A 30Gbit/s receptor module is developed with a CMOS integrated receiver chip（IC） and a GaAs-based 1 × 12 photo detector array of PIN-type. Parallel technology is adopted in this module to realize a high-speed r...A 30Gbit/s receptor module is developed with a CMOS integrated receiver chip（IC） and a GaAs-based 1 × 12 photo detector array of PIN-type. Parallel technology is adopted in this module to realize a high-speed receiver module with medium speed devices. A high-speed printed circuit board（PCB） is designed and produced. The IC chip and the PD array are packaged on the PCB by chip-on-board technology. Flip chip alignment is used for the PD array accurately assembled on the module so that a plug-type optical port is built. Test results show that the module can receive parallel signals at 30Gbit/s. The sensitivity of the module is - 13.6dBm for 10^-13 BER.展开更多
The Rydberg atom-based receiver, as a novel type of antenna, demonstrates broad application prospects in the field of microwave communications. However, since Rydberg atomic receivers are nonlinear systems, mismatches...The Rydberg atom-based receiver, as a novel type of antenna, demonstrates broad application prospects in the field of microwave communications. However, since Rydberg atomic receivers are nonlinear systems, mismatches between the parameters of the received amplitude modulation(AM) signals and the system's linear workspace and demodulation operating points can cause severe distortion in the demodulated signals. To address this, the article proposes a method for determining the operational parameters based on the mean square error(MSE) and total harmonic distortion(THD) assessments and presents strategies for optimizing the system's operational parameters focusing on linear response characteristics(LRC) and linear dynamic range(LDR). Specifically, we employ a method that minimizes the MSE to define the system's linear workspace, thereby ensuring the system has a good LRC while maximizing the LDR. To ensure that the signal always operates within the linear workspace, an appropriate carrier amplitude is set as the demodulation operating point. By calculating the THD at different operating points, the LRC performance within different regions of the linear workspace is evaluated, and corresponding optimization strategies based on the range of signal strengths are proposed. Moreover, to more accurately restore the baseband signal, we establish a mapping relationship between the carrier Rabi frequency and the transmitted power of the probe light, and optimize the slope of the linear demodulation function to reduce the MSE to less than 0.8×10^(-4). Finally, based on these methods for determining the operational parameters, we explore the effects of different laser Rabi frequencies on the system performance, and provide optimization recommendations. This research provides robust support for the design of high-performance Rydberg atom-based AM receivers.展开更多
Existing Generalized Receive Spatial Modulation(GRSM)with Symbol-Level Precoding(SLP)forces the received signals(excluding noise)at unintended antennas to be zero,which restricts the generation of strong constructive ...Existing Generalized Receive Spatial Modulation(GRSM)with Symbol-Level Precoding(SLP)forces the received signals(excluding noise)at unintended antennas to be zero,which restricts the generation of strong constructive interference to intended receive antennas and thus limits the performance improvement over conventional GRSM with Zero-Forcing(ZF)precoding.In this paper,we propose a novel GRSM-SLP scheme that relaxes the zero receive power constraint and achieves superior performance by integrating Intelligent Reflecting Surfaces(IRSs).Specifically,our advanced GRSM-RSLP jointly exploits SLP at the transmitter and passive beamforming at the IRS to maximize the power difference between intended and unintended receive antennas,where the received signals at unintended antennas are relaxed to lie in a sphere centered at origin with a preset radius that depends on the Signal-to-Noise Ratio(SNR)value.The precoding matrix and passive beamforming vectors are optimized alternately by considering both phase shift keying and quadrature amplitude modulation signaling.It is worth emphasizing that GRSM-RSLP is a universal solution,also applicable to systems without IRS,although it performs better in IRS-assisted systems.We finally conduct extensive simulations to prove the superiority of GRSM-RSLP over GRSM-ZF and GRSM-SLP.Simulation results show that the performance of GRSM-RSLP is significantly influenced by the number of unintended antennas,and the larger the number,the better its performance.In the best-case scenario,GRSM-RSLP can achieve SNR gains of up to 10.5 dB and 12.5 dB over GRSM-SLP and GRSM-ZF,respectively.展开更多
