A novel front-end circuit designed for PMT signals processing considering the solution of "Time Walk" correction is discussed in this paper. We are trying to apply the TOT (Time over Threshold) technique to ...A novel front-end circuit designed for PMT signals processing considering the solution of "Time Walk" correction is discussed in this paper. We are trying to apply the TOT (Time over Threshold) technique to our research. Different from traditional ways, where amplitude is measured, time width is measured for slew correction here, which takes the advantage of TDC. Expensive fast ADCs are abandoned and the whole time measurement electronics design becomes more effective and economical. Test boards have been developed and a convenient method is introduced to evaluate our TOT technique. Results have shown that a 10ps slew correction resolution is achieved throughout the amplitude range from -108mV to -2000mV for negative signals of both 5 ns leading and trailing edge with 10 ns 50%-50% pulse width.展开更多
为实现高能电子束发生轫致辐射产生的空间低强度脉冲X/γ射线的单粒子测量,本文基于近饱和放大时间过阈(time over threshold,TOT)技术,采用低带宽的运放和差分输出的甄别器,研制了一种用于硅光电倍增管(silicon photo-multiplier,SiPM...为实现高能电子束发生轫致辐射产生的空间低强度脉冲X/γ射线的单粒子测量,本文基于近饱和放大时间过阈(time over threshold,TOT)技术,采用低带宽的运放和差分输出的甄别器,研制了一种用于硅光电倍增管(silicon photo-multiplier,SiPM)的阵列型探测器全部通道读出的前端电子学系统。该系统能够获得能量、时间、强度等较为全面的物理信息,并在后端数字电路的FPGA内部通过脉宽和时间戳符合挑选出有效脉冲X/γ射线事件。本文详细介绍了前端电子学系统的设计方案、性能测试及功能验证等,并通过实验获得了低能区(50~200 keV)能量范围内的脉宽-能量谱和强度谱。测量结果表明:在低能区范围内,探测器阵列输出信号通过本文研制的前端电路处理后,脉宽和能量具有正相关关系,验证了脉冲X/γ射线有效事件识别的可行性;近饱和放大提高了定时精度,修正后可达800 ps。展开更多
High precision time measurement is required in the readout of the neutron wall and TOF walls in the external target experiment of the Cooling Storage Ring(CSR) project in the Heavy Ion Research Facility in Lanzhou(HIR...High precision time measurement is required in the readout of the neutron wall and TOF walls in the external target experiment of the Cooling Storage Ring(CSR) project in the Heavy Ion Research Facility in Lanzhou(HIRFL).Considering the time walk correction,both time and charge are measured in the readout electronics.In this 16-channel measurement module,time and charge information are digitized by TDCs at the same time based on the Time-Over-Threshold(TOT) method;meanwhile,by employing high-density ASIC chips,the electronics complexity is effectively reduced.Test results indicate that this module achieves a time resolution better than 25 ps and a charge resolution better than 5%over the input amplitude range from 50 mV to 3V.展开更多
Time measurement plays a crucial role for the purpose of particle identification in high energy physics experiments. With increasingly demanding physics goals and the development of electronics, modern time measuremen...Time measurement plays a crucial role for the purpose of particle identification in high energy physics experiments. With increasingly demanding physics goals and the development of electronics, modern time measurement systems need to meet the requirement of excellent resolution specification as well as high integrity. Based on Field Programmable Gate Arrays（FPGAs）, FPGA time-to-digital converters（TDCs） have become one of the most mature and prominent time measurement methods in recent years. For correcting the time-walk effect caused by leading timing, a time-over-threshold（TOT） measurement should be added to the FPGA TDC. TOT can be obtained by measuring the interval between the signal leading and trailing edges. Unfortunately, a traditional TDC can recognize only one kind of signal edge, the leading or the trailing. Generally, to measure the interval, two TDC channels need to be used at the same time, one for leading, the other for trailing. However, this method unavoidably increases the amount of FPGA resources used and reduces the TDC＇s integrity.This paper presents one method of TOT measurement implemented in a Xilinx Virtex-5 FPGA. In this method,TOT measurement can be achieved using only one TDC input channel. The consumed resources and time resolution can both be guaranteed. Testing shows that this TDC can achieve resolution better than 15 ps for leading edge measurement and 37 ps for TOT measurement. Furthermore, the TDC measurement dead time is about two clock cycles, which makes it good for applications with higher physics event rates.展开更多
