A new approach for simultaneous online identification of unknown time delay and dynamic parameters of discrete-time delay systems is proposed in this paper.The proposed algorithm involves constructing a new generalize...A new approach for simultaneous online identification of unknown time delay and dynamic parameters of discrete-time delay systems is proposed in this paper.The proposed algorithm involves constructing a new generalized regression vector and defining the time delay and the rational dynamic parameters in the same vector.The gradient algorithm is used to deal with the identification problem.The effectiveness of this method is illustrated through simulation.展开更多
The control of time delay systems is still an open area for research. This paper proposes an enhanced model predictive discrete-time sliding mode control with a new sliding function for a linear system with state dela...The control of time delay systems is still an open area for research. This paper proposes an enhanced model predictive discrete-time sliding mode control with a new sliding function for a linear system with state delay. Firstly, a new sliding function including a present value and a past value of the state, called dynamic surface, is designed by means of linear matrix inequalities （LMIs）. Then, using this dynamic function and the rolling optimization method in the predictive control strategy, a discrete predictive sliding mode controller is synthesized. This new strategy is proposed to eliminate the undesirable effect of the delay term in the closed loop system. Also, the designed control strategy is more robust, and has a chattering reduction property and a faster convergence of the system s state. Finally, a numerical example is given to illustrate the effectiveness of the proposed control.展开更多
In an active control system, time delay will occur due to processes such as signal acquisition and transmission, calculation,and actuation. Time delay systems are usually described by delay differential equations（DDE...In an active control system, time delay will occur due to processes such as signal acquisition and transmission, calculation,and actuation. Time delay systems are usually described by delay differential equations（DDEs）. Since it is hard to obtain an analytical solution to a DDE, numerical solution is of necessity. This paper presents a frequency-domain method that uses a truncated transfer function to solve a class of DDEs. The theoretical transfer function is the sum of infinite items expressed in terms of poles and residues. The basic idea is to select the dominant poles and residues to truncate the transfer function,thus ensuring the validity of the solution while improving the efficiency of calculation. Meanwhile, the guideline of selecting these poles and residues is provided. Numerical simulations of both stable and unstable delayed systems are given to verify the proposed method, and the results are presented and analysed in detail.展开更多
A robust fault detection (RFD) scheme for a class of multi time delay system is proposed in this paper. A time delay unknown input observer (TDUIO) is adopted as the residual generator. The key stage of the TDUIO desi...A robust fault detection (RFD) scheme for a class of multi time delay system is proposed in this paper. A time delay unknown input observer (TDUIO) is adopted as the residual generator. The key stage of the TDUIO design is to find a coordinate change such that in the new coordinates all the time delay terms in the system description are associated with the output only. Then the TDUIO can be completed by the method for common unknown input observer. Thus, a robust residual signal for RFD is generated, which is sensitive to faults while robust against unknown input (disturbance). The proposed method has been verified by a numerical example.展开更多
The integrated optical true time delay phased array antenna system has the advantages of high bandwidth,small size,low loss and strong antiinterference capability,etc.The high integration of the optically controlled p...The integrated optical true time delay phased array antenna system has the advantages of high bandwidth,small size,low loss and strong antiinterference capability,etc.The high integration of the optically controlled phased array antenna system is a necessary trend for the future development of the phased array,and it is also a major focus and difficulty in the current research of integrated microwave photonics.This paper firstly introduces the basic principle and development history of optical true time delay phased array antenna system based on microwave photonics,and briefly introduces the main implementation methods and integration platform of optical true time delay.Then,the application and development prospect of optical true time delay technology in beam control of phased array antenna system are mainly presented.Finally,according to the current research progress,the possible research directions of integrated optically controlled phased array antenna systems in the future are proposed.展开更多