In high-speed railway(HSR)wireless communication,the rapid channel changes and limited high-capacity access cause significant impact on the link performance.Meanwhile,the Doppler shift caused by high mobility leads to...In high-speed railway(HSR)wireless communication,the rapid channel changes and limited high-capacity access cause significant impact on the link performance.Meanwhile,the Doppler shift caused by high mobility leads to the inter-carrier interference.In this paper,we propose a reconfigurable intelligent surface(RIS)-assisted receive spatial modulation(SM)scheme based on the spatial-temporal correlated HSR Rician channel.The characteristics of SM and the phase shift adjustment of RIS are used to mitigate the performance degradation in high mobility scenarios.Considering the influence of channel spatial-temporal correlation and Doppler shift,the effects of different parameters on average bit error rate(BER)performance and upper bound of ergodic capacity are analyzed.Therefore,a joint antenna and RIS-unit selection algorithm based on the antenna removal method is proposed to increase the capacity performance of communication links.Numerical results show that the proposed RIS-assisted receive SM scheme can maintain high transmission capacity compared to the conventional HSR-SM scheme,whereas the degradation of BER performance can be compensated by arranging a large number of RIS-units.In addition,selecting more RIS-units has better capacity performance than activating more antennas in the low signal-to-noise ratio regions.展开更多
This paper presents an innovative switched-mode auto gain control （AGC） circuit with internally created reset module for DC-10Mb/s burst-mode unbalanced （BMU） optical data transmission. Conventional AGC circuit is...This paper presents an innovative switched-mode auto gain control （AGC） circuit with internally created reset module for DC-10Mb/s burst-mode unbalanced （BMU） optical data transmission. Conventional AGC circuit is inappropriate for BMU data transmission because it is based on average level detection and requires considerable time to settle on a predefined gain. Therefore, we adopt a fast switched-mode AGC based on peak level detection. After the gain is adjusted, the peak level detectors need to re-detect the peak level of the input signal. Thus, we develop an internally created reset module. This AGC with reset module exhibits a fast operation and achieves an adjusted stable gain within one-bit, avoiding any bit loss up to 10Mb/s data rate. During power-up, the peak level detectors possibly hold an uncertain level resulting in the bit-errors. We propose a power-up reset circuit to solve this problem. Designed in a 0.5μm CMOS technology, the circuit achieves an optical sensitivity of better than -30dBm and a wide dynamic range of over 30dB with a power dissipation of only 30 mW from a 5V supply.展开更多
The downlink minimum bit error rate (MBER) transmit beamforming is directly designed based on the uplink MBER receive beamforming solution for time division duplex (TDD) space-division multiple-access (SDMA) induced m...The downlink minimum bit error rate (MBER) transmit beamforming is directly designed based on the uplink MBER receive beamforming solution for time division duplex (TDD) space-division multiple-access (SDMA) induced multiple-input multiple-output (MIMO) systems, where the base station (BS) is equipped with multiple antennas to support multiple single-antenna mobile terminals (MTs). It is shown that the dual relationship between multiuser detection and multiuser transmission can be extended to the rank-deficient system where the number of users supported is more than the number of transmit antennas available at the BS, if the MBER design is adopted. The proposed MBER transmit beamforming scheme is capable of achieving better performance over the standard minimum mean square error transmit beamforming solution with the support of low-complexity and high power-efficient MTs, particularly for rank-deficient TDD-SDMA MIMO systems. The robustness of the proposed MBER transmit beamforming design to the downlink and uplink noise or channel mismatch is investigated using simulation.展开更多
Radio frequency identification(RFID) is a ubiquitous identification technology nowadays. An on-chip high-performance transmit/receive(T/R) switch is designed and simulated in 0.13-μm CMOS technology for reader-less R...Radio frequency identification(RFID) is a ubiquitous identification technology nowadays. An on-chip high-performance transmit/receive(T/R) switch is designed and simulated in 0.13-μm CMOS technology for reader-less RFID tag. The switch utilizes only the transistor width and length(W/L) optimization, proper gate bias resistor and resistive body floating technique and therefore,exhibits 1 d B insertion loss, 31.5 d B isolation and 29.2 d Bm 1-d B compression point(P1d B). Moreover, the switch dissipates only786.7 n W power for 1.8/0 V control voltages and is capable of switching in 794 fs. Above all, as there is no inductor or capacitor used in the circuit, the size of the switch is 0.00208 mm2 only. This switch will be appropriate for reader-less RFID tag transceiver front-end as well as other wireless transceivers operated at 2.4 GHz band.展开更多
All digital implementation of receiver is a main topic on digital communication recently. The design of interpolation filter is one of the important problems for all digital implementation of receiver. In this paper, ...All digital implementation of receiver is a main topic on digital communication recently. The design of interpolation filter is one of the important problems for all digital implementation of receiver. In this paper, for full response linear modulation signal, a interpolation criterion is proposed. An interpolation formula is presented on bandwidth-limited transmission signal. For example, using the raised cosine roll off function as the system pulse response, the feasibility and effectiveness on the interpolation formula are certified by theoretical and numerical analysis. The computer simulation result on 16-QAM signal is given.展开更多
