(Quasi-)closed-form results for the statistical properties of unmanned aerial vehicle(UAV)airto-ground channels are derived for the first time using a novel spatial-vector-based method from a threedimensional(3-D)arbi...(Quasi-)closed-form results for the statistical properties of unmanned aerial vehicle(UAV)airto-ground channels are derived for the first time using a novel spatial-vector-based method from a threedimensional(3-D)arbitrary-elevation one-cylinder model.The derived results include a closed-form expression for the space-time correlation function and some quasi-closed-form ones for the space-Doppler power spectrum density,the level crossing rate,and the average fading duration,which are shown to be the generalizations of those previously obtained from the two-dimensional(2-D)one-ring model and the 3-D low-elevation one-cylinder model for terrestrial mobile-to-mobile channels.The close agreements between the theoretical results and the simulations as well as the measurements validate the utility of the derived channel statistics.Based on the derived expressions,the impacts of some parameters on the channel characteristics are investigated in an effective,efficient,and explicable way,which leads to a general guideline on the manual parameter estimation from the measurement description.展开更多
Accurate parameter extraction of photovoltaic(PV)models plays a critical role in enabling precise performance prediction,optimal system sizing,and effective operational control under diverse environmental conditions.W...Accurate parameter extraction of photovoltaic(PV)models plays a critical role in enabling precise performance prediction,optimal system sizing,and effective operational control under diverse environmental conditions.While a wide range of metaheuristic optimisation techniques have been applied to this problem,many existing methods are hindered by slow convergence rates,susceptibility to premature stagnation,and reduced accuracy when applied to complex multi-diode PV configurations.These limitations can lead to suboptimal modelling,reducing the efficiency of PV system design and operation.In this work,we propose an enhanced hybrid optimisation approach,the modified Spider Wasp Optimization(mSWO)with Opposition-Based Learning algorithm,which integrates the exploration and exploitation capabilities of the Spider Wasp Optimization(SWO)metaheuristic with the diversityenhancing mechanism of Opposition-Based Learning(OBL).The hybridisation is designed to dynamically expand the search space coverage,avoid premature convergence,and improve both convergence speed and precision in highdimensional optimisation tasks.The mSWO algorithm is applied to three well-established PV configurations:the single diode model(SDM),the double diode model(DDM),and the triple diode model(TDM).Real experimental current-voltage(I-V)datasets from a commercial PV module under standard test conditions(STC)are used for evaluation.Comparative analysis is conducted against eighteen advanced metaheuristic algorithms,including BSDE,RLGBO,GWOCS,MFO,EO,TSA,and SCA.Performance metrics include minimum,mean,and maximum root mean square error(RMSE),standard deviation(SD),and convergence behaviour over 30 independent runs.The results reveal that mSWO consistently delivers superior accuracy and robustness across all PV models,achieving the lowest RMSE values of 0.000986022(SDM),0.000982884(DDM),and 0.000982529(TDM),with minimal SD values,indicating remarkable repeatability.Convergence analyses further show that mSWO reaches optimal solutions more rapidly and with fewer oscillations than all competing methods,with the performance gap widening as model complexity increases.These findings demonstrate that mSWO provides a scalable,computationally efficient,and highly reliable framework for PV parameter extraction.Its adaptability to models of growing complexity suggests strong potential for broader applications in renewable energy systems,including performance monitoring,fault detection,and intelligent control,thereby contributing to the optimisation of next-generation solar energy solutions.展开更多
This paper presents an efficient model reduction technique for linear time-varying systems based on shifted Legendre polynomials.The approach constructs approximate low-rank decomposition factors of finite-time Gramia...This paper presents an efficient model reduction technique for linear time-varying systems based on shifted Legendre polynomials.The approach constructs approximate low-rank decomposition factors of finite-time Gramians directly from the expansion coefficients of impulse responses.Leveraging these factors,we develop two model reduction algorithms that integrate the low-rank square root method with dominant subspace projection.Our method is computationally efficient and flexible,requiring only a few matrix-vector operations and a singular value decomposition of a low-dimensional matrix,thereby avoiding the need to solve differential Lyapunov equations.Numerical experiments confirm the effectiveness of the proposed approach.展开更多
This paper examines whether the parametric regression model is correctly specified for both source and target data and whether the regression pattern in the source domain aligns with that of the target domain.This eva...This paper examines whether the parametric regression model is correctly specified for both source and target data and whether the regression pattern in the source domain aligns with that of the target domain.This evaluation is a critical prerequisite for applying model-based transfer learning methods under covariate shift assumptions.Traditional regression model checks and twosample regression tests are insufficient to address this issue.To overcome these limitations,the authors propose a novel adaptive-to-regression test statistic that is asymptotically distribution-free.Under the null hypothesis,the test follows a chi-square weak limit,preserving the significance level and enabling critical value determination without resampling techniques.Additionally,the authors systematically analyze the test's power performance,highlighting its sensitivity to different sub-local alternatives that deviate from the null hypothesis.Numerical studies,including simulations,assess finite-sample performance,and a real-world data example is provided for illustration.展开更多
After a long period of water flooding development,the oilfield has entered the middle and high water cut stage.The physical properties of reservoirs are changed by water erosion,which directly impacts reservoir develo...After a long period of water flooding development,the oilfield has entered the middle and high water cut stage.The physical properties of reservoirs are changed by water erosion,which directly impacts reservoir development.Conventional numerical reservoir simulation methodologies typically employ static assumptions for model construction,presuming invariant reservoir geological parameters throughout the development process while neglecting the reservoir’s temporal evolution characteristics.Although such simplifications reduce computational complexity,they introduce substantial descriptive inaccuracies.Therefore,this paper proposes a meshless numerical simulation method for reservoirs that considers time-varying characteristics.This method avoids the meshing in traditional numerical simulation methods.From the fluid flow perspective,the reservoir’s computational domain is discretized into a series of connection units.An influence domain with a certain radius centered on the nodes is selected,and one-dimensional connection units are established between the nodes to achieve the characterization of the flow topology structure of the reservoir.In order to reflect the dynamic evolution of the reservoir’s physical properties during the water injection development process,the time-varying characteristics are incorporated into the formula of the seepage characteristic parameters in the meshless calculation.The change relationship of the permeability under different surface fluxes is considered to update the calculated connection conductivity in real time.By combining with the seepage control equation for solution,a time-varying meshless numerical simulation method is formed.The results show that compared with the numerical simulationmethod of the connection elementmethod(CEM)that only considers static parameters,this method has higher simulation accuracy and can better simulate the real migration and distribution of oil and water in the reservoir.Thismethod improves the accuracy of reservoir numerical simulation and the development effect of oilfields,providing a scientific basis for optimizing the water injection strategy,adjusting the production plan,and extending the effective production cycle of the oilfield.展开更多
