This work used artificial neural network(ANN)to predict the heat transfer rates of shell-and-tube heatexchangers with segmental baffles or continuous helical baffles,based on limited experimental data.The BackPropagat...This work used artificial neural network(ANN)to predict the heat transfer rates of shell-and-tube heatexchangers with segmental baffles or continuous helical baffles,based on limited experimental data.The BackPropagation (BP) algorithm was used in training the networks.Different network configurations were alsostudied.The deviation between the predicted results and experimental data was less than 2%.Comparison withcorrelation for prediction shows ANN superiority.It is recommended that ANN can be easily used to predict theperformances of thermal systems in engineering applications,especially to model heat exchangers for heattransfer analysis.展开更多
When examining the file transfer performance in a peer-to-peer file sharing system, a fundamental problem is how to describe the service rate for a file transfer. In this paper, the problem is examined by analyzing th...When examining the file transfer performance in a peer-to-peer file sharing system, a fundamental problem is how to describe the service rate for a file transfer. In this paper, the problem is examined by analyzing the distribution of server-like nodes' upstream-bandwidth among their concurrent transfers. A sufficient condition for the service rate, what a receiver obtains for downloading a file, to asymptotically be uniform is presented. On the aggregate service rate for transferring a file in a system, a sufficient condition for it to asymptotically follow a Zipf distribution is presented. These asymptotic equalities are both in the mean square sense. These analyses and the sufficient conditions provide a mathematic base for modeling file transfer processes in peer-to-peer file sharing systems.展开更多
The cold chain environment is an important route for the long⁃distance transmission of pathogenic micro⁃organisms.In this study,we explored the mechanisms of secondary propagation through surface contact on cold surfa...The cold chain environment is an important route for the long⁃distance transmission of pathogenic micro⁃organisms.In this study,we explored the mechanisms of secondary propagation through surface contact on cold surfaces.A quantitative statistical experimental method was adopted to study the surface⁃contact transmission of micro⁃organisms,wherein the transfer rate of surface contact was the dependent variable and Escherichia coli was used as the indicator bacterium.The effects of contact pressure(0.44,0.86,1.55,2.25,and 2.94 N/cm^(2)),contact time(0,15,30,45,and 60 s),contact angle(15°and 25°),and surface materials(rubber and cotton gloves)were measured at two storage temperatures:cold storage(5℃)and freezing(-18℃).The results showed that as temperature decreases,the transfer of micro⁃organisms through surface contact becomes less probable.The contact time did not significantly influence the transfer rate of micro⁃organisms when items were handled at cold⁃storage temperatures.Based on these results,we recommend placing items as flat as possible to minimize the tilt angle when handling them at cold⁃storage temperatures.Additionally,if the tilt angle cannot be avoided,rubber gloves should be used when handling items stored at large tilt angles,whereas cotton gloves may be used for items placed at smaller angles.展开更多
An experimental study on intensifying osmotic dehydration was carried out ina state of nature and with acoustic cavitation of different cavitating intensity (0.5A, 0.7A and0.9A) respectively, in which the material is ...An experimental study on intensifying osmotic dehydration was carried out ina state of nature and with acoustic cavitation of different cavitating intensity (0.5A, 0.7A and0.9A) respectively, in which the material is apple slice of 5mm thickness. The result showed thatacoustic cavitation remarkably enhanced the osmotic dehydration, and the water loss was acceleratedwith the increase of cavitating intensity. The water diffusivity coefficients ranged from1.8x10^(-10)m^2·s^(-1) at 0.5A to 2.6x10^(-10)m^2·s^(-1) at 0.9A, and solute diffusivitycoefficients ranged from 3.5x10^(-11) m^2·s^(-1) at 0.5A to 4.6X10^(-11)m^2·s^(-1) at 0.9A. On thebasis of experiments, a mathematical model was established about mass transfer during osmoticdehydration, and the numerical simulation was carried out. The calculated results agree well withexperimental data, and represent the rule of mass transfer during osmotic dehydration intensified byacoustic cavitation.展开更多
By measuring the mass transfer coefficient of benzoic acid between water and oil, the oxygen transfer rate in BOF bath was researched, and the influence of top and bottom blowing gas flow rate on the mass transfer bet...By measuring the mass transfer coefficient of benzoic acid between water and oil, the oxygen transfer rate in BOF bath was researched, and the influence of top and bottom blowing gas flow rate on the mass transfer between metal and slag was discussed. The results show that with increasing the bottom blowing gas flow rate under the conditions of fixed top blowing, the mass transfer rate evidently increases, and the influence of fixed top blowing on the mass transfer is 10% of bottom blowing. The stirring intensity was determined as a function of top blowing gas flow rate, bottom blowing gas flow rate, and lance height. The equation of the mass transfer coefficient between metal and slag was established. The relationship between the emulsification ratio of oil to water and the bottom blowing gas flow rate under the conditions of top and bottom blowing was obtained. The result shows that with the increase in the bottom blowing gas flow rate, the emulsification ratio increases linearly, which increases the mass transfer rate of benzoic acid between water and oil.展开更多
The interfacial oxygen transfer rate is one of the main factors to control the composition of alloys.The commonly employed method of studying the interfacial oxygen transfer rate is the chemical composition analysis;h...The interfacial oxygen transfer rate is one of the main factors to control the composition of alloys.The commonly employed method of studying the interfacial oxygen transfer rate is the chemical composition analysis;however,it is difficult to be studied in situ.Here,a new method of measuring the oxygen transfer rate at the gas-slag and slag-metal interfaces was reported based on electrochemical analyses.The interfacial oxygen transfer rate in the smelting process of Inconel 718 superalloy was investigated at 1723,1773,1823,and 1873 K.The experimental results show that the electrochemical method can measure the real-time oxygen content;hence,this method is promising in controlling the oxygen content in alloys.As the temperature increased,both the equilibrium oxygen content and the rate of oxygen absorption increased significantly,and the increase was the most obvious when the temperature was 1873 K.The possible reason is that the increase in temperature weakens the mass transfer resistance of the electric double layer at the interface,thus accelerating the oxygen transfer rate.展开更多
