of discarded residual drug solution ranged from approximately US $15,000 to US $150,000 per annum in our hospital. Infusion container design has a major influence on residual drug solution volumes following intravenous infusion. Appropriate choice of bag design remains an important consideration for the economics and efficacy of infusion treatment in Chinese hospitals.
基金Supported by Forestry Science and Technology Program of Hunan Province(2010-06)~~
文摘In order to improve the survival rate of planting seedlings of Phoebe zhen-nan, the grading standard for one-year-old container seedlings of Phoebe zhennan was developed by using cluster analysis. The results showed that the quality of Phoebe zhennan container seedlings could be estimated from seedling height and ground diameter. The Phoebe zhennan container seedlings were divided into 3 grades： Grade 1 （seedling height ≥ 38 cm; ground diameter ≥ 0.65 cm）, Grade 2 （31.7 cm ≤ seedling height 〈 38 cm; 0.56 cm ≤ ground diameter 〈 0.65 cm） and Grade 3 （seedling height 〈 31.7 cm; ground diameter 〈 0.56 cm）.
基金The National Key Technology R&D Program of China during the 11th Five-Year Plan Period(No.2006BAH02A06)
文摘The similarities and differences between the container terminal logistics system(CTLS)and the Harvard-architecture computer system are compared in terms of organization and architecture.The mapping relation and the modeling framework of the CTLS are presented based on multi-agent,and the successful algorithms in the computer domain are applied to the modeling framework,such as the dynamic priority and multilevel feedback scheduling algorithm.In addition,a model and simulation on a certain quay at Shanghai harbor is built up on the AnyLogic platform to support the decision-making of terminal on service cost.It validates the feasibility and creditability of the above systematic methodology.
基金Supported by Natural Science Foundation of Hubei Province(2012FFC03101)~~
文摘[Objective] This study aimed to investigate the optimal component of culti- vation medium for container seedling raising of Camellia oleifera. [Method] In the application of container nursery technology of Camellia oleifera grafting in emergent stocks, yellow clay soil, surface soil of pine forest, decomposed edible fungus, peat soil, dung and dirt were mixed by different proportions into five formulae as nursery substrates, with garden soil as the control, in order to investigate the influences of various substrates on the growth of annual Camellia oleifera container seedlings by using randomized block design based on variance analysis and multiple comparisons, and to screen the optimal substrate formula for container nursery of Camellia oleifera. [Result] The influences of different substrates on the transplanting survival rate, seedling height, basal diameter, height-diameter ratio and lateral root length of Camellia oleifera container seedlings were significantly different. Various growth indi- cators of Camellia oleifera container seedlings cultivated in the substrate containing 40% of yellow clay soil ＋ 15% of surface soil of pine forest ＋ 20% of decomposed edible fungus ＋ 20% of peat soil ＋ 5% of dung and dirt exceeded that of the control and other substrate formulae, which could be used as the optimal substrate formula for the container nursery of Camellia oleifera. [Conclusion] This study screened the optimal substrate formula for the container nursery of Camellia oleifera, which provided technical reference for the cultivation of Camellia oleifera container seedlings.
文摘The teaching design is based on the task of "Container Transport" in the course of"English for International Shipping Business", aiming to discuss Design of information teaching in Business English Class. MOSO TEACH, CFNET platform,Cartoon have been applied in the design. Informationalized teaching has brought the vividness and dramatic effect to the knowledgebased class.
基金the National Natural Science Foundation of China(No.71101090)the Shanghai Top Academic Discipline Project-Management Science&Engineering,the Shanghai Municipal Education Commission Project(Nos.12ZZ148,13YZ080 and 14YZ112)+1 种基金the Ministry of Transport Research Projects(No.2012-329-810-180)the Shanghai Maritime University Research Project(Nos.20120102 and 20110019)
文摘An efcient approach for yard crane(YC)scheduling is proposed in this paper.The definition of task group for YC scheduling is proposed.A mixed integer programming(MIP)model is developed.In the model,objective functions are subject to the minimization of the total delay of complete time for all task groups and the minimization of block-to-block movements of YCs.Due to the computational scale of the non-deterministic polynomial(NP)complete problem regarding YC scheduling,a rolling-horizon decision-making strategy is employed to solve this problem,by converting the MIP model into another MIP model in the scheduling of each rolling period.Afterwards,a heuristic algorithm based on modified A*search is developed to solve the converted model and obtain near optimal solution.Finally,the computational experiments are used to examine the performance of the proposed approach for YC scheduling.
文摘Heavy thickness steel plates with a good combination of strength,toughness and weldability have been demanded for building of large container ships.High strength steel plates with heavy gauge of EH36,EH40 and EH47 grades were developed by optimizing chemical compositions and TMCP process parameters.Micro alloying elements of Ti and Nb were added to the three steel grades for enhancing the strength and toughness of base plates.The strength of base plates of the EH47 grade was further enhanced with the help of the increased amount of substitutional solid solutes,such as manganese,copper,nickel,or chromium.EH36 steel plates for high heat input over 550 kJ/cm were manufactured by improving thermal stability of TiN particles for better weld heat-affected zone toughness.Thermally stabilized TiN particles effectively suppress grain growth at weld heat-affected zone,leading to better toughness.These steel plates showed excellent mechanical properties of base plates and welded joints.
