The transient phenomena of re-oxidation and slag entrapment occurring in the tundish during the ladle change-over process have been proven detrimental to clean steel production.Therefore,an unsteady three-phase turbul...The transient phenomena of re-oxidation and slag entrapment occurring in the tundish during the ladle change-over process have been proven detrimental to clean steel production.Therefore,an unsteady three-phase turbulence model,coupling velocity,temperature,and phase field was established to study the effect of the ladle shroud immersion depth on the slag eye formation,slag entrainment,slag dragging,air dragging,and flow characteristics during the ladle change-over process of a two-strand tundish.The results showed that reducing the immersion depth decreases the high-velocity region area under the slag layer in the quasi-steady process.During the emptying stage,as the molten bath level gradually decreases,the outlet temperature exhibits a trend of initially decreasing and subsequently increasing across all three shroud immersion depths.However,under a 210 mm shroud immersion depth,molten slag and air are dragged into the shroud,forming slag droplets and causing significant fluctuations,with a maximum scalar velocity of 0.0764 m/s at the monitoring point.In the filling stage,air and molten slag are dragged into the molten bath,forming bubbles and slag droplets at an immersion depth of 210 mm.Bubbles are observed within the molten slag layer,which can readily cause an emulsification phenomenon,making it easier to be dragged as slag droplets.Additionally,the slag eye area measured under 210 mm immersion depth at 45 s is 0.303 m^(2),while the maximum scalar velocity of 2.4259 m/s is detected at 12 s.At an immersion depth of 360 mm,the average area of the slag eye is minimized to 0.06268 m2,with corresponding variances of 0.006753,representing the optimal immersion depth.展开更多
The past decade has witnessed the rapid increasement in power conversion efficiency of perovskite solar cells(PSCs).However,serious ion migration hampers their operational stability.Although dopants composed of varied...The past decade has witnessed the rapid increasement in power conversion efficiency of perovskite solar cells(PSCs).However,serious ion migration hampers their operational stability.Although dopants composed of varied cations and anions are introduced into perovskite to suppress ion migration,the impact of cations or anions is not individually explored,which hinders the evaluation of different cations and further application of doping strategy.Here we report that a special group of sulfonic anions(like CF_(3)SO_(3)^(-))successfully introduce alkaline earth ions(like Ca^(2+))into perovskite lattice compared to its halide counterparts.Furthermore,with effective crystallization regulation and defect passivation of sulfonic anions,perovskite with Ca(CF_(3)SO_(3))_(2)shows reduced PbI2 residue and metallic Pb0 defects;thereby,corresponding PSCs show an enhanced PCE of 24.95%.Finally by comparing the properties of perovskite with Ca(CF_(3)SO_(3))_(2)and FACF_(3)SO_(3),we found that doped Ca^(2+)significantly suppressed halide migration with an activation energy of 1.246 eV which accounts for the improved operational stability of Ca(CF_(3)SO_(3))_(2-)doped PSCs,while no obvious impact of Ca^(2+)on trap density is observed.Combining the benefits of cations and anions,this study presents an effective method to decouple the effects of cations and anions and fabricate efficient and stable PSCs.展开更多
Taking three-phase electrode adjusting system of submerged arc furnace as study object which has nonlinear, time-variant, multivariable and strong coupling features, a neural adaptive PSD(proportion, sum and different...Taking three-phase electrode adjusting system of submerged arc furnace as study object which has nonlinear, time-variant, multivariable and strong coupling features, a neural adaptive PSD(proportion, sum and differential) dispersive decoupling controller was developed by combining neural adaptive PSD algorithm with dispersive decoupling network. In this work, the production technology process and control difficulties of submerged arc furnace were simply introduced, the necessity of establishing a neural adaptive PSD dispersive decoupling controller was discussed, the design method and the implementation steps of the controller are expounded in detail, and the block diagram of the controlled system is presented. By comparison with experimental results of the conventional PID controller and the adaptive PSD controller, the decoupling ability, adaptive ability, self-learning ability and robustness of the neural adaptive PSD dispersive decoupling controller have been testified effectively. The controller is applicable to the three-phase electrode adjusting system of submerged arc furnace, and it will play an important role for achieving the power balance of three-phrase electrodes, saving energy and reducing consumption in the process of smelting.展开更多
Multiple functional metasurfaces with high information capacity have attracted considerable attention from researchers.This study proposes a 2-bit tunable spin-decoupled coded metasurface designed for the terahertz ba...Multiple functional metasurfaces with high information capacity have attracted considerable attention from researchers.This study proposes a 2-bit tunable spin-decoupled coded metasurface designed for the terahertz band,which utilizes the tunable properties of Dirac semimetals(DSM)to create a novel multilayer structure.By incorporating both geometric and propagating phases into the metasurface design,we can effectively control the electromagnetic wave.When the Fermi level(EF)of the DSM is set at 6 meV,the electromagnetic wave is manipulated by the gold patch embedded in the DSM film,operating at a frequency of 1.3 THz.When the EF of the DSM is set at 80 meV,the electromagnetic wave is manipulated by the DSM patch,operating at a frequency of 1.4 THz.Both modes enable independent control of beam splitting under left-rotating circularly polarized(LCP)and rightrotating circularly polarized(RCP)wave excitation,resulting in the generation of vortex beams with distinct orbital angular momentum(OAM)modes.The findings of this study hold significant potential for enhancing information capacity and polarization multiplexing techniques in wireless communications.展开更多