A new charge measurement method, time over threshold （TOT）, has been used in some gas detectors lately. HereTOT is studied for TOF system, made of plastic scintillator counter, which can simplify the electronics of ...A new charge measurement method, time over threshold （TOT）, has been used in some gas detectors lately. HereTOT is studied for TOF system, made of plastic scintillator counter, which can simplify the electronics of the system. The signal characteristics are measured and analyzed with a high quality oscilloscope, including noise, pedestal, signal amplitude, total charge, rise time and the correlation between them. The TOT and charge are related and can be fitted by some empirical formula. The charge measurement resolution by TOT is given and this will help the design of TOF electronics.展开更多
基金Supported by National Natural Science Foundation of China (10405023)National Large-Scale Science Project BEPCII
文摘A novel front-end circuit designed for PMT signals processing considering the solution of "Time Walk" correction is discussed in this paper. We are trying to apply the TOT (Time over Threshold) technique to our research. Different from traditional ways, where amplitude is measured, time width is measured for slew correction here, which takes the advantage of TDC. Expensive fast ADCs are abandoned and the whole time measurement electronics design becomes more effective and economical. Test boards have been developed and a convenient method is introduced to evaluate our TOT technique. Results have shown that a 10ps slew correction resolution is achieved throughout the amplitude range from -108mV to -2000mV for negative signals of both 5 ns leading and trailing edge with 10 ns 50%-50% pulse width.
基金Supported by the Knowledge Innovation Program of the Chinese Academy of Sciences(No.KJCX2-YW-N27)the National Natural Science Foundation of China(No.11079003)
文摘High precision time measurement is required in the readout of the neutron wall and TOF walls in the external target experiment of the Cooling Storage Ring(CSR) project in the Heavy Ion Research Facility in Lanzhou(HIRFL).Considering the time walk correction,both time and charge are measured in the readout electronics.In this 16-channel measurement module,time and charge information are digitized by TDCs at the same time based on the Time-Over-Threshold(TOT) method;meanwhile,by employing high-density ASIC chips,the electronics complexity is effectively reduced.Test results indicate that this module achieves a time resolution better than 25 ps and a charge resolution better than 5%over the input amplitude range from 50 mV to 3V.
基金Supported by National Natural Science Foundation of China(11079003,10979003)
文摘Time measurement plays a crucial role for the purpose of particle identification in high energy physics experiments. With increasingly demanding physics goals and the development of electronics, modern time measurement systems need to meet the requirement of excellent resolution specification as well as high integrity. Based on Field Programmable Gate Arrays（FPGAs）, FPGA time-to-digital converters（TDCs） have become one of the most mature and prominent time measurement methods in recent years. For correcting the time-walk effect caused by leading timing, a time-over-threshold（TOT） measurement should be added to the FPGA TDC. TOT can be obtained by measuring the interval between the signal leading and trailing edges. Unfortunately, a traditional TDC can recognize only one kind of signal edge, the leading or the trailing. Generally, to measure the interval, two TDC channels need to be used at the same time, one for leading, the other for trailing. However, this method unavoidably increases the amount of FPGA resources used and reduces the TDC＇s integrity.This paper presents one method of TOT measurement implemented in a Xilinx Virtex-5 FPGA. In this method,TOT measurement can be achieved using only one TDC input channel. The consumed resources and time resolution can both be guaranteed. Testing shows that this TDC can achieve resolution better than 15 ps for leading edge measurement and 37 ps for TOT measurement. Furthermore, the TDC measurement dead time is about two clock cycles, which makes it good for applications with higher physics event rates.
基金Supported by BEPCⅡ Project,CAS Knowledge Innovation Program U602 and U-34(IHEP)
文摘A new charge measurement method, time over threshold （TOT）, has been used in some gas detectors lately. HereTOT is studied for TOF system, made of plastic scintillator counter, which can simplify the electronics of the system. The signal characteristics are measured and analyzed with a high quality oscilloscope, including noise, pedestal, signal amplitude, total charge, rise time and the correlation between them. The TOT and charge are related and can be fitted by some empirical formula. The charge measurement resolution by TOT is given and this will help the design of TOF electronics.
