Three-dimensional curved shock wave/boundary layer interaction with streamwise and spanwise curvatures widely exists in practical aerodynamic design.To explore the effects of composite shock curvatures on boundary lay...Three-dimensional curved shock wave/boundary layer interaction with streamwise and spanwise curvatures widely exists in practical aerodynamic design.To explore the effects of composite shock curvatures on boundary layer separation,a canonical model with a cone placed above plate was utilized as a reference.Configurations of straight,convex,and concave conical shock waves inducing the curved conical shock wave/boundary layer interactions were studied,using CFD based on Reynolds-averaged numerical simulation method.The flow structure and separation region of each case were discussed quantitively on the symmetry plane,flat plate,and plane perpendicular to flow direction,respectively.The focus of the analysis was on the characteristic patterns of separation scale variation in the streamwise and spanwise directions,which were observed to consistently change with respect to both directions with alterations in the incident shock wave shape.A simplified control volume model was established to qualitatively discuss the influence source of curved shock waves on separation scales,based on mass conservation equations.The results suggest that the curved shock wave has a holistic effect on separation,which is not solely dependent on the shock foot strength.展开更多
The three-dimensional spectral analysis method was applied to airglow data from September 2023 to August 2024 derivedfrom an OH airglow imager located at the Hejing station (42.79°N, 83.73°E) to study the pr...The three-dimensional spectral analysis method was applied to airglow data from September 2023 to August 2024 derivedfrom an OH airglow imager located at the Hejing station (42.79°N, 83.73°E) to study the propagation characteristics of gravity waves(GWs) over Northwest China. We found that obvious seasonal variations occur in the propagation of GWs. In spring, GWs mainlypropagate in the northeast direction. In summer and autumn, GWs mainly propagate in the north direction. However, GWs mainlypropagate in the south direction in winter. The direction of GW propagation in the zonal direction is controlled by the wind-filteringeffect, whereas the north–south meridional direction is mainly determined by the location of the wave source. We found that the averageenergy spectrum exhibits a 10%–20% higher intensity in summer and winter compared with spring and autumn. For the first time, wereport the seasonal variation characteristics of GWs over the inland areas of Northwest China, which is of great significance forunderstanding the regional distribution characteristics of GWs.展开更多
A three-dimensional wave radiation stress is introduced into the hydrodynamic sediment coupled model COHERENS-SED, which has been developed through introducing wave-enhanced bottom shear stress, wave dependent surface...A three-dimensional wave radiation stress is introduced into the hydrodynamic sediment coupled model COHERENS-SED, which has been developed through introducing wave-enhanced bottom shear stress, wave dependent surface drag coefficient, wave-induced surface mixing, SWAN, damping function of sediment on turbulence, sediment model and depth-dependent wave radiation stress to COHERENS. The COHERENS-SED is adopted to study the effects induced by wave-induced three-dimensional longshore current on suspended sediment spreading of the Huanghe River （Yellow River） mouth. Several different cases divided by setting different wave parameters of inputting boundary waves are carried out. The modeling results agree with measurement data. In terms of simulation results, it is easy to know that three-dimensional wave radiation stress plays an obvious role when inputting boundary wave height is stronger than 3 m. Moreover, wave direction also affects the sediment spreading rules of the mouth strongly too.展开更多
Traffic engineering such as tunnels in various altitudinal gradient zone are at risk of accidental explosion,which can damage personnel and equipment.Accurate prediction of the distribution pattern of explosive loads ...Traffic engineering such as tunnels in various altitudinal gradient zone are at risk of accidental explosion,which can damage personnel and equipment.Accurate prediction of the distribution pattern of explosive loads and shock wave propagation process in semi-enclosed structures at various altitude environment is key research focus in the fields of explosion shock and fluid dynamics.The effect of altitude on the propagation of shock waves in tunnels was investigated by conducting explosion test and numerical simulation.Based on the experimental and numerical simulation results,a prediction model for the attenuation of the peak overpressure of tunnel shock waves at different altitudes was established.The results showed that the peak overpressure decreased at the same measurement points in the tunnel entrance under the high altitude condition.In contrast,an increase in altitude accelerated the propagation speed of the shock wave in the tunnel.The average error between the peak shock wave overpressure obtained using the overpressure prediction formula and the measured test data was less than15%,the average error between the propagation velocity of shock waves predicted values and the test data is less than 10%.The method can effectively predict the overpressure attenuation of blast wave in tunnel at various altitudes.展开更多
In order to obtain high-performance electromagnetic wave absorbers,the adjustment of structure and components is essential.Based on the above requirements,this system forms a three-dimensional frame structure consisti...In order to obtain high-performance electromagnetic wave absorbers,the adjustment of structure and components is essential.Based on the above requirements,this system forms a three-dimensional frame structure consisting of MXene and transition metal oxides(TMOs)through efficient electrostatic self-assembly.This three-dimensional network structure has rich heterojunction structures,which can cause a large amount of interface polarization and conduction losses in incident electromagnetic waves.Hollow structures cause multiple reflections and scattering of electromagnetic waves,which is also an important reason for further increasing electromagnetic wave losses.When the doping ratio is 1:1,the system has the best impedance matching,the maximum effective absorption bandwidth(EAB max)can reach 5.12 GHz at 1.7 mm,and the minimum reflection loss(RL_(min))is-50.30 dB at 1.8 mm.This provides a reference for the subsequent formation of 2D-MXene materials into 3D materials.展开更多
