The core sampling experiments were conducted after hydraulic fracturing in the three-dimensional development zone of Fuling shale gas.Six coring wells of different well types were systematically designed.Based on the ...The core sampling experiments were conducted after hydraulic fracturing in the three-dimensional development zone of Fuling shale gas.Six coring wells of different well types were systematically designed.Based on the integrated engineering technology of post-fracturing drilling,coring and monitoring of shale and the analysis of fracture source tracing,the evaluation of the fracture network after fracturing in the three-dimensional development of shale gas was conducted.The data of core fractures after fracturing indicate that three major types of fractures are formed after fracturing:natural fractures,hydraulic fractures,and fractures induced by external mechanical force,which are further classified into six subcategories:natural structural fractures,natural bedding fractures,hydraulic fractures,hydraulically activated fractures,drilling induced fractures,and fractures induced by core transportation.The forms of the artificial fracture network after fracturing are complex.Hydraulic fractures and hydraulically activated fractures interweave with each other,presenting eight forms of artificial fracture networks,among which the“一”-shaped fracture is the most common,accounting for approximately 70%of the total fractures.When the distance to the fractured wellbore is less than 35 m,the density of the artificial fracture network is relatively high;when it is 35–100 m,the density is lower;and when it is beyond 100 m,the density gradually increases.The results of the fracture tracing in the core sampling area confirm that the current fracturing technology can essentially achieve the differential transformation of the reservoir in the main area of Jiaoshiba block in Fuling.The three-layer three-dimensional development model can efficiently utilize shale gas reserves,although there is still room for improvement in the complexity and propagation uniformity of fractures.It is necessary to further optimize technologies such as close-cutting combined with temporary blocking and deflection within fractures or at fracture mouths,as well as limited flow perforation techniques,to promote the balanced initiation and extension of fractures.展开更多
In the era of AI,especially large models,the importance of open source has become increasingly prominent.First,open source allows innovation to avoid starting from scratch.Through iterative innovation,it promotes tech...In the era of AI,especially large models,the importance of open source has become increasingly prominent.First,open source allows innovation to avoid starting from scratch.Through iterative innovation,it promotes technical exchanges and learning globally.Second,resources required for large model R&D are difficult for a single institution to obtain.The evaluation of general large models also requires the participation of experts from various industries.Third,without open source collaboration,it is difficult to form a unified upper-layer software ecosystem.Therefore,open source has become an important cooperation mechanism to promote the development of AI and large models.There are two cases to illustrate how open source and international standards interact with each other.展开更多
This study systematically reviews the development history and key technological breakthroughs of large gas fields in the Ordos Basin,and summarizes the development models of three gas reservoir types,low-permeability ...This study systematically reviews the development history and key technological breakthroughs of large gas fields in the Ordos Basin,and summarizes the development models of three gas reservoir types,low-permeability carbonate,low-permeability sandstone and tight sandstone,as well as the progress in deep coal-rock gas development.The current challenges and future development directions are also discussed.Mature development models have been formed for the three representative types of gas reservoirs in the Ordos Basin:(1)Low-permeability carbonate reservoir development model featuring groove fine-scale characterization and three-dimensional vertical succession between Upper and Lower Paleozoic formations.(2)Low-permeability sandstone reservoir development model emphasizing horizontal well pressure-depletion production and vertical well pressure-controlled production.(3)Tight sandstone gas reservoir development model focusing on single-well productivity enhancement and well placement optimization.In deep coal-rock gas development,significant progress has been achieved in reservoir evaluation,sweet spot prediction,and geosteering of horizontal wells.The three types of reservoirs have entered the mid-to-late stages of the development,when the main challenge lies in accurately characterizing residual gas,evaluating secondary gas-bearing layers,and developing precise potential-tapping strategies.In contrast,for the early-stage development of deep coal-rock gas,continuous technological upgrades and cost reduction are essential to achieving economically viable large-scale development.Four key directions of future research and technological breakthroughs are proposed:(1)Utilizing dual-porosity(fracture-matrix)modeling techniques in low-permeability carbonate reservoirs to delineate the volume and distribution of remaining gas in secondary pay zones,supporting well pattern optimization and production enhancement of existing wells.(2)Integrating well-log and seismic data to characterize reservoir spatial distribution of successive strata,enhancing drilling success rates in low-permeability sandstone reservoirs.(3)Utilizing the advantages of horizontal wells to penetrate effective reservoirs laterally,achieving meter-scale quantification of small-scale single sand bodies in tight gas reservoirs,and applying high-resolution 3D geological models to clarify the distribution of remaining gas and guide well placement optimization.(4)Further strengthening the evaluation of deep coal-rock gas in terms of resource potential,well type and pattern,reservoir stimulation,single-well performance,and economic viability.展开更多
