Generally, most soil slope failures are induced by rainfall infiltration, a process that involves interactions between the liquid phase, gas phase,and solid skeleton in an unsaturated soil slope. In this study, a loos...Generally, most soil slope failures are induced by rainfall infiltration, a process that involves interactions between the liquid phase, gas phase,and solid skeleton in an unsaturated soil slope. In this study, a loosely coupled liquid-gas-solid three-phase model, linking two numerical codes,TOUGH2/EOS3, which is used for water-air two-phase flow analysis, and FLAC^(3D), which is used for mechanical analysis, was established. The model was validated through a documented water drainage experiment over a sandy column and a comparison of the results with measured data and simulated results from other researchers. The proposed model was used to investigate the features of water-air two-phase flow and stress fields in an unsaturated soil slope during rainfall infiltration. The slope stability analysis was then performed based on the simulated water-air two-phase seepage and stress fields on a given slip surface. The results show that the safety factor for the given slip surface decreases first, then increases, and later decreases until the rainfall stops. Subsequently, a sudden rise occurs. After that, the safety factor decreases continually and reaches its lowest value, and then increases slowly to a steady value. The lowest value does not occur when the rainfall stops, indicating a delayed effect of the safety factor. The variations of the safety factor for the given slip surface are therefore caused by a combination of pore-air pressure, matric suction, normal stress, and net normal stress.展开更多
The gas-liquid-solid three-phase mixed flow is the most general in multiphase mixed transportation. It is significant to exactly solve the coupling hydraulic transient problems of this type of multiphase mixed flow in...The gas-liquid-solid three-phase mixed flow is the most general in multiphase mixed transportation. It is significant to exactly solve the coupling hydraulic transient problems of this type of multiphase mixed flow in pipelines. Presently, the method of characteristics is widely used to solve classical hydraulic transient problems. However, when it is used to solve coupling hydraulic transient problems, excessive interpolation errors may be introduced into the results due to unavoidable multiwave interpolated calculations. To deal with the problem, a finite difference scheme based on the Steger- Warming flux vector splitting is proposed. A flux vector splitting scheme is established for the coupling hydraulic transient model of gas-liquid-solid three-phase mixed flow in the pipelines. The flux subvectors are then discretized by the Lax-Wendroff central difference scheme and the Warming-Beam upwind difference scheme with second-order precision in both time and space. Under the Rankine-Hugoniot conditions and the corresponding boundary conditions, an effective solution to those points located at the boundaries is developed, which can avoid the problem beyond the calculation region directly induced by the second-order discrete technique. Numerical and experimental verifications indicate that the proposed scheme has several desirable advantages including high calculation precision, excellent shock wave capture capability without false numerical oscillation, low sensitivity to the Courant number, and good stability.展开更多
The local gas-phase flow characteristics such as local gas holdup(εg), local bubble velocity (V_b) and local bubble mean diameter(d_b) at a specified point in a gas-liquid-solid three-phase reversedflow jet loop reac...The local gas-phase flow characteristics such as local gas holdup(εg), local bubble velocity (V_b) and local bubble mean diameter(d_b) at a specified point in a gas-liquid-solid three-phase reversedflow jet loop reactor was experimentally investigated by a five-pointconductivity probe. The effects of gas jet flow rate, liquid jet flowrate, solid loading, nozzle diameter and axial position on the localεg, V_b and d_b profiles were discussed. The presence of solids atlow solid concentrations not only increased the local εg and V_b,but also decreased the local d_b. The optimum solid loading for themaximum local εg and V_b together with the minimum local d_b was0.16×10^-3 m^3, corresponding to a solid volume fraction ε_S＝2.5/100.展开更多
To achieve high power rating and low current harmonics of motor drive,this paper develops a dual three-phase open-winding permanent magnet synchronous motor(DTP-OW-PMSM)drive with the DC-link voltage ratio of 2:1:1.Ba...To achieve high power rating and low current harmonics of motor drive,this paper develops a dual three-phase open-winding permanent magnet synchronous motor(DTP-OW-PMSM)drive with the DC-link voltage ratio of 2:1:1.Based on this topology,this paper proposes a DTP four-level space vector pulse width modulation(DTP-FL SVPWM)strategy.First,two identical three-phase four-level space vector diagrams are constructed and divided.Then,three adjacent vectors nearest to the reference vector in each diagram are selected for the vector synthesis to guarantee high modulation precision and low switching frequency.Furthermore,to avoid the modulation error caused by the voltage deviation,the proposed DTP-FL SVPWM strategy is further optimized through unified duty ratio compensation(UDRC).The effectiveness of the proposed strategy is verified through experiments.展开更多
The growing demand for efficient high-power switching power supplies has spurred interest in advanced topologies.The three-phase VIENNA converter stands out for its high power factor,simplified structure,and robust pe...The growing demand for efficient high-power switching power supplies has spurred interest in advanced topologies.The three-phase VIENNA converter stands out for its high power factor,simplified structure,and robust performance.Current research focuses on its operational principles,control strategies,and behavior under various load conditions.Key considerations include component selection,thermal management,and EMI/EMC optimization.This topology finds applications across renewable energy systems,industrial equipment,telecommunications,and electric vehicle charging infrastructures.Comparative analyses with alternative topologies and cost-benefit evaluations are also addressed.Future developments are expected to emphasize the integration of wide-bandgap devices and advancements in digital control techniques to further enhance efficiency and system performance.展开更多
Three-phase NaCl-H_2O fluid inclusions featuring halite dissolution temperature（Tm）higher than vapor bubble disappearance temperature（T_h） are commonly observed in porphyry copper/molybdenum deposits,skarn-type de...Three-phase NaCl-H_2O fluid inclusions featuring halite dissolution temperature（Tm）higher than vapor bubble disappearance temperature（T_h） are commonly observed in porphyry copper/molybdenum deposits,skarn-type deposits and other magmatic- hydrothermal ore deposits.Based on ｜ΔV_1｜（the absolute value of volume variation of NaCl-H_2O solution in a heating or cooling process of inclusions）= ｜ΔV_s｜（the absolute value of volume variation of the halite crystal in a heating or cooling process of inclusions） and on the principle of conservation of the mass of NaCl and H_2O,we systematically calculated the densities of NaCl-H_2O solutions in the solid-liquid two-phase field for temperatures（T_h） from 0.1℃ to 800℃ and salinities from 26.3 wt%to 99.2wt%.Consequently for the first time we obtained the upper limit of the density of NaCI-H_2O solutions in the solid-liquid twophase field for T_b〈T_m inclusions with variant salinities.The results indicate that for inclusions of the T_h〈T_m type with the same T_h,the higher the T_m or salinity is,the higher the density of the NaClsaturated solution will be.If a group of fluid inclusions were homogeneously trapped,they must have the same T_h value and the same T_m or salinity value.This may be used to distinguish homogeneous,inhomogeneous,and multiple entrapments of fluid inclusions.展开更多
