Electron–hole(e–h)recombination is a fundamental process that governs energy dissipation and device efficiency in semiconductors.In two-dimensional(2D)materials,the formation of tightly bound excitons makes exciton-...Electron–hole(e–h)recombination is a fundamental process that governs energy dissipation and device efficiency in semiconductors.In two-dimensional(2D)materials,the formation of tightly bound excitons makes exciton-mediated e–h recombination the dominant decay pathway.In this work,nonradiative e–h recombination within excitons in monolayer MoS_(2) is investigated using first-principles simulations that combine nonadiabatic molecular dynamics with GW and real-time Bethe–Salpeter equation(BSE)propagation.A two-step process is identified:rapid intervalley redistribution induced by exchange interaction,followed by slower phonon-assisted recombination facilitated by exciton binding.By selectively removing the screened Coulomb and exchange terms from the BSE Hamiltonian,their respective contributions are disentangled—exchange interaction is found to increase the number of accessible recombination pathways,while binding reduces the excitation energy and enhances nonradiative decay.A reduction in recombination lifetime by over an order of magnitude is observed due to the excitonic many-body effects.These findings provide microscopic insights for understanding and tuning exciton lifetimes in 2D transition-metal dichalcogenides.展开更多
According to the Mindlin plate theory and the first-order piston theory,this work obtains accurate closed-form eigensolutions for the flutter problem of three-dimensional(3D)rectangular laminated panels.The governing ...According to the Mindlin plate theory and the first-order piston theory,this work obtains accurate closed-form eigensolutions for the flutter problem of three-dimensional(3D)rectangular laminated panels.The governing differential equations are derived by the Hamilton's variational principle,and then solved by the iterative Separation-of-Variable(i SOV)method,which are applicable to arbitrary combinations of homogeneous Boundary Conditions(BCs).However,only the simply-support,clamped and cantilever panels are considered in this work for the sake of clarity.With the closed-form eigensolutions,the flutter frequency,flutter mode and flutter boundary are presented,and the effect of shear deformation and aerodynamic damping on flutter frequencies is investigated.Besides,the relation between panel energy and the work of aerodynamic load is discussed.The numerical comparisons reveal the following.(A)The flutter eigenvalues obtained by the present method are accurate,validated by the Finite Element Method(FEM)and the Galerkin method.(B)When the span-chord ratio is larger than 3,simplifying a 3D panel to 2D(two-dimensional)panel is reasonable and the relative differences of the flutter points predicted by the two models are less than one percent.(C)The reciprocal relationship between the mechanical energy of the panel and the work done by aerodynamic load is verified by using the present flutter eigenvalues and modes,further indicating the high accuracy of the present solutions.(D)The coupling of shear deformation and aerodynamic damping prevents frequency coalescing.展开更多
To address the problem of multi-missile cooperative interception against maneuvering targets at a prespecified impact time and desired Line-of-Sight(LOS)angles in ThreeDimensional(3D)space,this paper proposes a 3D lea...To address the problem of multi-missile cooperative interception against maneuvering targets at a prespecified impact time and desired Line-of-Sight(LOS)angles in ThreeDimensional(3D)space,this paper proposes a 3D leader-following cooperative interception guidance law.First,in the LOS direction of the leader,an impact time-controlled guidance law is derived based on the fixed-time stability theory,which enables the leader to complete the interception task at a prespecified impact time.Next,in the LOS direction of the followers,by introducing a time consensus tracking error function,a fixed-time consensus tracking guidance law is investigated to guarantee the consensus tracking convergence of the time-to-go.Then,in the direction normal to the LOS,by combining the designed global integral sliding mode surface and the second-order Sliding Mode Control(SMC)theory,an innovative 3D LOS-angle-constrained interception guidance law is developed,which eliminates the reaching phase in the traditional sliding mode guidance laws and effectively saves energy consumption.Moreover,it effectively suppresses the chattering phenomenon while avoiding the singularity issue,and compensates for unknown interference caused by target maneuvering online,making it convenient for practical engineering applications.Finally,theoretical proof analysis and multiple sets of numerical simulation results verify the effectiveness,superiority,and robustness of the investigated guidance law.展开更多
Three-dimensional(3D)urban structures play a critical role in informing climate mitigation strategies aimed at the built environment and facilitating sustainable urban development.Regrettably,there exists a significan...Three-dimensional(3D)urban structures play a critical role in informing climate mitigation strategies aimed at the built environment and facilitating sustainable urban development.Regrettably,there exists a significant gap in detailed and consistent data on 3D building space structures with global coverage due to the challenges inherent in the data collection and model calibration processes.In this study,we constructed a global urban structure(GUS-3D)dataset,including building volume,height,and footprint information,at a 500 m spatial resolution using extensive satellite observation products and numerous reference building samples.Our analysis indicated that the total volume of buildings worldwide in2015 exceeded 1×10^(12)m^(3).Over the 1985 to 2015 period,we observed a slight increase in the magnitude of 3D building volume growth(i.e.,it increased from 166.02 km3 during the 1985–2000 period to 175.08km3 during the 2000–2015 period),while the expansion magnitudes of the two-dimensional(2D)building footprint(22.51×10^(3) vs 13.29×10^(3)km^(2))and urban extent(157×10^(3) vs 133.8×10^(3)km^(2))notably decreased.This trend highlights the significant increase in intensive vertical utilization of urban land.Furthermore,we identified significant heterogeneity in building space provision and inequality across cities worldwide.This inequality is particularly pronounced in many populous Asian cities,which has been overlooked in previous studies on economic inequality.The GUS-3D dataset shows great potential to deepen our understanding of the urban environment and creates new horizons for numerous 3D urban studies.展开更多
BACKGROUND Inguinal hernias are common after surgery.Tension-free repair is widely accepted as the main method for managing inguinal hernias.Adequate exposure,coverage,and repair of the myopectineal orifice(MPO)are ne...BACKGROUND Inguinal hernias are common after surgery.Tension-free repair is widely accepted as the main method for managing inguinal hernias.Adequate exposure,coverage,and repair of the myopectineal orifice(MPO)are necessary.However,due to differences in race and sex,people’s body shapes vary.According to European guidelines,the patch should measure 10 cm×15 cm.If any part of the MPO is dissected,injury to the nerves,vascular network,or organs may occur during surgery,thereby leading to inguinal discomfort,pain,and seroma formation after surgery.Therefore,accurate localization and measurement of the boundary of the MPO are crucial for selecting the optimal patch for inguinal hernia repair.AIM To compare the size of the MPO measured on three-dimensional multislice spiral computed tomography(CT)with that measured via laparoscopy and explore the relevant factors influencing the size of the MPO.METHODS Clinical data from 74 patients who underwent laparoscopic tension-free inguinal hernia repair at the General Surgery Department of the First Affiliated Hospital of Anhui University of Science and Technology between September 2022 and July 2024 were collected and analyzed retrospectively.Transabdominal preperitoneal was performed.Sixty-four males and 10 females,with an average age of 58.30±12.32 years,were included.The clinical data of the patients were collected.The boundary of the MPO was measured on three-dimensional CT images before surgery and then again during transabdominal preperitoneal.All the preoperative and intraoperative data were analyzed via paired t-tests.A t-test was used for comparisons of age,body mass index,and sex between the groups.In the comparative analysis,a P value less than 0.05 indicated a significant difference.RESULTS The boundaries of the MPO on 3-dimensional CT images measured 7.05±0.47 cm and 6.27±0.61 cm,and the area of the MPO was 19.54±3.33 cm^(2).The boundaries of the MPO during surgery were 7.18±0.51 cm and 6.17±0.40 cm.The errors were not statistically significant.However,the intraoperative BD(the width of the MPO,P=0.024,P<0.05)and preoperative AC(the length of the MPO,P=0.045,P<0.05)significantly differed according to sex.The AC and BD measurements before and during surgery were not significantly different according to age,body mass index,hernia side or hernia type(P>0.05).CONCLUSION The application of this technology can aid in determining the most appropriate dissection range and patch size.展开更多
