A clock bias data processing method based on interval correlation coefficient wavelet threshold denoising is suggested for minor mistakes in clock bias data in order to increase the efficacy of satellite clock bias pr...A clock bias data processing method based on interval correlation coefficient wavelet threshold denoising is suggested for minor mistakes in clock bias data in order to increase the efficacy of satellite clock bias prediction.Wavelet analysis was first used to break down the satellite clock frequency data into several levels,producing high and low frequency coefficients for each layer.The correlation coefficients of the high and low frequency coefficients in each of the three sub-intervals created by splitting these coefficients were then determined.The major noise region—the sub-interval with the lowest correlation coefficient—was chosen for thresholding treatment and noise threshold computation.The clock frequency data was then processed using wavelet reconstruction and reconverted to clock data.Lastly,three different kinds of satellite clock data—RTS,whu-o,and IGS-F—were used to confirm the produced data.Our method enhanced the stability of the Quadratic Polynomial(QP)model’s predictions for the C16 satellite by about 40%,according to the results.The accuracy and stability of the Auto Regression Integrated Moving Average(ARIMA)model improved up to 41.8%and 14.2%,respectively,whilst the Wavelet Neural Network(WNN)model improved by roughly 27.8%and 63.6%,respectively.Although our method has little effect on forecasting IGS-F series satellites,the experimental findings show that it can improve the accuracy and stability of QP,ARIMA,and WNN model forecasts for RTS and whu-o satellite clock bias.展开更多
The fatigue resistance of casting polyurethane(CPU)is crucial in various sectors,such as construction,healthcare,and the automotive industry.Despite its importance,no studies have reported on the fatigue threshold of ...The fatigue resistance of casting polyurethane(CPU)is crucial in various sectors,such as construction,healthcare,and the automotive industry.Despite its importance,no studies have reported on the fatigue threshold of CPU.This study employed an advanced Intrinsic Strength Analyzer(ISA)to evaluate the fatigue threshold of CPUs,systematically exploring the effects of three types of isocyanates(PPDI,NDI,TDI)that contribute to hard segment structures based on the cutting method.Employing multiple advanced characterization techniques(XRD,TEM,DSC,AFM),the results indicate that PPDI-based polyurethane exhibits the highest fatigue threshold(182.89 J/m^(2))due to a highest phase separation and a densely packed spherulitic structure,although the hydrogen bonding degree is the lowest(48.3%).Conversely,NDI-based polyurethane,despite having the high hydrogen bonding degree(53.6%),exhibits moderate fatigue performance(122.52 J/m^(2)),likely due to a more scattered microstructure.TDI-based polyurethane,with the highest hydrogen bonding degree(59.1%)but absence of spherulitic structure,shows the lowest fatigue threshold(46.43 J/m^(2)).Compared to common rubbers(NR,NBR,EPDM,BR),the superior fatigue performance of CPU is attributed to its well-organized microstructure,polyurethane possesses a higher fatigue threshold due to its high phase separation degree and orderly and dense spherulitic structure which enhances energy dissipation and reduces crack propagation.展开更多
In the multilevel thresholding segmentation of the image, the classification number is always given by the supervisor. To solve this problem, a fast multilevel thresholding algorithm considering both the threshold val...In the multilevel thresholding segmentation of the image, the classification number is always given by the supervisor. To solve this problem, a fast multilevel thresholding algorithm considering both the threshold value and the classification number is proposed based on the maximum entropy, and the self-adaptive criterion of the classification number is given. The algorithm can obtain thresholds and automatically decide the classification number. Experimental results show that the algorithm is effective.展开更多
Cost-effectiveness analysis（CEA） is increasingly important in health care decision making.Cost-effectiveness threshold is a critical parameter in the cost-effectiveness analysis.This review introduces the concept of...Cost-effectiveness analysis（CEA） is increasingly important in health care decision making.Cost-effectiveness threshold is a critical parameter in the cost-effectiveness analysis.This review introduces the concept of cost-effectiveness threshold, summarizes its determining methods,and classifies the existing methods into two kinds according to budget constraints,then analyzes the merit and demerit of every methods.When there is a flexible budget,the methods for determining the cost-effectiveness threshold include inferring the threshold from previous decisions,comparison with other health care technology or transfer from elsewhere in the public sector,social willingness-to-pay approach,GDP per capita criteria,and rule of thumb.When there is a fixed budget,the methods for determining the cost-effectiveness threshold include shadow price approach,opportunity cost approach,and ICER threshold-searcher model.Each approach to determining threshold has its strength and weakness.The aim of this article is to introduce the existing methods and discuss the features of each method.The background information,such as the definition of threshold,is also described.The basic theory of cost-effectiveness threshold is elaborated,and we recommend the establishment of a cost-effectiveness threshold in the Chinese health care.展开更多
Debris flows are the one type of natural disaster that is most closely associated with hu- man activities. Debris flows are characterized as being widely distributed and frequently activated. Rainfall is an important ...Debris flows are the one type of natural disaster that is most closely associated with hu- man activities. Debris flows are characterized as being widely distributed and frequently activated. Rainfall is an important component of debris flows and is the most active factor when debris flows oc- cur. Rainfall also determines the temporal and spatial distribution characteristics of the hazards. A reasonable rainfall threshold target is essential to ensuring the accuracy of debris flow pre-warning. Such a threshold is important for the study of the mechanisms of debris flow formation, predicting the characteristics of future activities and the design of prevention and engineering control measures. Most mountainous areas have little data regarding rainfall and hazards, especially in debris flow forming re- gions. Therefore, both the traditional demonstration method and frequency calculated method cannot satisfy the debris flow pre-warning requirements. This study presents the characteristics of pre-warning regions, included the rainfall, hydrologic and topographic conditions. An analogous area with abundant data and the same conditions as the pre-warning region was selected, and the rainfall threshold was calculated by proxy. This method resolved the problem of debris flow pre-warning in ar- eas lacking data and provided a new approach for debris flow pre-warning in mountainous areas.展开更多