In this paper,a pair of dynamic high-gain observer and output feedback controller is proposed for nonlinear systems with multiple unknown time delays.By constructing Lyapunov-Krasovskii functionals,it shows that globa...In this paper,a pair of dynamic high-gain observer and output feedback controller is proposed for nonlinear systems with multiple unknown time delays.By constructing Lyapunov-Krasovskii functionals,it shows that global state asymptotic regulation can be ensured by introducing a single dynamic gain;furthermore,global asymptotic stabilization can be achieved by choosing a sufficiently large static scaling gain when the upper bounds of all system parameters are known.Especially,the output coefficient is allowed to be non-differentiable with unknown upper bound.This paper proposes a generalized Lyapunov matrix inequality based dynamic-gain scaling method,which significantly simplifies the design computational complexity by comparing with the classic backstepping method.展开更多
Incorporating asymmetric quadratic and cubic stiffnesses into a time-delayed Duffing oscillator provides a more accurate representation of practical systems,where the resulting nonlinearities critically influence subh...Incorporating asymmetric quadratic and cubic stiffnesses into a time-delayed Duffing oscillator provides a more accurate representation of practical systems,where the resulting nonlinearities critically influence subharmonic resonance phenomena,yet comprehensive investigations remain limited.This study employs the generalized harmonic balance(HB)method to conduct an analytical investigation of the subharmonic resonance behavior in asymmetric stiffness nonlinear systems with time delay.To further examine the switching behavior between primary and subharmonic resonances,a numerical continuation approach combining the shooting method and the parameter continuation algorithm is developed.The analytical and numerical continuation solutions are validated through direct numerical integration.Subsequently,the switching behavior and associated bifurcation points are analyzed by means of the numerical continuation results in conjunction with the Floquet theory.Finally,the effects of delay parameters on the existence range of subharmonic responses are discussed in detail,and the influence of initial conditions on system dynamics is explored with basin of attraction plots.This work establishes a comprehensive framework for the analytical and numerical study on time-delayed nonlinear systems with asymmetric stiffness,providing valuable theoretical insights into the stability management of such dynamic systems.展开更多
This paper studies global stabilization via predictor-based sampled-data output feedback for a class of feedforward nonlinear time-delay systems.Note that the traditional sampled-data observer via zero-order holder ma...This paper studies global stabilization via predictor-based sampled-data output feedback for a class of feedforward nonlinear time-delay systems.Note that the traditional sampled-data observer via zero-order holder may result in the performance degradation of the observer.In this paper,an improved predictor-based observer is designed to compensate for the influence of the unmeasurable states,sampling errors and output delay.In addition,a sampled-data output-feedback controller is also constructed using the gain scaling technique.By the Lyapunov-Krasovskii functional method,the global exponential stability of the resulting closed-loop system can be guaranteed under some sufficient conditions.The simulation results are provided to demonstrate the main results.展开更多
The problem of prescribed performance tracking control for unknown time-delay nonlinear systems subject to output constraints is dealt with in this paper. In contrast with related works, only the most fundamental requ...The problem of prescribed performance tracking control for unknown time-delay nonlinear systems subject to output constraints is dealt with in this paper. In contrast with related works, only the most fundamental requirements, i.e., boundedness and the local Lipschitz condition, are assumed for the allowable time delays. Moreover, we focus on the case where the reference is unknown beforehand, which renders the standard prescribed performance control designs under output constraints infeasible. To conquer these challenges, a novel robust prescribed performance control approach is put forward in this paper.Herein, a reverse tuning function is skillfully constructed and automatically generates a performance envelop for the tracking error. In addition, a unified performance analysis framework based on proof by contradiction and the barrier function is established to reveal the inherent robustness of the control system against the time delays. It turns out that the system output tracks the reference with a preassigned settling time and good accuracy,without constraint violations. A comparative simulation on a two-stage chemical reactor is carried out to illustrate the above theoretical findings.展开更多
This paper studies the bandgap characteristics of a locally resonant metamaterial beam with time delays.The dispersion relations are addressed based on transfer matrix method.The governing equations of motion of the b...This paper studies the bandgap characteristics of a locally resonant metamaterial beam with time delays.The dispersion relations are addressed based on transfer matrix method.The governing equations of motion of the beam in the frequency domain are given according to spectral element method.The amplitude-frequency responses of the forced beam are determined by solving linear algebraic equations.The obtained results show that the time-delayed feedback control has great relationships with the location,width and number of the bandgaps.It is interesting that the time delay can change the direction of the movement of the bandgap and give rise to the generation of multiple bandgaps.The influences of different combinations of control parameters on the bandgap properties are shown,such as broadening effects.展开更多
