Programmable logic controller is a new type of industrial control devices based on microprocessor,which is developed with the help of computer and communication technologies.Gear oil filling machine is kind of compara...Programmable logic controller is a new type of industrial control devices based on microprocessor,which is developed with the help of computer and communication technologies.Gear oil filling machine is kind of comparatively precise non-standard filling equip ment,which uses high-precision quantitative cylinder to add gear oil into the automobile gearbox through the pipeline.展开更多
Motion controller plays a dominant role in motion control system. With the progress and improvement of motion control technology, the research and application of open, high-performance, low-cost and universal embedded...Motion controller plays a dominant role in motion control system. With the progress and improvement of motion control technology, the research and application of open, high-performance, low-cost and universal embedded motion controller becomes the necessity of the market. The major objective of the paper is to establish the basic software and hardware platform of a high-performance, low-cost and universal embedded motion controller and study the application. And the paper proposes the idea of developing a low-cost and economic touchscreen motion controller, which provides valuable reference for the relevant research and development in China.展开更多
The importance of the aircraft is increasing gradually;among them it may be called Ground Control Station (GCS) receiving the highest expectations. In aspect of operation, operator’s workload and working speed are on...The importance of the aircraft is increasing gradually;among them it may be called Ground Control Station (GCS) receiving the highest expectations. In aspect of operation, operator’s workload and working speed are one of the most important factors. Thus, we need to compare Touch mode and Non Touch mode in order to improve workload and working speed. In this paper, we analyzed the differences of Touch mode and Non Touch mode about workload, working speed in operation of aircraft. Through NASA-TLX and Measured working time, quantified data were collected and an analysis of variance (ANOVA) was performed. According to experimental result, working speed and workload according to input mode showed significant difference. In ground operation, Touch mode is better than Non Touch mode about working speed and workload. In the Touch mode, the optimal value of lower display angle was selected as 60。 angle.展开更多
Based on a 5 MSBs （most-significant-bits）-plus-5 LSBs （least-significant-bits） C-R hybrid D/A conver sion and low-offset pseudo-differential comparison approach, with capacitor array axially symmetric layout topol...Based on a 5 MSBs （most-significant-bits）-plus-5 LSBs （least-significant-bits） C-R hybrid D/A conver sion and low-offset pseudo-differential comparison approach, with capacitor array axially symmetric layout topology and resistor string low gradient mismatch placement method, an 8-channel 10-bit 200-kS/s SAR ADC （successiveapproximation-register analog-to-digital converter） IP core for a touch screen SoC （system-on-chip） is implemented in a 0.18 μm 1P5M CMOS logic process. Design considerations for the touch screen SAR ADC are included. With a 1.8 V power supply, the DNL （differential non-linearity） and INL （integral non-linearity） of this converter are measured to be about 0.32 LSB and 0.81 LSB respectively. With an input frequency of 91 kHz at 200-kS/s sampling rate, the spurious-free dynamic range and effective-number-of-bits are measured to be 63.2 dB and 9.15 bits respectively, and the power is about 136 μW. This converter occupies an area of about 0.08 mm^2. The design results show that it is very suitable for touch screen SoC applications.展开更多
文摘Programmable logic controller is a new type of industrial control devices based on microprocessor,which is developed with the help of computer and communication technologies.Gear oil filling machine is kind of comparatively precise non-standard filling equip ment,which uses high-precision quantitative cylinder to add gear oil into the automobile gearbox through the pipeline.
文摘Motion controller plays a dominant role in motion control system. With the progress and improvement of motion control technology, the research and application of open, high-performance, low-cost and universal embedded motion controller becomes the necessity of the market. The major objective of the paper is to establish the basic software and hardware platform of a high-performance, low-cost and universal embedded motion controller and study the application. And the paper proposes the idea of developing a low-cost and economic touchscreen motion controller, which provides valuable reference for the relevant research and development in China.
文摘The importance of the aircraft is increasing gradually;among them it may be called Ground Control Station (GCS) receiving the highest expectations. In aspect of operation, operator’s workload and working speed are one of the most important factors. Thus, we need to compare Touch mode and Non Touch mode in order to improve workload and working speed. In this paper, we analyzed the differences of Touch mode and Non Touch mode about workload, working speed in operation of aircraft. Through NASA-TLX and Measured working time, quantified data were collected and an analysis of variance (ANOVA) was performed. According to experimental result, working speed and workload according to input mode showed significant difference. In ground operation, Touch mode is better than Non Touch mode about working speed and workload. In the Touch mode, the optimal value of lower display angle was selected as 60。 angle.
基金Project supported by the National Natural Science Foundation of China(Nos.60725415,60971066,60676009,60776034,60803038)the National High-Tech Research and Development Program of China(Nos.2009AA01Z258,2009AA01Z260)the National Science & Technology Important Project of China(No.2009ZX01034-002-001-005)
文摘Based on a 5 MSBs （most-significant-bits）-plus-5 LSBs （least-significant-bits） C-R hybrid D/A conver sion and low-offset pseudo-differential comparison approach, with capacitor array axially symmetric layout topology and resistor string low gradient mismatch placement method, an 8-channel 10-bit 200-kS/s SAR ADC （successiveapproximation-register analog-to-digital converter） IP core for a touch screen SoC （system-on-chip） is implemented in a 0.18 μm 1P5M CMOS logic process. Design considerations for the touch screen SAR ADC are included. With a 1.8 V power supply, the DNL （differential non-linearity） and INL （integral non-linearity） of this converter are measured to be about 0.32 LSB and 0.81 LSB respectively. With an input frequency of 91 kHz at 200-kS/s sampling rate, the spurious-free dynamic range and effective-number-of-bits are measured to be 63.2 dB and 9.15 bits respectively, and the power is about 136 μW. This converter occupies an area of about 0.08 mm^2. The design results show that it is very suitable for touch screen SoC applications.