During the microstructural analysis of weakly cemented sandstone,the granule components and ductile structural parts of the sandstone are typically generalized.Considering the contact between granules in the microstru...During the microstructural analysis of weakly cemented sandstone,the granule components and ductile structural parts of the sandstone are typically generalized.Considering the contact between granules in the microstructure of weakly cemented sandstone,three basic units can be determined:regular tetrahedra,regular hexahedra,and regular octahedra.Renormalization group models with granule-and pore-centered weakly cemented sandstone were established,and,according to the renormalization group transformation rule,the critical stress threshold of damage was calculated.The results show that the renormalization model using regular octahedra as the basic units has the highest critical stress threshold.The threshold obtained by iterative calculations of the granule-centered model is smaller than that obtained by the pore-centered model.The granule-centered calculation provides the lower limit(18.12%),and the pore-centered model provides the upper limit(36.36%).Within this range,the weakly cemented sandstone is in a phase-like critical state.That is,the state of granule aggregation transforms from continuous to discrete.In the relative stress range of 18.12%-36.36%,the weakly cemented sandstone exhibits an increased proportion of high-frequency signals(by 83.3%)and a decreased proportion of low-frequency signals(by 23.6%).The renormalization calculation results for weakly cemented sandstone explain the high-low frequency conversion of acoustic emission signals during loading.The research reported in this paper has important significance for elucidating the damage mechanism of weakly cemented sandstone.展开更多
This paper analyzes the characteristics of the output gradient histogram and shortages of several traditional automatic threshold methods in order to segment the gradient image better.Then an improved double-threshold...This paper analyzes the characteristics of the output gradient histogram and shortages of several traditional automatic threshold methods in order to segment the gradient image better.Then an improved double-threshold method is proposed,which is combined with the method of maximum classes variance,estimating-area method and double-threshold method.This method can automatically select two different thresholds to segment gradient images.The computer simulation is performed on the traditional methods and this algorithm and proves that this method can get satisfying result.展开更多
The purpose of this study is to apply different thresholding in mammogram images, and then we will determine which technique is the best in thresholding (extraction) malignant and benign tumors from the rest breast ti...The purpose of this study is to apply different thresholding in mammogram images, and then we will determine which technique is the best in thresholding (extraction) malignant and benign tumors from the rest breast tissues. The used technique is Otsu method, because it is one of the most effective methods for most real world views with regard to uniformity and shape measures. Also, we present all the thresholding methods that used the concept of between class variance. We found from the experimental results that all the used thresholding techniques work well in detection normal breast tissues. But in abnormal tissues (breast tumors), we found that only neighborhood valley emphasis method gave best detection of malignant tumors. Also, the results demonstrate that variance and intensity contrast technique is the best in extraction the micro calcifications which represent the first signs of breast cancer.展开更多
As an important model for explaining the seismic rupture mode,the asperity model plays an important role in studying the stress accumulation of faults and the location of earthquake initiation.Taking Qilian-Haiyuan fa...As an important model for explaining the seismic rupture mode,the asperity model plays an important role in studying the stress accumulation of faults and the location of earthquake initiation.Taking Qilian-Haiyuan fault as an example,this paper combines geodetic method and b-value method to propose a multi-source observation data fusion detection method that accurately determines the asperity boundary named dual threshold search method.The method is based on the criterion that the b-value asperity boundary should be most consistent with the slip deficit rate asperity boundary.Then the optimal threshold combination of slip deficit rate and b-value is obtained through threshold search,which can be used to determine the boundary of the asperity.Based on this method,the study finds that there are four potential asperities on the Qilian-Haiyuan fault:two asperities(A1 and A2)are on the Tuolaishan segment and the other two asperities(B and C)are on Lenglongling segment and Jinqianghe segment,respectively.Among them,the lengths of asperities A1 and A2 on Tuolaishan segment are 17.0 km and 64.8 km,respectively.And the lower boundaries are 5.5 km and 15.5 km,respectively;The length of asperity B on Lenglongling segment is 70.7 km,and the lower boundary is 10.2 km.The length of asperity C on Jinqianghe segment is 42.3 km,and the lower boundary is 8.3 km.展开更多