We introduce a new transmit/receive dipole pair array to obtain a compact quasi\|monostatic antenna structure for ground penetrating radar systems.And we analyze this transmit/receive dipole pair array in time domain....We introduce a new transmit/receive dipole pair array to obtain a compact quasi\|monostatic antenna structure for ground penetrating radar systems.And we analyze this transmit/receive dipole pair array in time domain.The numerical results show that if the distance between the transmit antenna and receive antenna is appropriate the array configuration is adoptable.展开更多
A robust scheme is proposed to jointly optimize transmit/receive beamformers for Mul-tiple Input Multiple Output(MIMO) downlinks where the available Channel State Information(CSI) at Base Station(BS)(CSIBS) is imperfe...A robust scheme is proposed to jointly optimize transmit/receive beamformers for Mul-tiple Input Multiple Output(MIMO) downlinks where the available Channel State Information(CSI) at Base Station(BS)(CSIBS) is imperfect.The criterion is to minimize the sum Mean Square Error(sum-MSE) over all users under a constraint on the total transmit power,which is a non-convex and non-linear problem.Observing from the first order optimization condition that the optimal trans-mit/receive beamformers are mutually dependent,the transmit/receive beamformers for each user are updated iteratively until the sum-MSE is minimized.Simulation results indicate that the proposed scheme can effectively mitigate the system performance loss induced by imperfect CSIBS.展开更多
In this paper,the performance of uplink multiuser massive multiple-input multipleoutput(MIMO)system with spatial modulation over transmit-correlated Rayleigh fading channel is investigated,where a large number of ante...In this paper,the performance of uplink multiuser massive multiple-input multipleoutput(MIMO)system with spatial modulation over transmit-correlated Rayleigh fading channel is investigated,where a large number of antennas are deployed at the base station and linear zero-forcing(ZF)receiver is employed for detection.By taking the transmit correlation and the randomness of shadow fading in to account,the bit error rate(BER)performance of the system is analyzed.According to the performance analysis,an approximated expression of overall average BER of the system is attained.Besides,asymptotic performance is studied and the corresponding BER expression at high signal-to-noise ratio is derived.On this basis,the diversity gain of the system can be obtained for performance evaluation.Simulation results show that the derived theoretical expressions match the simulated values well,which verifies the correctness of our analysis.展开更多
Radar target probing and measurement are challenging tasks for Radio Frequency Simulation（RFS） with pulse radar signal. Due to the long-time duration of pulse radar signal and the limited space of anechoic chamber, ...Radar target probing and measurement are challenging tasks for Radio Frequency Simulation（RFS） with pulse radar signal. Due to the long-time duration of pulse radar signal and the limited space of anechoic chamber, the reflected signal returns before pulse radar signal is fully transmitted in RFS. As a consequence, the transmitted and reflected signals are coupled at the receiver. To handle this problem, the Interrupted Transmitting and Receiving（ITR） experiment system is constructed in this paper by dividing the pulse radar signal into sub-pulses. The target echo can be obtained by transmitting and receiving the sub-pulses intermittently. Furthermore, the principles of ITR are discussed and the target probing experiments are performed with the ITR system. It is demonstrated that the ITR system can overcome the coupling between the reflected and transmitted signals. Based on the target probing results, the performance of pulse radar target probing and measurement can be verified in RFS with the ITR system.展开更多
This paper investigates the jamming sensing performance of the simultaneous transmit and receive based cognitive anti-jamming(SCAJ) receiver impaired by phase noise in local oscillators(LO) over fading channels. First...This paper investigates the jamming sensing performance of the simultaneous transmit and receive based cognitive anti-jamming(SCAJ) receiver impaired by phase noise in local oscillators(LO) over fading channels. Firstly, energy detection(ED)based on the jamming to noise ratio(JNR) of the high frequency bands SCAJ receiver with phase noise under different channels is analyzed. Then, the probabilities of jamming detection and false alarm in closed-form for the SCAJ receiver are derived. Finally,the modified Bayesian Cramer-Rao bound(BCRB) of jamming sensing for the SCAJ receiver is presented. Simulation results show that the performance degradation of the SCAJ system due to phase noise is more severe than that due to the channel fading in the circumstances where the signal bandwidth(BW) is kept a constant. Moreover, the signal BW has an effect on the phase noise in LO, and the jamming detection probability of the wideband SCAJ receiver with lower phase noise outperforms that of the narrowband receiver using the same center frequency. Furthermore,an accurate phase noise estimation and compensation scheme can improve the jamming detection capability of the SCAJ receiver in high frequency bands and approach to the upper bound.展开更多
