Gap exists in the interface of cement asphalt emulsion mortar and CRTS I track slab universally, which is more severe at four corners than other parts of the track slab. In this work, the temperature and elevation of ...Gap exists in the interface of cement asphalt emulsion mortar and CRTS I track slab universally, which is more severe at four corners than other parts of the track slab. In this work, the temperature and elevation of CRTS I slab track with and without rail were measured continuously to study the influence mechanism of rail on the gap. The results show that the alternating temperature gradient of track slab is the main reason that causes the gap, and laying rail can efficiently decrease the gap size in the slab track without rail. Compared with the slab track without rail, the maximum elevation occurred at the corner, the maximum gapwidth and the maximum gap depth of the slab track with rail laid were decreased by 0.45 mm （25.7%）, 0.75 mm （46.6%） and 9.5 mm （59.4%）, respectively; meanwhile, the disqualification ratio at corners was reduced to 5.9%, which is 50% less than that of the track without rail. When elevation mismatch occurs in adjacent track slabs, a gasket should be placed at rail-bearing bed below the track slab in order to avoid the lower slab being dragged up by the higher slab and the further occurrence of new gap.展开更多
According to the wire and nozzle movement track in groove, the movement parameters of wire were memorized and recalled for the following top welds by using a single chip computer. In this paper, it was also discussed...According to the wire and nozzle movement track in groove, the movement parameters of wire were memorized and recalled for the following top welds by using a single chip computer. In this paper, it was also discussed that the design problems of correcting deviation of wire movement track in narrow gap submerged arc welding process must be noticed in order to obtain the sound welding result.展开更多
基金supported by the National Natural Science foundation of China (No. 51408610)
文摘Gap exists in the interface of cement asphalt emulsion mortar and CRTS I track slab universally, which is more severe at four corners than other parts of the track slab. In this work, the temperature and elevation of CRTS I slab track with and without rail were measured continuously to study the influence mechanism of rail on the gap. The results show that the alternating temperature gradient of track slab is the main reason that causes the gap, and laying rail can efficiently decrease the gap size in the slab track without rail. Compared with the slab track without rail, the maximum elevation occurred at the corner, the maximum gapwidth and the maximum gap depth of the slab track with rail laid were decreased by 0.45 mm （25.7%）, 0.75 mm （46.6%） and 9.5 mm （59.4%）, respectively; meanwhile, the disqualification ratio at corners was reduced to 5.9%, which is 50% less than that of the track without rail. When elevation mismatch occurs in adjacent track slabs, a gasket should be placed at rail-bearing bed below the track slab in order to avoid the lower slab being dragged up by the higher slab and the further occurrence of new gap.
文摘According to the wire and nozzle movement track in groove, the movement parameters of wire were memorized and recalled for the following top welds by using a single chip computer. In this paper, it was also discussed that the design problems of correcting deviation of wire movement track in narrow gap submerged arc welding process must be noticed in order to obtain the sound welding result.
