The present study aims at investigating the effect of temperature variation due to heat transfer between the formation and drilling fluids considering influx from the reservoir in the underbalanced drilling condition....The present study aims at investigating the effect of temperature variation due to heat transfer between the formation and drilling fluids considering influx from the reservoir in the underbalanced drilling condition. Gas-liquid-solid three-phase flow model considering transient thermal interaction with the formation was applied to simulate wellbore fluid to calculate the wellbore temperature and pressure and analyze the influence of different parameters on fluid pressure and temperature distribution in annulus. The results show that the non-isothermal three-phase flow model with thermal consideration gives more accurate prediction of bottom-hole pressure(BHP) compared to other models considering geothermal temperature. Viscous dissipation, the heat produced by friction between the rotating drilling-string and well wall and drill bit drilling, and influx of oil and gas from reservoir have significant impact on the distribution of fluid temperature in the wellbore, which in turn affects the BHP. Bottom-hole fluid temperature decreases with increasing liquid flow rate, circulation time, and specific heat of liquid and gas but it increases with increasing in gas flow rate. It was found that BHP is strongly depended on the gas and liquid flow rates but it has weak dependence on the circulation time and specific heat of liquid and gas. BHP increase with increasing liquid flow rate and decreases with increasing gas flow rate.展开更多
Based on the momentum theorem, the fluid governing equation in a lifting pipe is proposed by use of the method combining theoretical analysis with empirical correlations related to the previous research, and the perfo...Based on the momentum theorem, the fluid governing equation in a lifting pipe is proposed by use of the method combining theoretical analysis with empirical correlations related to the previous research, and the performance of an airlift pump can be clearly characterized by the triangular relationship among the volumetric flux of air, water and solid particles, which are obtained respectively by using numerical calculation. The meso-scale river sand is used as tested particles to examine the theoretical model. Results of the model are compared with the data in three-phase flow obtained prior to the development of the present model, by an independent experimental team that used the physical conditions of the present approach. The analytical error can be controlled within 12% for predicting the volumetric flux of water and is smaller than that （±16%） of transporting solid particles in three-phase flow. The experimental results and computations are in good agreement for air-water two-phase flow within a margin of ±8%. Reasonable agreement justifies the use of the present model for engineering design purposes.展开更多
Stabilizing the interface wave of the molten aluminum(metal)-electrolyte(bath)is beneficial to shorten the anode-cathode distance(ACD)which is critical to the energy saving.A coupled mathematical model was developed t...Stabilizing the interface wave of the molten aluminum(metal)-electrolyte(bath)is beneficial to shorten the anode-cathode distance(ACD)which is critical to the energy saving.A coupled mathematical model was developed to study the impact of the novel cathode protrusion on the molten fluid motion as well as the metal-bath interface deformation.The molten fluid motion in the aluminum reduction ceils is under the combined effect of the electro-magnetic forces(EMFs)and the gas bubbles generated at the anode.A transient inhomogeneous three-phase model(metal-bath-gas bubble)was established in order to calculate more accurate.The results indicate that the metal-bath interface deformation can be reduced significantly by the novel cathode protrusion which is beneficial to the electric energy saving.Besides,The EMFs decreases as a result of the optimizing of the magnetic field due to the novel cathode convex which is an important driving force for the deformation of the interface.In addition,large vortex in the metal flow field is break up into the small vortex by the cathode protrusion and then dissipated due to the viscous force and the hindering effect of the cathode protrusion.The quantity of the vortex as well as the strength of the vortex reduces significantly in the reduction cell with novel cathode protrusion.展开更多
In the hydraulic transporting process of cutter-suction mining natural gas hydrate, when the temperature-pressure equilibrium of gas hydrate is broken, gas hydrates dissociate into gas. As a result, solid-liquid two-p...In the hydraulic transporting process of cutter-suction mining natural gas hydrate, when the temperature-pressure equilibrium of gas hydrate is broken, gas hydrates dissociate into gas. As a result, solid-liquid two-phase flow(hydrate and water) transforms into gas-solid-liquid three-phase flow(methane, hydrate and water) inside the pipeline. The Euler model and CFD-PBM model were used to simulate gas-solid-liquid three-phase flow. Numerical simulation results show that the gas and solid phase gradually accumulate to the center of the pipe. Flow velocity decreases from center to boundary of the pipe along the radial direction. Comparison of numerical simulation results of two models reveals that the flow state simulated by CFD-PBM model is more uniform than that simulated by Euler model, and the main behavior of the bubble is small bubbles coalescence to large one. Comparison of numerical simulation and experimental investigation shows that the values of flow velocity and gas fraction in CFD-PBM model agree with experimental data better than those in Euler model. The proposed PBM model provides a more accurate and effective way to estimate three-phase flow state of transporting gas hydrate within the submarine pipeline.展开更多
Generally, most soil slope failures are induced by rainfall infiltration, a process that involves interactions between the liquid phase, gas phase,and solid skeleton in an unsaturated soil slope. In this study, a loos...Generally, most soil slope failures are induced by rainfall infiltration, a process that involves interactions between the liquid phase, gas phase,and solid skeleton in an unsaturated soil slope. In this study, a loosely coupled liquid-gas-solid three-phase model, linking two numerical codes,TOUGH2/EOS3, which is used for water-air two-phase flow analysis, and FLAC^(3D), which is used for mechanical analysis, was established. The model was validated through a documented water drainage experiment over a sandy column and a comparison of the results with measured data and simulated results from other researchers. The proposed model was used to investigate the features of water-air two-phase flow and stress fields in an unsaturated soil slope during rainfall infiltration. The slope stability analysis was then performed based on the simulated water-air two-phase seepage and stress fields on a given slip surface. The results show that the safety factor for the given slip surface decreases first, then increases, and later decreases until the rainfall stops. Subsequently, a sudden rise occurs. After that, the safety factor decreases continually and reaches its lowest value, and then increases slowly to a steady value. The lowest value does not occur when the rainfall stops, indicating a delayed effect of the safety factor. The variations of the safety factor for the given slip surface are therefore caused by a combination of pore-air pressure, matric suction, normal stress, and net normal stress.展开更多
