A 1D finite element method in time domain is developed in this paper and applied to calculate in-plane wave motions of free field exited by SV or P wave oblique incidence in an elastic layered half-space. First, the l...A 1D finite element method in time domain is developed in this paper and applied to calculate in-plane wave motions of free field exited by SV or P wave oblique incidence in an elastic layered half-space. First, the layered half-space is discretized on the basis of the propagation characteristic of elastic wave according to the Snell law. Then, the finite element method with lumped mass and the central difference method are incorporated to establish 2D wave motion equations, which can be transformed into 1D equations by discretization principle and explicit finite element method. By solving the 1D equations, the displacements of nodes in any vertical line can be obtained, and the wave motions in layered half-space are finally determined based on the characteristic of traveling wave. Both the theoretical analysis and the numerical results demonstrate that the proposed method has high accuracy and good stability.展开更多
A time-domain method is applied to simulate nonlinear wave diffraction around a surface piercing 3-D arbitrary body. The method involves the application of Taylor series expansions and the use of perturbation procedur...A time-domain method is applied to simulate nonlinear wave diffraction around a surface piercing 3-D arbitrary body. The method involves the application of Taylor series expansions and the use of perturbation procedure to establish the corresponding boundary value problems with respect to a time-independent fluid domain. A boundary element method based on B-spline expansion is used to calculate the wave field at each time step, and the free surface boundary condition is satisfied to the second order of wave steepness by a numerical integration in time. An artificial damping layer is adopted on the free surface for the removal of wave reflection from the outer boundary. As an illustration, the method is used to compute the second-order wave forces and run-up on a surface-piercing circular cylinder. The present method is found to be accurate, computationally efficient, and numerically stable.展开更多
This paper investigates the phenomenon of three-pulse photon echo in thick rare-earth ions doped crystal whose thickness is far larger than 0.002 cm which is adopted in previous works.The influence of thickness on the...This paper investigates the phenomenon of three-pulse photon echo in thick rare-earth ions doped crystal whose thickness is far larger than 0.002 cm which is adopted in previous works.The influence of thickness on the three-pulse photon echo＇s amplitude and efficiency is analyzed with the Maxwell-Bloch equations solved by finite-difference timedomain method.We demonstrate that the amplitude of three-pulse echo will increase with the increasing of thickness and the optimum thickness to generate three-pulse photon echo is 0.3 cm for Tm^（3＋）：YAG when the attenuation of the input pulse is taken into account.Meanwhile,we find the expression 0.09 exp（α＇L）,which is previously employed to describe the relationship between echo＇s efficiency and thickness,should be modified as 1.3 · 0.09 exp（2.4 ·α＇L） with the propagation of echo considered.展开更多
The finite-difference time-domain method is used to simulate the optical characteristics of an in-plane switching blue phase liquid crystal display.Compared with the matrix optic methods and the refractive method,the ...The finite-difference time-domain method is used to simulate the optical characteristics of an in-plane switching blue phase liquid crystal display.Compared with the matrix optic methods and the refractive method,the finite-difference timedomain method,which is used to directly solve Maxwell＇s equations,can consider the lateral variation of the refractive index and obtain an accurate convergence effect.The simulation results show that e-rays and o-rays bend in different directions when the in-plane switching blue phase liquid crystal display is driven by the operating voltage.The finitedifference time-domain method should be used when the distribution of the liquid crystal in the liquid crystal display has a large lateral change.展开更多
Stochastic heat conduction and thermal stress analysis of structures has received considerable attention in recent years.The propagation of uncertain thermal environments will lead to stochastic variations in temperat...Stochastic heat conduction and thermal stress analysis of structures has received considerable attention in recent years.The propagation of uncertain thermal environments will lead to stochastic variations in temperature fields and thermal stresses.Therefore,it is reasonable to consider the variability of thermal environments while conducting thermal analysis.However,for ambient thermal excitations,only stationary random processes have been investigated thus far.In this study,the highly efficient explicit time-domain method(ETDM)is proposed for the analysis of non-stationary stochastic transient heat conduction and thermal stress problems.The explicit time-domain expressions of thermal responses are first constructed for a thermoelastic body.Then the statistical moments of thermal displacements and stresses can be directly obtained based on the explicit expressions of thermal responses.A numerical example involving non-stationary stochastic internal heat generation rate is investigated.The accuracy and efficiency of the proposed method are validated by comparison with the Monte-Carlo simulation.展开更多