The dual three-phase PMSM(DTP-PMSM)drives have received wide attention at high-power high-efficiency applications due to their merits of high output current ability and copper-loss-free field excitation.Meanwhile,the ...The dual three-phase PMSM(DTP-PMSM)drives have received wide attention at high-power high-efficiency applications due to their merits of high output current ability and copper-loss-free field excitation.Meanwhile,the DTPPMSM drive provides higher fault-tolerant capability for highreliability applications,e.g.,pumps and actuators in aircraft.For high-power drives with limited switching frequencies and highspeed drives with large fundamental frequencies,the ratio of switching frequency to fundamental frequency,i.e.,the carrier ratio,is usually below 15,which would significantly degrade the control performance.The purpose of this paper is to review the recent work on the modulation and control schemes for improving the operation performance of DTP-PMSM drives with low carrier ratios.Specifically,three categories of methods,i.e.,the space vector modulation based control,the model predictive control(MPC),and the optimized pulse pattern(OPP)based control are reviewed with principles and performance.In addition,brief discussions regarding the comparison and future trends are presented for low-carrier-ratio(LCR)modulation and control schemes of DTP-PMSM drives.展开更多
In contrast to the concurrent mixer-settler,the interaction between the mixing and settling chambers have to be taken into account in the simulation of the countercurrent mixer-settler,and no work has been reported fo...In contrast to the concurrent mixer-settler,the interaction between the mixing and settling chambers have to be taken into account in the simulation of the countercurrent mixer-settler,and no work has been reported for this equipment.In this work,a three-phase flow model based on the Eulerian multiphase model,coupled with a sliding mesh model is proposed for a countercurrent mixer-settler.Based on this,the dispersed phase distribution,flow pattern,and pressure distribution are investigated,which can help to fill the gap in the operation mechanism.In addition,the velocity vector distribution at the phase port shows an intriguing phenomenon that two types of vectors with opposite directions are distributed on the left and right sides of the same plane,which indicates that the material exchange in the mixing and settling chambers is simultaneous.Analysis of this variation at this location by a fast Fourier transform(FFT)method reveals that it is mainly influenced by the mixing chamber and is consistent with the main period of the outlet flow fluctuations.Therefore,by monitoring the fluctuation of the outlet flow and then analyzing it by the FFT method,the state of the whole tank can be determined,which makes it promising for the design of control systems for countercurrent mixer-settlers.展开更多
In this work,we proposed a strategy for the hydrolysis of native corn starch after the treatment of corn starch in an ionic liquid aqueous solution,and it is an awfully“green”and simple means to obtain starch with l...In this work,we proposed a strategy for the hydrolysis of native corn starch after the treatment of corn starch in an ionic liquid aqueous solution,and it is an awfully“green”and simple means to obtain starch with low molecular weight and amorphous state.X-ray diffraction results revealed that the natural starch crystalline region was largely disrupted by ionic liquid owing to the broken intermolecular and intramolecular hydrogen bonds.After hydrolysis,the morphology of starch changed from particles of native corn starch into little pieces,and their molecular weight could be effectively regulated during the hydrolysis process,and also the hydrolyzed starch samples exhibited decreased thermal stability with the extension of hydrolysis time.This work would counsel as a powerful tool for the development of native starch in realistic applications.展开更多
As the global textile industry has accelerated its transition to a circular economy,iterative innovation in regenerated cellulose fibers has become a key industry focus.With viscose fiber having been industrialized fo...As the global textile industry has accelerated its transition to a circular economy,iterative innovation in regenerated cellulose fibers has become a key industry focus.With viscose fiber having been industrialized for over a century and lyocell fiber gaining market recognition because of its environmentally friendly process,which is the next regenerated cellulose fiber.Herein,ionic liquids with low vapor pressure,nonflammability,relatively simple recovery,and high dissolution efficiency were used to fabricate regenerated cellulose fibers.The viscose and lyocell properties of the fibers were systematically compared,including microscopic morphology,dyeing behavior,fibrillation resistance,mechanical properties,yarn-forming capacity,and fabric performance.The ionic liquid(IL)fiber exhibited a smooth surface and circular cross-section,with the highest tensile strength,moderate dyeing and fibrillation properties,and similar spinning and weaving performance.This work can provide a reference for the commercial application of regenerated cellulose fibers fabricated from ionic liquid.展开更多
Pediatric cancers are particularly significant due to their uncommon occurrence in children,driven by a variety of underlying factors.Because of their distinct molecular and genetic makeup,which makes early detection ...Pediatric cancers are particularly significant due to their uncommon occurrence in children,driven by a variety of underlying factors.Because of their distinct molecular and genetic makeup,which makes early detection challenging,they are linked to problems.Diagnostic methods like imaging and tissue biopsy are only effective when the tumor has reached a size that can be identified.The liquid biopsy technique,the least intrusive and most convenient diagnostic method,is the subject of this review.It focuses on the significance of single cell analysis in examining uncommon cancer types.The many biomarkers found in bodily fluids and the cancer types they are linked to in children have been assessed,as has the potential route towards early detection and cancer recurrence forecasting.Combining the single cell liquid biopsy with the newest technologies,such as computational and multi-omics approaches,which have improved the efficiency of processing massive and unique genetic data,appears promising.This article discusses on a number of case reports for uncommon pediatric malignancies,such as Neuroblastoma,Medulloblastoma,Wilms Tumor,Rhabdomyosarcoma,Ewing Sarcoma,and Retinoblastoma,as well as their liquid biopsy profiles.Furthermore,the findings raise ethical questions regarding the therapeutic application of the technology as well as possible difficulties related to clinical translation.The likelihood that this single cell liquid biopsy will be clinically validated and eventually used as a routine diagnostic tool for uncommon pediatric cancers will rise with the realistic approach to sensitivity monitoring,specificity upgrading,and optimization.展开更多