A three-phase confocal elliptical cylinder model is proposed to analyze micromechanics of one-dimensional hexagonal piezoelectric quasicrystal （PQC） compos- ites. Exact solutions of the phonon, phason, and electric ...A three-phase confocal elliptical cylinder model is proposed to analyze micromechanics of one-dimensional hexagonal piezoelectric quasicrystal （PQC） compos- ites. Exact solutions of the phonon, phason, and electric fields are obtained by using the conformal mapping combined with the Laurent expansion technique when the model is subject to far-field anti-plane mechanical and in-plane electric loadings. The effective elec- troelastic constants of several different composites made up of PQC, quasicrystal （QC）, and piezoelectric （PE） materials are predicted by the generalized self-consistent method. Numerical examples are conducted to show the effects of the volume fraction and the cross-sectional shape of inclusion （or fiber） on the effective electroelastic constants of these composites. Compared with other micromechanical methods, the generalized self- consistent and Mori-Tanaka methods can predict the effective electroelastic constants of the composites consistently.展开更多
The gas-liquid-solid three-phase mixed flow is the most general in multiphase mixed transportation. It is significant to exactly solve the coupling hydraulic transient problems of this type of multiphase mixed flow in...The gas-liquid-solid three-phase mixed flow is the most general in multiphase mixed transportation. It is significant to exactly solve the coupling hydraulic transient problems of this type of multiphase mixed flow in pipelines. Presently, the method of characteristics is widely used to solve classical hydraulic transient problems. However, when it is used to solve coupling hydraulic transient problems, excessive interpolation errors may be introduced into the results due to unavoidable multiwave interpolated calculations. To deal with the problem, a finite difference scheme based on the Steger- Warming flux vector splitting is proposed. A flux vector splitting scheme is established for the coupling hydraulic transient model of gas-liquid-solid three-phase mixed flow in the pipelines. The flux subvectors are then discretized by the Lax-Wendroff central difference scheme and the Warming-Beam upwind difference scheme with second-order precision in both time and space. Under the Rankine-Hugoniot conditions and the corresponding boundary conditions, an effective solution to those points located at the boundaries is developed, which can avoid the problem beyond the calculation region directly induced by the second-order discrete technique. Numerical and experimental verifications indicate that the proposed scheme has several desirable advantages including high calculation precision, excellent shock wave capture capability without false numerical oscillation, low sensitivity to the Courant number, and good stability.展开更多
By means of the computational fluid dynamics software Fluent 6.3, a mathematical model of three-dimensional three-phase fluid flow field in the molten bath of electric arc furnace （EAF） with side accessorial oxygen ...By means of the computational fluid dynamics software Fluent 6.3, a mathematical model of three-dimensional three-phase fluid flow field in the molten bath of electric arc furnace （EAF） with side accessorial oxygen lances was developed to study the transient phenomena of oxygen jet impingement on the molten steel and the molten slag. The water modeling experiment was carried out to verify the simulation results. The impingement of the supersonic oxygen jet caused impact dent on the molten steel surface accordingly. The area of impact dent changed almost in linear relationship to flow rate of oxygen jet, which can be expressed by a deduced mathematical equation. And the relationship between the impact force of oxygen iet and the correspondingly formed apparent static pressure on molten bath was obtained, which was in linear relationship and a direct proportion, and can also be expressed by a deduced mathematical equation.展开更多
We investigate the dynamic characteristics of oil-gas-water three-phase flow in terms of chaotic attractor comparison. In particular, we extract a statistic to characterize the dynamical difference in attractor probab...We investigate the dynamic characteristics of oil-gas-water three-phase flow in terms of chaotic attractor comparison. In particular, we extract a statistic to characterize the dynamical difference in attractor probability distribution. We first take time series from Logistic chaotic system with different parameters as examples to demonstrate the effectiveness of the method. Then we use this method to investigate the experimental signals from oil-gas-water three-phase flow. The results indicate that the extracted statistic is very sensitive to the change of flow parameters and can gain a quantitatively insight into the dynamic characteristics of different flow patterns.展开更多
Based on the conductance fluctuation signals measured from vertical upward oil-gas-water three-phase flow experiment, time frequency representation and surrogate data method were used to investigate dynamical characte...Based on the conductance fluctuation signals measured from vertical upward oil-gas-water three-phase flow experiment, time frequency representation and surrogate data method were used to investigate dynamical characteristics of oil-in-water type bubble and slug flows. The results indicate that oil-in-water type bubble flow will turn to deterministic motion with the increase of oil phase fraction f o and superficial gas velocity U sg under fixed flowrate of oil-water mixture Q mix . The dynamics of oil-in-water type slug flow becomes more complex with the increase of U sg under fixed flowrate of oil-water mixture. The change of f o leads to irregular influence on the dynamics of slug flow. These interesting findings suggest that the surrogate data method can be a faithful tool for characterizing dynamic characteristics of oil-in-water type bubble and slug flows.展开更多
The cooling channel process is a rehocasting method by which the prematerial with globular microstructure can be produced to fit the thixocasting process.A three-phase model based on volume averaging approach is propo...The cooling channel process is a rehocasting method by which the prematerial with globular microstructure can be produced to fit the thixocasting process.A three-phase model based on volume averaging approach is proposed to simulate the cooling channel process of A356 Aluminum alloy.The three phases are liquid,solid and air respectively and treated as separated and interacting continua,sharing a single pressure field.The mass,momentum,enthalpy transport equations for each phase are solved.The developed model can predict the evolution of liquid,solid and air fraction as well as the distribution of grain density and grain size.The effect of pouring temperature on the grain density,grain size and solid fraction is analyzed in detail.展开更多
