A three-dimensional, first order turbulence closure, thermal diffusion model is described in this paper. The governing equations consist of an equation of continuity, three components of momentum, conservation equatio...A three-dimensional, first order turbulence closure, thermal diffusion model is described in this paper. The governing equations consist of an equation of continuity, three components of momentum, conservation equations for salt, temperature and subgridscale energy, and an equation of state. In the model, according to the hypothesis of Kolmogorov and Prandtl, the viscosity coefficient of turbulent flow of homogeneous fluid is related to the local turbulent energy, and the horizontal and vertical exchange coefficients of mass, heat and momentum are computed with the introduction of subgridscale turbulence energy. The governing equations are solved by finite difference techniques. This model is applied to the Jiaozhou bay to predict thermal pollution by the Huangdao power plant. An instantaneous tidal current field is computed, then the distribution of temperature increment is predicted, and finally the effect of wind stress on thermal discharge is discussed.展开更多
Aerodynamic evaluation under multi-condition is indispensable for the design of aircraft,and the requirement for mass data still means a high cost.To address this problem,we propose a novel point-cloud multi-condition...Aerodynamic evaluation under multi-condition is indispensable for the design of aircraft,and the requirement for mass data still means a high cost.To address this problem,we propose a novel point-cloud multi-condition aerodynamics transfer learning(PCMCA-TL)framework that enables aerodynamic prediction in data-scarce sce-narios by transferring knowledge from well-learned scenarios.We modified the PointNeXt segmentation archi-tecture to a PointNeXtReg+regression model,including a working condition input module.The model is first pre-trained on a public dataset with 2000 shapes but only one working condition and then fine-tuned on a multi-condition small-scale spaceplane dataset.The effectiveness of the PCMCA-TL framework is verified by comparing the pressure coefficients predicted by direct training,pre-training,and TL models.Furthermore,by comparing the aerodynamic force coefficients calculated by predicted pressure coefficients in seconds with the correspond-ing CFD results obtained in hours,the accuracy highlights the development potential of deep transfer learning in aerodynamic evaluation.展开更多
Effective isolation between the cement sheath and the sandstone is crucial for the development and production of oil and gas wells in sandstone formations.In this study,a cement-sandstone composite(CSC)was prepared,an...Effective isolation between the cement sheath and the sandstone is crucial for the development and production of oil and gas wells in sandstone formations.In this study,a cement-sandstone composite(CSC)was prepared,and based onμ-CT three-dimensional reconstruction imaging and finite element analysis(FEA)techniques,the stress distribution and potential failure mechanism at the cement-sandstone bonding interface under axial loading were analyzed.The key findings are as follows:(1)stress concentrations are highly likely to form at the gap between the cement and sandstone interface and around interfacial voids,with Von Mises stress reaching critical levels of 18.0-20.0 MPa at these locations,significantly exceeding the stress magnitudes in well-bonded regions;(2)the phenomenon of local stress concentration driven by interfacial defects can be identified as the main basis for predicting damage location in interfacial debonding and continuous shear under axial load;(3)ensuring tight cementation at the cement-sandstone interface and minimizing interfacial voids are paramount for preventing stress-induced failure;(4)the critical Von Mises stress value of 20 MPa at the interface defect can be used as a benchmark for material selection and designed to ensure long-term integrity in oil and gas well applications subjected to similar axial loads.These findings contribute to a more accurate understanding of the failure mechanism of the cement-sandstone interface and to the precise design of material properties,thereby ensuring the long-term integrity of oil and gas well applications subjected to similar axial loads.展开更多
Machine learning has rapidly become a powerful tool for addressing challenges in ultracold atomic systems;however,its application to intricate three-dimensional(3D)systems remains relatively underexplored.In this stud...Machine learning has rapidly become a powerful tool for addressing challenges in ultracold atomic systems;however,its application to intricate three-dimensional(3D)systems remains relatively underexplored.In this study,we introduce a3D residual network(3D Res Net)framework based on 3D convolutional neural networks(3D CNN)to predict ground states phases in 3D dipolar spinor Bose–Einstein condensates(BECs).Our results show that the 3D Res Net framework predicts ground states with high accuracy and efficiency across a broad parameter space.To enhance phase transition predictions,we incorporate data augmentation techniques,leading to a notable improvement in the model's performance.The method is further validated in more complex scenarios,particularly when transverse magnetic fields are introduced.Compared to conventional imaginary-time evolution methods(ITEM),the 3D Res Net drastically reduces computational costs,offering a rapid and scalable solution for complex 3D multi-parameter nonlinear systems.展开更多
The internal hotspot temperature rise prediction in nanocrystalline high-frequency transformers(nanoHFTs) is essential to ensure reliable operation. This paper presents a three-dimensional thermal network(3DTN) model ...The internal hotspot temperature rise prediction in nanocrystalline high-frequency transformers(nanoHFTs) is essential to ensure reliable operation. This paper presents a three-dimensional thermal network(3DTN) model for epoxy resin encapsulated nano HFTs, which aims to precisely predict the temperature distribution inside the transformer in combination with the finite element method(FEM). A magnetothermal bidirectional coupling 3DTN model is established by analyzing the thermal conduction between the core, windings, and epoxy resin, while also considering the convection and radiation heat transfer mechanisms on the surface of the epoxy resin. The model considers the impact of loss distribution in the core and windings on the temperature field and adopts a simplified 1/2 thermal network model to reduce computational complexity. Furthermore, the results of FEM are compared with experimental results to verify the accuracy of the 3DTN model in predicting the temperature rise of nano HFT. The results show that the 3DTN model reduces errors by an average of 5.25% over the traditional two-dimensional thermal network(2DTN) model, particularly for temperature distributions in the windings and core. This paper provides a temperature rise prediction method for the thermal design and offers a theoretical basis and engineering guidance for the optimization of their thermal management systems.展开更多
The development of digital twins for geotechnical structures necessitates the real-time updates of threedimensional(3D)virtual models(e.g.numerical finite element method(FEM)model)to accurately predict time-varying ge...The development of digital twins for geotechnical structures necessitates the real-time updates of threedimensional(3D)virtual models(e.g.numerical finite element method(FEM)model)to accurately predict time-varying geotechnical responses(e.g.consolidation settlement)in a 3D spatial domain.However,traditional 3D numerical model updating approaches are computationally prohibitive and therefore difficult to update the 3D responses in real time.To address these challenges,this study proposes a novel machine learning framework called sparse dictionary learning(T-3D-SDL)for real-time updating of time-varying 3D geotechnical responses.In T-3D-SDL,a concerned dataset(e.g.time-varying 3D settlement)is approximated as a linear superposition of dictionary atoms generated from 3D random FEM analyses.Field monitoring data are then used to identify non-trivial atoms and estimate their weights within a Bayesian framework for model updating and prediction.The proposed approach enables the real-time update of temporally varying settlements with a high 3D spatial resolution and quantified uncertainty as field monitoring data evolve.The proposed approach is illustrated using an embankment construction project.The results show that the proposed approach effectively improves settlement predictions along temporal and 3D spatial dimensions,with minimal latency(e.g.within minutes),as monitoring data appear.In addition,the proposed approach requires only a reasonably small number of 3D FEM model evaluations,avoids the use of widely adopted yet often criticized surrogate models,and effectively addresses the limitations(e.g.computational inefficiency)of existing 3D model updating approaches.展开更多
