The present study provides a three-dimensional volume-of-fluid method based on the adaptive mesh refinement technique.The projection method on the adaptive mesh is introduced for solving the incompressible Navier-Stok...The present study provides a three-dimensional volume-of-fluid method based on the adaptive mesh refinement technique.The projection method on the adaptive mesh is introduced for solving the incompressible Navier-Stokes equations.The octree structure mesh is employed to solve the flow velocities and the pressure.The developed solver is applied to simulate the deformation of the cubic droplet driven by the surface tension without the effect of the gravity.The numerical results well predict the shape evolution of the droplet.展开更多
This paper proposes a state-of-the-art three-dimensional Voronoi cell finite element method(3D VCFEM)aimed at investigating the mechanical properties of particle-reinforced composites(PRCs)in space under different mic...This paper proposes a state-of-the-art three-dimensional Voronoi cell finite element method(3D VCFEM)aimed at investigating the mechanical properties of particle-reinforced composites(PRCs)in space under different microstructural properties.Firstly,the modified residual energy generalized function of 3D VCFEM was proposed by applying the hybrid stress element method,and the element format of the 3D Voronoi element was constructed.On this basis,the interaction between the matrix and the inclusions was considered,and the higher-order stress function including the interaction stress term was constructed.Secondly,to solve the difficulty of integrating easily due to the complexity and irregularity of the integration region in space,Delaunay tetrahedra were introduced within the 3D Voronoi element for mesh refinement.It simplified the integration process.Finally,to verify the accuracy and efficiency of the 3D VCFEM model,comparative models of 3D VCFENM and FEM were established for analysis and discussion.The stress field and strain field were compared and analyzed for the first time.An example was also given for the presence of a large number of randomly distributed inclusion particles.The results showed that under the same accuracy,3D VCFEM had the advantages of convenient mesh delineation and high computational efficiency compared with FEM,which provided a new way of thinking to analyze the actual PCRs.展开更多
The phase field model can coherently address the relatively complex fracture phenomenon,such as crack nucleation,branching,deflection,etc.The model has been extensively implemented in the finite element package Abaqus...The phase field model can coherently address the relatively complex fracture phenomenon,such as crack nucleation,branching,deflection,etc.The model has been extensively implemented in the finite element package Abaqus to solve brittle fracture problems in recent studies.However,accurate numerical analysis typically requires fine meshes to model the evolving crack path effectively.A broad region must be discretized without prior knowledge of the crack path,further augmenting the computational expenses.In this proposed work,we present an automated framework utilizing a posteriori error-indicator(MISESERI)to demarcate and sufficiently refine the mesh along the anticipated crack path.This eliminates the need for manual mesh refinement based on previous experimental/computational results or heuristic judgment.The proposed Python-based framework integrates the preanalysis,sufficient mesh refinement,and subsequent phase-field model-based numerical analysis with user-defined subroutines in a single streamlined pass.The novelty of the proposed work lies in integrating Abaqus’s native error estimation and mesh refinement capability,tailored explicitly for phase-field simulations.The proposed methodology aims to reduce the computational resource requirement,thereby enhancing the efficiency of the phase-field simulations while preserving the solution accuracy,making the framework particularly advantageous for complex fracture problems where the computational/experimental results are limited or unavailable.Several benchmark numerical problems are solved to showcase the effectiveness and accuracy of the proposed approach.The numerical examples present the proposed approach’s efficacy in the case of a complex mixed-mode fracture problem.The results show significant reductions in computational resources compared to traditional phase-field methods,which is promising.展开更多
To deal with the problem of low computational precision at the nodes near the source and satisfy the requirements for computational efficiency in inversion imaging and finite-element numerical simulations of the direc...To deal with the problem of low computational precision at the nodes near the source and satisfy the requirements for computational efficiency in inversion imaging and finite-element numerical simulations of the direct current method, we propose a new mesh refinement and recoarsement method for a two-dimensional point source. We introduce the mesh refinement and mesh recoarsement into the traditional structured mesh subdivision. By refining the horizontal grids, the singularity owing to the point source is minimized and the topography is simulated. By recoarsening the horizontal grids, the number of grid cells is reduced significantly and computational efficiency is improved. Model tests show that the proposed method solves the singularity problem and reduces the number of grid cells by 80% compared to the uniform grid refinement.展开更多
