It is of great importance to obtain precise trace data,as traces are frequently the sole visible and measurable parameter in most outcrops.The manual recognition and detection of traces on high-resolution three-dimens...It is of great importance to obtain precise trace data,as traces are frequently the sole visible and measurable parameter in most outcrops.The manual recognition and detection of traces on high-resolution three-dimensional(3D)models are relatively straightforward but time-consuming.One potential solution to enhance this process is to use machine learning algorithms to detect the 3D traces.In this study,a unique pixel-wise texture mapper algorithm generates a dense point cloud representation of an outcrop with the precise resolution of the original textured 3D model.A virtual digital image rendering was then employed to capture virtual images of selected regions.This technique helps to overcome limitations caused by the surface morphology of the rock mass,such as restricted access,lighting conditions,and shading effects.After AI-powered trace detection on two-dimensional(2D)images,a 3D data structuring technique was applied to the selected trace pixels.In the 3D data structuring,the trace data were structured through 2D thinning,3D reprojection,clustering,segmentation,and segment linking.Finally,the linked segments were exported as 3D polylines,with each polyline in the output corresponding to a trace.The efficacy of the proposed method was assessed using a 3D model of a real-world case study,which was used to compare the results of artificial intelligence(AI)-aided and human intelligence trace detection.Rosette diagrams,which visualize the distribution of trace orientations,confirmed the high similarity between the automatically and manually generated trace maps.In conclusion,the proposed semi-automatic method was easy to use,fast,and accurate in detecting the dominant jointing system of the rock mass.展开更多
This paper presents a reconstruction model of three-dimensional temperature distribution in furnace based on radiative energy images captured by charge-coupled device （CCD） cameras within the visible wavelength rang...This paper presents a reconstruction model of three-dimensional temperature distribution in furnace based on radiative energy images captured by charge-coupled device （CCD） cameras within the visible wavelength range. Numerical simulation case was used in this study and a zigzag eccentric temperature distribution was assumed to verify the model. Least square QR-factorization （LSQR） method was introduced to deal with reconstruction equation. It is found that the reconstructed temperature distributions in low-temperature areas had some fluctuations and high-temperature areas were reconstructed well. The whole reconstruction relative error was mainly due to errors in low-temperature areas and the relative error for highest-temperature reconstruction was quite small.展开更多
In terms of asymmetrical three-dimensional distribution(ID) of luminous intensity(LI) of light-emitting-diode(LED),a testing system was conducted in this study. Design and principle of the testing system were introduc...In terms of asymmetrical three-dimensional distribution(ID) of luminous intensity(LI) of light-emitting-diode(LED),a testing system was conducted in this study. Design and principle of the testing system were introduced. 31 photometers were placed on a concentric circle,and all of them were used to gather LI data of LED at the same time. The data acquisition card(DAC) was used to gather multichannel data and controlled motor. Experimental results indicated that the testing system had achieved the goal of testing three-dimensional distribution of LI. And each parameter could meet the requirements of industrial production and measurement.展开更多
The joint probability distribution of wind speed and significant wave height in the Bohai Bay was investigated by comparing the Gurnbel logistic model, the Gumbel-Hougaard （GH） copula function, and the Clayton copul...The joint probability distribution of wind speed and significant wave height in the Bohai Bay was investigated by comparing the Gurnbel logistic model, the Gumbel-Hougaard （GH） copula function, and the Clayton copula function. Twenty years of wind data from 1989 to 2008 were collected from the European Centre for Medium-Range Weather Forecasts （ECMWF） database and the blended wind data of the Quick Scatterometer （QSCAT） satellite data set and re-analysis data from the United States National Centers for Environmental Prediction （NCEP）. Several typhoons were taken into account and merged with the background wind fields from the ECMWF or QSCAT/NCEP database. The 20-year data of significant wave height were calculated with the unstructured-grid version of the third-generation wind wave model Simulating WAves Nearshore （SWAN） under extreme wind process conditions. The Gumbel distribution was used for univariate and marginal distributions. The distribution parameters were estimated with the method of L-moments. Based on the marginal distributions, the joint probability distributions, the associated return periods, and the conditional probability distributions were obtained. The GH copula function was found to be optimal according to the ordinary least squares （OLS） test. The results show that wind waves are the prevailing type of wave in the Bohai Bay.展开更多
Joint location and scale models of the skew-normal distribution provide useful ex- tension for joint mean and variance models of the normal distribution when the data set under consideration involves asymmetric outcom...Joint location and scale models of the skew-normal distribution provide useful ex- tension for joint mean and variance models of the normal distribution when the data set under consideration involves asymmetric outcomes. This paper focuses on the maximum likelihood estimation of joint location and scale models of the skew-normal distribution. The proposed procedure can simultaneously estimate parameters in the location model and the scale model. Simulation studies and a real example are used to illustrate the proposed methodologies.展开更多
