Rationale: Endotoxin contamination in conventionally purified water poses serious risks to hemodialysis patients, leading to complications such as inflammation and sepsis. Addressing these risks is essential for enhan...Rationale: Endotoxin contamination in conventionally purified water poses serious risks to hemodialysis patients, leading to complications such as inflammation and sepsis. Addressing these risks is essential for enhancing patient safety and meeting global dialysis water quality standards. Advanced filtration technologies, such as titanium dioxide (TiO₂)-based nanoparticle filters, offer a promising approach to improve water purification processes in renal care. Objectives: This study aimed to develop and evaluate the effectiveness of a TiO₂-based nanoparticle microporous filtration system for hemodialysis water purification. The objectives included analyzing the system’s performance in reducing chemical contaminants (calcium, magnesium, aluminum, and lead) and microbiological contaminants (total viable count [TVC] and endotoxin units [EU]) across multiple renal centers. Methods: Water samples from three renal centers (RC1, RC2, and RC3) were analyzed pre- and post-filtration. TiO₂ nanoparticles were synthesized using the sol-gel method and characterized via Fourier Transform Infrared (FTIR) spectroscopy and Scanning Electron Microscopy with Energy Dispersive X-ray analysis (SEM/EDX). The microporous filter, fabricated with TiO₂ nanoparticles, silicon dioxide, and polyethylene glycol (PEG), was tested for its ability to remove contaminants. Analytical techniques included spectroscopy for chemical analysis and microbiological assays for contaminant quantification. Results: Post-treatment analysis revealed significant reductions in chemical contaminants, with removal efficiencies averaging 78% for calcium, 80% for magnesium, 81% for aluminum, and 76.6% for lead across all centers. Microbiological contamination was also substantially reduced, with 78–80% removal of TVC and 76–84.6% reduction in EU levels. FTIR analysis confirmed the presence of hydroxyl groups critical for adsorption, while SEM/EDX characterization revealed a crystalline structure with a particle size of 1.45 nm, pore size of 4.11 μm, filter height of 2.56 mm, and bulk density of 0.58 g/cm³. Conclusion: The TiO₂-based nanoparticle filtration system demonstrated high efficacy in removing chemical and microbiological contaminants, significantly improving water quality for hemodialysis. These results highlight its potential as a practical solution for renal centers, especially in resource-constrained settings. Further studies are needed to evaluate its long-term performance and feasibility for widespread adoption. Recommendation: Renal centers should consider adopting TiO2-based nanoparticle filters to address persistent water quality challenges. Pilot implementations across diverse settings can provide insights into operational feasibility. Additional research should explore scalability, maintenance requirements, and cost-effectiveness to optimize integration into healthcare systems. Significance Statement: This study introduces a practical and innovative solution to improve hemodialysis water purification. By effectively reducing both chemical and microbiological contaminants, the TiO2-based filtration system has the potential to enhance patient safety and outcomes, particularly in settings where maintaining high water quality standards remains challenging.展开更多
H2TiO3 was obtained from the acid-modified adsorbent precursor Li2TiO3,which was synthesized by a solid-phase reaction between TiO2 and Li2CO3.The extraction ratio of Li＋ from Li2TiO3 was 98.86%,almost with no Ti4＋ ...H2TiO3 was obtained from the acid-modified adsorbent precursor Li2TiO3,which was synthesized by a solid-phase reaction between TiO2 and Li2CO3.The extraction ratio of Li＋ from Li2TiO3 was 98.86%,almost with no Ti4＋ extracted.The effects of lithium titanium ratio,calcining temperature and time were investigated on the synthesis of Li2TiO3.Li2TiO3,H2TiO3 and the adsorbed Li＋ adsorbent were characterized by XRD and SEM.The lithium adsorption properties were investigated by the adsorption kinetics and adsorption isotherm.The results indicate that H2TiO3 has an excellent adsorptive capacity for Li＋.Two simplified kinetic models including the pseudo-first-order and pseudo-second-order equations were selected to follow the adsorption processes.The rate constants of adsorption for these kinetic models were calculated.The results show that the adsorption process can be described by the pseudo-second-order equation,and the process is proved to be a chemical adsorption.The adsorption process that H2TiO3 adsorbs Li＋ in LiCl solution well fits the Langmuir equation with monolayer adsorption.展开更多