Finite-control-set model predictive control(FCSMPC)has advantages of multi-objective optimization and easy implementation.To reduce the computational burden and switching frequency,this article proposed a simplified M...Finite-control-set model predictive control(FCSMPC)has advantages of multi-objective optimization and easy implementation.To reduce the computational burden and switching frequency,this article proposed a simplified MPC for dual three-phase permanent magnet synchronous motor(DTPPMSM).The novelty of this method is the decomposition of prediction function and the switching optimization algorithm.Based on the decomposition of prediction function,the current increment vector is obtained,which is employed to select the optimal voltage vector and calculate the duty cycle.Then,the computation burden can be reduced and the current tracking performance can be maintained.Additionally,the switching optimization algorithm was proposed to optimize the voltage vector action sequence,which results in lower switching frequency.Hence,this control strategy can not only reduce the computation burden and switching frequency,but also maintain the steady-state and dynamic performance.The simulation and experimental results are presented to verify the feasibility of the proposed strategy.展开更多
The paper presents an accurate analytical subdomain model for predicting the electromagnetic performance in the symmetrical dual three-phase surface-mounted permanent magnet synchronous machine(PMSM)under open-phase f...The paper presents an accurate analytical subdomain model for predicting the electromagnetic performance in the symmetrical dual three-phase surface-mounted permanent magnet synchronous machine(PMSM)under open-phase faulty conditions.The model derivations are extended from previous accurate subdomain models accounting for slotting effects.Compared with most conventional subdomain models for traditional three-phase machines with nonoverlapping winding arrangement,the subdomain model proposed in this paper applied for the 24-slot/4-pole dual three-phase machine with symmetrical overlapping winding arrangement.In order to investigate the postfault electromagnetic performance,the reconfigured phase currents and then current density distribution in stator slots under different open-circuit conditions are discussed.According to the developed model and postfault current density distribution,the steady-state electromagnetic performance,such as the electromagnetic torque and unbalanced magnetic force,under open-circuit faulty conditions are obtained.For validation purposes,finite element analysis(FEA)is employed to validate the analytical results.The result indicate that the postfault electromagnet performance can be accurately predicted by the proposed subdomain model,which is in good agreement with FEA results.展开更多
A novel deceleration traffic flow model is established based on the oscillatory congested states and the slow-tostart rule.The novel model considers human overreaction and mechanical restrictions as limited decelerati...A novel deceleration traffic flow model is established based on the oscillatory congested states and the slow-tostart rule.The novel model considers human overreaction and mechanical restrictions as limited deceleration capacity,effectively avoiding the unrealistic deceleration behavior found in most existing traffic flow models.In order to consider that the acceleration of a stationary vehicle is slower than that of a moving vehicle due to reasons such as driver inattention,the slow-to-start rule is introduced.In actual traffic,the driver will take different deceleration measures according to local traffic conditions,divided into ordinary and emergency deceleration.The deceleration setting in the deceleration model with only ordinary deceleration is modified.Computer simulations show that the novel model can achieve smooth,comfortable acceleration and deceleration behavior.Introducing the slow-to-start rule can realize the first-order transition from free flow to synchronized flow.The oscillatory congested states enable a first-order transition from synchronized flow to wide moving jam.Under periodic boundary conditions,the novel model can reproduce three traffic flow phases(free flow,synchronized flow,and wide moving jam)and two first-order transitions between three phases.In addition,the novel model can reproduce empirical results such as linear synchronized flow and headway distribution of free flow below 1 s.Under open boundary conditions,different congested patterns caused by on-ramps are analyzed.Compared with the classic deceleration model,this model can better reproduce the phenomenon and characteristics of actual traffic flow and provide more accurate decision support for daily traffic management of expressways.展开更多
The phenomenological and physically based models,using the true stress–true strain curve data obtained under various hot working conditions of 850–1200°C and 0.001–10 s−1,were developed and improved for AerMet...The phenomenological and physically based models,using the true stress–true strain curve data obtained under various hot working conditions of 850–1200°C and 0.001–10 s−1,were developed and improved for AerMet 100 ultra-high strength steel.The predictability of the developed constitutive models was verified and compared.The determination coefficient and average absolute relative error were 0.9988 and 3.72%for the improved version of the modified Zerilli–Armstrong model,0.9985 and 3.96%for the improved version of the modified Johnson–Cook model,0.9947 and 4.59%for the strain-compensated Arrhenius-type model and 0.9913 and 5.43%for the improved Khan–Huang–Liang model,respectively.The results showed that the improved versions of the modified Zerilli–Armstrong model have the best predictability among the studied constitutive models.Comparing the predictability before and after the improvement,the average absolute relative error was increased by 65.14%for the modified Zerilli–Armstrong model and 58.45%for the modified Johnson–Cook model.This indicates that the phenomenological improvement of physically based constitutive models allows us to develop effectively constitutive equations with high prediction accuracy.展开更多