To overcome the shortcoming that the traditional minimum error threshold method can obtain satisfactory image segmentation results only when the object and background of the image strictly obey a certain type of proba...To overcome the shortcoming that the traditional minimum error threshold method can obtain satisfactory image segmentation results only when the object and background of the image strictly obey a certain type of probability distribution,one proposes the regularized minimum error threshold method and treats the traditional minimum error threshold method as its special case.Then one constructs the discrete probability distribution by using the separation between segmentation threshold and the average gray-scale values of the object and background of the image so as to compute the information energy of the probability distribution.The impact of the regularized parameter selection on the optimal segmentation threshold of the regularized minimum error threshold method is investigated.To verify the effectiveness of the proposed regularized minimum error threshold method,one selects typical grey-scale images and performs segmentation tests.The segmentation results obtained by the regularized minimum error threshold method are compared with those obtained with the traditional minimum error threshold method.The segmentation results and their analysis show that the regularized minimum error threshold method is feasible and produces more satisfactory segmentation results than the minimum error threshold method.It does not exert much impact on object acquisition in case of the addition of a certain noise to an image.Therefore,the method can meet the requirements for extracting a real object in the noisy environment.展开更多
The research of land use and land cover (LUCC) is an important aspect in the global change research. The goal of this study is to find methods of extraction of LUCC’s change outlined and change type from remotely sen...The research of land use and land cover (LUCC) is an important aspect in the global change research. The goal of this study is to find methods of extraction of LUCC’s change outlined and change type from remotely sensed data. Take the country of Fengxian in Shanghai as an example, it was supposed two steps to finish extraction of LUCC information: the first step was to use different methods, which is used to outline change areas; the second step include methods of false composing of two-temporal and threshold value. Through combining two methods, a model rule is built and the LUCC product is obtained, four kinds of change type within the study area are given, and the results are obvious. Finally, the results support the application of the high resolution image and tasseled cap composition (greenness and wetness) in the specific regional too.展开更多
Channel avulsion is a natural phenomenon that occurs abruptly on alluvial river deltas,which can affect the channel stability.The causes for avulsion could be generally categorized as topography-and flood-driven facto...Channel avulsion is a natural phenomenon that occurs abruptly on alluvial river deltas,which can affect the channel stability.The causes for avulsion could be generally categorized as topography-and flood-driven factors.However,previous studies on avulsion thresholds usually focused on topography-driven factors due to the centurial or millennial avulsion timescales of the world’s most deltas,but neglected the impacts of flood-driven factors.In the current study,a novel demarcation equation including the two driven factors was proposed,with the decadal timescale of avulsion being considered in the Yellow River Estuary(YRE).In order to quantify the contributions of different factors in each category,an entropy-based methodology was used to calculate the contributing weights of these factors.The factor with the highest weight in each category was then used to construct the demarcation equation,based on avulsion datasets associated with the YRE.An avulsion threshold was deduced according to the demarcation equation.This avulsion threshold was then applied to conduct the risk assessment of avulsion in the YRE.The results show that:two dominant factors cover respectively geomorphic coefficient representing the topography-driven factor and fluvial erosion intensity representing the flood-driven factor,which were thus employed to define a two dimensional mathematical space in which the demarcation equation can be obtained;the avulsion threshold derived from the equation was also applied in the risk assessment of avulsion;and the avulsion threshold proposed in this study is more accurate,as compared with the existing thresholds.展开更多
Four key stress thresholds exist in the compression process of rocks,i.e.,crack closure stress(σ_(cc)),crack initiation stress(σ_(ci)),crack damage stress(σ_(cd))and compressive strength(σ_(c)).The quantitative id...Four key stress thresholds exist in the compression process of rocks,i.e.,crack closure stress(σ_(cc)),crack initiation stress(σ_(ci)),crack damage stress(σ_(cd))and compressive strength(σ_(c)).The quantitative identifications of the first three stress thresholds are of great significance for characterizing the microcrack growth and damage evolution of rocks under compression.In this paper,a new method based on damage constitutive model is proposed to quantitatively measure the stress thresholds of rocks.Firstly,two different damage constitutive models were constructed based on acoustic emission(AE)counts and Weibull distribution function considering the compaction stages of the rock and the bearing capacity of the damage element.Then,the accumulative AE counts method(ACLM),AE count rate method(CRM)and constitutive model method(CMM)were introduced to determine the stress thresholds of rocks.Finally,the stress thresholds of 9 different rocks were identified by ACLM,CRM,and CMM.The results show that the theoretical stress−strain curves obtained from the two damage constitutive models are in good agreement with that of the experimental data,and the differences between the two damage constitutive models mainly come from the evolutionary differences of the damage variables.The results of the stress thresholds identified by the CMM are in good agreement with those identified by the AE methods,i.e.,ACLM and CRM.Therefore,the proposed CMM can be used to determine the stress thresholds of rocks.展开更多
Background Ultrasonic tactile representation utilizes focused ultrasound to create tactile sensations on the bare skin of a user's hand that is not in contact with a device.This study is a preliminary investigatio...Background Ultrasonic tactile representation utilizes focused ultrasound to create tactile sensations on the bare skin of a user's hand that is not in contact with a device.This study is a preliminary investigation on whether different ultrasonic haptic rendering methods have an impact on the perceptual threshold.Methods This study conducted experiments with the adaptive step method to obtain participants'perceptual thresholds.We examine(1)whether different parts on the palm of the hand have different perceptual thresholds;(2)whether the perceptual threshold is different when the ultrasonic focus point is stationary and when it moves in different trajectories;(3)whether different moving speeds of the ultrasonic focus point have an influence on the perceptual threshold;and(4)whether the addition of a DC offset to the modulating wave has an impact on the perceptual threshold.Results The results show that the center of the palm is more sensitive to ultrasonic haptics than the fingertip;compared with a fast-moving focus point,the palm is more sensitive to a stationary and slow-moving focus point.When the modulating wave has a DC offset,the palm is sensitive to a much smaller modulation amplitude.Conclusion For the future ultrasonic tactile representation systems,dynamic adjustment of intensity is required to compensate the difference in perceptual thresholds under different rendering methods to achieve more realistic ultrasonic haptics.展开更多