We experimentally analyze the effect of the optical power on the time delay signature identification and the random bit generation in chaotic semiconductor laser with optical feedback.Due to the inevitable noise durin...We experimentally analyze the effect of the optical power on the time delay signature identification and the random bit generation in chaotic semiconductor laser with optical feedback.Due to the inevitable noise during the photoelectric detection and analog-digital conversion,the varying of output optical power would change the signal to noise ratio,then impact time delay signature identification and the random bit generation.Our results show that,when the optical power is less than-14 dBm,with the decreasing of the optical power,the actual identified time delay signature degrades and the entropy of the chaotic signal increases.Moreover,the extracted random bit sequence with lower optical power is more easily pass through the randomness testing.展开更多
Considering the impact of time delay in the lateral stiffness of the primary suspension and stochastic disturbances of equivalent conicity on the wheelset system, a stochastic time-delayed wheelset system is establish...Considering the impact of time delay in the lateral stiffness of the primary suspension and stochastic disturbances of equivalent conicity on the wheelset system, a stochastic time-delayed wheelset system is established. The wheelset system is transformed into a onedimensional Ito stochastic differential equation using central manifold and stochastic averaging methods. The analysis of the system's stochastic stability is conducted through the maximum Lyapunov exponent and singular boundary theory. The combination of the stationary probability density method and numerical simulation is employed to discuss the types and conditions of stochastic P-bifurcation in the wheelset system. The results indicate that changes in speed and time delay induce stochastic P-bifurcations in the wheelset system, while changes in noise intensity do not lead to stochastic P-bifurcations. Both time delay and equivalent conicity affect the critical speed of the wheelset system, and the critical speed gradually increases with the decrease of time delay and equivalent conicity.展开更多
A study was conducted on the effect of time delay and structural parameters on the vibration reduction of a time delayed coupled negative stiffness dynamic absorber in nonlinear vibration reduction systems. Taking dyn...A study was conducted on the effect of time delay and structural parameters on the vibration reduction of a time delayed coupled negative stiffness dynamic absorber in nonlinear vibration reduction systems. Taking dynamic absorbers with different structural and control parameters as examples, the effects of third-order nonlinear coefficients, time-delay control parameters, and negative stiffness coefficients on reducing the replication of the main system were discussed. The nonlinear dynamic absorber has a very good vibration reduction effect at the resonance point of the main system and a nearby area, and when 1 increases to a certain level, the stable region of the system continues to increase. The amplitude curve of the main system of a nonlinear dynamic absorber will generate Hop bifurcation and saddle node bifurcation in the region far from the resonance point, resulting in almost periodic motion and jumping phenomena in the system. For nonlinear dynamic absorbers with determined structural parameters, time-delay feedback control can be adopted to control the amplitude of the main system. For different negative stiffness coefficients, there exists a minimum damping point for the amplitude of the main system under the determined system structural parameters and time-delay feedback control parameters.展开更多
This paper proposes an adaptive neural network control method for a class of perturbed strict-feedback nonlinear systems with unknown time delays. Radial basis function neural networks are used to approximate unknown ...This paper proposes an adaptive neural network control method for a class of perturbed strict-feedback nonlinear systems with unknown time delays. Radial basis function neural networks are used to approximate unknown intermediate control signals. By constructing appropriate Lyapunov-Krasovskii functionals, the unknown time delay terms have been compensated. Dynamic surface control technique is used to overcome the problem of ＂explosion of complexity＂ in backstepping design procedure. In addition, the semiglobal uniform ultimate boundedness of all the signals in the closed-loop system is proved. A main advantage of the proposed controller is that both problems of ＂curse of dimensionality＂ and ＂explosion of complexity＂ are avoided simultaneously. Finally, simulation results are presented to demonstrate the effectiveness of the approach.展开更多
This paper presents identification of second order plus dead time （SOPDT） integrating and critically damped systems based on relay feedback testing. Relay with hysteresis is applied to the unknown system to get the ...This paper presents identification of second order plus dead time （SOPDT） integrating and critically damped systems based on relay feedback testing. Relay with hysteresis is applied to the unknown system to get the sustained oscillations also called as limit cycle. The limit cycle parameters are utilized in mathematical expressions which are derived using state space technique so that exact process model parameters are estimated. As the relay with hysteresis helps in generating sustained oscillations and also reduces effect of measurement noise which is an important issue in system identification. Different types of processes in the form of transfer function models are considered to show the efficacy of the proposed method and results are compared with available methods in the literature with and without noise effect.展开更多