The effect of alcoholic polyethylene-vinyl acetate(EVA)product ethylene-vinyl alcohol copolymer(EVAL)on the low-temperature flow properties of model oil containing asphaltene(ASP)was investigated.The change of wax cry...The effect of alcoholic polyethylene-vinyl acetate(EVA)product ethylene-vinyl alcohol copolymer(EVAL)on the low-temperature flow properties of model oil containing asphaltene(ASP)was investigated.The change of wax crystal microscopic morphology of model oil before and after modification were examined,and the influence of asphaltene mass fraction on the rheological improvement effect of EVAL was analyzed.The composite system of EVAL and asphaltene significantly reduced the pour point,gel point,apparent viscosity,storage modulus and loss modulus of waxy oil at low temperatures.When the EVAL concentration is 400 ppm and the asphaltene mass fraction is 0.5 wt%,the synergistic effect of the two is optimal,which can reduce the pour point by 17℃and the modulus value by more than 98%.The introduction of EVAL strengthens the interaction between asphaltenes and wax crystals,forming EVALASP aggregates,which promote the adsorption of wax crystals on asphaltenes to form composite particles,and the polar groups prevent the aggregation of wax crystals and reduce the size of wax crystals,thus greatly improving the fluidity of waxy oils.展开更多
Three-sphase flow invo1ving oil-water two immiscible liquids and gas which is often foundin the fields of petroleum production has been studied in this paper.A new method with thecombination of a horizontal tube,a dow...Three-sphase flow invo1ving oil-water two immiscible liquids and gas which is often foundin the fields of petroleum production has been studied in this paper.A new method with thecombination of a horizontal tube,a downward flow vertica1 tube and an orifice to measure theflowrates is presented.In this method the frictional pressure drop in the downward vertical tube isreplaced by that in the horizontal tube,the void fraction is derived from the gravitational pressuredrop,then the volume fraction of the individual phase can also be obtained.The individual flowratescan be calculated when the water fraction is known.This method is applicable for many kinds ofoil-wells to measure the flowrates of crude oil,natural gas and water.Compared with other methods,the presented method involves fewer measuring parameters.The experimental results proved quitegood accuracy of the method,with measurement deviation within 10%,and reliable results wereobtained under high Dressure conditions.展开更多
Background:Pulmonary hypertension(PH)is a life-threatening condition that can be triggered by pulmonary thromboembolism(PTE),which causes abrupt increases in pulmonary artery pressure and resistance.Although Doppler e...Background:Pulmonary hypertension(PH)is a life-threatening condition that can be triggered by pulmonary thromboembolism(PTE),which causes abrupt increases in pulmonary artery pressure and resistance.Although Doppler echocardiography is a useful screening tool,its ability to accurately reflect rapid hemodynamic changes during acute PTE remains limited.The Flowire catheter allows for real-time assessment of intravascular flow and may offer better insight into these changes.Aims:The aims were to investigate changes in pulmonary artery hemodynamics measured using a Flowire catheter and to validate the accuracy of Doppler echocardiography in assessing these changes in dogs with acute pulmonary thromboembolism(PTE).Methods:Hemodynamic and echocardiographic data were obtained from 10 anesthetized female beagles using a Flowire catheter and echocardiography at three preload conditions:baseline,bolus loading,and an acute pulmonary hypertension state induced by a 300-μm dextran microsphere injection.Results:With increases in pulmonary artery pressure and pulmonary vascular resistance,the proximal and distal pulmonary artery flow peak measured using the Flowire catheter significantly decreased during the acute pulmonary hypertension period.Echocardiography did not accurately capture these hemodynamic changes and tended to overestimate pulmonary artery flow peak in the distal pulmonary artery.Conclusion:Doppler echocardiography has limitations in accurately reflecting complex hemodynamic changes during acute PTE.In contrast,Flowire catheterization provides additional and precise local hemodynamic information.展开更多
Long-duration energy storage has become critical for renewable energy integration.While redox flow batteries,especially vanadium-based systems,are scaling up in capacity,their performance at the stack level remains in...Long-duration energy storage has become critical for renewable energy integration.While redox flow batteries,especially vanadium-based systems,are scaling up in capacity,their performance at the stack level remains insufficiently optimized,demanding more profound mechanistic studies and engineering refinements.To address the difficulties in resolving the flow inhomogeneity at the stack scale,this study establishes a multi-physics field coupling model and analyzes the pressure distributions,flow rate differences,active substance concentration,and electrochemical characteristics.The results show that the uneven cell pressure distribution is a key factor affecting the consistency of the system performance,and the increase in the flow rate improves the reactant homogeneity,with both the average concentration and the uniformity factor increasing with the flow rate.In contrast,high current densities lead to an increased imbalance between electrochemical depletion and reactant replenishment,resulting in a significant decrease in reactant concentration in the under-ribs region.In addition,a higher flow rate can expand the high-current-density region where the stack operates efficiently.This study provides a theoretical basis for optimizing the design of the stack components.展开更多
Electrochemical impedance spectroscopy(EIS)is a robust characterization method to probe prevalent(electro)chemical processes in an electrochemical system.Despite its extensive utilization in fuel cell research,the app...Electrochemical impedance spectroscopy(EIS)is a robust characterization method to probe prevalent(electro)chemical processes in an electrochemical system.Despite its extensive utilization in fuel cell research,the application of EIS in redox flow battery systems particularly for simplified two-electrode full-cell configurations is more limited.Herein we attempt to strengthen the understa nding of cha racteristic EIS data of vanadium redox flow batteries by a combination of equivalent circuit modeling with a validated Multiphysics model analyzed under hydrodynamic conditions in frequency domain.Following a highlight of system linearity and stability concerns for EIS in redox flow batteries,we specifically use our combinatory approach to investigate the effects of different cell component properties on observed galva nostatic EIS spectra and accompanying fitted equivalent circuit element parameters.For the investigated two-electrode full-cell flow battery configuration with the same electrode material on both sides,the EIS spectral data is observed to be dominated by different mass or cha rge transport processes at different ends of the spectrum.Sensitivity analyses of both obtained EIS spectral data and fitted circuit elements parameters show that electrode morphological properties,membrane porosity,and electrolyte inflow conditions predominantly define the EIS spectral data.Insights from the type of analyses performed herein can facilitate flow battery cell/stack diagnostics and targeted performance improvement efforts.展开更多