The steel industry produces many byproducts, requiring extensive land for storage and causing significant environmental contamination. Industrial effluents discharged into water bodies negatively impact both aquatic e...The steel industry produces many byproducts, requiring extensive land for storage and causing significant environmental contamination. Industrial effluents discharged into water bodies negatively impact both aquatic ecosystems and human health. To solve this problem, this study synthesized a composite of titanium dioxide (TiO2) and steel slag nanocomposites (SSNC) at a 1:2 mass ratio to create a robust photocatalyst for the treatment of synthetic wastewater. The efficacy of this catalyst in degrading various dye pollutants, including methylene blue (MB), was tested under simulated solar light conditions. Comprehensive analyses were conducted to assess the physical and chemical characteristics, crystalline structure, energy gap, and point of zero charge of the composite. The TiO2-SSNC composite catalyst exhibited excellent stability, with a point of zero charge at 8.342 and an energy gap of 2.4 eV. The degradation process conformed to pseudo-first-order kinetics. Optimization of operational parameters was achieved through the response surface methodology. Reusability tests demonstrated that the TiO2-SSNC composite catalyst effectively degraded up to 93.41% of MB in the suspended mode and 92.03% in the coated mode after five cycles. Additionally, the degradation efficiencies for various dyes were significant, highlighting the potential of the composite for broad applications in industrial wastewater treatment. This study also explored the degradation mechanisms and identified byproducts, establishing a pathway for contaminant breakdown. The cost-benefit analysis revealed a total cost of 0.842 8 USD per cubic meter for each treatment activity, indicating low operational and production costs. These findings underscore the promise of the TiO2-SSNC composite as a cost-effective and efficient alternative for wastewater purification.展开更多
Synergistic interplays involving multiple active centers originating from TiO2 nanotube layers(TNT)and ruthenium(Ru)species comprising of both single atoms(SAs)and nanoparticles(NPs)augment the alkaline hydrogen evolu...Synergistic interplays involving multiple active centers originating from TiO2 nanotube layers(TNT)and ruthenium(Ru)species comprising of both single atoms(SAs)and nanoparticles(NPs)augment the alkaline hydrogen evolution reaction(HER)by enhancing Volmer kinetics from rapid water dissociation and improving Tafel kinetics from efficient H*desorption.Atomic layer deposition of Ru with 50 process cycles results in a mixture of Ru SAs and 2.8-0.4 nm NPs present on TNT layers,and it emerges with the highest HER activity among all the electrodes synthesized.A detailed study of the Ti and Ru species using different high-resolution techniques confirmed the presence of Ti^(3+)states and the coexistence of Ru SAs and NPs.With insights from literature,the role of Ti^(3+),appropriate work functions of TNT layers and Ru,and the synergistic effect of Ru SAs and Ru NPs in improving the performance of alkaline HER were elaborated and justified.The aforementioned characteristics led to a remarkable performance by having 9mV onset potentials and 33 mV dec^(-1) of Tafel slopes and a higher turnover frequency of 1.72 H2 s^(-1) at 30 mV.Besides,a notable stability from 28 h staircase chronopotentiometric measurements for TNT@Ru surpasses TNT@Pt in comparison.展开更多