We consider an iterative phase synchronization scheme based on maximum a posteriori probability algorithm.In classical approaches,the phase noise estimation model considers one sample per symbol at the channel and rec...We consider an iterative phase synchronization scheme based on maximum a posteriori probability algorithm.In classical approaches,the phase noise estimation model considers one sample per symbol at the channel and receiver.However,information theoretic studies suggested use of more than one sample per symbol at the channel and receiver for achieving higher performance.In this article,a soft-information aided iterative receiver is derived,which uses off-the-shelf blocks for detection and demodulation by keeping the complexity of the receiver acceptable.We consider here two samples per symbols at the channel and receiver in a pragmatic paradigm.It is shown that phase noise estimation can be significantly improved at the expense of modest processing overhead.Simulation results are presented for low-density parity check coded quadrature amplitude modulations.Our results show a significant performance improvement for strong phase noise values compared to classical receiver approaches.展开更多
A novel technique based on sub-wavelength plasma structure effects on enhancement of RF communication signals on a receiving antenna is carried out in this paper in laboratory experiments and analyzed by corresponding...A novel technique based on sub-wavelength plasma structure effects on enhancement of RF communication signals on a receiving antenna is carried out in this paper in laboratory experiments and analyzed by corresponding numerical simulations.Considerable intensification on receiving signal gain up to -10 d B in comparison with that without the plasma modulation is observed experimentally in -1 GHz RF band,with an effective enhancement bandwidth of -340 MHz and the fractional bandwidth of -34%.Then,the optimal modulation parameters of plasma are further studied by a numerical simulation.It is shown that the number density,the layer thickness,and the collision frequency of the plasma,as well as the relative distance between the plasma layer and antenna synergistically affect the modulation.Compared to the metallic antenna with the same overall dimension,the modulated antenna covered by the subwavelength plasma structure features higher receiving efficiency and lower radar cross section in the studied RF band.The mechanism of the reception enhancement is further revealed by analyzing characteristics of electromagnetic scattering and electric field distribution in the subwavelength plasma layer.The results then exhibit scientific significance and application potential of sub-wavelength plasma modulation on compact receiving antennas with higher performance and better feature of radar stealth.展开更多
A two-dimensional rectangular solenoid transmitting coil is proposed to address the problem that the three-dimensional receiving coil occupies excessive space inside the capsule robot.The transmitting coil consists of...A two-dimensional rectangular solenoid transmitting coil is proposed to address the problem that the three-dimensional receiving coil occupies excessive space inside the capsule robot.The transmitting coil consists of two pairs of rectangular solenoid coils distributed radially along the human body.By changing the direction of current flow,it can generate a two-dimensional magnetic field covering the whole central plane.Firstly,the working mechanism of the wireless power transfer system is introduced,and then the spatial electromagnetic field generated by the transmitting coil is analyzed through both mathematical calculations and finite element simulations.Finally,an experimental platform is built to determine the optimal resonant frequency of the system and validate its feasibility based on the power transfer efficiency and the receiving power.The experimental results demonstrate that when the receiving coil is located at the center of the coil pair,the receiving power is 1416 mW and the power transfer efficiency is 3.96%.Additionally,when the receiving coil operates in the central plane,it can receive sufficient energy regardless of the orientation.展开更多
Based on the Complex Orthogonal Linear Dispersion (COLD) code,a novel linear Differ- ential Space-Time Modulation (DSTM) design is proposed in this paper.Compared with the existing nonlinear DSTM schemes based on grou...Based on the Complex Orthogonal Linear Dispersion (COLD) code,a novel linear Differ- ential Space-Time Modulation (DSTM) design is proposed in this paper.Compared with the existing nonlinear DSTM schemes based on group codes,the proposed linear DSTM scheme is easier to design, enjoys full diversity and allows for a simplified differential receiver,which can detect the transmitted symbols separately.Furthermore,compared with the existing linear DSTM based on orthogonal design, our new construction can be applied to any number of transmit antennas.Similar to other algorithms, the proposed scheme also can be demodulated with or without channel estimates at the receiver,but the performance degrades approximately by 3dB when estimates are not available.展开更多
