In this paper the main technical data of the high speed camera(HSFC-PRO),components of gas triggered switch and the primary experimental results of the breakdown of gas triggered switch using high speed camera are int...In this paper the main technical data of the high speed camera(HSFC-PRO),components of gas triggered switch and the primary experimental results of the breakdown of gas triggered switch using high speed camera are introduced.Four photographs totaling in 24 nanoseconds in single trigger mode manifest that the breakdown consists of two phases,which are the breakdowns of the trigger electrode with positive and negative electrode successively. This phenomenon is consist with the electric field distribution simulation result with the help of the software ANSYS. Eight photographs in double trigger mode prove that the breakdown time of the gas triggered switch is above 10.5 microseconds.The elementary results show that high speed camera is a very efficient apparatus to study the discharge characteristics.This optical measuring technique is helpful to profoundly study the breakdown of high voltage switch. More studies and experiments would be continued in future.展开更多
Triggered spark-gap switch is a popular discharge switch for pulse power systems.Previous studies have focused on planarizing this switch using thin film techniques in order to meet the requirements of compact size in...Triggered spark-gap switch is a popular discharge switch for pulse power systems.Previous studies have focused on planarizing this switch using thin film techniques in order to meet the requirements of compact size in the systems.Such switches are one-shot due to electrodes being too thin to sufficiently resist spark-erosion.Additionally,these switches did not employ any structures in securing internal gas composition,resulting in inconsistent performance under harsh atmospheres.In this work,a novel planar triggered spark-gap switch(PTS)with a hermetically sealed cavity was batched-prepared with printed circuit board(PCB)technology,to achieve reusability with low cost.The proposed PTS was inspected by micro-computed tomography to ensure PCB techniques meet the requirements of machining precision.The results from electrical experiments demonstrated that PCB PTS were consistent and reusable with lifespan over 20 times.The calculated switch voltage and circuit current were consistent with those derived from real-world measurements.Finally,PCB PTS was used to introduce hexanitrostilbene(HNS)pellets in a pulse power system to verify its performance.展开更多
Triggering characteristics of triggered vacuum switch （TVS）, including the discharge delay time, delay jitter, range of operational voltage and peak of pulsed current, are investigated. Both structure and experiment...Triggering characteristics of triggered vacuum switch （TVS）, including the discharge delay time, delay jitter, range of operational voltage and peak of pulsed current, are investigated. Both structure and experimental circuit of TVS are presented. The results indicate that TVS, as a surface flashover triggering device with high dielectric permittivity material, is with excellent triggering characteristics. When the hold-off voltage reaches 120 kV, the minimum operational voltage is 1.3 kV, and the minimum discharge delay time and jitter are 100 ns and ±10 ns, respectively. The peak current is up to 240 kA when the operational voltage reaches 100 kV. TVS can well satisfy the main demands of high voltage and current applications, and can also be used under a multi-crowbar circuit.展开更多
The characteristics of the triggered vacuum switch （TVS） are obviously influenced by the emission current ie and emission charge of the trigger device. In this paper, an RC charge collector is designed, and the char...The characteristics of the triggered vacuum switch （TVS） are obviously influenced by the emission current ie and emission charge of the trigger device. In this paper, an RC charge collector is designed, and the characteristics of emission current ie and collecting charge Qc of the trigger device are studied. The experimental results indicate that the emission current ie which is produced by the initial plasma has both positive and negative components, and the polarity of the emission current ie depends mainly on the polarity of the bias voltage UBias. The emission current ie and collecting charge Qe increase with the increase of the trigger voltage Utr and the bias voltage UBias. The emission efficient r] increases linearly with the increase of the bias voltage UBias. When the gap distance is 15 mm and bias voltage UBias is 160 V and trigger voltage Utr is 2.6 kV, the emission efficiency r/reaches 6%展开更多
