While the nonholonomic robots with no-slipping constraints are studied extensively nowadays, the slipping effect is inevitable in many practical applications and should be considered necessarily to achieve autonomous ...While the nonholonomic robots with no-slipping constraints are studied extensively nowadays, the slipping effect is inevitable in many practical applications and should be considered necessarily to achieve autonomous navigation and control purposes especially in outdoor environments. In this paper the robust point stabilization problem of a tracked mobile robot is discussed in the presence of track slipping, which can be treated as model perturbation that violates the pure nonholonomic constraints. The kinematic model of the tracked vehicle is created, in which the slipping is assumed to be a time-varying pa- rameter under certain assumptions of track-soil interaction. By transforming the original system to the special chained form of nonholonomic system, the integrator backstepping procedure with a state-scaling technique is used to construct the controller to stabilize the system at the kinematic level. The global exponential stability of the final system can be guaranteed by Lyapunov theory. Simulation results with different initial states and slipping parameters demonstrate the fast convergence, robustness and insensitivity to the initial state of the proposed method.展开更多
A novel reconfigurable tracked robot based on four-link mechanism was proposed and released for the complicated terrain environment. This robot was modularly designed and developed, which is composed of one suspension...A novel reconfigurable tracked robot based on four-link mechanism was proposed and released for the complicated terrain environment. This robot was modularly designed and developed, which is composed of one suspension and one pair of symmetrical deployed reconfigurable track modules. This robot can implement multiple locomotion configurations by changing the track configuration, and the geometric theory analysis shows that the track length keeps constant during the process of track reconfiguration. Furthermore, a parameterized geometric model of the robot was established to analyze the kinematic performance of the robot while overcoming various obstacles. To investigate the feasibility and correctness of design theory and robot scheme, an example robot was designed to climb 45° slopes and 200 mm steps, and a group of design parameters of the robot were determined. Finally, A prototype of this robot was developed, and the test results show that the robot own powerful mobility and obstacle overcoming performance, for example, running across obstacle like mantis, extending to stride over entrenchment, standing up to elevate height, and going ahead after overturn.展开更多
The small-tracked mobile robots（ STMRs） are small,portable and concealed,and they are widely used in scouting,investigation,rescue and assistance. In this paper,a mechanical model is established based on the multi-b...The small-tracked mobile robots（ STMRs） are small,portable and concealed,and they are widely used in scouting,investigation,rescue and assistance. In this paper,a mechanical model is established based on the multi-body dynamic software RecurD yn,and a control system is simulated through Simulink,including its kinematics model,speed controller,motors＇ model. Associating the mechanical and control model,the cosimulation model is established for STMRs. The co-simulation approach is applied to optimize the motor parameters. A series of experiments are conducted to examine the accuracy of the virtual prototype,and the results demonstrate that the STMR virtual prototype can exactly illustrate the dynamic performance of the physical one.The co-simulation of mechanical model and control model is applied in forecasting and debugging critical parameters,also it provides guidance in defining motor＇s peak current.展开更多
A new parameter identification method is proposed to solve the slippage problem when tracked mobile robots execute turning motions.Such motion is divided into two states in this paper:pivot turning and coupled turning...A new parameter identification method is proposed to solve the slippage problem when tracked mobile robots execute turning motions.Such motion is divided into two states in this paper:pivot turning and coupled turning between angular velocity and linear velocity.In the processing of pivot turning,the slippage parameters could be obtained by measuring the end point in a square path.In the process of coupled turning,the slippage parameters could be calculated by measuring the perimeter of a circular path and the linear distance between the start and end points.The identification results showed that slippage parameters were affected by velocity.Therefore,a fuzzy rule base was established with the basis on the identification data,and a fuzzy controller was applied to motion control and dead reckoning.This method effectively compensated for errors resulting in unequal tension between the left and right tracks,structural dimensions and slippage.The results demonstrated that the accuracy of robot positioning and control could be substantially improved on a rigid floor.展开更多
The problem of trajectory tracking for a class of differentially driven wheeled mobile robots(WMRs)under partial loss of the effectiveness of the actuated wheels is investigated in this paper.Such actuator faults may ...The problem of trajectory tracking for a class of differentially driven wheeled mobile robots(WMRs)under partial loss of the effectiveness of the actuated wheels is investigated in this paper.Such actuator faults may cause the loss of strong controllability of the WMR,such that the conventional fault-tolerant control strategies unworkable.In this paper,a new mixed-gain adaption scheme is devised,which is adopted to adapt the gain of a decoupling prescribed performance controller to adaptively compensate for the loss of the effectiveness of the actuators.Different from the existing gain adaption technique which depends on both the barrier functions and their partial derivatives,ours involves only the barrier functions.This yields a lower magnitude of the resulting control signals.Our controller accomplishes trajectory tracking of the WMR with the prescribed rate and accuracy even in the faulty case,and the control design relies on neither the information of the WMR dynamics and the actuator faults nor the tools for function approximation,parameter identification,and fault detection or estimation.The comparative simulation results justify the theoretical findings.展开更多