Predicting monsoon climate is one of the major endeavors in climate science and is becoming increasingly challenging due to global warming. The accuracy of monsoon seasonal predictions significantly impacts the lives ...Predicting monsoon climate is one of the major endeavors in climate science and is becoming increasingly challenging due to global warming. The accuracy of monsoon seasonal predictions significantly impacts the lives of billions who depend on or are affected by monsoons, as it is essential for the water cycle, food security, ecology, disaster prevention, and the economy of monsoon regions. Given the extensive literature on Asian monsoon climate prediction, we limit our focus to reviewing the seasonal prediction and predictability of the Asian Summer Monsoon (ASM). However, much of this review is also relevant to monsoon predictions in other seasons and regions. Over the past two decades, considerable progress has been made in the seasonal forecasting of the ASM, driven by an enhanced understanding of the sources of predictability and the dynamics of seasonal variability, along with advanced development in sophisticated models and technologies. This review centers on advances in understanding the physical foundation for monsoon climate prediction (section 2), significant findings and insights into the primary and regional sources of predictability arising from feedback processes among various climate components (sections 3 and 4), the effects of global warming and external forcings on predictability (section 5), developments in seasonal prediction models and techniques (section 6), the challenges and limitations of monsoon climate prediction (section 7), and emerging research trends with suggestions for future directions (section 8). We hope this review will stimulate creative activities to enhance monsoon climate prediction.展开更多
The objective of the current study is to investigate an adaptive predictive observer-based autopilot for a skid-to-turn(STT)missile model with uncertainties and unknown dynamic equations.A predictive control for the S...The objective of the current study is to investigate an adaptive predictive observer-based autopilot for a skid-to-turn(STT)missile model with uncertainties and unknown dynamic equations.A predictive control for the STT missile is designed based on nonlinear model predictive control(NMPC)using Taylor series expansion,after which,via a neural network(NN),unknown functions are approximated.The present study also evaluates an adaptive optimal observer of a new strategy-based nonlinear system.Specifically,to estimate the missile states such as normal acceleration and its derivatives for the future,originally the Taylor series states expansion was gained to any specified order,based on their receding horizons.To address the problem of prediction error,an analytic solution was prepared that led to a closed form regarding the nonlinear optimal observer.Out of the gains resulting from the analytic solution,as developed for the problem of prediction error,the selection of the proposed observer gain was optimally conducted to meet the stability condition.Thus,combining the adaptive predictive autopilot and the adaptive optimal observer scheme was implemented to secure the performance,which needed only estimated normal acceleration and its derivatives.Meanwhile,no angular velocity measurement or wind angle estimation was required.Ultimately,the proposed technique was found effective,as confirmed by the qualitative simulation results.展开更多
A complementary method to determine the vibration source intensity,defined as the weighted vertical acceleration level at the tunnel wall,is needed urgently when comparable measurements or database predictions are una...A complementary method to determine the vibration source intensity,defined as the weighted vertical acceleration level at the tunnel wall,is needed urgently when comparable measurements or database predictions are unavailable in empirical predictions.In this study,we present an analytical model designed to quickly and accurately estimate the vibration source intensity produced by moving metro trains,considering both regular and floating slab tracks.The improved periodic pipe-in-pipe(PiP)model with regular or floating slabs affixed to the tunnel invert was developed.The train loads are represented in the frequency-wavenumber domain to apply in the model.Measured track irregularities were applied and the proposed model was validated against the measured results and verified by a tunnel-soil coupled model.The proposed approach effectively and accurately assessed the vibration source intensity generated by underground trains in a prediction time of just 58 s.Track irregularities significantly affect the vibration source intensity,making them a key factor in comparable measurements or database predictions.A floating slab track can reduce the vibration source intensity by about 14 dB.The proposed approach can serve as an additional method to complement comparable measurements or database predictions for determining the vibration source intensity in empirical predictions.展开更多
Pinus radiata(D.Don)dominates New Zealand's forestry industry,constituting 91%of plantations,and is among the world's most important plantation species.Given the socio-economic and environmental importance of ...Pinus radiata(D.Don)dominates New Zealand's forestry industry,constituting 91%of plantations,and is among the world's most important plantation species.Given the socio-economic and environmental importance of this species,it is important to have accurate and precise projections over time to make efficient decisions for forest management and greenfield investments in afforestation projects,especially for permanent carbon forests.Future projections of any natural resource systems rely on modeling;however,the acceleration of climate change makes future projections of yield less certain.These challenges also impact national expectations of the contribution planted forests will provide to address climate change and meet international commitments under the Paris Agreement.Using a large national-scale set of contemporary ground-measured data(2013–2023),this study investigates the performance of two growth models developed over 30 years ago that are widely used by NZ plantation growers:1)the Pumice Plateau Model 1988(PPM88)and 2)the 300-index(including a model variant of regional drift).Model simulations were made using the FORECASTER modeling suite with geographic boundaries to adjust for drift in space and time.Basal area(BA,m^(2)⋅ha^(-1))and volume(m^(3)⋅ha^(-1))were simulated,and standard errors and goodness-of-fit metrics calculated up to a typical rotation age of 30 years.Model residuals were then separated and analysed for the main plantation growing regions.The models overpredicted observed growth by between 6.8%and 16.2%,but model predictions and errors varied significantly between regions.The results of this study provided clear evidence of divergence between the outputs of both models and the measured data.Finally,this study suggests future measures to address challenges posed by these discrepancies that will provide better information for forest management and investment decisions in a changing climate.展开更多
This study reveals the critical role of multiscale interaction within the westerly wind bursts(WWBs)west of the MJO convection in modulating the prediction skill for the November MJO event during the DYNAMO(Dynamics o...This study reveals the critical role of multiscale interaction within the westerly wind bursts(WWBs)west of the MJO convection in modulating the prediction skill for the November MJO event during the DYNAMO(Dynamics of the Madden–Julian Oscillation)field campaign.The characteristics of the MJO convection envelope are obtained by the largescale precipitation tracking method,and a novel metric is introduced to quantify the prediction skill for the MJO convection in the ECMWF reforecast.The ECMWF forecast exhibits approximately 17 days in skillful prediction for the MJO convection—significantly lower than that derived from the global measure.The reforecast ensembles are further classified into high and low skill catalogs based on the mean prediction skill during the observed WWBs period.High-skill ensembles exhibit significantly enhanced low-level westerlies,amplified MJO convection,and reduced spatial separation between the low-level westerlies and MJO convection during the WWBs period,indicating stronger coupling between the large-scale circulation and the convection.Mechanistic analysis reveals that enhanced westerlies in high-skill ensembles can transfer more high-frequency energy to the MJO convection through the flux convergence of interaction energy for MJO convection development,resulting in better prediction skill.展开更多