文摘The present study aims at investigating the effect of temperature variation due to heat transfer between the formation and drilling fluids considering influx from the reservoir in the underbalanced drilling condition. Gas-liquid-solid three-phase flow model considering transient thermal interaction with the formation was applied to simulate wellbore fluid to calculate the wellbore temperature and pressure and analyze the influence of different parameters on fluid pressure and temperature distribution in annulus. The results show that the non-isothermal three-phase flow model with thermal consideration gives more accurate prediction of bottom-hole pressure(BHP) compared to other models considering geothermal temperature. Viscous dissipation, the heat produced by friction between the rotating drilling-string and well wall and drill bit drilling, and influx of oil and gas from reservoir have significant impact on the distribution of fluid temperature in the wellbore, which in turn affects the BHP. Bottom-hole fluid temperature decreases with increasing liquid flow rate, circulation time, and specific heat of liquid and gas but it increases with increasing in gas flow rate. It was found that BHP is strongly depended on the gas and liquid flow rates but it has weak dependence on the circulation time and specific heat of liquid and gas. BHP increase with increasing liquid flow rate and decreases with increasing gas flow rate.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.51374101 and 51474158)the National Basic Research Program of China(973 Program,Grant No.2014CB239203)the Scientific Research Project of Education Department of Hunan Province(Grant No.14B047)
文摘Based on the momentum theorem, the fluid governing equation in a lifting pipe is proposed by use of the method combining theoretical analysis with empirical correlations related to the previous research, and the performance of an airlift pump can be clearly characterized by the triangular relationship among the volumetric flux of air, water and solid particles, which are obtained respectively by using numerical calculation. The meso-scale river sand is used as tested particles to examine the theoretical model. Results of the model are compared with the data in three-phase flow obtained prior to the development of the present model, by an independent experimental team that used the physical conditions of the present approach. The analytical error can be controlled within 12% for predicting the volumetric flux of water and is smaller than that （±16%） of transporting solid particles in three-phase flow. The experimental results and computations are in good agreement for air-water two-phase flow within a margin of ±8%. Reasonable agreement justifies the use of the present model for engineering design purposes.
基金Item Sponsored by the National Natural Science Foundation of China[NO.50934005 and NO.50904014]
文摘Stabilizing the interface wave of the molten aluminum(metal)-electrolyte(bath)is beneficial to shorten the anode-cathode distance(ACD)which is critical to the energy saving.A coupled mathematical model was developed to study the impact of the novel cathode protrusion on the molten fluid motion as well as the metal-bath interface deformation.The molten fluid motion in the aluminum reduction ceils is under the combined effect of the electro-magnetic forces(EMFs)and the gas bubbles generated at the anode.A transient inhomogeneous three-phase model(metal-bath-gas bubble)was established in order to calculate more accurate.The results indicate that the metal-bath interface deformation can be reduced significantly by the novel cathode protrusion which is beneficial to the electric energy saving.Besides,The EMFs decreases as a result of the optimizing of the magnetic field due to the novel cathode convex which is an important driving force for the deformation of the interface.In addition,large vortex in the metal flow field is break up into the small vortex by the cathode protrusion and then dissipated due to the viscous force and the hindering effect of the cathode protrusion.The quantity of the vortex as well as the strength of the vortex reduces significantly in the reduction cell with novel cathode protrusion.
基金Project(51375498) supported by the National Natural Science Foundation of China
文摘In the hydraulic transporting process of cutter-suction mining natural gas hydrate, when the temperature-pressure equilibrium of gas hydrate is broken, gas hydrates dissociate into gas. As a result, solid-liquid two-phase flow(hydrate and water) transforms into gas-solid-liquid three-phase flow(methane, hydrate and water) inside the pipeline. The Euler model and CFD-PBM model were used to simulate gas-solid-liquid three-phase flow. Numerical simulation results show that the gas and solid phase gradually accumulate to the center of the pipe. Flow velocity decreases from center to boundary of the pipe along the radial direction. Comparison of numerical simulation results of two models reveals that the flow state simulated by CFD-PBM model is more uniform than that simulated by Euler model, and the main behavior of the bubble is small bubbles coalescence to large one. Comparison of numerical simulation and experimental investigation shows that the values of flow velocity and gas fraction in CFD-PBM model agree with experimental data better than those in Euler model. The proposed PBM model provides a more accurate and effective way to estimate three-phase flow state of transporting gas hydrate within the submarine pipeline.
基金supported by the National Natural Science Foundation of China(Grants No.51579170 and 51179118)the Science Fund for Creative Research Groups of the National Natural Science Foundation of China(Grant No.51321065)
文摘Generally, most soil slope failures are induced by rainfall infiltration, a process that involves interactions between the liquid phase, gas phase,and solid skeleton in an unsaturated soil slope. In this study, a loosely coupled liquid-gas-solid three-phase model, linking two numerical codes,TOUGH2/EOS3, which is used for water-air two-phase flow analysis, and FLAC^(3D), which is used for mechanical analysis, was established. The model was validated through a documented water drainage experiment over a sandy column and a comparison of the results with measured data and simulated results from other researchers. The proposed model was used to investigate the features of water-air two-phase flow and stress fields in an unsaturated soil slope during rainfall infiltration. The slope stability analysis was then performed based on the simulated water-air two-phase seepage and stress fields on a given slip surface. The results show that the safety factor for the given slip surface decreases first, then increases, and later decreases until the rainfall stops. Subsequently, a sudden rise occurs. After that, the safety factor decreases continually and reaches its lowest value, and then increases slowly to a steady value. The lowest value does not occur when the rainfall stops, indicating a delayed effect of the safety factor. The variations of the safety factor for the given slip surface are therefore caused by a combination of pore-air pressure, matric suction, normal stress, and net normal stress.
