This study addresses the challenge of directly determining the elastic modulus of complex shaped ceramic products—such as gas turbine combustor tiles—using conventional standardized methods,which are limited by spec...This study addresses the challenge of directly determining the elastic modulus of complex shaped ceramic products—such as gas turbine combustor tiles—using conventional standardized methods,which are limited by specimen geometry.A rapid,non-destructive testing method based on the impulse excitation technique(IET)and a shape factor coefficient was proposed.Three types of shaped ceramic tiles were selected.The elastic modulus of standard rectangular specimens obtained by destructive sampling was used as the reference value,and the shape factor coefficient for each tile type was calibrated by combining the mass and fundamental frequency of the whole tile.Using this coefficient,the elastic modulus of whole tiles was calculated solely from non-destructively measured mass and frequency.The results show that the deviation between the elastic modulus derived from the proposed method and that from destructive testing is less than 5%,confirming the accuracy and reliability of the approach.The method overcomes the shape restrictions inherent in traditional testing,offering a fast,non-destructive solution suitable for onsite quality assessment and process control during the production of shaped ceramic components.展开更多
To better guide the coating process of rectangular tiles on a ship hull, a computerized three-dimensional design method is proposed. Research was done on a tile generating algorithm, tile laying design flow, tiles gap...To better guide the coating process of rectangular tiles on a ship hull, a computerized three-dimensional design method is proposed. Research was done on a tile generating algorithm, tile laying design flow, tiles gap examination algorithm, and tiles slight displacement, as well as cutting and rotating algorithms.A three-dimensional design system was developed using an MDT platform. The application of this system indicates that using the design arrangement to coat tiles on a ship’s hull can result in enhanced coating quality.展开更多
SimWall is a user-friendly, stereo tiled display wall system composed of 18 commodity projectors operated by a Linux graphics cluster. Collaborating together, these projectors work as a single logical display capable ...SimWall is a user-friendly, stereo tiled display wall system composed of 18 commodity projectors operated by a Linux graphics cluster. Collaborating together, these projectors work as a single logical display capable of giving a high-resolution show, large-scale, and passive stereo scene. In order to avoid tedious system setup and maintenance, software-based automatic geometry and photometric calibration are used. The software calibration is integrated to the system seamlessly by an on-card transform method and is transparent to users. To end-users, SimWall works just as a common PC, but provides super computing, rendering and displaying ability. In addition, SimWall has stereoscopic function that gives users a semi-immersive experience in polarized passive way. This paper presents system architecture, implementation, and other technical issues such as hardware constraints, projectors alignment, geometry and photometric calibration, implementation of passive stereo, and development of overall soft- ware environment.展开更多
In this paper, a scalable hardware and software architecture for tiled display systems (a.k.a. videowalls), which can be implemented by using low-cost devices, together with a dynamic web-based management and configur...In this paper, a scalable hardware and software architecture for tiled display systems (a.k.a. videowalls), which can be implemented by using low-cost devices, together with a dynamic web-based management and configuration service are proposed. It has been designed to support both stored and live broadcast/broadband content, in mosaic or warp distributions. The displays and devices can be dynamically configured via web in different ways: the displays can create a single display of a larger size;or they can be configured in a customized way in order to playout different media contents in different display combinations. As display renderers, low-cost devices are proposed as the main hardware element to obtain affordable videowall systems. As a proof of concept, two prototypes have been implemented, including an accurate synchronization mechanism based on a Master/Slave control scheme and aggressive and smooth playout adjustment techniques. To evidence the good performance of the prototypes and configuration service, both objective and subjective evaluations have been conducted regarding synchronization accuracy and usability. On the one hand, the mean values of the asynchronies between the video playout processes in each display are kept below 25ms (i.e., frame accuracy). On the other hand, the obtained usability score in the System Usability Scale (SUS) test has been 88.65, which is considered as excellent.展开更多