Objective:Patients with homologous recombination deficiency(HRD)demonstrate distinct clinicopathological and prognostic features.However,standardised and clinically validated HRD detection methodologies specifically t...Objective:Patients with homologous recombination deficiency(HRD)demonstrate distinct clinicopathological and prognostic features.However,standardised and clinically validated HRD detection methodologies specifically tailored for non-small cell lung cancer(NSCLC)have yet to be established.Further research is needed to clarify the precise role and clinical implications of HRD in NSCLC.Methods:A cohort of 580 treatment-naive NSCLC patients was retrospectively enrolled.Comprehensive genomic profiling(CGP)was performed for all patients,and HRD status was evaluated using two genomic scar score(GSS)-based algorithms:a machine learning-based GSS(ML-GSS)and a continuous linear regression-based GSS(CLR-GSS).To assess the diagnostic performance(sensitivity and specificity)of the ML-GSS and CLR-GSS algorithms for HRD detection,immunohistochemical(IHC)staining was conducted for two HRD-related biomarkers:Schlafen 11(SLFN11)and RAD51.Survival analysis,including progression-free survival(PFS),along with multivariable Cox proportional hazards models,was performed to compare the prognostic value of the two HRD algorithms.Results:Among all patients,146(25.2%)and 46(7.9%)were classified as HRD-positive(HRD+)by ML-GSS and CLR-GSS,respectively.Using SLFN11 IHC expression as the reference standard,comparative analysis demonstrated that ML-GSS exhibited significantly higher sensitivity but lower specificity than CLR-GSS.This trend was consistently observed in RAD51 staining analysis.Compared to HRD-negative(HRD-)patients,MLGSS-defined HRD+cases displayed distinct clinicopathological and genomic features,including a higher prevalence of homologous recombination(HR)-related genes mutations,BRCA1/2 mutations,TP53 mutations,elevated tumor mutation burden(TMB),and increased copy number variations(CNVs).In contrast,CLR-GSSdefined HRD+patients were only enriched for BRCA1/2 mutations,TP53 mutations,and elevated TMB.Furthermore,ML-GSS-defined HRD+status was associated with significantly worse prognosis following first-line therapy compared to HRD-patients.Univariate and multivariable Cox analyses identified ML-GSS-defined HRD+and TP53 mutations as significant predictors and independent risk factors,respectively.No such associations were observed in the CLR-GSS-defined HRD+cohort.Conclusions:ML-GSS demonstrated superior performance to CLR-GSS in assessing chromosomal instability(CIN)and showed greater clinical utility.We recommend the ML-GSS algorithm as a robust and clinically validated tool for HRD/CIN evaluation in NSCLC.Furthermore,ML-GSS-defined HRD+status was identified as both a significant predictor and an independent risk factor.展开更多
Mytilus contain abundant antimicrobial peptides(AMPs)that play a key role in the innate immunity.However,heterologous production of these AMPs remains challenging due to their short sequences,multiple disulfide bonds,...Mytilus contain abundant antimicrobial peptides(AMPs)that play a key role in the innate immunity.However,heterologous production of these AMPs remains challenging due to their short sequences,multiple disulfide bonds,and high content of cationic amino acids,which hinder functional expression in prokaryotic systems such as Escherichia coli.To establish a eukaryotic recombinant expression system for the AMPs of mussel and obtain recombinant mussel AMPs for subsequent studies,we reported the successful recombinant expression of myticofensin B1,a novel defensin-like AMP identified previously in Mytiluscoruscus,using the eukaryotic host Pichia pastoris.The codon-optimized gene encoding the mature myticofensin-B1(composed of 65 amino acid residues,including 6 conserved cysteine residues)was cloned into a pPICZαA vector and expressed in P.pastoris GS115.Structural fidelity of the recombinant peptide was confirmed by liquid chromatography-tandem mass spectrometry(LC-MS/MS),showing a molecular weight of 8849.9 Da,which was consistent with the theoretical prediction.Functional assays demonstrated a broad-spectrum antimicrobial activity of the recombinant myticofensin-B1,with stronger inhibition against Gram-negative bacteria.Scanning electron microscopy revealed different effects of the recombinant myticofensin-B1 against different bacteria.In addition,the recombinant myticofensin-B1 exhibited a very low hemolytic activity against sheep red blood cells and weak cytotoxicity against human A549 lung cancer cells.This study establishes P.pastoris as a powerful platform to produce functional mussel AMP and highlights the potential of the recombinant myticofensin-B1 as a therapeutic agent for aquaculture pathogens and infections.展开更多
It is of great importance to obtain precise trace data,as traces are frequently the sole visible and measurable parameter in most outcrops.The manual recognition and detection of traces on high-resolution three-dimens...It is of great importance to obtain precise trace data,as traces are frequently the sole visible and measurable parameter in most outcrops.The manual recognition and detection of traces on high-resolution three-dimensional(3D)models are relatively straightforward but time-consuming.One potential solution to enhance this process is to use machine learning algorithms to detect the 3D traces.In this study,a unique pixel-wise texture mapper algorithm generates a dense point cloud representation of an outcrop with the precise resolution of the original textured 3D model.A virtual digital image rendering was then employed to capture virtual images of selected regions.This technique helps to overcome limitations caused by the surface morphology of the rock mass,such as restricted access,lighting conditions,and shading effects.After AI-powered trace detection on two-dimensional(2D)images,a 3D data structuring technique was applied to the selected trace pixels.In the 3D data structuring,the trace data were structured through 2D thinning,3D reprojection,clustering,segmentation,and segment linking.Finally,the linked segments were exported as 3D polylines,with each polyline in the output corresponding to a trace.The efficacy of the proposed method was assessed using a 3D model of a real-world case study,which was used to compare the results of artificial intelligence(AI)-aided and human intelligence trace detection.Rosette diagrams,which visualize the distribution of trace orientations,confirmed the high similarity between the automatically and manually generated trace maps.In conclusion,the proposed semi-automatic method was easy to use,fast,and accurate in detecting the dominant jointing system of the rock mass.展开更多
Currently,there are a limited number of dynamic models available for braided composite plates with large overall motions,despite the incorporation of three-dimensional(3D)braided composites into rotating blade compone...Currently,there are a limited number of dynamic models available for braided composite plates with large overall motions,despite the incorporation of three-dimensional(3D)braided composites into rotating blade components.In this paper,a dynamic model of 3D 4-directional braided composite thin plates considering braiding directions is established.Based on Kirchhoff's plate assumptions,the displacement variables of the plate are expressed.By incorporating the braiding directions into the constitutive equation of the braided composites,the dynamic model of the plate considering braiding directions is obtained.The effects of the speeds,braiding directions,and braided angles on the responses of the plate with fixed-axis rotation and translational motion,respectively,are investigated.This paper presents a dynamic theory for calculating the deformation of 3D braided composite structures undergoing both translational and rotational motions.It also provides a simulation method for investigating the dynamic behavior of non-isotropic material plates in various applications.展开更多