Electron donors(EDs)are widely used to improve the H 2 production performance of Schottky junction photocatalysts,but the functions of EDs are still unknown from the perspective of electron transfer dy-namics.Herein,P...Electron donors(EDs)are widely used to improve the H 2 production performance of Schottky junction photocatalysts,but the functions of EDs are still unknown from the perspective of electron transfer dy-namics.Herein,Pt nanocluster-decorated CdS nanorod is successfully prepared to construct a typical CdS/Pt Schottky junction.Pt nanoclusters with a diameter of∼2 nm are deposited on the surface of CdS nanorods by in situ photoreduction at sub-zero temperature.The CdS/Pt photocatalyst using lactic acid shows a higher H_(2)production rate of 4762μmol g^(-1)h^(-1)compared to that using methanol,tri-ethanolamine,and glycerol.To understand the cause,the dynamics of photogenerated carriers in CdS/Pt photocatalysts during ED-assisted H_(2)production are revealed by femtosecond transient absorption spec-troscopy.Among the four organic EDs,lactic acid enables the fastest electron transfer rate of 1.8×10^(9)s^(-1)and the highest electron transfer efficiency of 76%at the CdS/Pt interface due to the most efficient hole consumption.This work sheds light on the importance of efficient interfacial electron transfer for im-proving the photocatalytic performance of Schottky junction photocatalysts.展开更多
In wastewater treatment plants（WWTPs）using the activated sludge process,two methods are widely used to improve aeration efficiency — use of high-efficiency aeration devices and optimizing the aeration control strat...In wastewater treatment plants（WWTPs）using the activated sludge process,two methods are widely used to improve aeration efficiency — use of high-efficiency aeration devices and optimizing the aeration control strategy. Aeration efficiency is closely linked to sludge characteristics（such as concentrations of mixed liquor suspended solids（MLSS）and microbial communities）and operating conditions（such as air flow rate and operational dissolved oxygen（DO）concentrations）. Moreover,operational DO is closely linked to effluent quality. This study,which is in reference to WWTP discharge class A Chinese standard effluent criteria,determined the growth kinetics parameters of nitrifiers at different DO levels in small-scale tests. Results showed that the activated sludge system could meet effluent criteria when DO was as low as 0.3 mg/L,and that nitrifier communities cultivated under low DO conditions had higher oxygen affinity than those cultivated under high DO conditions,as indicated by the oxygen half-saturation constant and nitrification ability. Based on nitrifier growth kinetics and on the oxygen mass transfer dynamic model（determined using different air flow rate（Q′air）and mixed liquor volatile suspended solids（MLVSS）values）,theoretical analysis indicated limited potential for energy saving by improving aeration diffuser performance when the activated sludge system had low oxygen consumption; however,operating at low DO and low MLVSS could significantly reduce energy consumption. Finally,a control strategy coupling sludge retention time and MLVSS to minimize the DO level was discussed,which is critical to appropriate setting of the oxygen point and to the operation of low DO treatment technology.展开更多
This article investigates the colloidal study for water and ethylene glycol based nanofluids.The effects of Lorentz forces and thermal radiation are considered.The process of non-dimensionalities of governing equation...This article investigates the colloidal study for water and ethylene glycol based nanofluids.The effects of Lorentz forces and thermal radiation are considered.The process of non-dimensionalities of governing equations is carried out successfully by means of similarity variables.Then,the resultant nonlinear nature of flow model is treated numerically via Runge-Kutta scheme.The characteristics of various pertinent flow parameters on the velocity,temperature,streamlines and isotherms are discussed graphically.It is inspected that the Lorentz forces favors the rotational velocity and rotational parameter opposes it.Intensification in the nanofluids temperature is observed for volumetric fraction and thermal radiation parameter and dominating trend is noted for γ-aluminum nanofluid.Furthermore,for higher rotational parameter,reverse flow is investigated.To provoke the validity of the present work,comparison between current and literature results is presented which shows an excellent agreement.It is examined that rotation favors the velocity of the fluid and more radiative fluid enhances the fluid temperature.Moreover,it is inspected that upturns in volumetric fraction improves the thermal and electrical conductivities.展开更多
The effect of disturbed flow on the mass trans- fer from arterial surface to flowing blood was studied nu- merically, and the results were compared with that of our previous work. The arterial wall was assumed to be v...The effect of disturbed flow on the mass trans- fer from arterial surface to flowing blood was studied nu- merically, and the results were compared with that of our previous work. The arterial wall was assumed to be vis- coelastic and the blood was assumed to be incompressible and non-Newtonian fluid, which is more close to human arte- rial system. Numerical results indicated that the mass trans- fer from the arterial surface to flowing blood in regions of disturbed flow is positively related with the wall shear rates and it is significantly enhanced in regions of disturbed flow with a local minimum around the reattachment point which is higher than the average value of the downstream. There- fore, it may be implied that the accumulation of cholesterol or lipids within atheromatous plaques is not caused by the reduced efflux of cholesterol or lipids, but by the infiltration of the LDL （low-density lipoprotein） from the flowing blood to the arterial wall.展开更多