Offshore wind farms are becoming increasingly distant from onshore centralized control centers,and the communication delays between them inevitably introduce time delays in the measurement signal of the primary freque...Offshore wind farms are becoming increasingly distant from onshore centralized control centers,and the communication delays between them inevitably introduce time delays in the measurement signal of the primary frequency control.This causes a deterioration in the performance of the primary frequency control and,in some cases,may even result in frequency instability within the power system.Therefore,a frequency response model that incorporates communication delays was established for power systems that integrate offshore wind power.The Padéapproximation was used to model the time delays,and a linearized frequency response model of the power system was derived to investigate the frequency stability under different time delays.The influences of the wind power proportion and frequency control parameters on the system frequency stability were explored.In addition,a Smith delay compensation control strategy was devised to mitigate the effects of communication delays on the system frequency dynamics.Finally,a power system incorporating offshore wind power was constructed using the MATLAB/Simulink platform.The simulation results demonstrate the effectiveness and robustness of the proposed delay compensation control strategy.展开更多
During air injection into an oil reservoir,an oxidation reaction generates some heat to raise the reservoir temperature.When the reservoir temperature reaches an ignition temperature,spontaneous ignition occurs.There ...During air injection into an oil reservoir,an oxidation reaction generates some heat to raise the reservoir temperature.When the reservoir temperature reaches an ignition temperature,spontaneous ignition occurs.There is a time delay from the injection to ignition.There are mixed results regarding the feasibility of spontaneous ignition in real-field projects and in laboratory experiments.No analytical model is available in the literature to estimate the oxidation time required to reach spontaneous ignition with heat loss.This paper discusses the feasibility of spontaneous ignition from theoretical points and experimental and field project observations.An analytical model considering heat loss is proposed.Analytical models with and without heat loss investigate the factors that affect spontaneous ignition.Based on the discussion and investigations,we find that it is more difficult for spontaneous ignition to occur in laboratory experiments than in oil reservoirs;spontaneous ignition is strongly affected by the initial reservoir temperature,oil activity,and heat loss;spontaneous ignition is only possible when the initial reservoir temperature is high,the oil oxidation rate is high,and the heat loss is low.展开更多
An observer-based adaptive fuzzy control is presented for a class of nonlinear systems with unknown time delays. The state observer is first designed, and then the controller is designed via the adaptive fuzzy control...An observer-based adaptive fuzzy control is presented for a class of nonlinear systems with unknown time delays. The state observer is first designed, and then the controller is designed via the adaptive fuzzy control method based on the observed states. Both the designed observer and controller are independent of time delays. Using an appropriate Lyapunov-Krasovskii functional, the uncertainty of the unknown time delay is compensated, and then the fuzzy logic system in Mamdani type is utilized to approximate the unknown nonlinear functions. Based on the Lyapunov stability theory, the constructed observer-based controller and the closed-loop system are proved to be asymptotically stable. The designed control law is independent of the time delays and has a simple form with only one adaptive parameter vector, which is to be updated on-line. Simulation results are presented to demonstrate the effectiveness of the proposed approach.展开更多
A three-species ratio-dependent predator-prey diffusion model with time delays is investigated. It is shown that the system is uniformly persistent under some appropriate conditions, and sufficient conditions axe obta...A three-species ratio-dependent predator-prey diffusion model with time delays is investigated. It is shown that the system is uniformly persistent under some appropriate conditions, and sufficient conditions axe obtained for the global stability of the positive equilibrium of the system.展开更多
基金supported by Ministry of the Higher Education and Scientific Research in Tunisia
文摘A new approach for simultaneous online identification of unknown time delay and dynamic parameters of discrete-time delay systems is proposed in this paper.The proposed algorithm involves constructing a new generalized regression vector and defining the time delay and the rational dynamic parameters in the same vector.The gradient algorithm is used to deal with the identification problem.The effectiveness of this method is illustrated through simulation.