An experimental study is carried out for waves passing an isolated reef terrain in a wave tank. A three-dimensional model of a representative and isolated reef terrain in the West Pacific is built. Random wave trains ...An experimental study is carried out for waves passing an isolated reef terrain in a wave tank. A three-dimensional model of a representative and isolated reef terrain in the West Pacific is built. Random wave trains with various periods and wave heights are generated by a wave maker using the improved JONSWAP spectrum. It is observed that there are different kinds of generation processes and waveforms of freak waves. The freak wave factor Hm/Hs (where Hm is the maximum wave height of wave series, and Hs is significant wave height) is analyzed in detail, in terms of the skewness, kurtosis and water depth, as well as the relationship between freak wave height H& and skewness. The freak wave factor Hm/Hs is found to be in positive correlation with the kurtosis, while larger H[x tends to be related with bigger skewness. The rapid variation of water depth, such as slope and seamount, contributes to the occurrence probability of freak waves.展开更多
BACKGROUND ： Digital subtraction angiography （DSA） is always regarded as the golden standard for diagnosis of intracranial aneurysm; however, the procedure is complex, traumatic, expensive and easy to induce vascul...BACKGROUND ： Digital subtraction angiography （DSA） is always regarded as the golden standard for diagnosis of intracranial aneurysm; however, the procedure is complex, traumatic, expensive and easy to induce vascular complication. Three-dimensional computed tomography angiography （3D-CTA） can make up deficiencies of DSA; therefore, it is used in clinical therapy wider and wider. OBJECTIVE ： To evaluate the clinical effect of 3D-CTA on disruption and hemorrhage of intracranial aneurysm pre- and post-operation and compare with the effect of DSA. DESIGN ： Auto-control contrast observation SETTING ： Department of Neurosurgery, Shengjing Hospital of China Medical University PARTICIPANTS ： A number of 106 patients with disruption and hemorrhage of intracranial aneurysm were selected from the Department of Neurosurgery, Shengjing Hospital of China Medical University from January 2003 to April 2006. All patients were diagnosed with cranial operation and consent. There were 47 males and 59 females aged from 3-76 years with the mean age of （47±13） years. Among them, 82 patients had extensive subarachnoid hemorrhage （SAH）, 7 had hemorrhage at longitudinal fissure, and 17 had hemorrhage at ambiens cistema and lateral fissure. Moreover, intraventricular hematocele was accompanied on 13 patients and hematom on 9 patients. METHODS： （1） 3D-CTA examination： Siemens SOMATOM Sensation 64 CT was used in this study. The thickness was 1 mm and interval of reconstruction was 0.8 mm. Localizing section was plainly scanned as the standard of canthus line. Scan ranged from 30 mm below sella to 50 mm above sella. Non-ion contrast medium of Omnipaque 350 （concentration of iodine was 350 g/L） was inserted into anterior vein of elbow with 18G trochar retained with high-pressured injectoc pum. The speed was 4.5 mL/s and the total volume was 80-100 mL with the means of 90 mL. Scan started at 10-20 s after injection of contrast medium. Original image was dealt with Leonardo workstation and retreated with Syngo software. Volume rendering and maximum intensity projection were used to reconstructed images, （2） All 106 patients suffered from occlusion of aneurysm clamp. Before operation, 3D-CTA was undertaken and DSA was followed. After operation, patients were rechecked with 3D-CTA. MAIN OUTCOME MEASURES： Comparisons between 3D-CTA and DSA. RESULTS ： All 106 patients were involved in the final analysis. （1） Examination of 3D-CTA and DSA： Among 118 patients with aneurysm, 110 were checked with 3D-CTA and the detected rate was 93.2% （110/118）. Among other 8 cases, 3 were negative and checked again with DSA; 1 had pericallosal aneurysm, 1 ophthalmic aneurysm, and 1 anterior choroidal artery of aneurysm. 3D-CTA results of other 5 cases were suspicious, and then, they were regarded as having aneurysm with DSA. Before operation, correlation among site, body, neck of aneurysm and peripheral anatomic structure were shown sufficiently. After operation, 82 patients were rechecked with 3D-CTA, which was complete occlusion, precise, unobvious constriction, emphraxis or remains as compared with 3D-CTA those pre-operation. （2） Characteristics of 3D-CTA： With multiple vessels and angles, 3D-CTA observed the relationship between aneurysm neck and carried artery and showed thrombosis in cavity of aneurysm, calcification of aneurysm wall and peripheral structure of vessel at the same time. However, DSA could not detect the reactions mentioned above. It could delete image of cranium, simulate image of operative route, eliminate artifact induced by metal, but not distinguish blood stream direction. Meanwhile, posterior communicating artery was always poor during circle of Willis artery showing. CONCLUSION： （1） 3D-CTA is characterized by simple operation and non-invasive showing vascular stereo structure and correlation. Therefore, it is significant for diagnosis and designing plan of operative approach and focal location pre-operation and evaluating effect post-operation. （2） 3D-CTA does not completely replace DSA on the diagnosis of intracranial aneurysm.展开更多
In this work,the three-dimensional(3 D)propagation behaviors in the nonlinear phononic crystal and elastic wave metamaterial with initial stresses are investigated.The analytical solutions of the fundamental wave and ...In this work,the three-dimensional(3 D)propagation behaviors in the nonlinear phononic crystal and elastic wave metamaterial with initial stresses are investigated.The analytical solutions of the fundamental wave and second harmonic with the quasilongitudinal(qP)and quasi-shear(qS_(1) and qS_(2))modes are derived.Based on the transfer and stiffness matrices,band gaps with initial stresses are obtained by the Bloch theorem.The transmission coefficients are calculated to support the band gap property,and the tunability of the nonreciprocal transmission by the initial stress is discussed.This work is expected to provide a way to tune the nonreciprocal transmission with vector characteristics.展开更多
A three-dimensional transformed Eulerian-mean(3D TEM) equation under a non-hydrostatic and non-geostrophic assumption is deduced in this study. The vertical component of the 3D wave activity flux deduced here is the p...A three-dimensional transformed Eulerian-mean(3D TEM) equation under a non-hydrostatic and non-geostrophic assumption is deduced in this study. The vertical component of the 3D wave activity flux deduced here is the primary difference from previous studies, which is suitable to mesoscale systems. Using the 3D TEM equation, the energy propagation of the inertia–gravity waves and how the generation and dissipation of the inertia–gravity waves drive the mean flow can be examined. During the mature stage of a heavy precipitation event, the maximum of the Eliassen–Palm(EP) flux divergence is primarily concentrated at the height of 10–14 km, where the energy of the inertia–gravity waves propagates forward(eastward) and upward. Examining the contribution of each term of the 3D TEM equation shows that the EP flux divergence is the primary contributor to the mean flow tendency. The EP flux divergence decelerates the zonal wind above and below the high-level jet at the height of 10 km and 15 km, and accelerates the high-level jet at the height of 12–14 km. This structure enhances the vertical wind shear of the environment and promotes the development of the rainstorm.展开更多