Promoting the high penetration of renewable energies like photovoltaic(PV)systems has become an urgent issue for expanding modern power grids and has accomplished several challenges compared to existing distribution g...Promoting the high penetration of renewable energies like photovoltaic(PV)systems has become an urgent issue for expanding modern power grids and has accomplished several challenges compared to existing distribution grids.This study measures the effectiveness of the Puma optimizer(PO)algorithm in parameter estimation of PSC(perovskite solar cells)dynamic models with hysteresis consideration considering the electric field effects on operation.The models used in this study will incorporate hysteresis effects to capture the time-dependent behavior of PSCs accurately.The PO optimizes the proposed modified triple diode model(TDM)with a variable voltage capacitor and resistances(VVCARs)considering the hysteresis behavior.The suggested PO algorithm contrasts with other wellknown optimizers from the literature to demonstrate its superiority.The results emphasize that the PO realizes a lower RMSE(Root mean square errors),which proves its capability and efficacy in parameter extraction for the models.The statistical results emphasize the efficiency and supremacy of the proposed PO compared to the other well-known competing optimizers.The convergence rates show good,fast,and stable convergence rates with lower RMSE via PO compared to the other five competitive optimizers.Moreover,the lowermean realized via the PO optimizer is illustrated by the box plot for all optimizers.展开更多
The constitutive model is essential for predicting the deformation and stability of rocksoil mass.The estimation of constitutive model parameters is a necessary and important task for the reliable characterization of ...The constitutive model is essential for predicting the deformation and stability of rocksoil mass.The estimation of constitutive model parameters is a necessary and important task for the reliable characterization of mechanical behaviors.However,constitutive model parameters cannot be evaluated accurately with a limited amount of test data,resulting in uncertainty in the prediction of stress-strain curves.This paper proposes a Bayesian analysis framework to address this issue.It combines the Bayesian updating with the structural reliability and adaptive conditional sampling methods to assess the equation parameter of constitutive models.Based on the triaxial and ring shear tests on shear zone soils from the Huangtupo landslide,a statistical damage constitutive model and a critical state hypoplastic constitutive model were used to demonstrate the effectiveness of the proposed framework.Moreover,the parameter uncertainty effects of the damage constitutive model on landslide stability were investigated.Results show that reasonable assessments of the constitutive model parameter can be well realized.The variability of stress-strain curves is strongly related to the model prediction performance.The estimation uncertainty of constitutive model parameters should not be ignored for the landslide stability calculation.Our study provides a reference for uncertainty analysis and parameter assessment of the constitutive model.展开更多
Objective To develop an onset risk prediction nomogram for patients with homocysteine-type(H-type)hypertension(HTH)based on pulse diagram parameters to assist early clinical prediction and diagnosis of HTH.Methods Pat...Objective To develop an onset risk prediction nomogram for patients with homocysteine-type(H-type)hypertension(HTH)based on pulse diagram parameters to assist early clinical prediction and diagnosis of HTH.Methods Patients diagnosed with essential hypertension and admitted to Shanghai Shuguang Hospital Affiliated to Shanghai University of Traditional Chinese Medicine,Shang-hai Hospital of Traditional Chinese Medicine,and Shanghai Hospital of Integrated Tradition-al Chinese and Western Medicine from July 6th 2020 to June 16th 2021,and from August 11th 2023 to January 22nd 2024,were enrolled in this retrospective research.The baselines and clinical biochemical indicators of patients were collected.The SMART-I TCM pulse instru-ment was applied to gather pulse diagram parameters.Multivariate logistic regression was adopted to analyze the risk factors for HTH.RStudio was employed to construct the nomo-gram model,receiver operating characteristic(ROC)curve,and calibration curve(bootstrap self-sampling 200 times),and clinical decision curve were drawn to evaluate the model’s dis-crimination and clinical effectiveness.Results A total of 168 hospitalized patients with essential hypertension were selected and di-vided into non-HTH group(n=29)and HTH group(n=139).Compared with non-HTH group,HTH group had a lower body mass index(BMI),and higher proportions of male pa-tients and drinkers(P<0.05).The ventricular wall thickening(VWT)could not be deter-mined.The proportions of left common carotid intima-media wall thickness(LCCIMWT)and serum creatinine(SCR)were higher in HTH group(P<0.05).The pulse diagram parameter As was significantly higher,and H4/H1 and T1/T were lower in HTH group(P<0.05).Gender,al-cohol consumption,serum creatinine,and the pulse diagram parameter H4/H1 were identi-fied as independent risk factors for HTH(P<0.05).The nomogram’s area under the ROC curve(AUC)was 0.795[95%confidence interval(CI):(0.7066,0.8828)],with a specificity of 0.724 and sensitivity of 0.799.After 200 times repeated bootstrap self-samplings,the calibra-tion curve showed that the simulated curve fits well with the actual curve(x^(2)=9.5002,P=0.3019).The clinical decision curve indicated that the nomogram’s applicability was optimal when the threshold for predicting HTH was between 0.38 and 1.00.Conclusion The nomogram model could be valuable for predicting the onset risk of HTH and pulse diagram parameters can facilitate early screening and prevention of HTH.展开更多