In order to improve a mobile robot＇s autonomy in unknown environments, a novel intelligent controller is designed. The proposed controller is based on fuzzy logic with the aim of assisting a multi-sensor equipped mob...In order to improve a mobile robot＇s autonomy in unknown environments, a novel intelligent controller is designed. The proposed controller is based on fuzzy logic with the aim of assisting a multi-sensor equipped mobile robot to safely navigate in an indoor environment. First, the designs of two behaviors for a robot＇s autonomous navigation are described, including path tracking and obstacle avoidance, which emulate human driving behaviors and reduce the complexity of the robot＇s navigation problems in unknown environments. Secondly, the two behaviors are combined by using a finite state machine （FSM）, which ensures that the robot can safely track a predefined path in an unknown indoor environment. The inputs to this controller are the readings from the sensors. The corresponding output is the desired direction of the robot. Finally, both the simulation and experimental results verify the effectiveness of the proposed method.展开更多
As one of the core issues of the mobile robot motion control, trajectory tracking has received extensive attention. At present, the solution of the problem only takes kinematic or dynamic model into account separately...As one of the core issues of the mobile robot motion control, trajectory tracking has received extensive attention. At present, the solution of the problem only takes kinematic or dynamic model into account separately, so that the presented strategy is difficult to realize satisfactory tracking quality in practical application. Considering the unknown parameters of two models, this paper presents an adaptive controller for solving the trajectory tracking problem of a mobile robot. Firstly, an adaptive kinematic controller utilized to generate the command of velocity is designed based on Backstepping method. Then, in order to make the real velocity of mobile robot reach the desired velocity asymptotically, a dynamic adaptive controller is proposed adopting reference model and Lyapunov stability theory. Finally, through simulating typical trajectories including circular trajectory, fold line and parabola trajectory in normal and perturbed cases, the results illustrate that the control scheme can solve the tracking problem effectively. The proposed control law, which can tune the kinematic and dynamic model parameters online and overcome external disturbances, provides a novel method for improving trajectory tracking performance of the mobile robot.展开更多
In this paper,a robust tracking control scheme based on nonlinear disturbance observer is developed for the self-balancing mobile robot with external unknown disturbances.A desired velocity control law is firstly desi...In this paper,a robust tracking control scheme based on nonlinear disturbance observer is developed for the self-balancing mobile robot with external unknown disturbances.A desired velocity control law is firstly designed using the Lyapunov analysis method and the arctan function.To improve the tracking control performance,a nonlinear disturbance observer is developed to estimate the unknown disturbance of the self-balancing mobile robot.Using the output of the designed disturbance observer,the robust tracking control scheme is presented employing the sliding mode method for the selfbalancing mobile robot.Numerical simulation results further demonstrate the effectiveness of the proposed robust tracking control scheme for the self-balancing mobile robot subject to external unknown disturbances.展开更多
Spherical mobile robot has compact structure, remarkable stability, and flexible motion,which make it have many advantages over traditional mobile robots when applied in those unmanned environments, such as outer plan...Spherical mobile robot has compact structure, remarkable stability, and flexible motion,which make it have many advantages over traditional mobile robots when applied in those unmanned environments, such as outer planets. However, spherical mobile robot is a special highly under-actuated nonholonomic system, which cannot be transformed to the classic chained form. At present, there has not been a kinematics-based trajectory tracking controller which could track both the position states and the attitude states of a spherical mobile robot. In this paper, the four-state(two position states and two attitude states) trajectory tracking control of a type of spherical mobile robot driven by a 2-DOF pendulum was studied. A controller based on the shunting model of neurodynamics and the kinematic model was deduced, and its stability was demonstrated with Lyapunov’s direct method. The control priorities of the four states were allocated according to the magnification of each state tracking error in order to firstly ensure the correct tracking of the position states. The outputs(motor speeds) of the controller were regulated according to the maximum speeds and the maximum accelerations of the actuation motors in order to solve the speed jump problem caused by initial state errors, and continuous and bounded outputs were obtained. The effectiveness including the anti-interference ability of the proposed trajectory tracking controller was verified through MATLAB simulations.展开更多