TiO2 nanoparticles were prepared using the hydrothermal method and modified with CgN to syn-thesize a Type-Ⅱheterojunction semiconductor photocatalyst,TiO2-C;Na.In addition,a carbon layerwas coated onto the TiO2 nano...TiO2 nanoparticles were prepared using the hydrothermal method and modified with CgN to syn-thesize a Type-Ⅱheterojunction semiconductor photocatalyst,TiO2-C;Na.In addition,a carbon layerwas coated onto the TiO2 nanoparticles and the obtained material was uniformly covered on thesurface of CaNa to form an all-solid-state Z-scheme semiconductor photocatalyst,TiO2-C-C3N4,Through characterization by XRD,XPS,SEM,TEM,BET,photoelectrochemical experiments,UV-visible diffuse reflection,and PL spectroscopy,the charge transfer mechanism and band gappositions for the composite photocatalysts were analyzed.The Type-Ⅱand all-solid-state Z-schemeheterojunction structures were compared.By combining microscopic internal mechanisms withmacroscopic experimental phenomena,the relationship between performance and structure wasverified.Experimental methods were used to explore the adaptation degree of different photocata-lytic mechanisms using the same degradation system.This study highlights effective photocatalystdesign to meet the requirements for specific degradation conditions.展开更多
TiO2 nanotubes were prepared under normal pressure at a temperature of 120 ℃. Ag, Au, Pt nanoparticles supported on TiO2 nanotubes were prepared by m icrowave assisted heating polyol process. TEM images showed that m...TiO2 nanotubes were prepared under normal pressure at a temperature of 120 ℃. Ag, Au, Pt nanoparticles supported on TiO2 nanotubes were prepared by m icrowave assisted heating polyol process. TEM images showed that microwave prepa red Ag, Au, Pt nanoparticles supported on TiO2 nanotubes were small and well dis persed on the surface of the TiO2 nanotubes. UV-Vis absorption spectra showed th at the absorbance of Ag/TiO2 nanotubes and Au/TiO2 nanotubes in the visible ligh t range increased greatly compared to the single titania nanotubes.展开更多
TiO_(2)is a well-known photocatalyst with a band gap of 3.2 eV,yet its ability to absorb light is limited to the short wavelengths of ultraviolet light.To achieve a more effective photocatalytic material,we have desig...TiO_(2)is a well-known photocatalyst with a band gap of 3.2 eV,yet its ability to absorb light is limited to the short wavelengths of ultraviolet light.To achieve a more effective photocatalytic material,we have designed two-dimensional semiconductor TiOS materials using swarm intelligence algorithms combined with first-principles calculations.Three stable low-energy structures with space groups of P2_(1)/m,P3m1 and P2_(1)/c are identified.Among these structures,the Janus P3m1 phase is a direct bandgap semiconductor,while the P2_(1)/m and P2_(1)/c phases are indirect bandgap semiconductors.Utilizing the accurate hybrid density functional HSE06 method,the band gaps of the three structures are calculated to be 2.34 eV(P2_(1)/m),2.24 eV(P3m1)and 3.22 eV(P2_(1)/c).Optical calculations reveal that TiOS materials exhibit a good light-harvesting capability in both visible and ultraviolet spectral ranges.Moreover,the photocatalytic calculations also indicate that both P2_(1)/m and P3m1 TiOS can provide a strong driving force for converting H_(2)O to H_(2)and O_(2)in an acidic environment with pH=0.The structural stabilities,mechanical properties,electronic structures and hydrogen evolution reaction activities are also discussed in detail.Our research suggests that two-dimensional TiOS materials have potential applications in both semiconductor devices and photocatalysis.展开更多
Both Ti foil and porous Ti were anodized in 0.5%HF and in ethylene glycol electrolyte containing 0.5%NH4F(mass fraction) separately. The results show that TiO2 nanotubes can be formed on Ti foil by both processes, whe...Both Ti foil and porous Ti were anodized in 0.5%HF and in ethylene glycol electrolyte containing 0.5%NH4F(mass fraction) separately. The results show that TiO2 nanotubes can be formed on Ti foil by both processes, whereas TiO2 nanotubes can be formed on porous Ti only in the second process. The overhigh current density led to the failure of the formation nanotubes on porous Ti in 0.5%HF electrolyte. TiO2 nanotubes were characterized by SEM and XRD. TiO2 nanotubes on porous Ti were thinner than those on Ti foil. Anatase was formed when TiO2 nanotubes were annealed at 400 °C and fully turned into rutile at 700 °C. To obtain good photodegradation, the optimal heat treatment temperature of TiO2 nanotubes was 450 °C. The porosity of the substrates influenced photodegradation properties. TiO2 nanotubes on porous Ti with 60% porosity had the best photodegradation.展开更多