Previously proposed differential modulation schemes for time-varying channels may not achieve the full transmit diversity and the maximum Doppler diversity simultaneously. Based on an existing basis expansion model, a...Previously proposed differential modulation schemes for time-varying channels may not achieve the full transmit diversity and the maximum Doppler diversity simultaneously. Based on an existing basis expansion model, a new differential space-time code, which wisely combines interleaver/de-interleaver with traditonal space-time transmitting technique to overcome such limitation, .is presented. Two noncoherent differential decoders, named decision-feedback differential detector （DF-DD） and Viterbi-algorithmbased multiple-symbol-detection differential detector （ MSD-DD）, are also derived. We show that our design may recover data symbols with full antenna diversity and the maximum Doppler diversity at high signal-to-noise ratio. System performance is evaluated with simulations.展开更多
文摘A 30Gbit/s receptor module is developed with a CMOS integrated receiver chip（IC） and a GaAs-based 1 × 12 photo detector array of PIN-type. Parallel technology is adopted in this module to realize a high-speed receiver module with medium speed devices. A high-speed printed circuit board（PCB） is designed and produced. The IC chip and the PD array are packaged on the PCB by chip-on-board technology. Flip chip alignment is used for the PD array accurately assembled on the module so that a plug-type optical port is built. Test results show that the module can receive parallel signals at 30Gbit/s. The sensitivity of the module is - 13.6dBm for 10^-13 BER.
基金Project supported by the National Natural Science Foundation of China (Grant No. U22B2095)the Civil Aerospace Technology Research Project (Grant No. D010103)。
文摘The Rydberg atom-based receiver, as a novel type of antenna, demonstrates broad application prospects in the field of microwave communications. However, since Rydberg atomic receivers are nonlinear systems, mismatches between the parameters of the received amplitude modulation(AM) signals and the system's linear workspace and demodulation operating points can cause severe distortion in the demodulated signals. To address this, the article proposes a method for determining the operational parameters based on the mean square error(MSE) and total harmonic distortion(THD) assessments and presents strategies for optimizing the system's operational parameters focusing on linear response characteristics(LRC) and linear dynamic range(LDR). Specifically, we employ a method that minimizes the MSE to define the system's linear workspace, thereby ensuring the system has a good LRC while maximizing the LDR. To ensure that the signal always operates within the linear workspace, an appropriate carrier amplitude is set as the demodulation operating point. By calculating the THD at different operating points, the LRC performance within different regions of the linear workspace is evaluated, and corresponding optimization strategies based on the range of signal strengths are proposed. Moreover, to more accurately restore the baseband signal, we establish a mapping relationship between the carrier Rabi frequency and the transmitted power of the probe light, and optimize the slope of the linear demodulation function to reduce the MSE to less than 0.8×10^(-4). Finally, based on these methods for determining the operational parameters, we explore the effects of different laser Rabi frequencies on the system performance, and provide optimization recommendations. This research provides robust support for the design of high-performance Rydberg atom-based AM receivers.
基金supported in part by the National Key R&D Program of China under Grant 2023YFB2904500in part by the National Natural Science Foundation of China under Grant 62471183in part by the Fundamental Research Funds for the Central Universities under Grant 2024ZYGXZR076.
文摘Existing Generalized Receive Spatial Modulation(GRSM)with Symbol-Level Precoding(SLP)forces the received signals(excluding noise)at unintended antennas to be zero,which restricts the generation of strong constructive interference to intended receive antennas and thus limits the performance improvement over conventional GRSM with Zero-Forcing(ZF)precoding.In this paper,we propose a novel GRSM-SLP scheme that relaxes the zero receive power constraint and achieves superior performance by integrating Intelligent Reflecting Surfaces(IRSs).Specifically,our advanced GRSM-RSLP jointly exploits SLP at the transmitter and passive beamforming at the IRS to maximize the power difference between intended and unintended receive antennas,where the received signals at unintended antennas are relaxed to lie in a sphere centered at origin with a preset radius that depends on the Signal-to-Noise Ratio(SNR)value.The precoding matrix and passive beamforming vectors are optimized alternately by considering both phase shift keying and quadrature amplitude modulation signaling.It is worth emphasizing that GRSM-RSLP is a universal solution,also applicable to systems without IRS,although it performs better in IRS-assisted systems.We finally conduct extensive simulations to prove the superiority of GRSM-RSLP over GRSM-ZF and GRSM-SLP.Simulation results show that the performance of GRSM-RSLP is significantly influenced by the number of unintended antennas,and the larger the number,the better its performance.In the best-case scenario,GRSM-RSLP can achieve SNR gains of up to 10.5 dB and 12.5 dB over GRSM-SLP and GRSM-ZF,respectively.