A new seam-tracking method based on dynamic trajectory planning for a mobile welding robot is proposed in order to improve the response lag of the mobile robot and the high frequency oscillation in seam-tracking.By us...A new seam-tracking method based on dynamic trajectory planning for a mobile welding robot is proposed in order to improve the response lag of the mobile robot and the high frequency oscillation in seam-tracking.By using a front-placed laser-based vision sensor to dynamically extract the location of the weld seam in front of torch,the trend and direction of the weld line is roughly obtained.The robot system autonomously and dynamically performs trajectory planning based on the isometric approximation model.Arc sensor technology is applied to detect the offset during welding process in real time.The dynamic compensation of the weld path is done in combination with the control of the mobile robot and the executive body installed on it.Simulated and experimental results demonstrate that the method effectively increases the stability of welding speed and smoothness of the weld track,and hence the weld formation in curves and corners is improved.展开更多
To solve the seam tracking problem of mobile welding robot,a new controller based on the dynamics of mobile welding robot was designed using the method of backstepping kinematics into dynamics.A self-turning fuzzy con...To solve the seam tracking problem of mobile welding robot,a new controller based on the dynamics of mobile welding robot was designed using the method of backstepping kinematics into dynamics.A self-turning fuzzy controller and a fuzzy-Gaussian neural network(FGNN) controller were designed to complete coordinately controlling of cross-slider and wheels.The fuzzy-neural control algorithm was described by applying the Gaussian function and back propagation(BP) learning rule was used to tune the membership function in real time by applying the FGNN controller.To make the tracking more quickly and smoothly,the neural network controller based on dynamic model was designed,which utilized self-learning and self-adaptive ability of the neural network to deal with the partial uncertainty and the disturbances of the parameters of the robot dynamic model and real-time compensate the dynamics coupling.The results show that the selected control input torques make the system globally and asymptotically stable based on the Lyapunov function selected out;the accuracy of the proposed controller tracing is within ±0.4 mm and can satisfy the requirements of practical welding project.展开更多
Odometry using incremental wheel encoder odometry suffers from the accumulation of kinematic sensors provides the relative robot pose estimation. However, the modeling errors of wheels as the robot＇s travel distance ...Odometry using incremental wheel encoder odometry suffers from the accumulation of kinematic sensors provides the relative robot pose estimation. However, the modeling errors of wheels as the robot＇s travel distance increases. Therefore, the systematic errors need to be calibrated. The University of Michigan Benchmark（UMBmark） method is a widely used calibration scheme of the systematic errors in two wheel differential mobile robots. In this paper, the accurate parameter estimation of systematic errors is proposed by extending the conventional method. The contributions of this paper can be summarized as two issues. The first contribution is to present new calibration equations that reduce the systematic odometry errors. The new equations were derived to overcome the limitation of conventional schemes. The second contribu tion is to propose the design guideline of the test track for calibration experiments. The calibration performance can be im proved by appropriate design of the test track. The simulations and experimental results show that the accurate parameter es timation can be implemented by the proposed method.展开更多
Based on the Newton-Euler method, the dynamic behaviors of the left and right driving wheels and the robot body for the welding mobile robot were derived. In order to realize the combination control of body turning an...Based on the Newton-Euler method, the dynamic behaviors of the left and right driving wheels and the robot body for the welding mobile robot were derived. In order to realize the combination control of body turning and slider adjustment, the dynamic behaviors of sliders were also investigated. As a result, a systematic and complete dynamic model for the welding mobile robot was constructed. In order to verify the effectiveness of the above model, a sliding mode tracking control method was proposed and simulated, the lateral error stabilizes between -0.2 mm and ＋0.2 mm, and the total distance of travel for the slider is consistently within 4-2 ram. The simulation results verify the effectiveness of the established dynamic model and also show that the seam tracking controller based on the dynamic model has excellent performance in terms of stability and robustness. Furthermore, the model is found to be very suitable for practical applications of the welding mobile robot.展开更多
The trajectory tracking control performance of nonholonomic wheeled mobile robots(NWMRs)is subject to nonholonomic constraints,system uncertainties,and external disturbances.This paper proposes a barrier function-base...The trajectory tracking control performance of nonholonomic wheeled mobile robots(NWMRs)is subject to nonholonomic constraints,system uncertainties,and external disturbances.This paper proposes a barrier function-based adaptive sliding mode control(BFASMC)method to provide high-precision,fast-response performance and robustness for NWMRs.Compared with the conventional adaptive sliding mode control,the proposed control strategy can guarantee that the sliding mode variables converge to a predefined neighborhood of origin with a predefined reaching time independent of the prior knowledge of the uncertainties and disturbances bounds.Another advantage of the proposed algorithm is that the control gains can be adaptively adjusted to follow the disturbances amplitudes thanks to the barrier function.The benefit is that the overestimation of control gain can be eliminated,resulting in chattering reduction.Moreover,a modified barrier function-like control gain is employed to prevent the input saturation problem due to the physical limit of the actuator.The stability analysis and comparative experiments demonstrate that the proposed BFASMC can ensure the prespecified convergence performance of the NWMR system output variables and strong robustness against uncertainties/disturbances.展开更多