基金supported by Ministry of the Higher Education and Scientific Research in Tunisa
文摘The control of time delay systems is still an open area for research. This paper proposes an enhanced model predictive discrete-time sliding mode control with a new sliding function for a linear system with state delay. Firstly, a new sliding function including a present value and a past value of the state, called dynamic surface, is designed by means of linear matrix inequalities （LMIs）. Then, using this dynamic function and the rolling optimization method in the predictive control strategy, a discrete predictive sliding mode controller is synthesized. This new strategy is proposed to eliminate the undesirable effect of the delay term in the closed loop system. Also, the designed control strategy is more robust, and has a chattering reduction property and a faster convergence of the system s state. Finally, a numerical example is given to illustrate the effectiveness of the proposed control.
基金supported by the National Natural Science Foundation of China (11272235)
文摘In an active control system, time delay will occur due to processes such as signal acquisition and transmission, calculation,and actuation. Time delay systems are usually described by delay differential equations（DDEs）. Since it is hard to obtain an analytical solution to a DDE, numerical solution is of necessity. This paper presents a frequency-domain method that uses a truncated transfer function to solve a class of DDEs. The theoretical transfer function is the sum of infinite items expressed in terms of poles and residues. The basic idea is to select the dominant poles and residues to truncate the transfer function,thus ensuring the validity of the solution while improving the efficiency of calculation. Meanwhile, the guideline of selecting these poles and residues is provided. Numerical simulations of both stable and unstable delayed systems are given to verify the proposed method, and the results are presented and analysed in detail.
基金the National Natural Science Foundation of China (No. 60574081)
文摘A robust fault detection (RFD) scheme for a class of multi time delay system is proposed in this paper. A time delay unknown input observer (TDUIO) is adopted as the residual generator. The key stage of the TDUIO design is to find a coordinate change such that in the new coordinates all the time delay terms in the system description are associated with the output only. Then the TDUIO can be completed by the method for common unknown input observer. Thus, a robust residual signal for RFD is generated, which is sensitive to faults while robust against unknown input (disturbance). The proposed method has been verified by a numerical example.
基金supported by Fund of State Key Laboratory of IPOC(BUPT)(No.IPOC2021ZT16),China.
文摘The integrated optical true time delay phased array antenna system has the advantages of high bandwidth,small size,low loss and strong antiinterference capability,etc.The high integration of the optically controlled phased array antenna system is a necessary trend for the future development of the phased array,and it is also a major focus and difficulty in the current research of integrated microwave photonics.This paper firstly introduces the basic principle and development history of optical true time delay phased array antenna system based on microwave photonics,and briefly introduces the main implementation methods and integration platform of optical true time delay.Then,the application and development prospect of optical true time delay technology in beam control of phased array antenna system are mainly presented.Finally,according to the current research progress,the possible research directions of integrated optically controlled phased array antenna systems in the future are proposed.
基金supported by the Zhejiang Provincial Natural Science Foundation(LY24F030011,LY23F030005)the National Natural Science Foundation of China(62373131).