The hydroelastic behavior of a moored oil storage vessel subjected to arbitrary time-dependent external loads,which include wind,waves,and currents with different incident directions,is investigated with the time-doma...The hydroelastic behavior of a moored oil storage vessel subjected to arbitrary time-dependent external loads,which include wind,waves,and currents with different incident directions,is investigated with the time-domain modal expansion method.First,the water boundary integral equations on the body surface of a quarter model,which can be obtained via the free-surface Green’s function method,are established.Then,the time-dependent elastic deflection of the moored oil storage vessel is expressed by a superposition of modal functions and corresponding modal amplitudes,and a Galerkin scheme is applied to derive the linear system of equations for the modal amplitudes.The second-order linear differential equations for modal amplitudes are solved via the fourth-order Runge−Kutta method.The present model is validated against existing frequency domain results for a truncated cylinder and a VLFS.Numerical calculations for the moored oil storage vessel are then conducted to obtain the time series of various modal amplitudes and elastic displacements of the measurement points and the corresponding spectra with different incident directions.展开更多
Based on conformal construction of physical model in a three-dimensional Cartesian grid,an integral-based conformal convolutional perfectly matched layer（CPML） is given for solving the truncation problem of the open...Based on conformal construction of physical model in a three-dimensional Cartesian grid,an integral-based conformal convolutional perfectly matched layer（CPML） is given for solving the truncation problem of the open port when the enlarged cell technique conformal finite-difference time-domain（ECT-CFDTD） method is used to simulate the wave propagation inside a perfect electric conductor（PEC） waveguide.The algorithm has the same numerical stability as the ECT-CFDTD method.For the long-time propagation problems of an evanescent wave in a waveguide,several numerical simulations are performed to analyze the reflection error by sweeping the constitutive parameters of the integral-based conformal CPML.Our numerical results show that the integral-based conformal CPML can be used to efficiently truncate the open port of the waveguide.展开更多
An efficient conformal locally one-dimensional finite-difference time-domain（LOD-CFDTD） method is presented for solving two-dimensional（2D） electromagnetic（EM） scattering problems. The formulation for the 2D tra...An efficient conformal locally one-dimensional finite-difference time-domain（LOD-CFDTD） method is presented for solving two-dimensional（2D） electromagnetic（EM） scattering problems. The formulation for the 2D transverse-electric（TE） case is presented and its stability property and numerical dispersion relationship are theoretically investigated. It is shown that the introduction of irregular grids will not damage the numerical stability. Instead of the staircasing approximation, the conformal scheme is only employed to model the curve boundaries, whereas the standard Yee grids are used for the remaining regions. As the irregular grids account for a very small percentage of the total space grids, the conformal scheme has little effect on the numerical dispersion. Moreover, the proposed method, which requires fewer arithmetic operations than the alternating-direction-implicit（ADI） CFDTD method, leads to a further reduction of the CPU time. With the total-field/scattered-field（TF/SF） boundary and the perfectly matched layer（PML）, the radar cross section（RCS） of two2 D structures is calculated. The numerical examples verify the accuracy and efficiency of the proposed method.展开更多
A conformal multi-resolution time-domain( CMRTD) method is presented for modeling curved objects. The effective dielectric constant and area weighting are used to derive the update equations of CMRTD. The backward sca...A conformal multi-resolution time-domain( CMRTD) method is presented for modeling curved objects. The effective dielectric constant and area weighting are used to derive the update equations of CMRTD. The backward scattering bistatic radar cross sections( RCS) of the dielectric cylinder and ellipsoid are used to validate the proposed method. The results show that the proposed conformal method is more accurate to deal with the complex curved objects in electromagnetic simulations.展开更多