Three-dimensional forward modeling magnetotellurics （MT） problems. We present a is a challenge for geometrically complex new edge-based finite-element algorithm using an unstructured mesh for accurately and efficien...Three-dimensional forward modeling magnetotellurics （MT） problems. We present a is a challenge for geometrically complex new edge-based finite-element algorithm using an unstructured mesh for accurately and efficiently simulating 3D MT responses. The electric field curl-curl equation in the frequency domain was used to deduce the H （curl） variation weak form of the MT forward problem, the Galerkin rule was used to derive a linear finite-element equation on the linear-edge tetrahedroid space, and, finally, a BI-CGSTAB solver was used to estimate the unknown electric fields. A local mesh refinement technique in the neighbor of the measuring MT stations was used to greatly improve the accuracies of the numerical solutions. Four synthetic models validated the powerful performance of our algorithms. We believe that our method will effectively contribute to processing more complex MT studies.展开更多
Local mesh refinement is one of the key steps in the implementations of adaptive finite element methods. This paper presents a parallel algorithm for distributed memory parallel computers for adaptive local refinement...Local mesh refinement is one of the key steps in the implementations of adaptive finite element methods. This paper presents a parallel algorithm for distributed memory parallel computers for adaptive local refinement of tetrahedral meshes using bisection. This algorithm is used in PHG, Parallel Hierarchical Grid Chttp：//lsec. cc. ac. cn/phg/）, a toolbox under active development for parallel adaptive finite element solutions of partial differential equations. The algorithm proposed is characterized by allowing simukaneous refinement of submeshes to arbitrary levels before synchronization between submeshes and without the need of a central coordinator process for managing new vertices. Using the concept of canonical refinement, a simple proof of the independence of the resulting mesh on the mesh partitioning is given, which is useful in better understanding the behaviour of the biseetioning refinement procedure.展开更多
In the present paper, high-order finite volume schemes on unstructured grids developed in our previous papers are extended to solve three-dimensional inviscid and viscous flows. The highorder variational reconstructio...In the present paper, high-order finite volume schemes on unstructured grids developed in our previous papers are extended to solve three-dimensional inviscid and viscous flows. The highorder variational reconstruction technique in terms of compact stencil is improved to reduce local condition numbers. To further improve the efficiency of computation, the adaptive mesh refinement technique is implemented in the framework of high-order finite volume methods. Mesh refinement and coarsening criteria are chosen to be the indicators for certain flow structures. One important challenge of the adaptive mesh refinement technique on unstructured grids is the dynamic load balancing in parallel computation. To solve this problem, the open-source library p4 est based on the forest of octrees is adopted. Several two-and three-dimensional test cases are computed to verify the accuracy and robustness of the proposed numerical schemes.展开更多
In electrical impedance tomography （EIT）, distribution of the internal resistivity or conductivity of an unknown object is esti- mated using measured boundary voltage data induced by different current patterns with ...In electrical impedance tomography （EIT）, distribution of the internal resistivity or conductivity of an unknown object is esti- mated using measured boundary voltage data induced by different current patterns with various reconstruction algorithms. The reconstruction algorithms usually employ the Newton-Raphson iteration scheme to visualize the resistivity distribution inside the object. Accuracy of the imaging process depends not only on the algorithm used, but also on the scheme of finite element discretization. In this paper an adaptive mesh refinement is used in a modified reconstruction algorithm for the regularized Err. The method has a major impact on efficient solution of the forward problem as well as on achieving improved image resolution. Computer simulations indicate that the Newton-Raphson reconstruction algorithm for Err using adaptive mesh refinement performs better than the classical Newton-Raphson algorithm in terms of reconstructed image resolution.展开更多