The complex geometrical features of mechanical components significantly influence contact interactions and system dynamics.However,directly modeling contact forces on surfaces with intricate geometries presents consid...The complex geometrical features of mechanical components significantly influence contact interactions and system dynamics.However,directly modeling contact forces on surfaces with intricate geometries presents considerable challenges.This study focuses on the helically twisted wire rope-sheave contact and proposes a contact force model that incorporates complex geometric features through a parameter identification approach.The model's impact on contact forces and system dynamics is thoroughly investigated.Leveraging a point contact model and an elliptic integral approximation,a loss function is formulated using the finite element(FE)contact model results as the reference data.Geometric parameters are subsequently determined by optimizing this loss function via a genetic algorithm(GA).The findings reveal that the contact stiffness increases with the wire rope pitch length,the radius of principal curvature,and the elliptic eccentricity of the contact zone.The proposed contact force model is integrated into a rigid-flexible coupled dynamics model,developed by the absolute node coordinate formulation,to examine the effects of contact geometry on system dynamics.The results demonstrate that the variations in wire rope geometry alter the contact stiffness,which in turn affects dynamic rope tension through frictional energy dissipation.The enhanced model's predictions exhibit superior alignment with the experimental data,thereby validating the methodology.This approach provides new insights for deducing the contact geometry from kinetic parameters and monitoring the performance degradation of mechanical components.展开更多
Accurate and reliable photovoltaic(PV)modeling is crucial for the performance evaluation,control,and optimization of PV systems.However,existing methods for PV parameter identification often suffer from limitations in...Accurate and reliable photovoltaic(PV)modeling is crucial for the performance evaluation,control,and optimization of PV systems.However,existing methods for PV parameter identification often suffer from limitations in accuracy and efficiency.To address these challenges,we propose an adaptive multi-learning cooperation search algorithm(AMLCSA)for efficient identification of unknown parameters in PV models.AMLCSA is a novel algorithm inspired by teamwork behaviors in modern enterprises.It enhances the original cooperation search algorithm in two key aspects:(i)an adaptive multi-learning strategy that dynamically adjusts search ranges using adaptive weights,allowing better individuals to focus on local exploitation while guiding poorer individuals toward global exploration;and(ii)a chaotic grouping reflection strategy that introduces chaotic sequences to enhance population diversity and improve search performance.The effectiveness of AMLCSA is demonstrated on single-diode,double-diode,and three PV-module models.Simulation results show that AMLCSA offers significant advantages in convergence,accuracy,and stability compared to existing state-of-the-art algorithms.展开更多
Recent discovery of high transition temperature superconductivity in La_(3)Ni_(2)O_(7) has sparked renewed theoretical and experimental interests in unconventional superconductivity. It is crucial to understand the in...Recent discovery of high transition temperature superconductivity in La_(3)Ni_(2)O_(7) has sparked renewed theoretical and experimental interests in unconventional superconductivity. It is crucial to understand the influence of various factors on its superconductivity. By refining the determinant quantum Monte Carlo algorithm, we characterize the parameter dependence of the superconducting transition temperature within a bilayer Hubbard model, which is sign-problem-free at arbitrary filling. A striking feature of this model is its similarity to the bilayer nickelate-based superconductor La_(3)Ni_(2)O_(7), where superconductivity emerges from the bilayer NiO_(2) planes.We find that interlayer spin-exchange J is critical to interlayer pairing, and that on-site interaction U contributes negatively to superconductivity at low doping levels but positively at high doping levels. Our findings can provide a reference for the next step in theoretical research on nickelate-based superconductors.展开更多
Accurate modeling and parameter estimation of sea clutter are fundamental for effective sea surface target detection.With the improvement of radar resolution,sea clutter exhibits a pronounced heavy-tailed characterist...Accurate modeling and parameter estimation of sea clutter are fundamental for effective sea surface target detection.With the improvement of radar resolution,sea clutter exhibits a pronounced heavy-tailed characteristic,rendering traditional distribution models and parameter estimation methods less effective.To address this,this paper proposes a dual compound-Gaussian model with inverse Gaussian texture(CG-IG)distribution model and combines it with an improved Adam algorithm to introduce a method for parameter correction.This method effectively fits sea clutter with heavy-tailed characteristics.Experiments with real measured sea clutter data show that the dual CGIG distribution model,after parameter correction,accurately describes the heavy-tailed phenomenon in sea clutter amplitude distribution,and the overall mean square error of the distribution is reduced.展开更多
This research investigates the influence of indoor and outdoor factors on photovoltaic(PV)power generation at Utrecht University to accurately predict PV system performance by identifying critical impact factors and i...This research investigates the influence of indoor and outdoor factors on photovoltaic(PV)power generation at Utrecht University to accurately predict PV system performance by identifying critical impact factors and improving renewable energy efficiency.To predict plant efficiency,nineteen variables are analyzed,consisting of nine indoor photovoltaic panel characteristics(Open Circuit Voltage(Voc),Short Circuit Current(Isc),Maximum Power(Pmpp),Maximum Voltage(Umpp),Maximum Current(Impp),Filling Factor(FF),Parallel Resistance(Rp),Series Resistance(Rs),Module Temperature)and ten environmental factors(Air Temperature,Air Humidity,Dew Point,Air Pressure,Irradiation,Irradiation Propagation,Wind Speed,Wind Speed Propagation,Wind Direction,Wind Direction Propagation).This study provides a new perspective not previously addressed in the literature.In this study,different machine learning methods such as Multilayer Perceptron(MLP),Multivariate Adaptive Regression Spline(MARS),Multiple Linear Regression(MLR),and Random Forest(RF)models are used to predict power values using data from installed PVpanels.Panel values obtained under real field conditions were used to train the models,and the results were compared.The Multilayer Perceptron(MLP)model was achieved with the highest classification accuracy of 0.990%.The machine learning models used for solar energy forecasting show high performance and produce results close to actual values.Models like Multi-Layer Perceptron(MLP)and Random Forest(RF)can be used in diverse locations based on load demand.展开更多
The auto-regressive moving-average (ARMA) model with time-varying parameters is analyzed. The time-varying parameters are assumed to be a linear combination of a set of basis time-varying functions, and the feedbac...The auto-regressive moving-average (ARMA) model with time-varying parameters is analyzed. The time-varying parameters are assumed to be a linear combination of a set of basis time-varying functions, and the feedback linear estimation algorithm is used to estimate the time-varying parameters of the ARMA model. This algorithm includes 2 linear least squares estimations and a linear filter. The influence of the order of basis time-(varying) functions on parameters estimation is analyzed. The method has the advantage of simple, saving computation time and storage space. Theoretical analysis and experimental results show the validity of this method.展开更多