An Improved Locally Conformal Finite-Difference Time-Domain (ILC-FDTD) method is presented in this paper, which is used to analyze the edge inclined slots penetrating adjacent broadwalls of a finite wall thickness wav...An Improved Locally Conformal Finite-Difference Time-Domain (ILC-FDTD) method is presented in this paper, which is used to analyze the edge inclined slots penetrating adjacent broadwalls of a finite wall thickness waveguide. ILC-FDTD not only removes tile instability of the original locally conformal FDTD algorithm, but also improves the computational accuracy by locally modifying magnetic field update equations and the virtual iterative electric fields accordlng to the complexity of tile slot fringe fields. The mutual coupling between two edge inclined slots can also be analyzed by ILC-FDTD effectively.展开更多
Several major challenges need to be faced for efficient transient multiscale electromagnetic simulations, such as flex- ible and robust geometric modeling schemes, efficient and stable time-stepping algorithms, etc. F...Several major challenges need to be faced for efficient transient multiscale electromagnetic simulations, such as flex- ible and robust geometric modeling schemes, efficient and stable time-stepping algorithms, etc. Fortunately, because of the versatile choices of spatial discretization and temporal integration, a discontinuous Galerkin time-domain （DGTD） method can be a very promising method of solving transient multiscale electromagnetic problems. In this paper, we present the application of a leap-frog DGTD method to the analyzing of the multiscale electromagnetic scattering problems. The uniaxial perfect matching layer （UPML） truncation of the computational domain is discussed and formulated in the leap-frog DGTD context. Numerical validations are performed in the challenging test cases demonstrating the accuracy and effectiveness of the method in solving transient multiscale electromagnetic problems compared with those of other numerical methods.展开更多
A conformal Runge-Kutta multi-resolution time-domain(C-RKMRTD)method is present and applied to model and analyze curved objects.Compared with the non-conformal method,the proposed method is more accurate.The scatterin...A conformal Runge-Kutta multi-resolution time-domain(C-RKMRTD)method is present and applied to model and analyze curved objects.Compared with the non-conformal method,the proposed method is more accurate.The scattering analyses of the cylinder and ellipsoid are presented to validate the proposed method.The numerical results demonstrate that the proposed scheme perform better than the MRTD method and other higher order methods with a higher accuracy.展开更多
Metallic ring-shaped nanotube arrays are proposed and its optical transmission properties are studied by using finite-difference time-domain （FDTD） method. Compared with the transmission spectra of conventional circ...Metallic ring-shaped nanotube arrays are proposed and its optical transmission properties are studied by using finite-difference time-domain （FDTD） method. Compared with the transmission spectra of conventional circular nanotube arrays, two photonic band gaps are emerged in the transmission spectra offing-shaped nanotube arrays, the two band gaps and transmission spectra are adjusted by the length, inner radius, intertube spacing and the dielectric constants of the core and embedding medium, and magnitude modification, redshift and blueshift of the resonance modes are observed. A metallic ring-shaped nanotube arrays for subwavelength band-stop filter in the range of visible light can be achieved. To understand its physical origin, field-interference mechanism was suggested by the field distributions. The proposed nanostructures and results may have great potential applications in subwavelength near-field optics.展开更多
The problem for calculating EM energy absorption by lossy dielectric scatterer ir-radiated by plane wave are discussed.The factors affecting the accuracy of computation arediscussed.The calculated results of EM energy...The problem for calculating EM energy absorption by lossy dielectric scatterer ir-radiated by plane wave are discussed.The factors affecting the accuracy of computation arediscussed.The calculated results of EM energy absorption and its distribution in homogeneousand layered homogenous lossy dielectric spheres are presented,and a comparison of these resultswith analytical solution is given.The calculation is carried out for dielectric cylinder on conduct-ing ground as well,and the results are compared with the image theory.All the computationsshew that the finite-difference time-domain method can give satisfactory results.展开更多