The reflection of three-dimensional(3D) plane waves in a highly anisotropic(triclinic) medium under the context of generalized thermoelasticity is studied. The thermoelastic nature of the 3D plane waves in an anisotro...The reflection of three-dimensional(3D) plane waves in a highly anisotropic(triclinic) medium under the context of generalized thermoelasticity is studied. The thermoelastic nature of the 3D plane waves in an anisotropic medium is investigated in the perspective of the three-phase-lag(TPL), dual-phase-lag(DPL), Green-Naghdi-III(GNIII), Lord-Shulman(LS), and classical coupled(CL) theories. The reflection coefficients and energy ratios for all the reflected waves are obtained in a mathematical form. The rotational effects on the reflection characteristics of the 3D waves are discussed under the context of generalized thermoelasticity. Comparative analyses for the reflection coefficients of the waves among these generalized thermoelastic theories are performed. The energy ratios for each of the reflected waves establish the energy conservation law in the reflection phenomena of the plane waves. The highly anisotropic materials along with the rotation may have a significant role in the phenomenon of the reflection behavior of the 3D waves. Numerical computations are performed for the graphical representation of the study.展开更多
In this work,hierarchical hybrid composites consisting of porous three-dimensional reduced graphene oxide(3D-rGO)skeleton and lamellar boron nitride(BN)/silicon carbide(SiC)coatings are prepared by chemical vapor infi...In this work,hierarchical hybrid composites consisting of porous three-dimensional reduced graphene oxide(3D-rGO)skeleton and lamellar boron nitride(BN)/silicon carbide(SiC)coatings are prepared by chemical vapor infiltration(CVI)process.The graphene framework prepared by 3D printing and frozen self-assembly exhibits a lightweight structure and a perforated conductive network,which extends the transmission path of incident microwaves.The introduced ceramic coatings can effectively tune the impedance matching degree and supply a lossy phase,and the hierarchical structure of the composites enhances the multiple scattering of the incident microwaves.As expected,the 3D-rGO/BN/SiC composites possess an excellent absorbing performance with a minimum reflection loss value of–37.8 dB,and the widest effective absorbing bandwidth(RL<–10 dB)of 5.90 GHz is obtained.The controllable fabrication of composites can provide a guideline for rational design and fabrication of high-performance electromagnetic waves absorbing materials in practical applications.展开更多
-The necessity of using irregular waves, especially multi- directional waves to conduct three-dimensional model tests for port engineering and the test method are described in this paper through an example of model te...-The necessity of using irregular waves, especially multi- directional waves to conduct three-dimensional model tests for port engineering and the test method are described in this paper through an example of model test for a port. The test results show that a deep navigation channel has a large effect on the waves in front of the breakwater near the port entrance and on the wave condition in the port.展开更多
A frequency domain analysis method based on the three-dimensional translating-pulsating （3DTP） source Green function is developed to investigate wave loads and free motions of two ships advancing on parallel course ...A frequency domain analysis method based on the three-dimensional translating-pulsating （3DTP） source Green function is developed to investigate wave loads and free motions of two ships advancing on parallel course in waves. Two experiments are carried out respectively to mea- sure the wave loads and the free motions for a pair of side-by- side arranged ship models advancing with an identical speed in head regular waves. For comparison, each model is also tested alone. Predictions obtained by the present solution are found in favorable agreement with the model tests and are more accurate than the traditional method based on the three dimensional pulsating （3DP） source Green function. Numer- ical resonances and peak shift can be found in the 3DP pre- dictions, which result from the wave energy trapped in the gap between two ships and the extremely inhomogeneous wave load distribution on each hull. However, they can be eliminated by 3DTP, in which the speed affects the free sur- face and most of the wave energy can be escaped from the gap. Both the experiment and the present prediction show that hydrodynamic interaction effects on wave loads and free motions are significant. The present solver may serve as a validated tool to predict wave loads and motions of two ves- sels under replenishment at sea, and may help to evaluate the hydrodynamic interaction effects on the ships safety in replenishment operation.展开更多
Based on the previous researches on scattering theory, a model of single and multiple scattering in a three-dimensional infinite medium with non-zero hypocentral distance is proposed in this paper. According to the as...Based on the previous researches on scattering theory, a model of single and multiple scattering in a three-dimensional infinite medium with non-zero hypocentral distance is proposed in this paper. According to the assumptionof three-dimensional medium with numerous, statistically isotropic and uniformly distributed scatterers, we obtain the analytic form of power spectrum of coda waves for single scattering and the integral form of power spectrum of coda waves for multiple scattering.展开更多
An improved three-dimensional incompressible smooth particle hydrodynamics(ISPH)model is developed to simulate the impact of regular wave on a horizontal plate.The improvement is the employment of a corrective functio...An improved three-dimensional incompressible smooth particle hydrodynamics(ISPH)model is developed to simulate the impact of regular wave on a horizontal plate.The improvement is the employment of a corrective function to enhance angular momentum conservation in a particle-based calculation.And a new estimation method is proposed to predict the pressure on the horizontal plate.Then,the model simulates the variation characteristics of impact pressures generated by regular wave slamming.The main features of velocity field and pressure field near the plate are presented.The present numerical model can be used to study wave impact load on the horizontal plate.展开更多
We present an efficient three-dimensional coupled-mode model based on the Fourier synthesis technique. In principle, this model is a one-way model, and hence provides satisfactory accuracy for problems where the forwa...We present an efficient three-dimensional coupled-mode model based on the Fourier synthesis technique. In principle, this model is a one-way model, and hence provides satisfactory accuracy for problems where the forward scattering dominates. At the same time, this model provides an efficiency gain of an order of magnitude or more over two-way coupled-mode models. This model can be applied to three-dimensional range-dependent problems with a slowly varying bathymetry or internal waves. A numerical example of the latter is demonstrated in this work. Comparisons of both accuracy and efficiency between the present model and a benchmark model are also provided.展开更多