In order to study the behavior and interconnection of network devices,graphs structures are used to formulate the properties in terms of mathematical models.Mesh network(meshnet)is a LAN topology in which devices are ...In order to study the behavior and interconnection of network devices,graphs structures are used to formulate the properties in terms of mathematical models.Mesh network(meshnet)is a LAN topology in which devices are connected either directly or through some intermediate devices.These terminating and intermediate devices are considered as vertices of graph whereas wired or wireless connections among these devices are shown as edges of graph.Topological indices are used to reflect structural property of graphs in form of one real number.This structural invariant has revolutionized the field of chemistry to identify molecular descriptors of chemical compounds.These indices are extensively used for establishing relationships between the structure of nanotubes and their physico-chemical properties.In this paper a representation of sodium chloride(NaCl)is studied,because structure of NaCl is same as the Cartesian product of three paths of length exactly like a mesh network.In this way the general formula obtained in this paper can be used in chemistry as well as for any degree-based topological polynomials of three-dimensional mesh networks.展开更多
A new method for estimating the posterior error of linear triangular element is presented. According to the specified accuracy, the element size and node spacing function of adaptive h-version mesh refinement are pred...A new method for estimating the posterior error of linear triangular element is presented. According to the specified accuracy, the element size and node spacing function of adaptive h-version mesh refinement are predicted. The main domain is divided by the isolines of node spacing into subregions in which mesh regeneration is realized. This remeshing refinement process implements mesh subdivision and mesh de-refinement in onecycle.展开更多
In this study,a numerical model for simulating two-phase flow is developed.The Cartesian grid with Adaptive Mesh Refinement(AMR)is adopted to reduce the computational cost.An explicit projection method is used for the...In this study,a numerical model for simulating two-phase flow is developed.The Cartesian grid with Adaptive Mesh Refinement(AMR)is adopted to reduce the computational cost.An explicit projection method is used for the time integration and the Finite Difference Method(FDM)is applied on a staggered grid for the discretization of spatial derivatives.The Volume of Fluid(VOF)method with Piecewise-Linear Interface Calculation(PLIC)is extended to the AMR grid to capture the gas-water interface accurately.A coarse-fine interface treatment method is developed to preserve the flux conservation at the interfaces.Several two-dimensional(2D)and three-dimensional(3D)benchmark cases are carried out for the validation of the model.2D and 3D shear flow tests are conducted to validate the extension of the VOF method to the AMR grid.A 2D linear sloshing case is considered in which the model is proved to have 2nd-order accuracy in space.The efficiency of applying the AMR grid is discussed with a nonlinear sloshing problem.Finally,2D solitary wave past stage and 2D/3D dam break are simulated to demonstrate that the model is able to simulate violent interface problems.展开更多
Based on the characteristics of 3D bulk forming process, the arbitrary Lagrangian-Eulerian (ALE) formulation-based FEM is studied, and a prediction-correction ALE-based FEM is proposed which integrates the advantages ...Based on the characteristics of 3D bulk forming process, the arbitrary Lagrangian-Eulerian (ALE) formulation-based FEM is studied, and a prediction-correction ALE-based FEM is proposed which integrates the advantages of precisely predicting the boundary configuration of the deformed material, and of efficiently avoiding hexahedron remeshing processes. The key idea of the prediction-correction ALE FEM is elaborated in detail. Accordingly, the strategy of mesh quality control, one of the key enabling techniques for the 3D bulk forming process numerical simulation by the prediction-correction ALE FEM is carefully investigated, and the algorithm for hexahedral element refinement is formulated based on the mesh distortion energy.展开更多
The spatial distribution of discontinuities and the size of rock blocks are the key indicators for rock mass quality evaluation and rockfall risk assessment.Traditional manual measurement is often dangerous or unreach...The spatial distribution of discontinuities and the size of rock blocks are the key indicators for rock mass quality evaluation and rockfall risk assessment.Traditional manual measurement is often dangerous or unreachable at some high-steep rock slopes.In contrast,unmanned aerial vehicle(UAV)photogrammetry is not limited by terrain conditions,and can efficiently collect high-precision three-dimensional(3D)point clouds of rock masses through all-round and multiangle photography for rock mass characterization.In this paper,a new method based on a 3D point cloud is proposed for discontinuity identification and refined rock block modeling.The method is based on four steps:(1)Establish a point cloud spatial topology,and calculate the point cloud normal vector and average point spacing based on several machine learning algorithms;(2)Extract