In this work,we develop a novel computational method,referred to as SCT-Z-FDTD,which integrates the Z-transform finite-difference time-domain algorithm with a scale-compressed technique incorporating wave vectors.The ...In this work,we develop a novel computational method,referred to as SCT-Z-FDTD,which integrates the Z-transform finite-difference time-domain algorithm with a scale-compressed technique incorporating wave vectors.The proposed approach fa-cilitates accurate modeling of electromagnetic wave propagation through multi-layered anisotropic media,enabling precise evalua-tion of reflection and refraction coefficients over short time intervals.On first place,considering constitutive relationship between electromagnetic fields(E,H)and fluxes(D,B),Z-transform is employed to the anisotropic Maxwell’s curl equations for completing discrete-time form,and then the transverse wave vectors are exploited along a single direction to design the electromagnetic numerical differential process.After that,with the analysis corresponding flow chart,the plane waves are employed with different modes such as transverse electromagnetic,transverse electric,and transverse magnetic to detect the specific propagation.To further verify lower memory and higher efficiency,we select various multi-layered examples with anisotropies for executing the proposed method.Compared with the popular commercial software COMSOL,those data from multi-layered computation are quite consistent with the approximate trend the 2nd-order error convergence.展开更多
In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to ...In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to obtain the maximal positive definite solution of nonlinear matrix equation X+A^(*)X|^(-α)A=Q with the case 0<α≤1.Based on this method,a new iterative algorithm is developed,and its convergence proof is given.Finally,two numerical examples are provided to show the effectiveness of the proposed method.展开更多
Convex feasibility problems are widely used in image reconstruction,sparse signal recovery,and other areas.This paper is devoted to considering a class of convex feasibility problem arising from sparse signal recovery...Convex feasibility problems are widely used in image reconstruction,sparse signal recovery,and other areas.This paper is devoted to considering a class of convex feasibility problem arising from sparse signal recovery.We rst derive the projection formulas for a vector onto the feasible sets.The centralized circumcentered-reection method is designed to solve the convex feasibility problem.Some numerical experiments demonstrate the feasibility and e ectiveness of the proposed algorithm,showing superior performance compared to conventional alternating projection methods.展开更多
Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The t...Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The traditional thermal elastic-plastic finite element method(TEP-FEM)can accurately predict welding deformation.However,its efficiency is low because of the complex nonlinear transient computation,making it difficult to meet the needs of rapid engineering evaluation.To address this challenge,this study proposes an efficient prediction method for welding deformation in marine thin plate butt welds.This method is based on the coupled temperature gradient-thermal strain method(TG-TSM)that integrates inherent strain theory with a shell element finite element model.The proposed method first extracts the distribution pattern and characteristic value of welding-induced inherent strain through TEP-FEM analysis.This strain is then converted into the equivalent thermal load applied to the shell element model for rapid computation.The proposed method-particularly,the gradual temperature gradient-thermal strain method(GTG-TSM)-achieved improved computational efficiency and consistent precision.Furthermore,the proposed method required much less computation time than the traditional TEP-FEM.Thus,this study lays the foundation for future prediction of welding deformation in more complex marine thin plates.展开更多
Guided waves are generally considered as a powerful approach for crack detection in structures,which are commonly investigated using the finite element method(FEM).However,the traditional FEM has many disadvantages in...Guided waves are generally considered as a powerful approach for crack detection in structures,which are commonly investigated using the finite element method(FEM).However,the traditional FEM has many disadvantages in solving wave propagation due to the strict requirement of mesh density.To tackle this issue,this paper proposes an efficient time-domain spectral finite element method(SFEM)to analyze wave propagation in cracked structures,in which the breathing crack is modeled by definiiig the spectral gap element.Moreover,novel orthogonal polynomials and Gauss-Lobatto-Legendre quadrature rules are adopted to construct the spectral element.Meanwhile,a separable hard contact is utilized to simulate the breathing behavior.Finally,a comparison of the numerical results between the FEM and the SFEM is conducted to demonstrate the high efficiency and accuracy of the proposed method.Based on the developed SFEM,the nonlinear features of waves and influence of the incident mode are also studied in detail,which provides a helpful guide for a physical understanding of the wave propagation behavior in structures with breathing cracks.展开更多
基金the National Natural Science Foundation of China(50478014)the National 973 Program(2007CB714200)the Beijing Natural Science Foundation(8061003).