While desalination is a key solution for global freshwater scarcity,its implementation faces environmental challenges due to concentrated brine byproducts mainly disposed of via coastal discharge systems.Solar interfa...While desalination is a key solution for global freshwater scarcity,its implementation faces environmental challenges due to concentrated brine byproducts mainly disposed of via coastal discharge systems.Solar interfacial evaporation offers sustainable management potential,yet inevitable salt nucleation at evaporation interfaces degrades photothermal conversion and operational stability via light scattering and pathway blockage.Inspired by the mangrove leaf,we propose a photothermal 3D polydopamine and polypyrrole polymerized spacer fabric(PPSF)-based upward hanging model evaporation configuration with a reverse water feeding mechanism.This design enables zero-liquiddischarge(ZLD)desalination through phase-separation crystallization.The interconnected porous architecture and the rough surface of the PPSF enable superior water transport,achieving excellent solar-absorbing efficiency of 97.8%.By adjusting the tilt angle(θ),the evaporator separates the evaporation and salt crystallization zones via controlled capillary-driven brine transport,minimizing heat dissipation from brine discharge.At an optimal tilt angle of 52°,the evaporator reaches an evaporation rate of 2.81 kg m^(−2) h^(−1) with minimal heat loss(0.366 W)under 1-sun illumination while treating a 7 wt%waste brine solution.Furthermore,it sustains an evaporation rate of 2.71 kg m^(−2) h^(−1) over 72 h while ensuring efficient salt recovery.These results highlight a scalable,energy-efficient approach for sustainable ZLD desalination.展开更多
Structural engineering of Pt-based nanoalloys is crucial for the rational design and manufacturing of high-performance and low-cost electrocatalysts for hydrogen evolution reaction(HER).Here,we reported PtNi nanoparti...Structural engineering of Pt-based nanoalloys is crucial for the rational design and manufacturing of high-performance and low-cost electrocatalysts for hydrogen evolution reaction(HER).Here,we reported PtNi nanoparticles with a refined size of 2.71 nm and regular strains loaded on carbon black,synthesized using the high-temperature liquid shock(HTLS)method.This approach offers significant advantages over conventional synthesis methods,including high scalability,rapid reaction rates,and precise control over the size and shape of nanocrystals.Importantly,the synthesized PtNi electrocatalysts demonstrate outstanding catalytic activity and long-term stability for HER,achieving low overpotentials of 19 and 203 mV at current densities of 10 and 1000 mA/cm^(2),respectively.The superior performance can be attributed to the combination of a refined particle size,lattice strains,and synergistic effects between Pt and Ni.This rapid liquid-state synthesis demonstrated here holds great potential for scalable and industrial manufacturing of micro-/nano-catalysts.展开更多
Porous ionic liquid electrospray thrusters are the ideal propulsion technology for CubeSats because of their structural simplicity,high thrust accuracy and plume self-neutralization.The electrowetting technology can r...Porous ionic liquid electrospray thrusters are the ideal propulsion technology for CubeSats because of their structural simplicity,high thrust accuracy and plume self-neutralization.The electrowetting technology can replenish the propellant for the emitter online,thus prolonging the lifetime of the thruster.In order to gain a deeper understanding of its operating characteristics,the changes in thruster performance before and after propellant replenishment deserve to be scrutinized.In this study,the performance changes of a porous electrowetting ionic liquid electrospray thruster are tested by voltage-current test and time-of-flight mass spectrometry over a long operating time.The experimental results show that asymmetric operation with a negative current less than positive current for a long period of time causes anions to compensate for the emission after accumulation at the emitter,resulting in a phenomenon that the negative current is much larger than positive current.The reason for the difference in emission characteristics between the positive and negative modes is that the plume in the positive mode is quite ionized while the plume in the negative mode contains liquid droplets.This study provides a reference for the selection of operating conditions for ionic liquid electrospray thrusters.展开更多
The water hammer problem is an important issue in the dynamics of liquid propulsion system.This paper aims to use the Lattice Boltzmann Method(LBM)with entropy limiter to study the water hammer problems in propellant ...The water hammer problem is an important issue in the dynamics of liquid propulsion system.This paper aims to use the Lattice Boltzmann Method(LBM)with entropy limiter to study the water hammer problems in propellant feedlines.The dynamic characteristics of valve-closing water hammer and filling water hammer are investigated by this method,and the sensitivity of filling water hammer is analyzed with a single factor sensitivity analysis with 8 factors and 9 levels and a multi-factor sensitivity analysis with L_(27)(3^(13))orthogonal experiment based on range method.It is found that the solving result of LBM with entropy limiter is basically in good agreement with finite volume method,and using the entropy limiter can eliminate numerical oscillations when solving valve-closing water hammer problems and solve the numerical"blow up"when solving filling water hammer problems.It can be seen that the dynamic characteristics of valve-closing water hammer are relatively simple,while there are many factors that affect the filling water hammer and the degree of these effects varies.The effects on the maximum water hammer pressure are relatively uniform,but those on the water hammer response time vary greatly through the skewness analysis.展开更多
The radiative heat flux of the plume from reusable rockets is a critical parameter during the launch and return processes.This paper proposes a method for calculating radiative heat flux with higher accuracy than prev...The radiative heat flux of the plume from reusable rockets is a critical parameter during the launch and return processes.This paper proposes a method for calculating radiative heat flux with higher accuracy than previously reported for a recoverable nine-engine liquid-propellant rocket.Based on the Radiative Transfer Equation(RTE),this study employs the discrete transfer method to solve the transient RTE problem using physical properties to describe the problem while avoiding the need to directly solve mathematical equations.The proposed method can effectively determine the radiative heat flux of the flow field and is applicable to problems involving various geometries.Calculations reveal that during the ascent phase of the rocket,the radiative heat flux at the base of the vehicle reaches its maximum in the initial stages of the lift-off,reaching a maximum of~50 kW/m^(2),which is 2.24 times the maximum value during the return phase.During the deceleration stage of re-entry into the atmosphere,the maximum radiative heat flux recorded on the sidewall of the rocket is 29.1 kW/m^(2);the maximum heat flux on the bottom surface is approximately 22.3 kW/m^(2),accounting for 76.6%of that on the rocket's sidewall.This provides a basis for the thermal protection design of the rocket's bottom and walls as well as for the thermal management of cryogenic propellant tanks.Future research will involve ground engine testing and flight experiments to further validate the proposed model.展开更多