A trigger device and a triggered pseudospark switch （TPSS） were designed based on surface flashover technology, in order to meet the requirements from present pulse power technology and pulse current test technology...A trigger device and a triggered pseudospark switch （TPSS） were designed based on surface flashover technology, in order to meet the requirements from present pulse power technology and pulse current test technology such as a long lifetime, reliability in a wide voltage range, a short delay time, as well as small delay jitters. The trigger devices were made from different dielectric materials, with their permittivities from tens to thousands. The trigger characteristics of TPSS were investigated. The results indicate that the high-dielectric trigger device shows better performance and higher emitted charge of the electron emission within all adjusted parameters including the gas pressure and applied voltage. For the dielectric material with relative permittivity εr of 3460, when the gas pressure is 7 Pa, the hold-off voltage of TPSS is 28 kV, the minimum trigger switch voltage drops to 128 V, the minimum discharging delay time and delay jitter are less than 35ns and 6ns, respectively, and the reliable operation can be reached within a very large range of charging voltage, between 0.46% and 99% of its self-breakdown voltage.展开更多
A crowbar impulse current circuit for testing the switch-type surge protective device （SPD） is presented. The crowbar circuit consists of a computer control circuit, a trigger voltage pulse generator, a main dischar...A crowbar impulse current circuit for testing the switch-type surge protective device （SPD） is presented. The crowbar circuit consists of a computer control circuit, a trigger voltage pulse generator, a main discharging switch, and a crowbar pseudospark switch. The active trigger technology was studied in the crowbar impulse current circuit. The circuit monitors the main discharging current and generates a trigger signal at a proper time for the crowbar pseudospark switch operation. The trigger characteristics of the main discharge switch and the crowbar pseu- dospark switch were investigated. By monitoring the preset applied capacitor voltage, the gap distance of the main discharging switch could be adjusted to ensure a discharging delay time less than 2 μs. Equipped with a surface ttashover trigger device made of high relative perimittivity dielectric material BaTiO3 （εr = 3460）, the discharge delay time of the crowbar pseudospark switch is less than 85 ns, and the minimum operating voltage is less than 1% of its self-breakdown voltage. With a storage capacitor of 9 μF , an inductor of 18 μH and a crowbar pseudospark switch, a load of 30 mΩ and an applied capacitor voltage of 40 kV, an impulse current waveform of maximum 25 kA was generated with a rise time and time to half peak value of 17.2 μs and 336μs respectively.展开更多
The integration method of exploding foil initiator system(EFIs) used to be researched to broaden its application range in military and aerospace in the last few decades.In order to lower the firing voltage below 1 kV,...The integration method of exploding foil initiator system(EFIs) used to be researched to broaden its application range in military and aerospace in the last few decades.In order to lower the firing voltage below 1 kV,an integrated EFIs with enhanced energy efficiency was designed.Corresponding exploding foil initiator chips were fabricated in batch via micro electromechanical systems technology by integrating a unified foil,a flyer layer and a barrel on a glass substrate successively,meanwhile its package of the whole system was proposed at a volume of 2.194 cm^(3).The structural parameters were determined by predicted performance including flyer velocity,impact behavior and conduction property via the proposed theoretical models and the static electric field simulation.As expect,this integrated EFIs exhibited excellent functions,which could accelerate the flyer to a terminal velocity over 4 km/s and preeminently initiate HNS-IV pellet at a circuit of 0.24 μF/0.9 kV.Furthermore,the theoretical design,fabrication and performance test have been all included to validate the feasibility of this integrated EFIs that was beneficial for its commercial development in the future.展开更多
Characteristics of electron emission induced by a surface flashover trigger device in a low-pressure trigger switch were investigated. A test method to measure the emitted charges from the trigger device was developed...Characteristics of electron emission induced by a surface flashover trigger device in a low-pressure trigger switch were investigated. A test method to measure the emitted charges from the trigger device was developed, and the factors affecting the emitted charges were analyzed. The results indicated that the major emitted charges from the trigger device were induced by surface plasma generated by surface flashover occurring on the trigger dielectric material. The emitted charges and the peak emission current increased linearly with the change in the trigger voltage and bias voltage. The emitted charges collected from the anode were affected by the gap distance. However, the emitted charges were less affected by the anode diameter. Furthermore, the emitted charges and the peak emission current decreased rapidly with the increase in gas pressure in a range from 0 Pa to 100 Pa, and then remained stable or changed slightly when the increase in gas pressure up to 2400 Pa.展开更多
