Large-angle stimulated Raman scattering(LA-SRS)in a longitudinally inhomogeneous plasma with a transverse density modulation is studied using a three-wave coupled model and numerical simulations.The simulations show t...Large-angle stimulated Raman scattering(LA-SRS)in a longitudinally inhomogeneous plasma with a transverse density modulation is studied using a three-wave coupled model and numerical simulations.The simulations show that the scattering angle of SRS in a longitudinally inhomogeneous plasma can be significantly affected by transverse density modulation.Under transverse density modulation conditions,the laser focuses into underdense regions,owing to the transversely modulated refractive index.The angle of LA-SRS,neither a purely 90° angle side scattering nor purely backscattering,is almost consistent with the specific angle at which the density inhomogeneity vanishes.In modulated plasmas,the nonuniform distribution of laser intensity shifts the regions of scattering and gain compared with those in uniform plasmas,ultimately affecting the laser transmission.SRS is suppressed in weakly modulated regimes,whereas it is enhanced under strong modulation conditions,and a theoretical criterion distinguishing between strong and weak modulation is established.展开更多
A scheme based on irregular V-shaped silicon nanoantennas is proposed to optimize transverse unidirectional scattering under plane wave irradiation.Traditional methods of designing regular shapes offer fewer parameter...A scheme based on irregular V-shaped silicon nanoantennas is proposed to optimize transverse unidirectional scattering under plane wave irradiation.Traditional methods of designing regular shapes offer fewer parameters and higher search efficiency.However,due to the limitations of regular shapes,it is challenging to meet high-precision design requirements.Irregular shape design allows for a broader range of adjustments,but the complexity of shape parameters leads to lower search efficiency and a higher likelihood of converging to local optima.展开更多
Precise transverse emittance assessment in electron beams is crucial for advancing high-brightness beam injectors.As opposed to intricate methodologies that use specialized devices,quadrupole focusing strength scannin...Precise transverse emittance assessment in electron beams is crucial for advancing high-brightness beam injectors.As opposed to intricate methodologies that use specialized devices,quadrupole focusing strength scanning(Q-scanning)techniques offer notable advantages for various injectors owing to their inherent convenience and cost-effectiveness.However,their stringent approximation conditions lead to inevitable errors in practical operation,thereby limiting their widespread application.This study addressed these challenges by revisiting the analytical derivation procedure and investigating the effects of the underlying approximation conditions.Preliminary corrections were explored through a combination of data processing analysis and numerical simulations.Furthermore,based on theoretical derivations,virtual measurements using beam dynamics calculations were employed to evaluate the correction reliability.Subsequent experimental validations were performed at the Huazhong University of Science and Technology injector to verify the effectiveness of the proposed compensation method.Both the virtual and experimental results confirm the feasibility and reliability of the enhanced Q-scanning-based diagnosis for transverse emittance in typical beam injectors operating under common conditions.Through the integration of these corrections and compensations,enhanced Q-scanning-based techniques emerge as promising alternatives to traditional emittance diagnosis methods.展开更多
BACKGROUND Liposarcomas(LPSs)are malignant mesenchymal tumors originating from adipocytes.Myxoid LPS(MLPS),a common subtype,predominantly arises in the extremities,retroperitoneum,and deep soft tissues,with a rare occ...BACKGROUND Liposarcomas(LPSs)are malignant mesenchymal tumors originating from adipocytes.Myxoid LPS(MLPS),a common subtype,predominantly arises in the extremities,retroperitoneum,and deep soft tissues,with a rare occurrence in the gastrointestinal tract.Primary mesenteric LPS is particularly uncommon,especially in the transverse colonic mesentery.CASE SUMMARY This report describes the case of a 65-year-old female patient who presented with abdominal distension and was diagnosed with a giant mucinous LPS of the transverse colonic mesentery.Upon admission,the patient underwent a comprehensive evaluation.Contrast-enhanced computed tomography(CT)of the chest and abdomen revealed a large malignant tumor with aortic dissection,while colonoscopy identified rectal cancer.Given the patient's condition and surgical risk,an interventional procedure was first performed to manage the aortic coarctation,followed by tumor resection via laparotomy.Intraoperative and histopathological findings confirmed a giant mucinous LPS originating from the transverse colon mesentery.Postoperatively,the patient underwent chemotherapy and regular follow-up CT.Although the rectal tumor did not recur,the mesenteric tumor showed extensive recurrence,compressing the intestinal lumen and causing mechanical obstruction,which severely threatened the patient's life.A second operation temporarily relieved the obstructive symptoms;however,it had a limited effect on tumor progression.The patient died four months later due to disease progression.CONCLUSION While no standardized treatment exists for MLPS co-occurring with multiple diseases,operation remains the mainstay.However,recurrence,metastasis,and poor postoperative prognosis continue to pose serious threats to patient survival.展开更多
Precipitation of carbides, nitrides, and carbonitrides is an important factor influencing the formation of surface transverse cracks in the continuous casting of microalloyed steel, affecting the quality and yield of ...Precipitation of carbides, nitrides, and carbonitrides is an important factor influencing the formation of surface transverse cracks in the continuous casting of microalloyed steel, affecting the quality and yield of the final product. Based on previous investigation, the precipitation sequence and temperature, position and mode, as well as the size, morphology, and number of different types of precipitates were reviewed. The effects of C, N, Nb, Ti, and V on the precipitation behavior and surface transverse cracks in continuous casting slabs were summarized, with a particular emphasis on the new achievements concerning Ti addition. The critical amounts of different elements to avoid serious surface cracks during continuous casting were proposed. The control mechanisms and industrial effects of composition optimization, cooling design, and chamfered mold configuration to improve surface transverse cracks in continuous casting slabs were also illustrated, and the recent application of surface microstructure control technology was emphasized. The characteristics, advantages, and shortcomings of existing theoretical and experimental methods in investigating continuous casting surface cracks regarding precipitation are finally discussed, and a new setup with advanced functions is introduced.展开更多
We theoretically investigate the feasibility of reconstructing the transverse structures of femtosecond laser filaments in air by photoacoustic tomography.To simulate the emission and transmission of filament-induced ...We theoretically investigate the feasibility of reconstructing the transverse structures of femtosecond laser filaments in air by photoacoustic tomography.To simulate the emission and transmission of filament-induced ultrasonic signals more truly,a series of experimentally recorded cross-sectional images are used to simulate the initial pressure rise from multiple filaments(MFs).The aperture size and sensitivity of the detector was incorporated into the reconstruction algorithm.The results show that frequency of acoustic signals induced by MFs with maximum volumetric energy density~100 k J/m^(3)is about 2 MHz below.The initial spatial distribution of optical filaments can be clearly reconstructed with the back projection based algorithm.We recommend a PAT system with transducers of a lower central frequency and a stronger apodization working at a longer scanning radius can be used in photoacoustic image reconstruction of femtosecond laser multifilaments.This study demonstrates the feasibility of using photoacoustic tomography to reconstruct femtosecond multifilament images,which is helpful for studying the complex dynamic processes of multifilament and multifilament manipulation and is also valuable for the remote applications of laser filaments.展开更多