Liposarcoma is one of the most common soft tissue sarcomas,however,its occurrence rate is still rare compared to other cancers.Due to its rarity,in vitro experiments are an essential approach to elucidate liposarcoma ...Liposarcoma is one of the most common soft tissue sarcomas,however,its occurrence rate is still rare compared to other cancers.Due to its rarity,in vitro experiments are an essential approach to elucidate liposarcoma pathobiology.Conventional cell culture-based research(2D cell culture)is still playing a pivotal role,while several shortcomings have been recently under discussion.In vivo,mouse models are usually adopted for pre-clinical analyses with expectations to overcome the issues of 2D cell culture.However,they do not fully recapitulate human dedifferentiated liposarcoma(DDLPS)characteristics.Therefore,three-dimensional(3D)culture systems have been the recent research focus in the cell biology field with the expectation to overcome at the same time the disadvantages of 2D cell culture and in vivo animal models and fill in the gap between them.Given the liposarcoma rarity,we believe that 3D cell culture techniques,including 3D cell cultures/co-cultures,and Patient-Derived tumor Organoids(PDOs),represent a promising approach to facilitate liposarcoma investigation and elucidate its molecular mechanisms and effective therapy development.In this review,we first provide a general overview of 3D cell cultures compared to 2D cell cultures.We then focus on one of the recent 3D cell culture applications,Patient-Derived Organoids(PDOs),summarizing and discussing several PDO methodologies.Finally,we discuss the current and future applications of PDOs to sarcoma,particularly in the field of liposarcoma.展开更多
Bone repair remains an important target in tissue engineering,making the development of bioactive scaffolds for effective bone defect repair a critical objective.In this study,β-tricalcium phosphate(β-TCP)scaffolds ...Bone repair remains an important target in tissue engineering,making the development of bioactive scaffolds for effective bone defect repair a critical objective.In this study,β-tricalcium phosphate(β-TCP)scaffolds incorporated with processed pyritum decoction(PPD)were fabricated using three-dimensional(3D)printing-assisted freeze-casting.The produced composite scaffolds were evaluated for their mechanical strength,physicochemical properties,biocompatibility,in vitro proangiogenic activity,and in vivo efficacy in repairing rabbit femoral defects.They not only demonstrated excellent physicochemical properties,enhanced mechanical strength,and good biosafety but also significantly promoted the proliferation,migration,and aggregation of pro-angiogenic human umbilical vein endothelial cells(HUVECs).In vivo studies revealed that all scaffold groups facilitated osteogenesis at the bone defect site,with theβ-TCP scaffolds loaded with PPD markedly enhancing the expression of neurogenic locus Notch homolog protein 1(Notch1),vascular endothelial growth factor(VEGF),bone morphogenetic protein-2(BMP-2),and osteopontin(OPN).Overall,the scaffolds developed in this study exhibited strong angiogenic and osteogenic capabilities both in vitro and in vivo.The incorporation of PPD notably promoted the angiogenic-osteogenic coupling,thereby accelerating bone repair,which suggests that PPD is a promising material for bone repair and that the PPD/β-TCP scaffolds hold great potential as a bone graft alternative.展开更多
In this study, RT-PCR was performed on lung tissue samples from sick pigs in a suspected outbreak of porcine reproductive and respiratory syndrome (PRRS) at a pig farm in Mianyang City, Sichuan Province, China. Positi...In this study, RT-PCR was performed on lung tissue samples from sick pigs in a suspected outbreak of porcine reproductive and respiratory syndrome (PRRS) at a pig farm in Mianyang City, Sichuan Province, China. Positive samples were inoculated into Marc-145 cells to observe lesions. The Marc-145 cells with cytopathic lesions were identified by indirect immunofluorescence. The whole genome sequences of the isolated and purified strains were amplified by RT-PCR and analyzed for homology and genetic evolution. A strain of porcine reproductive and respiratory syndrome virus (PRRSV), named SCMY2023 (GenBank No. PQ179742), was successfully isolated. SCMY2023 has a genome length of 15,321 base pairs (without a poly A tail). Nucleotide and amino acid homology analyses suggest that this strain belongs to Lineage 8, a variant of the highly pathogenic porcine reproductive and respiratory syndrome virus (HP-PRRSV) prevalent in China. Recombination and genetic evolution analyses indicate that this isolate is a PRRSV variant that recombined with HuN-ZZ (Lineage 8, 98.79% homology) on the backbone of the SCSN2020 strain (Lineage 8, 99.35% homology) in the recombination region from 4407 to 13,107 nucleotides (ORF1a to ORF3). In-depth study of the genetic recombination of this isolate can provide a reference for the prevention and control of PRRS.展开更多
The development of minimally invasive surgery has transformed the management of gastrointestinal cancer.Notably,three-dimensional visualization systems have increased surgical precision.This editorial discusses a rece...The development of minimally invasive surgery has transformed the management of gastrointestinal cancer.Notably,three-dimensional visualization systems have increased surgical precision.This editorial discusses a recent study by Shen and Zhang,which compared the clinical applications of naked-eye threedimensional laparoscopic systems vs traditional optical systems in radical surgery for gastric and colorectal cancer.Both systems appeared to yield comparable surgical and oncological outcomes in terms of safety parameters,operating times,and quality of lymph node dissection.However,the spectacle-free system’s technical and logistical limitations hindered its effects on the surgical team’s overall competency.This editorial examines the authors’findings within the broader context of the evolution of oncologic laparoscopy,discusses the relevance of the results in light of the current literature,and proposes future research directions focused on multicenter validation,comprehensive ergonomic analysis,and technological advancements aimed at enhancing intraoperative collaboration.As technology continues to evolve,clinical implementation of new methods must be supported by robust scientific evidence and standardized criteria,to ensure tangible improvements in efficiency,safety,and oncologic outcomes.展开更多
Single-stranded DNA-binding proteins(SSBs)play essential roles in the replication,recombination and repair processes of organellar DNA molecules.In Arabidopsis thaliana,SSBs are encoded by a small family of two genes(...Single-stranded DNA-binding proteins(SSBs)play essential roles in the replication,recombination and repair processes of organellar DNA molecules.In Arabidopsis thaliana,SSBs are encoded by a small family of two genes(SSB1 and SSB2).However,the functional divergence of these two SSB copies in plants remains largely unknown,and detailed studies regarding their roles in the replication and recombination of organellar genomes are still incomplete.In this study,phylogenetic,gene structure and protein motif analyses all suggested that SSB1 and SSB2 probably diverged during the early evolution of seed plants.Based on accurate long-read sequencing results,ssb1 and ssb2 mutants had decreased copy numbers for both mitochondrial DNA(mtDNA)and plastid DNA(ptDNA),accompanied by a slight increase in structural rearrangements mediated by intermediate-sized repeats in mt genome and small-scale variants in both genomes.Our findings provide an important foundation for further investigating the effects of DNA dosage in the regulation of mutation frequencies in plant organellar genomes.展开更多
The three-dimensional particle electrode system exhibits significant potential for application in the treatment of wastewater.Nonetheless,the advancement of effective granular electrodes characterized by elevated cata...The three-dimensional particle electrode system exhibits significant potential for application in the treatment of wastewater.Nonetheless,the advancement of effective granular electrodes characterized by elevated catalytic activity and minimal energy consumption continues to pose a significant challenge.In this research,Fluorine-doped copper-carbon(F/Cu-GAC)particle electrodes were effectively synthesized through an impregnationcalcination technique,utilizing granular activated carbon as the carrier and fluorinedoped modified copper oxides as the catalytic agents.The particle electrodes were subsequently utilized to promote the degradation of 2,4,6-trichlorophenol(2,4,6-TCP)in a threedimensional electrocatalytic reactor(3DER).The F/Cu-GAC particle electrodes were polarized under the action of electric field,which promoted the heterogeneous Fenton-like reaction in which H2O2 generated by two-electron oxygen reduction reaction(2e-ORR)of O_(2) was catalytically decomposed to·OH.The 3DER equipped with F/Cu-GAC particle electrodes showed 100%removal of 2,4,6-TCP and 79.24%removal of TOC with a specific energy consumption(EC)of approximately 0.019 kWh/g·COD after 2 h of operation.The F/Cu-GAC particle electrodes exhibited an overpotential of 0.38 V and an electrochemically active surface area(ECSA)of 715 cm^(2),as determined through linear sweep voltammetry(LSV)and cyclic voltammetry(CV)assessments.These findings suggest a high level of electrocatalytic performance.Furthermore,the catalytic mechanism of the 3DER equipped with F/Cu-GAC particle electrodes was elucidated through the application of X-ray photoelectron spectroscopy(XPS),electron spin resonance(ESR),and active species capture experiments.This investigation offers a novel approach for the effective degradation of 2,4,6-TCP.展开更多