Structure of main air discharging switch and a crowbar TVS （triggered vacuum switch） are designed and their triggering characteristics are investigated. The experimental results showed that for TVS the operating vol...Structure of main air discharging switch and a crowbar TVS （triggered vacuum switch） are designed and their triggering characteristics are investigated. The experimental results showed that for TVS the operating voltage range is from 1.3 kV to 120 kV, its maximum delay time is 400 ns and its jitter is 4-10 ns. Based on these results the crowbar 10/350μs （i.e., with a front time of 10μs and a duration of 350 μs） pulse current circuit and its controlling circuit are designed. With a 10μF stored capacitor C and a 6 μF waveform forming induction, a pulse current is generated with a maximum of 100 kA, front time of 10 ns and duration of 350μs. This pulse waveform can be used for testing SPD （surge protective devices）.展开更多
High-power precise delay trigger/ignition system is a programmable pulse generator developed for experiment controlling in explosively driven magnetic flux compression generators. Precise delay pulses are generated by...High-power precise delay trigger/ignition system is a programmable pulse generator developed for experiment controlling in explosively driven magnetic flux compression generators. Precise delay pulses are generated by the digital circuit, after being magnified and sharpened through multistage isolated amplifiers and rising edge sharpening device, high-voltage steep delay pulses with precision less than μs level are obtained. This system has been used in our compact magnetic flux compression generator experiments in place of the traditional primaeord delay device.展开更多
Triggered vacuum switches(TVSs)have fast growing applications in the field of power system and pulse power.The relation between triggering parameters of triggering system,such as triggering voltage and triggering powe...Triggered vacuum switches(TVSs)have fast growing applications in the field of power system and pulse power.The relation between triggering parameters of triggering system,such as triggering voltage and triggering power,between the triggering time delay and its scatter of TVS had been obtained through series of experiments.The result can be adopted as the steering for high-power controller design and application of TVS.A steepened high-voltage triggering pulse is introduced in the main high-voltage generating circuit.As a result,the triggering time delay and its scatter can be decreased remarkably.Synchronous switch technology is imported to control the triggering phase at the crest of applied voltage on TVS.The Triggering characteristic of TVS under alternating current(AC)and direct current(DC)load has been investigated emphatically.Given the identical triggering parameter of triggering system,DC condition is prior to AC on the triggering probability and stability markedly.Such conclusion can be drawn,for AC condition,TVS would require much for the triggering system.展开更多
文摘In this paper the main technical data of the high speed camera(HSFC-PRO),components of gas triggered switch and the primary experimental results of the breakdown of gas triggered switch using high speed camera are introduced.Four photographs totaling in 24 nanoseconds in single trigger mode manifest that the breakdown consists of two phases,which are the breakdowns of the trigger electrode with positive and negative electrode successively. This phenomenon is consist with the electric field distribution simulation result with the help of the software ANSYS. Eight photographs in double trigger mode prove that the breakdown time of the gas triggered switch is above 10.5 microseconds.The elementary results show that high speed camera is a very efficient apparatus to study the discharge characteristics.This optical measuring technique is helpful to profoundly study the breakdown of high voltage switch. More studies and experiments would be continued in future.
基金We gratefully acknowledge support from the Natural Science Foundation of Jiangsu Province of China(Grant No.BK20151486).
文摘Triggered spark-gap switch is a popular discharge switch for pulse power systems.Previous studies have focused on planarizing this switch using thin film techniques in order to meet the requirements of compact size in the systems.Such switches are one-shot due to electrodes being too thin to sufficiently resist spark-erosion.Additionally,these switches did not employ any structures in securing internal gas composition,resulting in inconsistent performance under harsh atmospheres.In this work,a novel planar triggered spark-gap switch(PTS)with a hermetically sealed cavity was batched-prepared with printed circuit board(PCB)technology,to achieve reusability with low cost.The proposed PTS was inspected by micro-computed tomography to ensure PCB techniques meet the requirements of machining precision.The results from electrical experiments demonstrated that PCB PTS were consistent and reusable with lifespan over 20 times.The calculated switch voltage and circuit current were consistent with those derived from real-world measurements.Finally,PCB PTS was used to introduce hexanitrostilbene(HNS)pellets in a pulse power system to verify its performance.