Real-time sensory signal monitoring systems are crucial for continuous health tracking and enhancing human-interface technologies in virtual reality/augmented reality applications.Recent advancements in micro/nanofabr...Real-time sensory signal monitoring systems are crucial for continuous health tracking and enhancing human-interface technologies in virtual reality/augmented reality applications.Recent advancements in micro/nanofabrication technologies have enabled wearable and implantable sensors to achieve sufficient sensitivity for measuring subtle sensory signals,while integration with wireless communication technologies allows for real-time monitoring and closed-loop user feedback.However,highly sensitive sensing materials face challenges,as their detection results can easily be altered by external factors such as bending,temperature,and humidity.This review discusses methods for decoupling various stimuli and their applications in human interfaces.We cover the latest advancements in decoupled systems,including the design of sensing materials using micro/nanostructured materials,3-dimensional(3D)sensory system architectures,and Artificial intelligence(AI)-based signal decoupling processing techniques.Additionally,we highlight key applications in robotics,wearable,and implantable health monitoring made possible by these decoupled systems.Finally,we suggest future research directions to address the remaining challenges of developing decoupled artificial sensory systems that are resilient to external stimuli.展开更多
Enforcing initial and boundary conditions(I/BCs)poses challenges in physics-informed neural networks(PINNs).Several PINN studies have gained significant achievements in developing techniques for imposing BCs in static...Enforcing initial and boundary conditions(I/BCs)poses challenges in physics-informed neural networks(PINNs).Several PINN studies have gained significant achievements in developing techniques for imposing BCs in static problems;however,the simultaneous enforcement of I/BCs in dynamic problems remains challenging.To overcome this limitation,a novel approach called decoupled physics-informed neural network(d PINN)is proposed in this work.The d PINN operates based on the core idea of converting a partial differential equation(PDE)to a system of ordinary differential equations(ODEs)via the space-time decoupled formulation.To this end,the latent solution is expressed in the form of a linear combination of approximation functions and coefficients,where approximation functions are admissible and coefficients are unknowns of time that must be solved.Subsequently,the system of ODEs is obtained by implementing the weighted-residual form of the original PDE over the spatial domain.A multi-network structure is used to parameterize the set of coefficient functions,and the loss function of d PINN is established based on minimizing the residuals of the gained ODEs.In this scheme,the decoupled formulation leads to the independent handling of I/BCs.Accordingly,the BCs are automatically satisfied based on suitable selections of admissible functions.Meanwhile,the original ICs are replaced by the Galerkin form of the ICs concerning unknown coefficients,and the neural network(NN)outputs are modified to satisfy the gained ICs.Several benchmark problems involving different types of PDEs and I/BCs are used to demonstrate the superior performance of d PINN compared with regular PINN in terms of solution accuracy and computational cost.展开更多
To achieve high power rating and low current harmonics of motor drive,this paper develops a dual three-phase open-winding permanent magnet synchronous motor(DTP-OW-PMSM)drive with the DC-link voltage ratio of 2:1:1.Ba...To achieve high power rating and low current harmonics of motor drive,this paper develops a dual three-phase open-winding permanent magnet synchronous motor(DTP-OW-PMSM)drive with the DC-link voltage ratio of 2:1:1.Based on this topology,this paper proposes a DTP four-level space vector pulse width modulation(DTP-FL SVPWM)strategy.First,two identical three-phase four-level space vector diagrams are constructed and divided.Then,three adjacent vectors nearest to the reference vector in each diagram are selected for the vector synthesis to guarantee high modulation precision and low switching frequency.Furthermore,to avoid the modulation error caused by the voltage deviation,the proposed DTP-FL SVPWM strategy is further optimized through unified duty ratio compensation(UDRC).The effectiveness of the proposed strategy is verified through experiments.展开更多
In weak field limits,we compute the deflection angle of a gravitational decoupling extended black hole(BH)solution.We obtained the Gaussian optical curvature by examining the null geodesic equations with the help of G...In weak field limits,we compute the deflection angle of a gravitational decoupling extended black hole(BH)solution.We obtained the Gaussian optical curvature by examining the null geodesic equations with the help of Gauss-Bonnet theorem(GBT).We also looked into the deflection angle of light by a black hole in weak field limits with the use of the Gibbons-Werner method.We verify the graphical behavior of the black hole after determining the deflection angle of light.Additionally,in the presence of the plasma medium,we also determine the deflection angle of the light and examine its graphical behavior.Furthermore,we compute the Einstein ring via gravitational decoupling extended black hole solution.We also compute the quasi-periodic oscillations and discuss their graphical behavior.展开更多
The growing demand for efficient high-power switching power supplies has spurred interest in advanced topologies.The three-phase VIENNA converter stands out for its high power factor,simplified structure,and robust pe...The growing demand for efficient high-power switching power supplies has spurred interest in advanced topologies.The three-phase VIENNA converter stands out for its high power factor,simplified structure,and robust performance.Current research focuses on its operational principles,control strategies,and behavior under various load conditions.Key considerations include component selection,thermal management,and EMI/EMC optimization.This topology finds applications across renewable energy systems,industrial equipment,telecommunications,and electric vehicle charging infrastructures.Comparative analyses with alternative topologies and cost-benefit evaluations are also addressed.Future developments are expected to emphasize the integration of wide-bandgap devices and advancements in digital control techniques to further enhance efficiency and system performance.展开更多