demand for faster vessels continues to grow,various high speed vessels have been designed and constructed for military,recreational,and passenger use.Planing vessels,specifically engineered for high-speed travel,requi...demand for faster vessels continues to grow,various high speed vessels have been designed and constructed for military,recreational,and passenger use.Planing vessels,specifically engineered for high-speed travel,require optimization to improve their hydrodynamic performance and stability during design.Reducing resistance and improving longitudinal stability are key challenges in the design of high-speed vessels.Various methods are employed to overcome these challenges,with the use of a transverse step being one of the most common approaches.This study explores the effect of changing the angle of the aft-wise step and incorporates these changes into existing analytical formulas,resulting in new formulas specifically for high-speed vessels equipped with aft-wise steps.This research investigates how the angle of the transverse step affects the hydrodynamic performance and longitudinal stability of high-speed vessels.Based on the results,analytical formulas have been developed to calculate the wetted surface parameters of vessels equipped with an aft-wise transverse step.The study used experimental methods to analyze the vessel's behavior with six different aft-wise transverse step angles of 0°,9°,11°,13°,15°,and 17°at three speeds of 8,10,and 12 m/s.In the experimental tests,the hydrodynamic components of resistance,trim angle,and wetted surface of the vessel were measured.Results indicate that creating an angle in the transverse step substantially improves the hydrodynamic components and longitudinal stability of the vessel.At the optimal angle,the resistance and trim angle of the vessel were reduced by 7.8%and 12.8%,respectively,compared to the base vessel.Additionally,the existing analytical methods for calculating the wetted surface area are more accurate than similar methods.展开更多
Bowel obstruction is a frequent reason for hospital admissions and can be categorized into small or large,partial or complete obstructions.While small bowel obstructions occur more often,large bowel obstructions accou...Bowel obstruction is a frequent reason for hospital admissions and can be categorized into small or large,partial or complete obstructions.While small bowel obstructions occur more often,large bowel obstructions account for 20%-25%of all cases,primarily aff ecting elderly patients.[1]Malignancy is the leading cause of large bowel obstruction and is responsible for 50%-60%of cases.Other causes include idiopathic,volvulus,infl ammatory,hernia,adhesion,intussusception,endometriosis,and functional colon disorders.[1]Colonic volvulus is the third most common cause of large bowel obstruction.Most cases of colonic volvulus occur in the sigmoid(60%-70%)and cecum(25%-40%)regions.[2]In contrast,transverse colon volvulus(TCV)is rare,accounting for less than 3%of large bowel obstructions.[3]This condition has a high mortality rate of 18%-33%,predominantly due to delayed diagnosis and the absence of characteristic radiological findings.[3-5]This case report presents a rare instance of TCV obstruction in a 19-year-old patient from Mankweng Academic Hospital.展开更多
This study systematically investigated the Lean Blowoff(LBO)limits of Two-Dimensional(2D)bluff-body stabilized premixed flames by varying the air mass flow rate,inflowtemperature,bluff-body width,and fuel type.The dat...This study systematically investigated the Lean Blowoff(LBO)limits of Two-Dimensional(2D)bluff-body stabilized premixed flames by varying the air mass flow rate,inflowtemperature,bluff-body width,and fuel type.The data of LBO limits were analyzed and fittedaccording to the Damk?hler(Da)and Reynolds(Re)numbers,and the fitting accuracy of LBO datawas highly improved by a modified characteristic length simultaneously considering the length andwidth of the bluff body,which is usually neglected in the previous studies.Moreover,to our knowl-edge,this is the first time that simultaneous transverse and spanwise OH*-Chemiluminescence(CL)imaging has been performed to examine the three-dimensional behavior of the LBO process.The flame stability is heavily affected by the mass and energy transport between reactants andproducts in both directions,potentially leading to the flame pinch-off.The intensity and positionof the upstream flame after pinch-off are decisive to the occurrence of the following LBO.Whenthe upstream flame after pinch-off is weak and close to the bluff body,it cannot re-ignite thedownstream unburnt gas.Subsequently,a permanent downstream extinction occurs,and theLBO takes place.The results help understand the LBO mechanism of 2D bluff-body stabilizedflames.展开更多
To meticulously dissect the cracking issue in the transverse diaphragm concrete,situated at the anchor point of a colossal large-span,single cable plane cable-stayed bridge,this research paper adopts an innovative lay...To meticulously dissect the cracking issue in the transverse diaphragm concrete,situated at the anchor point of a colossal large-span,single cable plane cable-stayed bridge,this research paper adopts an innovative layered modeling analysis methodology for numerical simulations.The approach is structured into three distinct layers,each tailored to address specific aspects of the cracking phenomenon.The foundational first layer model operates under the assumption of linear elasticity,adhering to the Saint Venant principle.It narrows its focus to the crucial zone between the Bp20 transverse diaphragm and the central axis of pier 4’s support,encompassing the critically cracked diaphragm beneath the N1 cable anchor.This layer provides a preliminary estimate of potential cracking zones within the concrete,serving as a baseline for further analysis.The second layer model builds upon this foundation by incorporating material plasticity into its considerations.It pinpoints its investigation to the immediate vicinity of the cracked transverse diaphragm associated with the N1 cable,aiming to capture the intricate material behavior under stress.This layer’s predictions of crack locations and patterns exhibit a remarkable alignment with actual detection results,confirming its precision and reliability.The third and most intricate layer delves deep into the heart of the matter,examining the cracked transverse diaphragm precisely where the cable force attains its maximum intensity.By leveraging advanced extended finite element technology,this layer offers an unprecedented level of detail in tracing the progression of concrete cracks.Its findings reveal a close correlation between predicted and observed crack widths,validating the model’s proficiency in simulating real-world cracking dynamics.Crucially,the boundary conditions for each layer are meticulously aligned with those of the overarching model,ensuring consistency and integrity throughout the analysis.These results not only enrich our understanding of the cracking mechanisms but also underscore the efficacy of reinforcing cracked concrete sections with external steel plates.In conclusion,this study represents a significant contribution to the field of bridge engineering,offering both theoretical insights and practical solutions for addressing similar challenges.展开更多