The paper presents a new three-dimensional (3D) cooperative guidance approach by the receding horizon control (RHC) technique. The objective is to coordinate the impact time of a group of interceptor missiles against ...The paper presents a new three-dimensional (3D) cooperative guidance approach by the receding horizon control (RHC) technique. The objective is to coordinate the impact time of a group of interceptor missiles against the stationary target. The framework of a distributed RHC scheme is developed, in which each interceptor missile is assigned its own finite-horizon optimal control problem (FHOCP) and only shares the information with its neighbors. The solution of the local FHOCP is obtained by the constrained particle swarm optimization (PSO) method that is integrated into the distributed RHC framework with enhanced equality and inequality constraints. The numerical simulations show that the proposed guidance approach is feasible to implement the cooperative engagement with satisfied accuracy of target capture. Finally, the computation efficiency of the distributed RHC scheme is discussed in consideration of the PSO parameters, control update period and prediction horizon. (C) 2016 Chinese Society of Aeronautics and Astronautics. Production and hosting by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license.展开更多
We studied the effect of loose tenon dimensions on stress and strain distributions in T-shaped mortise and loose tenon （M＆amp;LT） furni-ture joints under uniaxial bending loads, and determined the effects of loose ...We studied the effect of loose tenon dimensions on stress and strain distributions in T-shaped mortise and loose tenon （M＆amp;LT） furni-ture joints under uniaxial bending loads, and determined the effects of loose tenon length （30, 45, 60, and 90 mm） and loose tenon thickness （6 and 8 mm） on bending moment capacity of M＆amp;LT joints constructed with polyvinyl acetate （PVAc） adhesive. Stress and strain distributions in joint elements were then estimated for each joint using ANSYS finite element （FE） software. The bending moment capacity of joints increased significantly with thickness and length of the tenon. Based on the FE analysis results, under uniaxial bending, the highest shear stress values were obtained in the middle parts of the tenon, while the highest shear elastic strain values were estimated in glue lines between the tenon sur-faces and walls of the mortise. Shear stress and shear elastic strain values in joint elements generally increased with tenon dimensions and corre-sponding bending moment capacities. There was consistency between predicted maximum shear stress values and failure modes of the joints.展开更多
The shear behavior of rock joints is important in solving practical problems of rock mechanics. Three group rock joints with different morphologies are made by cement mortar material and a series of CNL(constant norma...The shear behavior of rock joints is important in solving practical problems of rock mechanics. Three group rock joints with different morphologies are made by cement mortar material and a series of CNL(constant normal loading) shear tests are performed. The influences of the applied normal stress and joint morphology to its shear strength are analyzed. According to the experimental results, the peak dilatancy angle of rock joint decreases with increasing normal stress, but increases with increasing roughness. The shear strength increases with the increasing normal stress and the roughness of rock joint. It is observed that the modes of failure of asperities are tensile, pure shear, or a combination of both. It is suggested that the three-dimensional roughness parameters and the tensile strength are the appropriate parameter for describing the shear strength criterion. A new peak shear criterion is proposed which can be used to predict peak shear strength of rock joints. All the used parameters can be easily obtained by performing tests.展开更多
Relative navigation is a key feature in the joint tactical information distribution system（JTIDS）.A parametric message passing algorithm based on factor graph is proposed to perform relative navigation in JTIDS.Firs...Relative navigation is a key feature in the joint tactical information distribution system（JTIDS）.A parametric message passing algorithm based on factor graph is proposed to perform relative navigation in JTIDS.First of all,the joint posterior distribution of all the terminals＇ positions is represented by factor graph.Because of the nonlinearity between the positions and time-of-arrival（TOA） measurement,messages cannot be obtained in closed forms by directly using the sum-product algorithm on factor graph.To this end,the Euclidean norm is approximated by Taylor expansion.Then,all the messages on the factor graph can be derived in Gaussian forms,which enables the terminals to transmit means and covariances.Finally,the impact of major error sources on the navigation performance are evaluated by Monte Carlo simulations,e.g.,range measurement noise,priors of position uncertainty and velocity noise.Results show that the proposed algorithm outperforms the extended Kalman filter and cooperative extended Kalman filter in both static and mobile scenarios of the JTIDS.展开更多
Survival of HIV/AIDS patients is crucially dependent on comprehensive and targeted medical interventions such as supply of antiretroviral therapy and monitoring disease progression with CD4 T-cell counts. Statistical ...Survival of HIV/AIDS patients is crucially dependent on comprehensive and targeted medical interventions such as supply of antiretroviral therapy and monitoring disease progression with CD4 T-cell counts. Statistical modelling approaches are helpful towards this goal. This study aims at developing Bayesian joint models with assumed generalized error distribution (GED) for the longitudinal CD4 data and two accelerated failure time distributions, Lognormal and loglogistic, for the survival time of HIV/AIDS patients. Data are obtained from patients under antiretroviral therapy follow-up at Shashemene referral hospital during January 2006-January 2012 and at Bale Robe general hospital during January 2008-March 2015. The Bayesian joint models are defined through latent variables and association parameters and with specified non-informative prior distributions for the model parameters. Simulations are conducted using Gibbs sampler algorithm implemented in the WinBUGS software. The results of the analyses of the two different data sets show that distributions of measurement errors of the longitudinal CD4 variable follow the generalized error distribution with fatter tails than the normal distribution. The Bayesian joint GED loglogistic models fit better to the data sets compared to the lognormal cases. Findings reveal that patients’ health can be improved over time. Compared to the males, female patients gain more CD4 counts. Survival time of a patient is negatively affected by TB infection. Moreover, increase in number of opportunistic infection implies decline of CD4 counts. Patients’ age negatively affects the disease marker with no effects on survival time. Improving weight may improve survival time of patients. Bayesian joint models with GED and AFT distributions are found to be useful in modelling the longitudinal and survival processes. Thus we recommend the generalized error distributions for measurement errors of the longitudinal data under the Bayesian joint modelling. Further studies may investigate the models with various types of shared random effects and more covariates with predictions.展开更多