Developing a chiral material as versatile and universal chiral stationary phase(CSP) for chiral separation in diverse chromatographic techniques simultaneously is of great significance.In this study,we demonstrated fo...Developing a chiral material as versatile and universal chiral stationary phase(CSP) for chiral separation in diverse chromatographic techniques simultaneously is of great significance.In this study,we demonstrated for the first time that a chiral metal-organic cage(MOC),[Zn_(6)M_(4)],as a universal chiral recognition material for both multi-mode high-performance liquid chromatography(HPLC) and capillary gas chromatography(GC) enantioseparation.Two novel HPLC CSPs with different bonding arms(CSP-A with a cationic imidazolium bonding arm and CSP-B with an alkyl chain bonding arm) were prepared by clicking of functionalized chiral MOC [Zn_(6)M_(4)] onto thiolated silica via thiol-ene click chemistry.Meanwhile,a capillary GC column statically coated with the chiral MOC [Zn_(6)M_(4)] was also fabricated.The results showed that the chiral MOC exhibits excellent enantioselectivity not only in normal phase HPLC(NP-HPLC) and reversed phase(RP-HPLC) but also in GC,and various racemates were well separated,including alcohols,diols,esters,ketones,ethers,amines,and epoxides.Importantly,CSP-A and CSP-B are complementary to commercially available Chiralcel OD-H and Chiralpak AD-H columns in enantioseparation,which can separate some racemates that could not be or could not well be separated by the two widely used commercial columns,suggesting the great potential of the two prepared CSPs in enantioseparation.This work reveals that the chiral MOC is potential versatile chiral recognition materials for both HPLC and GC,and also paves the way to expand the potential applications of MOCs.展开更多
With the maturation of coalbed methane(CBM)exploitation and the transition into the late stages of dewatering and gas production,liquid loading in gathering pipelines has emerged as a major constraint on productivity ...With the maturation of coalbed methane(CBM)exploitation and the transition into the late stages of dewatering and gas production,liquid loading in gathering pipelines has emerged as a major constraint on productivity and operational stability.Based on real-time field data and gas-liquid physicochemical analyses,this study elucidates the mechanisms governing liquid loading formation under varying temperature,pressure,and water saturation conditions.An HYSYS model is employed to determine the water dew point,while the Turner model is used to evaluate the critical conditions for liquid holdup.The results indicate that gas water saturation exerts the dominant influence on liquid loading risk,followed by pressure,whereas temperature plays a comparatively minor role.When water saturation exceeds 2%and the operating temperature falls below the dew point,condensation-driven liquid loading increases sharply.To further characterize the spatial distribution of liquid accumulation,a steady-state OLGA model of a DN100 gathering pipeline network is developed to examine the effects of pipe diameter,water saturation,and soil temperature.The simulations show that larger pipe diameters and higher water saturation significantly aggravate liquid holdup,while elevated soil temperature mitigates liquid accumulation.Moreover,the liquid holdup ratio is found to correlate closely with flow regime transitions,confirming its suitability as a key indicator of liquid loading risk.Based on these findings,optimization strategies for pipeline design and operation are proposed.To mitigate liquid loading,the gathering pipeline velocity should be maintained above the critical value of 1.63 m/s,and the gas water content should be strictly controlled below 2%.Under operating conditions representative of the Hancheng block,it is recommended to reduce the pipeline diameter from DN130 to DN100 to enhance self-cleaning capacity.In addition,thermal insulation should be applied during winter operation to maintain the pipe wall temperature above 10◦C,thereby suppressing condensation-induced liquid accumulation.展开更多
Eggplant(Solanum melongena L.)is a globally important vegetable crop,renowned for its nutritional value and economic significance.It is abundant in bioactive compounds such as anthocyanins and chlorogenic acid,which h...Eggplant(Solanum melongena L.)is a globally important vegetable crop,renowned for its nutritional value and economic significance.It is abundant in bioactive compounds such as anthocyanins and chlorogenic acid,which have been associated with multiple health-promoting properties(Azuma et al.,2008;Gurbuz et al.,2018).Given its significant hybrid vigor,F1 hybrid varieties are widely preferred in commercial cultivation(Mistry et al.,2018).However,traditional breeding practices predominantly rely on phenotypic selection,a process that is not only labor-intensive but also time-consuming.展开更多
基金supported by the National Natural Science Foundation of China(Grants No.51579170 and 51179118)the Science Fund for Creative Research Groups of the National Natural Science Foundation of China(Grant No.51321065)
文摘Generally, most soil slope failures are induced by rainfall infiltration, a process that involves interactions between the liquid phase, gas phase,and solid skeleton in an unsaturated soil slope. In this study, a loosely coupled liquid-gas-solid three-phase model, linking two numerical codes,TOUGH2/EOS3, which is used for water-air two-phase flow analysis, and FLAC^(3D), which is used for mechanical analysis, was established. The model was validated through a documented water drainage experiment over a sandy column and a comparison of the results with measured data and simulated results from other researchers. The proposed model was used to investigate the features of water-air two-phase flow and stress fields in an unsaturated soil slope during rainfall infiltration. The slope stability analysis was then performed based on the simulated water-air two-phase seepage and stress fields on a given slip surface. The results show that the safety factor for the given slip surface decreases first, then increases, and later decreases until the rainfall stops. Subsequently, a sudden rise occurs. After that, the safety factor decreases continually and reaches its lowest value, and then increases slowly to a steady value. The lowest value does not occur when the rainfall stops, indicating a delayed effect of the safety factor. The variations of the safety factor for the given slip surface are therefore caused by a combination of pore-air pressure, matric suction, normal stress, and net normal stress.