The complex flow characteristics of transverse jet in high-speed crossflow involve several separation regions and multiple shock waves,which make it difficult to capture and precisely predict the flow field state in r...The complex flow characteristics of transverse jet in high-speed crossflow involve several separation regions and multiple shock waves,which make it difficult to capture and precisely predict the flow field state in real time merely by relying on traditional approaches.With the rapid advancement of deep learning technology,its powerful data processing capability offers a fast method for the prediction of the transverse jet flow field.Consequently,a prediction model based on deep learning is established,with the aim of obtaining the flow characteristics of a transverse jet under different freestream and jet conditions.This study segments the complex grid into several individual grids and trains them independently.The trained model can successfully establish the nonlinear mapping relationship between the transverse jet flow field and the input parameters.The prediction accuracy of the established model for the wall pressure under different conditions exceeds 99%,and the established model is also capable of reproducing structures such as shock waves and recirculation zones in the overall flow field,thereby achieving highly precise and efficient prediction of the jet structure and flow information.The results suggest that in contrast to the traditional numerical simulation,this deep learning model demonstrates greater efficiency in predicting the transverse jet flow field.展开更多
Current breast reconstruction evaluations mostly focus on static cosmetic analysis as a measure of the clinical outcomes.Moreover,it is essential to consider the dynamic changes in the reconstructed breast alongside a...Current breast reconstruction evaluations mostly focus on static cosmetic analysis as a measure of the clinical outcomes.Moreover,it is essential to consider the dynamic changes in the reconstructed breast alongside assessments of aesthetic symmetry,functional restoration,complication rates,and long-term stability of the reconstruction.This study aimed to assess the mobility of the reconstructed breast following various breast reconstruction techniques,specifically by comparing deep inferior epigastric perforator(DIEP) flaps and pedicled transverse rectus abdominis musculocutaneous(TRAM) flaps.We conducted a longitudinal case study to investigate the changes in breast movement resulting from different surgical interventions.The comparison showed that DIEP flap reconstruction was more likely to achieve superior breast mobility outcomes than TRAM flap reconstruction.For a better breast aesthetic outcome,it is fundamental to improve the awareness of the dynamic evaluation of the reconstructed breast at the surgical strategy level.展开更多
The mechanical properties of bedding rock in cold regions are frequently affected by freeze-thaw(F-T)cycles and ani-sotropy.Research on the mechanical characteristics of rock damage under the combined action of F-T an...The mechanical properties of bedding rock in cold regions are frequently affected by freeze-thaw(F-T)cycles and ani-sotropy.Research on the mechanical characteristics of rock damage under the combined action of F-T and bedding angles is limited,and most traditional rock damage models cannot accurately capture these characteristics.We performed axial compression tests to ex-plore the strength characteristics of bedding slates at the bedding angles ofβ=0°,30°,45°,60°,and 90°under various F-T cycles.The experimental findings suggest that the elastic modulus and uniaxial compressive strength of the slate declined exponentially as the number of F-T cycles increased.Axial compressive strength was characterized by a U-shaped tendency with the bedding angle.This study proposes a damage model for the uniaxial compressive strength of transversely isotropic rock,which integrates the F-T effect,utilizing the enhanced anisotropic Hoek-Brown strength criterion and a statistical damage model.This model was validated using experimental data.This statistical damage model can precisely capture the dual attributes of rock mass strength reduction with F-T cy-cles and variations arising from the loading direction.展开更多
Understanding the effects of point liquid loading on transversely isotropic poroelastic media is crucial for advancing geomechanics and biomechanics, where precise modeling of fluid-structure interactions is essential...Understanding the effects of point liquid loading on transversely isotropic poroelastic media is crucial for advancing geomechanics and biomechanics, where precise modeling of fluid-structure interactions is essential. This paper presents a comprehensive analysis of infinite transversely isotropic poroelasticity under a fluid source, based on Biot's theory, aiming to uncover new and previously unexplored insights in the literature. We begin our study by deriving a general solution for fluid-saturated, transversely isotropic poroelastic materials in terms of harmonic functions that satisfy sixth-order homogeneous partial differential equations, using potential theory and Almansi's theorem. Based on these general solutions and potential functions, we construct a Green's function for a point fluid source, introducing three new harmonic functions with undetermined constants. These constants are determined by enforcing continuity and equilibrium conditions. Substituting these into the general solution yields fundamental solutions for poroelasticity that provide crucial support for a wide range of project problems. Numerical results and comparisons with existing literature are provided to illustrate physical mechanisms through contour plots. Our observations reveal that all components tend to zero in the far field and become singular at the concentrated source. Additionally, the contours exhibit rapid changes near the point fluid source but display gradual variations at a distance from it. These findings highlight the intricate behavior of the system under point liquid loading, offering valuable insights for further research and practical applications.展开更多
Natural soil generally exhibits significant transverse isotropy(TI)due to weathering and sedimentation,meaning that horizontal moduli differ from their vertical counterpart.The TI mechanical model is more appropriate ...Natural soil generally exhibits significant transverse isotropy(TI)due to weathering and sedimentation,meaning that horizontal moduli differ from their vertical counterpart.The TI mechanical model is more appropriate for actual situations.Although soil exhibits material nonlinearity under earthquake excitation,existing research on the TI medium is limited to soil linearity and neglects the nonlinear response of TI sites.A 2D equivalent linear model for a layered TI half-space subjected to seismic waves is derived in the transformed wave number domain using the exact dynamic stiffness matrix of the TI medium.This study introduces a method for determining the effective shear strain of TI sites under oblique wave incidence,and further describes a systematic study on the effects of TI parameters and soil nonlinearity on site responses.Numerical results indicate that seismic responses of the TI medium significantly differ from those of isotropic sites and that the responses are highly dependent on TI parameters,particularly in nonlinear cases,while also being sensitive to incident angle and excitation intensity.Moreover,the differences in peak acceleration and waveform for various TI materials may also be amplified due to the strong nonlinearity.The study provides valuable insights for improving the accuracy of seismic response analysis in engineering applications.展开更多