We have developed a web-based processing system that can simulate positive and negative sea level changes globally by selecting the best Digital Elevation Model (DEM) for a target region from multiple DEMs. A PNG elev...We have developed a web-based processing system that can simulate positive and negative sea level changes globally by selecting the best Digital Elevation Model (DEM) for a target region from multiple DEMs. A PNG elevation tile format is used as the DEM format, which reduces the DEM data size. The PNG tile format implements client-based processing, and the DEM data are provided from different websites. In addition, the smart tile architecture is adopted, which enables on-demand simulation by adding a tile conversion process (<em>i.e.</em>, a DEM selection process) during image drawing by using JavaScript. To demonstrate the system, we have employed three DEMs,<em> i.e.</em>, the Geospatial Information Authority of Japan (GSI) map (~10-m resolution), the ASTER Global Digital Elevation Models (ASTER GDEM version 3) as global land area (~30-m resolution), and the General Bathymetric Chart of the Oceans as bathymetric data (~1000-m resolution). The ASTER Global Water Bodies Database is also used in the data selection process. The GSI provides their DEM in a PNG elevation tile format, and the other data are provided by the Geological Survey of Japan in PNG elevation tile format. We assume the current DEM sea level as 0 m, and the sea level can be changed to an arbitrary integer value (<span style="white-space:nowrap;">−</span>10,000 to 10,000 m). Combining ASTER GDEM for land and GEBCO for sea makes it possible to target DEM of the whole earth. Moreover, it was shown that if a higher resolution DEM is available, it is possible to combine the higher resolution DEM in that area. The combining the PNG elevation tile format with the smart tile architecture demonstrates the possibilities of a client-based web processing service like that of the server-based OGC Web Processing Service.展开更多
目的：回顾性分析 Tile C 型骨盆骨折患者死亡相关的危险因素。方法2010年1月至2014年12月我院收治的 Tile C 型骨盆骨折患者139例,收集资料包括术前一般情况、伤后就诊时间、休克指数、各类创伤评分、最低氧合指数、伤后6 h 乳酸清除率...目的：回顾性分析 Tile C 型骨盆骨折患者死亡相关的危险因素。方法2010年1月至2014年12月我院收治的 Tile C 型骨盆骨折患者139例,收集资料包括术前一般情况、伤后就诊时间、休克指数、各类创伤评分、最低氧合指数、伤后6 h 乳酸清除率等,采用多因素 Logistic 回归分析死亡相关危险因素。结果入院后死亡41例（29.5%）,其中入院后48 h 内死亡36例（25.9%）。多因素回归分析显示,休克指数＆gt;2（OR=2.591,95%CI 1.041~4.216）、损伤严重程度评分（ISS）≥25分（OR=47.96,95%CI 15.89~147.23）、改良创伤评分（RTS）≤8分（OR=6.917,95%CI 1.147-13.862）、格拉斯哥昏迷评分（GCS）〈9分（OR=4.172,95%CI 2.962~6.268）、最低氧合指数〈200（OR=117.016,95%CI 51.011~176.032）、伤后6 h 乳酸清除率〈10%（OR=2.785,95%CI 1.191~4.892）,以及合并头部损伤（OR=6.302,95%CI 2.270~13.175）或胸部损伤（OR=12.233,95%CI 5.193~33.985）是骨盆骨折患者死亡相关危险因素（P 〈0.01）。早期行血管栓塞治疗有助于降低死亡风险（OR=0.887,95%CI 0.875~0.899）。结论创伤评分高,出现严重休克、昏迷、氧合指数下降和6 h 乳酸清除率降低,合并头部和胸部损伤是导致 Tile C 型骨盆骨折患者死亡的危险因素。展开更多
基金National Key Research and Development Program of China(2023YFB3711200)Key Research and Development Project of Henan Province(231111230700).
文摘This study addresses the challenge of directly determining the elastic modulus of complex shaped ceramic products—such as gas turbine combustor tiles—using conventional standardized methods,which are limited by specimen geometry.A rapid,non-destructive testing method based on the impulse excitation technique(IET)and a shape factor coefficient was proposed.Three types of shaped ceramic tiles were selected.The elastic modulus of standard rectangular specimens obtained by destructive sampling was used as the reference value,and the shape factor coefficient for each tile type was calibrated by combining the mass and fundamental frequency of the whole tile.Using this coefficient,the elastic modulus of whole tiles was calculated solely from non-destructively measured mass and frequency.The results show that the deviation between the elastic modulus derived from the proposed method and that from destructive testing is less than 5%,confirming the accuracy and reliability of the approach.The method overcomes the shape restrictions inherent in traditional testing,offering a fast,non-destructive solution suitable for onsite quality assessment and process control during the production of shaped ceramic components.
文摘To better guide the coating process of rectangular tiles on a ship hull, a computerized three-dimensional design method is proposed. Research was done on a tile generating algorithm, tile laying design flow, tiles gap examination algorithm, and tiles slight displacement, as well as cutting and rotating algorithms.A three-dimensional design system was developed using an MDT platform. The application of this system indicates that using the design arrangement to coat tiles on a ship’s hull can result in enhanced coating quality.
基金Project supported by the National Natural Science Foundation of China for Distinguished Young Scholars (No. 60225009)the Major Research Plan of China (No. 90405003)
文摘SimWall is a user-friendly, stereo tiled display wall system composed of 18 commodity projectors operated by a Linux graphics cluster. Collaborating together, these projectors work as a single logical display capable of giving a high-resolution show, large-scale, and passive stereo scene. In order to avoid tedious system setup and maintenance, software-based automatic geometry and photometric calibration are used. The software calibration is integrated to the system seamlessly by an on-card transform method and is transparent to users. To end-users, SimWall works just as a common PC, but provides super computing, rendering and displaying ability. In addition, SimWall has stereoscopic function that gives users a semi-immersive experience in polarized passive way. This paper presents system architecture, implementation, and other technical issues such as hardware constraints, projectors alignment, geometry and photometric calibration, implementation of passive stereo, and development of overall soft- ware environment.