The material of nickel aluminum bronze (NAB) presents superior properties such as high strength, excellent wear resistance and stress corrosion resistance and is extensively used for marine propellers. In order to est...The material of nickel aluminum bronze (NAB) presents superior properties such as high strength, excellent wear resistance and stress corrosion resistance and is extensively used for marine propellers. In order to establish the constitutive relation of NAB under high strain rate condition, a new methodology was proposed to accurately identify the constitutive parameters of Johnson?Cook model in machining, combining SHPB tests, predictive cutting force model and orthogonal cutting experiment. Firstly, SHPB tests were carried out to obtain the true stress?strain curves at various temperatures and strain rates. Then, an objective function of the predictive and experimental flow stresses was set up, which put the identified parameters of SHPB tests as the initial value, and utilized the PSO algorithm to identify the constitutive parameters of NAB in machining. Finally, the identified parameters were verified to be sufficiently accurate by comparing the values of cutting forces calculated from the predictive model and FEM simulation.展开更多
Lithium ion batteries are complicated distributed parameter systems that can be described preferably by partial differential equations and a field theory. To reduce the solution difficulty and the calculation amount, ...Lithium ion batteries are complicated distributed parameter systems that can be described preferably by partial differential equations and a field theory. To reduce the solution difficulty and the calculation amount, if a distributed parameter system is described by ordinary differential equations （ODE） during the analysis and the design of distributed parameter system, the reliability of the system description will be reduced, and the systemic errors will be introduced. Studies on working condition real-time monitoring can improve the security because the rechargeable LIBs are widely used in many electronic systems and electromechanical equipment. Single particle model （SPM） is the simplification of LIB under some approximations, and can estimate the working parameters of a LIB at the faster simulation speed. A LIB modelling algorithm based on PDEs and SPM is proposed to monitor the working condition of LIBs in real time. Although the lithium ion concentration is an unmeasurable distributed parameter in the anode of LIB, the working condition monitoring model can track the real time lithium ion concentration in the anode of LIB, and calculate the residual which is the difference between the ideal data and the measured data. A fault alarm can be triggered when the residual is beyond the preset threshold. A simulation example verifies that the effectiveness and the accuracy of the working condition real-time monitoring model of LIB based on PDEs and SPM.展开更多
The retrieval of the biomass parameters from active/passive microwave remote sensing data （10.2 GHz） is performed based on an iterative inversion of BP neural network model with fuzzy optimization. The BP neural net...The retrieval of the biomass parameters from active/passive microwave remote sensing data （10.2 GHz） is performed based on an iterative inversion of BP neural network model with fuzzy optimization. The BP neural network is trained by a set of the measurements of active and passive remote sensing and the ground truth data versus Day of Year during growth. Once the network training is complete, the model can be used to retrieve the temporal variations of the biomass parameters from another set of observation data. The model was used in weights and microware observation data of wheat growth in 1989 to retrieve biomass parameters change of wheat growth this year. The retrieved biomass parameters correspond well with the real data of the growth, which shows that the BP model is scientific and sound.展开更多
Based on the stochastic AMR model, this paper constructs man-made earthquake catalogues to investigate the property of parameter estimation of the model. Then the stochastic AMR model is applied to the study of severa...Based on the stochastic AMR model, this paper constructs man-made earthquake catalogues to investigate the property of parameter estimation of the model. Then the stochastic AMR model is applied to the study of several strong earthquakes in China and New Zealand. Akaikes AIC criterion is used to discriminate whether an accelerating mode of earthquake activity precedes those events or not. Finally, regional accelerating seismic activity and possible prediction approach for future strong earthquakes are discussed.展开更多
A novel parameter extraction method with rational functions is presented for the 2-πequivalent circuit model of RF CMOS spiral inductors. The final S-parameters simulated by the circuit model closely match experiment...A novel parameter extraction method with rational functions is presented for the 2-πequivalent circuit model of RF CMOS spiral inductors. The final S-parameters simulated by the circuit model closely match experimental data. The extraction strategy is straightforward and can be easily implemented as a CAD tool to model spiral inductors. The resulting circuit models will be very useful for RF circuit designers.展开更多
Within a theoretical ENSO model, the authors investigated whether or not the errors superimposed on model parameters could cause a significant ＂spring predictability barrier＂ （SPB） for El Nio events. First, sensit...Within a theoretical ENSO model, the authors investigated whether or not the errors superimposed on model parameters could cause a significant ＂spring predictability barrier＂ （SPB） for El Nio events. First, sensitivity experiments were respectively performed to the air-sea coupling parameter, α and the thermocline effect coefficient μ. The results showed that the uncertainties superimposed on each of the two parameters did not exhibit an obvious season-dependent evolution; furthermore, the uncertainties caused a very small prediction error and consequently failed to yield a significant SPB. Subsequently, the conditional nonlinear optimal perturbation （CNOP） approach was used to study the effect of the optimal mode （CNOP-P） of the uncertainties of the two parameters on the SPB and to demonstrate that the CNOP-P errors neither presented a unified season-dependent evolution for different El Nio events nor caused a large prediction error, and therefore did not cause a significant SPB. The parameter errors played only a trivial role in yielding a significant SPB. To further validate this conclusion, the authors investigated the effect of the optimal combined mode （i.e. CNOP error） of initial and model errors on SPB. The results illustrated that the CNOP errors tended to have a significant season-dependent evolution, with the largest error growth rate in the spring, and yielded a large prediction error, inducing a significant SPB. The inference, therefore, is that initial errors, rather than model parameter errors, may be the dominant source of uncertainties that cause a significant SPB for El Nio events. These results indicate that the ability to forecast ENSO could be greatly increased by improving the initialization of the forecast model.展开更多
基金supported in part by the National Key Research and Development Program of China(2021YFB2900501)in part by the Shaanxi Science and Technology Innovation Team(2023-CX-TD-03)+3 种基金in part by the Science and Technology Program of Shaanxi Province(2021GXLH-Z-038)in part by the Natural Science Foundation of Hunan Province(2023JJ40607 and 2023JJ50045)in part by the Scientific Research Foundation of Hunan Provincial Education Department(23B0713 and 24B0603)in part by the National Natural Science Foundation of China(62401371,62101275,and 62372070).