This paper presents a two-wheeled differential spherical mobile robot in view of the problems that the motion of spherical robot is difficult to control and the sensor is limited by the spherical shell.The robot is si...This paper presents a two-wheeled differential spherical mobile robot in view of the problems that the motion of spherical robot is difficult to control and the sensor is limited by the spherical shell.The robot is simple in structure,flexible in motion and easy to control.The kinematics and dynamics model of spherical mobile robot is established according to the structure of spherical mobile robot.On the basis of the adaptive neural sliding mode control,the trajectory tracking controller of the system is designed.During the simulation of the s-trajectory and circular trajectory tracking control of the spherical mobile robot,it is concluded that the spherical mobile robot is flexible in motion and easy to control.In addition,the simulation results show that the adaptive neural sliding mode control can effectively track the trajectory of the spherical robot.The adaptive control eliminates the influence of unknown parameters and disturbances,and avoids the jitter of left and right wheels during the torque output.展开更多
A mobile robot is one of the well-known nonholonomic systems. In this paper, a new adaptive tracking controller for the kinematic model of a nonholonomic mobile robot with unknown parameters is proposed. Stability of ...A mobile robot is one of the well-known nonholonomic systems. In this paper, a new adaptive tracking controller for the kinematic model of a nonholonomic mobile robot with unknown parameters is proposed. Stability of the rule is proved through the use of a Liapunov function. The artificial electrostatic field cooperates with error posture in steering in the controller. At last, this method is implemented on the simulations and the wheeled mobile robot. Results show the effectiveness of the controllers.展开更多
A control strategy for real-time target tracking for wheeled mobile robots is presented.Using a modified Kalman filter for environment perception,a novel tracking control law derived from Lyapunov stability theory is ...A control strategy for real-time target tracking for wheeled mobile robots is presented.Using a modified Kalman filter for environment perception,a novel tracking control law derived from Lyapunov stability theory is introduced.Tuning of linear velocity and angular velocity with mechanical constraints is applied.The proposed control system can simultaneously solve the target trajectory prediction,real-time tracking,and posture regulation problems of a wheeled mobile robot.Experimental results illustrate the effectiveness of the proposed tracking control laws.展开更多
The development of welding robots suitable for specially unstructured working enviroments has been become an important development direction of industrial robot application because large-scale welding structures have ...The development of welding robots suitable for specially unstructured working enviroments has been become an important development direction of industrial robot application because large-scale welding structures have been used more and more widely in modern industry. In this paper, an intelligent mobile robot for welding of ship deck with the function of autosearching weld line was presented. A wheeled motion mechanism and a cross adjustment slider are used for the welding robot body. A sensing system based on laser-PSD （position sensitive detector） displacement sensor was developed to obtain two dimensional deviation signals during seam tracking. A full-digital control system based on DSP and CPLD has also been realized to implement complex and high-performance control algorithms. Furthermore, the system has still the function of auto-searching weld line according to the characteristics information of weld groove and adjusting posture itself to the desired status preparing for welding. The experiment of auto-searching welding line shows that the robot has high tracing accuracy, and can satisfy the requirement of practical welding project.展开更多
This paper proposes a novel fixed-time sliding mode control approach for trajectory-tracking tasks of a mecanum-wheeled omnidirectional mobile robot.First,the idea of two-phase attractors is introduced into the domain...This paper proposes a novel fixed-time sliding mode control approach for trajectory-tracking tasks of a mecanum-wheeled omnidirectional mobile robot.First,the idea of two-phase attractors is introduced into the domain of sliding mode control,and a new fixed-time sliding surface is proposed.Then,according to this sliding surface,a new type of nonsingular fast terminal sliding mode control algorithm is designed for the omnidirectional mobile robot,which can realize a fast fixed-time convergence property.The stability of the control system is proven scrupulously,and a guideline for control-parameter tuning is expounded.Finally,experiments are implemented to test the trajectory-tracking performance of the robot.Experimental results demonstrate the superiority of the proposed sliding surface and the corresponding control scheme in comparison with benchmark controllers.展开更多
基金Acknowledgments This work is supported by the National Natural Science Foundation of China （Grant No. 61005092）.