基金supported by the New Century Talent Foundation of Ministry of Education of China (NCET-08-0438)
文摘Triggering characteristics of triggered vacuum switch （TVS）, including the discharge delay time, delay jitter, range of operational voltage and peak of pulsed current, are investigated. Both structure and experimental circuit of TVS are presented. The results indicate that TVS, as a surface flashover triggering device with high dielectric permittivity material, is with excellent triggering characteristics. When the hold-off voltage reaches 120 kV, the minimum operational voltage is 1.3 kV, and the minimum discharge delay time and jitter are 100 ns and ±10 ns, respectively. The peak current is up to 240 kA when the operational voltage reaches 100 kV. TVS can well satisfy the main demands of high voltage and current applications, and can also be used under a multi-crowbar circuit.
基金supported by National Natural Science Foundation of China(No.51177131)the Fundamental Research Funds for the Central Universities of China(No.xjj20100159)
文摘The characteristics of the triggered vacuum switch （TVS） are obviously influenced by the emission current ie and emission charge of the trigger device. In this paper, an RC charge collector is designed, and the characteristics of emission current ie and collecting charge Qc of the trigger device are studied. The experimental results indicate that the emission current ie which is produced by the initial plasma has both positive and negative components, and the polarity of the emission current ie depends mainly on the polarity of the bias voltage UBias. The emission current ie and collecting charge Qe increase with the increase of the trigger voltage Utr and the bias voltage UBias. The emission efficient r] increases linearly with the increase of the bias voltage UBias. When the gap distance is 15 mm and bias voltage UBias is 160 V and trigger voltage Utr is 2.6 kV, the emission efficiency r/reaches 6%
文摘A trigger device and a triggered pseudospark switch （TPSS） were designed based on surface flashover technology, in order to meet the requirements from present pulse power technology and pulse current test technology such as a long lifetime, reliability in a wide voltage range, a short delay time, as well as small delay jitters. The trigger devices were made from different dielectric materials, with their permittivities from tens to thousands. The trigger characteristics of TPSS were investigated. The results indicate that the high-dielectric trigger device shows better performance and higher emitted charge of the electron emission within all adjusted parameters including the gas pressure and applied voltage. For the dielectric material with relative permittivity εr of 3460, when the gas pressure is 7 Pa, the hold-off voltage of TPSS is 28 kV, the minimum trigger switch voltage drops to 128 V, the minimum discharging delay time and delay jitter are less than 35ns and 6ns, respectively, and the reliable operation can be reached within a very large range of charging voltage, between 0.46% and 99% of its self-breakdown voltage.
文摘A crowbar impulse current circuit for testing the switch-type surge protective device （SPD） is presented. The crowbar circuit consists of a computer control circuit, a trigger voltage pulse generator, a main discharging switch, and a crowbar pseudospark switch. The active trigger technology was studied in the crowbar impulse current circuit. The circuit monitors the main discharging current and generates a trigger signal at a proper time for the crowbar pseudospark switch operation. The trigger characteristics of the main discharge switch and the crowbar pseu- dospark switch were investigated. By monitoring the preset applied capacitor voltage, the gap distance of the main discharging switch could be adjusted to ensure a discharging delay time less than 2 μs. Equipped with a surface ttashover trigger device made of high relative perimittivity dielectric material BaTiO3 （εr = 3460）, the discharge delay time of the crowbar pseudospark switch is less than 85 ns, and the minimum operating voltage is less than 1% of its self-breakdown voltage. With a storage capacitor of 9 μF , an inductor of 18 μH and a crowbar pseudospark switch, a load of 30 mΩ and an applied capacitor voltage of 40 kV, an impulse current waveform of maximum 25 kA was generated with a rise time and time to half peak value of 17.2 μs and 336μs respectively.