文摘(Quasi-)closed-form results for the statistical properties of unmanned aerial vehicle(UAV)airto-ground channels are derived for the first time using a novel spatial-vector-based method from a threedimensional(3-D)arbitrary-elevation one-cylinder model.The derived results include a closed-form expression for the space-time correlation function and some quasi-closed-form ones for the space-Doppler power spectrum density,the level crossing rate,and the average fading duration,which are shown to be the generalizations of those previously obtained from the two-dimensional(2-D)one-ring model and the 3-D low-elevation one-cylinder model for terrestrial mobile-to-mobile channels.The close agreements between the theoretical results and the simulations as well as the measurements validate the utility of the derived channel statistics.Based on the derived expressions,the impacts of some parameters on the channel characteristics are investigated in an effective,efficient,and explicable way,which leads to a general guideline on the manual parameter estimation from the measurement description.
基金funded by Princess Nourah bint Abdulrahman University Researchers Supporting Project number(PNURSP2025R442)Princess Nourah bint Abdulrahman University,Riyadh,Saudi Arabia.
文摘Accurate parameter extraction of photovoltaic(PV)models plays a critical role in enabling precise performance prediction,optimal system sizing,and effective operational control under diverse environmental conditions.While a wide range of metaheuristic optimisation techniques have been applied to this problem,many existing methods are hindered by slow convergence rates,susceptibility to premature stagnation,and reduced accuracy when applied to complex multi-diode PV configurations.These limitations can lead to suboptimal modelling,reducing the efficiency of PV system design and operation.In this work,we propose an enhanced hybrid optimisation approach,the modified Spider Wasp Optimization(mSWO)with Opposition-Based Learning algorithm,which integrates the exploration and exploitation capabilities of the Spider Wasp Optimization(SWO)metaheuristic with the diversityenhancing mechanism of Opposition-Based Learning(OBL).The hybridisation is designed to dynamically expand the search space coverage,avoid premature convergence,and improve both convergence speed and precision in highdimensional optimisation tasks.The mSWO algorithm is applied to three well-established PV configurations:the single diode model(SDM),the double diode model(DDM),and the triple diode model(TDM).Real experimental current-voltage(I-V)datasets from a commercial PV module under standard test conditions(STC)are used for evaluation.Comparative analysis is conducted against eighteen advanced metaheuristic algorithms,including BSDE,RLGBO,GWOCS,MFO,EO,TSA,and SCA.Performance metrics include minimum,mean,and maximum root mean square error(RMSE),standard deviation(SD),and convergence behaviour over 30 independent runs.The results reveal that mSWO consistently delivers superior accuracy and robustness across all PV models,achieving the lowest RMSE values of 0.000986022(SDM),0.000982884(DDM),and 0.000982529(TDM),with minimal SD values,indicating remarkable repeatability.Convergence analyses further show that mSWO reaches optimal solutions more rapidly and with fewer oscillations than all competing methods,with the performance gap widening as model complexity increases.These findings demonstrate that mSWO provides a scalable,computationally efficient,and highly reliable framework for PV parameter extraction.Its adaptability to models of growing complexity suggests strong potential for broader applications in renewable energy systems,including performance monitoring,fault detection,and intelligent control,thereby contributing to the optimisation of next-generation solar energy solutions.
文摘This paper presents an efficient model reduction technique for linear time-varying systems based on shifted Legendre polynomials.The approach constructs approximate low-rank decomposition factors of finite-time Gramians directly from the expansion coefficients of impulse responses.Leveraging these factors,we develop two model reduction algorithms that integrate the low-rank square root method with dominant subspace projection.Our method is computationally efficient and flexible,requiring only a few matrix-vector operations and a singular value decomposition of a low-dimensional matrix,thereby avoiding the need to solve differential Lyapunov equations.Numerical experiments confirm the effectiveness of the proposed approach.
基金supported by the Open Research Fund of Key Laboratory of Advanced Theory and Application in Statistics and Data Science(East China Normal University),Ministry of Educationsupported by the National Natural Scientific Foundation of China under Grant No.NSFC12131006the Scientific and Technological Innovation Project of China Academy of Chinese Medical Science under Grant No.CI2023C063YLL。
文摘This paper examines whether the parametric regression model is correctly specified for both source and target data and whether the regression pattern in the source domain aligns with that of the target domain.This evaluation is a critical prerequisite for applying model-based transfer learning methods under covariate shift assumptions.Traditional regression model checks and twosample regression tests are insufficient to address this issue.To overcome these limitations,the authors propose a novel adaptive-to-regression test statistic that is asymptotically distribution-free.Under the null hypothesis,the test follows a chi-square weak limit,preserving the significance level and enabling critical value determination without resampling techniques.Additionally,the authors systematically analyze the test's power performance,highlighting its sensitivity to different sub-local alternatives that deviate from the null hypothesis.Numerical studies,including simulations,assess finite-sample performance,and a real-world data example is provided for illustration.
基金funded by the 14th Five-Year Plan Major Science and Technology Project of CNOOC project number KJGG2021-0506.