To obtain the precise calculation method for the peak energy density and energy evolution properties of rocks subjected to uniaxial compression(UC)before the post-peak stage,particularly at s0.9sc(s denotes stress and...To obtain the precise calculation method for the peak energy density and energy evolution properties of rocks subjected to uniaxial compression(UC)before the post-peak stage,particularly at s0.9sc(s denotes stress and sc is the peak strength),extensive UC and uniaxial graded cyclical loading-unloading(GCLU)tests were performed on four rock types.In the GCLU tests,four unloading stress levels were designated when σ<0.9σc and six unloading stress levels were designated forσ≥0.9σc.The variations in the elastic energy density(ue),dissipative energy density(ud),and energy storage efficiency(C)for the four rock types under GCLU tests were analyzed.Based on the variation of ue whenσ≥0:9σc,a method for calculating the peak energy density was proposed.The energy evolution in rock under UC condition before the post-peak stage was examined.The relationship between C0.9(C atσ≥0:9σc)and mechanical behavior of rocks was explored,and the damage evolution of rock was analyzed in view of energy.Compared with that of the three existing methods,the accuracy of the calculation method of peak energy density proposed in this study is higher.These findings could provide a theoretical foundation for more accurately revealing the failure behavior of rock from an energy perspective.展开更多
Two dimensional(2 D) entropy method has to pay the price of time when applied to image segmentation. So the genetic algorithm is introduced to improve the computational efficiency of the 2 D entropy method. The pro...Two dimensional(2 D) entropy method has to pay the price of time when applied to image segmentation. So the genetic algorithm is introduced to improve the computational efficiency of the 2 D entropy method. The proposed method uses both the gray value of a pixel and the local average gray value of an image. At the same time, the simple genetic algorithm is improved by using better reproduction and crossover operators. Thus the proposed method makes up the 2 D entropy method’s drawback of being time consuming, and yields satisfactory segmentation results. Experimental results show that the proposed method can save computational time when it provides good quality segmentation.展开更多
Based on the particle-in-cell technology and the secondary electron emission theory, a three-dimensional simulation method for multipactor is presented in this paper. By combining the finite difference time domain met...Based on the particle-in-cell technology and the secondary electron emission theory, a three-dimensional simulation method for multipactor is presented in this paper. By combining the finite difference time domain method and the panicle tracing method, such an algorithm is self-consistent and accurate since the interaction between electromagnetic fields and particles is properly modeled. In the time domain aspect, the generation of multipactor can be easily visualized, which makes it possible to gain a deeper insight into the physical mechanism of this effect. In addition to the classic secondary electron emission model, the measured practical secondary electron yield is used, which increases the accuracy of the algorithm. In order to validate the method, the impedance transformer and ridge waveguide filter are studied. By analyzing the evolution of the secondaries obtained by our method, multipactor thresholds of these components are estimated, which show good agreement with the experimental results. Furthermore, the most sensitive positions where multipactor occurs are determined from the phase focusing phenomenon, which is very meaningful for multipactor analysis and design.展开更多
In this paper, a comprehensive energy function is used to formulate the three most popular objective functions:Kapur's, Otsu and Tsalli's functions for performing effective multilevel color image thresholding....In this paper, a comprehensive energy function is used to formulate the three most popular objective functions:Kapur's, Otsu and Tsalli's functions for performing effective multilevel color image thresholding. These new energy based objective criterions are further combined with the proficient search capability of swarm based algorithms to improve the efficiency and robustness. The proposed multilevel thresholding approach accurately determines the optimal threshold values by using generated energy curve, and acutely distinguishes different objects within the multi-channel complex images. The performance evaluation indices and experiments on different test images illustrate that Kapur's entropy aided with differential evolution and bacterial foraging optimization algorithm generates the most accurate and visually pleasing segmented images.展开更多
We proposed an enhanced image binarization method.The proposed solution incorporates Monte-Carlo simulation into the local thresholding method to address the essential issues with respect to complex background,spatial...We proposed an enhanced image binarization method.The proposed solution incorporates Monte-Carlo simulation into the local thresholding method to address the essential issues with respect to complex background,spatially-changed illumination,and uncertainties of block size in traditional method.The proposed method first partitions the image into square blocks that reflect local characteristics of the image.After image partitioning,each block is binarized using Otsu’s thresholding method.To minimize the influence of the block size and the boundary effect,we incorporate Monte-Carlo simulation into the binarization algorithm.Iterative calculation with varying block sizes during Monte-Carlo simulation generates a probability map,which illustrates the probability of each pixel classified as foreground.By setting a probability threshold,and separating foreground and background of the source image,the final binary image can be obtained.The described method has been tested by benchmark tests.Results demonstrate that the proposed method performs well in dealing with the complex background and illumination condition.展开更多
基金2023 Liaoning Institute of Science and Technology Doctoral Program Launch fund(No.2307B29).