基金supported by the Natural Science Foundation Project of CQ CSTC (No. 2010BB7421)
文摘The gas-liquid-solid three-phase mixed flow is the most general in multiphase mixed transportation. It is significant to exactly solve the coupling hydraulic transient problems of this type of multiphase mixed flow in pipelines. Presently, the method of characteristics is widely used to solve classical hydraulic transient problems. However, when it is used to solve coupling hydraulic transient problems, excessive interpolation errors may be introduced into the results due to unavoidable multiwave interpolated calculations. To deal with the problem, a finite difference scheme based on the Steger- Warming flux vector splitting is proposed. A flux vector splitting scheme is established for the coupling hydraulic transient model of gas-liquid-solid three-phase mixed flow in the pipelines. The flux subvectors are then discretized by the Lax-Wendroff central difference scheme and the Warming-Beam upwind difference scheme with second-order precision in both time and space. Under the Rankine-Hugoniot conditions and the corresponding boundary conditions, an effective solution to those points located at the boundaries is developed, which can avoid the problem beyond the calculation region directly induced by the second-order discrete technique. Numerical and experimental verifications indicate that the proposed scheme has several desirable advantages including high calculation precision, excellent shock wave capture capability without false numerical oscillation, low sensitivity to the Courant number, and good stability.
基金Supported by the National Natural Science Foundation of China (No. 29706006) and the General Corporation of Petrochemical Engineering of China (No.X598021).
文摘The local gas-phase flow characteristics such as local gas holdup(εg), local bubble velocity (V_b) and local bubble mean diameter(d_b) at a specified point in a gas-liquid-solid three-phase reversedflow jet loop reactor was experimentally investigated by a five-pointconductivity probe. The effects of gas jet flow rate, liquid jet flowrate, solid loading, nozzle diameter and axial position on the localεg, V_b and d_b profiles were discussed. The presence of solids atlow solid concentrations not only increased the local εg and V_b,but also decreased the local d_b. The optimum solid loading for themaximum local εg and V_b together with the minimum local d_b was0.16×10^-3 m^3, corresponding to a solid volume fraction ε_S＝2.5/100.
基金supported in part by the National Natural Science Foundation of China under Grant 62303333in part by the Project of Hetao Shenzhen-Hong Kong Science and Technology Innovation Cooperation Zone under Grant HZQB-KCZYB-2020083.
文摘To achieve high power rating and low current harmonics of motor drive,this paper develops a dual three-phase open-winding permanent magnet synchronous motor(DTP-OW-PMSM)drive with the DC-link voltage ratio of 2:1:1.Based on this topology,this paper proposes a DTP four-level space vector pulse width modulation(DTP-FL SVPWM)strategy.First,two identical three-phase four-level space vector diagrams are constructed and divided.Then,three adjacent vectors nearest to the reference vector in each diagram are selected for the vector synthesis to guarantee high modulation precision and low switching frequency.Furthermore,to avoid the modulation error caused by the voltage deviation,the proposed DTP-FL SVPWM strategy is further optimized through unified duty ratio compensation(UDRC).The effectiveness of the proposed strategy is verified through experiments.
文摘The growing demand for efficient high-power switching power supplies has spurred interest in advanced topologies.The three-phase VIENNA converter stands out for its high power factor,simplified structure,and robust performance.Current research focuses on its operational principles,control strategies,and behavior under various load conditions.Key considerations include component selection,thermal management,and EMI/EMC optimization.This topology finds applications across renewable energy systems,industrial equipment,telecommunications,and electric vehicle charging infrastructures.Comparative analyses with alternative topologies and cost-benefit evaluations are also addressed.Future developments are expected to emphasize the integration of wide-bandgap devices and advancements in digital control techniques to further enhance efficiency and system performance.