文摘In this paper,a pair of dynamic high-gain observer and output feedback controller is proposed for nonlinear systems with multiple unknown time delays.By constructing Lyapunov-Krasovskii functionals,it shows that global state asymptotic regulation can be ensured by introducing a single dynamic gain;furthermore,global asymptotic stabilization can be achieved by choosing a sufficiently large static scaling gain when the upper bounds of all system parameters are known.Especially,the output coefficient is allowed to be non-differentiable with unknown upper bound.This paper proposes a generalized Lyapunov matrix inequality based dynamic-gain scaling method,which significantly simplifies the design computational complexity by comparing with the classic backstepping method.
基金Project supported by the National Natural Science Foundation of China(Nos.U24B2062,520754285247051087)+1 种基金the Two-chain Fusion High-end Machine Tool Project of Shaanxi Province of China(No.2021LLRh-01-02)the Youth Fund of the National Natural Science Foundation of China(No.52205281)。
文摘Incorporating asymmetric quadratic and cubic stiffnesses into a time-delayed Duffing oscillator provides a more accurate representation of practical systems,where the resulting nonlinearities critically influence subharmonic resonance phenomena,yet comprehensive investigations remain limited.This study employs the generalized harmonic balance(HB)method to conduct an analytical investigation of the subharmonic resonance behavior in asymmetric stiffness nonlinear systems with time delay.To further examine the switching behavior between primary and subharmonic resonances,a numerical continuation approach combining the shooting method and the parameter continuation algorithm is developed.The analytical and numerical continuation solutions are validated through direct numerical integration.Subsequently,the switching behavior and associated bifurcation points are analyzed by means of the numerical continuation results in conjunction with the Floquet theory.Finally,the effects of delay parameters on the existence range of subharmonic responses are discussed in detail,and the influence of initial conditions on system dynamics is explored with basin of attraction plots.This work establishes a comprehensive framework for the analytical and numerical study on time-delayed nonlinear systems with asymmetric stiffness,providing valuable theoretical insights into the stability management of such dynamic systems.
基金supported by the Autonomous Innovation Team Foundation for“20 Items of the New University”of Jinan City(202228087)the National Natural Science Foundation of China(62073190).
文摘This paper studies global stabilization via predictor-based sampled-data output feedback for a class of feedforward nonlinear time-delay systems.Note that the traditional sampled-data observer via zero-order holder may result in the performance degradation of the observer.In this paper,an improved predictor-based observer is designed to compensate for the influence of the unmeasurable states,sampling errors and output delay.In addition,a sampled-data output-feedback controller is also constructed using the gain scaling technique.By the Lyapunov-Krasovskii functional method,the global exponential stability of the resulting closed-loop system can be guaranteed under some sufficient conditions.The simulation results are provided to demonstrate the main results.
基金supported in part by the National Natural Science Foundation of China (62103093)the National Key Research and Development Program of China (2022YFB3305905)+6 种基金the Xingliao Talent Program of Liaoning Province of China (XLYC2203130)the Fundamental Research Funds for the Central Universities of China (N2108003)the Natural Science Foundation of Liaoning Province (2023-MS-087)the BNU Talent Seed Fund,UIC Start-Up Fund (R72021115)the Guangdong Key Laboratory of AI and MM Data Processing (2020KSYS007)the Guangdong Provincial Key Laboratory IRADS for Data Science (2022B1212010006)the Guangdong Higher Education Upgrading Plan 2021–2025 of “Rushing to the Top,Making Up Shortcomings and Strengthening Special Features” with UIC Research,China (R0400001-22,R0400025-21)。
文摘The problem of prescribed performance tracking control for unknown time-delay nonlinear systems subject to output constraints is dealt with in this paper. In contrast with related works, only the most fundamental requirements, i.e., boundedness and the local Lipschitz condition, are assumed for the allowable time delays. Moreover, we focus on the case where the reference is unknown beforehand, which renders the standard prescribed performance control designs under output constraints infeasible. To conquer these challenges, a novel robust prescribed performance control approach is put forward in this paper.Herein, a reverse tuning function is skillfully constructed and automatically generates a performance envelop for the tracking error. In addition, a unified performance analysis framework based on proof by contradiction and the barrier function is established to reveal the inherent robustness of the control system against the time delays. It turns out that the system output tracks the reference with a preassigned settling time and good accuracy,without constraint violations. A comparative simulation on a two-stage chemical reactor is carried out to illustrate the above theoretical findings.