Combining water electrolysis and rechargeable battery technologies into a single system holds great promise for the co-production of hydrogen (H_(2)) and electricity.However,the design and development of such systems ...Combining water electrolysis and rechargeable battery technologies into a single system holds great promise for the co-production of hydrogen (H_(2)) and electricity.However,the design and development of such systems is still in its infancy.Herein,an integrated hydrogen-oxygen (O_(2))-electricity co-production system featuring a bipolar membrane-assisted decoupled electrolyzer and a Na-Zn ion battery was established with sodium nickelhexacyanoferrate (NaNiHCF) and Zn^(2+)/Zn as dual redox electrodes.The decoupled electrolyzer enables to produce H_(2)and O_(2)in different time and space with almost 100%Faradaic efficiency at 100 mA cm^(-2).Then,the charged NaNiHCF and Zn electrodes after the electrolysis processes formed a Na-Zn ion battery,which can generate electricity with an average cell voltage of 1.75 V at 10 m A cm^(-2).By connecting Si photovoltaics with the modular electrochemical device,a well-matched solar driven system was built to convert the intermittent solar energy into hydrogen and electric energy with a solar to hydrogen-electricity efficiency of 16.7%,demonstrating the flexible storage and conversion of renewables.展开更多
Research indicates that microbe activity within the human body significantly influences health by being closely linked to various diseases.Accurately predicting microbe-disease interactions(MDIs)offers critical insigh...Research indicates that microbe activity within the human body significantly influences health by being closely linked to various diseases.Accurately predicting microbe-disease interactions(MDIs)offers critical insights for disease intervention and pharmaceutical research.Current advanced AI-based technologies automatically generate robust representations of microbes and diseases,enabling effective MDI predictions.However,these models continue to face significant challenges.A major issue is their reliance on complex feature extractors and classifiers,which substantially diminishes the models’generalizability.To address this,we introduce a novel graph autoencoder framework that utilizes decoupled representation learning and multi-scale information fusion strategies to efficiently infer potential MDIs.Initially,we randomly mask portions of the input microbe-disease graph based on Bernoulli distribution to boost self-supervised training and minimize noise-related performance degradation.Secondly,we employ decoupled representation learning technology,compelling the graph neural network(GNN)to independently learn the weights for each feature subspace,thus enhancing its expressive power.Finally,we implement multi-scale information fusion technology to amalgamate the multi-layer outputs of GNN,reducing information loss due to occlusion.Extensive experiments on public datasets demonstrate that our model significantly surpasses existing top MDI prediction models.This indicates that our model can accurately predict unknown MDIs and is likely to aid in disease discovery and precision pharmaceutical research.Code and data are accessible at:https://github.com/shmildsj/MDI-IFDRL.展开更多
Smart grid substation operations often take place in hazardous environments and pose significant threats to the safety of power personnel.Relying solely on manual supervision can lead to inadequate oversight.In respon...Smart grid substation operations often take place in hazardous environments and pose significant threats to the safety of power personnel.Relying solely on manual supervision can lead to inadequate oversight.In response to the demand for technology to identify improper operations in substation work scenarios,this paper proposes a substation safety action recognition technology to avoid the misoperation and enhance the safety management.In general,this paper utilizes a dual-branch transformer network to extract spatial and temporal information from the video dataset of operational behaviors in complex substation environments.Firstly,in order to capture the spatial-temporal correlation of people's behaviors in smart grid substation,we devise a sparse attention module and a segmented linear attention module that are embedded into spatial branch transformer and temporal branch transformer respectively.To avoid the redundancy of spatial and temporal information,we fuse the temporal and spatial features using a tensor decomposition fusion module by a decoupled manner.Experimental results indicate that our proposed method accurately detects improper operational behaviors in substation work scenarios,outperforming other existing methods in terms of detection and recognition accuracy.展开更多
The dual three-phase PMSM(DTP-PMSM)drives have received wide attention at high-power high-efficiency applications due to their merits of high output current ability and copper-loss-free field excitation.Meanwhile,the ...The dual three-phase PMSM(DTP-PMSM)drives have received wide attention at high-power high-efficiency applications due to their merits of high output current ability and copper-loss-free field excitation.Meanwhile,the DTPPMSM drive provides higher fault-tolerant capability for highreliability applications,e.g.,pumps and actuators in aircraft.For high-power drives with limited switching frequencies and highspeed drives with large fundamental frequencies,the ratio of switching frequency to fundamental frequency,i.e.,the carrier ratio,is usually below 15,which would significantly degrade the control performance.The purpose of this paper is to review the recent work on the modulation and control schemes for improving the operation performance of DTP-PMSM drives with low carrier ratios.Specifically,three categories of methods,i.e.,the space vector modulation based control,the model predictive control(MPC),and the optimized pulse pattern(OPP)based control are reviewed with principles and performance.In addition,brief discussions regarding the comparison and future trends are presented for low-carrier-ratio(LCR)modulation and control schemes of DTP-PMSM drives.展开更多
This work addresses the cut order planning(COP)problem for multi-color garment production,which is the first step in the clothing industry.First,a multi-objective optimization model of multicolor COP(MCOP)is establish...This work addresses the cut order planning(COP)problem for multi-color garment production,which is the first step in the clothing industry.First,a multi-objective optimization model of multicolor COP(MCOP)is established with production error and production cost as optimization objectives,combined with constraints such as the number of equipment and the number of layers.Second,a decoupled multi-objective optimization algorithm(DMOA)is proposed based on the linear programming decoupling strategy and non-dominated sorting in genetic algorithmsⅡ(NSGAII).The size-combination matrix and the fabric-layer matrix are decoupled to improve the accuracy of the algorithm.Meanwhile,an improved NSGAII algorithm is designed to obtain the optimal Pareto solution to the MCOP problem,thereby constructing a practical intelligent production optimization algorithm.Finally,the effectiveness and superiority of the proposed DMOA are verified through practical cases and comparative experiments,which can effectively optimize the production process for garment enterprises.展开更多