基金National Natural Science Foundation of China (Grant No.11872013) to provide fund for conducting experiments。
文摘The integration method of exploding foil initiator system(EFIs) used to be researched to broaden its application range in military and aerospace in the last few decades.In order to lower the firing voltage below 1 kV,an integrated EFIs with enhanced energy efficiency was designed.Corresponding exploding foil initiator chips were fabricated in batch via micro electromechanical systems technology by integrating a unified foil,a flyer layer and a barrel on a glass substrate successively,meanwhile its package of the whole system was proposed at a volume of 2.194 cm^(3).The structural parameters were determined by predicted performance including flyer velocity,impact behavior and conduction property via the proposed theoretical models and the static electric field simulation.As expect,this integrated EFIs exhibited excellent functions,which could accelerate the flyer to a terminal velocity over 4 km/s and preeminently initiate HNS-IV pellet at a circuit of 0.24 μF/0.9 kV.Furthermore,the theoretical design,fabrication and performance test have been all included to validate the feasibility of this integrated EFIs that was beneficial for its commercial development in the future.
基金supported by the New Century Talent Foundation of Ministry of Education of China (NCET-08-0438)
文摘Characteristics of electron emission induced by a surface flashover trigger device in a low-pressure trigger switch were investigated. A test method to measure the emitted charges from the trigger device was developed, and the factors affecting the emitted charges were analyzed. The results indicated that the major emitted charges from the trigger device were induced by surface plasma generated by surface flashover occurring on the trigger dielectric material. The emitted charges and the peak emission current increased linearly with the change in the trigger voltage and bias voltage. The emitted charges collected from the anode were affected by the gap distance. However, the emitted charges were less affected by the anode diameter. Furthermore, the emitted charges and the peak emission current decreased rapidly with the increase in gas pressure in a range from 0 Pa to 100 Pa, and then remained stable or changed slightly when the increase in gas pressure up to 2400 Pa.
基金supported by the New Century Talent Foundation of Ministry of Education of China (NCET-08-0438)
文摘Structure of main air discharging switch and a crowbar TVS （triggered vacuum switch） are designed and their triggering characteristics are investigated. The experimental results showed that for TVS the operating voltage range is from 1.3 kV to 120 kV, its maximum delay time is 400 ns and its jitter is 4-10 ns. Based on these results the crowbar 10/350μs （i.e., with a front time of 10μs and a duration of 350 μs） pulse current circuit and its controlling circuit are designed. With a 10μF stored capacitor C and a 6 μF waveform forming induction, a pulse current is generated with a maximum of 100 kA, front time of 10 ns and duration of 350μs. This pulse waveform can be used for testing SPD （surge protective devices）.
基金the Ministerial Level Advanced Research Foundation(40407010305)
文摘High-power precise delay trigger/ignition system is a programmable pulse generator developed for experiment controlling in explosively driven magnetic flux compression generators. Precise delay pulses are generated by the digital circuit, after being magnified and sharpened through multistage isolated amplifiers and rising edge sharpening device, high-voltage steep delay pulses with precision less than μs level are obtained. This system has been used in our compact magnetic flux compression generator experiments in place of the traditional primaeord delay device.
基金This work was carried out under the support of Guangxi Key Laboratory of Manufacturing System and Advanced Manufacturing Technology(No.0842006_025_Z).
文摘Triggered vacuum switches(TVSs)have fast growing applications in the field of power system and pulse power.The relation between triggering parameters of triggering system,such as triggering voltage and triggering power,between the triggering time delay and its scatter of TVS had been obtained through series of experiments.The result can be adopted as the steering for high-power controller design and application of TVS.A steepened high-voltage triggering pulse is introduced in the main high-voltage generating circuit.As a result,the triggering time delay and its scatter can be decreased remarkably.Synchronous switch technology is imported to control the triggering phase at the crest of applied voltage on TVS.The Triggering characteristic of TVS under alternating current(AC)and direct current(DC)load has been investigated emphatically.Given the identical triggering parameter of triggering system,DC condition is prior to AC on the triggering probability and stability markedly.Such conclusion can be drawn,for AC condition,TVS would require much for the triggering system.