We present an assumed enhanced strain finite element framework for the simulation of tensile fracturing processes in transversely isotropic rocks.Fractures along the weak bedding planes and through the anisotropic roc...We present an assumed enhanced strain finite element framework for the simulation of tensile fracturing processes in transversely isotropic rocks.Fractures along the weak bedding planes and through the anisotropic rock matrix are treated with distinct enrichment,and a recently proposed dualmechanism tensile failure criterion for transversely isotropic rocks is adopted to determine crack initiation for the two failure modes.The cohesive crack model is adopted to characterize the response of embedded cracks.As for the numerical implementation of the proposed framework,both algorithms for the update of local history variables at Gauss points and of the global finite element system are derived.Four boundary-value problem simulations are carried out with the proposed framework,including uniaxial tension tests of Argillite,pre-notched square loaded in tension,three-point bending tests on Longmaxi shale,and simulations of tensile cracks induced by a strip load around a tunnel in transversely isotropic rocks.Simulation results reveal that the proposed framework can properly capture the tensile strength anisotropy and the anisotropic evolution of tensile cracks in transversely isotropic rocks.展开更多
In this editorial,we comment on an article by Liao et al published in the current issue of the World Journal of Diabetes.We focus on the clinical significance of tibial transverse transport(TTT)as an effective treatme...In this editorial,we comment on an article by Liao et al published in the current issue of the World Journal of Diabetes.We focus on the clinical significance of tibial transverse transport(TTT)as an effective treatment for patients with diabetic foot ulcers(DFU).TTT has been associated with tissue regeneration,improved blood circulation,reduced amputation rates,and increased expression of early angiogenic factors.Mechanistically,TTT can influence macrophage polarization and growth factor upregulation.Despite this potential,the limitations and conflicting results of existing studies justify the need for further research into its optimal application and development.These clinical implications highlight the efficacy of TTT in recalcitrant DFU and provide lasting stimuli for tissue re-generation,and blood vessel and bone marrow improvement.Immunomodu-lation via systemic responses contributes to its therapeutic potential.Future studies should investigate the underlying molecular mechanisms to enhance our understanding and the efficacy of TTT.This manuscript emphasizes the potential of TTT in limb preservation and diabetic wound healing and suggests avenues for preventive measures against limb amputation in diabetes and peripheral artery disease.Here,we highlight the clinical significance of the TTT and its importance in healing DFU to promote the use of this technique in tissue regeneration.展开更多
The magnetic flux in a permanent magnet transverse flux generator(PMTFG) is three-dimensional(3D), therefore, its efficacy is evaluated using 3D magnetic field analysis. Although the 3D finite-element method(FEM) is h...The magnetic flux in a permanent magnet transverse flux generator(PMTFG) is three-dimensional(3D), therefore, its efficacy is evaluated using 3D magnetic field analysis. Although the 3D finite-element method(FEM) is highly accurate and reliable for machine simulation, it requires a long computation time, which is crucial when it is to be used in an iterative optimization process. Therefore, an alternative to 3DFEM is required as a rapid and accurate analytical technique. This paper presents an analytical model for PMTFG analysis using winding function method. To obtain the air gap MMF distribution, the excitation magneto-motive force(MMF) and the turn function are determined based on certain assumptions. The magnetizing inductance, flux density, and back-electro-magnetomotive force of the winding are then determined. To assess the accuracy of the proposed method, the analytically calculated parameters of the generator are compared to those obtained by a 3D-FEM. The presented method requires significantly shorter computation time than the 3D-FEM with comparable accuracy.展开更多
BACKGROUND Ostomy is a common surgery usually performed to protect patients from clinical symptoms caused by distal anastomotic leakage after colorectal cancer(CRC)surgery and perforation or to relieve intestinal obst...BACKGROUND Ostomy is a common surgery usually performed to protect patients from clinical symptoms caused by distal anastomotic leakage after colorectal cancer(CRC)surgery and perforation or to relieve intestinal obstruction.AIM To analyze the complications after transverse colostomy closure.METHODS Patients who underwent transverse colostomy closure from Jan 2015 to Jan 2022 were retrospectively enrolled in a single clinical center.The differences between the complication group and the no complication group were compared.Logistic regression analyses were conducted to find independent factors for overall complications or incision infection.RESULTS A total of 102 patients who underwent transverse colostomy closure were enrolled in the current study.Seventy(68.6%)patients underwent transverse colostomy because of CRC related causes.Postoperative complications occurred in 30(29.4%)patients and the most frequent complication occurring after transverse colostomy closure was incision infection(46.7%).The complication group had longer hospital stays(P<0.01).However,no potential risk factors were identified for overall complications and incision infection.CONCLUSION The most frequent complication occurring after transverse colostomy closure surgery in our center was incision infection.The operation time,interval from transverse colostomy to reversal,and method of anastomosis might have no impact on the postoperative complications.Surgeons should pay more attention to aseptic techniques.展开更多
Seismic prediction of cracks is of great significance in many disciplines,for which the rock physics model is indispensable.However,up to now,multitudinous analytical models focus primarily on the cracked rock with th...Seismic prediction of cracks is of great significance in many disciplines,for which the rock physics model is indispensable.However,up to now,multitudinous analytical models focus primarily on the cracked rock with the isotropic background,while the explicit model for the cracked rock with the anisotropic background is rarely investigated in spite of such case being often encountered in the earth.Hence,we first studied dependences of the crack opening displacement tensors on the crack dip angle in the coordinate systems formed by symmetry planes of the crack and the background anisotropy,respectively,by forty groups of numerical experiments.Based on the conclusion from the experiments,the analytical solution was derived for the effective elastic properties of the rock with the inclined penny-shaped cracks in the transversely isotropic background.Further,we comprehensively analyzed,according to the developed model,effects of the crack dip angle,background anisotropy,filling fluid and crack density on the effective elastic properties of the cracked rock.The analysis results indicate that the dip angle and background anisotropy can significantly either enhance or weaken the anisotropy degrees of the P-and SH-wave velocities,whereas they have relatively small effects on the SV-wave velocity anisotropy.Moreover,the filling fluid can increase the stiffness coefficients related to the compressional modulus by reducing crack compliance parameters,while its effects on shear coefficients depend on the crack dip angle.The increasing crack density reduces velocities of the dry rock,and decreasing rates of the velocities are affected by the crack dip angle.By comparing with exact numerical results and experimental data,it was demonstrated that the proposed model can achieve high-precision estimations of stiffness coefficients.Moreover,the assumption of the weakly anisotropic background results in the consistency between the proposed model and Hudson's published theory for the orthorhombic rock.展开更多
基金supported by the National Natural Science Foundation of China under Grant Nos.U2430207,12035002,and 12305258by the CAEP Foundation under Grant No.YZJJZQ2023020.