基金partially funded by "Vicerrectorado de Investigación de la Universitat Politècnica de València" under projects with references PAID-1121 and PAID-12-21
文摘In this paper, a scalable hardware and software architecture for tiled display systems (a.k.a. videowalls), which can be implemented by using low-cost devices, together with a dynamic web-based management and configuration service are proposed. It has been designed to support both stored and live broadcast/broadband content, in mosaic or warp distributions. The displays and devices can be dynamically configured via web in different ways: the displays can create a single display of a larger size;or they can be configured in a customized way in order to playout different media contents in different display combinations. As display renderers, low-cost devices are proposed as the main hardware element to obtain affordable videowall systems. As a proof of concept, two prototypes have been implemented, including an accurate synchronization mechanism based on a Master/Slave control scheme and aggressive and smooth playout adjustment techniques. To evidence the good performance of the prototypes and configuration service, both objective and subjective evaluations have been conducted regarding synchronization accuracy and usability. On the one hand, the mean values of the asynchronies between the video playout processes in each display are kept below 25ms (i.e., frame accuracy). On the other hand, the obtained usability score in the System Usability Scale (SUS) test has been 88.65, which is considered as excellent.
文摘We have developed a web-based processing system that can simulate positive and negative sea level changes globally by selecting the best Digital Elevation Model (DEM) for a target region from multiple DEMs. A PNG elevation tile format is used as the DEM format, which reduces the DEM data size. The PNG tile format implements client-based processing, and the DEM data are provided from different websites. In addition, the smart tile architecture is adopted, which enables on-demand simulation by adding a tile conversion process (<em>i.e.</em>, a DEM selection process) during image drawing by using JavaScript. To demonstrate the system, we have employed three DEMs,<em> i.e.</em>, the Geospatial Information Authority of Japan (GSI) map (~10-m resolution), the ASTER Global Digital Elevation Models (ASTER GDEM version 3) as global land area (~30-m resolution), and the General Bathymetric Chart of the Oceans as bathymetric data (~1000-m resolution). The ASTER Global Water Bodies Database is also used in the data selection process. The GSI provides their DEM in a PNG elevation tile format, and the other data are provided by the Geological Survey of Japan in PNG elevation tile format. We assume the current DEM sea level as 0 m, and the sea level can be changed to an arbitrary integer value (<span style="white-space:nowrap;">−</span>10,000 to 10,000 m). Combining ASTER GDEM for land and GEBCO for sea makes it possible to target DEM of the whole earth. Moreover, it was shown that if a higher resolution DEM is available, it is possible to combine the higher resolution DEM in that area. The combining the PNG elevation tile format with the smart tile architecture demonstrates the possibilities of a client-based web processing service like that of the server-based OGC Web Processing Service.
文摘目的：回顾性分析 Tile C 型骨盆骨折患者死亡相关的危险因素。方法2010年1月至2014年12月我院收治的 Tile C 型骨盆骨折患者139例,收集资料包括术前一般情况、伤后就诊时间、休克指数、各类创伤评分、最低氧合指数、伤后6 h 乳酸清除率等,采用多因素 Logistic 回归分析死亡相关危险因素。结果入院后死亡41例（29.5%）,其中入院后48 h 内死亡36例（25.9%）。多因素回归分析显示,休克指数＆gt;2（OR=2.591,95%CI 1.041~4.216）、损伤严重程度评分（ISS）≥25分（OR=47.96,95%CI 15.89~147.23）、改良创伤评分（RTS）≤8分（OR=6.917,95%CI 1.147-13.862）、格拉斯哥昏迷评分（GCS）〈9分（OR=4.172,95%CI 2.962~6.268）、最低氧合指数〈200（OR=117.016,95%CI 51.011~176.032）、伤后6 h 乳酸清除率〈10%（OR=2.785,95%CI 1.191~4.892）,以及合并头部损伤（OR=6.302,95%CI 2.270~13.175）或胸部损伤（OR=12.233,95%CI 5.193~33.985）是骨盆骨折患者死亡相关危险因素（P 〈0.01）。早期行血管栓塞治疗有助于降低死亡风险（OR=0.887,95%CI 0.875~0.899）。结论创伤评分高,出现严重休克、昏迷、氧合指数下降和6 h 乳酸清除率降低,合并头部和胸部损伤是导致 Tile C 型骨盆骨折患者死亡的危险因素。