Rational distribution network planning optimizes power flow distribution,reduces grid stress,enhances voltage quality,promotes renewable energy utilization,and reduces costs.This study establishes a distribution netwo...Rational distribution network planning optimizes power flow distribution,reduces grid stress,enhances voltage quality,promotes renewable energy utilization,and reduces costs.This study establishes a distribution network planning model incorporating distributed wind turbines(DWT),distributed photovoltaics(DPV),and energy storage systems(ESS).K-means++is employed to partition the distribution network based on electrical distance.Considering the spatiotemporal correlation of distributed generation(DG)outputs in the same region,a joint output model of DWT and DPV is developed using the Frank-Copula.Due to the model’s high dimensionality,multiple constraints,and mixed-integer characteristics,bilevel programming theory is utilized to structure the model.The model is solved using a mixed-integer particle swarmoptimization algorithm(MIPSO)to determine the optimal location and capacity of DG and ESS integrated into the distribution network to achieve the best economic benefits and operation quality.The proposed bilevel planning method for distribution networks is validated through simulations on the modified IEEE 33-bus system.The results demonstrate significant improvements,with the proposedmethod reducing the annual comprehensive cost by 41.65%and 13.98%,respectively,compared to scenarios without DG and ESS or with only DG integration.Furthermore,it reduces the daily average voltage deviation by 24.35%and 10.24%and daily network losses by 55.72%and 35.71%.展开更多
In this paper, we study the compound binomial model in Markovian environment, which is proposed by Cossette, et al. （2003）. We obtain the recursive formula of the joint distributions of T, X（T - 1） and ｜X（T）｜...In this paper, we study the compound binomial model in Markovian environment, which is proposed by Cossette, et al. （2003）. We obtain the recursive formula of the joint distributions of T, X（T - 1） and ｜X（T）｜（i.e., the time of ruin, the surplus before ruin and the deficit at ruin） by the method of mass function of up-crossing zero points, as given by Liu and Zhao （2007）. By using the same method, the recursive formula of supremum distribution is obtained. An example is included to illustrate the results of the model.展开更多
In this paper, by using the wave data from a few oceanographic observation stations in the coastal zone of the Yellow Sea, the East China Sea and the South China Sea, the long-term joint distribution of the one-tenth ...In this paper, by using the wave data from a few oceanographic observation stations in the coastal zone of the Yellow Sea, the East China Sea and the South China Sea, the long-term joint distribution of the one-tenth large (or significant) wave height with average period is studied. The statistical data demonstrate that the long- term distribution of the one- tenth wave height or average period fits the log-normal distribution, thus the joint distribution also fits the two-dimensional log-normal distribution. Then the conditional probability distribution of the average period is derived, and the range as well as the mode of the average wave period corresponding to a certain return period of wave height can be calculated easily.展开更多
The Effect of elastic modulus and thickness of the adhesives on the stress distribution in weldbonded joints has been studied with three-dimensional elastoplastic finite element method ( FEM). Stress distribution curv...The Effect of elastic modulus and thickness of the adhesives on the stress distribution in weldbonded joints has been studied with three-dimensional elastoplastic finite element method ( FEM). Stress distribution curves have been obtained at the edges of the spot welds and the lap zones in weldbonded joints, which were made with adhesives of different elastic modulus or different thickness. Results show that there exists larger stress concentration at the edge of the spot welds, though the shear stresses in the adhesive layers are smaller for weldbonded joints with low elastic modulus or thick adhesive layers. The stress concentration decreases and the shear stresses in adhesive layers increase with the increase of the elastic modulus or the decrease of the adhesive thickness. It is concluded that the thiner adhesive layers with higher elastic modulius are preferable in weldbonded joints to cut down the stress concentration.展开更多
The rate of change of wave surface elevation is of much importance in ocean engineering, especially for the determination of the limitation of wave breaking. This paper gives a kind of joint distribution of wave perio...The rate of change of wave surface elevation is of much importance in ocean engineering, especially for the determination of the limitation of wave breaking. This paper gives a kind of joint distribution of wave periods and the rate of change of wave surface elevation by means of calculation of the two-order to four-order moment of the frequency spectrum based on the linear wave theory. For the first time, the distribution density function of wave periods determined by peaks is provided, and the conclusion is drawn that the rate of change of wave surface elevation obeys the Rayleigh distribution.展开更多
