To ensure the dimensional accuracy of the final blade profile,it is necessary for precision Electrochemical Machining(ECM)of blade profile to come into an equilibrium state.However,after Electrochemical Trepanning(ECT...To ensure the dimensional accuracy of the final blade profile,it is necessary for precision Electrochemical Machining(ECM)of blade profile to come into an equilibrium state.However,after Electrochemical Trepanning(ECTr),the cascade channel of the blisk is narrow,and the blank allowance distribution is uneven,making it difficult for the precision ECM to become balanced.In blisk production,the two-step method cannot make precision ECM enter equilibrium for some blisk types.A three-step processing method is proposed to overcome this problem.The threestep method adds Electrochemical Homogenizing Machining(ECHM)between the ECTr and precision ECM steps so that the blank allowance can be homogenized quickly without unduly affecting the minimum allowance.Comparative machining experiments of the two-and three-step methods were performed to verify the improvement to blade machining accuracy.The processing results show that the contour parameters of the blade after the three-step method implementation are much better.The allowance difference of the concave(convex)side decreased by 70.5%(65%).In addition,the current in the three-step method is stable at 110 A at the end of precision ECM,verifying successfully entering the equilibrium state.展开更多
A numerical algorithm using a bilinear or linear finite element and semi-implicit three-step method is presented for the analysis of incompressible viscous fluid problems. The streamline upwind/Petrov-Galerkin (SUPG) ...A numerical algorithm using a bilinear or linear finite element and semi-implicit three-step method is presented for the analysis of incompressible viscous fluid problems. The streamline upwind/Petrov-Galerkin (SUPG) stabilization scheme is used for the formulation of the Navier-Stokes equations. For the spatial discretization, the convection term is treated explicitly, while the viscous term is treated implicitly, and for the temporal discretization, a three-step method is employed. The present method is applied to simulate the lid driven cavity problems with different geometries at low and high Reynolds numbers. The results compared with other numerical experiments are found to be feasible and satisfactory.展开更多
The hydrophobicity of the lotus leaf is mainly due to its surface micro-nano composite structure. In order to mimic the lotus structure, ZnO micro-nano composite hydrophobic films were prepared via the three-step meth...The hydrophobicity of the lotus leaf is mainly due to its surface micro-nano composite structure. In order to mimic the lotus structure, ZnO micro-nano composite hydrophobic films were prepared via the three-step method. On thin buffer films of SiO2, which were first fabricated on glass substrates by the so,gel dip-coating method, a ZnO seed layer was deposited via RF magnetron sputtering. Then two different ZnO films, micro-nano and micro-only flowerlike structures, were grown by the hydrothermal method. The prepared films have different hydrophobic properties after surface modification. The structures of the obtained ZnO films were characterized using x-ray diffraction and field-emission scanning electron microscopy. A conclusion that a micro-nano composite structure is more beneficial to hydrophobicity than a micro-only structure was obtained through research into the effect of structure on hydrophobic properties.展开更多
First a general model for a three-step projection method is introduced, and second it has been applied to the approximation solvability of a system of nonlinear variational inequality problems in a Hilbert space setti...First a general model for a three-step projection method is introduced, and second it has been applied to the approximation solvability of a system of nonlinear variational inequality problems in a Hilbert space setting. Let H be a real Hilbert space and K be a nonempty closed convex subset of H. For arbitrarily chosen initial points x0, y0, z0 ∈ K, compute sequences xn, yn, zn such thatT ： K→ H is a nonlinear mapping onto K. At last three-step models are applied to some variational inequality problems.展开更多