To improve the efficiency of the steelmaking process,a system of self-rotating lance was designed,and corresponding cold simulation mechanism was developed.The influence of the self-rotating lance on the mass transfer...To improve the efficiency of the steelmaking process,a system of self-rotating lance was designed,and corresponding cold simulation mechanism was developed.The influence of the self-rotating lance on the mass transfer rate between slag and molten steel was investigated by comparing this novel system with the traditional oxygen lance.The results show that the self-rotating lance can stably rotate with a gas jet as the power source.The mass transfer rate increases with an increase in the top and bottom blow flow rates and with a decline in the lance position.Approximately 13.7% of the top blow flow rate is converted to stirring energy,which is approximately twice that of the traditional oxygen lance,and the mass transfer rate can increase by over 30%.Furthermore,the impact energy can be concentrated at different depths of the molten bath by adjusting the rotational speed.With the same energy density,the mass transfer rate produced by the self-rotating lance is higher;however,the influence of the energy density on the mass transfer rate is low when the rotational speed is 30-50 r/min.展开更多
This work investigates the steam condensation phenomena in an air-cooled condenser.The considered horizontal flattened tube has a 30 mm hydraulic diameter,and its length is a function of the steam quality with a limit...This work investigates the steam condensation phenomena in an air-cooled condenser.The considered horizontal flattened tube has a 30 mm hydraulic diameter,and its length is a function of the steam quality with a limit value between 0.95 and 0.05.The mass flow rate ranges from 4 to 40 kg/m^(2).s with a saturated temperature spanning an interval from 40°C to 80°C.A special approach has been implemented using the Engineering Equation Solver(EES)to solve a series of equations for the two-phase flow pattern and the related heat transfer coefficients.A wavy-stratified structure of the two-phase flow has been found when the mass rate was between 4 and 24 kg/m^(2).s.In contrast,an initially annular flow is gradually converted into a wavy stratified flow(due to the condensation process taking place inside the flattened tube)when the considered range ranges from 32 to 40 kg/m^(2).s.展开更多
After the electron transfers from the metal electrode to the Fe3+(H2O)(6) ion, the free energy of activation of this electron transfer reaction is calculated, then using the transition probability which is calculated ...After the electron transfers from the metal electrode to the Fe3+(H2O)(6) ion, the free energy of activation of this electron transfer reaction is calculated, then using the transition probability which is calculated by the perturbed degeneration theory and the Fermi golden rule,, the rate constant is gotten. Compared with the experimental results, it is satisfactory.展开更多
Electrocatalytic conversion of renewable biomass is emerging as a promising route for sustainable chemical production;hence it urgently calls for developing efficient electrocatalysts with low potentials and high curr...Electrocatalytic conversion of renewable biomass is emerging as a promising route for sustainable chemical production;hence it urgently calls for developing efficient electrocatalysts with low potentials and high current densities.Herein,a Pr-doped Co(OH)_(2)hexagonal sheet(Pr/Co=1/9,in mole)is synthesized by electrodeposition as highly performant catalyst for 5-hydroxymethylfurfural(HMF)oxidation reaction(HMFOR)to produce 2,5-furandicarboxylic acid(FDCA).This novel and low-cost catalyst possesses a rather low onset potential of 1.05 V(vs.RHE)and requires only 1.10 V(vs.RHE)to reach a current density of 10 mA cm^(-2)for HMFOR,significantly outperforming Co(OH)_(2)benchmark(i.e.,210 mV higher to reach10 m A cm^(-2)).The origin of Pr promotion effect as well as the evolution of CoOOH catalytic sites and HMFOR process has been deeply elucidated by physical characterizations,kinetic experiments,in situ electrochemical techniques,and theoretical calculations.The unique Pr-ameliorated CoOOH active centers enable 100%conversion of HMF,99.6%selectivity of FDCA,and 99.7%Faraday efficiency,with a superior cycling durability toward HMFOR.This can be one of the most outstanding results for Co-based HMFOR catalysts to date in the literature.Thereby this work can help open up new horizons for constructing novel and efficient Co-based electrocatalysts by the utilization of lanthanide elements.展开更多
Two long-term slow slip events(SSEs) in Lower Cook Inlet, Alaska, were identified by Li SS et al.(2016). The earlier SSE lasted at least 9 years with M_(w) ~7.8 and had an average slip rate of ~82 mm/year. The latter ...Two long-term slow slip events(SSEs) in Lower Cook Inlet, Alaska, were identified by Li SS et al.(2016). The earlier SSE lasted at least 9 years with M_(w) ~7.8 and had an average slip rate of ~82 mm/year. The latter SSE, occurring in a similar area, lasted approximately 2 years with M_(w) ~7.2 and an average slip rate of ~91 mm/year. To test whether these SSEs triggered earthquakes near the slow slip area, we calculated the Coulomb stressing rate changes on receiver faults by using two fault geometry definitions: nodal planes of focal mechanism solutions of past earthquakes, and optimally oriented fault planes. Regions in the shallow slab(30–60 km) that experienced a significant increase in the Coulomb stressing rate due to slip by the SSEs showed an increase in seismicity rates during SSE periods. No correlation was found in the volumes that underwent a significant increase in the Coulomb stressing rate during the SSE within the crust and the intermediate slab. We modeled variations in seismicity rates by using a combination of the Coulomb stress transfer model and the framework of rate-and-state friction. Our model indicated that the SSEs increased the Coulomb stress changes on adjacent faults,thereby increasing the seismicity rates even though the ratio of the SSE stressing rate to the background stressing rate was small. Each long-term SSE in Alaska brought the megathrust updip of the SSE areas closer to failure by up to 0.1–0.15 MPa. The volumes of significant Coulomb stress changes caused by the Upper and Lower Cook Inlet SSEs did not overlap.展开更多
