The Qi Tai Telescope(QTT),which has a 110 m aperture,is planned to be the largest scale steerable tele-scope in the world.Ideally,the telescope’s repeated pointing accuracy error should be less than 2.5 arc seconds(a...The Qi Tai Telescope(QTT),which has a 110 m aperture,is planned to be the largest scale steerable tele-scope in the world.Ideally,the telescope’s repeated pointing accuracy error should be less than 2.5 arc seconds(arcsec);thus,the telescope structure must satisfy ultra-high precision requirements.In this pur-suit,the present research envisages a reverse-design method for the track surface to reduce the difficulty of the telescope’s design and manufacture.First,the distribution characteristics of the test data for the track error were verified using the skewness coefficient and kurtosis coefficient methods.According to the distribution characteristics,the azimuth track error was simulated by a two-scale model.The error of the long period and short amplitude was characterized as large-scale and described by a trigonometric function,while the short period and high amplitude error was characterized as small-scale and simulated by a fractal function.Based on the two-scale model,effect of the error on the pointing accuracy was deduced.Subsequently,the relationship between the root mean square(RMS)of the track error and the RMS of the pointing accuracy error of the telescope was deduced.Finally,the allowable RMS value of the track error was derived from the allowable pointing accuracy errors.To validate the effectiveness of the new design method,two typical radio telescopes(the Green Bank Telescope(GBT)and the Large Millimeter Telescope(LMT))were selected as experimental examples.Through comparison,the theoretical calculated values of the pointing accuracy of the telescope were consistent with the measured values,with a maximum error of less than 10%.展开更多
The multi axis coupling attitude control of a spacecraft with thrusters for attitude tracking is investigated. The attitude kinematics and dynamics are both described by error quaternions. The four error quaternion dy...The multi axis coupling attitude control of a spacecraft with thrusters for attitude tracking is investigated. The attitude kinematics and dynamics are both described by error quaternions. The four error quaternion dynamic equations are then transformed into four perturbed double integrators via linear transformations. An on off controller is designed based on the perturbed double integrators. The controller is determined by parabolic switching functions of the scalar error quaternion and the transfor...展开更多
The sub-land/sub-pit affects the characteristic of the tracking error signal which is generated by the conventional differential phase detection （DPD） method in the signal waveform modulation multi-level （SWML） re...The sub-land/sub-pit affects the characteristic of the tracking error signal which is generated by the conventional differential phase detection （DPD） method in the signal waveform modulation multi-level （SWML） read-only disc. To solve this problem, this paper proposes a new tracking error detection method using amplitude difference. Based on the diffraction theory, the amplitude difference is proportional to the tracking error and is feasible to be used for obtaining the off-track information. The experimental system of the amplitude difference detection method is developed. The experimental results show that the tracking error signal derived from the new method has better performance in uniformity and signal-to-noise ratio than that derived from the conventional DPD method in the SWML read-only disc.展开更多
In order to solve problems in high dynamic environment, a frequency-locked loop （FLL） assisted phase-locked loop （PLL） is put forward for carrier tracking. On the basis of the analysis of discriminators, the total...In order to solve problems in high dynamic environment, a frequency-locked loop （FLL） assisted phase-locked loop （PLL） is put forward for carrier tracking. On the basis of the analysis of discriminators, the total phase error of the tracking loop is analyzed and a general error expression is derived. By using linearization and Jaffe-Rechtin coefficients, the performance of a special first order FLL-assisted second order PLL is analyzed to get a closed expression. Analysis results and simula- tions show that there exist an optimal FLL loop bandwidth and a optimal PLL loop bandwidth which can make the phase jitter much less than that when the PLL is used alone.展开更多