文摘While the nonholonomic robots with no-slipping constraints are studied extensively nowadays, the slipping effect is inevitable in many practical applications and should be considered necessarily to achieve autonomous navigation and control purposes especially in outdoor environments. In this paper the robust point stabilization problem of a tracked mobile robot is discussed in the presence of track slipping, which can be treated as model perturbation that violates the pure nonholonomic constraints. The kinematic model of the tracked vehicle is created, in which the slipping is assumed to be a time-varying pa- rameter under certain assumptions of track-soil interaction. By transforming the original system to the special chained form of nonholonomic system, the integrator backstepping procedure with a state-scaling technique is used to construct the controller to stabilize the system at the kinematic level. The global exponential stability of the final system can be guaranteed by Lyapunov theory. Simulation results with different initial states and slipping parameters demonstrate the fast convergence, robustness and insensitivity to the initial state of the proposed method.
基金Project(2007AA04Z256) supported by the National High Technology Research and Development Program of China
文摘A novel reconfigurable tracked robot based on four-link mechanism was proposed and released for the complicated terrain environment. This robot was modularly designed and developed, which is composed of one suspension and one pair of symmetrical deployed reconfigurable track modules. This robot can implement multiple locomotion configurations by changing the track configuration, and the geometric theory analysis shows that the track length keeps constant during the process of track reconfiguration. Furthermore, a parameterized geometric model of the robot was established to analyze the kinematic performance of the robot while overcoming various obstacles. To investigate the feasibility and correctness of design theory and robot scheme, an example robot was designed to climb 45° slopes and 200 mm steps, and a group of design parameters of the robot were determined. Finally, A prototype of this robot was developed, and the test results show that the robot own powerful mobility and obstacle overcoming performance, for example, running across obstacle like mantis, extending to stride over entrenchment, standing up to elevate height, and going ahead after overturn.
基金Supported by Basic Research Foundation of Beijing Institute of Technology(20130242015)
文摘The small-tracked mobile robots（ STMRs） are small,portable and concealed,and they are widely used in scouting,investigation,rescue and assistance. In this paper,a mechanical model is established based on the multi-body dynamic software RecurD yn,and a control system is simulated through Simulink,including its kinematics model,speed controller,motors＇ model. Associating the mechanical and control model,the cosimulation model is established for STMRs. The co-simulation approach is applied to optimize the motor parameters. A series of experiments are conducted to examine the accuracy of the virtual prototype,and the results demonstrate that the STMR virtual prototype can exactly illustrate the dynamic performance of the physical one.The co-simulation of mechanical model and control model is applied in forecasting and debugging critical parameters,also it provides guidance in defining motor＇s peak current.
文摘A new parameter identification method is proposed to solve the slippage problem when tracked mobile robots execute turning motions.Such motion is divided into two states in this paper:pivot turning and coupled turning between angular velocity and linear velocity.In the processing of pivot turning,the slippage parameters could be obtained by measuring the end point in a square path.In the process of coupled turning,the slippage parameters could be calculated by measuring the perimeter of a circular path and the linear distance between the start and end points.The identification results showed that slippage parameters were affected by velocity.Therefore,a fuzzy rule base was established with the basis on the identification data,and a fuzzy controller was applied to motion control and dead reckoning.This method effectively compensated for errors resulting in unequal tension between the left and right tracks,structural dimensions and slippage.The results demonstrated that the accuracy of robot positioning and control could be substantially improved on a rigid floor.
基金supported in part by the National Natural Science Foundation of China under Grants 61991404,62103093 and 62473089the Research Program of the Liaoning Liaohe Laboratory,China under Grant LLL23ZZ-05-01+5 种基金the Key Research and Development Program of Liaoning Province of China under Grant 2023JH26/10200011the 111 Project 2.0 of China under Grant B08015,the National Key Research and Development Program of China under Grant 2022YFB3305905the Xingliao Talent Program of Liaoning Province of China under Grant XLYC2203130the Natural Science Foundation of Liaoning Province of China under Grants 2024JH3/10200012 and 2023-MS-087the Open Research Project of the State Key Laboratory of Industrial Control Technology of China under Grant ICT2024B12the Fundamental Research Funds for the Central Universities of China under Grants N2108003 and N2424004.