文摘Large-angle stimulated Raman scattering(LA-SRS)in a longitudinally inhomogeneous plasma with a transverse density modulation is studied using a three-wave coupled model and numerical simulations.The simulations show that the scattering angle of SRS in a longitudinally inhomogeneous plasma can be significantly affected by transverse density modulation.Under transverse density modulation conditions,the laser focuses into underdense regions,owing to the transversely modulated refractive index.The angle of LA-SRS,neither a purely 90° angle side scattering nor purely backscattering,is almost consistent with the specific angle at which the density inhomogeneity vanishes.In modulated plasmas,the nonuniform distribution of laser intensity shifts the regions of scattering and gain compared with those in uniform plasmas,ultimately affecting the laser transmission.SRS is suppressed in weakly modulated regimes,whereas it is enhanced under strong modulation conditions,and a theoretical criterion distinguishing between strong and weak modulation is established.
基金supported by the National Natural Science Foundation of China(Nos.62475121 and 62335012)。
文摘A scheme based on irregular V-shaped silicon nanoantennas is proposed to optimize transverse unidirectional scattering under plane wave irradiation.Traditional methods of designing regular shapes offer fewer parameters and higher search efficiency.However,due to the limitations of regular shapes,it is challenging to meet high-precision design requirements.Irregular shape design allows for a broader range of adjustments,but the complexity of shape parameters leads to lower search efficiency and a higher likelihood of converging to local optima.
基金supported by the National Natural Science Foundation of China(Nos.12341501 and 11905074)。
文摘Precise transverse emittance assessment in electron beams is crucial for advancing high-brightness beam injectors.As opposed to intricate methodologies that use specialized devices,quadrupole focusing strength scanning(Q-scanning)techniques offer notable advantages for various injectors owing to their inherent convenience and cost-effectiveness.However,their stringent approximation conditions lead to inevitable errors in practical operation,thereby limiting their widespread application.This study addressed these challenges by revisiting the analytical derivation procedure and investigating the effects of the underlying approximation conditions.Preliminary corrections were explored through a combination of data processing analysis and numerical simulations.Furthermore,based on theoretical derivations,virtual measurements using beam dynamics calculations were employed to evaluate the correction reliability.Subsequent experimental validations were performed at the Huazhong University of Science and Technology injector to verify the effectiveness of the proposed compensation method.Both the virtual and experimental results confirm the feasibility and reliability of the enhanced Q-scanning-based diagnosis for transverse emittance in typical beam injectors operating under common conditions.Through the integration of these corrections and compensations,enhanced Q-scanning-based techniques emerge as promising alternatives to traditional emittance diagnosis methods.
基金Supported by The Shandong Natural Science Foundation of China,No.ZR2021QH046.
文摘BACKGROUND Liposarcomas(LPSs)are malignant mesenchymal tumors originating from adipocytes.Myxoid LPS(MLPS),a common subtype,predominantly arises in the extremities,retroperitoneum,and deep soft tissues,with a rare occurrence in the gastrointestinal tract.Primary mesenteric LPS is particularly uncommon,especially in the transverse colonic mesentery.CASE SUMMARY This report describes the case of a 65-year-old female patient who presented with abdominal distension and was diagnosed with a giant mucinous LPS of the transverse colonic mesentery.Upon admission,the patient underwent a comprehensive evaluation.Contrast-enhanced computed tomography(CT)of the chest and abdomen revealed a large malignant tumor with aortic dissection,while colonoscopy identified rectal cancer.Given the patient's condition and surgical risk,an interventional procedure was first performed to manage the aortic coarctation,followed by tumor resection via laparotomy.Intraoperative and histopathological findings confirmed a giant mucinous LPS originating from the transverse colon mesentery.Postoperatively,the patient underwent chemotherapy and regular follow-up CT.Although the rectal tumor did not recur,the mesenteric tumor showed extensive recurrence,compressing the intestinal lumen and causing mechanical obstruction,which severely threatened the patient's life.A second operation temporarily relieved the obstructive symptoms;however,it had a limited effect on tumor progression.The patient died four months later due to disease progression.CONCLUSION While no standardized treatment exists for MLPS co-occurring with multiple diseases,operation remains the mainstay.However,recurrence,metastasis,and poor postoperative prognosis continue to pose serious threats to patient survival.
基金supported by the Fundamental Research Funds for the Central Universities(No.FRF-TP-19-017A3)National Natural Science Foundation of China(No.51874026).
文摘Precipitation of carbides, nitrides, and carbonitrides is an important factor influencing the formation of surface transverse cracks in the continuous casting of microalloyed steel, affecting the quality and yield of the final product. Based on previous investigation, the precipitation sequence and temperature, position and mode, as well as the size, morphology, and number of different types of precipitates were reviewed. The effects of C, N, Nb, Ti, and V on the precipitation behavior and surface transverse cracks in continuous casting slabs were summarized, with a particular emphasis on the new achievements concerning Ti addition. The critical amounts of different elements to avoid serious surface cracks during continuous casting were proposed. The control mechanisms and industrial effects of composition optimization, cooling design, and chamfered mold configuration to improve surface transverse cracks in continuous casting slabs were also illustrated, and the recent application of surface microstructure control technology was emphasized. The characteristics, advantages, and shortcomings of existing theoretical and experimental methods in investigating continuous casting surface cracks regarding precipitation are finally discussed, and a new setup with advanced functions is introduced.