Thermal power plants are the main contributors to greenhouse gas emissions.The prediction of the emission supports the decision makers and environmental sustainability.The objective of this study is to enhance the acc...Thermal power plants are the main contributors to greenhouse gas emissions.The prediction of the emission supports the decision makers and environmental sustainability.The objective of this study is to enhance the accuracy of emission prediction models,supporting more effective real-time monitoring and enabling informed operational decisions that align with environmental compliance efforts.This paper presents a data-driven approach for the accurate prediction of gas emissions,specifically nitrogen oxides(NOx)and carbon monoxide(CO),in natural gas power plants using an optimized hybrid machine learning framework.The proposed model integrates a Feedforward Neural Network(FFNN)trained using Particle Swarm Optimization to capture the nonlinear emission dynamics under varying gas turbine operating conditions.To further enhance predictive performance,the K-Nearest Neighbor(K-NN)algorithm serves as a post-processing method to enhance IPSO-FFNN predictions through adjustment and refinement,improving overall prediction accuracy,while Neighbor Component Analysis is used to identify and rank the most influential operational variables.The study makes a significant contribution through the combination of NCA feature selection with PSO global optimization,FFNN nonlinear modelling,and K-NN error correction into one unified system,which delivers precise emission predictions.The model was developed and tested using a real-world dataset collected from gas-fired turbine operations,with validated results demonstrating robust accuracy,achieving Root Mean Square Error values of 0.355 for CO and 0.368 for NOx.When benchmarked against conventional models such as standard FFNN,Support Vector Regression,and Long Short-Term Memory networks,the hybrid model achieved substantial improvements,up to 97.8%in Mean Squared Error,95%in Mean Absolute Error(MAE),and 85.19%in RMSE for CO;and 97.16%in MSE,93.4%in MAE,and 83.15%in RMSE for NOx.These results underscore the model’s potential for improving emission prediction,thereby supporting enhanced operational efficiency and adherence to environmental standards.展开更多
The viscosity of refining slags plays a critical role in metallurgical processes.However,obtaining accurate viscosity data remains challenging due to the complexities of high-temperature experiments,often relying on e...The viscosity of refining slags plays a critical role in metallurgical processes.However,obtaining accurate viscosity data remains challenging due to the complexities of high-temperature experiments,often relying on empirical models with limited predictive capabilities.This study focuses on the influence of optical basicity on viscosity in CaO-Al_(2)O_(3)-based refining slags,leveraging machine learning to address data scarcity and improve prediction accuracy.An automated framework for algorithm integration,parameter tuning,and evaluation ranking framework(Auto-APE)is employed to develop customized data-driven models for various slag systems,including CaO-Al_(2)O_(3)-SiO_(2),CaO-Al_(2)O_(3)-CaF_(2),CaO-Al_(2)O_(3)-SiO_(2)-MgO,and CaO-Al_(2)O_(3)-SiO_(2)-MgO-CaF_(2).By incorporating optical basicity as a key feature,the models achieve an average validation error of 8.0%to 15.1%,significantly outperforming traditional empirical models.Additionally,symbolic regression is introduced to rapidly construct domain-specific features,such as optical basicity-like descriptors,offering a potential breakthrough in performance prediction for small datasets.This work highlights the critical role of domain-specific knowledge in understanding and predicting viscosity,providing a robust machine learning-based approach for optimizing refining slag properties.展开更多
Precise forecasts of wildfire danger are crucial for proactive fuel management and emergency responses,yet they pose a challenge at the subseasonal scale due to limitations in prediction capabilities and a gap between...Precise forecasts of wildfire danger are crucial for proactive fuel management and emergency responses,yet they pose a challenge at the subseasonal scale due to limitations in prediction capabilities and a gap between forecast outputs and the needs of decision-makers.This study introduces an innovative hybrid modeling framework that integrates artificial intelligence(AI)with climate dynamic prediction systems to accurately forecast High Fire-Danger Days(HFDDs)for the following month.These HFDDs are derived from historical satellite fire data and the optimum fire danger index,with a particular focus on Southwest China as a case study.The AI module,based on the ResNet-18 neural network model,integrates observational and physically constrained analysis to establish links between HFDDs and optimal predictors of atmospheric circulation from both the concurrent and preceding months.Leveraging climate dynamical forecasting,this hybrid model provides more reliable deterministic predictions for monthly HFDDs than conventional methods that rely solely on terrestrial variables such as precipitation.More importantly,the integration of dynamical ensemble prediction enhances the model’s capability for skillful probabilistic predictions of HFDDs,facilitating the creation of customized fire danger outlooks and emergency action maps tailored to stakeholders’needs.The model’s added economic value was also evaluated,demonstrating its potential to improve decision-making in disaster management and bridge the“last-mile gap”in climate service delivery.This work contributes to the Seamless Prediction and Services for Sustainable Natural and Built Environment(SEPRESS)Program(2025–32),under the United Nations Educational Scientific and Cultural Organization(UNESCO)International Decade of Sciences for Sustainable Development(2024–33).展开更多
Customer churn is the rate at which customers discontinue doing business with a company over a given time period.It is an essential measure for businesses to monitor high churn rates,as they often indicate underlying ...Customer churn is the rate at which customers discontinue doing business with a company over a given time period.It is an essential measure for businesses to monitor high churn rates,as they often indicate underlying issues with services,products,or customer experience,resulting in considerable income loss.Prediction of customer churn is a crucial task aimed at retaining customers and maintaining revenue growth.Traditional machine learning(ML)models often struggle to capture complex temporal dependencies in client behavior data.To address this,an optimized deep learning(DL)approach using a Regularized Bidirectional Long Short-Term Memory(RBiLSTM)model is proposed to mitigate overfitting and improve generalization error.The model integrates dropout,L2-regularization,and early stopping to enhance predictive accuracy while preventing over-reliance on specific patterns.Moreover,this study investigates the effect of optimization techniques on boosting the training efficiency of the developed model.Experimental results on a recent public customer churn dataset demonstrate that the trained model outperforms the traditional ML models and some other DL models,such as Long Short-Term Memory(LSTM)and Deep Neural Network(DNN),in churn prediction performance and stability.The proposed approach achieves 96.1%accuracy,compared with LSTM and DNN,which attain 94.5%and 94.1%accuracy,respectively.These results confirm that the proposed approach can be used as a valuable tool for businesses to identify at-risk consumers proactively and implement targeted retention strategies.展开更多