The spatial distribution function and second moments of circular freely jointed chain are derived based on an analytical method. The circular Gauss chain, which is simple for long chains, is compared with the circular...The spatial distribution function and second moments of circular freely jointed chain are derived based on an analytical method. The circular Gauss chain, which is simple for long chains, is compared with the circular freely jointed chain, which is exact for short chains. It is shown that the Gauss chain model predicts a more compact configurational distribution than the exact freely jointed chain. The two chain models, however, become closer to each other when the chain length increases. It is found that the difference of the mean square radius of gyration calculated with these two chain models is a constant, independent of the chain length.展开更多
The modified versions of the linear theoretical model of Longuet-Higgins （1983） are derived in this work and also compared with the laboratory experiments carried out in MAR1NTEK. The main feature of modifications i...The modified versions of the linear theoretical model of Longuet-Higgins （1983） are derived in this work and also compared with the laboratory experiments carried out in MAR1NTEK. The main feature of modifications is to replace the mean frequency in the formulation with the peak frequency of the wave spectrum. These two alternative forms of joint distributions are checked in three typical random sea states characterized by the initial wave steepness. In order to further explore the properties ＆these models, the associated marginal distributions of wave heights and wave periods are also researched with the observed statistics and some encouraging results are obtained.展开更多
In this paper,the influence of forced installation caused by a hole-location error on the 3D stress distribution and damage of a composite bolted joint is investigated.An analytical model of stress distributed on comp...In this paper,the influence of forced installation caused by a hole-location error on the 3D stress distribution and damage of a composite bolted joint is investigated.An analytical model of stress distributed on composite holes is promoted,in view of non-uniform extrusion caused by forced installation.At first,non-uniform extrusion of the hole edge caused by forced installation is analyzed.According to the contact state,expression of hole deformation is given.Then,based on Hertz theory,the maximum extrusion load is obtained with help of deformation expression.By constructing an elastic foundation beam model,3D stress distributed on a hole could be analyzed according to the extrusion load.Then,stress distribution predicted by the above analytical method is compared with that provided by FE considering composite damage.Finally,a forced installation experiment is carried out to analyze the damage distribution of the joint.Results show that a central-symmetrically distributed stress is introduced by the hole-location error.With an increment of the error,strength of composite decreases due to extrusion damage.Therefore,stress presents a concave distribution on the hole.As the hole-location error exceeding 3%,stress decreases gradually due to failure of composite.Damage of holes does not exhibit a centrosymmetric distribution.Serious damage is mainly distributed on the entrance of the hole at the lower sheet.展开更多
The efficient utilization of propeller slipstream energy is important for improving the ultra-short takeoff and landing capability of Distributed Electric Propulsion(DEP)aircraft.This paper presents a quasi-three-dime...The efficient utilization of propeller slipstream energy is important for improving the ultra-short takeoff and landing capability of Distributed Electric Propulsion(DEP)aircraft.This paper presents a quasi-three-dimensional(2.5D)high-lift wing design approach considering the three-dimensional(3D)effects of slipstream for DEP aircraft,aiming at maximizing the comprehensive lift enhancement benefit of the airframe-propulsion coupling unit.A high-precision and efficient momentum source method is adopted to simulate the slipstream effects,and the distributed propellers are replaced by a rectangular actuator disk to reduce the difficulty of grid generation and improve the grid quality.A detailed comparison of the 2.5D and 3D configurations based on the X-57 ModⅣis performed in terms of flow characteristics and computational cost to demonstrate the rationality of the above design approach.The optimization results of the high-lift wing of the X-57 ModⅣshow that the aerodynamic performance of the landing configuration is significantly improved,for instance,the lift coefficient increases by 0.094 at the angle of attack of 7°,and 0.097 at the angle of attack of 14°.This novel approach achieves efficient and effective design of high-lift wings under the influence of distributed slipstream,which has the potential to improve the design level of DEP aircraft.展开更多
By analysing the scatter diagrams of characteristic the wave height H and the period T on the basis of instrumental data from various ocean wave stations, we found that the conditional expectation and standard deviati...By analysing the scatter diagrams of characteristic the wave height H and the period T on the basis of instrumental data from various ocean wave stations, we found that the conditional expectation and standard deviation of wave period for a given wave height can be better predicted by using the equations of normal linear regression rather than by those based on the log- normal law. The latter was implied in Ochi' s bivariate log-normal model(Ochi. 1978) for the long-term joint distribution of H and T. With the expectation and standard deviation predicted by the normal linear regression equations and applying proper types of distribution, we have obtained the conditional distribution of T for given H. Then combining this conditional P(T / H) with long-term marginal distribution of the wave height P(H) we establish a new parameterized model for the long-term joint distribution P(H,T). As an example of the application of the new model we give a method for estimating wave period associated with an extreme wave height.展开更多
基金supported by grants from the Human Resources Development program (Grant No.20204010600250)the Training Program of CCUS for the Green Growth (Grant No.20214000000500)by the Korea Institute of Energy Technology Evaluation and Planning (KETEP)funded by the Ministry of Trade,Industry,and Energy of the Korean Government (MOTIE).