The development of efficient catalysts for hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)is of great significance for the practical application of water splitting in alkaline electrolytes.Transitio...The development of efficient catalysts for hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)is of great significance for the practical application of water splitting in alkaline electrolytes.Transition metal sulfide electrocatalysts have been widely recognized as efficient catalysts for water splitting in alkaline media.In this work,an original and efficient synthesis strategy is proposed for the fabrication of asymmetric anode(N-(Co-Cu)S_(x))and cathode(N-CoS/Cu_(2)S).Impressively,these electrodes exhibit superior performance,benefiting from the construction of three-dimensional(3D)structures and the electronic structure adjustment caused by N-doping with increased active sites,improved mass/charge transport and enhanced evolution and release of gas bubbles.Hence,N-(Co-Cu)S_(x)anode exhibits excellent OER performance with only 217 mV overpotential at 10 mA·cm^(-2),while N-CoS/Cu_(2)S cathode possesses excellent HER performance with only 67 mV overpotential at 10 mA·cm^(-2).N-(Co-Cu)S_(x)||N-CoS/Cu_(2)S electrolyzer presents a low cell voltage of 1.53 V at 10 mA·cm^(-2)toward overall water splitting,which is superior to most recently reported transition metal sulfide-based catalysts.展开更多
Under investigation is the n-component nonlinear Schrödinger equation with higher-order effects,which describes the ultrashort pulses in the birefringent fiber.Based on the Lax pair,the eigenfunction and generali...Under investigation is the n-component nonlinear Schrödinger equation with higher-order effects,which describes the ultrashort pulses in the birefringent fiber.Based on the Lax pair,the eigenfunction and generalized Darboux transformation are derived.Next,we construct several novel higher-order localized waves and classified them into three categories:(i)higher-order rogue waves interacting with bright/antidark breathers,(ii)higher-order breather fission/fusion,(iii)higherorder breather interacting with soliton.Moreover,we explore the effects of parameters on the structure,collision process and energy distribution of localized waves and these characteristics are significantly different from previous ones.Finally,the dynamical properties of these solutions are discussed in detail.展开更多
The future space-borne gravitational wave(GW)detectors would provide a promising probe for the new physics beyond the standard model that admits the first-order phase transitions.The predictions for the GW background ...The future space-borne gravitational wave(GW)detectors would provide a promising probe for the new physics beyond the standard model that admits the first-order phase transitions.The predictions for the GW background vary sensitively among different concrete particle physics models but also share a large degeneracy in the model buildings,which motivates an effective model description on the phase transition based on different patterns of the electroweak symmetry breaking(EWSB).In this paper,using the scalar N-plet model as a demonstration,we propose an effective classification for three different patterns of EWSB:(1)radiative symmetry breaking with classical scale invariance,(2)the Higgs mechanism in a generic scalar extension,and(3)higher-dimensional operators.We conclude that a strong first-order phase transition could be realized for(1)and(2)with a small quartic coupling and a small isospin of an additional N-plet field for the light scalar field model with and without the classical scale invariance,and(3)with a large mixing coupling between scalar fields and a large isospin of the N-plet field for the heavy scalar field model.展开更多
Laser debonding technology has been widely used in advanced chip packaging,such as fan-out integration,2.5D/3D ICs,and MEMS devices.Typically,laser debonding of bonded pairs(R/R separation)is typically achieved by com...Laser debonding technology has been widely used in advanced chip packaging,such as fan-out integration,2.5D/3D ICs,and MEMS devices.Typically,laser debonding of bonded pairs(R/R separation)is typically achieved by completely removing the material from the ablation region within the release material layer at high energy densities.However,this R/R separation method often results in a significant amount of release material and carbonized debris remaining on the surface of the device wafer,severely reducing product yields and cleaning efficiency for ultra-thin device wafers.Here,we proposed an interfacial separation strategy based on laser-induced hot stamping effect and thermoelastic stress wave,which enables stress-free separation of wafer bonding pairs at the interface of the release layer and the adhesive layer(R/A separation).By comprehensively analyzing the micro-morphology and material composition of the release material,we elucidated the laser debonding behavior of bonded pairs under different separation modes.Additionally,we calculated the ablation threshold of the release material in the case of wafer bonding and established the processing window for different separation methods.This work offers a fresh perspective on the development and application of laser debonding technology.The proposed R/A interface separation method is versatile,controllable,and highly reliable,and does not leave release materials and carbonized debris on device wafers,demonstrating strong industrial adaptability,which greatly facilitates the application and development of advanced packaging for ultra-thin chips.展开更多
基金the support of the National Natural Science Foundation of China(Nos.12372295,U21B6003,U20A2069,12302389 and 123B2037)。
文摘Three-dimensional curved shock wave/boundary layer interaction with streamwise and spanwise curvatures widely exists in practical aerodynamic design.To explore the effects of composite shock curvatures on boundary layer separation,a canonical model with a cone placed above plate was utilized as a reference.Configurations of straight,convex,and concave conical shock waves inducing the curved conical shock wave/boundary layer interactions were studied,using CFD based on Reynolds-averaged numerical simulation method.The flow structure and separation region of each case were discussed quantitively on the symmetry plane,flat plate,and plane perpendicular to flow direction,respectively.The focus of the analysis was on the characteristic patterns of separation scale variation in the streamwise and spanwise directions,which were observed to consistently change with respect to both directions with alterations in the incident shock wave shape.A simplified control volume model was established to qualitatively discuss the influence source of curved shock waves on separation scales,based on mass conservation equations.The results suggest that the curved shock wave has a holistic effect on separation,which is not solely dependent on the shock foot strength.