BACKGROUND Patients with colorectal cancer(CRC)exhibiting microsatellite instability(MSI)-high generally demonstrate a favorable response to immunotherapy.In contrast,the efficacy of immunotherapy in microsatellite-st...BACKGROUND Patients with colorectal cancer(CRC)exhibiting microsatellite instability(MSI)-high generally demonstrate a favorable response to immunotherapy.In contrast,the efficacy of immunotherapy in microsatellite-stable(MSS)CRC patients is considerably restricted.This study sought to evaluate the effectiveness of immu-notherapy in MSS patients characterized by homologous recombination defi-ciency(HRD)as opposed to those with homologous recombination proficiency(HRP).AIM To investigate and compare the clinicopathological characteristics,treatment modalities,and outcomes between the HRD and HRP groups in CRC.METHODS Next-generation sequencing was performed on 268 CRC patients to identify tumor-associated genetic alterations and assess their HRD scores and MSI status.Patients with HRD-related gene alterations or an HRD score≥30 were classified into the HRD group,while the remaining patients were assigned to the HRP group.Clinical data,including staging and treatment regimens,were collected for analysis.Cox regression and Kaplan-Meier survival curves were employed to evaluate whether the HRD group demonstrated improved survival outcomes following immunotherapy treatment.RESULTS Among the 268 patients,64 were classified into the HRD group,which had a higher proportion of early-stage CRC diagnoses compared to the HRP group.Kaplan-Meier survival curves indicated significantly better survival rates in the HRD group compared to the HRP group across all cohorts,as well as among MSS patients treated with immunotherapy(P<0.05).CONCLUSION This study demonstrates that CRC patients with HRD have a more favorable prognosis and suggests that HRD status could serve as a predictive marker for immunotherapy response in MSS patients.展开更多
The present work reports on microscopic analyses of recombination at grain boundaries(GBs)in polycrystalline Li-doped(Ag,Cu)_(2)ZnSn(S,Se)_(4)(LiACZTSSe)and Cu_(2)ZnSnS_(4)(CZTS)absorber layers in high-efficiency sola...The present work reports on microscopic analyses of recombination at grain boundaries(GBs)in polycrystalline Li-doped(Ag,Cu)_(2)ZnSn(S,Se)_(4)(LiACZTSSe)and Cu_(2)ZnSnS_(4)(CZTS)absorber layers in high-efficiency solar cells(conversion efficiencies of 14.4%and 10.8%).Recombination velocities sG B were determined at a large number of GBs by evaluating profiles extracted from cathodoluminescence intensity distributions across GBs in these polycrystalline layers.In both Li-ACZTSSe and CZTS absorber layers,the sG B values exhibited wide ranges over several orders of magnitude with a median values of 680 and 1100 cm s^(-1)for the Li-ACZTSSe and CZTS absorbers.展开更多
In this study,CiteSpace software is used to carry out visual analysis on the three-dimensional research literature on urban recreation space from the perspective of compact city theory in the past 20 years,exploring t...In this study,CiteSpace software is used to carry out visual analysis on the three-dimensional research literature on urban recreation space from the perspective of compact city theory in the past 20 years,exploring the scientific development trend and research hotspots in this field.The results show that the number of published documents shows a fluctuating upward trend,and the significant growth rate reflects the role of policy orientation in promoting the concept of compact city.The co-occurrence analysis of keywords reveals the research hotspots of“compact city”,“recreation space”and“urban park”,while the emergence of new keywords such as“vertical city”and“spatial justice”indicates the new trend of recent research.The cluster analysis and timeline map further show the evolution of research themes,with“compact city”being the largest cluster and having rich connections with other themes such as“urban design”and“urban park”.展开更多
BACKGROUND Ganglioneuroma is a rare,well-differentiated,slow-growing benign tumor of the peripheral nerves,with surgical resection being the only curative treatment.Surgical resection of ganglioneuromas encasing major...BACKGROUND Ganglioneuroma is a rare,well-differentiated,slow-growing benign tumor of the peripheral nerves,with surgical resection being the only curative treatment.Surgical resection of ganglioneuromas encasing major blood vessels remains a substantial clinical challenge.Traditionally,these cases often require open abdominal surgery or combined organ resections,and in some instances,the tumors are considered unresectable.Currently,no reports have described the resection of such tumors via laparoscopy.CASE SUMMARY A 35-year-old woman was admitted to our hospital after the incidental discovery of a retroperitoneal space-occupying lesion.Imaging revealed a mass with the celiac axis and superior mesenteric artery passing through it.A neurogenic tumor was suspected,with ganglioneuroma being the most likely diagnosis.Following comprehensive preoperative preparation,the retroperitoneal tumor was resected using a three-dimensional laparoscopy combined with an organ suspension technique.The surgical approach involved incising the tumor along the vascular axis and conducting meticulous,vascular-preserving tumor excision.The operation lasted approximately 458 minutes,with an estimated blood loss of 50 mL.The patient was discharged on the 8th postoperative day.A transient liver injury occurred after surgery but improved rapidly.After 11 months of postoperative follow-up,no complications or tumor recurrence were observed.CONCLUSION This case illustrates the feasibility of minimally invasive laparoscopic resection for retroperitoneal ganglioneuromas encasing major blood vessels.展开更多
Thermal metamaterial represents a groundbreaking approach to control heat conduction,and,as a crucial component,thermal invisibility is of utmost importance for heat management.Despite the flourishing development of t...Thermal metamaterial represents a groundbreaking approach to control heat conduction,and,as a crucial component,thermal invisibility is of utmost importance for heat management.Despite the flourishing development of thermal invisibility schemes,they still face two limitations in practical applications.First,objects are typically completely enclosed in traditional cloaks,making them difficult to use and unsuitable for objects with heat sources.Second,although some theoretical proposals have been put forth to change the thermal conductivity of materials to achieve dynamic invisibility,their designs are complex and rigid,making them unsuitable for large-scale use in real threedimensional(3D)spaces.Here,we propose a concept of a thermal dome to achieve 3D invisibility.Our scheme includes an open functional area,greatly enhancing its usability and applicability.It features a reconfigurable structure,constructed with simple isotropic natural materials,making it suitable for dynamic requirements.The performance of our reconfigurable thermal dome has been confirmed through simulations and experiments,consistent with the theory.The introduction of this concept can greatly advance the development of thermal invisibility technology from theory to engineering and provide inspiration for other physical domains,such as direct current electric fields and magnetic fields.展开更多
基金supported by the National Key Research and Development Program of China (Grant Nos.2024YFA1409800 for J.Z.and2024YFA1408603 for Q.Z.)the National Natural Science Foundation of China (Grant Nos.12125408,12334004for J.Z.,and 12174363 for Q.Z.)+1 种基金the Innovation Program for Quantum Science and Technology (Grant No.2021ZD0303306 for J.Z.)the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB0450101 for J.Z.)。
文摘Electron–hole(e–h)recombination is a fundamental process that governs energy dissipation and device efficiency in semiconductors.In two-dimensional(2D)materials,the formation of tightly bound excitons makes exciton-mediated e–h recombination the dominant decay pathway.In this work,nonradiative e–h recombination within excitons in monolayer MoS_(2) is investigated using first-principles simulations that combine nonadiabatic molecular dynamics with GW and real-time Bethe–Salpeter equation(BSE)propagation.A two-step process is identified:rapid intervalley redistribution induced by exchange interaction,followed by slower phonon-assisted recombination facilitated by exciton binding.By selectively removing the screened Coulomb and exchange terms from the BSE Hamiltonian,their respective contributions are disentangled—exchange interaction is found to increase the number of accessible recombination pathways,while binding reduces the excitation energy and enhances nonradiative decay.A reduction in recombination lifetime by over an order of magnitude is observed due to the excitonic many-body effects.These findings provide microscopic insights for understanding and tuning exciton lifetimes in 2D transition-metal dichalcogenides.