Purpose: To design an efficient high-performance algorithm for semantic annotation of biodiversity documents in Chinese.Design/methodology/approach: Data set consists of 1,000 randomly selected documents from Flora of...Purpose: To design an efficient high-performance algorithm for semantic annotation of biodiversity documents in Chinese.Design/methodology/approach: Data set consists of 1,000 randomly selected documents from Flora of China. Comparative evaluation of the proposed approach with the Na ve Bayes algorithm have been developed before for the same purpose.Findings: Experimental results show that the heuristics based algorithm outperformed the Na ve Bayes algorithm. The use of leading words helped improving the annotation performance while prioritizing rule application based on their weights had no significant impact on algorithm performance.Research limitations: The ICTCLAS was used to identify word boundaries off-shelf without optimatization for biodiversity domain. This may have not made the best use of the tool.Practical implications & Originality/value: The performance of heuristics based approach,enhanced by leading words analysis, reached an F value of 0.9216, which is sufficiently accurate for practical use.展开更多
A two-dimensional numerical model based on the Navier-Stokes equations and computational Lagrangian-Eulerian advection remap-volume of fluid （CLEAR-VOF） method was developed to simulate wave and flow problems. The N...A two-dimensional numerical model based on the Navier-Stokes equations and computational Lagrangian-Eulerian advection remap-volume of fluid （CLEAR-VOF） method was developed to simulate wave and flow problems. The Navier-Stokes equations were discretized with a three-step finite element method that has a third-order accuracy. In the CLEAR-VOF method, the VOF function F was calculated in the Lagrangian manner and allowed the complicated free surface to be accurately captured. The propagation of regular waves and solitary waves over a flat bottom, and shoaling and breaking of solitary waves on two different slopes were simulated with this model, and the numerical results agreed with experimental data and theoretical solutions. A benchmark test of dam-collapse flow was also simulated with an unstructured mesh, and the capability of the present model for wave and flow simulations with unstructured meshes, was verified. The results show that the model is effective for numerical simulation of wave and flow problems with both structured and unstructured meshes.展开更多
A stable finite element method for the time dependent Navier-Stokes equations was used for studying the wind flow and pollutant dispersion within street canyons. A three-step fractional method was used to solve the ve...A stable finite element method for the time dependent Navier-Stokes equations was used for studying the wind flow and pollutant dispersion within street canyons. A three-step fractional method was used to solve the velocity field and the pressure field separately from the governing equations. The Streamline Upwind Petrov-Galerkin(SUPG) method was used to get stable numerical results. Numerical oscillation was minimized and satisfactory results can be obtained for flows at high Reynolds numbers. Simulating the flow over a square cylinder within a wide range of Reynolds numbers validates the wind field model. The Strouhal numbers obtained from the numerical simulation had a good agreement with those obtained from experiment. The wind field model developed in the present study is applied to simulate more complex flow phenomena in street canyons with two different building configurations. The results indicated that the flow at rooftop of buildings might not be assumed parallel to the ground as some numerical modelers did. A counter-clockwise rotating vortex may be found in street canyons with an inflow from the left to right. In addition, increasing building height can increase velocity fluctuations in the street canyon under certain circumstances, which facilitate pollutant dispersion. At high Reynolds numbers, the flow regimes in street canyons do not change with inflow velocity.展开更多
In the Chenggong tunnel of Kunming, aiming at the engineering of shallow buried and strongly expanded surrounding rock, the construction method of three steps plus central columns is introduced. The soil of Chenggong ...In the Chenggong tunnel of Kunming, aiming at the engineering of shallow buried and strongly expanded surrounding rock, the construction method of three steps plus central columns is introduced. The soil of Chenggong Tunnel is tested in laboratory to determine its expansibility. The traditional three-step method and three-step plus center pillar method are compared and analyzed by using MIDAS-GTS. Finally, the deformation of surrounding rock after the construction of three-step plus center pillar method is obtained through on-site monitoring. The results show that: 1) The free expansion rate, montmorillonite content and cation exchange capacity of Chenggong tunnel soil are determined, and the expansive parameters are obtained. 