This study focuses on a new and high-efficiency approach in a unified sense of accurately simulating strength-degrading effects for geomaterials,including non-symmetric hardening-to-softening effects in tension and co...This study focuses on a new and high-efficiency approach in a unified sense of accurately simulating strength-degrading effects for geomaterials,including non-symmetric hardening-to-softening effects in tension and compression as well as non-symmetric tensile and compressive stiffness-degrading effects during unloading.It is intended to bypass both modeling and numerical complexities involved in existing approaches.To this goal,new elastoplastic equations are established with new numerical techniques.With a decoupling technique of treating tension-compression asymmetry,the foregoing complex effects are automatically incorporated as inherent response features of the new elastoplastic equations,thus bypassing usual modeling complexities.A new numerical technique of renormalizing piecewise spline functions is introduced to resolve the central yet tough issue of obtaining accurate and unified expressions for the tensile and compressive strength functions,thus bypassing usual numerical complexities and uncertainties in treating numerous unknown parameters and multiple ad hoc criteria.As such,the new approach is not only of wide applicability for various geomaterials but also of high computational efficiency with no more than three adjustable parameters.Toward validating the efficacy of the new approach,numerical examples for granite,salt rock,and sandstone-concrete combined body as well as plain concrete,high-performance concrete,and ultrahigh-performance concrete are presented by comparing model predictions with multiple data sets for strength-degrading effects in tension and compression.展开更多
Early fault detection for spiral bevel gears is crucial to ensure normal operation and prevent accidents.The harmonic components,excited by the time-varying mesh stiffness,always appear in measured vibration signal.Ho...Early fault detection for spiral bevel gears is crucial to ensure normal operation and prevent accidents.The harmonic components,excited by the time-varying mesh stiffness,always appear in measured vibration signal.How to extract the periodical impulses that indicate gear localized fault buried in the intensive noise and interfered by harmonics is a challenging task.In this paper,a novel Periodical Sparse-Assisted Decoupling(PSAD)method is proposed as an optimization problem to extract fault feature from noisy vibration signal.The PSAD method decouples the impulsive fault feature and harmonic components based on the sparse representation method.The sparsity within and across groups property and the periodicity of the fault feature are incorporated into the regularizer as the prior information.The nonconvex penalty is employed to highlight the sparsity of fault features.Meanwhile,the weight factor based on2norm of each group is constructed to strengthen the amplitude of fault feature.An iterative algorithm with Majorization-Minimization(MM)is derived to solve the optimization problem.Simulation study and experimental analysis confirm the performance of the proposed PSAD method in extracting and enhancing defect impulses from noisy signal.The suggested method surpasses other comparative methods in extracting and enhancing fault features.展开更多
Unlike previous theories with velocity and/or elastic modulus averaging, we use a three-phase porous rock physics model developed by Santos for analyzing the seismic response of two immiscible fluids in saturated poro...Unlike previous theories with velocity and/or elastic modulus averaging, we use a three-phase porous rock physics model developed by Santos for analyzing the seismic response of two immiscible fluids in saturated porous media. Considering reservoir reference pressure and coupling drag of two fluids in pores, the effects of frequency, porosity, and gas saturation on the phase velocities of the P-and S-waves are discussed in detail under field conditions. The effects of porosity and gas saturation on Vp/Vs are also provided. The data for our numerical experiments are from a sample of deep volcanic rock from Daqing. The numerical results show that the frequency dispersion effect can be ignored for deep volcanic rocks with low porosity and low permeability. It is concluded that for deep volcanic rocks the effect of gas content in pores on Vp/Vs is negligible but the effect of porosity is significant when there is a certain amount of water contained in the pores. The accurate estimate of lithology and porosity in this case is relatively more important.展开更多
For three phase four-wire active power filters （APFs）, several typical power theories and corresponding current reference generation strategies are induced, p-q, d-q, unify power factor （UPF） and instantaneous act...For three phase four-wire active power filters （APFs）, several typical power theories and corresponding current reference generation strategies are induced, p-q, d-q, unify power factor （UPF） and instantaneous active current （IAC） methods are analyzed and compared with each other. The interpretation of active and reactive currents in non-sinusoidal and unbalanced three-phase four-wire systems is given based on the generalized instantaneous reactive power theory. The performance and the characteristic are evaluated, and the application conditions of current reference generation strategies are concluded. Simulation results under different source voltages and loads verify the evaluation result.展开更多
The three-phase bridge inverter is used as the converter topology in the power controller for a 9 kW doubly salient permanent magnet （DSPM） motor. Compared with common three-phase bridge inverters, the proposed inve...The three-phase bridge inverter is used as the converter topology in the power controller for a 9 kW doubly salient permanent magnet （DSPM） motor. Compared with common three-phase bridge inverters, the proposed inverter works under more complicated conditions with different principles for special winding back EMFs, position signals of hall sensors, and the given mode of switches. The ideal steady driving principles of the inverter for the motor are given. The working state with asymmetric winding back EMFs, inaccurate position signals of hall sensors, and the changing input voltage is analyzed. Finally, experimental results vertify that the given anal ysis is correct.展开更多
基金supported by the National Natural Science Foundation of China(Nos.52422408 and 52171031)the Liaoning Xingliao Talents-Top-notch Young Talents Project(No.XLYC2203064)+1 种基金the Excellent Youth Fund of Liaoning Natural Science Foundation(No.2023JH3/10200001)the Fundamental Research Funds for the Central Universities(No.N2425004).