基金support of the National Natural Science Foundation of China(No.12172023)。
文摘According to the Mindlin plate theory and the first-order piston theory,this work obtains accurate closed-form eigensolutions for the flutter problem of three-dimensional(3D)rectangular laminated panels.The governing differential equations are derived by the Hamilton's variational principle,and then solved by the iterative Separation-of-Variable(i SOV)method,which are applicable to arbitrary combinations of homogeneous Boundary Conditions(BCs).However,only the simply-support,clamped and cantilever panels are considered in this work for the sake of clarity.With the closed-form eigensolutions,the flutter frequency,flutter mode and flutter boundary are presented,and the effect of shear deformation and aerodynamic damping on flutter frequencies is investigated.Besides,the relation between panel energy and the work of aerodynamic load is discussed.The numerical comparisons reveal the following.(A)The flutter eigenvalues obtained by the present method are accurate,validated by the Finite Element Method(FEM)and the Galerkin method.(B)When the span-chord ratio is larger than 3,simplifying a 3D panel to 2D(two-dimensional)panel is reasonable and the relative differences of the flutter points predicted by the two models are less than one percent.(C)The reciprocal relationship between the mechanical energy of the panel and the work done by aerodynamic load is verified by using the present flutter eigenvalues and modes,further indicating the high accuracy of the present solutions.(D)The coupling of shear deformation and aerodynamic damping prevents frequency coalescing.
文摘To address the problem of multi-missile cooperative interception against maneuvering targets at a prespecified impact time and desired Line-of-Sight(LOS)angles in ThreeDimensional(3D)space,this paper proposes a 3D leader-following cooperative interception guidance law.First,in the LOS direction of the leader,an impact time-controlled guidance law is derived based on the fixed-time stability theory,which enables the leader to complete the interception task at a prespecified impact time.Next,in the LOS direction of the followers,by introducing a time consensus tracking error function,a fixed-time consensus tracking guidance law is investigated to guarantee the consensus tracking convergence of the time-to-go.Then,in the direction normal to the LOS,by combining the designed global integral sliding mode surface and the second-order Sliding Mode Control(SMC)theory,an innovative 3D LOS-angle-constrained interception guidance law is developed,which eliminates the reaching phase in the traditional sliding mode guidance laws and effectively saves energy consumption.Moreover,it effectively suppresses the chattering phenomenon while avoiding the singularity issue,and compensates for unknown interference caused by target maneuvering online,making it convenient for practical engineering applications.Finally,theoretical proof analysis and multiple sets of numerical simulation results verify the effectiveness,superiority,and robustness of the investigated guidance law.
基金supported by the National Science Fund for Distinguished Young Scholars(42225107)the National Natural Science Foundation of China(42001326,42371414,42171409,and 42271419)+1 种基金the Natural Science Foundation of Guangdong Province of China(2022A1515012207)the Basic and Applied Basic Research Project of Guangzhou Science and Technology Planning(202201011539)。
文摘Three-dimensional(3D)urban structures play a critical role in informing climate mitigation strategies aimed at the built environment and facilitating sustainable urban development.Regrettably,there exists a significant gap in detailed and consistent data on 3D building space structures with global coverage due to the challenges inherent in the data collection and model calibration processes.In this study,we constructed a global urban structure(GUS-3D)dataset,including building volume,height,and footprint information,at a 500 m spatial resolution using extensive satellite observation products and numerous reference building samples.Our analysis indicated that the total volume of buildings worldwide in2015 exceeded 1×10^(12)m^(3).Over the 1985 to 2015 period,we observed a slight increase in the magnitude of 3D building volume growth(i.e.,it increased from 166.02 km3 during the 1985–2000 period to 175.08km3 during the 2000–2015 period),while the expansion magnitudes of the two-dimensional(2D)building footprint(22.51×10^(3) vs 13.29×10^(3)km^(2))and urban extent(157×10^(3) vs 133.8×10^(3)km^(2))notably decreased.This trend highlights the significant increase in intensive vertical utilization of urban land.Furthermore,we identified significant heterogeneity in building space provision and inequality across cities worldwide.This inequality is particularly pronounced in many populous Asian cities,which has been overlooked in previous studies on economic inequality.The GUS-3D dataset shows great potential to deepen our understanding of the urban environment and creates new horizons for numerous 3D urban studies.
基金Supported by the 2022 Provincial Quality Engineering Project for Higher Education Institutions,No.2022sx031the 2023 Provincial Quality Engineering Project for Higher Education Institutions,No.2023jyxm1071.
文摘BACKGROUND Inguinal hernias are common after surgery.Tension-free repair is widely accepted as the main method for managing inguinal hernias.Adequate exposure,coverage,and repair of the myopectineal orifice(MPO)are necessary.However,due to differences in race and sex,people’s body shapes vary.According to European guidelines,the patch should measure 10 cm×15 cm.If any part of the MPO is dissected,injury to the nerves,vascular network,or organs may occur during surgery,thereby leading to inguinal discomfort,pain,and seroma formation after surgery.Therefore,accurate localization and measurement of the boundary of the MPO are crucial for selecting the optimal patch for inguinal hernia repair.AIM To compare the size of the MPO measured on three-dimensional multislice spiral computed tomography(CT)with that measured via laparoscopy and explore the relevant factors influencing the size of the MPO.METHODS Clinical data from 74 patients who underwent laparoscopic tension-free inguinal hernia repair at the General Surgery Department of the First Affiliated Hospital of Anhui University of Science and Technology between September 2022 and July 2024 were collected and analyzed retrospectively.Transabdominal preperitoneal was performed.Sixty-four males and 10 females,with an average age of 58.30±12.32 years,were included.The clinical data of the patients were collected.The boundary of the MPO was measured on three-dimensional CT images before surgery and then again during transabdominal preperitoneal.All the preoperative and intraoperative data were analyzed via paired t-tests.A t-test was used for comparisons of age,body mass index,and sex between the groups.In the comparative analysis,a P value less than 0.05 indicated a significant difference.RESULTS The boundaries of the MPO on 3-dimensional CT images measured 7.05±0.47 cm and 6.27±0.61 cm,and the area of the MPO was 19.54±3.33 cm^(2).The boundaries of the MPO during surgery were 7.18±0.51 cm and 6.17±0.40 cm.The errors were not statistically significant.However,the intraoperative BD(the width of the MPO,P=0.024,P<0.05)and preoperative AC(the length of the MPO,P=0.045,P<0.05)significantly differed according to sex.The AC and BD measurements before and during surgery were not significantly different according to age,body mass index,hernia side or hernia type(P>0.05).CONCLUSION The application of this technology can aid in determining the most appropriate dissection range and patch size.