Laser tracking system （LTS） is an advanced device for large size 3D coordinates measuring with the advantages of broad range, high speed and high accuracy. However, its measuring accuracy is highly dominated by the ...Laser tracking system （LTS） is an advanced device for large size 3D coordinates measuring with the advantages of broad range, high speed and high accuracy. However, its measuring accuracy is highly dominated by the geometric errors of the tracking mirror mechanism. Proper calibration of LTS is essential prior to the use of it for metrology. A kinematics model that describes not only the motion but also the geometric variations of LTS is developed. Through error analysis of the proposed model, it is claimed that gimbals axis misalignments and tracking mirror center off-set are the key contributors to measuring errors of LTS. A self-calibration method is presented of calibrating LTS with planar constraints. Various calibration strategies utilizing single-plane and multiple-plane constraints are proposed for different situations. For each calibration strategy, issues about the error parameter estimation of LTS are exploded to find out in which conditions these parameters can be uniquely estimated. Moreover, these conditions reveal the applicability of the planar constraints to LTS self-calibration. Intensive studies have been made to check validity of the theoretical results. The results show that the measuring accuracy of LTS has increased by 5 times since this technique for calibration is used.展开更多
Radar leveling system is the key equipment for improving the radar mobility and survival capability. A combined quantitative feedback theory (QFT) controller is designed for the radar truck leveling simulator in this ...Radar leveling system is the key equipment for improving the radar mobility and survival capability. A combined quantitative feedback theory (QFT) controller is designed for the radar truck leveling simulator in this paper, which suffers from strong nonlinearities and system parameter uncertainties. QFT can reduce the plant uncertainties and stabilize the system, but it fails to obtain high-precision tracking. This drawback can be solved by a robust QFT control scheme based on zero phase error tracking control (ZPETC) compensation. The combined controller not only possesses high robustness, but greatly improves the system performance. To verify the effiectiveness and the potential of the proposed controller, a series of experiments have been carried out. Experimental results have demonstrated its robustness against a large range of parameters variation and high tracking precision performance, as well as its capability of restraining the load coupling among channels. The combined QFT controller can drive the radar truck leveling platform accurately, quickly and stably.展开更多
In this paper,the fixed-time time-varying formation of heterogeneous multi-agent systems(MASs) based on tracking error observer under denial-of-service(DoS) attacks is investigated.Firstly,the dynamic pinning strategy...In this paper,the fixed-time time-varying formation of heterogeneous multi-agent systems(MASs) based on tracking error observer under denial-of-service(DoS) attacks is investigated.Firstly,the dynamic pinning strategy is used to reconstruct the communication channel for the system that suffers from DoS attacks to prevent the discontinuous transmission information of the communication network from affecting MASs formation.Then,considering that the leader state is not available to each follower under DoS attacks,a fixed-time distributed observer without velocity information is constructed to estimate the tracking error between followers and the leader.Finally,adaptive radial basis function neural network(RBFNN) is used to approximate the unknown ensemble disturbances in the system,and the fixed-time time-varying formation scheme is designed with the constructed observer.The effectiveness of the proposed control algorithm is demonstrated by the numerical simulation.展开更多
The aim of this study was to predict drivers＇ drowsy states with high risk of encountering a crash and prevent drivers from continuing to drive under such drowsy states with high risk of crash. While the participants...The aim of this study was to predict drivers＇ drowsy states with high risk of encountering a crash and prevent drivers from continuing to drive under such drowsy states with high risk of crash. While the participants were required to carry out a simulated driving task, EEG （Electro encephalography） （EEG-MPF and EEG-α/β）, ECG （Electrocradiogram） （RRV3）, t racking error, an d subjective rating on drowsiness were measured. On the basis of such measurements, an attempt was made to predict the point in time with high crash risk using Bayesian estimation of posterior probability of drowsiness, tracking error, and subjective drowsiness. As a result of applying the proposed method to the data of each participant, it was verified that the proposed method could predict the point in time with high crash risk before the point in time of crash.展开更多