基金supported by the National Science Foundation of China(Grant Nos.42374205 and 41974179)the Specialized Research Fund of the National Space Science Center,Chinese Academy of Sciences(Grant No.E4PD3010)supported by the Specialized Research Fund for State Key Laboratories.
文摘The three-dimensional spectral analysis method was applied to airglow data from September 2023 to August 2024 derivedfrom an OH airglow imager located at the Hejing station (42.79°N, 83.73°E) to study the propagation characteristics of gravity waves(GWs) over Northwest China. We found that obvious seasonal variations occur in the propagation of GWs. In spring, GWs mainlypropagate in the northeast direction. In summer and autumn, GWs mainly propagate in the north direction. However, GWs mainlypropagate in the south direction in winter. The direction of GW propagation in the zonal direction is controlled by the wind-filteringeffect, whereas the north–south meridional direction is mainly determined by the location of the wave source. We found that the averageenergy spectrum exhibits a 10%–20% higher intensity in summer and winter compared with spring and autumn. For the first time, wereport the seasonal variation characteristics of GWs over the inland areas of Northwest China, which is of great significance forunderstanding the regional distribution characteristics of GWs.
基金The Natural Science Foundation Study on Mechanics of Non-breaking wave-induced vertical mixing on Pollutant Dispersion of Huanghe River Estuary under contract No.51179178Project from Establishment of Fine Sediment Transport Modeling System for the Yellow Sea+1 种基金which is a sub-project of Development of Operational Oceanographic systemScience & Technology Development Project of Qingdao under contract No.09-1-3-18-jch
文摘A three-dimensional wave radiation stress is introduced into the hydrodynamic sediment coupled model COHERENS-SED, which has been developed through introducing wave-enhanced bottom shear stress, wave dependent surface drag coefficient, wave-induced surface mixing, SWAN, damping function of sediment on turbulence, sediment model and depth-dependent wave radiation stress to COHERENS. The COHERENS-SED is adopted to study the effects induced by wave-induced three-dimensional longshore current on suspended sediment spreading of the Huanghe River （Yellow River） mouth. Several different cases divided by setting different wave parameters of inputting boundary waves are carried out. The modeling results agree with measurement data. In terms of simulation results, it is easy to know that three-dimensional wave radiation stress plays an obvious role when inputting boundary wave height is stronger than 3 m. Moreover, wave direction also affects the sediment spreading rules of the mouth strongly too.
基金financially supported by National Natural Science Foundation of China(Grant Nos.52378401,52278504)the Fundamental Research Funds for the Central Universities(Grant No.30922010918)。
文摘Traffic engineering such as tunnels in various altitudinal gradient zone are at risk of accidental explosion,which can damage personnel and equipment.Accurate prediction of the distribution pattern of explosive loads and shock wave propagation process in semi-enclosed structures at various altitude environment is key research focus in the fields of explosion shock and fluid dynamics.The effect of altitude on the propagation of shock waves in tunnels was investigated by conducting explosion test and numerical simulation.Based on the experimental and numerical simulation results,a prediction model for the attenuation of the peak overpressure of tunnel shock waves at different altitudes was established.The results showed that the peak overpressure decreased at the same measurement points in the tunnel entrance under the high altitude condition.In contrast,an increase in altitude accelerated the propagation speed of the shock wave in the tunnel.The average error between the peak shock wave overpressure obtained using the overpressure prediction formula and the measured test data was less than15%,the average error between the propagation velocity of shock waves predicted values and the test data is less than 10%.The method can effectively predict the overpressure attenuation of blast wave in tunnel at various altitudes.
基金supported by the National Natural Science Foundation of China(Nos.51407134,52002196)Natural Science Foundation of Shandong Province(Nos.ZR2019YQ24,ZR2020QF084)+1 种基金Taishan Scholars and Young Experts Program of Shandong Province(No.tsqn202103057)the Qingchuang Talents Induction Program of Shandong Higher Education Institution(Research and Innovation Team of Structural-Functional Polymer Composites)and Special Financial of Shandong Province(Structural Design of High-efficiency Electromagnetic Wave-absorbing Composite Materials and Construction of Shandong Provincial Talent Teams(No.37000022P990304116449)).
文摘In order to obtain high-performance electromagnetic wave absorbers,the adjustment of structure and components is essential.Based on the above requirements,this system forms a three-dimensional frame structure consisting of MXene and transition metal oxides(TMOs)through efficient electrostatic self-assembly.This three-dimensional network structure has rich heterojunction structures,which can cause a large amount of interface polarization and conduction losses in incident electromagnetic waves.Hollow structures cause multiple reflections and scattering of electromagnetic waves,which is also an important reason for further increasing electromagnetic wave losses.When the doping ratio is 1:1,the system has the best impedance matching,the maximum effective absorption bandwidth(EAB max)can reach 5.12 GHz at 1.7 mm,and the minimum reflection loss(RL_(min))is-50.30 dB at 1.8 mm.This provides a reference for the subsequent formation of 2D-MXene materials into 3D materials.
基金The Qingdao National Laboratory for Marine Science and Technology under contract No.QNLM20160RP0402the National Natural Science Foundation of China under contract Nos 51522902 and 51579040+1 种基金the Fundamental Research Funds for the Central Universities under contract No.DUT17ZD233the Ministry of Industry and Information Technology of China under contract No.[2016]22
文摘An experimental study is carried out for waves passing an isolated reef terrain in a wave tank. A three-dimensional model of a representative and isolated reef terrain in the West Pacific is built. Random wave trains with various periods and wave heights are generated by a wave maker using the improved JONSWAP spectrum. It is observed that there are different kinds of generation processes and waveforms of freak waves. The freak wave factor Hm/Hs (where Hm is the maximum wave height of wave series, and Hs is significant wave height) is analyzed in detail, in terms of the skewness, kurtosis and water depth, as well as the relationship between freak wave height H& and skewness. The freak wave factor Hm/Hs is found to be in positive correlation with the kurtosis, while larger H[x tends to be related with bigger skewness. The rapid variation of water depth, such as slope and seamount, contributes to the occurrence probability of freak waves.