基金supported by China National Natural Science Foundation(No.4997032)the Basic Business Fee Special Foundation for Chinese central nonprofit research institutes(K0710)
文摘Three-phase NaCl-H_2O fluid inclusions featuring halite dissolution temperature（Tm）higher than vapor bubble disappearance temperature（T_h） are commonly observed in porphyry copper/molybdenum deposits,skarn-type deposits and other magmatic- hydrothermal ore deposits.Based on ｜ΔV_1｜（the absolute value of volume variation of NaCl-H_2O solution in a heating or cooling process of inclusions）= ｜ΔV_s｜（the absolute value of volume variation of the halite crystal in a heating or cooling process of inclusions） and on the principle of conservation of the mass of NaCl and H_2O,we systematically calculated the densities of NaCl-H_2O solutions in the solid-liquid two-phase field for temperatures（T_h） from 0.1℃ to 800℃ and salinities from 26.3 wt%to 99.2wt%.Consequently for the first time we obtained the upper limit of the density of NaCI-H_2O solutions in the solid-liquid twophase field for T_b〈T_m inclusions with variant salinities.The results indicate that for inclusions of the T_h〈T_m type with the same T_h,the higher the T_m or salinity is,the higher the density of the NaClsaturated solution will be.If a group of fluid inclusions were homogeneously trapped,they must have the same T_h value and the same T_m or salinity value.This may be used to distinguish homogeneous,inhomogeneous,and multiple entrapments of fluid inclusions.
基金supported by the National Key Research and Development Program of China under the grant of 2022YFB3403100。
文摘The dual three-phase PMSM(DTP-PMSM)drives have received wide attention at high-power high-efficiency applications due to their merits of high output current ability and copper-loss-free field excitation.Meanwhile,the DTPPMSM drive provides higher fault-tolerant capability for highreliability applications,e.g.,pumps and actuators in aircraft.For high-power drives with limited switching frequencies and highspeed drives with large fundamental frequencies,the ratio of switching frequency to fundamental frequency,i.e.,the carrier ratio,is usually below 15,which would significantly degrade the control performance.The purpose of this paper is to review the recent work on the modulation and control schemes for improving the operation performance of DTP-PMSM drives with low carrier ratios.Specifically,three categories of methods,i.e.,the space vector modulation based control,the model predictive control(MPC),and the optimized pulse pattern(OPP)based control are reviewed with principles and performance.In addition,brief discussions regarding the comparison and future trends are presented for low-carrier-ratio(LCR)modulation and control schemes of DTP-PMSM drives.
基金the National Natural Science Foundation of China(21978198)for financial support。
文摘In contrast to the concurrent mixer-settler,the interaction between the mixing and settling chambers have to be taken into account in the simulation of the countercurrent mixer-settler,and no work has been reported for this equipment.In this work,a three-phase flow model based on the Eulerian multiphase model,coupled with a sliding mesh model is proposed for a countercurrent mixer-settler.Based on this,the dispersed phase distribution,flow pattern,and pressure distribution are investigated,which can help to fill the gap in the operation mechanism.In addition,the velocity vector distribution at the phase port shows an intriguing phenomenon that two types of vectors with opposite directions are distributed on the left and right sides of the same plane,which indicates that the material exchange in the mixing and settling chambers is simultaneous.Analysis of this variation at this location by a fast Fourier transform(FFT)method reveals that it is mainly influenced by the mixing chamber and is consistent with the main period of the outlet flow fluctuations.Therefore,by monitoring the fluctuation of the outlet flow and then analyzing it by the FFT method,the state of the whole tank can be determined,which makes it promising for the design of control systems for countercurrent mixer-settlers.
文摘In this work,we proposed a strategy for the hydrolysis of native corn starch after the treatment of corn starch in an ionic liquid aqueous solution,and it is an awfully“green”and simple means to obtain starch with low molecular weight and amorphous state.X-ray diffraction results revealed that the natural starch crystalline region was largely disrupted by ionic liquid owing to the broken intermolecular and intramolecular hydrogen bonds.After hydrolysis,the morphology of starch changed from particles of native corn starch into little pieces,and their molecular weight could be effectively regulated during the hydrolysis process,and also the hydrolyzed starch samples exhibited decreased thermal stability with the extension of hydrolysis time.This work would counsel as a powerful tool for the development of native starch in realistic applications.
基金financially supported by the National Natural Science Foundation of China(Nos.22005226 and 52203124)Center for Carbon Neutral Chemistry,Institute of Chemistry,Chinese Academy of Sciences(No.CCNC-202402)+1 种基金the Basic and Advanced Research Project from Wuhan Science and Technology Bureau(No.2022013988065201)Hubei Integrative Technology and Innovation Center for Advanced Fiberous Materials,project(No.XC2024G3013)。
文摘As the global textile industry has accelerated its transition to a circular economy,iterative innovation in regenerated cellulose fibers has become a key industry focus.With viscose fiber having been industrialized for over a century and lyocell fiber gaining market recognition because of its environmentally friendly process,which is the next regenerated cellulose fiber.Herein,ionic liquids with low vapor pressure,nonflammability,relatively simple recovery,and high dissolution efficiency were used to fabricate regenerated cellulose fibers.The viscose and lyocell properties of the fibers were systematically compared,including microscopic morphology,dyeing behavior,fibrillation resistance,mechanical properties,yarn-forming capacity,and fabric performance.The ionic liquid(IL)fiber exhibited a smooth surface and circular cross-section,with the highest tensile strength,moderate dyeing and fibrillation properties,and similar spinning and weaving performance.This work can provide a reference for the commercial application of regenerated cellulose fibers fabricated from ionic liquid.
文摘Pediatric cancers are particularly significant due to their uncommon occurrence in children,driven by a variety of underlying factors.Because of their distinct molecular and genetic makeup,which makes early detection challenging,they are linked to problems.Diagnostic methods like imaging and tissue biopsy are only effective when the tumor has reached a size that can be identified.The liquid biopsy technique,the least intrusive and most convenient diagnostic method,is the subject of this review.It focuses on the significance of single cell analysis in examining uncommon cancer types.The many biomarkers found in bodily fluids and the cancer types they are linked to in children have been assessed,as has the potential route towards early detection and cancer recurrence forecasting.Combining the single cell liquid biopsy with the newest technologies,such as computational and multi-omics approaches,which have improved the efficiency of processing massive and unique genetic data,appears promising.This article discusses on a number of case reports for uncommon pediatric malignancies,such as Neuroblastoma,Medulloblastoma,Wilms Tumor,Rhabdomyosarcoma,Ewing Sarcoma,and Retinoblastoma,as well as their liquid biopsy profiles.Furthermore,the findings raise ethical questions regarding the therapeutic application of the technology as well as possible difficulties related to clinical translation.The likelihood that this single cell liquid biopsy will be clinically validated and eventually used as a routine diagnostic tool for uncommon pediatric cancers will rise with the realistic approach to sensitivity monitoring,specificity upgrading,and optimization.