基金Project supported by the National Natural Science Foundation of China(Grant No.42105176)the National University of Defense Technology Independent Research Project(Grant No.ZK21-40)。
文摘We theoretically investigate the feasibility of reconstructing the transverse structures of femtosecond laser filaments in air by photoacoustic tomography.To simulate the emission and transmission of filament-induced ultrasonic signals more truly,a series of experimentally recorded cross-sectional images are used to simulate the initial pressure rise from multiple filaments(MFs).The aperture size and sensitivity of the detector was incorporated into the reconstruction algorithm.The results show that frequency of acoustic signals induced by MFs with maximum volumetric energy density~100 k J/m^(3)is about 2 MHz below.The initial spatial distribution of optical filaments can be clearly reconstructed with the back projection based algorithm.We recommend a PAT system with transducers of a lower central frequency and a stronger apodization working at a longer scanning radius can be used in photoacoustic image reconstruction of femtosecond laser multifilaments.This study demonstrates the feasibility of using photoacoustic tomography to reconstruct femtosecond multifilament images,which is helpful for studying the complex dynamic processes of multifilament and multifilament manipulation and is also valuable for the remote applications of laser filaments.
文摘demand for faster vessels continues to grow,various high speed vessels have been designed and constructed for military,recreational,and passenger use.Planing vessels,specifically engineered for high-speed travel,require optimization to improve their hydrodynamic performance and stability during design.Reducing resistance and improving longitudinal stability are key challenges in the design of high-speed vessels.Various methods are employed to overcome these challenges,with the use of a transverse step being one of the most common approaches.This study explores the effect of changing the angle of the aft-wise step and incorporates these changes into existing analytical formulas,resulting in new formulas specifically for high-speed vessels equipped with aft-wise steps.This research investigates how the angle of the transverse step affects the hydrodynamic performance and longitudinal stability of high-speed vessels.Based on the results,analytical formulas have been developed to calculate the wetted surface parameters of vessels equipped with an aft-wise transverse step.The study used experimental methods to analyze the vessel's behavior with six different aft-wise transverse step angles of 0°,9°,11°,13°,15°,and 17°at three speeds of 8,10,and 12 m/s.In the experimental tests,the hydrodynamic components of resistance,trim angle,and wetted surface of the vessel were measured.Results indicate that creating an angle in the transverse step substantially improves the hydrodynamic components and longitudinal stability of the vessel.At the optimal angle,the resistance and trim angle of the vessel were reduced by 7.8%and 12.8%,respectively,compared to the base vessel.Additionally,the existing analytical methods for calculating the wetted surface area are more accurate than similar methods.
文摘Bowel obstruction is a frequent reason for hospital admissions and can be categorized into small or large,partial or complete obstructions.While small bowel obstructions occur more often,large bowel obstructions account for 20%-25%of all cases,primarily aff ecting elderly patients.[1]Malignancy is the leading cause of large bowel obstruction and is responsible for 50%-60%of cases.Other causes include idiopathic,volvulus,infl ammatory,hernia,adhesion,intussusception,endometriosis,and functional colon disorders.[1]Colonic volvulus is the third most common cause of large bowel obstruction.Most cases of colonic volvulus occur in the sigmoid(60%-70%)and cecum(25%-40%)regions.[2]In contrast,transverse colon volvulus(TCV)is rare,accounting for less than 3%of large bowel obstructions.[3]This condition has a high mortality rate of 18%-33%,predominantly due to delayed diagnosis and the absence of characteristic radiological findings.[3-5]This case report presents a rare instance of TCV obstruction in a 19-year-old patient from Mankweng Academic Hospital.
基金the financial support of the National Natural Science Foundation of China(Nos.U2141221 and 52076136)the National Science and Technology Major Project,China(Nos.J2019-Ⅲ-0004-0047 and Y2022-Ⅲ-0001-0010)+1 种基金the Center for Basic Science of Aero Engines and Gas Turbines Project,China(No.P2022-B-Ⅱ019-001)the Natural Science Foundation of Shanghai,China(Nos.22ZR1467900 and 23ZR1481400)。
文摘This study systematically investigated the Lean Blowoff(LBO)limits of Two-Dimensional(2D)bluff-body stabilized premixed flames by varying the air mass flow rate,inflowtemperature,bluff-body width,and fuel type.The data of LBO limits were analyzed and fittedaccording to the Damk?hler(Da)and Reynolds(Re)numbers,and the fitting accuracy of LBO datawas highly improved by a modified characteristic length simultaneously considering the length andwidth of the bluff body,which is usually neglected in the previous studies.Moreover,to our knowl-edge,this is the first time that simultaneous transverse and spanwise OH*-Chemiluminescence(CL)imaging has been performed to examine the three-dimensional behavior of the LBO process.The flame stability is heavily affected by the mass and energy transport between reactants andproducts in both directions,potentially leading to the flame pinch-off.The intensity and positionof the upstream flame after pinch-off are decisive to the occurrence of the following LBO.Whenthe upstream flame after pinch-off is weak and close to the bluff body,it cannot re-ignite thedownstream unburnt gas.Subsequently,a permanent downstream extinction occurs,and theLBO takes place.The results help understand the LBO mechanism of 2D bluff-body stabilizedflames.
基金financially supported by National Natural Science Foundation of China(Project No.51878156,received by Wenwei Wang).
文摘To meticulously dissect the cracking issue in the transverse diaphragm concrete,situated at the anchor point of a colossal large-span,single cable plane cable-stayed bridge,this research paper adopts an innovative layered modeling analysis methodology for numerical simulations.The approach is structured into three distinct layers,each tailored to address specific aspects of the cracking phenomenon.The foundational first layer model operates under the assumption of linear elasticity,adhering to the Saint Venant principle.It narrows its focus to the crucial zone between the Bp20 transverse diaphragm and the central axis of pier 4’s support,encompassing the critically cracked diaphragm beneath the N1 cable anchor.This layer provides a preliminary estimate of potential cracking zones within the concrete,serving as a baseline for further analysis.The second layer model builds upon this foundation by incorporating material plasticity into its considerations.It pinpoints its investigation to the immediate vicinity of the cracked transverse diaphragm associated with the N1 cable,aiming to capture the intricate material behavior under stress.This layer’s predictions of crack locations and patterns exhibit a remarkable alignment with actual detection results,confirming its precision and reliability.The third and most intricate layer delves deep into the heart of the matter,examining the cracked transverse diaphragm precisely where the cable force attains its maximum intensity.By leveraging advanced extended finite element technology,this layer offers an unprecedented level of detail in tracing the progression of concrete cracks.Its findings reveal a close correlation between predicted and observed crack widths,validating the model’s proficiency in simulating real-world cracking dynamics.Crucially,the boundary conditions for each layer are meticulously aligned with those of the overarching model,ensuring consistency and integrity throughout the analysis.These results not only enrich our understanding of the cracking mechanisms but also underscore the efficacy of reinforcing cracked concrete sections with external steel plates.In conclusion,this study represents a significant contribution to the field of bridge engineering,offering both theoretical insights and practical solutions for addressing similar challenges.