文摘Rationale: Endotoxin contamination in conventionally purified water poses serious risks to hemodialysis patients, leading to complications such as inflammation and sepsis. Addressing these risks is essential for enhancing patient safety and meeting global dialysis water quality standards. Advanced filtration technologies, such as titanium dioxide (TiO₂)-based nanoparticle filters, offer a promising approach to improve water purification processes in renal care. Objectives: This study aimed to develop and evaluate the effectiveness of a TiO₂-based nanoparticle microporous filtration system for hemodialysis water purification. The objectives included analyzing the system’s performance in reducing chemical contaminants (calcium, magnesium, aluminum, and lead) and microbiological contaminants (total viable count [TVC] and endotoxin units [EU]) across multiple renal centers. Methods: Water samples from three renal centers (RC1, RC2, and RC3) were analyzed pre- and post-filtration. TiO₂ nanoparticles were synthesized using the sol-gel method and characterized via Fourier Transform Infrared (FTIR) spectroscopy and Scanning Electron Microscopy with Energy Dispersive X-ray analysis (SEM/EDX). The microporous filter, fabricated with TiO₂ nanoparticles, silicon dioxide, and polyethylene glycol (PEG), was tested for its ability to remove contaminants. Analytical techniques included spectroscopy for chemical analysis and microbiological assays for contaminant quantification. Results: Post-treatment analysis revealed significant reductions in chemical contaminants, with removal efficiencies averaging 78% for calcium, 80% for magnesium, 81% for aluminum, and 76.6% for lead across all centers. Microbiological contamination was also substantially reduced, with 78–80% removal of TVC and 76–84.6% reduction in EU levels. FTIR analysis confirmed the presence of hydroxyl groups critical for adsorption, while SEM/EDX characterization revealed a crystalline structure with a particle size of 1.45 nm, pore size of 4.11 μm, filter height of 2.56 mm, and bulk density of 0.58 g/cm³. Conclusion: The TiO₂-based nanoparticle filtration system demonstrated high efficacy in removing chemical and microbiological contaminants, significantly improving water quality for hemodialysis. These results highlight its potential as a practical solution for renal centers, especially in resource-constrained settings. Further studies are needed to evaluate its long-term performance and feasibility for widespread adoption. Recommendation: Renal centers should consider adopting TiO2-based nanoparticle filters to address persistent water quality challenges. Pilot implementations across diverse settings can provide insights into operational feasibility. Additional research should explore scalability, maintenance requirements, and cost-effectiveness to optimize integration into healthcare systems. Significance Statement: This study introduces a practical and innovative solution to improve hemodialysis water purification. By effectively reducing both chemical and microbiological contaminants, the TiO2-based filtration system has the potential to enhance patient safety and outcomes, particularly in settings where maintaining high water quality standards remains challenging.
基金Project(2008BAB35B04) supported by the National Key Technologies R&D Program of ChinaProject(2010QZZD003) supported by Central South University Advanced Research Program,China
文摘H2TiO3 was obtained from the acid-modified adsorbent precursor Li2TiO3,which was synthesized by a solid-phase reaction between TiO2 and Li2CO3.The extraction ratio of Li＋ from Li2TiO3 was 98.86%,almost with no Ti4＋ extracted.The effects of lithium titanium ratio,calcining temperature and time were investigated on the synthesis of Li2TiO3.Li2TiO3,H2TiO3 and the adsorbed Li＋ adsorbent were characterized by XRD and SEM.The lithium adsorption properties were investigated by the adsorption kinetics and adsorption isotherm.The results indicate that H2TiO3 has an excellent adsorptive capacity for Li＋.Two simplified kinetic models including the pseudo-first-order and pseudo-second-order equations were selected to follow the adsorption processes.The rate constants of adsorption for these kinetic models were calculated.The results show that the adsorption process can be described by the pseudo-second-order equation,and the process is proved to be a chemical adsorption.The adsorption process that H2TiO3 adsorbs Li＋ in LiCl solution well fits the Langmuir equation with monolayer adsorption.