文摘This paper studies the bandgap characteristics of a locally resonant metamaterial beam with time delays.The dispersion relations are addressed based on transfer matrix method.The governing equations of motion of the beam in the frequency domain are given according to spectral element method.The amplitude-frequency responses of the forced beam are determined by solving linear algebraic equations.The obtained results show that the time-delayed feedback control has great relationships with the location,width and number of the bandgaps.It is interesting that the time delay can change the direction of the movement of the bandgap and give rise to the generation of multiple bandgaps.The influences of different combinations of control parameters on the bandgap properties are shown,such as broadening effects.
基金Project supported in part by the National Natural Science Foundation of China(Grant Nos.62005129 and 62175116)。
文摘We experimentally analyze the effect of the optical power on the time delay signature identification and the random bit generation in chaotic semiconductor laser with optical feedback.Due to the inevitable noise during the photoelectric detection and analog-digital conversion,the varying of output optical power would change the signal to noise ratio,then impact time delay signature identification and the random bit generation.Our results show that,when the optical power is less than-14 dBm,with the decreasing of the optical power,the actual identified time delay signature degrades and the entropy of the chaotic signal increases.Moreover,the extracted random bit sequence with lower optical power is more easily pass through the randomness testing.
基金Supported by the National Natural Science Foundation of China (61863022)the Key Project of Gansu Province Natural Science Foundation(23JRRA882)。
文摘Considering the impact of time delay in the lateral stiffness of the primary suspension and stochastic disturbances of equivalent conicity on the wheelset system, a stochastic time-delayed wheelset system is established. The wheelset system is transformed into a onedimensional Ito stochastic differential equation using central manifold and stochastic averaging methods. The analysis of the system's stochastic stability is conducted through the maximum Lyapunov exponent and singular boundary theory. The combination of the stationary probability density method and numerical simulation is employed to discuss the types and conditions of stochastic P-bifurcation in the wheelset system. The results indicate that changes in speed and time delay induce stochastic P-bifurcations in the wheelset system, while changes in noise intensity do not lead to stochastic P-bifurcations. Both time delay and equivalent conicity affect the critical speed of the wheelset system, and the critical speed gradually increases with the decrease of time delay and equivalent conicity.
文摘A study was conducted on the effect of time delay and structural parameters on the vibration reduction of a time delayed coupled negative stiffness dynamic absorber in nonlinear vibration reduction systems. Taking dynamic absorbers with different structural and control parameters as examples, the effects of third-order nonlinear coefficients, time-delay control parameters, and negative stiffness coefficients on reducing the replication of the main system were discussed. The nonlinear dynamic absorber has a very good vibration reduction effect at the resonance point of the main system and a nearby area, and when 1 increases to a certain level, the stable region of the system continues to increase. The amplitude curve of the main system of a nonlinear dynamic absorber will generate Hop bifurcation and saddle node bifurcation in the region far from the resonance point, resulting in almost periodic motion and jumping phenomena in the system. For nonlinear dynamic absorbers with determined structural parameters, time-delay feedback control can be adopted to control the amplitude of the main system. For different negative stiffness coefficients, there exists a minimum damping point for the amplitude of the main system under the determined system structural parameters and time-delay feedback control parameters.
文摘This paper proposes an adaptive neural network control method for a class of perturbed strict-feedback nonlinear systems with unknown time delays. Radial basis function neural networks are used to approximate unknown intermediate control signals. By constructing appropriate Lyapunov-Krasovskii functionals, the unknown time delay terms have been compensated. Dynamic surface control technique is used to overcome the problem of ＂explosion of complexity＂ in backstepping design procedure. In addition, the semiglobal uniform ultimate boundedness of all the signals in the closed-loop system is proved. A main advantage of the proposed controller is that both problems of ＂curse of dimensionality＂ and ＂explosion of complexity＂ are avoided simultaneously. Finally, simulation results are presented to demonstrate the effectiveness of the approach.
