Under the strategic framework of rural revitalization and agricultural modernization, Xinjiashan Specialty Coffee Base, located in Zaotang Village, Lujiang Town, Longyang District, Baoshan City, has been proactively i...Under the strategic framework of rural revitalization and agricultural modernization, Xinjiashan Specialty Coffee Base, located in Zaotang Village, Lujiang Town, Longyang District, Baoshan City, has been proactively investigating innovative models for agricultural development. Through extensive communication and collaboration, this base has established close partnerships with research institutions including Kunming University of Science and Technology, Baoshan University, and Yunnan Academy of Agricultural Sciences, with a commitment to thoroughly exploring the potential for resource recycling and ecological complementarity. An innovative four-in-one three-dimensional integrated planting system incorporating "coffee, bananas, green manure, and bees" has been implemented. Concurrently, technological and digital management strategies have been comprehensively integrated to improve planting efficiency. Under this model, the proportion of specialty coffee attains 71%, and the per-unit yield is 17% greater than that of the conventional planting model. This approach not only substantially enhances economic returns but also promotes the integrated development of ecological and social benefits, offering a valuable practical example and experiential reference for the specialty and sustainable advancement of the coffee industry in comparable regions.展开更多
Autonomous vehicles operate without direct human intervention,which introduces safety risks that differ from those of conventional vehicles.Although many studies have examined safety issues related to autonomous drivi...Autonomous vehicles operate without direct human intervention,which introduces safety risks that differ from those of conventional vehicles.Although many studies have examined safety issues related to autonomous driving,high-risk situations have often been defined using single indicators,making it difficult to capture the complex and evolving nature of accident risk.To address this limitation,this study proposes a structured framework for defining and analyzing high-risk situations throughout the traffic accident process.High-risk situations are described using three complementary indicators:accident likelihood,accident severity,and accident duration.These indicators explain how risk emerges,increases,and persists over time.Based on this concept,a framework for traffic accident visualization analysis is developed to support phase-specific risk assessment and visualization.The framework combines accident-phase information with factor-level risk contributions,allowing systematic identification of key factors and their interactions across different accident stages.Using combinations of the three indicators,high-risk situations are classified into twenty-seven distinct types,providing a clear typology for complex accident scenarios involving autonomous vehicles.The applicability of the proposed framework is demonstrated through two representative accident scenarioswith different risk characteristics.The results showthat the framework effectively captures interactions among multiple risk factors,explains how risk levels change from pre-crash to post-crash phases,and identifies contributing factors that are difficult to detect using conventional traffic accident investigation methods.Overall,the proposed framework offers a practical basis for autonomous vehicle accident analysis,safety evaluation,and policy-related decision-making.展开更多
Aerial surveys are dynamic and continuous processes,and there are different height distributions of the ground in the measurement area,which leads to problems such as overlapping measurement areas and inaccurate altit...Aerial surveys are dynamic and continuous processes,and there are different height distributions of the ground in the measurement area,which leads to problems such as overlapping measurement areas and inaccurate altitude correction during the survey process.Commonly used terrain correction methods are based on the concept of finite elementization of ground surface radioactive sources,using GPS coordinates,radar altitude,and ground elevation distribution information from aerial surveys,combined with the sourceless efficiency calibration method to construct a response matrix,which is then inverted for surface nuclide content.However,most of the sourceless efficiency calibration methods used are numerical calculations that consider the body detector as a point detector and do not consider the changes in intrinsic detection efficiency under different incident directions of gamma rays.Therefore,when the altitude of the measurement area varies significantly or the flight altitude of the aerial survey is relatively low,such sourceless efficiency calibration method calculations tend to have a large bias,which affects the accuracy of the terrain correction.To address the above problems,this study employs a novel sourceless efficiency calibration method based on the Boolean operation of the ray deposition process and simplifies the traditional body source measurement model to a surface source measurement model to achieve fast and accurate efficiency calibration.Then,through the discretization of the measurement process,the static measurement process is superposed as equivalent to the dynamic measurement process,and the dynamic measurement response matrix is built and optimized based on the calibration method.Finally,the PSO-MLEM algorithm was used to solve the dynamic measurement response matrix to achieve dynamic terrain correction of aerial survey data.Analysis of the Baiyun'ebo test area revealed that,after applying dynamic terrain correction,the inverted anomalies in uranium(eU),thorium(eTh),and potassium(K)concentrations were closer to ground measurements(within 5.72%-30.79%)and exhibited clearer anomaly boundaries compared to traditional height-based corrections.However,owing to the inherent statistical fluctuations and characteristics of matrix inversion,higher measurement values tend to absorb lower ones,potentially enlarging the anomalous regions.Nevertheless,the highanomaly regions after inversion largely coincided with the ground truth validation,demonstrating that the proposed method can effectively correct airborne gamma spectrometry data.展开更多
According to the Mindlin plate theory and the first-order piston theory,this work obtains accurate closed-form eigensolutions for the flutter problem of three-dimensional(3D)rectangular laminated panels.The governing ...According to the Mindlin plate theory and the first-order piston theory,this work obtains accurate closed-form eigensolutions for the flutter problem of three-dimensional(3D)rectangular laminated panels.The governing differential equations are derived by the Hamilton's variational principle,and then solved by the iterative Separation-of-Variable(i SOV)method,which are applicable to arbitrary combinations of homogeneous Boundary Conditions(BCs).However,only the simply-support,clamped and cantilever panels are considered in this work for the sake of clarity.With the closed-form eigensolutions,the flutter frequency,flutter mode and flutter boundary are presented,and the effect of shear deformation and aerodynamic damping on flutter frequencies is investigated.Besides,the relation between panel energy and the work of aerodynamic load is discussed.The numerical comparisons reveal the following.(A)The flutter eigenvalues obtained by the present method are accurate,validated by the Finite Element Method(FEM)and the Galerkin method.(B)When the span-chord ratio is larger than 3,simplifying a 3D panel to 2D(two-dimensional)panel is reasonable and the relative differences of the flutter points predicted by the two models are less than one percent.(C)The reciprocal relationship between the mechanical energy of the panel and the work done by aerodynamic load is verified by using the present flutter eigenvalues and modes,further indicating the high accuracy of the present solutions.(D)The coupling of shear deformation and aerodynamic damping prevents frequency coalescing.展开更多