基金co-supported by the National Natural Science Foundation of China(No.12202488)the National Postdoctoral Researcher Program(Grants No.GZB20230985)+1 种基金the Natural Science Program of National University of Defense Technology(No.ZK22-30)the Independent Innovation Science Fund of National University of Defense Technology(No.24-ZZCX-BC-05)。
文摘The complex flow characteristics of transverse jet in high-speed crossflow involve several separation regions and multiple shock waves,which make it difficult to capture and precisely predict the flow field state in real time merely by relying on traditional approaches.With the rapid advancement of deep learning technology,its powerful data processing capability offers a fast method for the prediction of the transverse jet flow field.Consequently,a prediction model based on deep learning is established,with the aim of obtaining the flow characteristics of a transverse jet under different freestream and jet conditions.This study segments the complex grid into several individual grids and trains them independently.The trained model can successfully establish the nonlinear mapping relationship between the transverse jet flow field and the input parameters.The prediction accuracy of the established model for the wall pressure under different conditions exceeds 99%,and the established model is also capable of reproducing structures such as shock waves and recirculation zones in the overall flow field,thereby achieving highly precise and efficient prediction of the jet structure and flow information.The results suggest that in contrast to the traditional numerical simulation,this deep learning model demonstrates greater efficiency in predicting the transverse jet flow field.
文摘Current breast reconstruction evaluations mostly focus on static cosmetic analysis as a measure of the clinical outcomes.Moreover,it is essential to consider the dynamic changes in the reconstructed breast alongside assessments of aesthetic symmetry,functional restoration,complication rates,and long-term stability of the reconstruction.This study aimed to assess the mobility of the reconstructed breast following various breast reconstruction techniques,specifically by comparing deep inferior epigastric perforator(DIEP) flaps and pedicled transverse rectus abdominis musculocutaneous(TRAM) flaps.We conducted a longitudinal case study to investigate the changes in breast movement resulting from different surgical interventions.The comparison showed that DIEP flap reconstruction was more likely to achieve superior breast mobility outcomes than TRAM flap reconstruction.For a better breast aesthetic outcome,it is fundamental to improve the awareness of the dynamic evaluation of the reconstructed breast at the surgical strategy level.
基金supported by the Qingdao Postdoctoral Science Foundation(No.862205040054)the International Research Fellowship from the Japan Society for the Promotion of Science(Postdoctoral Fellowships for Research in Japan(Standard))the National Natural Science Foundation of China(No.52078093).
文摘The mechanical properties of bedding rock in cold regions are frequently affected by freeze-thaw(F-T)cycles and ani-sotropy.Research on the mechanical characteristics of rock damage under the combined action of F-T and bedding angles is limited,and most traditional rock damage models cannot accurately capture these characteristics.We performed axial compression tests to ex-plore the strength characteristics of bedding slates at the bedding angles ofβ=0°,30°,45°,60°,and 90°under various F-T cycles.The experimental findings suggest that the elastic modulus and uniaxial compressive strength of the slate declined exponentially as the number of F-T cycles increased.Axial compressive strength was characterized by a U-shaped tendency with the bedding angle.This study proposes a damage model for the uniaxial compressive strength of transversely isotropic rock,which integrates the F-T effect,utilizing the enhanced anisotropic Hoek-Brown strength criterion and a statistical damage model.This model was validated using experimental data.This statistical damage model can precisely capture the dual attributes of rock mass strength reduction with F-T cy-cles and variations arising from the loading direction.
基金supported by the National Natural Science Foundation of China (Grant Nos. 12272269, 11972257,11832014 and 11472193)the Shanghai Pilot Program for Basic Researchthe Shanghai Gaofeng Project for University Academic Program Development。
文摘Understanding the effects of point liquid loading on transversely isotropic poroelastic media is crucial for advancing geomechanics and biomechanics, where precise modeling of fluid-structure interactions is essential. This paper presents a comprehensive analysis of infinite transversely isotropic poroelasticity under a fluid source, based on Biot's theory, aiming to uncover new and previously unexplored insights in the literature. We begin our study by deriving a general solution for fluid-saturated, transversely isotropic poroelastic materials in terms of harmonic functions that satisfy sixth-order homogeneous partial differential equations, using potential theory and Almansi's theorem. Based on these general solutions and potential functions, we construct a Green's function for a point fluid source, introducing three new harmonic functions with undetermined constants. These constants are determined by enforcing continuity and equilibrium conditions. Substituting these into the general solution yields fundamental solutions for poroelasticity that provide crucial support for a wide range of project problems. Numerical results and comparisons with existing literature are provided to illustrate physical mechanisms through contour plots. Our observations reveal that all components tend to zero in the far field and become singular at the concentrated source. Additionally, the contours exhibit rapid changes near the point fluid source but display gradual variations at a distance from it. These findings highlight the intricate behavior of the system under point liquid loading, offering valuable insights for further research and practical applications.
基金National Natural Science Foundation of China under Grant No.U2139208。
文摘Natural soil generally exhibits significant transverse isotropy(TI)due to weathering and sedimentation,meaning that horizontal moduli differ from their vertical counterpart.The TI mechanical model is more appropriate for actual situations.Although soil exhibits material nonlinearity under earthquake excitation,existing research on the TI medium is limited to soil linearity and neglects the nonlinear response of TI sites.A 2D equivalent linear model for a layered TI half-space subjected to seismic waves is derived in the transformed wave number domain using the exact dynamic stiffness matrix of the TI medium.This study introduces a method for determining the effective shear strain of TI sites under oblique wave incidence,and further describes a systematic study on the effects of TI parameters and soil nonlinearity on site responses.Numerical results indicate that seismic responses of the TI medium significantly differ from those of isotropic sites and that the responses are highly dependent on TI parameters,particularly in nonlinear cases,while also being sensitive to incident angle and excitation intensity.Moreover,the differences in peak acceleration and waveform for various TI materials may also be amplified due to the strong nonlinearity.The study provides valuable insights for improving the accuracy of seismic response analysis in engineering applications.
基金supported by the National Natural Science Foundation of China(Grant Nos.52038005 and 52201326)the fellowship of China Postdoctoral Science Foundation(Grant No.2022M721883)Tsinghua University Initiative Scientific Research Program.