文摘The transient phenomena of re-oxidation and slag entrapment occurring in the tundish during the ladle change-over process have been proven detrimental to clean steel production.Therefore,an unsteady three-phase turbulence model,coupling velocity,temperature,and phase field was established to study the effect of the ladle shroud immersion depth on the slag eye formation,slag entrainment,slag dragging,air dragging,and flow characteristics during the ladle change-over process of a two-strand tundish.The results showed that reducing the immersion depth decreases the high-velocity region area under the slag layer in the quasi-steady process.During the emptying stage,as the molten bath level gradually decreases,the outlet temperature exhibits a trend of initially decreasing and subsequently increasing across all three shroud immersion depths.However,under a 210 mm shroud immersion depth,molten slag and air are dragged into the shroud,forming slag droplets and causing significant fluctuations,with a maximum scalar velocity of 0.0764 m/s at the monitoring point.In the filling stage,air and molten slag are dragged into the molten bath,forming bubbles and slag droplets at an immersion depth of 210 mm.Bubbles are observed within the molten slag layer,which can readily cause an emulsification phenomenon,making it easier to be dragged as slag droplets.Additionally,the slag eye area measured under 210 mm immersion depth at 45 s is 0.303 m^(2),while the maximum scalar velocity of 2.4259 m/s is detected at 12 s.At an immersion depth of 360 mm,the average area of the slag eye is minimized to 0.06268 m2,with corresponding variances of 0.006753,representing the optimal immersion depth.
基金support from the National Key Research and Development Program of China(No.2022YFE0137400)the National Natural Science Foundation of China(Grant No.62274040).
文摘The past decade has witnessed the rapid increasement in power conversion efficiency of perovskite solar cells(PSCs).However,serious ion migration hampers their operational stability.Although dopants composed of varied cations and anions are introduced into perovskite to suppress ion migration,the impact of cations or anions is not individually explored,which hinders the evaluation of different cations and further application of doping strategy.Here we report that a special group of sulfonic anions(like CF_(3)SO_(3)^(-))successfully introduce alkaline earth ions(like Ca^(2+))into perovskite lattice compared to its halide counterparts.Furthermore,with effective crystallization regulation and defect passivation of sulfonic anions,perovskite with Ca(CF_(3)SO_(3))_(2)shows reduced PbI2 residue and metallic Pb0 defects;thereby,corresponding PSCs show an enhanced PCE of 24.95%.Finally by comparing the properties of perovskite with Ca(CF_(3)SO_(3))_(2)and FACF_(3)SO_(3),we found that doped Ca^(2+)significantly suppressed halide migration with an activation energy of 1.246 eV which accounts for the improved operational stability of Ca(CF_(3)SO_(3))_(2-)doped PSCs,while no obvious impact of Ca^(2+)on trap density is observed.Combining the benefits of cations and anions,this study presents an effective method to decouple the effects of cations and anions and fabricate efficient and stable PSCs.
基金Project(61174132) supported by the National Natural Science Foundation of ChinaProject(09JJ6098) supported by the Natural Science Foundation of Hunan Province, China
文摘Taking three-phase electrode adjusting system of submerged arc furnace as study object which has nonlinear, time-variant, multivariable and strong coupling features, a neural adaptive PSD(proportion, sum and differential) dispersive decoupling controller was developed by combining neural adaptive PSD algorithm with dispersive decoupling network. In this work, the production technology process and control difficulties of submerged arc furnace were simply introduced, the necessity of establishing a neural adaptive PSD dispersive decoupling controller was discussed, the design method and the implementation steps of the controller are expounded in detail, and the block diagram of the controlled system is presented. By comparison with experimental results of the conventional PID controller and the adaptive PSD controller, the decoupling ability, adaptive ability, self-learning ability and robustness of the neural adaptive PSD dispersive decoupling controller have been testified effectively. The controller is applicable to the three-phase electrode adjusting system of submerged arc furnace, and it will play an important role for achieving the power balance of three-phrase electrodes, saving energy and reducing consumption in the process of smelting.
文摘Multiple functional metasurfaces with high information capacity have attracted considerable attention from researchers.This study proposes a 2-bit tunable spin-decoupled coded metasurface designed for the terahertz band,which utilizes the tunable properties of Dirac semimetals(DSM)to create a novel multilayer structure.By incorporating both geometric and propagating phases into the metasurface design,we can effectively control the electromagnetic wave.When the Fermi level(EF)of the DSM is set at 6 meV,the electromagnetic wave is manipulated by the gold patch embedded in the DSM film,operating at a frequency of 1.3 THz.When the EF of the DSM is set at 80 meV,the electromagnetic wave is manipulated by the DSM patch,operating at a frequency of 1.4 THz.Both modes enable independent control of beam splitting under left-rotating circularly polarized(LCP)and rightrotating circularly polarized(RCP)wave excitation,resulting in the generation of vortex beams with distinct orbital angular momentum(OAM)modes.The findings of this study hold significant potential for enhancing information capacity and polarization multiplexing techniques in wireless communications.