To address the problem of multi-missile cooperative interception against maneuvering targets at a prespecified impact time and desired Line-of-Sight(LOS)angles in ThreeDimensional(3D)space,this paper proposes a 3D lea...To address the problem of multi-missile cooperative interception against maneuvering targets at a prespecified impact time and desired Line-of-Sight(LOS)angles in ThreeDimensional(3D)space,this paper proposes a 3D leader-following cooperative interception guidance law.First,in the LOS direction of the leader,an impact time-controlled guidance law is derived based on the fixed-time stability theory,which enables the leader to complete the interception task at a prespecified impact time.Next,in the LOS direction of the followers,by introducing a time consensus tracking error function,a fixed-time consensus tracking guidance law is investigated to guarantee the consensus tracking convergence of the time-to-go.Then,in the direction normal to the LOS,by combining the designed global integral sliding mode surface and the second-order Sliding Mode Control(SMC)theory,an innovative 3D LOS-angle-constrained interception guidance law is developed,which eliminates the reaching phase in the traditional sliding mode guidance laws and effectively saves energy consumption.Moreover,it effectively suppresses the chattering phenomenon while avoiding the singularity issue,and compensates for unknown interference caused by target maneuvering online,making it convenient for practical engineering applications.Finally,theoretical proof analysis and multiple sets of numerical simulation results verify the effectiveness,superiority,and robustness of the investigated guidance law.展开更多
Wireless networks support numerous terminals,manage large data volumes,and provide diverse services,but the vulnerability to environmental changes leads to increased complexity and costs.Situational awareness has been...Wireless networks support numerous terminals,manage large data volumes,and provide diverse services,but the vulnerability to environmental changes leads to increased complexity and costs.Situational awareness has been widely applied in network management,but existing methods fail to find optimal solutions due to the high heterogeneity of base stations,numerous metrics,and complex intercell dependencies.To address this gap,this paper proposes a specialized framework for wireless networks,integrating an evaluation model and control approach.The framework expands the indicator set into four key areas,introduces an evaluation method,and proposes the indicator perturbation greedy(IPG)algorithm and the adjustment scheme selection method based on damping coefficient(DCSS)for effective network optimization.A case study in an urban area demonstrates the framework’s ability to balance and improve network performance,enhancing situational awareness and operational efficiency under dynamic conditions.展开更多
Three-dimensional(3D)urban structures play a critical role in informing climate mitigation strategies aimed at the built environment and facilitating sustainable urban development.Regrettably,there exists a significan...Three-dimensional(3D)urban structures play a critical role in informing climate mitigation strategies aimed at the built environment and facilitating sustainable urban development.Regrettably,there exists a significant gap in detailed and consistent data on 3D building space structures with global coverage due to the challenges inherent in the data collection and model calibration processes.In this study,we constructed a global urban structure(GUS-3D)dataset,including building volume,height,and footprint information,at a 500 m spatial resolution using extensive satellite observation products and numerous reference building samples.Our analysis indicated that the total volume of buildings worldwide in2015 exceeded 1×10^(12)m^(3).Over the 1985 to 2015 period,we observed a slight increase in the magnitude of 3D building volume growth(i.e.,it increased from 166.02 km3 during the 1985–2000 period to 175.08km3 during the 2000–2015 period),while the expansion magnitudes of the two-dimensional(2D)building footprint(22.51×10^(3) vs 13.29×10^(3)km^(2))and urban extent(157×10^(3) vs 133.8×10^(3)km^(2))notably decreased.This trend highlights the significant increase in intensive vertical utilization of urban land.Furthermore,we identified significant heterogeneity in building space provision and inequality across cities worldwide.This inequality is particularly pronounced in many populous Asian cities,which has been overlooked in previous studies on economic inequality.The GUS-3D dataset shows great potential to deepen our understanding of the urban environment and creates new horizons for numerous 3D urban studies.展开更多
BACKGROUND Inguinal hernias are common after surgery.Tension-free repair is widely accepted as the main method for managing inguinal hernias.Adequate exposure,coverage,and repair of the myopectineal orifice(MPO)are ne...BACKGROUND Inguinal hernias are common after surgery.Tension-free repair is widely accepted as the main method for managing inguinal hernias.Adequate exposure,coverage,and repair of the myopectineal orifice(MPO)are necessary.However,due to differences in race and sex,people’s body shapes vary.According to European guidelines,the patch should measure 10 cm×15 cm.If any part of the MPO is dissected,injury to the nerves,vascular network,or organs may occur during surgery,thereby leading to inguinal discomfort,pain,and seroma formation after surgery.Therefore,accurate localization and measurement of the boundary of the MPO are crucial for selecting the optimal patch for inguinal hernia repair.AIM To compare the size of the MPO measured on three-dimensional multislice spiral computed tomography(CT)with that measured via laparoscopy and explore the relevant factors influencing the size of the MPO.METHODS Clinical data from 74 patients who underwent laparoscopic tension-free inguinal hernia repair at the General Surgery Department of the First Affiliated Hospital of Anhui University of Science and Technology between September 2022 and July 2024 were collected and analyzed retrospectively.Transabdominal preperitoneal was performed.Sixty-four males and 10 females,with an average age of 58.30±12.32 years,were included.The clinical data of the patients were collected.The boundary of the MPO was measured on three-dimensional CT images before surgery and then again during transabdominal preperitoneal.All the preoperative and intraoperative data were analyzed via paired t-tests.A t-test was used for comparisons of age,body mass index,and sex between the groups.In the comparative analysis,a P value less than 0.05 indicated a significant difference.RESULTS The boundaries of the MPO on 3-dimensional CT images measured 7.05±0.47 cm and 6.27±0.61 cm,and the area of the MPO was 19.54±3.33 cm^(2).The boundaries of the MPO during surgery were 7.18±0.51 cm and 6.17±0.40 cm.The errors were not statistically significant.However,the intraoperative BD(the width of the MPO,P=0.024,P<0.05)and preoperative AC(the length of the MPO,P=0.045,P<0.05)significantly differed according to sex.The AC and BD measurements before and during surgery were not significantly different according to age,body mass index,hernia side or hernia type(P>0.05).CONCLUSION The application of this technology can aid in determining the most appropriate dissection range and patch size.展开更多