基金supported by National Key Research and Development Program of China(2022YFB3804902,2022YFB3804900)the National Natural Science Foundation of China(52203226,52161145406,42376045)the Fundamental Research Funds for the Central Universities(2232024Y-01,2232025D-02).
文摘While desalination is a key solution for global freshwater scarcity,its implementation faces environmental challenges due to concentrated brine byproducts mainly disposed of via coastal discharge systems.Solar interfacial evaporation offers sustainable management potential,yet inevitable salt nucleation at evaporation interfaces degrades photothermal conversion and operational stability via light scattering and pathway blockage.Inspired by the mangrove leaf,we propose a photothermal 3D polydopamine and polypyrrole polymerized spacer fabric(PPSF)-based upward hanging model evaporation configuration with a reverse water feeding mechanism.This design enables zero-liquiddischarge(ZLD)desalination through phase-separation crystallization.The interconnected porous architecture and the rough surface of the PPSF enable superior water transport,achieving excellent solar-absorbing efficiency of 97.8%.By adjusting the tilt angle(θ),the evaporator separates the evaporation and salt crystallization zones via controlled capillary-driven brine transport,minimizing heat dissipation from brine discharge.At an optimal tilt angle of 52°,the evaporator reaches an evaporation rate of 2.81 kg m^(−2) h^(−1) with minimal heat loss(0.366 W)under 1-sun illumination while treating a 7 wt%waste brine solution.Furthermore,it sustains an evaporation rate of 2.71 kg m^(−2) h^(−1) over 72 h while ensuring efficient salt recovery.These results highlight a scalable,energy-efficient approach for sustainable ZLD desalination.
基金supported by the National Natural Science Foundation of China(No.12205165)Hebei Province Innovation Ability Improvement Plan Project(No.225676111H).
文摘Structural engineering of Pt-based nanoalloys is crucial for the rational design and manufacturing of high-performance and low-cost electrocatalysts for hydrogen evolution reaction(HER).Here,we reported PtNi nanoparticles with a refined size of 2.71 nm and regular strains loaded on carbon black,synthesized using the high-temperature liquid shock(HTLS)method.This approach offers significant advantages over conventional synthesis methods,including high scalability,rapid reaction rates,and precise control over the size and shape of nanocrystals.Importantly,the synthesized PtNi electrocatalysts demonstrate outstanding catalytic activity and long-term stability for HER,achieving low overpotentials of 19 and 203 mV at current densities of 10 and 1000 mA/cm^(2),respectively.The superior performance can be attributed to the combination of a refined particle size,lattice strains,and synergistic effects between Pt and Ni.This rapid liquid-state synthesis demonstrated here holds great potential for scalable and industrial manufacturing of micro-/nano-catalysts.
基金co-supported by the National Key R&D Program of China(Nos.2020YFC2201103 and 2022YFB4601300)the National Natural Science Foundation of China(No.U22B20120)+1 种基金the Program of Beijing Engineering Research Center of Efficient and Green Aerospace Propulsion Technology,China(No.Lab ASP-2024-09)the Beijing Institute of Technology Research Fund Program for Young Scholars,China。
文摘Porous ionic liquid electrospray thrusters are the ideal propulsion technology for CubeSats because of their structural simplicity,high thrust accuracy and plume self-neutralization.The electrowetting technology can replenish the propellant for the emitter online,thus prolonging the lifetime of the thruster.In order to gain a deeper understanding of its operating characteristics,the changes in thruster performance before and after propellant replenishment deserve to be scrutinized.In this study,the performance changes of a porous electrowetting ionic liquid electrospray thruster are tested by voltage-current test and time-of-flight mass spectrometry over a long operating time.The experimental results show that asymmetric operation with a negative current less than positive current for a long period of time causes anions to compensate for the emission after accumulation at the emitter,resulting in a phenomenon that the negative current is much larger than positive current.The reason for the difference in emission characteristics between the positive and negative modes is that the plume in the positive mode is quite ionized while the plume in the negative mode contains liquid droplets.This study provides a reference for the selection of operating conditions for ionic liquid electrospray thrusters.
基金supported by the Natural Science BasicResearch Program of Shaanxi,China(No.2021JC-14)。
文摘The water hammer problem is an important issue in the dynamics of liquid propulsion system.This paper aims to use the Lattice Boltzmann Method(LBM)with entropy limiter to study the water hammer problems in propellant feedlines.The dynamic characteristics of valve-closing water hammer and filling water hammer are investigated by this method,and the sensitivity of filling water hammer is analyzed with a single factor sensitivity analysis with 8 factors and 9 levels and a multi-factor sensitivity analysis with L_(27)(3^(13))orthogonal experiment based on range method.It is found that the solving result of LBM with entropy limiter is basically in good agreement with finite volume method,and using the entropy limiter can eliminate numerical oscillations when solving valve-closing water hammer problems and solve the numerical"blow up"when solving filling water hammer problems.It can be seen that the dynamic characteristics of valve-closing water hammer are relatively simple,while there are many factors that affect the filling water hammer and the degree of these effects varies.The effects on the maximum water hammer pressure are relatively uniform,but those on the water hammer response time vary greatly through the skewness analysis.