文摘After a long period of water flooding development,the oilfield has entered the middle and high water cut stage.The physical properties of reservoirs are changed by water erosion,which directly impacts reservoir development.Conventional numerical reservoir simulation methodologies typically employ static assumptions for model construction,presuming invariant reservoir geological parameters throughout the development process while neglecting the reservoir’s temporal evolution characteristics.Although such simplifications reduce computational complexity,they introduce substantial descriptive inaccuracies.Therefore,this paper proposes a meshless numerical simulation method for reservoirs that considers time-varying characteristics.This method avoids the meshing in traditional numerical simulation methods.From the fluid flow perspective,the reservoir’s computational domain is discretized into a series of connection units.An influence domain with a certain radius centered on the nodes is selected,and one-dimensional connection units are established between the nodes to achieve the characterization of the flow topology structure of the reservoir.In order to reflect the dynamic evolution of the reservoir’s physical properties during the water injection development process,the time-varying characteristics are incorporated into the formula of the seepage characteristic parameters in the meshless calculation.The change relationship of the permeability under different surface fluxes is considered to update the calculated connection conductivity in real time.By combining with the seepage control equation for solution,a time-varying meshless numerical simulation method is formed.The results show that compared with the numerical simulationmethod of the connection elementmethod(CEM)that only considers static parameters,this method has higher simulation accuracy and can better simulate the real migration and distribution of oil and water in the reservoir.Thismethod improves the accuracy of reservoir numerical simulation and the development effect of oilfields,providing a scientific basis for optimizing the water injection strategy,adjusting the production plan,and extending the effective production cycle of the oilfield.
基金supported via funding from Prince Sattam Bin Abdulaziz University project number(PSAU/2025/R/1446).
文摘Promoting the high penetration of renewable energies like photovoltaic(PV)systems has become an urgent issue for expanding modern power grids and has accomplished several challenges compared to existing distribution grids.This study measures the effectiveness of the Puma optimizer(PO)algorithm in parameter estimation of PSC(perovskite solar cells)dynamic models with hysteresis consideration considering the electric field effects on operation.The models used in this study will incorporate hysteresis effects to capture the time-dependent behavior of PSCs accurately.The PO optimizes the proposed modified triple diode model(TDM)with a variable voltage capacitor and resistances(VVCARs)considering the hysteresis behavior.The suggested PO algorithm contrasts with other wellknown optimizers from the literature to demonstrate its superiority.The results emphasize that the PO realizes a lower RMSE(Root mean square errors),which proves its capability and efficacy in parameter extraction for the models.The statistical results emphasize the efficiency and supremacy of the proposed PO compared to the other well-known competing optimizers.The convergence rates show good,fast,and stable convergence rates with lower RMSE via PO compared to the other five competitive optimizers.Moreover,the lowermean realized via the PO optimizer is illustrated by the box plot for all optimizers.
基金supported by the Opening Fund of Key Laboratory of Geological Survey and Evaluation of Ministry of Education(No.GLAB 2024ZR03)the National Natural Science Foundation of China(No.42407248)+2 种基金the Guizhou Provincial Basic Research Program(Natural Science)(No.QKHJC-[2023]-YB066)the Key Laboratory of Smart Earth(No.KF2023YB04-02)the Fundamental Research Funds for the Central Universities。
文摘The constitutive model is essential for predicting the deformation and stability of rocksoil mass.The estimation of constitutive model parameters is a necessary and important task for the reliable characterization of mechanical behaviors.However,constitutive model parameters cannot be evaluated accurately with a limited amount of test data,resulting in uncertainty in the prediction of stress-strain curves.This paper proposes a Bayesian analysis framework to address this issue.It combines the Bayesian updating with the structural reliability and adaptive conditional sampling methods to assess the equation parameter of constitutive models.Based on the triaxial and ring shear tests on shear zone soils from the Huangtupo landslide,a statistical damage constitutive model and a critical state hypoplastic constitutive model were used to demonstrate the effectiveness of the proposed framework.Moreover,the parameter uncertainty effects of the damage constitutive model on landslide stability were investigated.Results show that reasonable assessments of the constitutive model parameter can be well realized.The variability of stress-strain curves is strongly related to the model prediction performance.The estimation uncertainty of constitutive model parameters should not be ignored for the landslide stability calculation.Our study provides a reference for uncertainty analysis and parameter assessment of the constitutive model.
基金National Natural Science Foundation of China (81973749 and 8143594)State Administration of Traditional Chinese Medicine High-level Chinese Medicine Key Discipline Construction Project (zyyzdxk-2023069)。
文摘Objective To develop an onset risk prediction nomogram for patients with homocysteine-type(H-type)hypertension(HTH)based on pulse diagram parameters to assist early clinical prediction and diagnosis of HTH.Methods Patients diagnosed with essential hypertension and admitted to Shanghai Shuguang Hospital Affiliated to Shanghai University of Traditional Chinese Medicine,Shang-hai Hospital of Traditional Chinese Medicine,and Shanghai Hospital of Integrated Tradition-al Chinese and Western Medicine from July 6th 2020 to June 16th 2021,and from August 11th 2023 to January 22nd 2024,were enrolled in this retrospective research.The baselines and clinical biochemical indicators of patients were collected.The SMART-I TCM pulse instru-ment was applied to gather pulse diagram parameters.Multivariate logistic regression was adopted to analyze the risk factors for HTH.RStudio was employed to construct the nomo-gram model,receiver operating characteristic(ROC)curve,and calibration curve(bootstrap self-sampling 200 times),and clinical decision curve were drawn to evaluate the model’s dis-crimination and clinical effectiveness.Results A total of 168 hospitalized patients with essential hypertension were selected and di-vided into non-HTH group(n=29)and HTH group(n=139).Compared with non-HTH group,HTH group had a lower body mass index(BMI),and higher proportions of male pa-tients and drinkers(P<0.05).The ventricular wall thickening(VWT)could not be deter-mined.The proportions of left common carotid intima-media wall thickness(LCCIMWT)and serum creatinine(SCR)were higher in HTH group(P<0.05).The pulse diagram parameter As was significantly higher,and H4/H1 and T1/T were lower in HTH group(P<0.05).Gender,al-cohol consumption,serum creatinine,and the pulse diagram parameter H4/H1 were identi-fied as independent risk factors for HTH(P<0.05).The nomogram’s area under the ROC curve(AUC)was 0.795[95%confidence interval(CI):(0.7066,0.8828)],with a specificity of 0.724 and sensitivity of 0.799.After 200 times repeated bootstrap self-samplings,the calibra-tion curve showed that the simulated curve fits well with the actual curve(x^(2)=9.5002,P=0.3019).The clinical decision curve indicated that the nomogram’s applicability was optimal when the threshold for predicting HTH was between 0.38 and 1.00.Conclusion The nomogram model could be valuable for predicting the onset risk of HTH and pulse diagram parameters can facilitate early screening and prevention of HTH.