This work focuses on a brief discussion of new concepts of using smartphone sensors for 3D painting in virtual or augmented reality. Motivation of this research comes from the idea of using different types of sensors ...This work focuses on a brief discussion of new concepts of using smartphone sensors for 3D painting in virtual or augmented reality. Motivation of this research comes from the idea of using different types of sensors which exist in our smartphones such as accelerometer, gyroscope, magnetometer etc. to track the position for painting in virtual reality, like Google Tilt Brush, but cost effectively. Research studies till date on estimating position and localization and tracking have been thoroughly reviewed to find the appropriate algorithm which will provide accurate result with minimum drift error. Sensor fusion, Inertial Measurement Unit (IMU), MEMS inertial sensor, Kalman filter based global translational localization systems are studied. It is observed, prevailing approaches consist issues such as stability, random bias drift, noisy acceleration output, position estimation error, robustness or accuracy, cost effectiveness etc. Moreover, issues with motions that do not follow laws of physics, bandwidth, restrictive nature of assumptions, scale optimization for large space are noticed as well. Advantages of such smartphone sensor based position estimation approaches include, less memory demand, very fast operation, making them well suited for real time problems and embedded systems. Being independent of the size of the system, they can work effectively for high dimensional systems as well. Through study of these approaches it is observed, extended Kalman filter gives the highest accuracy with reduced requirement of excess hardware during tracking. It renders better and faster result when used in accelerometer sensor. With the aid of various software, error accuracy can be increased further as well.展开更多
The presence of systematic measuring errors complicates track-to-track association, spatially separates the tracks that correspond to the same true target, and seriously decline the performances of traditional track-t...The presence of systematic measuring errors complicates track-to-track association, spatially separates the tracks that correspond to the same true target, and seriously decline the performances of traditional track-to-track association algorithms. Consequently, the influence of radar systematic errors on tracks from different radars, which is described as some rotation and translation, has been analyzed theoretically in this paper. In addition, a novel approach named alignment-correlation method is developed to estimate and reduce this effect, align and correlate tracks accurately without prior registration using phase correlation technique and statistic binary track correlation algorithm. Monte-Carlo simulation results illustrate that the proposed algorithm has good performance in solving the track-to-track association problem with systematic errors in radar network and could provide effective and reliable associated tracks for the next step of registration.展开更多
Contour error is the deviation between the actual displacement and reference trajectory,which is directly related to the machining accuracy.Contour error compensation poses substantial challenges because of the time-v...Contour error is the deviation between the actual displacement and reference trajectory,which is directly related to the machining accuracy.Contour error compensation poses substantial challenges because of the time-varying,nonlinear,and strongly coupled characteristics of parallel machining modules.In addition,the time delay in the system reduces the timeliness of the feedback data,thereby making online contour error calculations and compensation particularly difficult.To solve this problem,the generation mechanism of the time delay of the feedback data and contour error is revealed,and a systematic method for the identification of the time-delay parameter based on Beckhoff’s tracking error calculation mechanism is proposed.The temporal alignment between the position commands and feedback data enables the online calculation of the contour error.On this basis,the tracking error of the drive axes(an important factor resulting in end-effector contour errors)is used for the contour error calculation.Considering the ambiguous parameter-setting logic of the servo drive,the servo parameter is calculated in reverse using the steady-state error to obtain the tracking error model of the drive axes.Furthermore,combined with the system time-delay model,an online correction method for the tracking error estimation model is established.To achieve an accurate mapping of the drive-axis tracking error and end-effector contour error,a bounded iterative search method for the nearest contour point and online calculation model for the contour error are respectively established.Finally,an online compensation controller for contour error is designed.Its effectiveness is verified by a machining experiment on a frame workpiece.The machining results show that the contour error reduces from 68μm to 45μm,and the finish machining accuracy increases by 34%.This study provides a feasible method for online compensation of contour error in a system with time delay.展开更多
In this paper, an optimal tracking control scheme is proposed for a class of discrete-time chaotic systems using the approximation-error-based adaptive dynamic programming （ADP） algorithm. Via the system transformat...In this paper, an optimal tracking control scheme is proposed for a class of discrete-time chaotic systems using the approximation-error-based adaptive dynamic programming （ADP） algorithm. Via the system transformation, the optimal tracking problem is transformed into an optimal regulation problem, and then the novel optimal tracking control method is proposed. It is shown that for the iterative ADP algorithm with finite approximation error, the iterative performance index functions can converge to a finite neighborhood of the greatest lower bound of all performance index functions under some convergence conditions. Two examples are given to demonstrate the validity of the proposed optimal tracking control scheme for chaotic systems.展开更多
