Warm rotary draw bending provides a feasible method to form the large-diameter thin-walled（LDTW）TC4 bent tubes, which are widely used in the pneumatic system of aircrafts. An accurate prediction of flow behavior of ...Warm rotary draw bending provides a feasible method to form the large-diameter thin-walled（LDTW）TC4 bent tubes, which are widely used in the pneumatic system of aircrafts. An accurate prediction of flow behavior of TC4 tubes considering the couple effects of temperature,strain rate and strain is critical for understanding the deformation behavior of metals and optimizing the processing parameters in warm rotary draw bending of TC4 tubes. In this study, isothermal compression tests of TC4 tube alloy were performed from 573 to 873 K with an interval of 100 K and strain rates of 0.001, 0.010 and0.100 s^（-1）. The prediction of flow behavior was done using two constitutive models, namely modified Arrhenius model and artificial neural network（ANN） model. The predictions of these constitutive models were compared using statistical measures like correlation coefficient（R）, average absolute relative error（AARE） and its variation with the deformation parameters（temperature, strain rate and strain）. Analysis of statistical measures reveals that the two models show high predicted accuracy in terms of R and AARE. Comparatively speaking, the ANN model presents higher predicted accuracy than the modified Arrhenius model. In addition, the predicted accuracy of ANN model presents high stability at the whole deformation parameter ranges, whereas the predictability of the modified Arrhenius model has some fluctuation at different deformation conditions. It presents higher predicted accuracy at temperatures of 573-773 K, strain rates of 0.010-0.100 s^（-1）and strain of 0.04-0.32, while low accuracy at temperature of 873 K, strain rates of 0.001 s^（-1）and strain of 0.36-0.48.Thus, the application of modified Arrhenius model is limited by its relatively low predicted accuracy at some deformation conditions, while the ANN model presents very high predicted accuracy at all deformation conditions,which can be used to study the compression behavior of TC4 tube at the temperature range of 573-873 K and the strain rate of 0.001-0.100 s^（-1）. It can provide guideline for the design of processing parameters in warm rotary draw bending of LDTW TC4 tubes.展开更多
The application of artificial neural network to predict the ultimate bearing capacity of CFST （ concrete-filled square steel tubes） short columns under axial loading is explored. Input parameters consiste of concret...The application of artificial neural network to predict the ultimate bearing capacity of CFST （ concrete-filled square steel tubes） short columns under axial loading is explored. Input parameters consiste of concrete compressive strength, yield strength of steel tube, confinement index, sectional dimension and width-to-thickness ratio. The ultimate bearing capacity is the only output parameter. A multilayer feedforward neural network is used to describe the nonlinear relationships between the input and output variables. Fifty-five experimental data of CFST short columns under axial loading are used to train and test the neural network. A comparison between the neural network model and three parameter models shows that the neural network model possesses good accuracy and could be a practical method for predicting the ultimate strength of axially loaded CFST short columns.展开更多
This paper introduces a novel robot for outer surface inspection of boiler tubes. The paper describes the hardware system, wireless communication strategy, communication procedure and system software of the robot. The...This paper introduces a novel robot for outer surface inspection of boiler tubes. The paper describes the hardware system, wireless communication strategy, communication procedure and system software of the robot. The WLAN technology is used in the robot. It solves the problem of shielding generated by iron boiler and 11Mbps bandwidth made it possible for video and control stream real-time transmit within the same channel. Though TCP/IP protocol is robust, serial server is a transparent channel but cannot detect error and retransmit the data. In order to improve the reliability of serial communication, a new communication protocol is proposed. Key words boiler tubes - mobile robotics - wireless local area network Project Supported by the National High-Tech Program (Grant No. 2002AA420080)展开更多