To comprehensively utilize the valuable geological map,exploration profile,borehole,and geochemical logging data and the knowledge on the formation of the Jinshan Ag-Au deposit for forecasting the exploration targets ...To comprehensively utilize the valuable geological map,exploration profile,borehole,and geochemical logging data and the knowledge on the formation of the Jinshan Ag-Au deposit for forecasting the exploration targets of concealed ore bodies,three-dimensional Mineral Prospectivity Modeling(MPM)of the deposit has been conducted using the weights-of-evidence(WofE)method.Conditional independence between evidence layers was tested,and the outline results using the prediction-volume(P-V)and Student's t-statistic methods for delineating favorable mineralization areas from continuous posterior probability map were critically compared.Four exploration targets delineated ultimately by the Student's t-statistic method for the discovery of minable ore bodies in each of the target areas were discussed in detail.The main conclusions include:(1)three-dimensional modeling of a deposit using multi-source reconnaissance data is useful for MPM in interpreting their relationships with known ore bodies;(2)WofE modeling can be used as a straightforward tool for integrating deposit model and reconnaissance data in MPM;(3)the Student's t-statistic method is more applicable in binarizing the continuous prospectivity map for exploration targeting than the PV approach;and(4)two target areas within high potential to find undiscovered ore bodies were diagnosed to guide future near-mine exploration activities of the Jinshan deposit.展开更多
The“14th Five-Year Plan”and the Long-Range Objectives Through the Year 2035 propose to strengthen the construction of strategic emerging industrial clusters,promote the deep integration of the internet,big data,arti...The“14th Five-Year Plan”and the Long-Range Objectives Through the Year 2035 propose to strengthen the construction of strategic emerging industrial clusters,promote the deep integration of the internet,big data,artificial intelligence,blockchain technology,etc.with the real economy,facilitate the development of advanced manufacturing,and consider unmanned aerial vehicles(UAVs)as an important breakthrough,providing significant opportunities for the development of the UAV industry.Therefore,this article takes the current status of the UAV industry development as a starting point,analyzes the exploration and practice of the UAV development model based on the low-altitude economy,and discusses strategic suggestions to promote the development of UAVs empowered by the low-altitude economy.Through analysis,this article aims to provide theoretical references and practical guidance for promoting the sustainable development of the UAV industry under the wave of the low-altitude economy.展开更多
The“14th Five-Year Plan”and the Long-Range Objectives Through the Year 2035 propose to strengthen the construction of strategic emerging industrial clusters,promote the deep integration of the internet,big data,arti...The“14th Five-Year Plan”and the Long-Range Objectives Through the Year 2035 propose to strengthen the construction of strategic emerging industrial clusters,promote the deep integration of the internet,big data,artificial intelligence,blockchain technology,etc.with the real economy,facilitate the development of advanced manufacturing,and consider UAVs as an important breakthrough,providing significant opportunities for the development of the UAV industry.Therefore,this article takes the current status of the UAV industry development as a starting point,analyzes the exploration and practice of the UAV development model based on the low-altitude economy,and discusses strategic suggestions to promote the development of UAVs empowered by the low-altitude economy.Through analysis,this article aims to provide theoretical reference and practical guidance for promoting the sustainable development of the UAV industry under the wave of the low-altitude economy.展开更多
Satellite Component Layout Optimization(SCLO) is crucial in satellite system design.This paper proposes a novel Satellite Three-Dimensional Component Assignment and Layout Optimization(3D-SCALO) problem tailored to en...Satellite Component Layout Optimization(SCLO) is crucial in satellite system design.This paper proposes a novel Satellite Three-Dimensional Component Assignment and Layout Optimization(3D-SCALO) problem tailored to engineering requirements, aiming to optimize satellite heat dissipation while considering constraints on static stability, 3D geometric relationships between components, and special component positions. The 3D-SCALO problem is a challenging bilevel combinatorial optimization task, involving the optimization of discrete component assignment variables in the outer layer and continuous component position variables in the inner layer,with both influencing each other. To address this issue, first, a Mixed Integer Programming(MIP) model is proposed, which reformulates the original bilevel problem into a single-level optimization problem, enabling the exploration of a more comprehensive optimization space while avoiding iterative nested optimization. Then, to model the 3D geometric relationships between components within the MIP framework, a linearized 3D Phi-function method is proposed, which handles non-overlapping and safety distance constraints between cuboid components in an explicit and effective way. Subsequently, the Finite-Rectangle Method(FRM) is proposed to manage 3D geometric constraints for complex-shaped components by approximating them with a finite set of cuboids, extending the applicability of the geometric modeling approach. Finally, the feasibility and effectiveness of the proposed MIP model are demonstrated through two numerical examples"and a real-world engineering case, which confirms its suitability for complex-shaped components and real engineering applications.展开更多
As a representative enterprise in the retail industry,MINISO takes cost leadership and product differentiation as its core strategy to compete actively in the global market.However,multi-brand retailers continue to ap...As a representative enterprise in the retail industry,MINISO takes cost leadership and product differentiation as its core strategy to compete actively in the global market.However,multi-brand retailers continue to appear in the domestic market and the existing“dollar stores”in the foreign market already have a certain number of loyal customers.Therefore,MINISO needs to understand its principles for creating,delivering,and capturing value.By strengthening its own competitive advantages,it could achieve differentiation when confronting challenges in both domestic and international markets.Based on the analysis of MINISO’s business model canvas,this paper puts forward corresponding strategic development suggestions.展开更多