基金supported in part by National Natural Science Foundation of China under Grant 62461024Jiangxi Provincial Natural Science Foundation of China under Grant 20224ACB202001.
文摘In high-speed railway(HSR)wireless communication,the rapid channel changes and limited high-capacity access cause significant impact on the link performance.Meanwhile,the Doppler shift caused by high mobility leads to the inter-carrier interference.In this paper,we propose a reconfigurable intelligent surface(RIS)-assisted receive spatial modulation(SM)scheme based on the spatial-temporal correlated HSR Rician channel.The characteristics of SM and the phase shift adjustment of RIS are used to mitigate the performance degradation in high mobility scenarios.Considering the influence of channel spatial-temporal correlation and Doppler shift,the effects of different parameters on average bit error rate(BER)performance and upper bound of ergodic capacity are analyzed.Therefore,a joint antenna and RIS-unit selection algorithm based on the antenna removal method is proposed to increase the capacity performance of communication links.Numerical results show that the proposed RIS-assisted receive SM scheme can maintain high transmission capacity compared to the conventional HSR-SM scheme,whereas the degradation of BER performance can be compensated by arranging a large number of RIS-units.In addition,selecting more RIS-units has better capacity performance than activating more antennas in the low signal-to-noise ratio regions.
基金Supported by the Natural Science Foundation of Jiangsu Province （ BK2010411 ） and the National International Cooperation Project of China-Korea （2011DFA11310）.
文摘This paper presents an innovative switched-mode auto gain control （AGC） circuit with internally created reset module for DC-10Mb/s burst-mode unbalanced （BMU） optical data transmission. Conventional AGC circuit is inappropriate for BMU data transmission because it is based on average level detection and requires considerable time to settle on a predefined gain. Therefore, we adopt a fast switched-mode AGC based on peak level detection. After the gain is adjusted, the peak level detectors need to re-detect the peak level of the input signal. Thus, we develop an internally created reset module. This AGC with reset module exhibits a fast operation and achieves an adjusted stable gain within one-bit, avoiding any bit loss up to 10Mb/s data rate. During power-up, the peak level detectors possibly hold an uncertain level resulting in the bit-errors. We propose a power-up reset circuit to solve this problem. Designed in a 0.5μm CMOS technology, the circuit achieves an optical sensitivity of better than -30dBm and a wide dynamic range of over 30dB with a power dissipation of only 30 mW from a 5V supply.
文摘The downlink minimum bit error rate (MBER) transmit beamforming is directly designed based on the uplink MBER receive beamforming solution for time division duplex (TDD) space-division multiple-access (SDMA) induced multiple-input multiple-output (MIMO) systems, where the base station (BS) is equipped with multiple antennas to support multiple single-antenna mobile terminals (MTs). It is shown that the dual relationship between multiuser detection and multiuser transmission can be extended to the rank-deficient system where the number of users supported is more than the number of transmit antennas available at the BS, if the MBER design is adopted. The proposed MBER transmit beamforming scheme is capable of achieving better performance over the standard minimum mean square error transmit beamforming solution with the support of low-complexity and high power-efficient MTs, particularly for rank-deficient TDD-SDMA MIMO systems. The robustness of the proposed MBER transmit beamforming design to the downlink and uplink noise or channel mismatch is investigated using simulation.
基金supported by the research grant Economic Transformation Programme (ETP-2013-037) from Universiti Kebangsaan Malaysia and the Ministry of Science, Technology and Innovation (MOSTI) respectively
文摘Radio frequency identification(RFID) is a ubiquitous identification technology nowadays. An on-chip high-performance transmit/receive(T/R) switch is designed and simulated in 0.13-μm CMOS technology for reader-less RFID tag. The switch utilizes only the transistor width and length(W/L) optimization, proper gate bias resistor and resistive body floating technique and therefore,exhibits 1 d B insertion loss, 31.5 d B isolation and 29.2 d Bm 1-d B compression point(P1d B). Moreover, the switch dissipates only786.7 n W power for 1.8/0 V control voltages and is capable of switching in 794 fs. Above all, as there is no inductor or capacitor used in the circuit, the size of the switch is 0.00208 mm2 only. This switch will be appropriate for reader-less RFID tag transceiver front-end as well as other wireless transceivers operated at 2.4 GHz band.