discontinuities using the density-based spatial clustering of applications with noise(DBSCAN)algorithm and fit the discontinuity plane by combining principal component analysis(PCA)with the natural breaks(NB)method;(3)Propose a method of inserting points in the line segment to generate an embedded discontinuity point cloud;and(4)Adopt a Poisson reconstruction method for refined rock block modeling.The proposed method was applied to an outcrop of an ultrahigh steep rock slope and compared with the results of previous studies and manual surveys.The results show that the method can eliminate the influence of discontinuity undulations on the orientation measurement and describe the local concave-convex characteristics on the modeling of rock blocks.The calculation results are accurate and reliable,which can meet the practical requirements of engineering.展开更多
The contact characteristics of the rough tooth surface during the meshing process are significantly affected by the lubrication state.The coupling effect of tooth surface roughness and lubrication on meshing character...The contact characteristics of the rough tooth surface during the meshing process are significantly affected by the lubrication state.The coupling effect of tooth surface roughness and lubrication on meshing characteristics of planetary gear is studied.An improved three-dimensional(3 D)anisotropic tooth surface roughness fractal model is proposed based on the experimental parameters.Considering asperity contact and elastohydrodynamic lubrication(EHL),the contact load and flexibility deformation of the tooth surface are derived,and the deformation compatibility equation of the 3 D loaded tooth contact analysis(3 D-LTCA)method is improved.The asperity of the tooth surface changes the system from EHL to mixed lubrication and reduces the stiffness of the oil film.Compared with the sun planet gear,the asperity has a greater effect on the meshing characteristics of the ring-planet gear.Compared with the proposed method,the comprehensive stiffness obtained by the traditional calculation method considering the lubrication effect is smaller,especially for the ring-planet gear.Compared with roughness,speed and viscosity,the meshing characteristics of planetary gears are most sensitive to torque.展开更多
A complete mesh free adaptive algorithm （MFAA）, with solution adaptation and geometric adaptation, is developed to improve the resolution of flow features and to replace traditional global refinement techniques in s...A complete mesh free adaptive algorithm （MFAA）, with solution adaptation and geometric adaptation, is developed to improve the resolution of flow features and to replace traditional global refinement techniques in structured grids. Unnecessary redundant points and elements are avoided by using the mesh free local clouds refinement technology in shock influencing regions and regions near large curvature places on the boundary. Inviscid compressible flows over NACA0012 and RAE2822 airfoils are computed. Finally numerical results validate the accuracy of the above method.展开更多
基金This work was supported by the National Natural Science Foun-dation of China(No.41776194).
文摘The present study provides a three-dimensional volume-of-fluid method based on the adaptive mesh refinement technique.The projection method on the adaptive mesh is introduced for solving the incompressible Navier-Stokes equations.The octree structure mesh is employed to solve the flow velocities and the pressure.The developed solver is applied to simulate the deformation of the cubic droplet driven by the surface tension without the effect of the gravity.The numerical results well predict the shape evolution of the droplet.
基金funded by the National Natural Science Foundation of China(Grant No.12227801).
文摘This paper proposes a state-of-the-art three-dimensional Voronoi cell finite element method(3D VCFEM)aimed at investigating the mechanical properties of particle-reinforced composites(PRCs)in space under different microstructural properties.Firstly,the modified residual energy generalized function of 3D VCFEM was proposed by applying the hybrid stress element method,and the element format of the 3D Voronoi element was constructed.On this basis,the interaction between the matrix and the inclusions was considered,and the higher-order stress function including the interaction stress term was constructed.Secondly,to solve the difficulty of integrating easily due to the complexity and irregularity of the integration region in space,Delaunay tetrahedra were introduced within the 3D Voronoi element for mesh refinement.It simplified the integration process.Finally,to verify the accuracy and efficiency of the 3D VCFEM model,comparative models of 3D VCFENM and FEM were established for analysis and discussion.The stress field and strain field were compared and analyzed for the first time.An example was also given for the presence of a large number of randomly distributed inclusion particles.The results showed that under the same accuracy,3D VCFEM had the advantages of convenient mesh delineation and high computational efficiency compared with FEM,which provided a new way of thinking to analyze the actual PCRs.