Evacuated Tube Transport Technologies （ET3） offers the potential for more than an order of magnitude improvement in transportation efficiency, speed, cost, and effectiveness. An ET3 network may be optimized to susta...Evacuated Tube Transport Technologies （ET3） offers the potential for more than an order of magnitude improvement in transportation efficiency, speed, cost, and effectiveness. An ET3 network may be optimized to sustainably displace most global transportation by car, ship, truck, train, and jet aircraft. To do this, ET3 standards should adhere to certain key principals： maximum value through efficiency, reliability, and simplicity; equal consideration for passenger and cargo loads; optimum size; high speed/high frequency operation; demand oriented; random accessibility; scalability; high granularity; automated control; full speed passive switching; open standards of implementation; and maximum use of existing capacities, materials, and processes.展开更多
随着新能源大规模接入电网,为应对新能源随机性和波动性给互联系统负荷频率控制(Load Frequency Control,LFC)带来的不确定问题,实现新能源电力系统多约束条件下的优化运行,建立了含风电机组的LFC多胞模型,以减少模型参数不确定对控制...随着新能源大规模接入电网,为应对新能源随机性和波动性给互联系统负荷频率控制(Load Frequency Control,LFC)带来的不确定问题,实现新能源电力系统多约束条件下的优化运行,建立了含风电机组的LFC多胞模型,以减少模型参数不确定对控制系统的影响。设计了基于原对偶神经网络(Primal-Dual Neural Network,PDNN)的Tube鲁棒模型预测控制(Tube-Robust Model Predictive Control,Tube-RMPC)策略。将标称模型预测控制器与辅助反馈控制器结合,通过PDNN实时求解标称模型预测控制器以保证为LFC系统产生最优状态轨迹。设计辅助反馈控制器抵消外部干扰,使实际系统的状态维持在以标称轨迹为中心的Tube内。最后,对含风电的三区域负荷频率控制系统进行仿真研究,结果表明所提出的Tube-RMPC控制策略,不仅能够有效提高控制精度,还能增强系统鲁棒性,提高实时优化效率。展开更多
This paper focuses on a very important point which consists in evaluating experimental data prior to their use for chemical process designs. Hexafluoropropylene P, ρ, T data measured at 11 temperatures from 263 to 36...This paper focuses on a very important point which consists in evaluating experimental data prior to their use for chemical process designs. Hexafluoropropylene P, ρ, T data measured at 11 temperatures from 263 to 362 K and at pressures up to 10 MPa have been examined through a consistency test presented herein and based on the use of a methodology implying both neural networks and Virial equation. Such a methodology appears as very powerful to identify erroneous data and could be conveniently handled for quick checks of databases previously to modeling through classical thermodynamic models and equations of state. As an application to liquid and vapor phase densities of hexafluoropropylene, a more reliable database is provided after removing out layer data.展开更多
基金financially supported by the National Natural Science Foundation of China(Nos.51275415 and50905144)the Natural Science Basic Research Plan in Shanxi Province(No.2011JQ6004)the Program of the Ministry of Education of China for Introducing Talents of Discipline to Universities(No.B08040)
文摘Warm rotary draw bending provides a feasible method to form the large-diameter thin-walled（LDTW）TC4 bent tubes, which are widely used in the pneumatic system of aircrafts. An accurate prediction of flow behavior of TC4 tubes considering the couple effects of temperature,strain rate and strain is critical for understanding the deformation behavior of metals and optimizing the processing parameters in warm rotary draw bending of TC4 tubes. In this study, isothermal compression tests of TC4 tube alloy were performed from 573 to 873 K with an interval of 100 K and strain rates of 0.001, 0.010 and0.100 s^（-1）. The prediction of flow behavior was done using two constitutive models, namely modified Arrhenius model and artificial neural network（ANN） model. The predictions of these constitutive models were compared using statistical measures like correlation coefficient（R）, average absolute relative error（AARE） and its variation with the deformation parameters（temperature, strain rate and strain）. Analysis of statistical measures reveals that the two models show high predicted accuracy in terms of R and AARE. Comparatively speaking, the ANN model presents higher predicted accuracy than the modified Arrhenius model. In addition, the predicted accuracy of ANN model presents high stability at the whole deformation parameter ranges, whereas the predictability of the modified Arrhenius model has some fluctuation at different deformation conditions. It presents higher predicted accuracy at temperatures of 573-773 K, strain rates of 0.010-0.100 s^（-1）and strain of 0.04-0.32, while low accuracy at temperature of 873 K, strain rates of 0.001 s^（-1）and strain of 0.36-0.48.Thus, the application of modified Arrhenius model is limited by its relatively low predicted accuracy at some deformation conditions, while the ANN model presents very high predicted accuracy at all deformation conditions,which can be used to study the compression behavior of TC4 tube at the temperature range of 573-873 K and the strain rate of 0.001-0.100 s^（-1）. It can provide guideline for the design of processing parameters in warm rotary draw bending of LDTW TC4 tubes.