文摘BACKGROUND ： Digital subtraction angiography （DSA） is always regarded as the golden standard for diagnosis of intracranial aneurysm; however, the procedure is complex, traumatic, expensive and easy to induce vascular complication. Three-dimensional computed tomography angiography （3D-CTA） can make up deficiencies of DSA; therefore, it is used in clinical therapy wider and wider. OBJECTIVE ： To evaluate the clinical effect of 3D-CTA on disruption and hemorrhage of intracranial aneurysm pre- and post-operation and compare with the effect of DSA. DESIGN ： Auto-control contrast observation SETTING ： Department of Neurosurgery, Shengjing Hospital of China Medical University PARTICIPANTS ： A number of 106 patients with disruption and hemorrhage of intracranial aneurysm were selected from the Department of Neurosurgery, Shengjing Hospital of China Medical University from January 2003 to April 2006. All patients were diagnosed with cranial operation and consent. There were 47 males and 59 females aged from 3-76 years with the mean age of （47±13） years. Among them, 82 patients had extensive subarachnoid hemorrhage （SAH）, 7 had hemorrhage at longitudinal fissure, and 17 had hemorrhage at ambiens cistema and lateral fissure. Moreover, intraventricular hematocele was accompanied on 13 patients and hematom on 9 patients. METHODS： （1） 3D-CTA examination： Siemens SOMATOM Sensation 64 CT was used in this study. The thickness was 1 mm and interval of reconstruction was 0.8 mm. Localizing section was plainly scanned as the standard of canthus line. Scan ranged from 30 mm below sella to 50 mm above sella. Non-ion contrast medium of Omnipaque 350 （concentration of iodine was 350 g/L） was inserted into anterior vein of elbow with 18G trochar retained with high-pressured injectoc pum. The speed was 4.5 mL/s and the total volume was 80-100 mL with the means of 90 mL. Scan started at 10-20 s after injection of contrast medium. Original image was dealt with Leonardo workstation and retreated with Syngo software. Volume rendering and maximum intensity projection were used to reconstructed images, （2） All 106 patients suffered from occlusion of aneurysm clamp. Before operation, 3D-CTA was undertaken and DSA was followed. After operation, patients were rechecked with 3D-CTA. MAIN OUTCOME MEASURES： Comparisons between 3D-CTA and DSA. RESULTS ： All 106 patients were involved in the final analysis. （1） Examination of 3D-CTA and DSA： Among 118 patients with aneurysm, 110 were checked with 3D-CTA and the detected rate was 93.2% （110/118）. Among other 8 cases, 3 were negative and checked again with DSA; 1 had pericallosal aneurysm, 1 ophthalmic aneurysm, and 1 anterior choroidal artery of aneurysm. 3D-CTA results of other 5 cases were suspicious, and then, they were regarded as having aneurysm with DSA. Before operation, correlation among site, body, neck of aneurysm and peripheral anatomic structure were shown sufficiently. After operation, 82 patients were rechecked with 3D-CTA, which was complete occlusion, precise, unobvious constriction, emphraxis or remains as compared with 3D-CTA those pre-operation. （2） Characteristics of 3D-CTA： With multiple vessels and angles, 3D-CTA observed the relationship between aneurysm neck and carried artery and showed thrombosis in cavity of aneurysm, calcification of aneurysm wall and peripheral structure of vessel at the same time. However, DSA could not detect the reactions mentioned above. It could delete image of cranium, simulate image of operative route, eliminate artifact induced by metal, but not distinguish blood stream direction. Meanwhile, posterior communicating artery was always poor during circle of Willis artery showing. CONCLUSION： （1） 3D-CTA is characterized by simple operation and non-invasive showing vascular stereo structure and correlation. Therefore, it is significant for diagnosis and designing plan of operative approach and focal location pre-operation and evaluating effect post-operation. （2） 3D-CTA does not completely replace DSA on the diagnosis of intracranial aneurysm.
基金Project supported by the National Natural Science Foundation of China(Nos.11922209,11991031 and 12021002)。
文摘In this work,the three-dimensional(3 D)propagation behaviors in the nonlinear phononic crystal and elastic wave metamaterial with initial stresses are investigated.The analytical solutions of the fundamental wave and second harmonic with the quasilongitudinal(qP)and quasi-shear(qS_(1) and qS_(2))modes are derived.Based on the transfer and stiffness matrices,band gaps with initial stresses are obtained by the Bloch theorem.The transmission coefficients are calculated to support the band gap property,and the tunability of the nonreciprocal transmission by the initial stress is discussed.This work is expected to provide a way to tune the nonreciprocal transmission with vector characteristics.
文摘A three-dimensional transformed Eulerian-mean(3D TEM) equation under a non-hydrostatic and non-geostrophic assumption is deduced in this study. The vertical component of the 3D wave activity flux deduced here is the primary difference from previous studies, which is suitable to mesoscale systems. Using the 3D TEM equation, the energy propagation of the inertia–gravity waves and how the generation and dissipation of the inertia–gravity waves drive the mean flow can be examined. During the mature stage of a heavy precipitation event, the maximum of the Eliassen–Palm(EP) flux divergence is primarily concentrated at the height of 10–14 km, where the energy of the inertia–gravity waves propagates forward(eastward) and upward. Examining the contribution of each term of the 3D TEM equation shows that the EP flux divergence is the primary contributor to the mean flow tendency. The EP flux divergence decelerates the zonal wind above and below the high-level jet at the height of 10 km and 15 km, and accelerates the high-level jet at the height of 12–14 km. This structure enhances the vertical wind shear of the environment and promotes the development of the rainstorm.