基金Projected supported by the National Natural Science Foundation of China(Nos.11502123 and11262012)the Natural Science Foundation of Inner Mongolia Autonomous Region of China(No.2015JQ01)
文摘A three-phase confocal elliptical cylinder model is proposed to analyze micromechanics of one-dimensional hexagonal piezoelectric quasicrystal （PQC） compos- ites. Exact solutions of the phonon, phason, and electric fields are obtained by using the conformal mapping combined with the Laurent expansion technique when the model is subject to far-field anti-plane mechanical and in-plane electric loadings. The effective elec- troelastic constants of several different composites made up of PQC, quasicrystal （QC）, and piezoelectric （PE） materials are predicted by the generalized self-consistent method. Numerical examples are conducted to show the effects of the volume fraction and the cross-sectional shape of inclusion （or fiber） on the effective electroelastic constants of these composites. Compared with other micromechanical methods, the generalized self- consistent and Mori-Tanaka methods can predict the effective electroelastic constants of the composites consistently.
基金supported by the Natural Science Foundation Project of CQ CSTC (No. 2010BB7421)
文摘The gas-liquid-solid three-phase mixed flow is the most general in multiphase mixed transportation. It is significant to exactly solve the coupling hydraulic transient problems of this type of multiphase mixed flow in pipelines. Presently, the method of characteristics is widely used to solve classical hydraulic transient problems. However, when it is used to solve coupling hydraulic transient problems, excessive interpolation errors may be introduced into the results due to unavoidable multiwave interpolated calculations. To deal with the problem, a finite difference scheme based on the Steger- Warming flux vector splitting is proposed. A flux vector splitting scheme is established for the coupling hydraulic transient model of gas-liquid-solid three-phase mixed flow in the pipelines. The flux subvectors are then discretized by the Lax-Wendroff central difference scheme and the Warming-Beam upwind difference scheme with second-order precision in both time and space. Under the Rankine-Hugoniot conditions and the corresponding boundary conditions, an effective solution to those points located at the boundaries is developed, which can avoid the problem beyond the calculation region directly induced by the second-order discrete technique. Numerical and experimental verifications indicate that the proposed scheme has several desirable advantages including high calculation precision, excellent shock wave capture capability without false numerical oscillation, low sensitivity to the Courant number, and good stability.
基金Sponsored by National Key Technology Research and Development Program in 11th Five-year Plan of China(2008AF33B01)Fuzhou University Foundation for Development of Science and Technology of China(0020-600588)
文摘By means of the computational fluid dynamics software Fluent 6.3, a mathematical model of three-dimensional three-phase fluid flow field in the molten bath of electric arc furnace （EAF） with side accessorial oxygen lances was developed to study the transient phenomena of oxygen jet impingement on the molten steel and the molten slag. The water modeling experiment was carried out to verify the simulation results. The impingement of the supersonic oxygen jet caused impact dent on the molten steel surface accordingly. The area of impact dent changed almost in linear relationship to flow rate of oxygen jet, which can be expressed by a deduced mathematical equation. And the relationship between the impact force of oxygen iet and the correspondingly formed apparent static pressure on molten bath was obtained, which was in linear relationship and a direct proportion, and can also be expressed by a deduced mathematical equation.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.41174109 and 61104148)the National Science and Technology Major Project of the Ministry of Science and Technology of China(Grant No.2011ZX05020-006)the Tianjin City High School Science and Technology Fund Planning Project,China(Grant No.20130718)
文摘We investigate the dynamic characteristics of oil-gas-water three-phase flow in terms of chaotic attractor comparison. In particular, we extract a statistic to characterize the dynamical difference in attractor probability distribution. We first take time series from Logistic chaotic system with different parameters as examples to demonstrate the effectiveness of the method. Then we use this method to investigate the experimental signals from oil-gas-water three-phase flow. The results indicate that the extracted statistic is very sensitive to the change of flow parameters and can gain a quantitatively insight into the dynamic characteristics of different flow patterns.
基金Supported by the National Natural Science Foundation of China (50974095, 41174109)Gao Zhongke (高忠科) was also supported by the National Natural Science Foundation of China (61104148)+2 种基金the National Science and Technology Major Projects (2011ZX05020-006)Specialized Research Fund for the Doctoral Program of Higher Education of China(20110032120088)the Independent Innovation Foundation of Tianjin University
文摘Based on the conductance fluctuation signals measured from vertical upward oil-gas-water three-phase flow experiment, time frequency representation and surrogate data method were used to investigate dynamical characteristics of oil-in-water type bubble and slug flows. The results indicate that oil-in-water type bubble flow will turn to deterministic motion with the increase of oil phase fraction f o and superficial gas velocity U sg under fixed flowrate of oil-water mixture Q mix . The dynamics of oil-in-water type slug flow becomes more complex with the increase of U sg under fixed flowrate of oil-water mixture. The change of f o leads to irregular influence on the dynamics of slug flow. These interesting findings suggest that the surrogate data method can be a faithful tool for characterizing dynamic characteristics of oil-in-water type bubble and slug flows.
文摘The cooling channel process is a rehocasting method by which the prematerial with globular microstructure can be produced to fit the thixocasting process.A three-phase model based on volume averaging approach is proposed to simulate the cooling channel process of A356 Aluminum alloy.The three phases are liquid,solid and air respectively and treated as separated and interacting continua,sharing a single pressure field.The mass,momentum,enthalpy transport equations for each phase are solved.The developed model can predict the evolution of liquid,solid and air fraction as well as the distribution of grain density and grain size.The effect of pouring temperature on the grain density,grain size and solid fraction is analyzed in detail.