The development of efficient catalysts for hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)is of great significance for the practical application of water splitting in alkaline electrolytes.Transitio...The development of efficient catalysts for hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)is of great significance for the practical application of water splitting in alkaline electrolytes.Transition metal sulfide electrocatalysts have been widely recognized as efficient catalysts for water splitting in alkaline media.In this work,an original and efficient synthesis strategy is proposed for the fabrication of asymmetric anode(N-(Co-Cu)S_(x))and cathode(N-CoS/Cu_(2)S).Impressively,these electrodes exhibit superior performance,benefiting from the construction of three-dimensional(3D)structures and the electronic structure adjustment caused by N-doping with increased active sites,improved mass/charge transport and enhanced evolution and release of gas bubbles.Hence,N-(Co-Cu)S_(x)anode exhibits excellent OER performance with only 217 mV overpotential at 10 mA·cm^(-2),while N-CoS/Cu_(2)S cathode possesses excellent HER performance with only 67 mV overpotential at 10 mA·cm^(-2).N-(Co-Cu)S_(x)||N-CoS/Cu_(2)S electrolyzer presents a low cell voltage of 1.53 V at 10 mA·cm^(-2)toward overall water splitting,which is superior to most recently reported transition metal sulfide-based catalysts.展开更多
It is of great importance to obtain precise trace data,as traces are frequently the sole visible and measurable parameter in most outcrops.The manual recognition and detection of traces on high-resolution three-dimens...It is of great importance to obtain precise trace data,as traces are frequently the sole visible and measurable parameter in most outcrops.The manual recognition and detection of traces on high-resolution three-dimensional(3D)models are relatively straightforward but time-consuming.One potential solution to enhance this process is to use machine learning algorithms to detect the 3D traces.In this study,a unique pixel-wise texture mapper algorithm generates a dense point cloud representation of an outcrop with the precise resolution of the original textured 3D model.A virtual digital image rendering was then employed to capture virtual images of selected regions.This technique helps to overcome limitations caused by the surface morphology of the rock mass,such as restricted access,lighting conditions,and shading effects.After AI-powered trace detection on two-dimensional(2D)images,a 3D data structuring technique was applied to the selected trace pixels.In the 3D data structuring,the trace data were structured through 2D thinning,3D reprojection,clustering,segmentation,and segment linking.Finally,the linked segments were exported as 3D polylines,with each polyline in the output corresponding to a trace.The efficacy of the proposed method was assessed using a 3D model of a real-world case study,which was used to compare the results of artificial intelligence(AI)-aided and human intelligence trace detection.Rosette diagrams,which visualize the distribution of trace orientations,confirmed the high similarity between the automatically and manually generated trace maps.In conclusion,the proposed semi-automatic method was easy to use,fast,and accurate in detecting the dominant jointing system of the rock mass.展开更多
Currently,there are a limited number of dynamic models available for braided composite plates with large overall motions,despite the incorporation of three-dimensional(3D)braided composites into rotating blade compone...Currently,there are a limited number of dynamic models available for braided composite plates with large overall motions,despite the incorporation of three-dimensional(3D)braided composites into rotating blade components.In this paper,a dynamic model of 3D 4-directional braided composite thin plates considering braiding directions is established.Based on Kirchhoff's plate assumptions,the displacement variables of the plate are expressed.By incorporating the braiding directions into the constitutive equation of the braided composites,the dynamic model of the plate considering braiding directions is obtained.The effects of the speeds,braiding directions,and braided angles on the responses of the plate with fixed-axis rotation and translational motion,respectively,are investigated.This paper presents a dynamic theory for calculating the deformation of 3D braided composite structures undergoing both translational and rotational motions.It also provides a simulation method for investigating the dynamic behavior of non-isotropic material plates in various applications.展开更多
This paper proposes an attitude control strategy for a flexible satellite equipped with an orthogonal cluster of three-dimensional(3D)magnetically suspended wheels(MSWs).The mathematical model for the satellite incorp...This paper proposes an attitude control strategy for a flexible satellite equipped with an orthogonal cluster of three-dimensional(3D)magnetically suspended wheels(MSWs).The mathematical model for the satellite incorporating flexible appendages and an orthogonal cluster of magnetically suspended reaction wheel actuators is initially developed.After that,an adaptive attitude controller is designed with a switching surface of variable structure,an adaptive law for estimating inertia matrix uncertainty,and a fuzzy disturbance observer for estimating disturbance torques.Additionally,a Moore-Penrose-based steering law is proposed to derive the tilt angle commands of the orthogonal configuration of the 3D MSW to follow the designed control signal.Finally,numerical simulations are presented to validate the effectiveness of the proposed control strategy.展开更多
Liposarcoma is one of the most common soft tissue sarcomas,however,its occurrence rate is still rare compared to other cancers.Due to its rarity,in vitro experiments are an essential approach to elucidate liposarcoma ...Liposarcoma is one of the most common soft tissue sarcomas,however,its occurrence rate is still rare compared to other cancers.Due to its rarity,in vitro experiments are an essential approach to elucidate liposarcoma pathobiology.Conventional cell culture-based research(2D cell culture)is still playing a pivotal role,while several shortcomings have been recently under discussion.In vivo,mouse models are usually adopted for pre-clinical analyses with expectations to overcome the issues of 2D cell culture.However,they do not fully recapitulate human dedifferentiated liposarcoma(DDLPS)characteristics.Therefore,three-dimensional(3D)culture systems have been the recent research focus in the cell biology field with the expectation to overcome at the same time the disadvantages of 2D cell culture and in vivo animal models and fill in the gap between them.Given the liposarcoma rarity,we believe that 3D cell culture techniques,including 3D cell cultures/co-cultures,and Patient-Derived tumor Organoids(PDOs),represent a promising approach to facilitate liposarcoma investigation and elucidate its molecular mechanisms and effective therapy development.In this review,we first provide a general overview of 3D cell cultures compared to 2D cell cultures.We then focus on one of the recent 3D cell culture applications,Patient-Derived Organoids(PDOs),summarizing and discussing several PDO methodologies.Finally,we discuss the current and future applications of PDOs to sarcoma,particularly in the field of liposarcoma.展开更多
萨特作为剧作家,推崇新的剧种théatre de situations,situation自然是萨特戏剧理论的核心概念之一,同时也是萨特的重要哲学术语之一。然而在汉语中,不管是译自法语还是英语,不管是在译作还是学术作品中,théatre de situation...萨特作为剧作家,推崇新的剧种théatre de situations,situation自然是萨特戏剧理论的核心概念之一,同时也是萨特的重要哲学术语之一。然而在汉语中,不管是译自法语还是英语,不管是在译作还是学术作品中,théatre de situations有“情境剧”“境遇剧”“处境剧”“境况剧”等多种译名。在不同作/译者间甚至在同一作/译者的不同作品中,situation的中译名都存在明显分歧,相关的讨论却寥寥无几。那么究竟如何翻译该词才算贴切呢?针对此问题,本文追本究源,将萨特戏剧理论与哲学理论结合起来讨论。通过考查各种论文、著作及译作,查阅中法文辞书或文献中相关词汇的用法,并结合萨特原著中该词的内涵,本文作者初步得出结论:situation译为“处境”更为合适。展开更多