文摘A clock bias data processing method based on interval correlation coefficient wavelet threshold denoising is suggested for minor mistakes in clock bias data in order to increase the efficacy of satellite clock bias prediction.Wavelet analysis was first used to break down the satellite clock frequency data into several levels,producing high and low frequency coefficients for each layer.The correlation coefficients of the high and low frequency coefficients in each of the three sub-intervals created by splitting these coefficients were then determined.The major noise region—the sub-interval with the lowest correlation coefficient—was chosen for thresholding treatment and noise threshold computation.The clock frequency data was then processed using wavelet reconstruction and reconverted to clock data.Lastly,three different kinds of satellite clock data—RTS,whu-o,and IGS-F—were used to confirm the produced data.Our method enhanced the stability of the Quadratic Polynomial(QP)model’s predictions for the C16 satellite by about 40%,according to the results.The accuracy and stability of the Auto Regression Integrated Moving Average(ARIMA)model improved up to 41.8%and 14.2%,respectively,whilst the Wavelet Neural Network(WNN)model improved by roughly 27.8%and 63.6%,respectively.Although our method has little effect on forecasting IGS-F series satellites,the experimental findings show that it can improve the accuracy and stability of QP,ARIMA,and WNN model forecasts for RTS and whu-o satellite clock bias.
基金financially supported by the National Natural Science Foundation of China(No.52473228).
文摘The fatigue resistance of casting polyurethane(CPU)is crucial in various sectors,such as construction,healthcare,and the automotive industry.Despite its importance,no studies have reported on the fatigue threshold of CPU.This study employed an advanced Intrinsic Strength Analyzer(ISA)to evaluate the fatigue threshold of CPUs,systematically exploring the effects of three types of isocyanates(PPDI,NDI,TDI)that contribute to hard segment structures based on the cutting method.Employing multiple advanced characterization techniques(XRD,TEM,DSC,AFM),the results indicate that PPDI-based polyurethane exhibits the highest fatigue threshold(182.89 J/m^(2))due to a highest phase separation and a densely packed spherulitic structure,although the hydrogen bonding degree is the lowest(48.3%).Conversely,NDI-based polyurethane,despite having the high hydrogen bonding degree(53.6%),exhibits moderate fatigue performance(122.52 J/m^(2)),likely due to a more scattered microstructure.TDI-based polyurethane,with the highest hydrogen bonding degree(59.1%)but absence of spherulitic structure,shows the lowest fatigue threshold(46.43 J/m^(2)).Compared to common rubbers(NR,NBR,EPDM,BR),the superior fatigue performance of CPU is attributed to its well-organized microstructure,polyurethane possesses a higher fatigue threshold due to its high phase separation degree and orderly and dense spherulitic structure which enhances energy dissipation and reduces crack propagation.
文摘In the multilevel thresholding segmentation of the image, the classification number is always given by the supervisor. To solve this problem, a fast multilevel thresholding algorithm considering both the threshold value and the classification number is proposed based on the maximum entropy, and the self-adaptive criterion of the classification number is given. The algorithm can obtain thresholds and automatically decide the classification number. Experimental results show that the algorithm is effective.
文摘Cost-effectiveness analysis（CEA） is increasingly important in health care decision making.Cost-effectiveness threshold is a critical parameter in the cost-effectiveness analysis.This review introduces the concept of cost-effectiveness threshold, summarizes its determining methods,and classifies the existing methods into two kinds according to budget constraints,then analyzes the merit and demerit of every methods.When there is a flexible budget,the methods for determining the cost-effectiveness threshold include inferring the threshold from previous decisions,comparison with other health care technology or transfer from elsewhere in the public sector,social willingness-to-pay approach,GDP per capita criteria,and rule of thumb.When there is a fixed budget,the methods for determining the cost-effectiveness threshold include shadow price approach,opportunity cost approach,and ICER threshold-searcher model.Each approach to determining threshold has its strength and weakness.The aim of this article is to introduce the existing methods and discuss the features of each method.The background information,such as the definition of threshold,is also described.The basic theory of cost-effectiveness threshold is elaborated,and we recommend the establishment of a cost-effectiveness threshold in the Chinese health care.