2) Through numerical simulation, it is concluded that under the condition of strong expansive soil and weak surrounding rock, the settlement of vault and two sides caused by the traditional step method are both larger than that of the three steps plus center pillar method. This new improved method can effectively reduce the disturbance to surrounding rock and significantly reduce the settlement of vault;3) The data of vault settlement and displacement of two sides of the tunnel after the construction of the three-step plus center pillar method are obtained by on-site monitoring, and are simulated and analyzed by using MIDAS-GTS software. The relative error value of vault settlement obtained by the two methods is 1%, which indicates that MIDAS-GTS has good simulation effect on the stress state and deformation state of the tunnel, and further indicates that this method is very practical for the case of small convergence of side walls and large vault settlement.展开更多
基金supported by the National Natural Science Foundation of China(No.52075253)the Innovation Research Team of the National Natural Science Foundation of China(No.51921003)。
文摘To ensure the dimensional accuracy of the final blade profile,it is necessary for precision Electrochemical Machining(ECM)of blade profile to come into an equilibrium state.However,after Electrochemical Trepanning(ECTr),the cascade channel of the blisk is narrow,and the blank allowance distribution is uneven,making it difficult for the precision ECM to become balanced.In blisk production,the two-step method cannot make precision ECM enter equilibrium for some blisk types.A three-step processing method is proposed to overcome this problem.The threestep method adds Electrochemical Homogenizing Machining(ECHM)between the ECTr and precision ECM steps so that the blank allowance can be homogenized quickly without unduly affecting the minimum allowance.Comparative machining experiments of the two-and three-step methods were performed to verify the improvement to blade machining accuracy.The processing results show that the contour parameters of the blade after the three-step method implementation are much better.The allowance difference of the concave(convex)side decreased by 70.5%(65%).In addition,the current in the three-step method is stable at 110 A at the end of precision ECM,verifying successfully entering the equilibrium state.
基金Project supported by the National Natural Science Foundation of China (No.51078230)the Research Fund for the Doctoral Program of Higher Education of China (No.200802480056)the Key Project of Fund of Science and Technology Development of Shanghai (No.10JC1407900),China
文摘A numerical algorithm using a bilinear or linear finite element and semi-implicit three-step method is presented for the analysis of incompressible viscous fluid problems. The streamline upwind/Petrov-Galerkin (SUPG) stabilization scheme is used for the formulation of the Navier-Stokes equations. For the spatial discretization, the convection term is treated explicitly, while the viscous term is treated implicitly, and for the temporal discretization, a three-step method is employed. The present method is applied to simulate the lid driven cavity problems with different geometries at low and high Reynolds numbers. The results compared with other numerical experiments are found to be feasible and satisfactory.
基金supported by the Science Fund of Anhui Province,China(Grant No 070414187)the National Fund for Fostering Talents in Basic Science of China(Grant No J0630319/J0103)
文摘The hydrophobicity of the lotus leaf is mainly due to its surface micro-nano composite structure. In order to mimic the lotus structure, ZnO micro-nano composite hydrophobic films were prepared via the three-step method. On thin buffer films of SiO2, which were first fabricated on glass substrates by the so,gel dip-coating method, a ZnO seed layer was deposited via RF magnetron sputtering. Then two different ZnO films, micro-nano and micro-only flowerlike structures, were grown by the hydrothermal method. The prepared films have different hydrophobic properties after surface modification. The structures of the obtained ZnO films were characterized using x-ray diffraction and field-emission scanning electron microscopy. A conclusion that a micro-nano composite structure is more beneficial to hydrophobicity than a micro-only structure was obtained through research into the effect of structure on hydrophobic properties.
文摘First a general model for a three-step projection method is introduced, and second it has been applied to the approximation solvability of a system of nonlinear variational inequality problems in a Hilbert space setting. Let H be a real Hilbert space and K be a nonempty closed convex subset of H. For arbitrarily chosen initial points x0, y0, z0 ∈ K, compute sequences xn, yn, zn such thatT ： K→ H is a nonlinear mapping onto K. At last three-step models are applied to some variational inequality problems.