Vehicle tracking plays a crucial role in intelligent transportation, autonomous driving, and video surveillance. However, challenges such as occlusion, multi-target interference, and nonlinear motion in dynamic scenar...Vehicle tracking plays a crucial role in intelligent transportation, autonomous driving, and video surveillance. However, challenges such as occlusion, multi-target interference, and nonlinear motion in dynamic scenarios make tracking accuracy and stability a focus of ongoing research. This paper proposes an integrated method combining YOLOv8 object detection with adaptive Kalman filtering. The approach employs a support vector machine (SVM) to dynamically select the optimal filter (including standard Kalman filter, extended Kalman filter, and unscented Kalman filter), enhancing the system’s adaptability to different motion patterns. Additionally, an error feedback mechanism is incorporated to dynamically adjust filter parameters, further improving responsiveness to sudden events. Experimental results on the KITTI and UA-DETRAC datasets demonstrate that the proposed method significantly improves detection accuracy (mAP@0.5 increased by approximately 3%), tracking accuracy (MOTA improved by 5%), and system robustness, providing an efficient solution for vehicle tracking in complex environments.展开更多
平均光强分布是自由空间激光通信(Free Space Optical Communication,FSOC)性能分析中的一个重要参数,非零均值不等方差的跟踪误差场景下平均光强分布理论的封闭表达式尚未得出。采用统计平均的方法对非零均值不等方差跟踪误差下的平均...平均光强分布是自由空间激光通信(Free Space Optical Communication,FSOC)性能分析中的一个重要参数,非零均值不等方差的跟踪误差场景下平均光强分布理论的封闭表达式尚未得出。采用统计平均的方法对非零均值不等方差跟踪误差下的平均光强分布进行建模并推导出其理论的封闭表达式,通过蒙特卡洛模拟对所推导的结果进行验证。在非零均值不等方差跟踪误差的影响下,高斯光束的平均光强分布廓线的形状和中心位置均发生变化。此外,采用相同面积的方形接收孔径代替圆形接收孔径,推导出非零均值不等方差跟踪误差下的平均接收功率。该工作能为非零均值不等方差跟踪误差下的自由空间激光通信系统性能分析和链路设计提供理论指导。展开更多
针对无人机跟踪过程中目标遮挡和目标背景变化等因素导致的跟踪失败现象,提出一种M TF(M ean-shift by TWH and FB-error)跟踪算法。首先,在M ean-shift跟踪框架下引入目标加权直方图(TWH:Target-Weighted Histogram)描述目标,即在跟踪...针对无人机跟踪过程中目标遮挡和目标背景变化等因素导致的跟踪失败现象,提出一种M TF(M ean-shift by TWH and FB-error)跟踪算法。首先,在M ean-shift跟踪框架下引入目标加权直方图(TWH:Target-Weighted Histogram)描述目标,即在跟踪过程中,用目标的局部背景来削弱所有区域的内部背景特征,使目标特征突出;其次,添加FB-error约束,在目标被部分遮挡时,通过使用FB-error相关加权函数把目标当前位置的预测结果与Mean-shift矢量计算出的位置结果联合起来估计目标在t时刻的最终位置。实验表明,此跟踪算法在跟踪精度上有较大突破。展开更多
This paper investigates the possible sources of errors associated with tropical cyclone （TC） tracks forecasted using the Global/Regional Assimilation and Prediction System （GRAPES）. The GRAPES forecasts were made ...This paper investigates the possible sources of errors associated with tropical cyclone （TC） tracks forecasted using the Global/Regional Assimilation and Prediction System （GRAPES）. The GRAPES forecasts were made for 16 landfaIling TCs in the western North Pacific basin during the 2008 and 2009 seasons, with a forecast length of 72 hours, and using the default initial conditions （＂initials＂, hereafter）, which are from the NCEP-FNL dataset, as well as ECMWF initials. The forecasts are compared with ECMWF forecasts. The results show that in most TCs, the GRAPES forecasts are improved when using the ECMWF initials compared with the default initials. Compared with the ECMWF initials, the default initials produce lower intensity TCs and a lower intensity subtropical high, but a higher intensity South Asia high and monsoon trough, as well as a higher temperature but lower specific humidity at the TC center. Replacement of the geopotential height and wind fields with the ECMWF initials in and around the TC center at the initial time was found to be the most efficient way to improve the forecasts. In addition, TCs that showed the greatest improvement in forecast accuracy usually had the largest initial uncertainties in TC intensity and were usually in the intensifying phase. The results demonstrate the importance of the initial intensity for TC track forecasts made using GRAPES, and indicate the model is better in describing the intensifying phase than the decaying phase of TCs. Finally, the limit of the improvement indicates that the model error associated with GRAPES forecasts may be the main cause of poor forecasts of landfalling TCs. Thus, further examinations of the model errors are required.展开更多