The changes of chlorophyll_protein complexes and photosynthetic activities of chloroplast isolated from lotus ( Nelumbo nucifera Gaertn.) seeds germinating under illumination were studied. SDS PAGE analysis of c...The changes of chlorophyll_protein complexes and photosynthetic activities of chloroplast isolated from lotus ( Nelumbo nucifera Gaertn.) seeds germinating under illumination were studied. SDS PAGE analysis of chlorophyll_protein complexes showed that there was only the light harvesting chlorophyll a/b protein complex from PSⅡ (LHCⅡ) precursor in chloroplast from lotus seeds germinated for 2 to 6 days, while LHC Ⅱ 1, and the chlorophyll_protein complex of PSⅠ (CPⅠ) appeared on the 8th day of germination and PSⅡ reaction center complex appeared later. Studies on the polypeptides composition of the chloroplast revealed the following results: 1) Small amount of the 27 kD polypeptide was synthesized in invisible light; 2) The 30 kD polypeptide existed previously in the plumules of the dry seeds; 3) The amount of the 30 kD polypeptide was more than any other polypeptides before germination and decreased gradually throughout germination, while the 27 kD polypeptide changed in the opposite way; 4) In the process of germination, measurement of the electron transport rate and the fluorescence induction kinetics at room temperature showed that PSⅡ activities and efficiency of primary light energy transformation were only experimentally measurable after 7 days of germination and gradually increased afterwards. At the same time, the chl a/b ratio rose from the lower value to normal; 5) The changes of chloroplast membrane components and its functions are concomitant in concert with that of the ultrastructure of chloroplast membranes during germination, as shown in our earlier work . The results have proved again that a different developmental pathway of chloroplast is likely to exist in the lotus plumules, which might provide an important clue for N. nucifera in having an unique position in the phylogeny of the angiosperm.展开更多
Simultaneous nitrification and denitrification （SND） effect and phosphor removal were investigated in a one-staged aerobic submerged membrane bioreactor on pilot-scale with mixed liquor suspended solids （MLSS） 19-...Simultaneous nitrification and denitrification （SND） effect and phosphor removal were investigated in a one-staged aerobic submerged membrane bioreactor on pilot-scale with mixed liquor suspended solids （MLSS） 19--20 g/L. The effects of DO concentration, sludge floc size distribution on SND were studied. Test results suggested that SND was successfully performed in the membrane bioreactor （MBR） and about 70% total nitrogen removal efficiency was achieved when DO concentration was set to 0.2-- 0.3 mg/L. The main mechanisms governing SND were the suitable sludge floc size and the low DO concentration which was caused by low oxygen transfer rate with such a high MLSS concentration in the MBR. In the meantime, phosphor removal was also studied with polymer ferric sulfate （PFS） addition and 14 mg/L dosage of PFS was proper for the MBR to remove phosphor. PFS addition also benefited the MBR operation owing to its reduction of extracellular polymer substances （EPS） of mixed liquor.展开更多
Lithium-ion batteries(LIBs)have shown considerable promise as an energy storage system due to their high conversion efficiency,size options(from coin cell to grid storage),and free of gaseous exhaust.For LIBs,power de...Lithium-ion batteries(LIBs)have shown considerable promise as an energy storage system due to their high conversion efficiency,size options(from coin cell to grid storage),and free of gaseous exhaust.For LIBs,power density and energy density are two of the most important parameters for their practical use,and the power density is the key factor for applications such as fast-charging electric vehicles,high-power portable tools,and power grid stabilization.A high rate of performance is also required for devices that store electrical energy from seasonal or irregular energy sources,such as wind energy and wave energy.Significant efforts have been made over the last several years to improve the power density of LIBs through anodes,cathodes,and electrolytes,and much progress has been made.To provide a comprehensive picture of these recent achievements,this review discusses the progress made in high-power LIBs from 2013 to the present,including general and fundamental principles of high-power LIBs,challenges facing LIB development today,and an outlook for future LIB development.展开更多
The mechanism for heat transfer of radiation is usually adopted to heat strip in vertical continuous annealing furnace. The rate of heat transfer among strip and other objects can be hugely affected by the parameters ...The mechanism for heat transfer of radiation is usually adopted to heat strip in vertical continuous annealing furnace. The rate of heat transfer among strip and other objects can be hugely affected by the parameters of strip speed, geometry factors and radiating characteristic of surfaces of strip, radiating tubes and walls of furnace. A model including all parameters is proposed for calculating the heat transfer coefficient, predicting the strip tempera- ture and boundary temperature of strip through analyzing these parameters. The boundary temperature is a important datum and different from average arithmetic value of temperature of strip and temperature in furnace. Also, the model can be used to analyze the relation for temperature of strip and heat transfer coefficient, total heat transfer quantity and heating time. The model is built by using the radiating heat transfer rate, the Newtonrs law of cooling, and lumped system analysis. The results of calculation are compared to the data from production line. The comparisons indicate that the model can well predict the heating process. The model is already applied for process control in pro- duction line. Also, this research will provide a new method for analyzing the radiation heat transfer.展开更多
Due to a prolonged operation time and low mass transfer efficiency, the primary challenge in the aeration process of non-Newtonian fluids is the high energy consumption, which is closely related to the form and rate o...Due to a prolonged operation time and low mass transfer efficiency, the primary challenge in the aeration process of non-Newtonian fluids is the high energy consumption, which is closely related to the form and rate of impeller, ventilation, rheological properties and bubble morphology in the reactor. In this perspective, through optimal computational fluid dynamics models and experiments, the relationship between power consumption, volumetric mass transfer rate(kLa) and initial bubble size(d0) was constructed to establish an efficient operation mode for the aeration process of non-Newtonian fluids. It was found that reducing the d0could significantly increase the oxygen mass transfer rate, resulting in an obvious decrease in the ventilation volume and impeller speed. When d0was regulated within 2-5 mm,an optimal kLa could be achieved, and 21% of power consumption could be saved, compared to the case of bubbles with a diameter of 10 mm.展开更多
文摘This work used artificial neural network(ANN)to predict the heat transfer rates of shell-and-tube heatexchangers with segmental baffles or continuous helical baffles,based on limited experimental data.The BackPropagation (BP) algorithm was used in training the networks.Different network configurations were alsostudied.The deviation between the predicted results and experimental data was less than 2%.Comparison withcorrelation for prediction shows ANN superiority.It is recommended that ANN can be easily used to predict theperformances of thermal systems in engineering applications,especially to model heat exchangers for heattransfer analysis.