基金supported by the National Social Science Foundation of China (Grant No.:11BTQ024)the Foundation for Humanities and Social Sciences of the Chinese Ministry of Education (Grant No.:10YJC87004)
文摘Purpose: To design an efficient high-performance algorithm for semantic annotation of biodiversity documents in Chinese.Design/methodology/approach: Data set consists of 1,000 randomly selected documents from Flora of China. Comparative evaluation of the proposed approach with the Na ve Bayes algorithm have been developed before for the same purpose.Findings: Experimental results show that the heuristics based algorithm outperformed the Na ve Bayes algorithm. The use of leading words helped improving the annotation performance while prioritizing rule application based on their weights had no significant impact on algorithm performance.Research limitations: The ICTCLAS was used to identify word boundaries off-shelf without optimatization for biodiversity domain. This may have not made the best use of the tool.Practical implications & Originality/value: The performance of heuristics based approach,enhanced by leading words analysis, reached an F value of 0.9216, which is sufficiently accurate for practical use.
基金supported by the National Natural Science Foundation of China (Grant No. 50679008)
文摘A two-dimensional numerical model based on the Navier-Stokes equations and computational Lagrangian-Eulerian advection remap-volume of fluid （CLEAR-VOF） method was developed to simulate wave and flow problems. The Navier-Stokes equations were discretized with a three-step finite element method that has a third-order accuracy. In the CLEAR-VOF method, the VOF function F was calculated in the Lagrangian manner and allowed the complicated free surface to be accurately captured. The propagation of regular waves and solitary waves over a flat bottom, and shoaling and breaking of solitary waves on two different slopes were simulated with this model, and the numerical results agreed with experimental data and theoretical solutions. A benchmark test of dam-collapse flow was also simulated with an unstructured mesh, and the capability of the present model for wave and flow simulations with unstructured meshes, was verified. The results show that the model is effective for numerical simulation of wave and flow problems with both structured and unstructured meshes.
文摘A stable finite element method for the time dependent Navier-Stokes equations was used for studying the wind flow and pollutant dispersion within street canyons. A three-step fractional method was used to solve the velocity field and the pressure field separately from the governing equations. The Streamline Upwind Petrov-Galerkin(SUPG) method was used to get stable numerical results. Numerical oscillation was minimized and satisfactory results can be obtained for flows at high Reynolds numbers. Simulating the flow over a square cylinder within a wide range of Reynolds numbers validates the wind field model. The Strouhal numbers obtained from the numerical simulation had a good agreement with those obtained from experiment. The wind field model developed in the present study is applied to simulate more complex flow phenomena in street canyons with two different building configurations. The results indicated that the flow at rooftop of buildings might not be assumed parallel to the ground as some numerical modelers did. A counter-clockwise rotating vortex may be found in street canyons with an inflow from the left to right. In addition, increasing building height can increase velocity fluctuations in the street canyon under certain circumstances, which facilitate pollutant dispersion. At high Reynolds numbers, the flow regimes in street canyons do not change with inflow velocity.
文摘In the Chenggong tunnel of Kunming, aiming at the engineering of shallow buried and strongly expanded surrounding rock, the construction method of three steps plus central columns is introduced. The soil of Chenggong Tunnel is tested in laboratory to determine its expansibility. The traditional three-step method and three-step plus center pillar method are compared and analyzed by using MIDAS-GTS. Finally, the deformation of surrounding rock after the construction of three-step plus center pillar method is obtained through on-site monitoring. The results show that: 1) The free expansion rate, montmorillonite content and cation exchange capacity of Chenggong tunnel soil are determined, and the expansive parameters are obtained. 2) Through numerical simulation, it is concluded that under the condition of strong expansive soil and weak surrounding rock, the settlement of vault and two sides caused by the traditional step method are both larger than that of the three steps plus center pillar method. This new improved method can effectively reduce the disturbance to surrounding rock and significantly reduce the settlement of vault;3) The data of vault settlement and displacement of two sides of the tunnel after the construction of the three-step plus center pillar method are obtained by on-site monitoring, and are simulated and analyzed by using MIDAS-GTS software. The relative error value of vault settlement obtained by the two methods is 1%, which indicates that MIDAS-GTS has good simulation effect on the stress state and deformation state of the tunnel, and further indicates that this method is very practical for the case of small convergence of side walls and large vault settlement.