BACKGROUND Systematic review focuses on the visual patient avatar(VPA)technology,a tool designed to enhance situational awareness in anesthesia by transforming traditional numerical data into intuitive visual displays...BACKGROUND Systematic review focuses on the visual patient avatar(VPA)technology,a tool designed to enhance situational awareness in anesthesia by transforming traditional numerical data into intuitive visual displays.AIM To explore how VPA can improve perceptual performance,reduce cognitive load,and increase user acceptance,potentially leading to better patient outcomes.METHODS The review is based on 14 studies conducted between 2018 and 2023 in five different hospitals across Europe.RESULTS These studies demonstrate that VPA allows clinicians to perceive and recall vital signs more efficiently than conventional monitoring methods.The technology’s intuitive design helps reduce cognitive workload,indicating less mental effort required for patient monitoring.Users’feedback on VPA was generally positive,highlighting its potential to enhance monitoring and decision-making in highstress environments.However,some users noted the need for further development,particularly in visualization design and data integration.CONCLUSION Review concludes that VPA technology represents a significant advancement in patient monitoring,promoting better situational awareness and potentially improving safety in perioperative care.展开更多
The international situation remained tense and turbulent in 2024,with the constantly unfolding spillover of crises,escalating conflicts and widening rifts,especially with the hard-to-ease Ukraine crisis and the humani...The international situation remained tense and turbulent in 2024,with the constantly unfolding spillover of crises,escalating conflicts and widening rifts,especially with the hard-to-ease Ukraine crisis and the humanitarian crisis worsened by the turmoil in the Middle East.展开更多
The development of minimally invasive surgery has transformed the management of gastrointestinal cancer.Notably,three-dimensional visualization systems have increased surgical precision.This editorial discusses a rece...The development of minimally invasive surgery has transformed the management of gastrointestinal cancer.Notably,three-dimensional visualization systems have increased surgical precision.This editorial discusses a recent study by Shen and Zhang,which compared the clinical applications of naked-eye threedimensional laparoscopic systems vs traditional optical systems in radical surgery for gastric and colorectal cancer.Both systems appeared to yield comparable surgical and oncological outcomes in terms of safety parameters,operating times,and quality of lymph node dissection.However,the spectacle-free system’s technical and logistical limitations hindered its effects on the surgical team’s overall competency.This editorial examines the authors’findings within the broader context of the evolution of oncologic laparoscopy,discusses the relevance of the results in light of the current literature,and proposes future research directions focused on multicenter validation,comprehensive ergonomic analysis,and technological advancements aimed at enhancing intraoperative collaboration.As technology continues to evolve,clinical implementation of new methods must be supported by robust scientific evidence and standardized criteria,to ensure tangible improvements in efficiency,safety,and oncologic outcomes.展开更多
Battlefield situation awareness is equivalent to the observation and orientation part of the Observation-Orientation-Decision-Action(OODA)loop.It is the key to transforming information advantage into decision-making a...Battlefield situation awareness is equivalent to the observation and orientation part of the Observation-Orientation-Decision-Action(OODA)loop.It is the key to transforming information advantage into decision-making advantages and an essential support for agile command decision-making.With the rapid rise and widespread application of various advanced intelligent technologies and model algorithms in the military field,traditional situation awareness technology and capacity building are facing great challenges.Relying solely on manual processing of battlefield situational data is no longer sufficient to meet the changing needs of the battlefield,nor can it provide commanders with real-time,accurate,efficient,and reliable situational information.Therefore,it is necessary to use highperformance hardware facilities and artificial intelligence technology to process massive battlefield data and provide an important reference basis for commanders to implement decision-making behaviors.展开更多
As one of the world's three major food crops and an important economic and oil crop,soybean plays a crucial role in ensuring food safety.In recent years,there are many problems in soybean cultivation,production an...As one of the world's three major food crops and an important economic and oil crop,soybean plays a crucial role in ensuring food safety.In recent years,there are many problems in soybean cultivation,production and processing.In view of this situation,this paper comprehensively expounded and decomposed the cultivation situation,existing problems,specific countermeasures and conclusions,so as to re-recognize them.This study provides reference materials for the sustainable and healthy development of the soybean industry.展开更多
The three-dimensional particle electrode system exhibits significant potential for application in the treatment of wastewater.Nonetheless,the advancement of effective granular electrodes characterized by elevated cata...The three-dimensional particle electrode system exhibits significant potential for application in the treatment of wastewater.Nonetheless,the advancement of effective granular electrodes characterized by elevated catalytic activity and minimal energy consumption continues to pose a significant challenge.In this research,Fluorine-doped copper-carbon(F/Cu-GAC)particle electrodes were effectively synthesized through an impregnationcalcination technique,utilizing granular activated carbon as the carrier and fluorinedoped modified copper oxides as the catalytic agents.The particle electrodes were subsequently utilized to promote the degradation of 2,4,6-trichlorophenol(2,4,6-TCP)in a threedimensional electrocatalytic reactor(3DER).The F/Cu-GAC particle electrodes were polarized under the action of electric field,which promoted the heterogeneous Fenton-like reaction in which H2O2 generated by two-electron oxygen reduction reaction(2e-ORR)of O_(2) was catalytically decomposed to·OH.The 3DER equipped with F/Cu-GAC particle electrodes showed 100%removal of 2,4,6-TCP and 79.24%removal of TOC with a specific energy consumption(EC)of approximately 0.019 kWh/g·COD after 2 h of operation.The F/Cu-GAC particle electrodes exhibited an overpotential of 0.38 V and an electrochemically active surface area(ECSA)of 715 cm^(2),as determined through linear sweep voltammetry(LSV)and cyclic voltammetry(CV)assessments.These findings suggest a high level of electrocatalytic performance.Furthermore,the catalytic mechanism of the 3DER equipped with F/Cu-GAC particle electrodes was elucidated through the application of X-ray photoelectron spectroscopy(XPS),electron spin resonance(ESR),and active species capture experiments.This investigation offers a novel approach for the effective degradation of 2,4,6-TCP.展开更多
文摘Under the strategic framework of rural revitalization and agricultural modernization, Xinjiashan Specialty Coffee Base, located in Zaotang Village, Lujiang Town, Longyang District, Baoshan City, has been proactively investigating innovative models for agricultural development. Through extensive communication and collaboration, this base has established close partnerships with research institutions including Kunming University of Science and Technology, Baoshan University, and Yunnan Academy of Agricultural Sciences, with a commitment to thoroughly exploring the potential for resource recycling and ecological complementarity. An innovative four-in-one three-dimensional integrated planting system incorporating "coffee, bananas, green manure, and bees" has been implemented. Concurrently, technological and digital management strategies have been comprehensively integrated to improve planting efficiency. Under this model, the proportion of specialty coffee attains 71%, and the per-unit yield is 17% greater than that of the conventional planting model. This approach not only substantially enhances economic returns but also promotes the integrated development of ecological and social benefits, offering a valuable practical example and experiential reference for the specialty and sustainable advancement of the coffee industry in comparable regions.