基金supported by the National High Level Hospital Clinical Research Funding(No.BJ-2019-195)the National High Level Hospital Clinical Research Funding(No.BJ-2023-090)。
文摘Objective:Patients with homologous recombination deficiency(HRD)demonstrate distinct clinicopathological and prognostic features.However,standardised and clinically validated HRD detection methodologies specifically tailored for non-small cell lung cancer(NSCLC)have yet to be established.Further research is needed to clarify the precise role and clinical implications of HRD in NSCLC.Methods:A cohort of 580 treatment-naive NSCLC patients was retrospectively enrolled.Comprehensive genomic profiling(CGP)was performed for all patients,and HRD status was evaluated using two genomic scar score(GSS)-based algorithms:a machine learning-based GSS(ML-GSS)and a continuous linear regression-based GSS(CLR-GSS).To assess the diagnostic performance(sensitivity and specificity)of the ML-GSS and CLR-GSS algorithms for HRD detection,immunohistochemical(IHC)staining was conducted for two HRD-related biomarkers:Schlafen 11(SLFN11)and RAD51.Survival analysis,including progression-free survival(PFS),along with multivariable Cox proportional hazards models,was performed to compare the prognostic value of the two HRD algorithms.Results:Among all patients,146(25.2%)and 46(7.9%)were classified as HRD-positive(HRD+)by ML-GSS and CLR-GSS,respectively.Using SLFN11 IHC expression as the reference standard,comparative analysis demonstrated that ML-GSS exhibited significantly higher sensitivity but lower specificity than CLR-GSS.This trend was consistently observed in RAD51 staining analysis.Compared to HRD-negative(HRD-)patients,MLGSS-defined HRD+cases displayed distinct clinicopathological and genomic features,including a higher prevalence of homologous recombination(HR)-related genes mutations,BRCA1/2 mutations,TP53 mutations,elevated tumor mutation burden(TMB),and increased copy number variations(CNVs).In contrast,CLR-GSSdefined HRD+patients were only enriched for BRCA1/2 mutations,TP53 mutations,and elevated TMB.Furthermore,ML-GSS-defined HRD+status was associated with significantly worse prognosis following first-line therapy compared to HRD-patients.Univariate and multivariable Cox analyses identified ML-GSS-defined HRD+and TP53 mutations as significant predictors and independent risk factors,respectively.No such associations were observed in the CLR-GSS-defined HRD+cohort.Conclusions:ML-GSS demonstrated superior performance to CLR-GSS in assessing chromosomal instability(CIN)and showed greater clinical utility.We recommend the ML-GSS algorithm as a robust and clinically validated tool for HRD/CIN evaluation in NSCLC.Furthermore,ML-GSS-defined HRD+status was identified as both a significant predictor and an independent risk factor.
基金supported by the National Natural Science Foundation of China(32271580,42020104009)the Fundamental Research Funds for Zhejiang Provincial Universities and Research Institutes(JX6311101923)。
文摘Mytilus contain abundant antimicrobial peptides(AMPs)that play a key role in the innate immunity.However,heterologous production of these AMPs remains challenging due to their short sequences,multiple disulfide bonds,and high content of cationic amino acids,which hinder functional expression in prokaryotic systems such as Escherichia coli.To establish a eukaryotic recombinant expression system for the AMPs of mussel and obtain recombinant mussel AMPs for subsequent studies,we reported the successful recombinant expression of myticofensin B1,a novel defensin-like AMP identified previously in Mytiluscoruscus,using the eukaryotic host Pichia pastoris.The codon-optimized gene encoding the mature myticofensin-B1(composed of 65 amino acid residues,including 6 conserved cysteine residues)was cloned into a pPICZαA vector and expressed in P.pastoris GS115.Structural fidelity of the recombinant peptide was confirmed by liquid chromatography-tandem mass spectrometry(LC-MS/MS),showing a molecular weight of 8849.9 Da,which was consistent with the theoretical prediction.Functional assays demonstrated a broad-spectrum antimicrobial activity of the recombinant myticofensin-B1,with stronger inhibition against Gram-negative bacteria.Scanning electron microscopy revealed different effects of the recombinant myticofensin-B1 against different bacteria.In addition,the recombinant myticofensin-B1 exhibited a very low hemolytic activity against sheep red blood cells and weak cytotoxicity against human A549 lung cancer cells.This study establishes P.pastoris as a powerful platform to produce functional mussel AMP and highlights the potential of the recombinant myticofensin-B1 as a therapeutic agent for aquaculture pathogens and infections.
基金supported by grants from the Human Resources Development program (Grant No.20204010600250)the Training Program of CCUS for the Green Growth (Grant No.20214000000500)by the Korea Institute of Energy Technology Evaluation and Planning (KETEP)funded by the Ministry of Trade,Industry,and Energy of the Korean Government (MOTIE).
文摘It is of great importance to obtain precise trace data,as traces are frequently the sole visible and measurable parameter in most outcrops.The manual recognition and detection of traces on high-resolution three-dimensional(3D)models are relatively straightforward but time-consuming.One potential solution to enhance this process is to use machine learning algorithms to detect the 3D traces.In this study,a unique pixel-wise texture mapper algorithm generates a dense point cloud representation of an outcrop with the precise resolution of the original textured 3D model.A virtual digital image rendering was then employed to capture virtual images of selected regions.This technique helps to overcome limitations caused by the surface morphology of the rock mass,such as restricted access,lighting conditions,and shading effects.After AI-powered trace detection on two-dimensional(2D)images,a 3D data structuring technique was applied to the selected trace pixels.In the 3D data structuring,the trace data were structured through 2D thinning,3D reprojection,clustering,segmentation,and segment linking.Finally,the linked segments were exported as 3D polylines,with each polyline in the output corresponding to a trace.The efficacy of the proposed method was assessed using a 3D model of a real-world case study,which was used to compare the results of artificial intelligence(AI)-aided and human intelligence trace detection.Rosette diagrams,which visualize the distribution of trace orientations,confirmed the high similarity between the automatically and manually generated trace maps.In conclusion,the proposed semi-automatic method was easy to use,fast,and accurate in detecting the dominant jointing system of the rock mass.
基金Project supported by the National Natural Science Foundation of China(Nos.12372071 and 12372070)the Aeronautical Science Fund of China(No.2022Z055052001)the Foundation of China Scholarship Council(No.202306830079)。
文摘Currently,there are a limited number of dynamic models available for braided composite plates with large overall motions,despite the incorporation of three-dimensional(3D)braided composites into rotating blade components.In this paper,a dynamic model of 3D 4-directional braided composite thin plates considering braiding directions is established.Based on Kirchhoff's plate assumptions,the displacement variables of the plate are expressed.By incorporating the braiding directions into the constitutive equation of the braided composites,the dynamic model of the plate considering braiding directions is obtained.The effects of the speeds,braiding directions,and braided angles on the responses of the plate with fixed-axis rotation and translational motion,respectively,are investigated.This paper presents a dynamic theory for calculating the deformation of 3D braided composite structures undergoing both translational and rotational motions.It also provides a simulation method for investigating the dynamic behavior of non-isotropic material plates in various applications.
文摘Liposarcoma is one of the most common soft tissue sarcomas,however,its occurrence rate is still rare compared to other cancers.Due to its rarity,in vitro experiments are an essential approach to elucidate liposarcoma pathobiology.Conventional cell culture-based research(2D cell culture)is still playing a pivotal role,while several shortcomings have been recently under discussion.In vivo,mouse models are usually adopted for pre-clinical analyses with expectations to overcome the issues of 2D cell culture.However,they do not fully recapitulate human dedifferentiated liposarcoma(DDLPS)characteristics.Therefore,three-dimensional(3D)culture systems have been the recent research focus in the cell biology field with the expectation to overcome at the same time the disadvantages of 2D cell culture and in vivo animal models and fill in the gap between them.Given the liposarcoma rarity,we believe that 3D cell culture techniques,including 3D cell cultures/co-cultures,and Patient-Derived tumor Organoids(PDOs),represent a promising approach to facilitate liposarcoma investigation and elucidate its molecular mechanisms and effective therapy development.In this review,we first provide a general overview of 3D cell cultures compared to 2D cell cultures.We then focus on one of the recent 3D cell culture applications,Patient-Derived Organoids(PDOs),summarizing and discussing several PDO methodologies.Finally,we discuss the current and future applications of PDOs to sarcoma,particularly in the field of liposarcoma.