文摘It is of great importance to obtain precise trace data,as traces are frequently the sole visible and measurable parameter in most outcrops.The manual recognition and detection of traces on high-resolution three-dimensional(3D)models are relatively straightforward but time-consuming.One potential solution to enhance this process is to use machine learning algorithms to detect the 3D traces.In this study,a unique pixel-wise texture mapper algorithm generates a dense point cloud representation of an outcrop with the precise resolution of the original textured 3D model.A virtual digital image rendering was then employed to capture virtual images of selected regions.This technique helps to overcome limitations caused by the surface morphology of the rock mass,such as restricted access,lighting conditions,and shading effects.After AI-powered trace detection on two-dimensional(2D)images,a 3D data structuring technique was applied to the selected trace pixels.In the 3D data structuring,the trace data were structured through 2D thinning,3D reprojection,clustering,segmentation,and segment linking.Finally,the linked segments were exported as 3D polylines,with each polyline in the output corresponding to a trace.The efficacy of the proposed method was assessed using a 3D model of a real-world case study,which was used to compare the results of artificial intelligence(AI)-aided and human intelligence trace detection.Rosette diagrams,which visualize the distribution of trace orientations,confirmed the high similarity between the automatically and manually generated trace maps.In conclusion,the proposed semi-automatic method was easy to use,fast,and accurate in detecting the dominant jointing system of the rock mass.
基金Project supported by the State Key Program of National Natural Science Foundation of China (Grant No 60534030)Program for Changjiang Scholars and Innovative Research Team in University (Grant No IRT0434)
文摘This paper presents a reconstruction model of three-dimensional temperature distribution in furnace based on radiative energy images captured by charge-coupled device （CCD） cameras within the visible wavelength range. Numerical simulation case was used in this study and a zigzag eccentric temperature distribution was assumed to verify the model. Least square QR-factorization （LSQR） method was introduced to deal with reconstruction equation. It is found that the reconstructed temperature distributions in low-temperature areas had some fluctuations and high-temperature areas were reconstructed well. The whole reconstruction relative error was mainly due to errors in low-temperature areas and the relative error for highest-temperature reconstruction was quite small.
文摘In terms of asymmetrical three-dimensional distribution(ID) of luminous intensity(LI) of light-emitting-diode(LED),a testing system was conducted in this study. Design and principle of the testing system were introduced. 31 photometers were placed on a concentric circle,and all of them were used to gather LI data of LED at the same time. The data acquisition card(DAC) was used to gather multichannel data and controlled motor. Experimental results indicated that the testing system had achieved the goal of testing three-dimensional distribution of LI. And each parameter could meet the requirements of industrial production and measurement.
基金supported by the Science Fund for Creative Research Groups of the National Natural ScienceFoundation of China (Grant No. 51021004)the National High Technology Research and DevelopmentProgram of China (863 Program, Grants No. 2012AA112509 and 2012AA051702)
文摘The joint probability distribution of wind speed and significant wave height in the Bohai Bay was investigated by comparing the Gurnbel logistic model, the Gumbel-Hougaard （GH） copula function, and the Clayton copula function. Twenty years of wind data from 1989 to 2008 were collected from the European Centre for Medium-Range Weather Forecasts （ECMWF） database and the blended wind data of the Quick Scatterometer （QSCAT） satellite data set and re-analysis data from the United States National Centers for Environmental Prediction （NCEP）. Several typhoons were taken into account and merged with the background wind fields from the ECMWF or QSCAT/NCEP database. The 20-year data of significant wave height were calculated with the unstructured-grid version of the third-generation wind wave model Simulating WAves Nearshore （SWAN） under extreme wind process conditions. The Gumbel distribution was used for univariate and marginal distributions. The distribution parameters were estimated with the method of L-moments. Based on the marginal distributions, the joint probability distributions, the associated return periods, and the conditional probability distributions were obtained. The GH copula function was found to be optimal according to the ordinary least squares （OLS） test. The results show that wind waves are the prevailing type of wave in the Bohai Bay.