基金supported by the Korea Institute of Police Technology(No.:RS-2024-00405603).
文摘Autonomous vehicles operate without direct human intervention,which introduces safety risks that differ from those of conventional vehicles.Although many studies have examined safety issues related to autonomous driving,high-risk situations have often been defined using single indicators,making it difficult to capture the complex and evolving nature of accident risk.To address this limitation,this study proposes a structured framework for defining and analyzing high-risk situations throughout the traffic accident process.High-risk situations are described using three complementary indicators:accident likelihood,accident severity,and accident duration.These indicators explain how risk emerges,increases,and persists over time.Based on this concept,a framework for traffic accident visualization analysis is developed to support phase-specific risk assessment and visualization.The framework combines accident-phase information with factor-level risk contributions,allowing systematic identification of key factors and their interactions across different accident stages.Using combinations of the three indicators,high-risk situations are classified into twenty-seven distinct types,providing a clear typology for complex accident scenarios involving autonomous vehicles.The applicability of the proposed framework is demonstrated through two representative accident scenarioswith different risk characteristics.The results showthat the framework effectively captures interactions among multiple risk factors,explains how risk levels change from pre-crash to post-crash phases,and identifies contributing factors that are difficult to detect using conventional traffic accident investigation methods.Overall,the proposed framework offers a practical basis for autonomous vehicle accident analysis,safety evaluation,and policy-related decision-making.
基金supported by the National Key Research and Development Program(No.2022YFC2807400)the National Natural Science Foundation of China(Nos.12265003 and 12205044)。
文摘Aerial surveys are dynamic and continuous processes,and there are different height distributions of the ground in the measurement area,which leads to problems such as overlapping measurement areas and inaccurate altitude correction during the survey process.Commonly used terrain correction methods are based on the concept of finite elementization of ground surface radioactive sources,using GPS coordinates,radar altitude,and ground elevation distribution information from aerial surveys,combined with the sourceless efficiency calibration method to construct a response matrix,which is then inverted for surface nuclide content.However,most of the sourceless efficiency calibration methods used are numerical calculations that consider the body detector as a point detector and do not consider the changes in intrinsic detection efficiency under different incident directions of gamma rays.Therefore,when the altitude of the measurement area varies significantly or the flight altitude of the aerial survey is relatively low,such sourceless efficiency calibration method calculations tend to have a large bias,which affects the accuracy of the terrain correction.To address the above problems,this study employs a novel sourceless efficiency calibration method based on the Boolean operation of the ray deposition process and simplifies the traditional body source measurement model to a surface source measurement model to achieve fast and accurate efficiency calibration.Then,through the discretization of the measurement process,the static measurement process is superposed as equivalent to the dynamic measurement process,and the dynamic measurement response matrix is built and optimized based on the calibration method.Finally,the PSO-MLEM algorithm was used to solve the dynamic measurement response matrix to achieve dynamic terrain correction of aerial survey data.Analysis of the Baiyun'ebo test area revealed that,after applying dynamic terrain correction,the inverted anomalies in uranium(eU),thorium(eTh),and potassium(K)concentrations were closer to ground measurements(within 5.72%-30.79%)and exhibited clearer anomaly boundaries compared to traditional height-based corrections.However,owing to the inherent statistical fluctuations and characteristics of matrix inversion,higher measurement values tend to absorb lower ones,potentially enlarging the anomalous regions.Nevertheless,the highanomaly regions after inversion largely coincided with the ground truth validation,demonstrating that the proposed method can effectively correct airborne gamma spectrometry data.
基金support of the National Natural Science Foundation of China(No.12172023)。
文摘According to the Mindlin plate theory and the first-order piston theory,this work obtains accurate closed-form eigensolutions for the flutter problem of three-dimensional(3D)rectangular laminated panels.The governing differential equations are derived by the Hamilton's variational principle,and then solved by the iterative Separation-of-Variable(i SOV)method,which are applicable to arbitrary combinations of homogeneous Boundary Conditions(BCs).However,only the simply-support,clamped and cantilever panels are considered in this work for the sake of clarity.With the closed-form eigensolutions,the flutter frequency,flutter mode and flutter boundary are presented,and the effect of shear deformation and aerodynamic damping on flutter frequencies is investigated.Besides,the relation between panel energy and the work of aerodynamic load is discussed.The numerical comparisons reveal the following.(A)The flutter eigenvalues obtained by the present method are accurate,validated by the Finite Element Method(FEM)and the Galerkin method.(B)When the span-chord ratio is larger than 3,simplifying a 3D panel to 2D(two-dimensional)panel is reasonable and the relative differences of the flutter points predicted by the two models are less than one percent.(C)The reciprocal relationship between the mechanical energy of the panel and the work done by aerodynamic load is verified by using the present flutter eigenvalues and modes,further indicating the high accuracy of the present solutions.(D)The coupling of shear deformation and aerodynamic damping prevents frequency coalescing.