基金supported by the National Natural Science Foundation of China(Nos.40830742 and 40901007)
文摘Debris flows are the one type of natural disaster that is most closely associated with hu- man activities. Debris flows are characterized as being widely distributed and frequently activated. Rainfall is an important component of debris flows and is the most active factor when debris flows oc- cur. Rainfall also determines the temporal and spatial distribution characteristics of the hazards. A reasonable rainfall threshold target is essential to ensuring the accuracy of debris flow pre-warning. Such a threshold is important for the study of the mechanisms of debris flow formation, predicting the characteristics of future activities and the design of prevention and engineering control measures. Most mountainous areas have little data regarding rainfall and hazards, especially in debris flow forming re- gions. Therefore, both the traditional demonstration method and frequency calculated method cannot satisfy the debris flow pre-warning requirements. This study presents the characteristics of pre-warning regions, included the rainfall, hydrologic and topographic conditions. An analogous area with abundant data and the same conditions as the pre-warning region was selected, and the rainfall threshold was calculated by proxy. This method resolved the problem of debris flow pre-warning in ar- eas lacking data and provided a new approach for debris flow pre-warning in mountainous areas.
基金the National Natural Science Foundation of China(Grant No.51534002)the Special Funds for Technological Innovation and Entrepreneurship of China Coal Science and Engineering Group Co.Ltd.(2018-TDMS011)。
文摘During the microstructural analysis of weakly cemented sandstone,the granule components and ductile structural parts of the sandstone are typically generalized.Considering the contact between granules in the microstructure of weakly cemented sandstone,three basic units can be determined:regular tetrahedra,regular hexahedra,and regular octahedra.Renormalization group models with granule-and pore-centered weakly cemented sandstone were established,and,according to the renormalization group transformation rule,the critical stress threshold of damage was calculated.The results show that the renormalization model using regular octahedra as the basic units has the highest critical stress threshold.The threshold obtained by iterative calculations of the granule-centered model is smaller than that obtained by the pore-centered model.The granule-centered calculation provides the lower limit(18.12%),and the pore-centered model provides the upper limit(36.36%).Within this range,the weakly cemented sandstone is in a phase-like critical state.That is,the state of granule aggregation transforms from continuous to discrete.In the relative stress range of 18.12%-36.36%,the weakly cemented sandstone exhibits an increased proportion of high-frequency signals(by 83.3%)and a decreased proportion of low-frequency signals(by 23.6%).The renormalization calculation results for weakly cemented sandstone explain the high-low frequency conversion of acoustic emission signals during loading.The research reported in this paper has important significance for elucidating the damage mechanism of weakly cemented sandstone.
基金Supported by the National Nature Science Foundation of China(50099620)the Project of Chenguang Plan in Wuhan(985003062)
文摘This paper analyzes the characteristics of the output gradient histogram and shortages of several traditional automatic threshold methods in order to segment the gradient image better.Then an improved double-threshold method is proposed,which is combined with the method of maximum classes variance,estimating-area method and double-threshold method.This method can automatically select two different thresholds to segment gradient images.The computer simulation is performed on the traditional methods and this algorithm and proves that this method can get satisfying result.
文摘The purpose of this study is to apply different thresholding in mammogram images, and then we will determine which technique is the best in thresholding (extraction) malignant and benign tumors from the rest breast tissues. The used technique is Otsu method, because it is one of the most effective methods for most real world views with regard to uniformity and shape measures. Also, we present all the thresholding methods that used the concept of between class variance. We found from the experimental results that all the used thresholding techniques work well in detection normal breast tissues. But in abnormal tissues (breast tumors), we found that only neighborhood valley emphasis method gave best detection of malignant tumors. Also, the results demonstrate that variance and intensity contrast technique is the best in extraction the micro calcifications which represent the first signs of breast cancer.
基金This work is supported by the National Key Research and Development Plan of China under Grants No.2018YFC1503604the National Natural Science Foundation of China under Grants No.41721003,No.42074007the Key Laboratory of Geospace Environment and Geodesy,Ministry of Education,Wuhan University,No.19-01-08。
文摘As an important model for explaining the seismic rupture mode,the asperity model plays an important role in studying the stress accumulation of faults and the location of earthquake initiation.Taking Qilian-Haiyuan fault as an example,this paper combines geodetic method and b-value method to propose a multi-source observation data fusion detection method that accurately determines the asperity boundary named dual threshold search method.The method is based on the criterion that the b-value asperity boundary should be most consistent with the slip deficit rate asperity boundary.Then the optimal threshold combination of slip deficit rate and b-value is obtained through threshold search,which can be used to determine the boundary of the asperity.Based on this method,the study finds that there are four potential asperities on the Qilian-Haiyuan fault:two asperities(A1 and A2)are on the Tuolaishan segment and the other two asperities(B and C)are on Lenglongling segment and Jinqianghe segment,respectively.Among them,the lengths of asperities A1 and A2 on Tuolaishan segment are 17.0 km and 64.8 km,respectively.And the lower boundaries are 5.5 km and 15.5 km,respectively;The length of asperity B on Lenglongling segment is 70.7 km,and the lower boundary is 10.2 km.The length of asperity C on Jinqianghe segment is 42.3 km,and the lower boundary is 8.3 km.