基金supported by the National Science Foundation of China(Nos.81373970,81773902,81973484,and 32171402)the National College Students Innovation and Entrepreneurship Training Program(No.201810315019)+4 种基金the Postgraduate Research and Practice Innovation Program of Jiangsu Province(Nos.SJCX21_0712 and KYCX23_2052)the Scientific Research Project of Jiangsu Provincial Association of Traditional Chinese Medicine(No.XYLD2024013)the Youth Scientific Research Project of Jiangyin Municipal Health Commission(No.Q202402)the Natural Science Foundation Project of Nanjing University of Chinese Medicine(No.XZR2024173)the Jiangyin Science and Technology Innovation Special Fund Project(No.JY0603A011014230032PB),China.
文摘Bone repair remains an important target in tissue engineering,making the development of bioactive scaffolds for effective bone defect repair a critical objective.In this study,β-tricalcium phosphate(β-TCP)scaffolds incorporated with processed pyritum decoction(PPD)were fabricated using three-dimensional(3D)printing-assisted freeze-casting.The produced composite scaffolds were evaluated for their mechanical strength,physicochemical properties,biocompatibility,in vitro proangiogenic activity,and in vivo efficacy in repairing rabbit femoral defects.They not only demonstrated excellent physicochemical properties,enhanced mechanical strength,and good biosafety but also significantly promoted the proliferation,migration,and aggregation of pro-angiogenic human umbilical vein endothelial cells(HUVECs).In vivo studies revealed that all scaffold groups facilitated osteogenesis at the bone defect site,with theβ-TCP scaffolds loaded with PPD markedly enhancing the expression of neurogenic locus Notch homolog protein 1(Notch1),vascular endothelial growth factor(VEGF),bone morphogenetic protein-2(BMP-2),and osteopontin(OPN).Overall,the scaffolds developed in this study exhibited strong angiogenic and osteogenic capabilities both in vitro and in vivo.The incorporation of PPD notably promoted the angiogenic-osteogenic coupling,thereby accelerating bone repair,which suggests that PPD is a promising material for bone repair and that the PPD/β-TCP scaffolds hold great potential as a bone graft alternative.
文摘In this study, RT-PCR was performed on lung tissue samples from sick pigs in a suspected outbreak of porcine reproductive and respiratory syndrome (PRRS) at a pig farm in Mianyang City, Sichuan Province, China. Positive samples were inoculated into Marc-145 cells to observe lesions. The Marc-145 cells with cytopathic lesions were identified by indirect immunofluorescence. The whole genome sequences of the isolated and purified strains were amplified by RT-PCR and analyzed for homology and genetic evolution. A strain of porcine reproductive and respiratory syndrome virus (PRRSV), named SCMY2023 (GenBank No. PQ179742), was successfully isolated. SCMY2023 has a genome length of 15,321 base pairs (without a poly A tail). Nucleotide and amino acid homology analyses suggest that this strain belongs to Lineage 8, a variant of the highly pathogenic porcine reproductive and respiratory syndrome virus (HP-PRRSV) prevalent in China. Recombination and genetic evolution analyses indicate that this isolate is a PRRSV variant that recombined with HuN-ZZ (Lineage 8, 98.79% homology) on the backbone of the SCSN2020 strain (Lineage 8, 99.35% homology) in the recombination region from 4407 to 13,107 nucleotides (ORF1a to ORF3). In-depth study of the genetic recombination of this isolate can provide a reference for the prevention and control of PRRS.
文摘The development of minimally invasive surgery has transformed the management of gastrointestinal cancer.Notably,three-dimensional visualization systems have increased surgical precision.This editorial discusses a recent study by Shen and Zhang,which compared the clinical applications of naked-eye threedimensional laparoscopic systems vs traditional optical systems in radical surgery for gastric and colorectal cancer.Both systems appeared to yield comparable surgical and oncological outcomes in terms of safety parameters,operating times,and quality of lymph node dissection.However,the spectacle-free system’s technical and logistical limitations hindered its effects on the surgical team’s overall competency.This editorial examines the authors’findings within the broader context of the evolution of oncologic laparoscopy,discusses the relevance of the results in light of the current literature,and proposes future research directions focused on multicenter validation,comprehensive ergonomic analysis,and technological advancements aimed at enhancing intraoperative collaboration.As technology continues to evolve,clinical implementation of new methods must be supported by robust scientific evidence and standardized criteria,to ensure tangible improvements in efficiency,safety,and oncologic outcomes.
基金supported by grants from the National Natural Science Foundation of China(32170238,32400191)Guangdong Basic and Applied Basic Research Foundation(2023A1515111029)+2 种基金the Science,Technology and Innovation Commission of Shenzhen Municipality(RCYX20200714114538196)the Chinese Academy of Agricultural Sciences Elite Youth Program(grant 110243160001007)the Guangdong Pearl River Talent Program(2021QN02N792)。
文摘Single-stranded DNA-binding proteins(SSBs)play essential roles in the replication,recombination and repair processes of organellar DNA molecules.In Arabidopsis thaliana,SSBs are encoded by a small family of two genes(SSB1 and SSB2).However,the functional divergence of these two SSB copies in plants remains largely unknown,and detailed studies regarding their roles in the replication and recombination of organellar genomes are still incomplete.In this study,phylogenetic,gene structure and protein motif analyses all suggested that SSB1 and SSB2 probably diverged during the early evolution of seed plants.Based on accurate long-read sequencing results,ssb1 and ssb2 mutants had decreased copy numbers for both mitochondrial DNA(mtDNA)and plastid DNA(ptDNA),accompanied by a slight increase in structural rearrangements mediated by intermediate-sized repeats in mt genome and small-scale variants in both genomes.Our findings provide an important foundation for further investigating the effects of DNA dosage in the regulation of mutation frequencies in plant organellar genomes.
基金supported by Guangxi Science and Technology Major Program(No.AA23073008)Hubei Key Laboratory of Water System Science for Sponge City Construction(Wuhan University)(No.2023–05)Nanning Innovation and Entrepreneur Leading Talent Project(No.2021001).
文摘The three-dimensional particle electrode system exhibits significant potential for application in the treatment of wastewater.Nonetheless,the advancement of effective granular electrodes characterized by elevated catalytic activity and minimal energy consumption continues to pose a significant challenge.In this research,Fluorine-doped copper-carbon(F/Cu-GAC)particle electrodes were effectively synthesized through an impregnationcalcination technique,utilizing granular activated carbon as the carrier and fluorinedoped modified copper oxides as the catalytic agents.The particle electrodes were subsequently utilized to promote the degradation of 2,4,6-trichlorophenol(2,4,6-TCP)in a threedimensional electrocatalytic reactor(3DER).The F/Cu-GAC particle electrodes were polarized under the action of electric field,which promoted the heterogeneous Fenton-like reaction in which H2O2 generated by two-electron oxygen reduction reaction(2e-ORR)of O_(2) was catalytically decomposed to·OH.The 3DER equipped with F/Cu-GAC particle electrodes showed 100%removal of 2,4,6-TCP and 79.24%removal of TOC with a specific energy consumption(EC)of approximately 0.019 kWh/g·COD after 2 h of operation.The F/Cu-GAC particle electrodes exhibited an overpotential of 0.38 V and an electrochemically active surface area(ECSA)of 715 cm^(2),as determined through linear sweep voltammetry(LSV)and cyclic voltammetry(CV)assessments.These findings suggest a high level of electrocatalytic performance.Furthermore,the catalytic mechanism of the 3DER equipped with F/Cu-GAC particle electrodes was elucidated through the application of X-ray photoelectron spectroscopy(XPS),electron spin resonance(ESR),and active species capture experiments.This investigation offers a novel approach for the effective degradation of 2,4,6-TCP.