文摘A 1D finite element method in time domain is developed in this paper and applied to calculate in-plane wave motions of free field exited by SV or P wave oblique incidence in an elastic layered half-space. First, the layered half-space is discretized on the basis of the propagation characteristic of elastic wave according to the Snell law. Then, the finite element method with lumped mass and the central difference method are incorporated to establish 2D wave motion equations, which can be transformed into 1D equations by discretization principle and explicit finite element method. By solving the 1D equations, the displacements of nodes in any vertical line can be obtained, and the wave motions in layered half-space are finally determined based on the characteristic of traveling wave. Both the theoretical analysis and the numerical results demonstrate that the proposed method has high accuracy and good stability.
基金The project was financially supported by the National Natural Science Foundation of China under the Grant No. 19732004 the National Science Fund for Distinguished Young Scholars under the Grant No. 50029002
文摘A time-domain method is applied to simulate nonlinear wave diffraction around a surface piercing 3-D arbitrary body. The method involves the application of Taylor series expansions and the use of perturbation procedure to establish the corresponding boundary value problems with respect to a time-independent fluid domain. A boundary element method based on B-spline expansion is used to calculate the wave field at each time step, and the free surface boundary condition is satisfied to the second order of wave steepness by a numerical integration in time. An artificial damping layer is adopted on the free surface for the removal of wave reflection from the outer boundary. As an illustration, the method is used to compute the second-order wave forces and run-up on a surface-piercing circular cylinder. The present method is found to be accurate, computationally efficient, and numerically stable.
基金Project supported by Tianjin Research Program Application Foundation and Advanced Technology,China(Grant No.15JCQNJC01100)
文摘This paper investigates the phenomenon of three-pulse photon echo in thick rare-earth ions doped crystal whose thickness is far larger than 0.002 cm which is adopted in previous works.The influence of thickness on the three-pulse photon echo＇s amplitude and efficiency is analyzed with the Maxwell-Bloch equations solved by finite-difference timedomain method.We demonstrate that the amplitude of three-pulse echo will increase with the increasing of thickness and the optimum thickness to generate three-pulse photon echo is 0.3 cm for Tm^（3＋）：YAG when the attenuation of the input pulse is taken into account.Meanwhile,we find the expression 0.09 exp（α＇L）,which is previously employed to describe the relationship between echo＇s efficiency and thickness,should be modified as 1.3 · 0.09 exp（2.4 ·α＇L） with the propagation of echo considered.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11304074,61475042,and 11274088)the Natural Science Foundation of Hebei Province,China(Grant Nos.A2015202320 and GCC2014048)the Key Subject Construction Project of Hebei Province University,China
文摘The finite-difference time-domain method is used to simulate the optical characteristics of an in-plane switching blue phase liquid crystal display.Compared with the matrix optic methods and the refractive method,the finite-difference timedomain method,which is used to directly solve Maxwell＇s equations,can consider the lateral variation of the refractive index and obtain an accurate convergence effect.The simulation results show that e-rays and o-rays bend in different directions when the in-plane switching blue phase liquid crystal display is driven by the operating voltage.The finitedifference time-domain method should be used when the distribution of the liquid crystal in the liquid crystal display has a large lateral change.
基金funded by the National Natural Science Foundation of China (51678252)the Guangzhou Science and Technology Project (201804020069)
文摘Stochastic heat conduction and thermal stress analysis of structures has received considerable attention in recent years.The propagation of uncertain thermal environments will lead to stochastic variations in temperature fields and thermal stresses.Therefore,it is reasonable to consider the variability of thermal environments while conducting thermal analysis.However,for ambient thermal excitations,only stationary random processes have been investigated thus far.In this study,the highly efficient explicit time-domain method(ETDM)is proposed for the analysis of non-stationary stochastic transient heat conduction and thermal stress problems.The explicit time-domain expressions of thermal responses are first constructed for a thermoelastic body.Then the statistical moments of thermal displacements and stresses can be directly obtained based on the explicit expressions of thermal responses.A numerical example involving non-stationary stochastic internal heat generation rate is investigated.The accuracy and efficiency of the proposed method are validated by comparison with the Monte-Carlo simulation.
基金Project supported by China Postdoctoral Science Foundation （20100481488）, Key Fund Project of Advanced Research of the Weapon Equipment （9140A33040512JB3401）.