文摘The phase field model can coherently address the relatively complex fracture phenomenon,such as crack nucleation,branching,deflection,etc.The model has been extensively implemented in the finite element package Abaqus to solve brittle fracture problems in recent studies.However,accurate numerical analysis typically requires fine meshes to model the evolving crack path effectively.A broad region must be discretized without prior knowledge of the crack path,further augmenting the computational expenses.In this proposed work,we present an automated framework utilizing a posteriori error-indicator(MISESERI)to demarcate and sufficiently refine the mesh along the anticipated crack path.This eliminates the need for manual mesh refinement based on previous experimental/computational results or heuristic judgment.The proposed Python-based framework integrates the preanalysis,sufficient mesh refinement,and subsequent phase-field model-based numerical analysis with user-defined subroutines in a single streamlined pass.The novelty of the proposed work lies in integrating Abaqus’s native error estimation and mesh refinement capability,tailored explicitly for phase-field simulations.The proposed methodology aims to reduce the computational resource requirement,thereby enhancing the efficiency of the phase-field simulations while preserving the solution accuracy,making the framework particularly advantageous for complex fracture problems where the computational/experimental results are limited or unavailable.Several benchmark numerical problems are solved to showcase the effectiveness and accuracy of the proposed approach.The numerical examples present the proposed approach’s efficacy in the case of a complex mixed-mode fracture problem.The results show significant reductions in computational resources compared to traditional phase-field methods,which is promising.
基金financially supported by the National Natural Science Foundation of China(No.41574127 and 41174104)the National Key Technology R&D Program for the 13th five-year plan(No.2016ZX05018006-006)
文摘To deal with the problem of low computational precision at the nodes near the source and satisfy the requirements for computational efficiency in inversion imaging and finite-element numerical simulations of the direct current method, we propose a new mesh refinement and recoarsement method for a two-dimensional point source. We introduce the mesh refinement and mesh recoarsement into the traditional structured mesh subdivision. By refining the horizontal grids, the singularity owing to the point source is minimized and the topography is simulated. By recoarsening the horizontal grids, the number of grid cells is reduced significantly and computational efficiency is improved. Model tests show that the proposed method solves the singularity problem and reduces the number of grid cells by 80% compared to the uniform grid refinement.
基金National High Technology Research and Development Program(863 Program)(No.2006AA06Z105,2007AA06Z134)
文摘Three-dimensional forward modeling magnetotellurics （MT） problems. We present a is a challenge for geometrically complex new edge-based finite-element algorithm using an unstructured mesh for accurately and efficiently simulating 3D MT responses. The electric field curl-curl equation in the frequency domain was used to deduce the H （curl） variation weak form of the MT forward problem, the Galerkin rule was used to derive a linear finite-element equation on the linear-edge tetrahedroid space, and, finally, a BI-CGSTAB solver was used to estimate the unknown electric fields. A local mesh refinement technique in the neighbor of the measuring MT stations was used to greatly improve the accuracies of the numerical solutions. Four synthetic models validated the powerful performance of our algorithms. We believe that our method will effectively contribute to processing more complex MT studies.
基金supported by the 973 Program of China 2005CB321702China NSF 10531080.
文摘Local mesh refinement is one of the key steps in the implementations of adaptive finite element methods. This paper presents a parallel algorithm for distributed memory parallel computers for adaptive local refinement of tetrahedral meshes using bisection. This algorithm is used in PHG, Parallel Hierarchical Grid Chttp：//lsec. cc. ac. cn/phg/）, a toolbox under active development for parallel adaptive finite element solutions of partial differential equations. The algorithm proposed is characterized by allowing simukaneous refinement of submeshes to arbitrary levels before synchronization between submeshes and without the need of a central coordinator process for managing new vertices. Using the concept of canonical refinement, a simple proof of the independence of the resulting mesh on the mesh partitioning is given, which is useful in better understanding the behaviour of the biseetioning refinement procedure.