基金the National Board for Higher Mathematics of India(NBHM)(No.2/48(3)/2016/NBHM(R.P)/R D Ⅱ/4528)。
文摘The reflection of three-dimensional(3D) plane waves in a highly anisotropic(triclinic) medium under the context of generalized thermoelasticity is studied. The thermoelastic nature of the 3D plane waves in an anisotropic medium is investigated in the perspective of the three-phase-lag(TPL), dual-phase-lag(DPL), Green-Naghdi-III(GNIII), Lord-Shulman(LS), and classical coupled(CL) theories. The reflection coefficients and energy ratios for all the reflected waves are obtained in a mathematical form. The rotational effects on the reflection characteristics of the 3D waves are discussed under the context of generalized thermoelasticity. Comparative analyses for the reflection coefficients of the waves among these generalized thermoelastic theories are performed. The energy ratios for each of the reflected waves establish the energy conservation law in the reflection phenomena of the plane waves. The highly anisotropic materials along with the rotation may have a significant role in the phenomenon of the reflection behavior of the 3D waves. Numerical computations are performed for the graphical representation of the study.
基金supported by the National Natural Science Foundation of China(No.51772310)National Natural Science Foundation of China(No.52222202)+3 种基金Chinese Academy of Sciences Key Research Program of Frontier Sciences(No.QYZDYSSWJSC031)Key Deployment Projects of the Chinese Academy of Sciences(No.ZDRW-CN2019-01)Shanghai Sailing Program(No.21YF1454600)Outstanding Chinese and Foreign Youth Exchange Program of China Association of Science and Technology.
文摘In this work,hierarchical hybrid composites consisting of porous three-dimensional reduced graphene oxide(3D-rGO)skeleton and lamellar boron nitride(BN)/silicon carbide(SiC)coatings are prepared by chemical vapor infiltration(CVI)process.The graphene framework prepared by 3D printing and frozen self-assembly exhibits a lightweight structure and a perforated conductive network,which extends the transmission path of incident microwaves.The introduced ceramic coatings can effectively tune the impedance matching degree and supply a lossy phase,and the hierarchical structure of the composites enhances the multiple scattering of the incident microwaves.As expected,the 3D-rGO/BN/SiC composites possess an excellent absorbing performance with a minimum reflection loss value of–37.8 dB,and the widest effective absorbing bandwidth(RL<–10 dB)of 5.90 GHz is obtained.The controllable fabrication of composites can provide a guideline for rational design and fabrication of high-performance electromagnetic waves absorbing materials in practical applications.
文摘-The necessity of using irregular waves, especially multi- directional waves to conduct three-dimensional model tests for port engineering and the test method are described in this paper through an example of model test for a port. The test results show that a deep navigation channel has a large effect on the waves in front of the breakwater near the port entrance and on the wave condition in the port.
基金supported by the National Natural Science Foundation of China(50879090)the Key Research Program of Hydrodynamics of China(9140A14030712JB11044)
文摘A frequency domain analysis method based on the three-dimensional translating-pulsating （3DTP） source Green function is developed to investigate wave loads and free motions of two ships advancing on parallel course in waves. Two experiments are carried out respectively to mea- sure the wave loads and the free motions for a pair of side-by- side arranged ship models advancing with an identical speed in head regular waves. For comparison, each model is also tested alone. Predictions obtained by the present solution are found in favorable agreement with the model tests and are more accurate than the traditional method based on the three dimensional pulsating （3DP） source Green function. Numer- ical resonances and peak shift can be found in the 3DP pre- dictions, which result from the wave energy trapped in the gap between two ships and the extremely inhomogeneous wave load distribution on each hull. However, they can be eliminated by 3DTP, in which the speed affects the free sur- face and most of the wave energy can be escaped from the gap. Both the experiment and the present prediction show that hydrodynamic interaction effects on wave loads and free motions are significant. The present solver may serve as a validated tool to predict wave loads and motions of two ves- sels under replenishment at sea, and may help to evaluate the hydrodynamic interaction effects on the ships safety in replenishment operation.
文摘Based on the previous researches on scattering theory, a model of single and multiple scattering in a three-dimensional infinite medium with non-zero hypocentral distance is proposed in this paper. According to the assumptionof three-dimensional medium with numerous, statistically isotropic and uniformly distributed scatterers, we obtain the analytic form of power spectrum of coda waves for single scattering and the integral form of power spectrum of coda waves for multiple scattering.
基金Supported by the National Science Foundation of China(51109022)the National Science Foundation of Liaoning Province(201202020)the Key Laboratory Foundation of Dalian University of Technoloty(LP12005)
文摘An improved three-dimensional incompressible smooth particle hydrodynamics(ISPH)model is developed to simulate the impact of regular wave on a horizontal plate.The improvement is the employment of a corrective function to enhance angular momentum conservation in a particle-based calculation.And a new estimation method is proposed to predict the pressure on the horizontal plate.Then,the model simulates the variation characteristics of impact pressures generated by regular wave slamming.The main features of velocity field and pressure field near the plate are presented.The present numerical model can be used to study wave impact load on the horizontal plate.
基金Supported by the National Natural Science Foundation of China under Grant No 11774374the Natural Science Foundation of Shandong Province of China under Grant No ZR2016AL10
文摘We present an efficient three-dimensional coupled-mode model based on the Fourier synthesis technique. In principle, this model is a one-way model, and hence provides satisfactory accuracy for problems where the forward scattering dominates. At the same time, this model provides an efficiency gain of an order of magnitude or more over two-way coupled-mode models. This model can be applied to three-dimensional range-dependent problems with a slowly varying bathymetry or internal waves. A numerical example of the latter is demonstrated in this work. Comparisons of both accuracy and efficiency between the present model and a benchmark model are also provided.