基金financially supported by the Department of Natural Resources of Guangdong Province(Grant No.[2024]31)the National Natural Science Foundation of China(Grant No.52071145)+1 种基金the Natural Science Foundation of Guangdong Province,China(Grant No.2022B1515020071)the Fundamental Research Funds for the Central Universities(Grant No.2023ZYGXZR029).
文摘The hydroelastic behavior of a moored oil storage vessel subjected to arbitrary time-dependent external loads,which include wind,waves,and currents with different incident directions,is investigated with the time-domain modal expansion method.First,the water boundary integral equations on the body surface of a quarter model,which can be obtained via the free-surface Green’s function method,are established.Then,the time-dependent elastic deflection of the moored oil storage vessel is expressed by a superposition of modal functions and corresponding modal amplitudes,and a Galerkin scheme is applied to derive the linear system of equations for the modal amplitudes.The second-order linear differential equations for modal amplitudes are solved via the fourth-order Runge−Kutta method.The present model is validated against existing frequency domain results for a truncated cylinder and a VLFS.Numerical calculations for the moored oil storage vessel are then conducted to obtain the time series of various modal amplitudes and elastic displacements of the measurement points and the corresponding spectra with different incident directions.
基金supported by the National Natural Science Foundation of China(Grant No.61231003)
文摘Based on conformal construction of physical model in a three-dimensional Cartesian grid,an integral-based conformal convolutional perfectly matched layer（CPML） is given for solving the truncation problem of the open port when the enlarged cell technique conformal finite-difference time-domain（ECT-CFDTD） method is used to simulate the wave propagation inside a perfect electric conductor（PEC） waveguide.The algorithm has the same numerical stability as the ECT-CFDTD method.For the long-time propagation problems of an evanescent wave in a waveguide,several numerical simulations are performed to analyze the reflection error by sweeping the constitutive parameters of the integral-based conformal CPML.Our numerical results show that the integral-based conformal CPML can be used to efficiently truncate the open port of the waveguide.
基金supported by the National Natural Science Foundation of China(Grant Nos.61331007 and 61471105)
文摘An efficient conformal locally one-dimensional finite-difference time-domain（LOD-CFDTD） method is presented for solving two-dimensional（2D） electromagnetic（EM） scattering problems. The formulation for the 2D transverse-electric（TE） case is presented and its stability property and numerical dispersion relationship are theoretically investigated. It is shown that the introduction of irregular grids will not damage the numerical stability. Instead of the staircasing approximation, the conformal scheme is only employed to model the curve boundaries, whereas the standard Yee grids are used for the remaining regions. As the irregular grids account for a very small percentage of the total space grids, the conformal scheme has little effect on the numerical dispersion. Moreover, the proposed method, which requires fewer arithmetic operations than the alternating-direction-implicit（ADI） CFDTD method, leads to a further reduction of the CPU time. With the total-field/scattered-field（TF/SF） boundary and the perfectly matched layer（PML）, the radar cross section（RCS） of two2 D structures is calculated. The numerical examples verify the accuracy and efficiency of the proposed method.
基金Supported by the National Natural Science Foundation of China(61172024)the Funding of Jiangsu Innovation Program for Graduate Education and the Fundamental Research Funds for the Central Universities(CXZZ12-0156)
文摘A conformal multi-resolution time-domain( CMRTD) method is presented for modeling curved objects. The effective dielectric constant and area weighting are used to derive the update equations of CMRTD. The backward scattering bistatic radar cross sections( RCS) of the dielectric cylinder and ellipsoid are used to validate the proposed method. The results show that the proposed conformal method is more accurate to deal with the complex curved objects in electromagnetic simulations.
基金Supported by the National Natural Science Fbundation of China(No.69931030)
文摘An Improved Locally Conformal Finite-Difference Time-Domain (ILC-FDTD) method is presented in this paper, which is used to analyze the edge inclined slots penetrating adjacent broadwalls of a finite wall thickness waveguide. ILC-FDTD not only removes tile instability of the original locally conformal FDTD algorithm, but also improves the computational accuracy by locally modifying magnetic field update equations and the virtual iterative electric fields accordlng to the complexity of tile slot fringe fields. The mutual coupling between two edge inclined slots can also be analyzed by ILC-FDTD effectively.