文摘The application of artificial neural network to predict the ultimate bearing capacity of CFST （ concrete-filled square steel tubes） short columns under axial loading is explored. Input parameters consiste of concrete compressive strength, yield strength of steel tube, confinement index, sectional dimension and width-to-thickness ratio. The ultimate bearing capacity is the only output parameter. A multilayer feedforward neural network is used to describe the nonlinear relationships between the input and output variables. Fifty-five experimental data of CFST short columns under axial loading are used to train and test the neural network. A comparison between the neural network model and three parameter models shows that the neural network model possesses good accuracy and could be a practical method for predicting the ultimate strength of axially loaded CFST short columns.
文摘This paper introduces a novel robot for outer surface inspection of boiler tubes. The paper describes the hardware system, wireless communication strategy, communication procedure and system software of the robot. The WLAN technology is used in the robot. It solves the problem of shielding generated by iron boiler and 11Mbps bandwidth made it possible for video and control stream real-time transmit within the same channel. Though TCP/IP protocol is robust, serial server is a transparent channel but cannot detect error and retransmit the data. In order to improve the reliability of serial communication, a new communication protocol is proposed. Key words boiler tubes - mobile robotics - wireless local area network Project Supported by the National High-Tech Program (Grant No. 2002AA420080)
文摘Evacuated Tube Transport Technologies （ET3） offers the potential for more than an order of magnitude improvement in transportation efficiency, speed, cost, and effectiveness. An ET3 network may be optimized to sustainably displace most global transportation by car, ship, truck, train, and jet aircraft. To do this, ET3 standards should adhere to certain key principals： maximum value through efficiency, reliability, and simplicity; equal consideration for passenger and cargo loads; optimum size; high speed/high frequency operation; demand oriented; random accessibility; scalability; high granularity; automated control; full speed passive switching; open standards of implementation; and maximum use of existing capacities, materials, and processes.
文摘随着新能源大规模接入电网,为应对新能源随机性和波动性给互联系统负荷频率控制(Load Frequency Control,LFC)带来的不确定问题,实现新能源电力系统多约束条件下的优化运行,建立了含风电机组的LFC多胞模型,以减少模型参数不确定对控制系统的影响。设计了基于原对偶神经网络(Primal-Dual Neural Network,PDNN)的Tube鲁棒模型预测控制(Tube-Robust Model Predictive Control,Tube-RMPC)策略。将标称模型预测控制器与辅助反馈控制器结合,通过PDNN实时求解标称模型预测控制器以保证为LFC系统产生最优状态轨迹。设计辅助反馈控制器抵消外部干扰,使实际系统的状态维持在以标称轨迹为中心的Tube内。最后,对含风电的三区域负荷频率控制系统进行仿真研究,结果表明所提出的Tube-RMPC控制策略,不仅能够有效提高控制精度,还能增强系统鲁棒性,提高实时优化效率。
文摘This paper focuses on a very important point which consists in evaluating experimental data prior to their use for chemical process designs. Hexafluoropropylene P, ρ, T data measured at 11 temperatures from 263 to 362 K and at pressures up to 10 MPa have been examined through a consistency test presented herein and based on the use of a methodology implying both neural networks and Virial equation. Such a methodology appears as very powerful to identify erroneous data and could be conveniently handled for quick checks of databases previously to modeling through classical thermodynamic models and equations of state. As an application to liquid and vapor phase densities of hexafluoropropylene, a more reliable database is provided after removing out layer data.