基金Supported by the National Natural Science Foundation of China(11261025,11201412)the Natural Science Foundation of Yunnan Province(2011FB016)the Program for Middle-aged Backbone Teacher,Yunnan University
文摘Joint location and scale models of the skew-normal distribution provide useful ex- tension for joint mean and variance models of the normal distribution when the data set under consideration involves asymmetric outcomes. This paper focuses on the maximum likelihood estimation of joint location and scale models of the skew-normal distribution. The proposed procedure can simultaneously estimate parameters in the location model and the scale model. Simulation studies and a real example are used to illustrate the proposed methodologies.
基金co-supported by the National Natural Science Foundation of China(Nos. 61273349 and 61573043)
文摘The paper presents a new three-dimensional (3D) cooperative guidance approach by the receding horizon control (RHC) technique. The objective is to coordinate the impact time of a group of interceptor missiles against the stationary target. The framework of a distributed RHC scheme is developed, in which each interceptor missile is assigned its own finite-horizon optimal control problem (FHOCP) and only shares the information with its neighbors. The solution of the local FHOCP is obtained by the constrained particle swarm optimization (PSO) method that is integrated into the distributed RHC framework with enhanced equality and inequality constraints. The numerical simulations show that the proposed guidance approach is feasible to implement the cooperative engagement with satisfied accuracy of target capture. Finally, the computation efficiency of the distributed RHC scheme is discussed in consideration of the PSO parameters, control update period and prediction horizon. (C) 2016 Chinese Society of Aeronautics and Astronautics. Production and hosting by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license.
文摘We studied the effect of loose tenon dimensions on stress and strain distributions in T-shaped mortise and loose tenon （M＆amp;LT） furni-ture joints under uniaxial bending loads, and determined the effects of loose tenon length （30, 45, 60, and 90 mm） and loose tenon thickness （6 and 8 mm） on bending moment capacity of M＆amp;LT joints constructed with polyvinyl acetate （PVAc） adhesive. Stress and strain distributions in joint elements were then estimated for each joint using ANSYS finite element （FE） software. The bending moment capacity of joints increased significantly with thickness and length of the tenon. Based on the FE analysis results, under uniaxial bending, the highest shear stress values were obtained in the middle parts of the tenon, while the highest shear elastic strain values were estimated in glue lines between the tenon sur-faces and walls of the mortise. Shear stress and shear elastic strain values in joint elements generally increased with tenon dimensions and corre-sponding bending moment capacities. There was consistency between predicted maximum shear stress values and failure modes of the joints.
基金Project(41130742)supported by the Key Program of National Natural Science Foundation of ChinaProject(2014CB046904)supportedby the National Basic Research Program of China+1 种基金Project(2011CDA119)supported by Natural Science Foundation of Hubei Province,ChinaProject(40972178)supported by the General Program of National Natural Science Foundation of China
文摘The shear behavior of rock joints is important in solving practical problems of rock mechanics. Three group rock joints with different morphologies are made by cement mortar material and a series of CNL(constant normal loading) shear tests are performed. The influences of the applied normal stress and joint morphology to its shear strength are analyzed. According to the experimental results, the peak dilatancy angle of rock joint decreases with increasing normal stress, but increases with increasing roughness. The shear strength increases with the increasing normal stress and the roughness of rock joint. It is observed that the modes of failure of asperities are tensile, pure shear, or a combination of both. It is suggested that the three-dimensional roughness parameters and the tensile strength are the appropriate parameter for describing the shear strength criterion. A new peak shear criterion is proposed which can be used to predict peak shear strength of rock joints. All the used parameters can be easily obtained by performing tests.
基金supported by the National Natural Science Foundation of China(6120118161471037+1 种基金61571041)the Foundation for the Author of National Excellent Doctoral Dissertation of China(201445)
文摘Relative navigation is a key feature in the joint tactical information distribution system（JTIDS）.A parametric message passing algorithm based on factor graph is proposed to perform relative navigation in JTIDS.First of all,the joint posterior distribution of all the terminals＇ positions is represented by factor graph.Because of the nonlinearity between the positions and time-of-arrival（TOA） measurement,messages cannot be obtained in closed forms by directly using the sum-product algorithm on factor graph.To this end,the Euclidean norm is approximated by Taylor expansion.Then,all the messages on the factor graph can be derived in Gaussian forms,which enables the terminals to transmit means and covariances.Finally,the impact of major error sources on the navigation performance are evaluated by Monte Carlo simulations,e.g.,range measurement noise,priors of position uncertainty and velocity noise.Results show that the proposed algorithm outperforms the extended Kalman filter and cooperative extended Kalman filter in both static and mobile scenarios of the JTIDS.