基金supported by the National Natural Science Foundation of China(Grant Nos.61301056 and 11176007)the Sichuan Provincial Science and Technology Support Program,China(Grant No.2013HH0047)+1 种基金the Fok Ying Tung Education Foundation,China(Grant No.141062)the"111"Project,China(Grant No.B07046)
文摘Several major challenges need to be faced for efficient transient multiscale electromagnetic simulations, such as flex- ible and robust geometric modeling schemes, efficient and stable time-stepping algorithms, etc. Fortunately, because of the versatile choices of spatial discretization and temporal integration, a discontinuous Galerkin time-domain （DGTD） method can be a very promising method of solving transient multiscale electromagnetic problems. In this paper, we present the application of a leap-frog DGTD method to the analyzing of the multiscale electromagnetic scattering problems. The uniaxial perfect matching layer （UPML） truncation of the computational domain is discussed and formulated in the leap-frog DGTD context. Numerical validations are performed in the challenging test cases demonstrating the accuracy and effectiveness of the method in solving transient multiscale electromagnetic problems compared with those of other numerical methods.
基金Supported by the National Nature Science Foundation of China(61172024)the Funding of Jiangsu Innovation Program for Graduate Education and the Fundamental Research Funds for the Central Universities(CXZZ120156)the Postdoctoral Science Foundation of China(2013M531350)
文摘A conformal Runge-Kutta multi-resolution time-domain(C-RKMRTD)method is present and applied to model and analyze curved objects.Compared with the non-conformal method,the proposed method is more accurate.The scattering analyses of the cylinder and ellipsoid are presented to validate the proposed method.The numerical results demonstrate that the proposed scheme perform better than the MRTD method and other higher order methods with a higher accuracy.
基金Projects(11164007,61275174)supported by the National Natural Science Foundation of ChinaProject(20100162110068)supported by the Doctoral Program of Higher Education of China+1 种基金Project(20132BAB212007)supported by the Natural Science Foundation of Jiangxi Province,ChinaProject(GJJ11107)supported by Scientific Foundation of Jiangxi Education Department,China
文摘Metallic ring-shaped nanotube arrays are proposed and its optical transmission properties are studied by using finite-difference time-domain （FDTD） method. Compared with the transmission spectra of conventional circular nanotube arrays, two photonic band gaps are emerged in the transmission spectra offing-shaped nanotube arrays, the two band gaps and transmission spectra are adjusted by the length, inner radius, intertube spacing and the dielectric constants of the core and embedding medium, and magnitude modification, redshift and blueshift of the resonance modes are observed. A metallic ring-shaped nanotube arrays for subwavelength band-stop filter in the range of visible light can be achieved. To understand its physical origin, field-interference mechanism was suggested by the field distributions. The proposed nanostructures and results may have great potential applications in subwavelength near-field optics.
文摘The problem for calculating EM energy absorption by lossy dielectric scatterer ir-radiated by plane wave are discussed.The factors affecting the accuracy of computation arediscussed.The calculated results of EM energy absorption and its distribution in homogeneousand layered homogenous lossy dielectric spheres are presented,and a comparison of these resultswith analytical solution is given.The calculation is carried out for dielectric cylinder on conduct-ing ground as well,and the results are compared with the image theory.All the computationsshew that the finite-difference time-domain method can give satisfactory results.
基金supported by the National Natural Science Foundation of China(NSFC)(Grant No.62101333)the Program for Excellent Scientific and Innovation Research Team(Grant No.2022AH010002)the 2024 Anhui Province University Science and Engineering Teachers’Internship Program in Enterprises(Grant No.2024jsqygz02).