文摘To address the problem of multi-missile cooperative interception against maneuvering targets at a prespecified impact time and desired Line-of-Sight(LOS)angles in ThreeDimensional(3D)space,this paper proposes a 3D leader-following cooperative interception guidance law.First,in the LOS direction of the leader,an impact time-controlled guidance law is derived based on the fixed-time stability theory,which enables the leader to complete the interception task at a prespecified impact time.Next,in the LOS direction of the followers,by introducing a time consensus tracking error function,a fixed-time consensus tracking guidance law is investigated to guarantee the consensus tracking convergence of the time-to-go.Then,in the direction normal to the LOS,by combining the designed global integral sliding mode surface and the second-order Sliding Mode Control(SMC)theory,an innovative 3D LOS-angle-constrained interception guidance law is developed,which eliminates the reaching phase in the traditional sliding mode guidance laws and effectively saves energy consumption.Moreover,it effectively suppresses the chattering phenomenon while avoiding the singularity issue,and compensates for unknown interference caused by target maneuvering online,making it convenient for practical engineering applications.Finally,theoretical proof analysis and multiple sets of numerical simulation results verify the effectiveness,superiority,and robustness of the investigated guidance law.
文摘Wireless networks support numerous terminals,manage large data volumes,and provide diverse services,but the vulnerability to environmental changes leads to increased complexity and costs.Situational awareness has been widely applied in network management,but existing methods fail to find optimal solutions due to the high heterogeneity of base stations,numerous metrics,and complex intercell dependencies.To address this gap,this paper proposes a specialized framework for wireless networks,integrating an evaluation model and control approach.The framework expands the indicator set into four key areas,introduces an evaluation method,and proposes the indicator perturbation greedy(IPG)algorithm and the adjustment scheme selection method based on damping coefficient(DCSS)for effective network optimization.A case study in an urban area demonstrates the framework’s ability to balance and improve network performance,enhancing situational awareness and operational efficiency under dynamic conditions.
基金supported by the National Science Fund for Distinguished Young Scholars(42225107)the National Natural Science Foundation of China(42001326,42371414,42171409,and 42271419)+1 种基金the Natural Science Foundation of Guangdong Province of China(2022A1515012207)the Basic and Applied Basic Research Project of Guangzhou Science and Technology Planning(202201011539)。
文摘Three-dimensional(3D)urban structures play a critical role in informing climate mitigation strategies aimed at the built environment and facilitating sustainable urban development.Regrettably,there exists a significant gap in detailed and consistent data on 3D building space structures with global coverage due to the challenges inherent in the data collection and model calibration processes.In this study,we constructed a global urban structure(GUS-3D)dataset,including building volume,height,and footprint information,at a 500 m spatial resolution using extensive satellite observation products and numerous reference building samples.Our analysis indicated that the total volume of buildings worldwide in2015 exceeded 1×10^(12)m^(3).Over the 1985 to 2015 period,we observed a slight increase in the magnitude of 3D building volume growth(i.e.,it increased from 166.02 km3 during the 1985–2000 period to 175.08km3 during the 2000–2015 period),while the expansion magnitudes of the two-dimensional(2D)building footprint(22.51×10^(3) vs 13.29×10^(3)km^(2))and urban extent(157×10^(3) vs 133.8×10^(3)km^(2))notably decreased.This trend highlights the significant increase in intensive vertical utilization of urban land.Furthermore,we identified significant heterogeneity in building space provision and inequality across cities worldwide.This inequality is particularly pronounced in many populous Asian cities,which has been overlooked in previous studies on economic inequality.The GUS-3D dataset shows great potential to deepen our understanding of the urban environment and creates new horizons for numerous 3D urban studies.
基金Supported by the 2022 Provincial Quality Engineering Project for Higher Education Institutions,No.2022sx031the 2023 Provincial Quality Engineering Project for Higher Education Institutions,No.2023jyxm1071.
文摘BACKGROUND Inguinal hernias are common after surgery.Tension-free repair is widely accepted as the main method for managing inguinal hernias.Adequate exposure,coverage,and repair of the myopectineal orifice(MPO)are necessary.However,due to differences in race and sex,people’s body shapes vary.According to European guidelines,the patch should measure 10 cm×15 cm.If any part of the MPO is dissected,injury to the nerves,vascular network,or organs may occur during surgery,thereby leading to inguinal discomfort,pain,and seroma formation after surgery.Therefore,accurate localization and measurement of the boundary of the MPO are crucial for selecting the optimal patch for inguinal hernia repair.AIM To compare the size of the MPO measured on three-dimensional multislice spiral computed tomography(CT)with that measured via laparoscopy and explore the relevant factors influencing the size of the MPO.METHODS Clinical data from 74 patients who underwent laparoscopic tension-free inguinal hernia repair at the General Surgery Department of the First Affiliated Hospital of Anhui University of Science and Technology between September 2022 and July 2024 were collected and analyzed retrospectively.Transabdominal preperitoneal was performed.Sixty-four males and 10 females,with an average age of 58.30±12.32 years,were included.The clinical data of the patients were collected.The boundary of the MPO was measured on three-dimensional CT images before surgery and then again during transabdominal preperitoneal.All the preoperative and intraoperative data were analyzed via paired t-tests.A t-test was used for comparisons of age,body mass index,and sex between the groups.In the comparative analysis,a P value less than 0.05 indicated a significant difference.RESULTS The boundaries of the MPO on 3-dimensional CT images measured 7.05±0.47 cm and 6.27±0.61 cm,and the area of the MPO was 19.54±3.33 cm^(2).The boundaries of the MPO during surgery were 7.18±0.51 cm and 6.17±0.40 cm.The errors were not statistically significant.However,the intraoperative BD(the width of the MPO,P=0.024,P<0.05)and preoperative AC(the length of the MPO,P=0.045,P<0.05)significantly differed according to sex.The AC and BD measurements before and during surgery were not significantly different according to age,body mass index,hernia side or hernia type(P>0.05).CONCLUSION The application of this technology can aid in determining the most appropriate dissection range and patch size.