基金National High Technology Research and Development Program of China (No.2007AA01Z457)Shanghai Science and Technology Development Fundation,China(No.07QA14033)
文摘When examining the file transfer performance in a peer-to-peer file sharing system, a fundamental problem is how to describe the service rate for a file transfer. In this paper, the problem is examined by analyzing the distribution of server-like nodes' upstream-bandwidth among their concurrent transfers. A sufficient condition for the service rate, what a receiver obtains for downloading a file, to asymptotically be uniform is presented. On the aggregate service rate for transferring a file in a system, a sufficient condition for it to asymptotically follow a Zipf distribution is presented. These asymptotic equalities are both in the mean square sense. These analyses and the sufficient conditions provide a mathematic base for modeling file transfer processes in peer-to-peer file sharing systems.
基金National Natural Science Foundation of China(Grant No.52278121).
文摘The cold chain environment is an important route for the long⁃distance transmission of pathogenic micro⁃organisms.In this study,we explored the mechanisms of secondary propagation through surface contact on cold surfaces.A quantitative statistical experimental method was adopted to study the surface⁃contact transmission of micro⁃organisms,wherein the transfer rate of surface contact was the dependent variable and Escherichia coli was used as the indicator bacterium.The effects of contact pressure(0.44,0.86,1.55,2.25,and 2.94 N/cm^(2)),contact time(0,15,30,45,and 60 s),contact angle(15°and 25°),and surface materials(rubber and cotton gloves)were measured at two storage temperatures:cold storage(5℃)and freezing(-18℃).The results showed that as temperature decreases,the transfer of micro⁃organisms through surface contact becomes less probable.The contact time did not significantly influence the transfer rate of micro⁃organisms when items were handled at cold⁃storage temperatures.Based on these results,we recommend placing items as flat as possible to minimize the tilt angle when handling them at cold⁃storage temperatures.Additionally,if the tilt angle cannot be avoided,rubber gloves should be used when handling items stored at large tilt angles,whereas cotton gloves may be used for items placed at smaller angles.
文摘An experimental study on intensifying osmotic dehydration was carried out ina state of nature and with acoustic cavitation of different cavitating intensity (0.5A, 0.7A and0.9A) respectively, in which the material is apple slice of 5mm thickness. The result showed thatacoustic cavitation remarkably enhanced the osmotic dehydration, and the water loss was acceleratedwith the increase of cavitating intensity. The water diffusivity coefficients ranged from1.8x10^(-10)m^2·s^(-1) at 0.5A to 2.6x10^(-10)m^2·s^(-1) at 0.9A, and solute diffusivitycoefficients ranged from 3.5x10^(-11) m^2·s^(-1) at 0.5A to 4.6X10^(-11)m^2·s^(-1) at 0.9A. On thebasis of experiments, a mathematical model was established about mass transfer during osmoticdehydration, and the numerical simulation was carried out. The calculated results agree well withexperimental data, and represent the rule of mass transfer during osmotic dehydration intensified byacoustic cavitation.
基金Item Sponsored by National Science and Technology Support Program for 11th Five-Year Plan of China (2006BAE03A00)
文摘By measuring the mass transfer coefficient of benzoic acid between water and oil, the oxygen transfer rate in BOF bath was researched, and the influence of top and bottom blowing gas flow rate on the mass transfer between metal and slag was discussed. The results show that with increasing the bottom blowing gas flow rate under the conditions of fixed top blowing, the mass transfer rate evidently increases, and the influence of fixed top blowing on the mass transfer is 10% of bottom blowing. The stirring intensity was determined as a function of top blowing gas flow rate, bottom blowing gas flow rate, and lance height. The equation of the mass transfer coefficient between metal and slag was established. The relationship between the emulsification ratio of oil to water and the bottom blowing gas flow rate under the conditions of top and bottom blowing was obtained. The result shows that with the increase in the bottom blowing gas flow rate, the emulsification ratio increases linearly, which increases the mass transfer rate of benzoic acid between water and oil.
基金gratefully express their appreciation to National Natural Science Foundation of China(Nos.51974153 and U1960203)the Joint Fund of State Key Laboratory of Marine Engineering and University of Science and Technology Liaoning(SKLMEA-USTL-201707)the China Scholarship Council(201908210457).