文摘All digital implementation of receiver is a main topic on digital communication recently. The design of interpolation filter is one of the important problems for all digital implementation of receiver. In this paper, for full response linear modulation signal, a interpolation criterion is proposed. An interpolation formula is presented on bandwidth-limited transmission signal. For example, using the raised cosine roll off function as the system pulse response, the feasibility and effectiveness on the interpolation formula are certified by theoretical and numerical analysis. The computer simulation result on 16-QAM signal is given.
基金Supported jointly by a Grand Project of the National Natural Science Foundation of China and the Changjiang Water Resources Commission(50099620)
文摘We introduce a new transmit/receive dipole pair array to obtain a compact quasi\|monostatic antenna structure for ground penetrating radar systems.And we analyze this transmit/receive dipole pair array in time domain.The numerical results show that if the distance between the transmit antenna and receive antenna is appropriate the array configuration is adoptable.
基金the National Natural Science Foundation of China(No.60572156)
文摘A robust scheme is proposed to jointly optimize transmit/receive beamformers for Mul-tiple Input Multiple Output(MIMO) downlinks where the available Channel State Information(CSI) at Base Station(BS)(CSIBS) is imperfect.The criterion is to minimize the sum Mean Square Error(sum-MSE) over all users under a constraint on the total transmit power,which is a non-convex and non-linear problem.Observing from the first order optimization condition that the optimal trans-mit/receive beamformers are mutually dependent,the transmit/receive beamformers for each user are updated iteratively until the sum-MSE is minimized.Simulation results indicate that the proposed scheme can effectively mitigate the system performance loss induced by imperfect CSIBS.
文摘In this paper,the performance of uplink multiuser massive multiple-input multipleoutput(MIMO)system with spatial modulation over transmit-correlated Rayleigh fading channel is investigated,where a large number of antennas are deployed at the base station and linear zero-forcing(ZF)receiver is employed for detection.By taking the transmit correlation and the randomness of shadow fading in to account,the bit error rate(BER)performance of the system is analyzed.According to the performance analysis,an approximated expression of overall average BER of the system is attained.Besides,asymptotic performance is studied and the corresponding BER expression at high signal-to-noise ratio is derived.On this basis,the diversity gain of the system can be obtained for performance evaluation.Simulation results show that the derived theoretical expressions match the simulated values well,which verifies the correctness of our analysis.
基金supported in part by the National Natural Science Foundation of China(Nos.61101180,61401491 and 61490692)
文摘Radar target probing and measurement are challenging tasks for Radio Frequency Simulation（RFS） with pulse radar signal. Due to the long-time duration of pulse radar signal and the limited space of anechoic chamber, the reflected signal returns before pulse radar signal is fully transmitted in RFS. As a consequence, the transmitted and reflected signals are coupled at the receiver. To handle this problem, the Interrupted Transmitting and Receiving（ITR） experiment system is constructed in this paper by dividing the pulse radar signal into sub-pulses. The target echo can be obtained by transmitting and receiving the sub-pulses intermittently. Furthermore, the principles of ITR are discussed and the target probing experiments are performed with the ITR system. It is demonstrated that the ITR system can overcome the coupling between the reflected and transmitted signals. Based on the target probing results, the performance of pulse radar target probing and measurement can be verified in RFS with the ITR system.
基金supported by the Program of the Aeronautical Science Foundation of China(2013ZC15003)
文摘This paper investigates the jamming sensing performance of the simultaneous transmit and receive based cognitive anti-jamming(SCAJ) receiver impaired by phase noise in local oscillators(LO) over fading channels. Firstly, energy detection(ED)based on the jamming to noise ratio(JNR) of the high frequency bands SCAJ receiver with phase noise under different channels is analyzed. Then, the probabilities of jamming detection and false alarm in closed-form for the SCAJ receiver are derived. Finally,the modified Bayesian Cramer-Rao bound(BCRB) of jamming sensing for the SCAJ receiver is presented. Simulation results show that the performance degradation of the SCAJ system due to phase noise is more severe than that due to the channel fading in the circumstances where the signal bandwidth(BW) is kept a constant. Moreover, the signal BW has an effect on the phase noise in LO, and the jamming detection probability of the wideband SCAJ receiver with lower phase noise outperforms that of the narrowband receiver using the same center frequency. Furthermore,an accurate phase noise estimation and compensation scheme can improve the jamming detection capability of the SCAJ receiver in high frequency bands and approach to the upper bound.