基金Supported by Natural Science Foundation of Guangdong Province,No.2021A1515011146 and No.2023A1515010785Key Areas Research and Development Programs of Guangdong Province,No.2023B1111050009.
文摘BACKGROUND Patients with colorectal cancer(CRC)exhibiting microsatellite instability(MSI)-high generally demonstrate a favorable response to immunotherapy.In contrast,the efficacy of immunotherapy in microsatellite-stable(MSS)CRC patients is considerably restricted.This study sought to evaluate the effectiveness of immu-notherapy in MSS patients characterized by homologous recombination defi-ciency(HRD)as opposed to those with homologous recombination proficiency(HRP).AIM To investigate and compare the clinicopathological characteristics,treatment modalities,and outcomes between the HRD and HRP groups in CRC.METHODS Next-generation sequencing was performed on 268 CRC patients to identify tumor-associated genetic alterations and assess their HRD scores and MSI status.Patients with HRD-related gene alterations or an HRD score≥30 were classified into the HRD group,while the remaining patients were assigned to the HRP group.Clinical data,including staging and treatment regimens,were collected for analysis.Cox regression and Kaplan-Meier survival curves were employed to evaluate whether the HRD group demonstrated improved survival outcomes following immunotherapy treatment.RESULTS Among the 268 patients,64 were classified into the HRD group,which had a higher proportion of early-stage CRC diagnoses compared to the HRP group.Kaplan-Meier survival curves indicated significantly better survival rates in the HRD group compared to the HRP group across all cohorts,as well as among MSS patients treated with immunotherapy(P<0.05).CONCLUSION This study demonstrates that CRC patients with HRD have a more favorable prognosis and suggests that HRD status could serve as a predictive marker for immunotherapy response in MSS patients.
基金support by the German-Israeli Helmholtz International Research School HI-SCORE(HIRS-0008)by the project“EFFCISⅡ”funded by the Federal Ministry for Economic Affairs and Climate Action(BMWK)under contract numbers 03EE1059B+9 种基金the Australian Renewable Energy Agency(ARENA)as part of ARENA’s Transformative Research Accelerating Commercialization(TRAC)Programthe Australian Research Council(ARC)Discovery Project(DP230102463)Linkage Project(LP200301593)Baosteel-Australia Joint Research and Development Center(BA19010)support from the Australian Center of Advanced Photovoltaics(ACAP)as a recipient of the ACAP Fel owship(RG172864-B)financial support of the Australian Research Council(ARC)Future Fel owship(FT190100756)funding from the European Union’s H2020 ERC-Consolidator program under grant agreement number no.866018(SENSATE)by the Science and Innovation Ministry of Spain projects number PID2023-148976OB-C41(CURIO-CITY)and PCI2023-145971-2(ACT-FAST,CET-Partnership 2023 program)the European Union’s Horizon research and innovation program under the Marie Skøodowska-Curie grant agreement no.10115148(LEK-PV)part of Maria de Maeztu Units of Excel ence Program CEX2023-001300-M/funded by MICIU/AEI/10.13039/501100011033
文摘The present work reports on microscopic analyses of recombination at grain boundaries(GBs)in polycrystalline Li-doped(Ag,Cu)_(2)ZnSn(S,Se)_(4)(LiACZTSSe)and Cu_(2)ZnSnS_(4)(CZTS)absorber layers in high-efficiency solar cells(conversion efficiencies of 14.4%and 10.8%).Recombination velocities sG B were determined at a large number of GBs by evaluating profiles extracted from cathodoluminescence intensity distributions across GBs in these polycrystalline layers.In both Li-ACZTSSe and CZTS absorber layers,the sG B values exhibited wide ranges over several orders of magnitude with a median values of 680 and 1100 cm s^(-1)for the Li-ACZTSSe and CZTS absorbers.
基金Sponsored by the Project of Sichuan Landscape and Recreation Research Center(JGYQ2020037).
文摘In this study,CiteSpace software is used to carry out visual analysis on the three-dimensional research literature on urban recreation space from the perspective of compact city theory in the past 20 years,exploring the scientific development trend and research hotspots in this field.The results show that the number of published documents shows a fluctuating upward trend,and the significant growth rate reflects the role of policy orientation in promoting the concept of compact city.The co-occurrence analysis of keywords reveals the research hotspots of“compact city”,“recreation space”and“urban park”,while the emergence of new keywords such as“vertical city”and“spatial justice”indicates the new trend of recent research.The cluster analysis and timeline map further show the evolution of research themes,with“compact city”being the largest cluster and having rich connections with other themes such as“urban design”and“urban park”.
基金Supported by the Zhejiang Medical Science and Technology Project,No.2022KY1325 and No.2023KY381Public Welfare Project of Jinhua Science and Technology Plan,No.2023-4-084Major Project of Jinhua Science and Technology Plan,No.2023-3-066.
文摘BACKGROUND Ganglioneuroma is a rare,well-differentiated,slow-growing benign tumor of the peripheral nerves,with surgical resection being the only curative treatment.Surgical resection of ganglioneuromas encasing major blood vessels remains a substantial clinical challenge.Traditionally,these cases often require open abdominal surgery or combined organ resections,and in some instances,the tumors are considered unresectable.Currently,no reports have described the resection of such tumors via laparoscopy.CASE SUMMARY A 35-year-old woman was admitted to our hospital after the incidental discovery of a retroperitoneal space-occupying lesion.Imaging revealed a mass with the celiac axis and superior mesenteric artery passing through it.A neurogenic tumor was suspected,with ganglioneuroma being the most likely diagnosis.Following comprehensive preoperative preparation,the retroperitoneal tumor was resected using a three-dimensional laparoscopy combined with an organ suspension technique.The surgical approach involved incising the tumor along the vascular axis and conducting meticulous,vascular-preserving tumor excision.The operation lasted approximately 458 minutes,with an estimated blood loss of 50 mL.The patient was discharged on the 8th postoperative day.A transient liver injury occurred after surgery but improved rapidly.After 11 months of postoperative follow-up,no complications or tumor recurrence were observed.CONCLUSION This case illustrates the feasibility of minimally invasive laparoscopic resection for retroperitoneal ganglioneuromas encasing major blood vessels.
基金supported by the National Natural Science Foundation of China to Jiping Huang(12035004 and 12320101004)the Innovation Program of the Shanghai Municipal Education Commission to Jiping Huang(2023ZKZD06)+2 种基金the National Natural Science Foundation of China to Ying Li(92163123 and 52250191)the Zhejiang Provincial Natural Science Foundation of China to Ying Li(LZ24A050002)the National Natural Science Foundation of China to Liujun Xu(12375040,12088101,and U2330401).
文摘Thermal metamaterial represents a groundbreaking approach to control heat conduction,and,as a crucial component,thermal invisibility is of utmost importance for heat management.Despite the flourishing development of thermal invisibility schemes,they still face two limitations in practical applications.First,objects are typically completely enclosed in traditional cloaks,making them difficult to use and unsuitable for objects with heat sources.Second,although some theoretical proposals have been put forth to change the thermal conductivity of materials to achieve dynamic invisibility,their designs are complex and rigid,making them unsuitable for large-scale use in real threedimensional(3D)spaces.Here,we propose a concept of a thermal dome to achieve 3D invisibility.Our scheme includes an open functional area,greatly enhancing its usability and applicability.It features a reconfigurable structure,constructed with simple isotropic natural materials,making it suitable for dynamic requirements.The performance of our reconfigurable thermal dome has been confirmed through simulations and experiments,consistent with the theory.The introduction of this concept can greatly advance the development of thermal invisibility technology from theory to engineering and provide inspiration for other physical domains,such as direct current electric fields and magnetic fields.