基金supported by the National Natural Science Foundation of China(Nos.91752114 and 11672160)
文摘In the present paper, high-order finite volume schemes on unstructured grids developed in our previous papers are extended to solve three-dimensional inviscid and viscous flows. The highorder variational reconstruction technique in terms of compact stencil is improved to reduce local condition numbers. To further improve the efficiency of computation, the adaptive mesh refinement technique is implemented in the framework of high-order finite volume methods. Mesh refinement and coarsening criteria are chosen to be the indicators for certain flow structures. One important challenge of the adaptive mesh refinement technique on unstructured grids is the dynamic load balancing in parallel computation. To solve this problem, the open-source library p4 est based on the forest of octrees is adopted. Several two-and three-dimensional test cases are computed to verify the accuracy and robustness of the proposed numerical schemes.
基金Project supported by National Natural Science Foundation of China（Grant No. 60075009）
文摘In electrical impedance tomography （EIT）, distribution of the internal resistivity or conductivity of an unknown object is esti- mated using measured boundary voltage data induced by different current patterns with various reconstruction algorithms. The reconstruction algorithms usually employ the Newton-Raphson iteration scheme to visualize the resistivity distribution inside the object. Accuracy of the imaging process depends not only on the algorithm used, but also on the scheme of finite element discretization. In this paper an adaptive mesh refinement is used in a modified reconstruction algorithm for the regularized Err. The method has a major impact on efficient solution of the forward problem as well as on achieving improved image resolution. Computer simulations indicate that the Newton-Raphson reconstruction algorithm for Err using adaptive mesh refinement performs better than the classical Newton-Raphson algorithm in terms of reconstructed image resolution.
文摘In order to study the behavior and interconnection of network devices,graphs structures are used to formulate the properties in terms of mathematical models.Mesh network(meshnet)is a LAN topology in which devices are connected either directly or through some intermediate devices.These terminating and intermediate devices are considered as vertices of graph whereas wired or wireless connections among these devices are shown as edges of graph.Topological indices are used to reflect structural property of graphs in form of one real number.This structural invariant has revolutionized the field of chemistry to identify molecular descriptors of chemical compounds.These indices are extensively used for establishing relationships between the structure of nanotubes and their physico-chemical properties.In this paper a representation of sodium chloride(NaCl)is studied,because structure of NaCl is same as the Cartesian product of three paths of length exactly like a mesh network.In this way the general formula obtained in this paper can be used in chemistry as well as for any degree-based topological polynomials of three-dimensional mesh networks.
文摘A new method for estimating the posterior error of linear triangular element is presented. According to the specified accuracy, the element size and node spacing function of adaptive h-version mesh refinement are predicted. The main domain is divided by the isolines of node spacing into subregions in which mesh regeneration is realized. This remeshing refinement process implements mesh subdivision and mesh de-refinement in onecycle.
基金This work was financially supported by the National Natural Science Foundation of China(Nos.51779049,51879058,52071098,51979053).
文摘In this study,a numerical model for simulating two-phase flow is developed.The Cartesian grid with Adaptive Mesh Refinement(AMR)is adopted to reduce the computational cost.An explicit projection method is used for the time integration and the Finite Difference Method(FDM)is applied on a staggered grid for the discretization of spatial derivatives.The Volume of Fluid(VOF)method with Piecewise-Linear Interface Calculation(PLIC)is extended to the AMR grid to capture the gas-water interface accurately.A coarse-fine interface treatment method is developed to preserve the flux conservation at the interfaces.Several two-dimensional(2D)and three-dimensional(3D)benchmark cases are carried out for the validation of the model.2D and 3D shear flow tests are conducted to validate the extension of the VOF method to the AMR grid.A 2D linear sloshing case is considered in which the model is proved to have 2nd-order accuracy in space.The efficiency of applying the AMR grid is discussed with a nonlinear sloshing problem.Finally,2D solitary wave past stage and 2D/3D dam break are simulated to demonstrate that the model is able to simulate violent interface problems.