文摘We consider an iterative phase synchronization scheme based on maximum a posteriori probability algorithm.In classical approaches,the phase noise estimation model considers one sample per symbol at the channel and receiver.However,information theoretic studies suggested use of more than one sample per symbol at the channel and receiver for achieving higher performance.In this article,a soft-information aided iterative receiver is derived,which uses off-the-shelf blocks for detection and demodulation by keeping the complexity of the receiver acceptable.We consider here two samples per symbols at the channel and receiver in a pragmatic paradigm.It is shown that phase noise estimation can be significantly improved at the expense of modest processing overhead.Simulation results are presented for low-density parity check coded quadrature amplitude modulations.Our results show a significant performance improvement for strong phase noise values compared to classical receiver approaches.
基金supported by National Natural Science Foundation of China(Nos.51577044 and 11605035)
文摘A novel technique based on sub-wavelength plasma structure effects on enhancement of RF communication signals on a receiving antenna is carried out in this paper in laboratory experiments and analyzed by corresponding numerical simulations.Considerable intensification on receiving signal gain up to -10 d B in comparison with that without the plasma modulation is observed experimentally in -1 GHz RF band,with an effective enhancement bandwidth of -340 MHz and the fractional bandwidth of -34%.Then,the optimal modulation parameters of plasma are further studied by a numerical simulation.It is shown that the number density,the layer thickness,and the collision frequency of the plasma,as well as the relative distance between the plasma layer and antenna synergistically affect the modulation.Compared to the metallic antenna with the same overall dimension,the modulated antenna covered by the subwavelength plasma structure features higher receiving efficiency and lower radar cross section in the studied RF band.The mechanism of the reception enhancement is further revealed by analyzing characteristics of electromagnetic scattering and electric field distribution in the subwavelength plasma layer.The results then exhibit scientific significance and application potential of sub-wavelength plasma modulation on compact receiving antennas with higher performance and better feature of radar stealth.
基金the National Natural Science Foundation of China(Nos.62273225,81971767,62103267 and 62103263)。
文摘A two-dimensional rectangular solenoid transmitting coil is proposed to address the problem that the three-dimensional receiving coil occupies excessive space inside the capsule robot.The transmitting coil consists of two pairs of rectangular solenoid coils distributed radially along the human body.By changing the direction of current flow,it can generate a two-dimensional magnetic field covering the whole central plane.Firstly,the working mechanism of the wireless power transfer system is introduced,and then the spatial electromagnetic field generated by the transmitting coil is analyzed through both mathematical calculations and finite element simulations.Finally,an experimental platform is built to determine the optimal resonant frequency of the system and validate its feasibility based on the power transfer efficiency and the receiving power.The experimental results demonstrate that when the receiving coil is located at the center of the coil pair,the receiving power is 1416 mW and the power transfer efficiency is 3.96%.Additionally,when the receiving coil operates in the central plane,it can receive sufficient energy regardless of the orientation.
基金Supported by the National Natural Science Foundation of China (No.60372055)National High Technology Research and Development Project of China (No.2003AA123320)the National Doctoral Foundation of China (No.20020698024,No.20030698027).
文摘Based on the Complex Orthogonal Linear Dispersion (COLD) code,a novel linear Differ- ential Space-Time Modulation (DSTM) design is proposed in this paper.Compared with the existing nonlinear DSTM schemes based on group codes,the proposed linear DSTM scheme is easier to design, enjoys full diversity and allows for a simplified differential receiver,which can detect the transmitted symbols separately.Furthermore,compared with the existing linear DSTM based on orthogonal design, our new construction can be applied to any number of transmit antennas.Similar to other algorithms, the proposed scheme also can be demodulated with or without channel estimates at the receiver,but the performance degrades approximately by 3dB when estimates are not available.
基金Supported bv the National Nature Science Foundation of China （ No. 603905405 ）. and the National High Teehnology Research ＆ Development Program of China （No. 2003AA12331005）.
文摘Previously proposed differential modulation schemes for time-varying channels may not achieve the full transmit diversity and the maximum Doppler diversity simultaneously. Based on an existing basis expansion model, a new differential space-time code, which wisely combines interleaver/de-interleaver with traditonal space-time transmitting technique to overcome such limitation, .is presented. Two noncoherent differential decoders, named decision-feedback differential detector （DF-DD） and Viterbi-algorithmbased multiple-symbol-detection differential detector （ MSD-DD）, are also derived. We show that our design may recover data symbols with full antenna diversity and the maximum Doppler diversity at high signal-to-noise ratio. System performance is evaluated with simulations.