基金funding from the Alchemist Project Program(Grant No.RS-2024-00422269)Technology Innovation Program(Grant No.RS-2024-00443121)+1 种基金supported by the Ministry of Trade,Industry&Energy(MOTIE,Korea)support by a National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIP,Ministry of Science,ICT&Future Planning,Grant Nos.NRF-2022R1A4A3032913 and RS-2024-00411904).
文摘Real-time sensory signal monitoring systems are crucial for continuous health tracking and enhancing human-interface technologies in virtual reality/augmented reality applications.Recent advancements in micro/nanofabrication technologies have enabled wearable and implantable sensors to achieve sufficient sensitivity for measuring subtle sensory signals,while integration with wireless communication technologies allows for real-time monitoring and closed-loop user feedback.However,highly sensitive sensing materials face challenges,as their detection results can easily be altered by external factors such as bending,temperature,and humidity.This review discusses methods for decoupling various stimuli and their applications in human interfaces.We cover the latest advancements in decoupled systems,including the design of sensing materials using micro/nanostructured materials,3-dimensional(3D)sensory system architectures,and Artificial intelligence(AI)-based signal decoupling processing techniques.Additionally,we highlight key applications in robotics,wearable,and implantable health monitoring made possible by these decoupled systems.Finally,we suggest future research directions to address the remaining challenges of developing decoupled artificial sensory systems that are resilient to external stimuli.
基金Project supported by the Basic Science Research Program through the National Research Foundation(NRF)of Korea funded by the Ministry of Science and ICT(No.RS-2024-00337001)。
文摘Enforcing initial and boundary conditions(I/BCs)poses challenges in physics-informed neural networks(PINNs).Several PINN studies have gained significant achievements in developing techniques for imposing BCs in static problems;however,the simultaneous enforcement of I/BCs in dynamic problems remains challenging.To overcome this limitation,a novel approach called decoupled physics-informed neural network(d PINN)is proposed in this work.The d PINN operates based on the core idea of converting a partial differential equation(PDE)to a system of ordinary differential equations(ODEs)via the space-time decoupled formulation.To this end,the latent solution is expressed in the form of a linear combination of approximation functions and coefficients,where approximation functions are admissible and coefficients are unknowns of time that must be solved.Subsequently,the system of ODEs is obtained by implementing the weighted-residual form of the original PDE over the spatial domain.A multi-network structure is used to parameterize the set of coefficient functions,and the loss function of d PINN is established based on minimizing the residuals of the gained ODEs.In this scheme,the decoupled formulation leads to the independent handling of I/BCs.Accordingly,the BCs are automatically satisfied based on suitable selections of admissible functions.Meanwhile,the original ICs are replaced by the Galerkin form of the ICs concerning unknown coefficients,and the neural network(NN)outputs are modified to satisfy the gained ICs.Several benchmark problems involving different types of PDEs and I/BCs are used to demonstrate the superior performance of d PINN compared with regular PINN in terms of solution accuracy and computational cost.
基金supported in part by the National Natural Science Foundation of China under Grant 62303333in part by the Project of Hetao Shenzhen-Hong Kong Science and Technology Innovation Cooperation Zone under Grant HZQB-KCZYB-2020083.
文摘To achieve high power rating and low current harmonics of motor drive,this paper develops a dual three-phase open-winding permanent magnet synchronous motor(DTP-OW-PMSM)drive with the DC-link voltage ratio of 2:1:1.Based on this topology,this paper proposes a DTP four-level space vector pulse width modulation(DTP-FL SVPWM)strategy.First,two identical three-phase four-level space vector diagrams are constructed and divided.Then,three adjacent vectors nearest to the reference vector in each diagram are selected for the vector synthesis to guarantee high modulation precision and low switching frequency.Furthermore,to avoid the modulation error caused by the voltage deviation,the proposed DTP-FL SVPWM strategy is further optimized through unified duty ratio compensation(UDRC).The effectiveness of the proposed strategy is verified through experiments.
基金funded by the National Natural Science Foundation of China under Grant No.11975145。
文摘In weak field limits,we compute the deflection angle of a gravitational decoupling extended black hole(BH)solution.We obtained the Gaussian optical curvature by examining the null geodesic equations with the help of Gauss-Bonnet theorem(GBT).We also looked into the deflection angle of light by a black hole in weak field limits with the use of the Gibbons-Werner method.We verify the graphical behavior of the black hole after determining the deflection angle of light.Additionally,in the presence of the plasma medium,we also determine the deflection angle of the light and examine its graphical behavior.Furthermore,we compute the Einstein ring via gravitational decoupling extended black hole solution.We also compute the quasi-periodic oscillations and discuss their graphical behavior.