基金supported by the Science and Technology Project of Southwest Petroleum University(No.2021JBGS03)the Local Science and Technology Development Fund Projects Guided by the Central Government of China(No.2021ZYD0060)+2 种基金the National Natural Science Foundation of China(Nos.22209143 and 52371241)Guangdong High-level Innovation Institute Project(Nos.2021B0909050001 and 2021CX02L365)Guangdong Basic and Applied Basic Research Foundation(No.2023B1515120095).
文摘The development of efficient catalysts for hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)is of great significance for the practical application of water splitting in alkaline electrolytes.Transition metal sulfide electrocatalysts have been widely recognized as efficient catalysts for water splitting in alkaline media.In this work,an original and efficient synthesis strategy is proposed for the fabrication of asymmetric anode(N-(Co-Cu)S_(x))and cathode(N-CoS/Cu_(2)S).Impressively,these electrodes exhibit superior performance,benefiting from the construction of three-dimensional(3D)structures and the electronic structure adjustment caused by N-doping with increased active sites,improved mass/charge transport and enhanced evolution and release of gas bubbles.Hence,N-(Co-Cu)S_(x)anode exhibits excellent OER performance with only 217 mV overpotential at 10 mA·cm^(-2),while N-CoS/Cu_(2)S cathode possesses excellent HER performance with only 67 mV overpotential at 10 mA·cm^(-2).N-(Co-Cu)S_(x)||N-CoS/Cu_(2)S electrolyzer presents a low cell voltage of 1.53 V at 10 mA·cm^(-2)toward overall water splitting,which is superior to most recently reported transition metal sulfide-based catalysts.
基金Project supported by the National Natural Science Foundation of China(Grant No.12271096)the Natural Science Foundation of Fujian Province(Grant No.2021J01302)。
文摘Under investigation is the n-component nonlinear Schrödinger equation with higher-order effects,which describes the ultrashort pulses in the birefringent fiber.Based on the Lax pair,the eigenfunction and generalized Darboux transformation are derived.Next,we construct several novel higher-order localized waves and classified them into three categories:(i)higher-order rogue waves interacting with bright/antidark breathers,(ii)higher-order breather fission/fusion,(iii)higherorder breather interacting with soliton.Moreover,we explore the effects of parameters on the structure,collision process and energy distribution of localized waves and these characteristics are significantly different from previous ones.Finally,the dynamical properties of these solutions are discussed in detail.
基金supported by the National Key Research and Development Program of China under Grant Nos.2021YFC2203004,2021YFA0718304,2020YFC2201501RGC is supported by the National Natural Science Foundation of China under Grants Nos.11947302,11991052,11690022,11821505 and 11851302+8 种基金the Strategic Priority Research Program of the Chinese Academy of Sciences(CAS)under Grant Nos.XDB23030100 and XDA15020701the Key Research Program of the CAS under Grant No.XDPB15the Key Research Program of Frontier Sciences of CAS.SJW is supported by the National Key Research and Development Program of China under Grant Nos.2021YFC2203004 and 2021YFA0718304the National Natural Science Foundation of China under Grant Nos.12422502 and 12105344the China Manned Space Project under Grant No.CMS-CSST-2021-B01JHY is supported by the National Science Foundation of China under Grant Nos.12022514,11875003 and 12047503the National Key Research and Development Program of China under Grant Nos.2020YFC2201501 and 2021YFA0718304the CAS Project for Young Scientists in Basic Research under Grant No.YSBR-006the Key Research Program of the CAS under Grant No.XDPB15.
文摘The future space-borne gravitational wave(GW)detectors would provide a promising probe for the new physics beyond the standard model that admits the first-order phase transitions.The predictions for the GW background vary sensitively among different concrete particle physics models but also share a large degeneracy in the model buildings,which motivates an effective model description on the phase transition based on different patterns of the electroweak symmetry breaking(EWSB).In this paper,using the scalar N-plet model as a demonstration,we propose an effective classification for three different patterns of EWSB:(1)radiative symmetry breaking with classical scale invariance,(2)the Higgs mechanism in a generic scalar extension,and(3)higher-dimensional operators.We conclude that a strong first-order phase transition could be realized for(1)and(2)with a small quartic coupling and a small isospin of an additional N-plet field for the light scalar field model with and without the classical scale invariance,and(3)with a large mixing coupling between scalar fields and a large isospin of the N-plet field for the heavy scalar field model.
基金the National Natural Science Foundation of China(62174170)the Natural Science Foundation of Guangdong Province(2024A1515010123)+4 种基金the Shenzhen Science and Technology Program(20220807020526001)the Strategic Priority Research Program of the Chinese Academy of Sciences(XDB0670000)the Shenzhen Science and Technology Program(KJZD20230923114708018,KJZD20230923114710022)the Talent Support Project of Guangdong(2021TX06C101)the Shenzhen Basic Research(JCYJ20210324115406019).
文摘Laser debonding technology has been widely used in advanced chip packaging,such as fan-out integration,2.5D/3D ICs,and MEMS devices.Typically,laser debonding of bonded pairs(R/R separation)is typically achieved by completely removing the material from the ablation region within the release material layer at high energy densities.However,this R/R separation method often results in a significant amount of release material and carbonized debris remaining on the surface of the device wafer,severely reducing product yields and cleaning efficiency for ultra-thin device wafers.Here,we proposed an interfacial separation strategy based on laser-induced hot stamping effect and thermoelastic stress wave,which enables stress-free separation of wafer bonding pairs at the interface of the release layer and the adhesive layer(R/A separation).By comprehensively analyzing the micro-morphology and material composition of the release material,we elucidated the laser debonding behavior of bonded pairs under different separation modes.Additionally,we calculated the ablation threshold of the release material in the case of wafer bonding and established the processing window for different separation methods.This work offers a fresh perspective on the development and application of laser debonding technology.The proposed R/A interface separation method is versatile,controllable,and highly reliable,and does not leave release materials and carbonized debris on device wafers,demonstrating strong industrial adaptability,which greatly facilitates the application and development of advanced packaging for ultra-thin chips.