Objective:To investigate the impact of targeted nursing interventions based on frailty prediction models on peri-hospitalization clinical outcomes in middle-aged and elderly patients with upper gastrointestinal bleedi...Objective:To investigate the impact of targeted nursing interventions based on frailty prediction models on peri-hospitalization clinical outcomes in middle-aged and elderly patients with upper gastrointestinal bleeding(UGIB).Methods:A prospective cohort study was conducted,and 126 middle-aged and elderly patients with UGIB admitted from August 2024 to August 2025 were selected as the study subjects.The patients were divided into the intervention group(63 cases)and the control group(63 cases)based on whether they received nursing intervention based on frailty prediction models.The control group received routine care,while the intervention group,on the basis of routine care,used the FRAIL scale combined with laboratory indicators(albumin,hemoglobin,etc.)to establish a predictive model to evaluate patients within 24 hours of admission,and implemented multi-dimensional targeted nursing intervention for pre-frailty or frailty patients screened out.The incidence of frailty,rebleeding rate,average length of stay,hospitalization cost,and nursing satisfaction during hospitalization were compared between the two groups.Results:The incidence of frailty during hospitalization in the intervention group was 11.1%(7 cases/63 cases),significantly lower than 31.7%(20 cases/63 cases)in the control group,and the difference was statistically significant(p<0.05).The rebleeding rate of 4.8%vs 12.7%,the average length of stay of(7.2±1.5)days vs(9.1±2.2)days,and the average hospitalization cost of(23,000±6,000)yuan vs(28,000±7,000)yuan in the intervention group were all lower than those in the control group(all p<0.05).The nursing satisfaction score of the intervention group(93.5±4.2)points was higher than that of the control group(86.3±5.8)points(p<0.05).Conclusion:The frailty prediction model applied to the peri-hospitalization care of middle-aged and elderly patients with UGIB can effectively identify frailty risk.Through early targeted intervention,the incidence of frailty and rebleeding rate can be reduced,the length of hospital stay can be shortened,medical expenses can be reduced,and nursing satisfaction can be improved,which has clinical promotion value.展开更多
To achieve low-carbon regulation of electric vehicle(EV)charging loads under the“dual carbon”goals,this paper proposes a coordinated scheduling strategy that integrates dynamic carbon factor prediction and multiobje...To achieve low-carbon regulation of electric vehicle(EV)charging loads under the“dual carbon”goals,this paper proposes a coordinated scheduling strategy that integrates dynamic carbon factor prediction and multiobjective optimization.First,a dual-convolution enhanced improved Crossformer prediction model is constructed,which employs parallel 1×1 global and 3×3 local convolutionmodules(Integrated Convolution Block,ICB)formultiscale feature extraction,combinedwith anAdaptive Spectral Block(ASB)to enhance time-series fluctuationmodeling.Based on high-precision predictions,a carbon-electricity cost joint optimization model is further designed to balance economic,environmental,and grid-friendly objectives.The model’s superiority was validated through a case study using real-world data from a renewable-heavy grid.Simulation results show that the proposed multi-objective strategy demonstrated a superior balance compared to baseline and benchmark models,achieving a 15.8%reduction in carbon emissions and a 5.2%reduction in economic costs,while still providing a substantial 22.2%reduction in the peak-valley difference.Its balanced performance significantly outperformed both a single-objective strategy and a state-of-the-art Model Predictive Control(MPC)benchmark,highlighting the advantage of a global optimization approach.This study provides theoretical and technical pathways for dynamic carbon factor-driven EV charging optimization.展开更多
The Leafminers,representing a diverse group of insects from various genera within the Agromyzidae family,pose a significant threat to spinach(Spinacia oleracea L.)production.This study aimed to identify single nucleot...The Leafminers,representing a diverse group of insects from various genera within the Agromyzidae family,pose a significant threat to spinach(Spinacia oleracea L.)production.This study aimed to identify single nucleotide polymorphism(SNP)markers associated with leafminer resistance through a genome-wide association study(GWAS)and to evaluate the prediction accuracy(PA)for selecting resistant spinach using genomic prediction(GP).Using a dataset of 84301 SNPs obtained from whole-genome resequencing,seven GWAS models,including BLINK,FarmCPU,MLM,and MLMM in GAPIT 3,as well as MLM,GLM,and SMR in TASSEL 5,were employed to perform GWAS on a panel of 286 USDA spinach germplasm accessions.Three SNP markers,namely 1_115279256_C_T,3_157082529_C_T,and 4_168510908_T_G on chromosomes 1,3,and 4,respectively,were identified as associated with leafminer resistance.In the 30 kb flanking regions of these markers,four candidate genes(SOV1g031330,SOV1g031340,SOV4g047270,and SOV4g047280),encoding LOB domain-containing protein,KH domain-containing protein,were discovered.Nodulin-like domain-containing protein,and SAM domain-containing protein,were discovered.The PA for leafminer resistance selection was estimated using ten different SNP sets,including two GWAS-derived marker sets(three and 51 SNPs)and eight random marker sets(ranging from 51 to 10 K SNPs)analyzed by seven GP models.The findings emphasized the superior performance of GWAS-derived SNP sets,reaching a PA of up to 0.79 using the cBLUP model.Notably,this research marks the pioneering application of GP in the context of insect resistance,providing a significant advancement in the understanding and management of leafminer resistance in spinach cultivation.展开更多
According to the Mindlin plate theory and the first-order piston theory,this work obtains accurate closed-form eigensolutions for the flutter problem of three-dimensional(3D)rectangular laminated panels.The governing ...According to the Mindlin plate theory and the first-order piston theory,this work obtains accurate closed-form eigensolutions for the flutter problem of three-dimensional(3D)rectangular laminated panels.The governing differential equations are derived by the Hamilton's variational principle,and then solved by the iterative Separation-of-Variable(i SOV)method,which are applicable to arbitrary combinations of homogeneous Boundary Conditions(BCs).However,only the simply-support,clamped and cantilever panels are considered in this work for the sake of clarity.With the closed-form eigensolutions,the flutter frequency,flutter mode and flutter boundary are presented,and the effect of shear deformation and aerodynamic damping on flutter frequencies is investigated.Besides,the relation between panel energy and the work of aerodynamic load is discussed.The numerical comparisons reveal the following.(A)The flutter eigenvalues obtained by the present method are accurate,validated by the Finite Element Method(FEM)and the Galerkin method.(B)When the span-chord ratio is larger than 3,simplifying a 3D panel to 2D(two-dimensional)panel is reasonable and the relative differences of the flutter points predicted by the two models are less than one percent.(C)The reciprocal relationship between the mechanical energy of the panel and the work done by aerodynamic load is verified by using the present flutter eigenvalues and modes,further indicating the high accuracy of the present solutions.(D)The coupling of shear deformation and aerodynamic damping prevents frequency coalescing.展开更多
基金This project was financially supported by the National Committee of Science and Technology Grants/903-85-08-05
文摘A three-dimensional, first order turbulence closure, thermal diffusion model is described in this paper. The governing equations consist of an equation of continuity, three components of momentum, conservation equations for salt, temperature and subgridscale energy, and an equation of state. In the model, according to the hypothesis of Kolmogorov and Prandtl, the viscosity coefficient of turbulent flow of homogeneous fluid is related to the local turbulent energy, and the horizontal and vertical exchange coefficients of mass, heat and momentum are computed with the introduction of subgridscale turbulence energy. The governing equations are solved by finite difference techniques. This model is applied to the Jiaozhou bay to predict thermal pollution by the Huangdao power plant. An instantaneous tidal current field is computed, then the distribution of temperature increment is predicted, and finally the effect of wind stress on thermal discharge is discussed.