文摘The growing demand for efficient high-power switching power supplies has spurred interest in advanced topologies.The three-phase VIENNA converter stands out for its high power factor,simplified structure,and robust performance.Current research focuses on its operational principles,control strategies,and behavior under various load conditions.Key considerations include component selection,thermal management,and EMI/EMC optimization.This topology finds applications across renewable energy systems,industrial equipment,telecommunications,and electric vehicle charging infrastructures.Comparative analyses with alternative topologies and cost-benefit evaluations are also addressed.Future developments are expected to emphasize the integration of wide-bandgap devices and advancements in digital control techniques to further enhance efficiency and system performance.
基金National Natural Science Foundation of China (Nos. 52488201, 52076177, and 52476222)China National Key Research and Development Plan Project (No. 2021YFF0500503)+1 种基金Key Research and Development Program of Shaanxi (No. 2024GH-YBXM-02)China Fundamental Research Funds for the Central Universities。
文摘Combining water electrolysis and rechargeable battery technologies into a single system holds great promise for the co-production of hydrogen (H_(2)) and electricity.However,the design and development of such systems is still in its infancy.Herein,an integrated hydrogen-oxygen (O_(2))-electricity co-production system featuring a bipolar membrane-assisted decoupled electrolyzer and a Na-Zn ion battery was established with sodium nickelhexacyanoferrate (NaNiHCF) and Zn^(2+)/Zn as dual redox electrodes.The decoupled electrolyzer enables to produce H_(2)and O_(2)in different time and space with almost 100%Faradaic efficiency at 100 mA cm^(-2).Then,the charged NaNiHCF and Zn electrodes after the electrolysis processes formed a Na-Zn ion battery,which can generate electricity with an average cell voltage of 1.75 V at 10 m A cm^(-2).By connecting Si photovoltaics with the modular electrochemical device,a well-matched solar driven system was built to convert the intermittent solar energy into hydrogen and electric energy with a solar to hydrogen-electricity efficiency of 16.7%,demonstrating the flexible storage and conversion of renewables.
基金supported by the Natural Science Foundation of Wenzhou University of Technology,China(Grant No.:ky202211).
文摘Research indicates that microbe activity within the human body significantly influences health by being closely linked to various diseases.Accurately predicting microbe-disease interactions(MDIs)offers critical insights for disease intervention and pharmaceutical research.Current advanced AI-based technologies automatically generate robust representations of microbes and diseases,enabling effective MDI predictions.However,these models continue to face significant challenges.A major issue is their reliance on complex feature extractors and classifiers,which substantially diminishes the models’generalizability.To address this,we introduce a novel graph autoencoder framework that utilizes decoupled representation learning and multi-scale information fusion strategies to efficiently infer potential MDIs.Initially,we randomly mask portions of the input microbe-disease graph based on Bernoulli distribution to boost self-supervised training and minimize noise-related performance degradation.Secondly,we employ decoupled representation learning technology,compelling the graph neural network(GNN)to independently learn the weights for each feature subspace,thus enhancing its expressive power.Finally,we implement multi-scale information fusion technology to amalgamate the multi-layer outputs of GNN,reducing information loss due to occlusion.Extensive experiments on public datasets demonstrate that our model significantly surpasses existing top MDI prediction models.This indicates that our model can accurately predict unknown MDIs and is likely to aid in disease discovery and precision pharmaceutical research.Code and data are accessible at:https://github.com/shmildsj/MDI-IFDRL.
文摘Smart grid substation operations often take place in hazardous environments and pose significant threats to the safety of power personnel.Relying solely on manual supervision can lead to inadequate oversight.In response to the demand for technology to identify improper operations in substation work scenarios,this paper proposes a substation safety action recognition technology to avoid the misoperation and enhance the safety management.In general,this paper utilizes a dual-branch transformer network to extract spatial and temporal information from the video dataset of operational behaviors in complex substation environments.Firstly,in order to capture the spatial-temporal correlation of people's behaviors in smart grid substation,we devise a sparse attention module and a segmented linear attention module that are embedded into spatial branch transformer and temporal branch transformer respectively.To avoid the redundancy of spatial and temporal information,we fuse the temporal and spatial features using a tensor decomposition fusion module by a decoupled manner.Experimental results indicate that our proposed method accurately detects improper operational behaviors in substation work scenarios,outperforming other existing methods in terms of detection and recognition accuracy.
基金supported by the National Key Research and Development Program of China under the grant of 2022YFB3403100。
文摘The dual three-phase PMSM(DTP-PMSM)drives have received wide attention at high-power high-efficiency applications due to their merits of high output current ability and copper-loss-free field excitation.Meanwhile,the DTPPMSM drive provides higher fault-tolerant capability for highreliability applications,e.g.,pumps and actuators in aircraft.For high-power drives with limited switching frequencies and highspeed drives with large fundamental frequencies,the ratio of switching frequency to fundamental frequency,i.e.,the carrier ratio,is usually below 15,which would significantly degrade the control performance.The purpose of this paper is to review the recent work on the modulation and control schemes for improving the operation performance of DTP-PMSM drives with low carrier ratios.Specifically,three categories of methods,i.e.,the space vector modulation based control,the model predictive control(MPC),and the optimized pulse pattern(OPP)based control are reviewed with principles and performance.In addition,brief discussions regarding the comparison and future trends are presented for low-carrier-ratio(LCR)modulation and control schemes of DTP-PMSM drives.
基金Supported by the Natural Science Foundation of Zhejiang Province(No.LQ22F030015).