基金supported by the Department of Chemical and Petrochemical Engineering,Egypt-Japan University of Science and Technology.
文摘The steel industry produces many byproducts, requiring extensive land for storage and causing significant environmental contamination. Industrial effluents discharged into water bodies negatively impact both aquatic ecosystems and human health. To solve this problem, this study synthesized a composite of titanium dioxide (TiO2) and steel slag nanocomposites (SSNC) at a 1:2 mass ratio to create a robust photocatalyst for the treatment of synthetic wastewater. The efficacy of this catalyst in degrading various dye pollutants, including methylene blue (MB), was tested under simulated solar light conditions. Comprehensive analyses were conducted to assess the physical and chemical characteristics, crystalline structure, energy gap, and point of zero charge of the composite. The TiO2-SSNC composite catalyst exhibited excellent stability, with a point of zero charge at 8.342 and an energy gap of 2.4 eV. The degradation process conformed to pseudo-first-order kinetics. Optimization of operational parameters was achieved through the response surface methodology. Reusability tests demonstrated that the TiO2-SSNC composite catalyst effectively degraded up to 93.41% of MB in the suspended mode and 92.03% in the coated mode after five cycles. Additionally, the degradation efficiencies for various dyes were significant, highlighting the potential of the composite for broad applications in industrial wastewater treatment. This study also explored the degradation mechanisms and identified byproducts, establishing a pathway for contaminant breakdown. The cost-benefit analysis revealed a total cost of 0.842 8 USD per cubic meter for each treatment activity, indicating low operational and production costs. These findings underscore the promise of the TiO2-SSNC composite as a cost-effective and efficient alternative for wastewater purification.
基金support from the European Union Horizon 2020 program(project HERMES,nr.952184)the Ministry of Education,Youth and Sports of the Czech Republic for supporting CEMNAT(LM2023037)+1 种基金Czech-NanoLab(LM2023051)infrastructures for providing ALD,SEM,EDX,XPS,TEM,and XRDCzech Science Foundation(project 23-08019X,EXPRO).
文摘Synergistic interplays involving multiple active centers originating from TiO2 nanotube layers(TNT)and ruthenium(Ru)species comprising of both single atoms(SAs)and nanoparticles(NPs)augment the alkaline hydrogen evolution reaction(HER)by enhancing Volmer kinetics from rapid water dissociation and improving Tafel kinetics from efficient H*desorption.Atomic layer deposition of Ru with 50 process cycles results in a mixture of Ru SAs and 2.8-0.4 nm NPs present on TNT layers,and it emerges with the highest HER activity among all the electrodes synthesized.A detailed study of the Ti and Ru species using different high-resolution techniques confirmed the presence of Ti^(3+)states and the coexistence of Ru SAs and NPs.With insights from literature,the role of Ti^(3+),appropriate work functions of TNT layers and Ru,and the synergistic effect of Ru SAs and Ru NPs in improving the performance of alkaline HER were elaborated and justified.The aforementioned characteristics led to a remarkable performance by having 9mV onset potentials and 33 mV dec^(-1) of Tafel slopes and a higher turnover frequency of 1.72 H2 s^(-1) at 30 mV.Besides,a notable stability from 28 h staircase chronopotentiometric measurements for TNT@Ru surpasses TNT@Pt in comparison.