文摘The problem of trajectory tracking for a class of differentially driven wheeled mobile robots(WMRs)under partial loss of the effectiveness of the actuated wheels is investigated in this paper.Such actuator faults may cause the loss of strong controllability of the WMR,such that the conventional fault-tolerant control strategies unworkable.In this paper,a new mixed-gain adaption scheme is devised,which is adopted to adapt the gain of a decoupling prescribed performance controller to adaptively compensate for the loss of the effectiveness of the actuators.Different from the existing gain adaption technique which depends on both the barrier functions and their partial derivatives,ours involves only the barrier functions.This yields a lower magnitude of the resulting control signals.Our controller accomplishes trajectory tracking of the WMR with the prescribed rate and accuracy even in the faulty case,and the control design relies on neither the information of the WMR dynamics and the actuator faults nor the tools for function approximation,parameter identification,and fault detection or estimation.The comparative simulation results justify the theoretical findings.
基金Cultivation Fund for Innovation Project of Ministry of Education (No.708045)
文摘In order to improve a mobile robot＇s autonomy in unknown environments, a novel intelligent controller is designed. The proposed controller is based on fuzzy logic with the aim of assisting a multi-sensor equipped mobile robot to safely navigate in an indoor environment. First, the designs of two behaviors for a robot＇s autonomous navigation are described, including path tracking and obstacle avoidance, which emulate human driving behaviors and reduce the complexity of the robot＇s navigation problems in unknown environments. Secondly, the two behaviors are combined by using a finite state machine （FSM）, which ensures that the robot can safely track a predefined path in an unknown indoor environment. The inputs to this controller are the readings from the sensors. The corresponding output is the desired direction of the robot. Finally, both the simulation and experimental results verify the effectiveness of the proposed method.
基金supported by State Key Laboratory of Robotics and System of China (Grant No. SKLR-2010 -MS - 14)State Key Lab of Embedded System and Service Computing of China(Grant No. 2010-11)
文摘As one of the core issues of the mobile robot motion control, trajectory tracking has received extensive attention. At present, the solution of the problem only takes kinematic or dynamic model into account separately, so that the presented strategy is difficult to realize satisfactory tracking quality in practical application. Considering the unknown parameters of two models, this paper presents an adaptive controller for solving the trajectory tracking problem of a mobile robot. Firstly, an adaptive kinematic controller utilized to generate the command of velocity is designed based on Backstepping method. Then, in order to make the real velocity of mobile robot reach the desired velocity asymptotically, a dynamic adaptive controller is proposed adopting reference model and Lyapunov stability theory. Finally, through simulating typical trajectories including circular trajectory, fold line and parabola trajectory in normal and perturbed cases, the results illustrate that the control scheme can solve the tracking problem effectively. The proposed control law, which can tune the kinematic and dynamic model parameters online and overcome external disturbances, provides a novel method for improving trajectory tracking performance of the mobile robot.
基金supported by the National Natural Science Foundation of China(61573184)the Specialized Research Fund for the Doctoral Program of Higher Education(20133218110013)+1 种基金the Six Talents Peak Project of Jainism Province(2012-XRAY-010)the Fundamental Research Funds for theCentral Universities(NE2016101)
文摘In this paper,a robust tracking control scheme based on nonlinear disturbance observer is developed for the self-balancing mobile robot with external unknown disturbances.A desired velocity control law is firstly designed using the Lyapunov analysis method and the arctan function.To improve the tracking control performance,a nonlinear disturbance observer is developed to estimate the unknown disturbance of the self-balancing mobile robot.Using the output of the designed disturbance observer,the robust tracking control scheme is presented employing the sliding mode method for the selfbalancing mobile robot.Numerical simulation results further demonstrate the effectiveness of the proposed robust tracking control scheme for the self-balancing mobile robot subject to external unknown disturbances.
文摘Spherical mobile robot has compact structure, remarkable stability, and flexible motion,which make it have many advantages over traditional mobile robots when applied in those unmanned environments, such as outer planets. However, spherical mobile robot is a special highly under-actuated nonholonomic system, which cannot be transformed to the classic chained form. At present, there has not been a kinematics-based trajectory tracking controller which could track both the position states and the attitude states of a spherical mobile robot. In this paper, the four-state(two position states and two attitude states) trajectory tracking control of a type of spherical mobile robot driven by a 2-DOF pendulum was studied. A controller based on the shunting model of neurodynamics and the kinematic model was deduced, and its stability was demonstrated with Lyapunov’s direct method. The control priorities of the four states were allocated according to the magnification of each state tracking error in order to firstly ensure the correct tracking of the position states. The outputs(motor speeds) of the controller were regulated according to the maximum speeds and the maximum accelerations of the actuation motors in order to solve the speed jump problem caused by initial state errors, and continuous and bounded outputs were obtained. The effectiveness including the anti-interference ability of the proposed trajectory tracking controller was verified through MATLAB simulations.