文摘This work addresses the cut order planning(COP)problem for multi-color garment production,which is the first step in the clothing industry.First,a multi-objective optimization model of multicolor COP(MCOP)is established with production error and production cost as optimization objectives,combined with constraints such as the number of equipment and the number of layers.Second,a decoupled multi-objective optimization algorithm(DMOA)is proposed based on the linear programming decoupling strategy and non-dominated sorting in genetic algorithmsⅡ(NSGAII).The size-combination matrix and the fabric-layer matrix are decoupled to improve the accuracy of the algorithm.Meanwhile,an improved NSGAII algorithm is designed to obtain the optimal Pareto solution to the MCOP problem,thereby constructing a practical intelligent production optimization algorithm.Finally,the effectiveness and superiority of the proposed DMOA are verified through practical cases and comparative experiments,which can effectively optimize the production process for garment enterprises.
基金Project supported by the National Natural Science Foundation of China(Nos.12172149,12172151,and 12202378)the MOE Key Laboratory of Fututer Intelligent Manufacturing Technologies for High-End Equipment of China(No.FIMFYUST-2025B07)+1 种基金the Guangzhou Municipal Bureau of Science and Technology of China(No.SL2023A04J01461)the Ministry of Science and Technology of China(No.G20221990122)。
文摘This study focuses on a new and high-efficiency approach in a unified sense of accurately simulating strength-degrading effects for geomaterials,including non-symmetric hardening-to-softening effects in tension and compression as well as non-symmetric tensile and compressive stiffness-degrading effects during unloading.It is intended to bypass both modeling and numerical complexities involved in existing approaches.To this goal,new elastoplastic equations are established with new numerical techniques.With a decoupling technique of treating tension-compression asymmetry,the foregoing complex effects are automatically incorporated as inherent response features of the new elastoplastic equations,thus bypassing usual modeling complexities.A new numerical technique of renormalizing piecewise spline functions is introduced to resolve the central yet tough issue of obtaining accurate and unified expressions for the tensile and compressive strength functions,thus bypassing usual numerical complexities and uncertainties in treating numerous unknown parameters and multiple ad hoc criteria.As such,the new approach is not only of wide applicability for various geomaterials but also of high computational efficiency with no more than three adjustable parameters.Toward validating the efficacy of the new approach,numerical examples for granite,salt rock,and sandstone-concrete combined body as well as plain concrete,high-performance concrete,and ultrahigh-performance concrete are presented by comparing model predictions with multiple data sets for strength-degrading effects in tension and compression.
基金supported by the National Science Foundationof China(Nos.52305127 and 52475130)。
文摘Early fault detection for spiral bevel gears is crucial to ensure normal operation and prevent accidents.The harmonic components,excited by the time-varying mesh stiffness,always appear in measured vibration signal.How to extract the periodical impulses that indicate gear localized fault buried in the intensive noise and interfered by harmonics is a challenging task.In this paper,a novel Periodical Sparse-Assisted Decoupling(PSAD)method is proposed as an optimization problem to extract fault feature from noisy vibration signal.The PSAD method decouples the impulsive fault feature and harmonic components based on the sparse representation method.The sparsity within and across groups property and the periodicity of the fault feature are incorporated into the regularizer as the prior information.The nonconvex penalty is employed to highlight the sparsity of fault features.Meanwhile,the weight factor based on2norm of each group is constructed to strengthen the amplitude of fault feature.An iterative algorithm with Majorization-Minimization(MM)is derived to solve the optimization problem.Simulation study and experimental analysis confirm the performance of the proposed PSAD method in extracting and enhancing defect impulses from noisy signal.The suggested method surpasses other comparative methods in extracting and enhancing fault features.
文摘Unlike previous theories with velocity and/or elastic modulus averaging, we use a three-phase porous rock physics model developed by Santos for analyzing the seismic response of two immiscible fluids in saturated porous media. Considering reservoir reference pressure and coupling drag of two fluids in pores, the effects of frequency, porosity, and gas saturation on the phase velocities of the P-and S-waves are discussed in detail under field conditions. The effects of porosity and gas saturation on Vp/Vs are also provided. The data for our numerical experiments are from a sample of deep volcanic rock from Daqing. The numerical results show that the frequency dispersion effect can be ignored for deep volcanic rocks with low porosity and low permeability. It is concluded that for deep volcanic rocks the effect of gas content in pores on Vp/Vs is negligible but the effect of porosity is significant when there is a certain amount of water contained in the pores. The accurate estimate of lithology and porosity in this case is relatively more important.
文摘For three phase four-wire active power filters （APFs）, several typical power theories and corresponding current reference generation strategies are induced, p-q, d-q, unify power factor （UPF） and instantaneous active current （IAC） methods are analyzed and compared with each other. The interpretation of active and reactive currents in non-sinusoidal and unbalanced three-phase four-wire systems is given based on the generalized instantaneous reactive power theory. The performance and the characteristic are evaluated, and the application conditions of current reference generation strategies are concluded. Simulation results under different source voltages and loads verify the evaluation result.
文摘The three-phase bridge inverter is used as the converter topology in the power controller for a 9 kW doubly salient permanent magnet （DSPM） motor. Compared with common three-phase bridge inverters, the proposed inverter works under more complicated conditions with different principles for special winding back EMFs, position signals of hall sensors, and the given mode of switches. The ideal steady driving principles of the inverter for the motor are given. The working state with asymmetric winding back EMFs, inaccurate position signals of hall sensors, and the changing input voltage is analyzed. Finally, experimental results vertify that the given anal ysis is correct.