The code tracking loop is a key component for user positioning. The pseudorange information of Bei Dou B1 signals has been fused and changed for vector tracking, so a correlation output model for complex scenarios is ...The code tracking loop is a key component for user positioning. The pseudorange information of Bei Dou B1 signals has been fused and changed for vector tracking, so a correlation output model for complex scenarios is designed to prevent the propagation of error and valuate the signal performance. The relevant software and hardware factors that affect the output are analyzed.A single channel time-division multiplexing(TDM) method for multicorrelation data extraction is proposed. Statistical characteristics of the correlation output data for both vector and scalar structures are evaluated. Simulation results show that correlation outputs for both structures follow normal or Chi-squared distributions in normal conditions, and the Gamma distribution in harsh conditions. It is shown that a tracking model based on the multi-channel fusion hardly changes the probability distribution of the correlation output in the normal case, but it reduces the ranging error of the code loop, and hence the tracking ability of the code loop for weak signals is improved. Furthermore, vector tracking changes the pseudorange characteristics of channels anytime, and affects the mutual correlation outputs of the code loops in the abnormal case. This study provides a basis for the subsequent design of autonomous integrity algorithms for vector tracking.展开更多
基金financial support from the National Natural Science Foundation of China (51775402 and U1931139)
文摘The Qi Tai Telescope(QTT),which has a 110 m aperture,is planned to be the largest scale steerable tele-scope in the world.Ideally,the telescope’s repeated pointing accuracy error should be less than 2.5 arc seconds(arcsec);thus,the telescope structure must satisfy ultra-high precision requirements.In this pur-suit,the present research envisages a reverse-design method for the track surface to reduce the difficulty of the telescope’s design and manufacture.First,the distribution characteristics of the test data for the track error were verified using the skewness coefficient and kurtosis coefficient methods.According to the distribution characteristics,the azimuth track error was simulated by a two-scale model.The error of the long period and short amplitude was characterized as large-scale and described by a trigonometric function,while the short period and high amplitude error was characterized as small-scale and simulated by a fractal function.Based on the two-scale model,effect of the error on the pointing accuracy was deduced.Subsequently,the relationship between the root mean square(RMS)of the track error and the RMS of the pointing accuracy error of the telescope was deduced.Finally,the allowable RMS value of the track error was derived from the allowable pointing accuracy errors.To validate the effectiveness of the new design method,two typical radio telescopes(the Green Bank Telescope(GBT)and the Large Millimeter Telescope(LMT))were selected as experimental examples.Through comparison,the theoretical calculated values of the pointing accuracy of the telescope were consistent with the measured values,with a maximum error of less than 10%.
基金National Natural Science F oundation of China(No.10 172 0 12 )
文摘The multi axis coupling attitude control of a spacecraft with thrusters for attitude tracking is investigated. The attitude kinematics and dynamics are both described by error quaternions. The four error quaternion dynamic equations are then transformed into four perturbed double integrators via linear transformations. An on off controller is designed based on the perturbed double integrators. The controller is determined by parabolic switching functions of the scalar error quaternion and the transfor...
基金Supported by National Basic Research Program of China （973 Program） （2010CB731800） and National Natural Science Foundation of China （60974059, 60736026, 61021063）
基金Project supported by the National Natural Science Foundation of China (Grant No. 60977005)
文摘The sub-land/sub-pit affects the characteristic of the tracking error signal which is generated by the conventional differential phase detection （DPD） method in the signal waveform modulation multi-level （SWML） read-only disc. To solve this problem, this paper proposes a new tracking error detection method using amplitude difference. Based on the diffraction theory, the amplitude difference is proportional to the tracking error and is feasible to be used for obtaining the off-track information. The experimental system of the amplitude difference detection method is developed. The experimental results show that the tracking error signal derived from the new method has better performance in uniformity and signal-to-noise ratio than that derived from the conventional DPD method in the SWML read-only disc.
文摘In order to solve problems in high dynamic environment, a frequency-locked loop （FLL） assisted phase-locked loop （PLL） is put forward for carrier tracking. On the basis of the analysis of discriminators, the total phase error of the tracking loop is analyzed and a general error expression is derived. By using linearization and Jaffe-Rechtin coefficients, the performance of a special first order FLL-assisted second order PLL is analyzed to get a closed expression. Analysis results and simula- tions show that there exist an optimal FLL loop bandwidth and a optimal PLL loop bandwidth which can make the phase jitter much less than that when the PLL is used alone.
基金National Natural Science Foundation of China (No. 50475038).