基金supported by the Science and Technology Project of Southwest Petroleum University(No.2021JBGS03)the Local Science and Technology Development Fund Projects Guided by the Central Government of China(No.2021ZYD0060)+2 种基金the National Natural Science Foundation of China(Nos.22209143 and 52371241)Guangdong High-level Innovation Institute Project(Nos.2021B0909050001 and 2021CX02L365)Guangdong Basic and Applied Basic Research Foundation(No.2023B1515120095).
文摘The development of efficient catalysts for hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)is of great significance for the practical application of water splitting in alkaline electrolytes.Transition metal sulfide electrocatalysts have been widely recognized as efficient catalysts for water splitting in alkaline media.In this work,an original and efficient synthesis strategy is proposed for the fabrication of asymmetric anode(N-(Co-Cu)S_(x))and cathode(N-CoS/Cu_(2)S).Impressively,these electrodes exhibit superior performance,benefiting from the construction of three-dimensional(3D)structures and the electronic structure adjustment caused by N-doping with increased active sites,improved mass/charge transport and enhanced evolution and release of gas bubbles.Hence,N-(Co-Cu)S_(x)anode exhibits excellent OER performance with only 217 mV overpotential at 10 mA·cm^(-2),while N-CoS/Cu_(2)S cathode possesses excellent HER performance with only 67 mV overpotential at 10 mA·cm^(-2).N-(Co-Cu)S_(x)||N-CoS/Cu_(2)S electrolyzer presents a low cell voltage of 1.53 V at 10 mA·cm^(-2)toward overall water splitting,which is superior to most recently reported transition metal sulfide-based catalysts.
基金supported by grants from the Human Resources Development program (Grant No.20204010600250)the Training Program of CCUS for the Green Growth (Grant No.20214000000500)by the Korea Institute of Energy Technology Evaluation and Planning (KETEP)funded by the Ministry of Trade,Industry,and Energy of the Korean Government (MOTIE).
文摘It is of great importance to obtain precise trace data,as traces are frequently the sole visible and measurable parameter in most outcrops.The manual recognition and detection of traces on high-resolution three-dimensional(3D)models are relatively straightforward but time-consuming.One potential solution to enhance this process is to use machine learning algorithms to detect the 3D traces.In this study,a unique pixel-wise texture mapper algorithm generates a dense point cloud representation of an outcrop with the precise resolution of the original textured 3D model.A virtual digital image rendering was then employed to capture virtual images of selected regions.This technique helps to overcome limitations caused by the surface morphology of the rock mass,such as restricted access,lighting conditions,and shading effects.After AI-powered trace detection on two-dimensional(2D)images,a 3D data structuring technique was applied to the selected trace pixels.In the 3D data structuring,the trace data were structured through 2D thinning,3D reprojection,clustering,segmentation,and segment linking.Finally,the linked segments were exported as 3D polylines,with each polyline in the output corresponding to a trace.The efficacy of the proposed method was assessed using a 3D model of a real-world case study,which was used to compare the results of artificial intelligence(AI)-aided and human intelligence trace detection.Rosette diagrams,which visualize the distribution of trace orientations,confirmed the high similarity between the automatically and manually generated trace maps.In conclusion,the proposed semi-automatic method was easy to use,fast,and accurate in detecting the dominant jointing system of the rock mass.
基金Project supported by the National Natural Science Foundation of China(Nos.12372071 and 12372070)the Aeronautical Science Fund of China(No.2022Z055052001)the Foundation of China Scholarship Council(No.202306830079)。
文摘Currently,there are a limited number of dynamic models available for braided composite plates with large overall motions,despite the incorporation of three-dimensional(3D)braided composites into rotating blade components.In this paper,a dynamic model of 3D 4-directional braided composite thin plates considering braiding directions is established.Based on Kirchhoff's plate assumptions,the displacement variables of the plate are expressed.By incorporating the braiding directions into the constitutive equation of the braided composites,the dynamic model of the plate considering braiding directions is obtained.The effects of the speeds,braiding directions,and braided angles on the responses of the plate with fixed-axis rotation and translational motion,respectively,are investigated.This paper presents a dynamic theory for calculating the deformation of 3D braided composite structures undergoing both translational and rotational motions.It also provides a simulation method for investigating the dynamic behavior of non-isotropic material plates in various applications.
基金Project supported by the National Natural Science Foundation of China(Nos.W2433004 and 12472015)the Research Fund of the State Key Laboratory of Mechanics and Control of Mechanical Structures(Nanjing University of Aeronautics and Astronautics)(No.MCMS-I-0122K01).
文摘This paper proposes an attitude control strategy for a flexible satellite equipped with an orthogonal cluster of three-dimensional(3D)magnetically suspended wheels(MSWs).The mathematical model for the satellite incorporating flexible appendages and an orthogonal cluster of magnetically suspended reaction wheel actuators is initially developed.After that,an adaptive attitude controller is designed with a switching surface of variable structure,an adaptive law for estimating inertia matrix uncertainty,and a fuzzy disturbance observer for estimating disturbance torques.Additionally,a Moore-Penrose-based steering law is proposed to derive the tilt angle commands of the orthogonal configuration of the 3D MSW to follow the designed control signal.Finally,numerical simulations are presented to validate the effectiveness of the proposed control strategy.
文摘Liposarcoma is one of the most common soft tissue sarcomas,however,its occurrence rate is still rare compared to other cancers.Due to its rarity,in vitro experiments are an essential approach to elucidate liposarcoma pathobiology.Conventional cell culture-based research(2D cell culture)is still playing a pivotal role,while several shortcomings have been recently under discussion.In vivo,mouse models are usually adopted for pre-clinical analyses with expectations to overcome the issues of 2D cell culture.However,they do not fully recapitulate human dedifferentiated liposarcoma(DDLPS)characteristics.Therefore,three-dimensional(3D)culture systems have been the recent research focus in the cell biology field with the expectation to overcome at the same time the disadvantages of 2D cell culture and in vivo animal models and fill in the gap between them.Given the liposarcoma rarity,we believe that 3D cell culture techniques,including 3D cell cultures/co-cultures,and Patient-Derived tumor Organoids(PDOs),represent a promising approach to facilitate liposarcoma investigation and elucidate its molecular mechanisms and effective therapy development.In this review,we first provide a general overview of 3D cell cultures compared to 2D cell cultures.We then focus on one of the recent 3D cell culture applications,Patient-Derived Organoids(PDOs),summarizing and discussing several PDO methodologies.Finally,we discuss the current and future applications of PDOs to sarcoma,particularly in the field of liposarcoma.