基金supported by the National Natural Science Foundation of China(51605251)Tsinghua University Initiative Scientific Research Program(2014Z05093).
文摘A new seam-tracking method based on dynamic trajectory planning for a mobile welding robot is proposed in order to improve the response lag of the mobile robot and the high frequency oscillation in seam-tracking.By using a front-placed laser-based vision sensor to dynamically extract the location of the weld seam in front of torch,the trend and direction of the weld line is roughly obtained.The robot system autonomously and dynamically performs trajectory planning based on the isometric approximation model.Arc sensor technology is applied to detect the offset during welding process in real time.The dynamic compensation of the weld path is done in combination with the control of the mobile robot and the executive body installed on it.Simulated and experimental results demonstrate that the method effectively increases the stability of welding speed and smoothness of the weld track,and hence the weld formation in curves and corners is improved.
基金Project(2007309) supported by the Scientific Research Project of Hebei Provincial Education Office,ChinaProject(2007AA04Z209) supported by the National High-Tech Research and Development Program of China
文摘To solve the seam tracking problem of mobile welding robot,a new controller based on the dynamics of mobile welding robot was designed using the method of backstepping kinematics into dynamics.A self-turning fuzzy controller and a fuzzy-Gaussian neural network(FGNN) controller were designed to complete coordinately controlling of cross-slider and wheels.The fuzzy-neural control algorithm was described by applying the Gaussian function and back propagation(BP) learning rule was used to tune the membership function in real time by applying the FGNN controller.To make the tracking more quickly and smoothly,the neural network controller based on dynamic model was designed,which utilized self-learning and self-adaptive ability of the neural network to deal with the partial uncertainty and the disturbances of the parameters of the robot dynamic model and real-time compensate the dynamics coupling.The results show that the selected control input torques make the system globally and asymptotically stable based on the Lyapunov function selected out;the accuracy of the proposed controller tracing is within ±0.4 mm and can satisfy the requirements of practical welding project.
基金The MKE(The Ministry of Knowledge Economy),Korea,under the ITRC(Infor mation Technology Research Center)support programsupervised by the NIPA(National ITIndustry Promotion Agency)(NIPA-2012-C1090-1221-0010)TheMKE,Korea,under the Human Resources Development Programfor Convergence Robot Specialists support programsu-pervised by the NIPA(NIPA-2012-H1502-12-1002)Basic Science Research Program through the NRF funded by the MEST(2011-0025980)and MEST(2012-0005487)
文摘Odometry using incremental wheel encoder odometry suffers from the accumulation of kinematic sensors provides the relative robot pose estimation. However, the modeling errors of wheels as the robot＇s travel distance increases. Therefore, the systematic errors need to be calibrated. The University of Michigan Benchmark（UMBmark） method is a widely used calibration scheme of the systematic errors in two wheel differential mobile robots. In this paper, the accurate parameter estimation of systematic errors is proposed by extending the conventional method. The contributions of this paper can be summarized as two issues. The first contribution is to present new calibration equations that reduce the systematic odometry errors. The new equations were derived to overcome the limitation of conventional schemes. The second contribu tion is to propose the design guideline of the test track for calibration experiments. The calibration performance can be im proved by appropriate design of the test track. The simulations and experimental results show that the accurate parameter es timation can be implemented by the proposed method.
基金Project(50605044) supported by the National Natural Science Foundation of China Project(2004DFA02400) supported by the Key International Science and Technology Cooperation Program
文摘Based on the Newton-Euler method, the dynamic behaviors of the left and right driving wheels and the robot body for the welding mobile robot were derived. In order to realize the combination control of body turning and slider adjustment, the dynamic behaviors of sliders were also investigated. As a result, a systematic and complete dynamic model for the welding mobile robot was constructed. In order to verify the effectiveness of the above model, a sliding mode tracking control method was proposed and simulated, the lateral error stabilizes between -0.2 mm and ＋0.2 mm, and the total distance of travel for the slider is consistently within 4-2 ram. The simulation results verify the effectiveness of the established dynamic model and also show that the seam tracking controller based on the dynamic model has excellent performance in terms of stability and robustness. Furthermore, the model is found to be very suitable for practical applications of the welding mobile robot.