文摘The interfacial oxygen transfer rate is one of the main factors to control the composition of alloys.The commonly employed method of studying the interfacial oxygen transfer rate is the chemical composition analysis;however,it is difficult to be studied in situ.Here,a new method of measuring the oxygen transfer rate at the gas-slag and slag-metal interfaces was reported based on electrochemical analyses.The interfacial oxygen transfer rate in the smelting process of Inconel 718 superalloy was investigated at 1723,1773,1823,and 1873 K.The experimental results show that the electrochemical method can measure the real-time oxygen content;hence,this method is promising in controlling the oxygen content in alloys.As the temperature increased,both the equilibrium oxygen content and the rate of oxygen absorption increased significantly,and the increase was the most obvious when the temperature was 1873 K.The possible reason is that the increase in temperature weakens the mass transfer resistance of the electric double layer at the interface,thus accelerating the oxygen transfer rate.
基金the National Key Research and Development Program of China(Nos.2022YFB3803600 and 2018YFB1502001)National Natural Science Foundation of China(Nos.22238009,51932007,U1905215,52073223,52173065,and 52202375)+2 种基金the Natural Science Foundation of Hubei Province of China(No.2022CFA001)China Postdoctoral Science Foundation(Nos.2021TQ0311 and 2021M702990)International Postdoc-toral Exchange Fellowship Program(No.PC2022051).
文摘Electron donors(EDs)are widely used to improve the H 2 production performance of Schottky junction photocatalysts,but the functions of EDs are still unknown from the perspective of electron transfer dy-namics.Herein,Pt nanocluster-decorated CdS nanorod is successfully prepared to construct a typical CdS/Pt Schottky junction.Pt nanoclusters with a diameter of∼2 nm are deposited on the surface of CdS nanorods by in situ photoreduction at sub-zero temperature.The CdS/Pt photocatalyst using lactic acid shows a higher H_(2)production rate of 4762μmol g^(-1)h^(-1)compared to that using methanol,tri-ethanolamine,and glycerol.To understand the cause,the dynamics of photogenerated carriers in CdS/Pt photocatalysts during ED-assisted H_(2)production are revealed by femtosecond transient absorption spec-troscopy.Among the four organic EDs,lactic acid enables the fastest electron transfer rate of 1.8×10^(9)s^(-1)and the highest electron transfer efficiency of 76%at the CdS/Pt interface due to the most efficient hole consumption.This work sheds light on the importance of efficient interfacial electron transfer for im-proving the photocatalytic performance of Schottky junction photocatalysts.
基金supported by the National Science and Technology Major Project(No.2013ZX07314-001)
文摘In wastewater treatment plants（WWTPs）using the activated sludge process,two methods are widely used to improve aeration efficiency — use of high-efficiency aeration devices and optimizing the aeration control strategy. Aeration efficiency is closely linked to sludge characteristics（such as concentrations of mixed liquor suspended solids（MLSS）and microbial communities）and operating conditions（such as air flow rate and operational dissolved oxygen（DO）concentrations）. Moreover,operational DO is closely linked to effluent quality. This study,which is in reference to WWTP discharge class A Chinese standard effluent criteria,determined the growth kinetics parameters of nitrifiers at different DO levels in small-scale tests. Results showed that the activated sludge system could meet effluent criteria when DO was as low as 0.3 mg/L,and that nitrifier communities cultivated under low DO conditions had higher oxygen affinity than those cultivated under high DO conditions,as indicated by the oxygen half-saturation constant and nitrification ability. Based on nitrifier growth kinetics and on the oxygen mass transfer dynamic model（determined using different air flow rate（Q′air）and mixed liquor volatile suspended solids（MLVSS）values）,theoretical analysis indicated limited potential for energy saving by improving aeration diffuser performance when the activated sludge system had low oxygen consumption; however,operating at low DO and low MLVSS could significantly reduce energy consumption. Finally,a control strategy coupling sludge retention time and MLVSS to minimize the DO level was discussed,which is critical to appropriate setting of the oxygen point and to the operation of low DO treatment technology.
文摘This article investigates the colloidal study for water and ethylene glycol based nanofluids.The effects of Lorentz forces and thermal radiation are considered.The process of non-dimensionalities of governing equations is carried out successfully by means of similarity variables.Then,the resultant nonlinear nature of flow model is treated numerically via Runge-Kutta scheme.The characteristics of various pertinent flow parameters on the velocity,temperature,streamlines and isotherms are discussed graphically.It is inspected that the Lorentz forces favors the rotational velocity and rotational parameter opposes it.Intensification in the nanofluids temperature is observed for volumetric fraction and thermal radiation parameter and dominating trend is noted for γ-aluminum nanofluid.Furthermore,for higher rotational parameter,reverse flow is investigated.To provoke the validity of the present work,comparison between current and literature results is presented which shows an excellent agreement.It is examined that rotation favors the velocity of the fluid and more radiative fluid enhances the fluid temperature.Moreover,it is inspected that upturns in volumetric fraction improves the thermal and electrical conductivities.
基金supported by the National Natural Science Foundation of China (10672090,11002034,11072055 and 11032008)the National High Technology Research and Development Program of China (2006AA02Z4E8)the China Postdoctoral Science Foundation
文摘The effect of disturbed flow on the mass trans- fer from arterial surface to flowing blood was studied nu- merically, and the results were compared with that of our previous work. The arterial wall was assumed to be vis- coelastic and the blood was assumed to be incompressible and non-Newtonian fluid, which is more close to human arte- rial system. Numerical results indicated that the mass trans- fer from the arterial surface to flowing blood in regions of disturbed flow is positively related with the wall shear rates and it is significantly enhanced in regions of disturbed flow with a local minimum around the reattachment point which is higher than the average value of the downstream. There- fore, it may be implied that the accumulation of cholesterol or lipids within atheromatous plaques is not caused by the reduced efflux of cholesterol or lipids, but by the infiltration of the LDL （low-density lipoprotein） from the flowing blood to the arterial wall.