基金supported by the National Natural Science Foundations of China(Nos.61136002,61472324)the Natural Science Foundation of Shanxi Province(No.2014JM8331)
文摘To overcome the shortcoming that the traditional minimum error threshold method can obtain satisfactory image segmentation results only when the object and background of the image strictly obey a certain type of probability distribution,one proposes the regularized minimum error threshold method and treats the traditional minimum error threshold method as its special case.Then one constructs the discrete probability distribution by using the separation between segmentation threshold and the average gray-scale values of the object and background of the image so as to compute the information energy of the probability distribution.The impact of the regularized parameter selection on the optimal segmentation threshold of the regularized minimum error threshold method is investigated.To verify the effectiveness of the proposed regularized minimum error threshold method,one selects typical grey-scale images and performs segmentation tests.The segmentation results obtained by the regularized minimum error threshold method are compared with those obtained with the traditional minimum error threshold method.The segmentation results and their analysis show that the regularized minimum error threshold method is feasible and produces more satisfactory segmentation results than the minimum error threshold method.It does not exert much impact on object acquisition in case of the addition of a certain noise to an image.Therefore,the method can meet the requirements for extracting a real object in the noisy environment.
基金Project (20010101) supported by the Ministry of Landand Resource of China
文摘The research of land use and land cover (LUCC) is an important aspect in the global change research. The goal of this study is to find methods of extraction of LUCC’s change outlined and change type from remotely sensed data. Take the country of Fengxian in Shanghai as an example, it was supposed two steps to finish extraction of LUCC information: the first step was to use different methods, which is used to outline change areas; the second step include methods of false composing of two-temporal and threshold value. Through combining two methods, a model rule is built and the LUCC product is obtained, four kinds of change type within the study area are given, and the results are obvious. Finally, the results support the application of the high resolution image and tasseled cap composition (greenness and wetness) in the specific regional too.
基金financially supported by the National Key Research and Development Program of China(Grant No.2023YFC3200026)the National Natural Science Foundation of China(Grant No.U2243238)。
文摘Channel avulsion is a natural phenomenon that occurs abruptly on alluvial river deltas,which can affect the channel stability.The causes for avulsion could be generally categorized as topography-and flood-driven factors.However,previous studies on avulsion thresholds usually focused on topography-driven factors due to the centurial or millennial avulsion timescales of the world’s most deltas,but neglected the impacts of flood-driven factors.In the current study,a novel demarcation equation including the two driven factors was proposed,with the decadal timescale of avulsion being considered in the Yellow River Estuary(YRE).In order to quantify the contributions of different factors in each category,an entropy-based methodology was used to calculate the contributing weights of these factors.The factor with the highest weight in each category was then used to construct the demarcation equation,based on avulsion datasets associated with the YRE.An avulsion threshold was deduced according to the demarcation equation.This avulsion threshold was then applied to conduct the risk assessment of avulsion in the YRE.The results show that:two dominant factors cover respectively geomorphic coefficient representing the topography-driven factor and fluvial erosion intensity representing the flood-driven factor,which were thus employed to define a two dimensional mathematical space in which the demarcation equation can be obtained;the avulsion threshold derived from the equation was also applied in the risk assessment of avulsion;and the avulsion threshold proposed in this study is more accurate,as compared with the existing thresholds.
基金Projects(2021RC3007,2020RC3090)supported by the Science and Technology Innovation Program of Hunan Province,ChinaProjects(52374150,52174099)supported by the National Natural Science Foundation of China。
文摘Four key stress thresholds exist in the compression process of rocks,i.e.,crack closure stress(σ_(cc)),crack initiation stress(σ_(ci)),crack damage stress(σ_(cd))and compressive strength(σ_(c)).The quantitative identifications of the first three stress thresholds are of great significance for characterizing the microcrack growth and damage evolution of rocks under compression.In this paper,a new method based on damage constitutive model is proposed to quantitatively measure the stress thresholds of rocks.Firstly,two different damage constitutive models were constructed based on acoustic emission(AE)counts and Weibull distribution function considering the compaction stages of the rock and the bearing capacity of the damage element.Then,the accumulative AE counts method(ACLM),AE count rate method(CRM)and constitutive model method(CMM)were introduced to determine the stress thresholds of rocks.Finally,the stress thresholds of 9 different rocks were identified by ACLM,CRM,and CMM.The results show that the theoretical stress−strain curves obtained from the two damage constitutive models are in good agreement with that of the experimental data,and the differences between the two damage constitutive models mainly come from the evolutionary differences of the damage variables.The results of the stress thresholds identified by the CMM are in good agreement with those identified by the AE methods,i.e.,ACLM and CRM.Therefore,the proposed CMM can be used to determine the stress thresholds of rocks.
基金the National Key Research and Development Program(2016YFB1001304)and the National Natural Science Foundation of China(61631010).