文摘Survival of HIV/AIDS patients is crucially dependent on comprehensive and targeted medical interventions such as supply of antiretroviral therapy and monitoring disease progression with CD4 T-cell counts. Statistical modelling approaches are helpful towards this goal. This study aims at developing Bayesian joint models with assumed generalized error distribution (GED) for the longitudinal CD4 data and two accelerated failure time distributions, Lognormal and loglogistic, for the survival time of HIV/AIDS patients. Data are obtained from patients under antiretroviral therapy follow-up at Shashemene referral hospital during January 2006-January 2012 and at Bale Robe general hospital during January 2008-March 2015. The Bayesian joint models are defined through latent variables and association parameters and with specified non-informative prior distributions for the model parameters. Simulations are conducted using Gibbs sampler algorithm implemented in the WinBUGS software. The results of the analyses of the two different data sets show that distributions of measurement errors of the longitudinal CD4 variable follow the generalized error distribution with fatter tails than the normal distribution. The Bayesian joint GED loglogistic models fit better to the data sets compared to the lognormal cases. Findings reveal that patients’ health can be improved over time. Compared to the males, female patients gain more CD4 counts. Survival time of a patient is negatively affected by TB infection. Moreover, increase in number of opportunistic infection implies decline of CD4 counts. Patients’ age negatively affects the disease marker with no effects on survival time. Improving weight may improve survival time of patients. Bayesian joint models with GED and AFT distributions are found to be useful in modelling the longitudinal and survival processes. Thus we recommend the generalized error distributions for measurement errors of the longitudinal data under the Bayesian joint modelling. Further studies may investigate the models with various types of shared random effects and more covariates with predictions.
基金This research was funded by“Chunhui Program”Collaborative Scientific Research Project of the Ministry of Education of the People’s Republic of China(Project No.HZKY20220242)the S&T Program of Hebei(Project No.225676163GH).
文摘Rational distribution network planning optimizes power flow distribution,reduces grid stress,enhances voltage quality,promotes renewable energy utilization,and reduces costs.This study establishes a distribution network planning model incorporating distributed wind turbines(DWT),distributed photovoltaics(DPV),and energy storage systems(ESS).K-means++is employed to partition the distribution network based on electrical distance.Considering the spatiotemporal correlation of distributed generation(DG)outputs in the same region,a joint output model of DWT and DPV is developed using the Frank-Copula.Due to the model’s high dimensionality,multiple constraints,and mixed-integer characteristics,bilevel programming theory is utilized to structure the model.The model is solved using a mixed-integer particle swarmoptimization algorithm(MIPSO)to determine the optimal location and capacity of DG and ESS integrated into the distribution network to achieve the best economic benefits and operation quality.The proposed bilevel planning method for distribution networks is validated through simulations on the modified IEEE 33-bus system.The results demonstrate significant improvements,with the proposedmethod reducing the annual comprehensive cost by 41.65%and 13.98%,respectively,compared to scenarios without DG and ESS or with only DG integration.Furthermore,it reduces the daily average voltage deviation by 24.35%and 10.24%and daily network losses by 55.72%and 35.71%.
基金Supported by the National Natural Science Foundation of China (10671176, 10771192, 70871103)
文摘In this paper, we study the compound binomial model in Markovian environment, which is proposed by Cossette, et al. （2003）. We obtain the recursive formula of the joint distributions of T, X（T - 1） and ｜X（T）｜（i.e., the time of ruin, the surplus before ruin and the deficit at ruin） by the method of mass function of up-crossing zero points, as given by Liu and Zhao （2007）. By using the same method, the recursive formula of supremum distribution is obtained. An example is included to illustrate the results of the model.
文摘In this paper, by using the wave data from a few oceanographic observation stations in the coastal zone of the Yellow Sea, the East China Sea and the South China Sea, the long-term joint distribution of the one-tenth large (or significant) wave height with average period is studied. The statistical data demonstrate that the long- term distribution of the one- tenth wave height or average period fits the log-normal distribution, thus the joint distribution also fits the two-dimensional log-normal distribution. Then the conditional probability distribution of the average period is derived, and the range as well as the mode of the average wave period corresponding to a certain return period of wave height can be calculated easily.
文摘The Effect of elastic modulus and thickness of the adhesives on the stress distribution in weldbonded joints has been studied with three-dimensional elastoplastic finite element method ( FEM). Stress distribution curves have been obtained at the edges of the spot welds and the lap zones in weldbonded joints, which were made with adhesives of different elastic modulus or different thickness. Results show that there exists larger stress concentration at the edge of the spot welds, though the shear stresses in the adhesive layers are smaller for weldbonded joints with low elastic modulus or thick adhesive layers. The stress concentration decreases and the shear stresses in adhesive layers increase with the increase of the elastic modulus or the decrease of the adhesive thickness. It is concluded that the thiner adhesive layers with higher elastic modulius are preferable in weldbonded joints to cut down the stress concentration.