基金supported by the Natural Science Foundation of Hunan Province of China(Grant No.2021JJ10045).
文摘Aerodynamic evaluation under multi-condition is indispensable for the design of aircraft,and the requirement for mass data still means a high cost.To address this problem,we propose a novel point-cloud multi-condition aerodynamics transfer learning(PCMCA-TL)framework that enables aerodynamic prediction in data-scarce sce-narios by transferring knowledge from well-learned scenarios.We modified the PointNeXt segmentation archi-tecture to a PointNeXtReg+regression model,including a working condition input module.The model is first pre-trained on a public dataset with 2000 shapes but only one working condition and then fine-tuned on a multi-condition small-scale spaceplane dataset.The effectiveness of the PCMCA-TL framework is verified by comparing the pressure coefficients predicted by direct training,pre-training,and TL models.Furthermore,by comparing the aerodynamic force coefficients calculated by predicted pressure coefficients in seconds with the correspond-ing CFD results obtained in hours,the accuracy highlights the development potential of deep transfer learning in aerodynamic evaluation.
基金supported by the National Natural Science Foundation of China(No.52274026)the National Key Research and Development Program(No.2022YFC2806504)the CNOOC Research Project(No.KJGG-2022-17-04 and NO.KJGG-2022-17-05).
文摘Effective isolation between the cement sheath and the sandstone is crucial for the development and production of oil and gas wells in sandstone formations.In this study,a cement-sandstone composite(CSC)was prepared,and based onμ-CT three-dimensional reconstruction imaging and finite element analysis(FEA)techniques,the stress distribution and potential failure mechanism at the cement-sandstone bonding interface under axial loading were analyzed.The key findings are as follows:(1)stress concentrations are highly likely to form at the gap between the cement and sandstone interface and around interfacial voids,with Von Mises stress reaching critical levels of 18.0-20.0 MPa at these locations,significantly exceeding the stress magnitudes in well-bonded regions;(2)the phenomenon of local stress concentration driven by interfacial defects can be identified as the main basis for predicting damage location in interfacial debonding and continuous shear under axial load;(3)ensuring tight cementation at the cement-sandstone interface and minimizing interfacial voids are paramount for preventing stress-induced failure;(4)the critical Von Mises stress value of 20 MPa at the interface defect can be used as a benchmark for material selection and designed to ensure long-term integrity in oil and gas well applications subjected to similar axial loads.These findings contribute to a more accurate understanding of the failure mechanism of the cement-sandstone interface and to the precise design of material properties,thereby ensuring the long-term integrity of oil and gas well applications subjected to similar axial loads.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11904309 and 12305015)the Natural Science Foundation of Hunan Province,China(Grant No.2020JJ5528)the Natural Science Foundation of Hebei Province,China(Grant No.A2024205027)。
文摘Machine learning has rapidly become a powerful tool for addressing challenges in ultracold atomic systems;however,its application to intricate three-dimensional(3D)systems remains relatively underexplored.In this study,we introduce a3D residual network(3D Res Net)framework based on 3D convolutional neural networks(3D CNN)to predict ground states phases in 3D dipolar spinor Bose–Einstein condensates(BECs).Our results show that the 3D Res Net framework predicts ground states with high accuracy and efficiency across a broad parameter space.To enhance phase transition predictions,we incorporate data augmentation techniques,leading to a notable improvement in the model's performance.The method is further validated in more complex scenarios,particularly when transverse magnetic fields are introduced.Compared to conventional imaginary-time evolution methods(ITEM),the 3D Res Net drastically reduces computational costs,offering a rapid and scalable solution for complex 3D multi-parameter nonlinear systems.
基金supported by the Project of the National Key Research and Development Program of China under Grant 2022YFB2404100。
文摘The internal hotspot temperature rise prediction in nanocrystalline high-frequency transformers(nanoHFTs) is essential to ensure reliable operation. This paper presents a three-dimensional thermal network(3DTN) model for epoxy resin encapsulated nano HFTs, which aims to precisely predict the temperature distribution inside the transformer in combination with the finite element method(FEM). A magnetothermal bidirectional coupling 3DTN model is established by analyzing the thermal conduction between the core, windings, and epoxy resin, while also considering the convection and radiation heat transfer mechanisms on the surface of the epoxy resin. The model considers the impact of loss distribution in the core and windings on the temperature field and adopts a simplified 1/2 thermal network model to reduce computational complexity. Furthermore, the results of FEM are compared with experimental results to verify the accuracy of the 3DTN model in predicting the temperature rise of nano HFT. The results show that the 3DTN model reduces errors by an average of 5.25% over the traditional two-dimensional thermal network(2DTN) model, particularly for temperature distributions in the windings and core. This paper provides a temperature rise prediction method for the thermal design and offers a theoretical basis and engineering guidance for the optimization of their thermal management systems.
基金supported by a grant from the Research Grant Council of Hong Kong Special Administrative Region(Project No.11207724).
文摘The development of digital twins for geotechnical structures necessitates the real-time updates of threedimensional(3D)virtual models(e.g.numerical finite element method(FEM)model)to accurately predict time-varying geotechnical responses(e.g.consolidation settlement)in a 3D spatial domain.However,traditional 3D numerical model updating approaches are computationally prohibitive and therefore difficult to update the 3D responses in real time.To address these challenges,this study proposes a novel machine learning framework called sparse dictionary learning(T-3D-SDL)for real-time updating of time-varying 3D geotechnical responses.In T-3D-SDL,a concerned dataset(e.g.time-varying 3D settlement)is approximated as a linear superposition of dictionary atoms generated from 3D random FEM analyses.Field monitoring data are then used to identify non-trivial atoms and estimate their weights within a Bayesian framework for model updating and prediction.The proposed approach enables the real-time update of temporally varying settlements with a high 3D spatial resolution and quantified uncertainty as field monitoring data evolve.The proposed approach is illustrated using an embankment construction project.The results show that the proposed approach effectively improves settlement predictions along temporal and 3D spatial dimensions,with minimal latency(e.g.within minutes),as monitoring data appear.In addition,the proposed approach requires only a reasonably small number of 3D FEM model evaluations,avoids the use of widely adopted yet often criticized surrogate models,and effectively addresses the limitations(e.g.computational inefficiency)of existing 3D model updating approaches.