文摘Background Ultrasonic tactile representation utilizes focused ultrasound to create tactile sensations on the bare skin of a user's hand that is not in contact with a device.This study is a preliminary investigation on whether different ultrasonic haptic rendering methods have an impact on the perceptual threshold.Methods This study conducted experiments with the adaptive step method to obtain participants'perceptual thresholds.We examine(1)whether different parts on the palm of the hand have different perceptual thresholds;(2)whether the perceptual threshold is different when the ultrasonic focus point is stationary and when it moves in different trajectories;(3)whether different moving speeds of the ultrasonic focus point have an influence on the perceptual threshold;and(4)whether the addition of a DC offset to the modulating wave has an impact on the perceptual threshold.Results The results show that the center of the palm is more sensitive to ultrasonic haptics than the fingertip;compared with a fast-moving focus point,the palm is more sensitive to a stationary and slow-moving focus point.When the modulating wave has a DC offset,the palm is sensitive to a much smaller modulation amplitude.Conclusion For the future ultrasonic tactile representation systems,dynamic adjustment of intensity is required to compensate the difference in perceptual thresholds under different rendering methods to achieve more realistic ultrasonic haptics.
基金the National Natural Science Foundation of China(Grant Nos.52104133 and 52304227)the Postdoctoral Foundation of Henan Province(Grant No.HN2022015)are appreciated.
文摘To obtain the precise calculation method for the peak energy density and energy evolution properties of rocks subjected to uniaxial compression(UC)before the post-peak stage,particularly at s0.9sc(s denotes stress and sc is the peak strength),extensive UC and uniaxial graded cyclical loading-unloading(GCLU)tests were performed on four rock types.In the GCLU tests,four unloading stress levels were designated when σ<0.9σc and six unloading stress levels were designated forσ≥0.9σc.The variations in the elastic energy density(ue),dissipative energy density(ud),and energy storage efficiency(C)for the four rock types under GCLU tests were analyzed.Based on the variation of ue whenσ≥0:9σc,a method for calculating the peak energy density was proposed.The energy evolution in rock under UC condition before the post-peak stage was examined.The relationship between C0.9(C atσ≥0:9σc)and mechanical behavior of rocks was explored,and the damage evolution of rock was analyzed in view of energy.Compared with that of the three existing methods,the accuracy of the calculation method of peak energy density proposed in this study is higher.These findings could provide a theoretical foundation for more accurately revealing the failure behavior of rock from an energy perspective.
文摘Two dimensional(2 D) entropy method has to pay the price of time when applied to image segmentation. So the genetic algorithm is introduced to improve the computational efficiency of the 2 D entropy method. The proposed method uses both the gray value of a pixel and the local average gray value of an image. At the same time, the simple genetic algorithm is improved by using better reproduction and crossover operators. Thus the proposed method makes up the 2 D entropy method’s drawback of being time consuming, and yields satisfactory segmentation results. Experimental results show that the proposed method can save computational time when it provides good quality segmentation.
基金Project supported by the National Key Laboratory Foundation,China(Grant No.9140C530103110C5301)
文摘Based on the particle-in-cell technology and the secondary electron emission theory, a three-dimensional simulation method for multipactor is presented in this paper. By combining the finite difference time domain method and the panicle tracing method, such an algorithm is self-consistent and accurate since the interaction between electromagnetic fields and particles is properly modeled. In the time domain aspect, the generation of multipactor can be easily visualized, which makes it possible to gain a deeper insight into the physical mechanism of this effect. In addition to the classic secondary electron emission model, the measured practical secondary electron yield is used, which increases the accuracy of the algorithm. In order to validate the method, the impedance transformer and ridge waveguide filter are studied. By analyzing the evolution of the secondaries obtained by our method, multipactor thresholds of these components are estimated, which show good agreement with the experimental results. Furthermore, the most sensitive positions where multipactor occurs are determined from the phase focusing phenomenon, which is very meaningful for multipactor analysis and design.
文摘In this paper, a comprehensive energy function is used to formulate the three most popular objective functions:Kapur's, Otsu and Tsalli's functions for performing effective multilevel color image thresholding. These new energy based objective criterions are further combined with the proficient search capability of swarm based algorithms to improve the efficiency and robustness. The proposed multilevel thresholding approach accurately determines the optimal threshold values by using generated energy curve, and acutely distinguishes different objects within the multi-channel complex images. The performance evaluation indices and experiments on different test images illustrate that Kapur's entropy aided with differential evolution and bacterial foraging optimization algorithm generates the most accurate and visually pleasing segmented images.
基金Project(2018YFC1505401)supported by the National Key R&D Program of ChinaProject(41702310)supported by the National Natural Science Foundation of China+1 种基金Project(SKLGP2017K014)supported by the Foundation of State Key Laboratory of Geohazard Prevention and Geo-environment Protection,ChinaProject(2018JJ3644)supported by the Natural Science Foundation of Hunan Province,China
文摘We proposed an enhanced image binarization method.The proposed solution incorporates Monte-Carlo simulation into the local thresholding method to address the essential issues with respect to complex background,spatially-changed illumination,and uncertainties of block size in traditional method.The proposed method first partitions the image into square blocks that reflect local characteristics of the image.After image partitioning,each block is binarized using Otsu’s thresholding method.To minimize the influence of the block size and the boundary effect,we incorporate Monte-Carlo simulation into the binarization algorithm.Iterative calculation with varying block sizes during Monte-Carlo simulation generates a probability map,which illustrates the probability of each pixel classified as foreground.By setting a probability threshold,and separating foreground and background of the source image,the final binary image can be obtained.The described method has been tested by benchmark tests.Results demonstrate that the proposed method performs well in dealing with the complex background and illumination condition.