基金National Natural Science Foundation of China.(No.49776285)
文摘The rate of change of wave surface elevation is of much importance in ocean engineering, especially for the determination of the limitation of wave breaking. This paper gives a kind of joint distribution of wave periods and the rate of change of wave surface elevation by means of calculation of the two-order to four-order moment of the frequency spectrum based on the linear wave theory. For the first time, the distribution density function of wave periods determined by peaks is provided, and the conclusion is drawn that the rate of change of wave surface elevation obeys the Rayleigh distribution.
文摘The spatial distribution function and second moments of circular freely jointed chain are derived based on an analytical method. The circular Gauss chain, which is simple for long chains, is compared with the circular freely jointed chain, which is exact for short chains. It is shown that the Gauss chain model predicts a more compact configurational distribution than the exact freely jointed chain. The two chain models, however, become closer to each other when the chain length increases. It is found that the difference of the mean square radius of gyration calculated with these two chain models is a constant, independent of the chain length.
基金financially supported by the European Union(Grant No.234175)the Portuguese Foundation for Science and Technology(Grant No.SFRH/BD/98983/2013)
文摘The modified versions of the linear theoretical model of Longuet-Higgins （1983） are derived in this work and also compared with the laboratory experiments carried out in MAR1NTEK. The main feature of modifications is to replace the mean frequency in the formulation with the peak frequency of the wave spectrum. These two alternative forms of joint distributions are checked in three typical random sea states characterized by the initial wave steepness. In order to further explore the properties ＆these models, the associated marginal distributions of wave heights and wave periods are also researched with the observed statistics and some encouraging results are obtained.
基金co-supported by the National Natural Science Foundation of China(No.51975472)the Fundamental Scientific Research,China(No.JCKY2021205B110).
文摘In this paper,the influence of forced installation caused by a hole-location error on the 3D stress distribution and damage of a composite bolted joint is investigated.An analytical model of stress distributed on composite holes is promoted,in view of non-uniform extrusion caused by forced installation.At first,non-uniform extrusion of the hole edge caused by forced installation is analyzed.According to the contact state,expression of hole deformation is given.Then,based on Hertz theory,the maximum extrusion load is obtained with help of deformation expression.By constructing an elastic foundation beam model,3D stress distributed on a hole could be analyzed according to the extrusion load.Then,stress distribution predicted by the above analytical method is compared with that provided by FE considering composite damage.Finally,a forced installation experiment is carried out to analyze the damage distribution of the joint.Results show that a central-symmetrically distributed stress is introduced by the hole-location error.With an increment of the error,strength of composite decreases due to extrusion damage.Therefore,stress presents a concave distribution on the hole.As the hole-location error exceeding 3%,stress decreases gradually due to failure of composite.Damage of holes does not exhibit a centrosymmetric distribution.Serious damage is mainly distributed on the entrance of the hole at the lower sheet.
文摘The efficient utilization of propeller slipstream energy is important for improving the ultra-short takeoff and landing capability of Distributed Electric Propulsion(DEP)aircraft.This paper presents a quasi-three-dimensional(2.5D)high-lift wing design approach considering the three-dimensional(3D)effects of slipstream for DEP aircraft,aiming at maximizing the comprehensive lift enhancement benefit of the airframe-propulsion coupling unit.A high-precision and efficient momentum source method is adopted to simulate the slipstream effects,and the distributed propellers are replaced by a rectangular actuator disk to reduce the difficulty of grid generation and improve the grid quality.A detailed comparison of the 2.5D and 3D configurations based on the X-57 ModⅣis performed in terms of flow characteristics and computational cost to demonstrate the rationality of the above design approach.The optimization results of the high-lift wing of the X-57 ModⅣshow that the aerodynamic performance of the landing configuration is significantly improved,for instance,the lift coefficient increases by 0.094 at the angle of attack of 7°,and 0.097 at the angle of attack of 14°.This novel approach achieves efficient and effective design of high-lift wings under the influence of distributed slipstream,which has the potential to improve the design level of DEP aircraft.
文摘By analysing the scatter diagrams of characteristic the wave height H and the period T on the basis of instrumental data from various ocean wave stations, we found that the conditional expectation and standard deviation of wave period for a given wave height can be better predicted by using the equations of normal linear regression rather than by those based on the log- normal law. The latter was implied in Ochi' s bivariate log-normal model(Ochi. 1978) for the long-term joint distribution of H and T. With the expectation and standard deviation predicted by the normal linear regression equations and applying proper types of distribution, we have obtained the conditional distribution of T for given H. Then combining this conditional P(T / H) with long-term marginal distribution of the wave height P(H) we establish a new parameterized model for the long-term joint distribution P(H,T). As an example of the application of the new model we give a method for estimating wave period associated with an extreme wave height.