基金supported by the National Key Research and Development Program of China(No.2023YFC3010400)。
文摘The complex geometrical features of mechanical components significantly influence contact interactions and system dynamics.However,directly modeling contact forces on surfaces with intricate geometries presents considerable challenges.This study focuses on the helically twisted wire rope-sheave contact and proposes a contact force model that incorporates complex geometric features through a parameter identification approach.The model's impact on contact forces and system dynamics is thoroughly investigated.Leveraging a point contact model and an elliptic integral approximation,a loss function is formulated using the finite element(FE)contact model results as the reference data.Geometric parameters are subsequently determined by optimizing this loss function via a genetic algorithm(GA).The findings reveal that the contact stiffness increases with the wire rope pitch length,the radius of principal curvature,and the elliptic eccentricity of the contact zone.The proposed contact force model is integrated into a rigid-flexible coupled dynamics model,developed by the absolute node coordinate formulation,to examine the effects of contact geometry on system dynamics.The results demonstrate that the variations in wire rope geometry alter the contact stiffness,which in turn affects dynamic rope tension through frictional energy dissipation.The enhanced model's predictions exhibit superior alignment with the experimental data,thereby validating the methodology.This approach provides new insights for deducing the contact geometry from kinetic parameters and monitoring the performance degradation of mechanical components.
基金supported by the National Natural Science Foundation of China(Grant Nos.62303197,62273214)the Natural Science Foundation of Shandong Province(ZR2024MFO18).
文摘Accurate and reliable photovoltaic(PV)modeling is crucial for the performance evaluation,control,and optimization of PV systems.However,existing methods for PV parameter identification often suffer from limitations in accuracy and efficiency.To address these challenges,we propose an adaptive multi-learning cooperation search algorithm(AMLCSA)for efficient identification of unknown parameters in PV models.AMLCSA is a novel algorithm inspired by teamwork behaviors in modern enterprises.It enhances the original cooperation search algorithm in two key aspects:(i)an adaptive multi-learning strategy that dynamically adjusts search ranges using adaptive weights,allowing better individuals to focus on local exploitation while guiding poorer individuals toward global exploration;and(ii)a chaotic grouping reflection strategy that introduces chaotic sequences to enhance population diversity and improve search performance.The effectiveness of AMLCSA is demonstrated on single-diode,double-diode,and three PV-module models.Simulation results show that AMLCSA offers significant advantages in convergence,accuracy,and stability compared to existing state-of-the-art algorithms.
基金supported by the National Natural Science Foundation of China (Grant Nos.12234016,12174317 for C.Wu,and 12474218 for R.Ma,Z.Fan,and T.Ma)Beijing Natural Science Foundation (Grant No.1242022 for R.Ma,Z.Fan,and T.Ma)the New Cornerstone Science Foundation。
文摘Recent discovery of high transition temperature superconductivity in La_(3)Ni_(2)O_(7) has sparked renewed theoretical and experimental interests in unconventional superconductivity. It is crucial to understand the influence of various factors on its superconductivity. By refining the determinant quantum Monte Carlo algorithm, we characterize the parameter dependence of the superconducting transition temperature within a bilayer Hubbard model, which is sign-problem-free at arbitrary filling. A striking feature of this model is its similarity to the bilayer nickelate-based superconductor La_(3)Ni_(2)O_(7), where superconductivity emerges from the bilayer NiO_(2) planes.We find that interlayer spin-exchange J is critical to interlayer pairing, and that on-site interaction U contributes negatively to superconductivity at low doping levels but positively at high doping levels. Our findings can provide a reference for the next step in theoretical research on nickelate-based superconductors.
文摘Accurate modeling and parameter estimation of sea clutter are fundamental for effective sea surface target detection.With the improvement of radar resolution,sea clutter exhibits a pronounced heavy-tailed characteristic,rendering traditional distribution models and parameter estimation methods less effective.To address this,this paper proposes a dual compound-Gaussian model with inverse Gaussian texture(CG-IG)distribution model and combines it with an improved Adam algorithm to introduce a method for parameter correction.This method effectively fits sea clutter with heavy-tailed characteristics.Experiments with real measured sea clutter data show that the dual CGIG distribution model,after parameter correction,accurately describes the heavy-tailed phenomenon in sea clutter amplitude distribution,and the overall mean square error of the distribution is reduced.
文摘This research investigates the influence of indoor and outdoor factors on photovoltaic(PV)power generation at Utrecht University to accurately predict PV system performance by identifying critical impact factors and improving renewable energy efficiency.To predict plant efficiency,nineteen variables are analyzed,consisting of nine indoor photovoltaic panel characteristics(Open Circuit Voltage(Voc),Short Circuit Current(Isc),Maximum Power(Pmpp),Maximum Voltage(Umpp),Maximum Current(Impp),Filling Factor(FF),Parallel Resistance(Rp),Series Resistance(Rs),Module Temperature)and ten environmental factors(Air Temperature,Air Humidity,Dew Point,Air Pressure,Irradiation,Irradiation Propagation,Wind Speed,Wind Speed Propagation,Wind Direction,Wind Direction Propagation).This study provides a new perspective not previously addressed in the literature.In this study,different machine learning methods such as Multilayer Perceptron(MLP),Multivariate Adaptive Regression Spline(MARS),Multiple Linear Regression(MLR),and Random Forest(RF)models are used to predict power values using data from installed PVpanels.Panel values obtained under real field conditions were used to train the models,and the results were compared.The Multilayer Perceptron(MLP)model was achieved with the highest classification accuracy of 0.990%.The machine learning models used for solar energy forecasting show high performance and produce results close to actual values.Models like Multi-Layer Perceptron(MLP)and Random Forest(RF)can be used in diverse locations based on load demand.