基金supported by the National Natural Science Foundation of China(Grant No.U2342208)support from NSF/Climate Dynamics Award#2025057。
文摘Predicting monsoon climate is one of the major endeavors in climate science and is becoming increasingly challenging due to global warming. The accuracy of monsoon seasonal predictions significantly impacts the lives of billions who depend on or are affected by monsoons, as it is essential for the water cycle, food security, ecology, disaster prevention, and the economy of monsoon regions. Given the extensive literature on Asian monsoon climate prediction, we limit our focus to reviewing the seasonal prediction and predictability of the Asian Summer Monsoon (ASM). However, much of this review is also relevant to monsoon predictions in other seasons and regions. Over the past two decades, considerable progress has been made in the seasonal forecasting of the ASM, driven by an enhanced understanding of the sources of predictability and the dynamics of seasonal variability, along with advanced development in sophisticated models and technologies. This review centers on advances in understanding the physical foundation for monsoon climate prediction (section 2), significant findings and insights into the primary and regional sources of predictability arising from feedback processes among various climate components (sections 3 and 4), the effects of global warming and external forcings on predictability (section 5), developments in seasonal prediction models and techniques (section 6), the challenges and limitations of monsoon climate prediction (section 7), and emerging research trends with suggestions for future directions (section 8). We hope this review will stimulate creative activities to enhance monsoon climate prediction.
文摘The objective of the current study is to investigate an adaptive predictive observer-based autopilot for a skid-to-turn(STT)missile model with uncertainties and unknown dynamic equations.A predictive control for the STT missile is designed based on nonlinear model predictive control(NMPC)using Taylor series expansion,after which,via a neural network(NN),unknown functions are approximated.The present study also evaluates an adaptive optimal observer of a new strategy-based nonlinear system.Specifically,to estimate the missile states such as normal acceleration and its derivatives for the future,originally the Taylor series states expansion was gained to any specified order,based on their receding horizons.To address the problem of prediction error,an analytic solution was prepared that led to a closed form regarding the nonlinear optimal observer.Out of the gains resulting from the analytic solution,as developed for the problem of prediction error,the selection of the proposed observer gain was optimally conducted to meet the stability condition.Thus,combining the adaptive predictive autopilot and the adaptive optimal observer scheme was implemented to secure the performance,which needed only estimated normal acceleration and its derivatives.Meanwhile,no angular velocity measurement or wind angle estimation was required.Ultimately,the proposed technique was found effective,as confirmed by the qualitative simulation results.
基金supported by the Natural Science Foundation of Shandong Province of China(No.ZR2024QE071).
文摘A complementary method to determine the vibration source intensity,defined as the weighted vertical acceleration level at the tunnel wall,is needed urgently when comparable measurements or database predictions are unavailable in empirical predictions.In this study,we present an analytical model designed to quickly and accurately estimate the vibration source intensity produced by moving metro trains,considering both regular and floating slab tracks.The improved periodic pipe-in-pipe(PiP)model with regular or floating slabs affixed to the tunnel invert was developed.The train loads are represented in the frequency-wavenumber domain to apply in the model.Measured track irregularities were applied and the proposed model was validated against the measured results and verified by a tunnel-soil coupled model.The proposed approach effectively and accurately assessed the vibration source intensity generated by underground trains in a prediction time of just 58 s.Track irregularities significantly affect the vibration source intensity,making them a key factor in comparable measurements or database predictions.A floating slab track can reduce the vibration source intensity by about 14 dB.The proposed approach can serve as an additional method to complement comparable measurements or database predictions for determining the vibration source intensity in empirical predictions.
基金funded by Scion's Strategic Science Investment Fund(SSIF)the Forest Growers Levy Trust(FGLT)through the Resilient Forests Programme(Task No.A89220)。
文摘Pinus radiata(D.Don)dominates New Zealand's forestry industry,constituting 91%of plantations,and is among the world's most important plantation species.Given the socio-economic and environmental importance of this species,it is important to have accurate and precise projections over time to make efficient decisions for forest management and greenfield investments in afforestation projects,especially for permanent carbon forests.Future projections of any natural resource systems rely on modeling;however,the acceleration of climate change makes future projections of yield less certain.These challenges also impact national expectations of the contribution planted forests will provide to address climate change and meet international commitments under the Paris Agreement.Using a large national-scale set of contemporary ground-measured data(2013–2023),this study investigates the performance of two growth models developed over 30 years ago that are widely used by NZ plantation growers:1)the Pumice Plateau Model 1988(PPM88)and 2)the 300-index(including a model variant of regional drift).Model simulations were made using the FORECASTER modeling suite with geographic boundaries to adjust for drift in space and time.Basal area(BA,m^(2)⋅ha^(-1))and volume(m^(3)⋅ha^(-1))were simulated,and standard errors and goodness-of-fit metrics calculated up to a typical rotation age of 30 years.Model residuals were then separated and analysed for the main plantation growing regions.The models overpredicted observed growth by between 6.8%and 16.2%,but model predictions and errors varied significantly between regions.The results of this study provided clear evidence of divergence between the outputs of both models and the measured data.Finally,this study suggests future measures to address challenges posed by these discrepancies that will provide better information for forest management and investment decisions in a changing climate.
基金sponsored by the National Natural Science Foundation of China(Grant Nos.U2442206,42205067,and 41922035)the National Key R&D Program of China(Grant No.2024YFC3013100)the Key Research Program of Frontier Sciences of CAS(Grant No.QYZDB-SSW-DQC017).
文摘This study reveals the critical role of multiscale interaction within the westerly wind bursts(WWBs)west of the MJO convection in modulating the prediction skill for the November MJO event during the DYNAMO(Dynamics of the Madden–Julian Oscillation)field campaign.The characteristics of the MJO convection envelope are obtained by the largescale precipitation tracking method,and a novel metric is introduced to quantify the prediction skill for the MJO convection in the ECMWF reforecast.The ECMWF forecast exhibits approximately 17 days in skillful prediction for the MJO convection—significantly lower than that derived from the global measure.The reforecast ensembles are further classified into high and low skill catalogs based on the mean prediction skill during the observed WWBs period.High-skill ensembles exhibit significantly enhanced low-level westerlies,amplified MJO convection,and reduced spatial separation between the low-level westerlies and MJO convection during the WWBs period,indicating stronger coupling between the large-scale circulation and the convection.Mechanistic analysis reveals that enhanced westerlies in high-skill ensembles can transfer more high-frequency energy to the MJO convection through the flux convergence of interaction energy for MJO convection development,resulting in better prediction skill.