基金the China Scholarship Council(202106690037)the Natural Science Foundation of Anhui Province(19080885QE194)。
文摘The trajectory tracking control performance of nonholonomic wheeled mobile robots(NWMRs)is subject to nonholonomic constraints,system uncertainties,and external disturbances.This paper proposes a barrier function-based adaptive sliding mode control(BFASMC)method to provide high-precision,fast-response performance and robustness for NWMRs.Compared with the conventional adaptive sliding mode control,the proposed control strategy can guarantee that the sliding mode variables converge to a predefined neighborhood of origin with a predefined reaching time independent of the prior knowledge of the uncertainties and disturbances bounds.Another advantage of the proposed algorithm is that the control gains can be adaptively adjusted to follow the disturbances amplitudes thanks to the barrier function.The benefit is that the overestimation of control gain can be eliminated,resulting in chattering reduction.Moreover,a modified barrier function-like control gain is employed to prevent the input saturation problem due to the physical limit of the actuator.The stability analysis and comparative experiments demonstrate that the proposed BFASMC can ensure the prespecified convergence performance of the NWMR system output variables and strong robustness against uncertainties/disturbances.
基金Foundation items:National Science and Technology Major Project(No.2011ZX05021-001)China Postdoctoral Science Foundation(No.2019M663865)。
文摘This paper presents a two-wheeled differential spherical mobile robot in view of the problems that the motion of spherical robot is difficult to control and the sensor is limited by the spherical shell.The robot is simple in structure,flexible in motion and easy to control.The kinematics and dynamics model of spherical mobile robot is established according to the structure of spherical mobile robot.On the basis of the adaptive neural sliding mode control,the trajectory tracking controller of the system is designed.During the simulation of the s-trajectory and circular trajectory tracking control of the spherical mobile robot,it is concluded that the spherical mobile robot is flexible in motion and easy to control.In addition,the simulation results show that the adaptive neural sliding mode control can effectively track the trajectory of the spherical robot.The adaptive control eliminates the influence of unknown parameters and disturbances,and avoids the jitter of left and right wheels during the torque output.
文摘A mobile robot is one of the well-known nonholonomic systems. In this paper, a new adaptive tracking controller for the kinematic model of a nonholonomic mobile robot with unknown parameters is proposed. Stability of the rule is proved through the use of a Liapunov function. The artificial electrostatic field cooperates with error posture in steering in the controller. At last, this method is implemented on the simulations and the wheeled mobile robot. Results show the effectiveness of the controllers.
文摘A control strategy for real-time target tracking for wheeled mobile robots is presented.Using a modified Kalman filter for environment perception,a novel tracking control law derived from Lyapunov stability theory is introduced.Tuning of linear velocity and angular velocity with mechanical constraints is applied.The proposed control system can simultaneously solve the target trajectory prediction,real-time tracking,and posture regulation problems of a wheeled mobile robot.Experimental results illustrate the effectiveness of the proposed tracking control laws.
文摘The development of welding robots suitable for specially unstructured working enviroments has been become an important development direction of industrial robot application because large-scale welding structures have been used more and more widely in modern industry. In this paper, an intelligent mobile robot for welding of ship deck with the function of autosearching weld line was presented. A wheeled motion mechanism and a cross adjustment slider are used for the welding robot body. A sensing system based on laser-PSD （position sensitive detector） displacement sensor was developed to obtain two dimensional deviation signals during seam tracking. A full-digital control system based on DSP and CPLD has also been realized to implement complex and high-performance control algorithms. Furthermore, the system has still the function of auto-searching weld line according to the characteristics information of weld groove and adjusting posture itself to the desired status preparing for welding. The experiment of auto-searching welding line shows that the robot has high tracing accuracy, and can satisfy the requirement of practical welding project.
基金supported by the National Natural Science Foundation of China(62003305)the Natural Science Foundation of Zhejiang Province(LQ21F030015)+1 种基金the Key Research and Development Program of Zhejiang Province(2022C03029)the Public Welfare Application Research Project of Huzhou City(2022GZ15).
文摘This paper proposes a novel fixed-time sliding mode control approach for trajectory-tracking tasks of a mecanum-wheeled omnidirectional mobile robot.First,the idea of two-phase attractors is introduced into the domain of sliding mode control,and a new fixed-time sliding surface is proposed.Then,according to this sliding surface,a new type of nonsingular fast terminal sliding mode control algorithm is designed for the omnidirectional mobile robot,which can realize a fast fixed-time convergence property.The stability of the control system is proven scrupulously,and a guideline for control-parameter tuning is expounded.Finally,experiments are implemented to test the trajectory-tracking performance of the robot.Experimental results demonstrate the superiority of the proposed sliding surface and the corresponding control scheme in comparison with benchmark controllers.