基金supported by the National Natural Science Foundation of China under Grant 5227705。
文摘Finite-control-set model predictive control(FCSMPC)has advantages of multi-objective optimization and easy implementation.To reduce the computational burden and switching frequency,this article proposed a simplified MPC for dual three-phase permanent magnet synchronous motor(DTPPMSM).The novelty of this method is the decomposition of prediction function and the switching optimization algorithm.Based on the decomposition of prediction function,the current increment vector is obtained,which is employed to select the optimal voltage vector and calculate the duty cycle.Then,the computation burden can be reduced and the current tracking performance can be maintained.Additionally,the switching optimization algorithm was proposed to optimize the voltage vector action sequence,which results in lower switching frequency.Hence,this control strategy can not only reduce the computation burden and switching frequency,but also maintain the steady-state and dynamic performance.The simulation and experimental results are presented to verify the feasibility of the proposed strategy.
基金supported in part by National Natural Science Foundation of China(NSFC)under Project No.51737010in part by State Key Laboratory of Electrical Insulation and Power Equipment(EIPE19109)。
文摘The paper presents an accurate analytical subdomain model for predicting the electromagnetic performance in the symmetrical dual three-phase surface-mounted permanent magnet synchronous machine(PMSM)under open-phase faulty conditions.The model derivations are extended from previous accurate subdomain models accounting for slotting effects.Compared with most conventional subdomain models for traditional three-phase machines with nonoverlapping winding arrangement,the subdomain model proposed in this paper applied for the 24-slot/4-pole dual three-phase machine with symmetrical overlapping winding arrangement.In order to investigate the postfault electromagnetic performance,the reconfigured phase currents and then current density distribution in stator slots under different open-circuit conditions are discussed.According to the developed model and postfault current density distribution,the steady-state electromagnetic performance,such as the electromagnetic torque and unbalanced magnetic force,under open-circuit faulty conditions are obtained.For validation purposes,finite element analysis(FEA)is employed to validate the analytical results.The result indicate that the postfault electromagnet performance can be accurately predicted by the proposed subdomain model,which is in good agreement with FEA results.
基金supported by the National Natural Science Foundation of China(Grant No.71671109)the National Key Research and Development Program of China(Grant No.2020YFB1600500)the Key Research and Development Program of Heilongjiang Province,China(Grant No.GZ20220089)。
文摘A novel deceleration traffic flow model is established based on the oscillatory congested states and the slow-tostart rule.The novel model considers human overreaction and mechanical restrictions as limited deceleration capacity,effectively avoiding the unrealistic deceleration behavior found in most existing traffic flow models.In order to consider that the acceleration of a stationary vehicle is slower than that of a moving vehicle due to reasons such as driver inattention,the slow-to-start rule is introduced.In actual traffic,the driver will take different deceleration measures according to local traffic conditions,divided into ordinary and emergency deceleration.The deceleration setting in the deceleration model with only ordinary deceleration is modified.Computer simulations show that the novel model can achieve smooth,comfortable acceleration and deceleration behavior.Introducing the slow-to-start rule can realize the first-order transition from free flow to synchronized flow.The oscillatory congested states enable a first-order transition from synchronized flow to wide moving jam.Under periodic boundary conditions,the novel model can reproduce three traffic flow phases(free flow,synchronized flow,and wide moving jam)and two first-order transitions between three phases.In addition,the novel model can reproduce empirical results such as linear synchronized flow and headway distribution of free flow below 1 s.Under open boundary conditions,different congested patterns caused by on-ramps are analyzed.Compared with the classic deceleration model,this model can better reproduce the phenomenon and characteristics of actual traffic flow and provide more accurate decision support for daily traffic management of expressways.
基金support from the Central Research Fund of Kim Chaek University of Technology(MIRAE 2023779).
文摘The phenomenological and physically based models,using the true stress–true strain curve data obtained under various hot working conditions of 850–1200°C and 0.001–10 s−1,were developed and improved for AerMet 100 ultra-high strength steel.The predictability of the developed constitutive models was verified and compared.The determination coefficient and average absolute relative error were 0.9988 and 3.72%for the improved version of the modified Zerilli–Armstrong model,0.9985 and 3.96%for the improved version of the modified Johnson–Cook model,0.9947 and 4.59%for the strain-compensated Arrhenius-type model and 0.9913 and 5.43%for the improved Khan–Huang–Liang model,respectively.The results showed that the improved versions of the modified Zerilli–Armstrong model have the best predictability among the studied constitutive models.Comparing the predictability before and after the improvement,the average absolute relative error was increased by 65.14%for the modified Zerilli–Armstrong model and 58.45%for the modified Johnson–Cook model.This indicates that the phenomenological improvement of physically based constitutive models allows us to develop effectively constitutive equations with high prediction accuracy.
基金financially supported by the National Natural Science Foundation of China(No.52076036)。
文摘The effect of alcoholic polyethylene-vinyl acetate(EVA)product ethylene-vinyl alcohol copolymer(EVAL)on the low-temperature flow properties of model oil containing asphaltene(ASP)was investigated.The change of wax crystal microscopic morphology of model oil before and after modification were examined,and the influence of asphaltene mass fraction on the rheological improvement effect of EVAL was analyzed.The composite system of EVAL and asphaltene significantly reduced the pour point,gel point,apparent viscosity,storage modulus and loss modulus of waxy oil at low temperatures.When the EVAL concentration is 400 ppm and the asphaltene mass fraction is 0.5 wt%,the synergistic effect of the two is optimal,which can reduce the pour point by 17℃and the modulus value by more than 98%.The introduction of EVAL strengthens the interaction between asphaltenes and wax crystals,forming EVALASP aggregates,which promote the adsorption of wax crystals on asphaltenes to form composite particles,and the polar groups prevent the aggregation of wax crystals and reduce the size of wax crystals,thus greatly improving the fluidity of waxy oils.