文摘Laser tracking system （LTS） is an advanced device for large size 3D coordinates measuring with the advantages of broad range, high speed and high accuracy. However, its measuring accuracy is highly dominated by the geometric errors of the tracking mirror mechanism. Proper calibration of LTS is essential prior to the use of it for metrology. A kinematics model that describes not only the motion but also the geometric variations of LTS is developed. Through error analysis of the proposed model, it is claimed that gimbals axis misalignments and tracking mirror center off-set are the key contributors to measuring errors of LTS. A self-calibration method is presented of calibrating LTS with planar constraints. Various calibration strategies utilizing single-plane and multiple-plane constraints are proposed for different situations. For each calibration strategy, issues about the error parameter estimation of LTS are exploded to find out in which conditions these parameters can be uniquely estimated. Moreover, these conditions reveal the applicability of the planar constraints to LTS self-calibration. Intensive studies have been made to check validity of the theoretical results. The results show that the measuring accuracy of LTS has increased by 5 times since this technique for calibration is used.
文摘Radar leveling system is the key equipment for improving the radar mobility and survival capability. A combined quantitative feedback theory (QFT) controller is designed for the radar truck leveling simulator in this paper, which suffers from strong nonlinearities and system parameter uncertainties. QFT can reduce the plant uncertainties and stabilize the system, but it fails to obtain high-precision tracking. This drawback can be solved by a robust QFT control scheme based on zero phase error tracking control (ZPETC) compensation. The combined controller not only possesses high robustness, but greatly improves the system performance. To verify the effiectiveness and the potential of the proposed controller, a series of experiments have been carried out. Experimental results have demonstrated its robustness against a large range of parameters variation and high tracking precision performance, as well as its capability of restraining the load coupling among channels. The combined QFT controller can drive the radar truck leveling platform accurately, quickly and stably.
文摘In this paper,the fixed-time time-varying formation of heterogeneous multi-agent systems(MASs) based on tracking error observer under denial-of-service(DoS) attacks is investigated.Firstly,the dynamic pinning strategy is used to reconstruct the communication channel for the system that suffers from DoS attacks to prevent the discontinuous transmission information of the communication network from affecting MASs formation.Then,considering that the leader state is not available to each follower under DoS attacks,a fixed-time distributed observer without velocity information is constructed to estimate the tracking error between followers and the leader.Finally,adaptive radial basis function neural network(RBFNN) is used to approximate the unknown ensemble disturbances in the system,and the fixed-time time-varying formation scheme is designed with the constructed observer.The effectiveness of the proposed control algorithm is demonstrated by the numerical simulation.
文摘The aim of this study was to predict drivers＇ drowsy states with high risk of encountering a crash and prevent drivers from continuing to drive under such drowsy states with high risk of crash. While the participants were required to carry out a simulated driving task, EEG （Electro encephalography） （EEG-MPF and EEG-α/β）, ECG （Electrocradiogram） （RRV3）, t racking error, an d subjective rating on drowsiness were measured. On the basis of such measurements, an attempt was made to predict the point in time with high crash risk using Bayesian estimation of posterior probability of drowsiness, tracking error, and subjective drowsiness. As a result of applying the proposed method to the data of each participant, it was verified that the proposed method could predict the point in time with high crash risk before the point in time of crash.
文摘This work focuses on a brief discussion of new concepts of using smartphone sensors for 3D painting in virtual or augmented reality. Motivation of this research comes from the idea of using different types of sensors which exist in our smartphones such as accelerometer, gyroscope, magnetometer etc. to track the position for painting in virtual reality, like Google Tilt Brush, but cost effectively. Research studies till date on estimating position and localization and tracking have been thoroughly reviewed to find the appropriate algorithm which will provide accurate result with minimum drift error. Sensor fusion, Inertial Measurement Unit (IMU), MEMS inertial sensor, Kalman filter based global translational localization systems are studied. It is observed, prevailing approaches consist issues such as stability, random bias drift, noisy acceleration output, position estimation error, robustness or accuracy, cost effectiveness etc. Moreover, issues with motions that do not follow laws of physics, bandwidth, restrictive nature of assumptions, scale optimization for large space are noticed as well. Advantages of such smartphone sensor based position estimation approaches include, less memory demand, very fast operation, making them well suited for real time problems and embedded systems. Being independent of the size of the system, they can work effectively for high dimensional systems as well. Through study of these approaches it is observed, extended Kalman filter gives the highest accuracy with reduced requirement of excess hardware during tracking. It renders better and faster result when used in accelerometer sensor. With the aid of various software, error accuracy can be increased further as well.