文摘Thermal power plants are the main contributors to greenhouse gas emissions.The prediction of the emission supports the decision makers and environmental sustainability.The objective of this study is to enhance the accuracy of emission prediction models,supporting more effective real-time monitoring and enabling informed operational decisions that align with environmental compliance efforts.This paper presents a data-driven approach for the accurate prediction of gas emissions,specifically nitrogen oxides(NOx)and carbon monoxide(CO),in natural gas power plants using an optimized hybrid machine learning framework.The proposed model integrates a Feedforward Neural Network(FFNN)trained using Particle Swarm Optimization to capture the nonlinear emission dynamics under varying gas turbine operating conditions.To further enhance predictive performance,the K-Nearest Neighbor(K-NN)algorithm serves as a post-processing method to enhance IPSO-FFNN predictions through adjustment and refinement,improving overall prediction accuracy,while Neighbor Component Analysis is used to identify and rank the most influential operational variables.The study makes a significant contribution through the combination of NCA feature selection with PSO global optimization,FFNN nonlinear modelling,and K-NN error correction into one unified system,which delivers precise emission predictions.The model was developed and tested using a real-world dataset collected from gas-fired turbine operations,with validated results demonstrating robust accuracy,achieving Root Mean Square Error values of 0.355 for CO and 0.368 for NOx.When benchmarked against conventional models such as standard FFNN,Support Vector Regression,and Long Short-Term Memory networks,the hybrid model achieved substantial improvements,up to 97.8%in Mean Squared Error,95%in Mean Absolute Error(MAE),and 85.19%in RMSE for CO;and 97.16%in MSE,93.4%in MAE,and 83.15%in RMSE for NOx.These results underscore the model’s potential for improving emission prediction,thereby supporting enhanced operational efficiency and adherence to environmental standards.
基金supported by the National Key Research and Development Program of China(No.2023YFB3712401),the National Natural Science Foundation of China(No.52274301)the Aeronautical Science Foundation of China(No.2023Z0530S6005)the Ningbo Yongjiang Talent-Introduction Programme(No.2022A-023-C).
文摘The viscosity of refining slags plays a critical role in metallurgical processes.However,obtaining accurate viscosity data remains challenging due to the complexities of high-temperature experiments,often relying on empirical models with limited predictive capabilities.This study focuses on the influence of optical basicity on viscosity in CaO-Al_(2)O_(3)-based refining slags,leveraging machine learning to address data scarcity and improve prediction accuracy.An automated framework for algorithm integration,parameter tuning,and evaluation ranking framework(Auto-APE)is employed to develop customized data-driven models for various slag systems,including CaO-Al_(2)O_(3)-SiO_(2),CaO-Al_(2)O_(3)-CaF_(2),CaO-Al_(2)O_(3)-SiO_(2)-MgO,and CaO-Al_(2)O_(3)-SiO_(2)-MgO-CaF_(2).By incorporating optical basicity as a key feature,the models achieve an average validation error of 8.0%to 15.1%,significantly outperforming traditional empirical models.Additionally,symbolic regression is introduced to rapidly construct domain-specific features,such as optical basicity-like descriptors,offering a potential breakthrough in performance prediction for small datasets.This work highlights the critical role of domain-specific knowledge in understanding and predicting viscosity,providing a robust machine learning-based approach for optimizing refining slag properties.
基金J.YANG was supported by funding from the National Natural Science Foundation of China(Grant Nos.42475022,42261144671)the National Key R&D Program of China(Project No.2024YFC3013100)+2 种基金the Fundamental Research Funds for the Central UniversitiesM.LU was supported by the Otto Poon Centre of Climate Resilience and Sustainability at HKUST and the Hong Kong Research Grant Committee(Project No.16300424)Data processing and storage were supported by the National Key Scientific and Technological Infrastructure project“Earth System Numerical Simulation Facility”(EarthLab).
文摘Precise forecasts of wildfire danger are crucial for proactive fuel management and emergency responses,yet they pose a challenge at the subseasonal scale due to limitations in prediction capabilities and a gap between forecast outputs and the needs of decision-makers.This study introduces an innovative hybrid modeling framework that integrates artificial intelligence(AI)with climate dynamic prediction systems to accurately forecast High Fire-Danger Days(HFDDs)for the following month.These HFDDs are derived from historical satellite fire data and the optimum fire danger index,with a particular focus on Southwest China as a case study.The AI module,based on the ResNet-18 neural network model,integrates observational and physically constrained analysis to establish links between HFDDs and optimal predictors of atmospheric circulation from both the concurrent and preceding months.Leveraging climate dynamical forecasting,this hybrid model provides more reliable deterministic predictions for monthly HFDDs than conventional methods that rely solely on terrestrial variables such as precipitation.More importantly,the integration of dynamical ensemble prediction enhances the model’s capability for skillful probabilistic predictions of HFDDs,facilitating the creation of customized fire danger outlooks and emergency action maps tailored to stakeholders’needs.The model’s added economic value was also evaluated,demonstrating its potential to improve decision-making in disaster management and bridge the“last-mile gap”in climate service delivery.This work contributes to the Seamless Prediction and Services for Sustainable Natural and Built Environment(SEPRESS)Program(2025–32),under the United Nations Educational Scientific and Cultural Organization(UNESCO)International Decade of Sciences for Sustainable Development(2024–33).
文摘Customer churn is the rate at which customers discontinue doing business with a company over a given time period.It is an essential measure for businesses to monitor high churn rates,as they often indicate underlying issues with services,products,or customer experience,resulting in considerable income loss.Prediction of customer churn is a crucial task aimed at retaining customers and maintaining revenue growth.Traditional machine learning(ML)models often struggle to capture complex temporal dependencies in client behavior data.To address this,an optimized deep learning(DL)approach using a Regularized Bidirectional Long Short-Term Memory(RBiLSTM)model is proposed to mitigate overfitting and improve generalization error.The model integrates dropout,L2-regularization,and early stopping to enhance predictive accuracy while preventing over-reliance on specific patterns.Moreover,this study investigates the effect of optimization techniques on boosting the training efficiency of the developed model.Experimental results on a recent public customer churn dataset demonstrate that the trained model outperforms the traditional ML models and some other DL models,such as Long Short-Term Memory(LSTM)and Deep Neural Network(DNN),in churn prediction performance and stability.The proposed approach achieves 96.1%accuracy,compared with LSTM and DNN,which attain 94.5%and 94.1%accuracy,respectively.These results confirm that the proposed approach can be used as a valuable tool for businesses to identify at-risk consumers proactively and implement targeted retention strategies.