基金the National Key Research and Development Program with Project Number 2017YFB0304000the Beijing Natural Science Foundation with Project Number 2172057 in China.
文摘To improve the efficiency of the steelmaking process,a system of self-rotating lance was designed,and corresponding cold simulation mechanism was developed.The influence of the self-rotating lance on the mass transfer rate between slag and molten steel was investigated by comparing this novel system with the traditional oxygen lance.The results show that the self-rotating lance can stably rotate with a gas jet as the power source.The mass transfer rate increases with an increase in the top and bottom blow flow rates and with a decline in the lance position.Approximately 13.7% of the top blow flow rate is converted to stirring energy,which is approximately twice that of the traditional oxygen lance,and the mass transfer rate can increase by over 30%.Furthermore,the impact energy can be concentrated at different depths of the molten bath by adjusting the rotational speed.With the same energy density,the mass transfer rate produced by the self-rotating lance is higher;however,the influence of the energy density on the mass transfer rate is low when the rotational speed is 30-50 r/min.
文摘This work investigates the steam condensation phenomena in an air-cooled condenser.The considered horizontal flattened tube has a 30 mm hydraulic diameter,and its length is a function of the steam quality with a limit value between 0.95 and 0.05.The mass flow rate ranges from 4 to 40 kg/m^(2).s with a saturated temperature spanning an interval from 40°C to 80°C.A special approach has been implemented using the Engineering Equation Solver(EES)to solve a series of equations for the two-phase flow pattern and the related heat transfer coefficients.A wavy-stratified structure of the two-phase flow has been found when the mass rate was between 4 and 24 kg/m^(2).s.In contrast,an initially annular flow is gradually converted into a wavy stratified flow(due to the condensation process taking place inside the flattened tube)when the considered range ranges from 32 to 40 kg/m^(2).s.
文摘After the electron transfers from the metal electrode to the Fe3+(H2O)(6) ion, the free energy of activation of this electron transfer reaction is calculated, then using the transition probability which is calculated by the perturbed degeneration theory and the Fermi golden rule,, the rate constant is gotten. Compared with the experimental results, it is satisfactory.
基金National Natural Science Foundation of China(No.22272149,22062025)Yunnan University’s Research Innovation Fund for Graduate Students(No.KC-23234085)+1 种基金Workstation of Academician Chen Jing of Yunnan Province(No.202105AF150012)Free Exploration Fund for Academician(No.202405AA350001)。
文摘Electrocatalytic conversion of renewable biomass is emerging as a promising route for sustainable chemical production;hence it urgently calls for developing efficient electrocatalysts with low potentials and high current densities.Herein,a Pr-doped Co(OH)_(2)hexagonal sheet(Pr/Co=1/9,in mole)is synthesized by electrodeposition as highly performant catalyst for 5-hydroxymethylfurfural(HMF)oxidation reaction(HMFOR)to produce 2,5-furandicarboxylic acid(FDCA).This novel and low-cost catalyst possesses a rather low onset potential of 1.05 V(vs.RHE)and requires only 1.10 V(vs.RHE)to reach a current density of 10 mA cm^(-2)for HMFOR,significantly outperforming Co(OH)_(2)benchmark(i.e.,210 mV higher to reach10 m A cm^(-2)).The origin of Pr promotion effect as well as the evolution of CoOOH catalytic sites and HMFOR process has been deeply elucidated by physical characterizations,kinetic experiments,in situ electrochemical techniques,and theoretical calculations.The unique Pr-ameliorated CoOOH active centers enable 100%conversion of HMF,99.6%selectivity of FDCA,and 99.7%Faraday efficiency,with a superior cycling durability toward HMFOR.This can be one of the most outstanding results for Co-based HMFOR catalysts to date in the literature.Thereby this work can help open up new horizons for constructing novel and efficient Co-based electrocatalysts by the utilization of lanthanide elements.
基金supported by the National Natural Science Foundation of China (Grant No. 42104001)。
文摘Two long-term slow slip events(SSEs) in Lower Cook Inlet, Alaska, were identified by Li SS et al.(2016). The earlier SSE lasted at least 9 years with M_(w) ~7.8 and had an average slip rate of ~82 mm/year. The latter SSE, occurring in a similar area, lasted approximately 2 years with M_(w) ~7.2 and an average slip rate of ~91 mm/year. To test whether these SSEs triggered earthquakes near the slow slip area, we calculated the Coulomb stressing rate changes on receiver faults by using two fault geometry definitions: nodal planes of focal mechanism solutions of past earthquakes, and optimally oriented fault planes. Regions in the shallow slab(30–60 km) that experienced a significant increase in the Coulomb stressing rate due to slip by the SSEs showed an increase in seismicity rates during SSE periods. No correlation was found in the volumes that underwent a significant increase in the Coulomb stressing rate during the SSE within the crust and the intermediate slab. We modeled variations in seismicity rates by using a combination of the Coulomb stress transfer model and the framework of rate-and-state friction. Our model indicated that the SSEs increased the Coulomb stress changes on adjacent faults,thereby increasing the seismicity rates even though the ratio of the SSE stressing rate to the background stressing rate was small. Each long-term SSE in Alaska brought the megathrust updip of the SSE areas closer to failure by up to 0.1–0.15 MPa. The volumes of significant Coulomb stress changes caused by the Upper and Lower Cook Inlet SSEs did not overlap.