文摘The radiative heat flux of the plume from reusable rockets is a critical parameter during the launch and return processes.This paper proposes a method for calculating radiative heat flux with higher accuracy than previously reported for a recoverable nine-engine liquid-propellant rocket.Based on the Radiative Transfer Equation(RTE),this study employs the discrete transfer method to solve the transient RTE problem using physical properties to describe the problem while avoiding the need to directly solve mathematical equations.The proposed method can effectively determine the radiative heat flux of the flow field and is applicable to problems involving various geometries.Calculations reveal that during the ascent phase of the rocket,the radiative heat flux at the base of the vehicle reaches its maximum in the initial stages of the lift-off,reaching a maximum of~50 kW/m^(2),which is 2.24 times the maximum value during the return phase.During the deceleration stage of re-entry into the atmosphere,the maximum radiative heat flux recorded on the sidewall of the rocket is 29.1 kW/m^(2);the maximum heat flux on the bottom surface is approximately 22.3 kW/m^(2),accounting for 76.6%of that on the rocket's sidewall.This provides a basis for the thermal protection design of the rocket's bottom and walls as well as for the thermal management of cryogenic propellant tanks.Future research will involve ground engine testing and flight experiments to further validate the proposed model.
基金supported by the National Natural Science Foundation of China (Nos.22064020,22364022,and 22174125)the Applied Basic Research Foundation of Yunnan Province (Nos.202101AT070101 and 202201AT070029)。
文摘Developing a chiral material as versatile and universal chiral stationary phase(CSP) for chiral separation in diverse chromatographic techniques simultaneously is of great significance.In this study,we demonstrated for the first time that a chiral metal-organic cage(MOC),[Zn_(6)M_(4)],as a universal chiral recognition material for both multi-mode high-performance liquid chromatography(HPLC) and capillary gas chromatography(GC) enantioseparation.Two novel HPLC CSPs with different bonding arms(CSP-A with a cationic imidazolium bonding arm and CSP-B with an alkyl chain bonding arm) were prepared by clicking of functionalized chiral MOC [Zn_(6)M_(4)] onto thiolated silica via thiol-ene click chemistry.Meanwhile,a capillary GC column statically coated with the chiral MOC [Zn_(6)M_(4)] was also fabricated.The results showed that the chiral MOC exhibits excellent enantioselectivity not only in normal phase HPLC(NP-HPLC) and reversed phase(RP-HPLC) but also in GC,and various racemates were well separated,including alcohols,diols,esters,ketones,ethers,amines,and epoxides.Importantly,CSP-A and CSP-B are complementary to commercially available Chiralcel OD-H and Chiralpak AD-H columns in enantioseparation,which can separate some racemates that could not be or could not well be separated by the two widely used commercial columns,suggesting the great potential of the two prepared CSPs in enantioseparation.This work reveals that the chiral MOC is potential versatile chiral recognition materials for both HPLC and GC,and also paves the way to expand the potential applications of MOCs.
基金supported by PetroChina Coalbed Methane Co.,Ltd.
文摘With the maturation of coalbed methane(CBM)exploitation and the transition into the late stages of dewatering and gas production,liquid loading in gathering pipelines has emerged as a major constraint on productivity and operational stability.Based on real-time field data and gas-liquid physicochemical analyses,this study elucidates the mechanisms governing liquid loading formation under varying temperature,pressure,and water saturation conditions.An HYSYS model is employed to determine the water dew point,while the Turner model is used to evaluate the critical conditions for liquid holdup.The results indicate that gas water saturation exerts the dominant influence on liquid loading risk,followed by pressure,whereas temperature plays a comparatively minor role.When water saturation exceeds 2%and the operating temperature falls below the dew point,condensation-driven liquid loading increases sharply.To further characterize the spatial distribution of liquid accumulation,a steady-state OLGA model of a DN100 gathering pipeline network is developed to examine the effects of pipe diameter,water saturation,and soil temperature.The simulations show that larger pipe diameters and higher water saturation significantly aggravate liquid holdup,while elevated soil temperature mitigates liquid accumulation.Moreover,the liquid holdup ratio is found to correlate closely with flow regime transitions,confirming its suitability as a key indicator of liquid loading risk.Based on these findings,optimization strategies for pipeline design and operation are proposed.To mitigate liquid loading,the gathering pipeline velocity should be maintained above the critical value of 1.63 m/s,and the gas water content should be strictly controlled below 2%.Under operating conditions representative of the Hancheng block,it is recommended to reduce the pipeline diameter from DN130 to DN100 to enhance self-cleaning capacity.In addition,thermal insulation should be applied during winter operation to maintain the pipe wall temperature above 10◦C,thereby suppressing condensation-induced liquid accumulation.
基金supported by Yuelushan Laboratory Breeding Program(Grant No.YLS-2025-ZY02013)The Project of National Key Laboratory for Tropical Crop Breeding(Grant No.NKLTCB202341)+4 种基金The New Variety Breeding Project of the Major Science and Technology Projects of Zhejiang(Grant No.2021C02065-1-3)Hunan Provincial Agricultural Science and Technology Innovation Fund Project(Grant No.2025CX115)Key R&D Projects in Hainan Province(Grant No.ZDYF2023XDNY041)Central Public-interest Scientific Institution Basal Research Fund(Grant No.1630062022003)2024 Sanya Technology Stars Program(Grant No.2024KJFX022).
文摘Eggplant(Solanum melongena L.)is a globally important vegetable crop,renowned for its nutritional value and economic significance.It is abundant in bioactive compounds such as anthocyanins and chlorogenic acid,which have been associated with multiple health-promoting properties(Azuma et al.,2008;Gurbuz et al.,2018).Given its significant hybrid vigor,F1 hybrid varieties are widely preferred in commercial cultivation(Mistry et al.,2018).However,traditional breeding practices predominantly rely on phenotypic selection,a process that is not only labor-intensive but also time-consuming.