文摘TiO2 nanoparticles were prepared using the hydrothermal method and modified with CgN to syn-thesize a Type-Ⅱheterojunction semiconductor photocatalyst,TiO2-C;Na.In addition,a carbon layerwas coated onto the TiO2 nanoparticles and the obtained material was uniformly covered on thesurface of CaNa to form an all-solid-state Z-scheme semiconductor photocatalyst,TiO2-C-C3N4,Through characterization by XRD,XPS,SEM,TEM,BET,photoelectrochemical experiments,UV-visible diffuse reflection,and PL spectroscopy,the charge transfer mechanism and band gappositions for the composite photocatalysts were analyzed.The Type-Ⅱand all-solid-state Z-schemeheterojunction structures were compared.By combining microscopic internal mechanisms withmacroscopic experimental phenomena,the relationship between performance and structure wasverified.Experimental methods were used to explore the adaptation degree of different photocata-lytic mechanisms using the same degradation system.This study highlights effective photocatalystdesign to meet the requirements for specific degradation conditions.
文摘TiO2 nanotubes were prepared under normal pressure at a temperature of 120 ℃. Ag, Au, Pt nanoparticles supported on TiO2 nanotubes were prepared by m icrowave assisted heating polyol process. TEM images showed that microwave prepa red Ag, Au, Pt nanoparticles supported on TiO2 nanotubes were small and well dis persed on the surface of the TiO2 nanotubes. UV-Vis absorption spectra showed th at the absorbance of Ag/TiO2 nanotubes and Au/TiO2 nanotubes in the visible ligh t range increased greatly compared to the single titania nanotubes.
基金supported by the National Natural Science Foundation of China(Grant Nos.52272219 and U1904612)the Natural Science Foundation of Henan Province(Grant No.242300421191).
文摘TiO_(2)is a well-known photocatalyst with a band gap of 3.2 eV,yet its ability to absorb light is limited to the short wavelengths of ultraviolet light.To achieve a more effective photocatalytic material,we have designed two-dimensional semiconductor TiOS materials using swarm intelligence algorithms combined with first-principles calculations.Three stable low-energy structures with space groups of P2_(1)/m,P3m1 and P2_(1)/c are identified.Among these structures,the Janus P3m1 phase is a direct bandgap semiconductor,while the P2_(1)/m and P2_(1)/c phases are indirect bandgap semiconductors.Utilizing the accurate hybrid density functional HSE06 method,the band gaps of the three structures are calculated to be 2.34 eV(P2_(1)/m),2.24 eV(P3m1)and 3.22 eV(P2_(1)/c).Optical calculations reveal that TiOS materials exhibit a good light-harvesting capability in both visible and ultraviolet spectral ranges.Moreover,the photocatalytic calculations also indicate that both P2_(1)/m and P3m1 TiOS can provide a strong driving force for converting H_(2)O to H_(2)and O_(2)in an acidic environment with pH=0.The structural stabilities,mechanical properties,electronic structures and hydrogen evolution reaction activities are also discussed in detail.Our research suggests that two-dimensional TiOS materials have potential applications in both semiconductor devices and photocatalysis.
基金Project(1254G024)supported by the Young Core Instructor Foundation from Heilongjiang Educational Committee,ChinaProject(2012RFQXS113)supported by Scientific and Technological Innovation Talents of Harbin,China
文摘Both Ti foil and porous Ti were anodized in 0.5%HF and in ethylene glycol electrolyte containing 0.5%NH4F(mass fraction) separately. The results show that TiO2 nanotubes can be formed on Ti foil by both processes, whereas TiO2 nanotubes can be formed on porous Ti only in the second process. The overhigh current density led to the failure of the formation nanotubes on porous Ti in 0.5%HF electrolyte. TiO2 nanotubes were characterized by SEM and XRD. TiO2 nanotubes on porous Ti were thinner than those on Ti foil. Anatase was formed when TiO2 nanotubes were annealed at 400 °C and fully turned into rutile at 700 °C. To obtain good photodegradation, the optimal heat treatment temperature of TiO2 nanotubes was 450 °C. The porosity of the substrates influenced photodegradation properties. TiO2 nanotubes on porous Ti with 60% porosity had the best photodegradation.