基金the National Natural Science Foundation of China(No.50275094).
文摘Based on the characteristics of 3D bulk forming process, the arbitrary Lagrangian-Eulerian (ALE) formulation-based FEM is studied, and a prediction-correction ALE-based FEM is proposed which integrates the advantages of precisely predicting the boundary configuration of the deformed material, and of efficiently avoiding hexahedron remeshing processes. The key idea of the prediction-correction ALE FEM is elaborated in detail. Accordingly, the strategy of mesh quality control, one of the key enabling techniques for the 3D bulk forming process numerical simulation by the prediction-correction ALE FEM is carefully investigated, and the algorithm for hexahedral element refinement is formulated based on the mesh distortion energy.
基金supported by the National Natural Science Foundation of China(Grant Nos.41941017 and 42177139)Graduate Innovation Fund of Jilin University(Grant No.2024CX099)。
文摘The spatial distribution of discontinuities and the size of rock blocks are the key indicators for rock mass quality evaluation and rockfall risk assessment.Traditional manual measurement is often dangerous or unreachable at some high-steep rock slopes.In contrast,unmanned aerial vehicle(UAV)photogrammetry is not limited by terrain conditions,and can efficiently collect high-precision three-dimensional(3D)point clouds of rock masses through all-round and multiangle photography for rock mass characterization.In this paper,a new method based on a 3D point cloud is proposed for discontinuity identification and refined rock block modeling.The method is based on four steps:(1)Establish a point cloud spatial topology,and calculate the point cloud normal vector and average point spacing based on several machine learning algorithms;(2)Extract discontinuities using the density-based spatial clustering of applications with noise(DBSCAN)algorithm and fit the discontinuity plane by combining principal component analysis(PCA)with the natural breaks(NB)method;(3)Propose a method of inserting points in the line segment to generate an embedded discontinuity point cloud;and(4)Adopt a Poisson reconstruction method for refined rock block modeling.The proposed method was applied to an outcrop of an ultrahigh steep rock slope and compared with the results of previous studies and manual surveys.The results show that the method can eliminate the influence of discontinuity undulations on the orientation measurement and describe the local concave-convex characteristics on the modeling of rock blocks.The calculation results are accurate and reliable,which can meet the practical requirements of engineering.
基金Project(2024A1515240020)supported by the Guangdong Basic and Applied Basic Research Foundation,China。
文摘The contact characteristics of the rough tooth surface during the meshing process are significantly affected by the lubrication state.The coupling effect of tooth surface roughness and lubrication on meshing characteristics of planetary gear is studied.An improved three-dimensional(3 D)anisotropic tooth surface roughness fractal model is proposed based on the experimental parameters.Considering asperity contact and elastohydrodynamic lubrication(EHL),the contact load and flexibility deformation of the tooth surface are derived,and the deformation compatibility equation of the 3 D loaded tooth contact analysis(3 D-LTCA)method is improved.The asperity of the tooth surface changes the system from EHL to mixed lubrication and reduces the stiffness of the oil film.Compared with the sun planet gear,the asperity has a greater effect on the meshing characteristics of the ring-planet gear.Compared with the proposed method,the comprehensive stiffness obtained by the traditional calculation method considering the lubrication effect is smaller,especially for the ring-planet gear.Compared with roughness,speed and viscosity,the meshing characteristics of planetary gears are most sensitive to torque.
文摘A complete mesh free adaptive algorithm （MFAA）, with solution adaptation and geometric adaptation, is developed to improve the resolution of flow features and to replace traditional global refinement techniques in structured grids. Unnecessary redundant points and elements are avoided by using the mesh free local clouds refinement technology in shock influencing regions and regions near large curvature places on the boundary. Inviscid compressible flows over NACA0012 and RAE2822 airfoils are computed. Finally numerical results validate the accuracy of the above method.