文摘Three-sphase flow invo1ving oil-water two immiscible liquids and gas which is often foundin the fields of petroleum production has been studied in this paper.A new method with thecombination of a horizontal tube,a downward flow vertica1 tube and an orifice to measure theflowrates is presented.In this method the frictional pressure drop in the downward vertical tube isreplaced by that in the horizontal tube,the void fraction is derived from the gravitational pressuredrop,then the volume fraction of the individual phase can also be obtained.The individual flowratescan be calculated when the water fraction is known.This method is applicable for many kinds ofoil-wells to measure the flowrates of crude oil,natural gas and water.Compared with other methods,the presented method involves fewer measuring parameters.The experimental results proved quitegood accuracy of the method,with measurement deviation within 10%,and reliable results wereobtained under high Dressure conditions.
基金Japan Society for the Promotion of Science,Grant/Award Number:JSPS KAKENHI 24K18010。
文摘Background:Pulmonary hypertension(PH)is a life-threatening condition that can be triggered by pulmonary thromboembolism(PTE),which causes abrupt increases in pulmonary artery pressure and resistance.Although Doppler echocardiography is a useful screening tool,its ability to accurately reflect rapid hemodynamic changes during acute PTE remains limited.The Flowire catheter allows for real-time assessment of intravascular flow and may offer better insight into these changes.Aims:The aims were to investigate changes in pulmonary artery hemodynamics measured using a Flowire catheter and to validate the accuracy of Doppler echocardiography in assessing these changes in dogs with acute pulmonary thromboembolism(PTE).Methods:Hemodynamic and echocardiographic data were obtained from 10 anesthetized female beagles using a Flowire catheter and echocardiography at three preload conditions:baseline,bolus loading,and an acute pulmonary hypertension state induced by a 300-μm dextran microsphere injection.Results:With increases in pulmonary artery pressure and pulmonary vascular resistance,the proximal and distal pulmonary artery flow peak measured using the Flowire catheter significantly decreased during the acute pulmonary hypertension period.Echocardiography did not accurately capture these hemodynamic changes and tended to overestimate pulmonary artery flow peak in the distal pulmonary artery.Conclusion:Doppler echocardiography has limitations in accurately reflecting complex hemodynamic changes during acute PTE.In contrast,Flowire catheterization provides additional and precise local hemodynamic information.
基金supported by National Natural Science Foundation of China(No.524B2078,12426307,51906203)Guangdong Major Project of Basic and Applied Basic Research(2023B0303000002)+6 种基金Guangdong Basic and Applied Basic Research Foundation(2023B1515120005)Natural Science Foundation of Shenzhen(JCYJ20241202125327036,JCYJ20240813100103005)Shenzhen Engineering Research Center of Redox Flow Battery for Energy Storage(XMHT20230208003)Research Project on Medium-and Long-Duration Flow Battery Energy Storage Technology(2024KJTW0015)China Association for Science and Technology(OR2308010)High level of special funds(G03034K001)supported by the Center for Computational Science and Engineering at the Southern University of Science and Technology.
文摘Long-duration energy storage has become critical for renewable energy integration.While redox flow batteries,especially vanadium-based systems,are scaling up in capacity,their performance at the stack level remains insufficiently optimized,demanding more profound mechanistic studies and engineering refinements.To address the difficulties in resolving the flow inhomogeneity at the stack scale,this study establishes a multi-physics field coupling model and analyzes the pressure distributions,flow rate differences,active substance concentration,and electrochemical characteristics.The results show that the uneven cell pressure distribution is a key factor affecting the consistency of the system performance,and the increase in the flow rate improves the reactant homogeneity,with both the average concentration and the uniformity factor increasing with the flow rate.In contrast,high current densities lead to an increased imbalance between electrochemical depletion and reactant replenishment,resulting in a significant decrease in reactant concentration in the under-ribs region.In addition,a higher flow rate can expand the high-current-density region where the stack operates efficiently.This study provides a theoretical basis for optimizing the design of the stack components.
基金sponsored by the Dubai Electricity and Water Authority(DEWA)R&D centre,Dubai,United Arab Emirates。
文摘Electrochemical impedance spectroscopy(EIS)is a robust characterization method to probe prevalent(electro)chemical processes in an electrochemical system.Despite its extensive utilization in fuel cell research,the application of EIS in redox flow battery systems particularly for simplified two-electrode full-cell configurations is more limited.Herein we attempt to strengthen the understa nding of cha racteristic EIS data of vanadium redox flow batteries by a combination of equivalent circuit modeling with a validated Multiphysics model analyzed under hydrodynamic conditions in frequency domain.Following a highlight of system linearity and stability concerns for EIS in redox flow batteries,we specifically use our combinatory approach to investigate the effects of different cell component properties on observed galva nostatic EIS spectra and accompanying fitted equivalent circuit element parameters.For the investigated two-electrode full-cell flow battery configuration with the same electrode material on both sides,the EIS spectral data is observed to be dominated by different mass or cha rge transport processes at different ends of the spectrum.Sensitivity analyses of both obtained EIS spectral data and fitted circuit elements parameters show that electrode morphological properties,membrane porosity,and electrolyte inflow conditions predominantly define the EIS spectral data.Insights from the type of analyses performed herein can facilitate flow battery cell/stack diagnostics and targeted performance improvement efforts.