文摘The presence of systematic measuring errors complicates track-to-track association, spatially separates the tracks that correspond to the same true target, and seriously decline the performances of traditional track-to-track association algorithms. Consequently, the influence of radar systematic errors on tracks from different radars, which is described as some rotation and translation, has been analyzed theoretically in this paper. In addition, a novel approach named alignment-correlation method is developed to estimate and reduce this effect, align and correlate tracks accurately without prior registration using phase correlation technique and statistic binary track correlation algorithm. Monte-Carlo simulation results illustrate that the proposed algorithm has good performance in solving the track-to-track association problem with systematic errors in radar network and could provide effective and reliable associated tracks for the next step of registration.
基金Supported by National Natural Science Foundation of China(Grant Nos.52375018,92148301).
文摘Contour error is the deviation between the actual displacement and reference trajectory,which is directly related to the machining accuracy.Contour error compensation poses substantial challenges because of the time-varying,nonlinear,and strongly coupled characteristics of parallel machining modules.In addition,the time delay in the system reduces the timeliness of the feedback data,thereby making online contour error calculations and compensation particularly difficult.To solve this problem,the generation mechanism of the time delay of the feedback data and contour error is revealed,and a systematic method for the identification of the time-delay parameter based on Beckhoff’s tracking error calculation mechanism is proposed.The temporal alignment between the position commands and feedback data enables the online calculation of the contour error.On this basis,the tracking error of the drive axes(an important factor resulting in end-effector contour errors)is used for the contour error calculation.Considering the ambiguous parameter-setting logic of the servo drive,the servo parameter is calculated in reverse using the steady-state error to obtain the tracking error model of the drive axes.Furthermore,combined with the system time-delay model,an online correction method for the tracking error estimation model is established.To achieve an accurate mapping of the drive-axis tracking error and end-effector contour error,a bounded iterative search method for the nearest contour point and online calculation model for the contour error are respectively established.Finally,an online compensation controller for contour error is designed.Its effectiveness is verified by a machining experiment on a frame workpiece.The machining results show that the contour error reduces from 68μm to 45μm,and the finish machining accuracy increases by 34%.This study provides a feasible method for online compensation of contour error in a system with time delay.
基金supported by the Open Research Project from SKLMCCS (Grant No. 20120106)the Fundamental Research Funds for the Central Universities of China (Grant No. FRF-TP-13-018A)+1 种基金the Postdoctoral Science Foundation of China (Grant No. 2013M530527)the National Natural Science Foundation of China (Grant Nos. 61304079, 61125306, and 61034002)
文摘In this paper, an optimal tracking control scheme is proposed for a class of discrete-time chaotic systems using the approximation-error-based adaptive dynamic programming （ADP） algorithm. Via the system transformation, the optimal tracking problem is transformed into an optimal regulation problem, and then the novel optimal tracking control method is proposed. It is shown that for the iterative ADP algorithm with finite approximation error, the iterative performance index functions can converge to a finite neighborhood of the greatest lower bound of all performance index functions under some convergence conditions. Two examples are given to demonstrate the validity of the proposed optimal tracking control scheme for chaotic systems.
文摘Vehicle tracking plays a crucial role in intelligent transportation, autonomous driving, and video surveillance. However, challenges such as occlusion, multi-target interference, and nonlinear motion in dynamic scenarios make tracking accuracy and stability a focus of ongoing research. This paper proposes an integrated method combining YOLOv8 object detection with adaptive Kalman filtering. The approach employs a support vector machine (SVM) to dynamically select the optimal filter (including standard Kalman filter, extended Kalman filter, and unscented Kalman filter), enhancing the system’s adaptability to different motion patterns. Additionally, an error feedback mechanism is incorporated to dynamically adjust filter parameters, further improving responsiveness to sudden events. Experimental results on the KITTI and UA-DETRAC datasets demonstrate that the proposed method significantly improves detection accuracy (mAP@0.5 increased by approximately 3%), tracking accuracy (MOTA improved by 5%), and system robustness, providing an efficient solution for vehicle tracking in complex environments.