文摘In this work,we develop a novel computational method,referred to as SCT-Z-FDTD,which integrates the Z-transform finite-difference time-domain algorithm with a scale-compressed technique incorporating wave vectors.The proposed approach fa-cilitates accurate modeling of electromagnetic wave propagation through multi-layered anisotropic media,enabling precise evalua-tion of reflection and refraction coefficients over short time intervals.On first place,considering constitutive relationship between electromagnetic fields(E,H)and fluxes(D,B),Z-transform is employed to the anisotropic Maxwell’s curl equations for completing discrete-time form,and then the transverse wave vectors are exploited along a single direction to design the electromagnetic numerical differential process.After that,with the analysis corresponding flow chart,the plane waves are employed with different modes such as transverse electromagnetic,transverse electric,and transverse magnetic to detect the specific propagation.To further verify lower memory and higher efficiency,we select various multi-layered examples with anisotropies for executing the proposed method.Compared with the popular commercial software COMSOL,those data from multi-layered computation are quite consistent with the approximate trend the 2nd-order error convergence.
基金Supported in part by Natural Science Foundation of Guangxi(2023GXNSFAA026246)in part by the Central Government's Guide to Local Science and Technology Development Fund(GuikeZY23055044)in part by the National Natural Science Foundation of China(62363003)。
文摘In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to obtain the maximal positive definite solution of nonlinear matrix equation X+A^(*)X|^(-α)A=Q with the case 0<α≤1.Based on this method,a new iterative algorithm is developed,and its convergence proof is given.Finally,two numerical examples are provided to show the effectiveness of the proposed method.
基金Supported by the Natural Science Foundation of Guangxi Province(Grant Nos.2023GXNSFAA026067,2024GXN SFAA010521)the National Natural Science Foundation of China(Nos.12361079,12201149,12261026).
文摘Convex feasibility problems are widely used in image reconstruction,sparse signal recovery,and other areas.This paper is devoted to considering a class of convex feasibility problem arising from sparse signal recovery.We rst derive the projection formulas for a vector onto the feasible sets.The centralized circumcentered-reection method is designed to solve the convex feasibility problem.Some numerical experiments demonstrate the feasibility and e ectiveness of the proposed algorithm,showing superior performance compared to conventional alternating projection methods.
基金Supported by the National Natural Science Foundation of China under Grant No.51975138the High-Tech Ship Scientific Research Project from the Ministry of Industry and Information Technology under Grant No.CJ05N20the National Defense Basic Research Project under Grant No.JCKY2023604C006.
文摘Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The traditional thermal elastic-plastic finite element method(TEP-FEM)can accurately predict welding deformation.However,its efficiency is low because of the complex nonlinear transient computation,making it difficult to meet the needs of rapid engineering evaluation.To address this challenge,this study proposes an efficient prediction method for welding deformation in marine thin plate butt welds.This method is based on the coupled temperature gradient-thermal strain method(TG-TSM)that integrates inherent strain theory with a shell element finite element model.The proposed method first extracts the distribution pattern and characteristic value of welding-induced inherent strain through TEP-FEM analysis.This strain is then converted into the equivalent thermal load applied to the shell element model for rapid computation.The proposed method-particularly,the gradual temperature gradient-thermal strain method(GTG-TSM)-achieved improved computational efficiency and consistent precision.Furthermore,the proposed method required much less computation time than the traditional TEP-FEM.Thus,this study lays the foundation for future prediction of welding deformation in more complex marine thin plates.
基金the National Natural Sclenee Foundation of China(Grant No.51704222)China Pastdoctoral Science Foundation(Grant No.2018M633570)Fundamental Research Funds for the Cemtal Unveritiee(Grant No.3102017090004).
文摘Guided waves are generally considered as a powerful approach for crack detection in structures,which are commonly investigated using the finite element method(FEM).However,the traditional FEM has many disadvantages in solving wave propagation due to the strict requirement of mesh density.To tackle this issue,this paper proposes an efficient time-domain spectral finite element method(SFEM)to analyze wave propagation in cracked structures,in which the breathing crack is modeled by definiiig the spectral gap element.Moreover,novel orthogonal polynomials and Gauss-Lobatto-Legendre quadrature rules are adopted to construct the spectral element.Meanwhile,a separable hard contact is utilized to simulate the breathing behavior.Finally,a comparison of the numerical results between the FEM and the SFEM is conducted to demonstrate the high efficiency and accuracy of the proposed method.Based on the developed SFEM,the nonlinear features of waves and influence of the incident mode are also studied in detail,which provides a helpful guide for a physical understanding of the wave propagation behavior in structures with breathing cracks.