文摘The auto-regressive moving-average (ARMA) model with time-varying parameters is analyzed. The time-varying parameters are assumed to be a linear combination of a set of basis time-varying functions, and the feedback linear estimation algorithm is used to estimate the time-varying parameters of the ARMA model. This algorithm includes 2 linear least squares estimations and a linear filter. The influence of the order of basis time-(varying) functions on parameters estimation is analyzed. The method has the advantage of simple, saving computation time and storage space. Theoretical analysis and experimental results show the validity of this method.
基金Project(2014CB046704)supported by the National Basic Research Program of ChinaProject(2014BAB13B01)supported by the National Science and Technology Pillar Program of China
文摘The material of nickel aluminum bronze (NAB) presents superior properties such as high strength, excellent wear resistance and stress corrosion resistance and is extensively used for marine propellers. In order to establish the constitutive relation of NAB under high strain rate condition, a new methodology was proposed to accurately identify the constitutive parameters of Johnson?Cook model in machining, combining SHPB tests, predictive cutting force model and orthogonal cutting experiment. Firstly, SHPB tests were carried out to obtain the true stress?strain curves at various temperatures and strain rates. Then, an objective function of the predictive and experimental flow stresses was set up, which put the identified parameters of SHPB tests as the initial value, and utilized the PSO algorithm to identify the constitutive parameters of NAB in machining. Finally, the identified parameters were verified to be sufficiently accurate by comparing the values of cutting forces calculated from the predictive model and FEM simulation.
文摘Lithium ion batteries are complicated distributed parameter systems that can be described preferably by partial differential equations and a field theory. To reduce the solution difficulty and the calculation amount, if a distributed parameter system is described by ordinary differential equations （ODE） during the analysis and the design of distributed parameter system, the reliability of the system description will be reduced, and the systemic errors will be introduced. Studies on working condition real-time monitoring can improve the security because the rechargeable LIBs are widely used in many electronic systems and electromechanical equipment. Single particle model （SPM） is the simplification of LIB under some approximations, and can estimate the working parameters of a LIB at the faster simulation speed. A LIB modelling algorithm based on PDEs and SPM is proposed to monitor the working condition of LIBs in real time. Although the lithium ion concentration is an unmeasurable distributed parameter in the anode of LIB, the working condition monitoring model can track the real time lithium ion concentration in the anode of LIB, and calculate the residual which is the difference between the ideal data and the measured data. A fault alarm can be triggered when the residual is beyond the preset threshold. A simulation example verifies that the effectiveness and the accuracy of the working condition real-time monitoring model of LIB based on PDEs and SPM.
文摘The retrieval of the biomass parameters from active/passive microwave remote sensing data （10.2 GHz） is performed based on an iterative inversion of BP neural network model with fuzzy optimization. The BP neural network is trained by a set of the measurements of active and passive remote sensing and the ground truth data versus Day of Year during growth. Once the network training is complete, the model can be used to retrieve the temporal variations of the biomass parameters from another set of observation data. The model was used in weights and microware observation data of wheat growth in 1989 to retrieve biomass parameters change of wheat growth this year. The retrieved biomass parameters correspond well with the real data of the growth, which shows that the BP model is scientific and sound.
基金National Natural Science Foundation of China (4007401340134010)Chinese Joint Seismological Science Foundation (042002) and the project during the Tenth Five-year Plan.
文摘Based on the stochastic AMR model, this paper constructs man-made earthquake catalogues to investigate the property of parameter estimation of the model. Then the stochastic AMR model is applied to the study of several strong earthquakes in China and New Zealand. Akaikes AIC criterion is used to discriminate whether an accelerating mode of earthquake activity precedes those events or not. Finally, regional accelerating seismic activity and possible prediction approach for future strong earthquakes are discussed.
文摘A novel parameter extraction method with rational functions is presented for the 2-πequivalent circuit model of RF CMOS spiral inductors. The final S-parameters simulated by the circuit model closely match experimental data. The extraction strategy is straightforward and can be easily implemented as a CAD tool to model spiral inductors. The resulting circuit models will be very useful for RF circuit designers.
基金sponsored by the Knowl-edge Innovation Program of the Chinese Academy of Sciences (No. KZCX2-YW-QN203)the National Basic Re-search Program of China (No. 2007CB411800)the GYHY200906009 of the China Meteorological Administra-tion
文摘Within a theoretical ENSO model, the authors investigated whether or not the errors superimposed on model parameters could cause a significant ＂spring predictability barrier＂ （SPB） for El Nio events. First, sensitivity experiments were respectively performed to the air-sea coupling parameter, α and the thermocline effect coefficient μ. The results showed that the uncertainties superimposed on each of the two parameters did not exhibit an obvious season-dependent evolution; furthermore, the uncertainties caused a very small prediction error and consequently failed to yield a significant SPB. Subsequently, the conditional nonlinear optimal perturbation （CNOP） approach was used to study the effect of the optimal mode （CNOP-P） of the uncertainties of the two parameters on the SPB and to demonstrate that the CNOP-P errors neither presented a unified season-dependent evolution for different El Nio events nor caused a large prediction error, and therefore did not cause a significant SPB. The parameter errors played only a trivial role in yielding a significant SPB. To further validate this conclusion, the authors investigated the effect of the optimal combined mode （i.e. CNOP error） of initial and model errors on SPB. The results illustrated that the CNOP errors tended to have a significant season-dependent evolution, with the largest error growth rate in the spring, and yielded a large prediction error, inducing a significant SPB. The inference, therefore, is that initial errors, rather than model parameter errors, may be the dominant source of uncertainties that cause a significant SPB for El Nio events. These results indicate that the ability to forecast ENSO could be greatly increased by improving the initialization of the forecast model.