文摘平均光强分布是自由空间激光通信(Free Space Optical Communication,FSOC)性能分析中的一个重要参数,非零均值不等方差的跟踪误差场景下平均光强分布理论的封闭表达式尚未得出。采用统计平均的方法对非零均值不等方差跟踪误差下的平均光强分布进行建模并推导出其理论的封闭表达式,通过蒙特卡洛模拟对所推导的结果进行验证。在非零均值不等方差跟踪误差的影响下,高斯光束的平均光强分布廓线的形状和中心位置均发生变化。此外,采用相同面积的方形接收孔径代替圆形接收孔径,推导出非零均值不等方差跟踪误差下的平均接收功率。该工作能为非零均值不等方差跟踪误差下的自由空间激光通信系统性能分析和链路设计提供理论指导。
文摘针对无人机跟踪过程中目标遮挡和目标背景变化等因素导致的跟踪失败现象,提出一种M TF(M ean-shift by TWH and FB-error)跟踪算法。首先,在M ean-shift跟踪框架下引入目标加权直方图(TWH:Target-Weighted Histogram)描述目标,即在跟踪过程中,用目标的局部背景来削弱所有区域的内部背景特征,使目标特征突出;其次,添加FB-error约束,在目标被部分遮挡时,通过使用FB-error相关加权函数把目标当前位置的预测结果与Mean-shift矢量计算出的位置结果联合起来估计目标在t时刻的最终位置。实验表明,此跟踪算法在跟踪精度上有较大突破。
基金supported by the National Science and Technology Support Program(Grant.No.2012BAC22B03)the National Natural Science Foundation of China(Grant No.41475100)+1 种基金the Youth Innovation Promotion Association of Chinese Academy of Sciencesthe Japan Society for the Promotion of Science KAKENHI(Grant.No.26282111)
文摘This paper investigates the possible sources of errors associated with tropical cyclone （TC） tracks forecasted using the Global/Regional Assimilation and Prediction System （GRAPES）. The GRAPES forecasts were made for 16 landfaIling TCs in the western North Pacific basin during the 2008 and 2009 seasons, with a forecast length of 72 hours, and using the default initial conditions （＂initials＂, hereafter）, which are from the NCEP-FNL dataset, as well as ECMWF initials. The forecasts are compared with ECMWF forecasts. The results show that in most TCs, the GRAPES forecasts are improved when using the ECMWF initials compared with the default initials. Compared with the ECMWF initials, the default initials produce lower intensity TCs and a lower intensity subtropical high, but a higher intensity South Asia high and monsoon trough, as well as a higher temperature but lower specific humidity at the TC center. Replacement of the geopotential height and wind fields with the ECMWF initials in and around the TC center at the initial time was found to be the most efficient way to improve the forecasts. In addition, TCs that showed the greatest improvement in forecast accuracy usually had the largest initial uncertainties in TC intensity and were usually in the intensifying phase. The results demonstrate the importance of the initial intensity for TC track forecasts made using GRAPES, and indicate the model is better in describing the intensifying phase than the decaying phase of TCs. Finally, the limit of the improvement indicates that the model error associated with GRAPES forecasts may be the main cause of poor forecasts of landfalling TCs. Thus, further examinations of the model errors are required.
基金supported by the National Natural Science Fundation of China(41474027)
文摘The code tracking loop is a key component for user positioning. The pseudorange information of Bei Dou B1 signals has been fused and changed for vector tracking, so a correlation output model for complex scenarios is designed to prevent the propagation of error and valuate the signal performance. The relevant software and hardware factors that affect the output are analyzed.A single channel time-division multiplexing(TDM) method for multicorrelation data extraction is proposed. Statistical characteristics of the correlation output data for both vector and scalar structures are evaluated. Simulation results show that correlation outputs for both structures follow normal or Chi-squared distributions in normal conditions, and the Gamma distribution in harsh conditions. It is shown that a tracking model based on the multi-channel fusion hardly changes the probability distribution of the correlation output in the normal case, but it reduces the ranging error of the code loop, and hence the tracking ability of the code loop for weak signals is improved. Furthermore, vector tracking changes the pseudorange characteristics of channels anytime, and affects the mutual correlation outputs of the code loops in the abnormal case. This study provides a basis for the subsequent design of autonomous integrity algorithms for vector tracking.