文摘We present an assumed enhanced strain finite element framework for the simulation of tensile fracturing processes in transversely isotropic rocks.Fractures along the weak bedding planes and through the anisotropic rock matrix are treated with distinct enrichment,and a recently proposed dualmechanism tensile failure criterion for transversely isotropic rocks is adopted to determine crack initiation for the two failure modes.The cohesive crack model is adopted to characterize the response of embedded cracks.As for the numerical implementation of the proposed framework,both algorithms for the update of local history variables at Gauss points and of the global finite element system are derived.Four boundary-value problem simulations are carried out with the proposed framework,including uniaxial tension tests of Argillite,pre-notched square loaded in tension,three-point bending tests on Longmaxi shale,and simulations of tensile cracks induced by a strip load around a tunnel in transversely isotropic rocks.Simulation results reveal that the proposed framework can properly capture the tensile strength anisotropy and the anisotropic evolution of tensile cracks in transversely isotropic rocks.
基金Supported by Grants of the Korea Research Foundation,an NRF Grant Funded by the Korea Government,No.NRF-2023R1A2C3003717.
文摘In this editorial,we comment on an article by Liao et al published in the current issue of the World Journal of Diabetes.We focus on the clinical significance of tibial transverse transport(TTT)as an effective treatment for patients with diabetic foot ulcers(DFU).TTT has been associated with tissue regeneration,improved blood circulation,reduced amputation rates,and increased expression of early angiogenic factors.Mechanistically,TTT can influence macrophage polarization and growth factor upregulation.Despite this potential,the limitations and conflicting results of existing studies justify the need for further research into its optimal application and development.These clinical implications highlight the efficacy of TTT in recalcitrant DFU and provide lasting stimuli for tissue re-generation,and blood vessel and bone marrow improvement.Immunomodu-lation via systemic responses contributes to its therapeutic potential.Future studies should investigate the underlying molecular mechanisms to enhance our understanding and the efficacy of TTT.This manuscript emphasizes the potential of TTT in limb preservation and diabetic wound healing and suggests avenues for preventive measures against limb amputation in diabetes and peripheral artery disease.Here,we highlight the clinical significance of the TTT and its importance in healing DFU to promote the use of this technique in tissue regeneration.
文摘The magnetic flux in a permanent magnet transverse flux generator(PMTFG) is three-dimensional(3D), therefore, its efficacy is evaluated using 3D magnetic field analysis. Although the 3D finite-element method(FEM) is highly accurate and reliable for machine simulation, it requires a long computation time, which is crucial when it is to be used in an iterative optimization process. Therefore, an alternative to 3DFEM is required as a rapid and accurate analytical technique. This paper presents an analytical model for PMTFG analysis using winding function method. To obtain the air gap MMF distribution, the excitation magneto-motive force(MMF) and the turn function are determined based on certain assumptions. The magnetizing inductance, flux density, and back-electro-magnetomotive force of the winding are then determined. To assess the accuracy of the proposed method, the analytically calculated parameters of the generator are compared to those obtained by a 3D-FEM. The presented method requires significantly shorter computation time than the 3D-FEM with comparable accuracy.
基金The ethics committee of the First Affiliated Hospital of Chongqing Medical University approved this study,No.K2024-008-01.
文摘BACKGROUND Ostomy is a common surgery usually performed to protect patients from clinical symptoms caused by distal anastomotic leakage after colorectal cancer(CRC)surgery and perforation or to relieve intestinal obstruction.AIM To analyze the complications after transverse colostomy closure.METHODS Patients who underwent transverse colostomy closure from Jan 2015 to Jan 2022 were retrospectively enrolled in a single clinical center.The differences between the complication group and the no complication group were compared.Logistic regression analyses were conducted to find independent factors for overall complications or incision infection.RESULTS A total of 102 patients who underwent transverse colostomy closure were enrolled in the current study.Seventy(68.6%)patients underwent transverse colostomy because of CRC related causes.Postoperative complications occurred in 30(29.4%)patients and the most frequent complication occurring after transverse colostomy closure was incision infection(46.7%).The complication group had longer hospital stays(P<0.01).However,no potential risk factors were identified for overall complications and incision infection.CONCLUSION The most frequent complication occurring after transverse colostomy closure surgery in our center was incision infection.The operation time,interval from transverse colostomy to reversal,and method of anastomosis might have no impact on the postoperative complications.Surgeons should pay more attention to aseptic techniques.
基金We would like to acknowledge all the reviewers and editors and the sponsorship of National Natural Science Foundation of China(42030103)the Marine S&T Fund of Shandong Province for Pilot National Laboratory for Marine Science and Technology(Qingdao)(2021QNLM020001-6)the Laoshan National Laboratory of Science and Technology Foundation(LSKJ202203400).
文摘Seismic prediction of cracks is of great significance in many disciplines,for which the rock physics model is indispensable.However,up to now,multitudinous analytical models focus primarily on the cracked rock with the isotropic background,while the explicit model for the cracked rock with the anisotropic background is rarely investigated in spite of such case being often encountered in the earth.Hence,we first studied dependences of the crack opening displacement tensors on the crack dip angle in the coordinate systems formed by symmetry planes of the crack and the background anisotropy,respectively,by forty groups of numerical experiments.Based on the conclusion from the experiments,the analytical solution was derived for the effective elastic properties of the rock with the inclined penny-shaped cracks in the transversely isotropic background.Further,we comprehensively analyzed,according to the developed model,effects of the crack dip angle,background anisotropy,filling fluid and crack density on the effective elastic properties of the cracked rock.The analysis results indicate that the dip angle and background anisotropy can significantly either enhance or weaken the anisotropy degrees of the P-and SH-wave velocities,whereas they have relatively small effects on the SV-wave velocity anisotropy.Moreover,the filling fluid can increase the stiffness coefficients related to the compressional modulus by reducing crack compliance parameters,while its effects on shear coefficients depend on the crack dip angle.The increasing crack density reduces velocities of the dry rock,and decreasing rates of the velocities are affected by the crack dip angle.By comparing with exact numerical results and experimental data,it was demonstrated that the proposed model can achieve high-precision estimations of stiffness coefficients.Moreover,the assumption of the weakly anisotropic background results in the consistency between the proposed model and Hudson's published theory for the orthorhombic rock.