基金I am highly grateful to PES Institute of Technology, Bangalore South Campus, Karnataka, India for deputing me to study at Indian Institute of Technology Guwahati (IITG), a prestigious institute in India and providing me with financial assistance
文摘This paper presents identification of second order plus dead time （SOPDT） integrating and critically damped systems based on relay feedback testing. Relay with hysteresis is applied to the unknown system to get the sustained oscillations also called as limit cycle. The limit cycle parameters are utilized in mathematical expressions which are derived using state space technique so that exact process model parameters are estimated. As the relay with hysteresis helps in generating sustained oscillations and also reduces effect of measurement noise which is an important issue in system identification. Different types of processes in the form of transfer function models are considered to show the efficacy of the proposed method and results are compared with available methods in the literature with and without noise effect.
基金the support of the National Natural Science Foundation of China(52077061)Fundamental Research Funds for the Central Universities(B240201121).
文摘Offshore wind farms are becoming increasingly distant from onshore centralized control centers,and the communication delays between them inevitably introduce time delays in the measurement signal of the primary frequency control.This causes a deterioration in the performance of the primary frequency control and,in some cases,may even result in frequency instability within the power system.Therefore,a frequency response model that incorporates communication delays was established for power systems that integrate offshore wind power.The Padéapproximation was used to model the time delays,and a linearized frequency response model of the power system was derived to investigate the frequency stability under different time delays.The influences of the wind power proportion and frequency control parameters on the system frequency stability were explored.In addition,a Smith delay compensation control strategy was devised to mitigate the effects of communication delays on the system frequency dynamics.Finally,a power system incorporating offshore wind power was constructed using the MATLAB/Simulink platform.The simulation results demonstrate the effectiveness and robustness of the proposed delay compensation control strategy.
基金supported by the National Natural Science Foundation of China (No.51974334)Hainan Province Science and Technology Special Fund (ZDYF2022SHFZ107)local efficient reform and development funds for personnel training projects supported by the central government,Heilongjiang Postdoctoral Scientific Research Fund (LBH-Q21012)。
文摘During air injection into an oil reservoir,an oxidation reaction generates some heat to raise the reservoir temperature.When the reservoir temperature reaches an ignition temperature,spontaneous ignition occurs.There is a time delay from the injection to ignition.There are mixed results regarding the feasibility of spontaneous ignition in real-field projects and in laboratory experiments.No analytical model is available in the literature to estimate the oxidation time required to reach spontaneous ignition with heat loss.This paper discusses the feasibility of spontaneous ignition from theoretical points and experimental and field project observations.An analytical model considering heat loss is proposed.Analytical models with and without heat loss investigate the factors that affect spontaneous ignition.Based on the discussion and investigations,we find that it is more difficult for spontaneous ignition to occur in laboratory experiments than in oil reservoirs;spontaneous ignition is strongly affected by the initial reservoir temperature,oil activity,and heat loss;spontaneous ignition is only possible when the initial reservoir temperature is high,the oil oxidation rate is high,and the heat loss is low.
文摘An observer-based adaptive fuzzy control is presented for a class of nonlinear systems with unknown time delays. The state observer is first designed, and then the controller is designed via the adaptive fuzzy control method based on the observed states. Both the designed observer and controller are independent of time delays. Using an appropriate Lyapunov-Krasovskii functional, the uncertainty of the unknown time delay is compensated, and then the fuzzy logic system in Mamdani type is utilized to approximate the unknown nonlinear functions. Based on the Lyapunov stability theory, the constructed observer-based controller and the closed-loop system are proved to be asymptotically stable. The designed control law is independent of the time delays and has a simple form with only one adaptive parameter vector, which is to be updated on-line. Simulation results are presented to demonstrate the effectiveness of the proposed approach.
文摘A three-species ratio-dependent predator-prey diffusion model with time delays is investigated. It is shown that the system is uniformly persistent under some appropriate conditions, and sufficient conditions axe obtained for the global stability of the positive equilibrium of the system.