文摘The changes of chlorophyll_protein complexes and photosynthetic activities of chloroplast isolated from lotus ( Nelumbo nucifera Gaertn.) seeds germinating under illumination were studied. SDS PAGE analysis of chlorophyll_protein complexes showed that there was only the light harvesting chlorophyll a/b protein complex from PSⅡ (LHCⅡ) precursor in chloroplast from lotus seeds germinated for 2 to 6 days, while LHC Ⅱ 1, and the chlorophyll_protein complex of PSⅠ (CPⅠ) appeared on the 8th day of germination and PSⅡ reaction center complex appeared later. Studies on the polypeptides composition of the chloroplast revealed the following results: 1) Small amount of the 27 kD polypeptide was synthesized in invisible light; 2) The 30 kD polypeptide existed previously in the plumules of the dry seeds; 3) The amount of the 30 kD polypeptide was more than any other polypeptides before germination and decreased gradually throughout germination, while the 27 kD polypeptide changed in the opposite way; 4) In the process of germination, measurement of the electron transport rate and the fluorescence induction kinetics at room temperature showed that PSⅡ activities and efficiency of primary light energy transformation were only experimentally measurable after 7 days of germination and gradually increased afterwards. At the same time, the chl a/b ratio rose from the lower value to normal; 5) The changes of chloroplast membrane components and its functions are concomitant in concert with that of the ultrastructure of chloroplast membranes during germination, as shown in our earlier work . The results have proved again that a different developmental pathway of chloroplast is likely to exist in the lotus plumules, which might provide an important clue for N. nucifera in having an unique position in the phylogeny of the angiosperm.
基金The Hi-Tech Research and Development Program (863) of China (No. 2002AA601220)
文摘Simultaneous nitrification and denitrification （SND） effect and phosphor removal were investigated in a one-staged aerobic submerged membrane bioreactor on pilot-scale with mixed liquor suspended solids （MLSS） 19--20 g/L. The effects of DO concentration, sludge floc size distribution on SND were studied. Test results suggested that SND was successfully performed in the membrane bioreactor （MBR） and about 70% total nitrogen removal efficiency was achieved when DO concentration was set to 0.2-- 0.3 mg/L. The main mechanisms governing SND were the suitable sludge floc size and the low DO concentration which was caused by low oxygen transfer rate with such a high MLSS concentration in the MBR. In the meantime, phosphor removal was also studied with polymer ferric sulfate （PFS） addition and 14 mg/L dosage of PFS was proper for the MBR to remove phosphor. PFS addition also benefited the MBR operation owing to its reduction of extracellular polymer substances （EPS） of mixed liquor.
基金financial support from National Natural Science Foundation of China(Grant No.21805079)the Fundamental Research Funds for the Central Universities(531107051077)Hunan high-level talent gathering project(2018RS3054)
文摘Lithium-ion batteries(LIBs)have shown considerable promise as an energy storage system due to their high conversion efficiency,size options(from coin cell to grid storage),and free of gaseous exhaust.For LIBs,power density and energy density are two of the most important parameters for their practical use,and the power density is the key factor for applications such as fast-charging electric vehicles,high-power portable tools,and power grid stabilization.A high rate of performance is also required for devices that store electrical energy from seasonal or irregular energy sources,such as wind energy and wave energy.Significant efforts have been made over the last several years to improve the power density of LIBs through anodes,cathodes,and electrolytes,and much progress has been made.To provide a comprehensive picture of these recent achievements,this review discusses the progress made in high-power LIBs from 2013 to the present,including general and fundamental principles of high-power LIBs,challenges facing LIB development today,and an outlook for future LIB development.
基金Item Sponsored by National Science and Technology Support Program for 12th Five-Year Plan of China(2011BAE13B02)
文摘The mechanism for heat transfer of radiation is usually adopted to heat strip in vertical continuous annealing furnace. The rate of heat transfer among strip and other objects can be hugely affected by the parameters of strip speed, geometry factors and radiating characteristic of surfaces of strip, radiating tubes and walls of furnace. A model including all parameters is proposed for calculating the heat transfer coefficient, predicting the strip tempera- ture and boundary temperature of strip through analyzing these parameters. The boundary temperature is a important datum and different from average arithmetic value of temperature of strip and temperature in furnace. Also, the model can be used to analyze the relation for temperature of strip and heat transfer coefficient, total heat transfer quantity and heating time. The model is built by using the radiating heat transfer rate, the Newtonrs law of cooling, and lumped system analysis. The results of calculation are compared to the data from production line. The comparisons indicate that the model can well predict the heating process. The model is already applied for process control in pro- duction line. Also, this research will provide a new method for analyzing the radiation heat transfer.
基金financial support of the National Natural Science Foundation of China(21776122).
文摘Due to a prolonged operation time and low mass transfer efficiency, the primary challenge in the aeration process of non-Newtonian fluids is the high energy consumption, which is closely related to the form and rate of impeller, ventilation, rheological properties and bubble morphology in the reactor. In this perspective, through optimal computational fluid dynamics models and experiments, the relationship between power consumption, volumetric mass transfer rate(kLa) and initial bubble size(d0) was constructed to establish an efficient operation mode for the aeration process of non-Newtonian fluids. It was found that reducing the d0could significantly increase the oxygen mass transfer rate, resulting in an obvious decrease in the ventilation volume and impeller speed. When d0was regulated within 2-5 mm,an optimal kLa could be achieved, and 21% of power consumption could be saved, compared to the case of bubbles with a diameter of 10 mm.