文摘萨特作为剧作家,推崇新的剧种théatre de situations,situation自然是萨特戏剧理论的核心概念之一,同时也是萨特的重要哲学术语之一。然而在汉语中,不管是译自法语还是英语,不管是在译作还是学术作品中,théatre de situations有“情境剧”“境遇剧”“处境剧”“境况剧”等多种译名。在不同作/译者间甚至在同一作/译者的不同作品中,situation的中译名都存在明显分歧,相关的讨论却寥寥无几。那么究竟如何翻译该词才算贴切呢?针对此问题,本文追本究源,将萨特戏剧理论与哲学理论结合起来讨论。通过考查各种论文、著作及译作,查阅中法文辞书或文献中相关词汇的用法,并结合萨特原著中该词的内涵,本文作者初步得出结论:situation译为“处境”更为合适。
文摘BACKGROUND Systematic review focuses on the visual patient avatar(VPA)technology,a tool designed to enhance situational awareness in anesthesia by transforming traditional numerical data into intuitive visual displays.AIM To explore how VPA can improve perceptual performance,reduce cognitive load,and increase user acceptance,potentially leading to better patient outcomes.METHODS The review is based on 14 studies conducted between 2018 and 2023 in five different hospitals across Europe.RESULTS These studies demonstrate that VPA allows clinicians to perceive and recall vital signs more efficiently than conventional monitoring methods.The technology’s intuitive design helps reduce cognitive workload,indicating less mental effort required for patient monitoring.Users’feedback on VPA was generally positive,highlighting its potential to enhance monitoring and decision-making in highstress environments.However,some users noted the need for further development,particularly in visualization design and data integration.CONCLUSION Review concludes that VPA technology represents a significant advancement in patient monitoring,promoting better situational awareness and potentially improving safety in perioperative care.
文摘The international situation remained tense and turbulent in 2024,with the constantly unfolding spillover of crises,escalating conflicts and widening rifts,especially with the hard-to-ease Ukraine crisis and the humanitarian crisis worsened by the turmoil in the Middle East.
文摘The development of minimally invasive surgery has transformed the management of gastrointestinal cancer.Notably,three-dimensional visualization systems have increased surgical precision.This editorial discusses a recent study by Shen and Zhang,which compared the clinical applications of naked-eye threedimensional laparoscopic systems vs traditional optical systems in radical surgery for gastric and colorectal cancer.Both systems appeared to yield comparable surgical and oncological outcomes in terms of safety parameters,operating times,and quality of lymph node dissection.However,the spectacle-free system’s technical and logistical limitations hindered its effects on the surgical team’s overall competency.This editorial examines the authors’findings within the broader context of the evolution of oncologic laparoscopy,discusses the relevance of the results in light of the current literature,and proposes future research directions focused on multicenter validation,comprehensive ergonomic analysis,and technological advancements aimed at enhancing intraoperative collaboration.As technology continues to evolve,clinical implementation of new methods must be supported by robust scientific evidence and standardized criteria,to ensure tangible improvements in efficiency,safety,and oncologic outcomes.
文摘Battlefield situation awareness is equivalent to the observation and orientation part of the Observation-Orientation-Decision-Action(OODA)loop.It is the key to transforming information advantage into decision-making advantages and an essential support for agile command decision-making.With the rapid rise and widespread application of various advanced intelligent technologies and model algorithms in the military field,traditional situation awareness technology and capacity building are facing great challenges.Relying solely on manual processing of battlefield situational data is no longer sufficient to meet the changing needs of the battlefield,nor can it provide commanders with real-time,accurate,efficient,and reliable situational information.Therefore,it is necessary to use highperformance hardware facilities and artificial intelligence technology to process massive battlefield data and provide an important reference basis for commanders to implement decision-making behaviors.
基金Supported by Special Fund for National Modern Agricultural Industry Technology System Construction(CARS-04-CES16).
文摘As one of the world's three major food crops and an important economic and oil crop,soybean plays a crucial role in ensuring food safety.In recent years,there are many problems in soybean cultivation,production and processing.In view of this situation,this paper comprehensively expounded and decomposed the cultivation situation,existing problems,specific countermeasures and conclusions,so as to re-recognize them.This study provides reference materials for the sustainable and healthy development of the soybean industry.
基金supported by Guangxi Science and Technology Major Program(No.AA23073008)Hubei Key Laboratory of Water System Science for Sponge City Construction(Wuhan University)(No.2023–05)Nanning Innovation and Entrepreneur Leading Talent Project(No.2021001).
文摘The three-dimensional particle electrode system exhibits significant potential for application in the treatment of wastewater.Nonetheless,the advancement of effective granular electrodes characterized by elevated catalytic activity and minimal energy consumption continues to pose a significant challenge.In this research,Fluorine-doped copper-carbon(F/Cu-GAC)particle electrodes were effectively synthesized through an impregnationcalcination technique,utilizing granular activated carbon as the carrier and fluorinedoped modified copper oxides as the catalytic agents.The particle electrodes were subsequently utilized to promote the degradation of 2,4,6-trichlorophenol(2,4,6-TCP)in a threedimensional electrocatalytic reactor(3DER).The F/Cu-GAC particle electrodes were polarized under the action of electric field,which promoted the heterogeneous Fenton-like reaction in which H2O2 generated by two-electron oxygen reduction reaction(2e-ORR)of O_(2) was catalytically decomposed to·OH.The 3DER equipped with F/Cu-GAC particle electrodes showed 100%removal of 2,4,6-TCP and 79.24%removal of TOC with a specific energy consumption(EC)of approximately 0.019 kWh/g·COD after 2 h of operation.The F/Cu-GAC particle electrodes exhibited an overpotential of 0.38 V and an electrochemically active surface area(ECSA)of 715 cm^(2),as determined through linear sweep voltammetry(LSV)and cyclic voltammetry(CV)assessments.These findings suggest a high level of electrocatalytic performance.Furthermore,the catalytic mechanism of the 3DER equipped with F/Cu-GAC particle electrodes was elucidated through the application of X-ray photoelectron spectroscopy(XPS),electron spin resonance(ESR),and active species capture experiments.This investigation offers a novel approach for the effective degradation of 2,4,6-TCP.