基金Construction and Application of Frailty Trajectory Prediction Model for Middle-aged and Elderly Patients with Upper Gastrointestinal Bleeding,Project Source:Sichuan Vocational College of Nursing(Project No.:2024ZRY25)。
文摘Objective:To investigate the impact of targeted nursing interventions based on frailty prediction models on peri-hospitalization clinical outcomes in middle-aged and elderly patients with upper gastrointestinal bleeding(UGIB).Methods:A prospective cohort study was conducted,and 126 middle-aged and elderly patients with UGIB admitted from August 2024 to August 2025 were selected as the study subjects.The patients were divided into the intervention group(63 cases)and the control group(63 cases)based on whether they received nursing intervention based on frailty prediction models.The control group received routine care,while the intervention group,on the basis of routine care,used the FRAIL scale combined with laboratory indicators(albumin,hemoglobin,etc.)to establish a predictive model to evaluate patients within 24 hours of admission,and implemented multi-dimensional targeted nursing intervention for pre-frailty or frailty patients screened out.The incidence of frailty,rebleeding rate,average length of stay,hospitalization cost,and nursing satisfaction during hospitalization were compared between the two groups.Results:The incidence of frailty during hospitalization in the intervention group was 11.1%(7 cases/63 cases),significantly lower than 31.7%(20 cases/63 cases)in the control group,and the difference was statistically significant(p<0.05).The rebleeding rate of 4.8%vs 12.7%,the average length of stay of(7.2±1.5)days vs(9.1±2.2)days,and the average hospitalization cost of(23,000±6,000)yuan vs(28,000±7,000)yuan in the intervention group were all lower than those in the control group(all p<0.05).The nursing satisfaction score of the intervention group(93.5±4.2)points was higher than that of the control group(86.3±5.8)points(p<0.05).Conclusion:The frailty prediction model applied to the peri-hospitalization care of middle-aged and elderly patients with UGIB can effectively identify frailty risk.Through early targeted intervention,the incidence of frailty and rebleeding rate can be reduced,the length of hospital stay can be shortened,medical expenses can be reduced,and nursing satisfaction can be improved,which has clinical promotion value.
基金Supported by State Grid Corporation of China Science and Technology Project:Research on Key Technologies for Intelligent Carbon Metrology in Vehicle-to-Grid Interaction(Project Number:B3018524000Q).
文摘To achieve low-carbon regulation of electric vehicle(EV)charging loads under the“dual carbon”goals,this paper proposes a coordinated scheduling strategy that integrates dynamic carbon factor prediction and multiobjective optimization.First,a dual-convolution enhanced improved Crossformer prediction model is constructed,which employs parallel 1×1 global and 3×3 local convolutionmodules(Integrated Convolution Block,ICB)formultiscale feature extraction,combinedwith anAdaptive Spectral Block(ASB)to enhance time-series fluctuationmodeling.Based on high-precision predictions,a carbon-electricity cost joint optimization model is further designed to balance economic,environmental,and grid-friendly objectives.The model’s superiority was validated through a case study using real-world data from a renewable-heavy grid.Simulation results show that the proposed multi-objective strategy demonstrated a superior balance compared to baseline and benchmark models,achieving a 15.8%reduction in carbon emissions and a 5.2%reduction in economic costs,while still providing a substantial 22.2%reduction in the peak-valley difference.Its balanced performance significantly outperformed both a single-objective strategy and a state-of-the-art Model Predictive Control(MPC)benchmark,highlighting the advantage of a global optimization approach.This study provides theoretical and technical pathways for dynamic carbon factor-driven EV charging optimization.
基金supported by USDA-SCRI(Grant Nos.2017-51181-26830 and 2023-51181-41321)USDA-AMS SCMP(Grant No.16SCCMAR0001)+1 种基金Arkansas Department of Agriculture SCBGP(Grant No.AM22SCBGPAR1130-00)USDA NIFA Hatch project ARK0VG2018 and ARK02440.
文摘The Leafminers,representing a diverse group of insects from various genera within the Agromyzidae family,pose a significant threat to spinach(Spinacia oleracea L.)production.This study aimed to identify single nucleotide polymorphism(SNP)markers associated with leafminer resistance through a genome-wide association study(GWAS)and to evaluate the prediction accuracy(PA)for selecting resistant spinach using genomic prediction(GP).Using a dataset of 84301 SNPs obtained from whole-genome resequencing,seven GWAS models,including BLINK,FarmCPU,MLM,and MLMM in GAPIT 3,as well as MLM,GLM,and SMR in TASSEL 5,were employed to perform GWAS on a panel of 286 USDA spinach germplasm accessions.Three SNP markers,namely 1_115279256_C_T,3_157082529_C_T,and 4_168510908_T_G on chromosomes 1,3,and 4,respectively,were identified as associated with leafminer resistance.In the 30 kb flanking regions of these markers,four candidate genes(SOV1g031330,SOV1g031340,SOV4g047270,and SOV4g047280),encoding LOB domain-containing protein,KH domain-containing protein,were discovered.Nodulin-like domain-containing protein,and SAM domain-containing protein,were discovered.The PA for leafminer resistance selection was estimated using ten different SNP sets,including two GWAS-derived marker sets(three and 51 SNPs)and eight random marker sets(ranging from 51 to 10 K SNPs)analyzed by seven GP models.The findings emphasized the superior performance of GWAS-derived SNP sets,reaching a PA of up to 0.79 using the cBLUP model.Notably,this research marks the pioneering application of GP in the context of insect resistance,providing a significant advancement in the understanding and management of leafminer resistance in spinach cultivation.
基金support of the National Natural Science Foundation of China(No.12172023)。
文摘According to the Mindlin plate theory and the first-order piston theory,this work obtains accurate closed-form eigensolutions for the flutter problem of three-dimensional(3D)rectangular laminated panels.The governing differential equations are derived by the Hamilton's variational principle,and then solved by the iterative Separation-of-Variable(i SOV)method,which are applicable to arbitrary combinations of homogeneous Boundary Conditions(BCs).However,only the simply-support,clamped and cantilever panels are considered in this work for the sake of clarity.With the closed-form eigensolutions,the flutter frequency,flutter mode and flutter boundary are presented,and the effect of shear deformation and aerodynamic damping on flutter frequencies is investigated.Besides,the relation between panel energy and the work of aerodynamic load is discussed.The numerical comparisons reveal the following.(A)The flutter eigenvalues obtained by the present method are accurate,validated by the Finite Element Method(FEM)and the Galerkin method.(B)When the span-chord ratio is larger than 3,simplifying a 3D panel to 2D(two-dimensional)panel is reasonable and the relative differences of the flutter points predicted by the two models are less than one percent.(C)The reciprocal relationship between the mechanical energy of the panel and the work done by aerodynamic load is verified by using the present flutter eigenvalues and modes,further indicating the high accuracy of the present solutions.(D)The coupling of shear deformation and aerodynamic damping prevents frequency coalescing.