Research on the distribution and development of black shales in the Lianggaoshan Formation has been deficient,which has hindered exploration for lacustrine shale oil in the Sichuan Basin.Our study characterized the we...Research on the distribution and development of black shales in the Lianggaoshan Formation has been deficient,which has hindered exploration for lacustrine shale oil in the Sichuan Basin.Our study characterized the well logging data,core samples,outcrops,and geochemistry of black shales in the Lianggaoshan Formation in the Sichuan Basin.Our analysis focused on the lake basin evolution and the migration characteristics,paleoenvironmental features,formation mechanisms,and developmental model of the black shales.The results indicated that black shales in the Lianggaoshan Formation exhibited significant lateral migration,with an overall thickening trend from east to west.Within the 1st Member of the formation,black shale occurred as a single thick layer in the eastern region that gradually thinned toward the central region.Multiple sets of shale developed within the 2nd and 3rd members,and these had lower thicknesses than the 1st Member and migrated toward central Sichuan.Paleoproductivity and terrigenous input were the main factors controlling the deposition of black shales.A semi-humid climate influenced the deposition of black shales,bringing abundant freshwater,terrigenous debris,and nutrients into the basin.Decomposition of organic matter consumed oxygen in sediment and bottom water,causing localized oxygen deficiency in the strata.展开更多
This paper focuses on rural music education in the context of rural revitalization,deeply analyzes its current resource situation,and points out that tangible resources face shortages of teachers,inappropriate textboo...This paper focuses on rural music education in the context of rural revitalization,deeply analyzes its current resource situation,and points out that tangible resources face shortages of teachers,inappropriate textbooks,and outdated teaching facilities,while intangible resources are confronted with the loss of folk music culture and the weakening of educational foundations due to cultural ecological changes.Resources are characterized by dispersion,scarcity,and inefficient utilization.In response to these difficulties,this paper proposes integration paths for teachers,textbooks,teaching facilities,and folk music culture resources.Additionally,it constructs a diversified development model that combines rural tourism with music activities,develops characteristic music education industries,and integrates rural cultural construction.Simultaneously,it identifies funding shortages and outdated concepts as major obstacles and proposes targeted strategies such as expanding funding channels and changing inherent concepts.The aim is to promote the development of rural music education and contribute to the revitalization of rural culture.展开更多
In the current settings of osteosarcoma research and drug screening,in vitro three-dimensional(3D)models,which overcome the limitations of traditional models,are favored.In in vitro 3D models,tumor microenvironment si...In the current settings of osteosarcoma research and drug screening,in vitro three-dimensional(3D)models,which overcome the limitations of traditional models,are favored.In in vitro 3D models,tumor microenvironment simulation,particularly of the mechanical microenvironment,is crucial for estimating the biological effects of a tumor.However,current in vitro osteosarcoma model construction is often limited to a single mechanical signal,which fails to simulate the diversity of osteosarcoma mechanical stimuli.In this study,we utilized embedded bioprinting technology and the multiple response properties of calcium ions in soft and hard stiffness systems with osteosarcoma cell biological functions to construct an integrated gradient biomechanical signal-tailored osteosarcoma model(IGBSTOM).We achieved this by printing a fibrinogen bioink containing calcium ions and osteosarcoma tumor spheroids within an extracellular matrix composed of methacryloylated alginate,methacryloylated gelatin,thrombin,and transglutaminase,which is rich in polysaccharides and proteins and exhibits self-healing properties.Our in vitro and in vivo studies showed that the IGBSTOM enhanced tumor stemness,proliferation,and migration,and successfully reproduced the nest-like structure of tumors,providing an in vitro research platform that is more similar to the natural tumor than the existing models.This study proposes a novel IGBSTOM construction and provides a new strategy for the clinical understanding of tumor development,drug screening,and exploration of drug resistance and metastasis mechanisms.展开更多
Currently,there are a limited number of dynamic models available for braided composite plates with large overall motions,despite the incorporation of three-dimensional(3D)braided composites into rotating blade compone...Currently,there are a limited number of dynamic models available for braided composite plates with large overall motions,despite the incorporation of three-dimensional(3D)braided composites into rotating blade components.In this paper,a dynamic model of 3D 4-directional braided composite thin plates considering braiding directions is established.Based on Kirchhoff's plate assumptions,the displacement variables of the plate are expressed.By incorporating the braiding directions into the constitutive equation of the braided composites,the dynamic model of the plate considering braiding directions is obtained.The effects of the speeds,braiding directions,and braided angles on the responses of the plate with fixed-axis rotation and translational motion,respectively,are investigated.This paper presents a dynamic theory for calculating the deformation of 3D braided composite structures undergoing both translational and rotational motions.It also provides a simulation method for investigating the dynamic behavior of non-isotropic material plates in various applications.展开更多
This paper,grounded in the theory of business model innovation,examines the Chinese People’s Health Press(人民卫生出版社)as a case study to explore strategies for innovating business models within the context of prof...This paper,grounded in the theory of business model innovation,examines the Chinese People’s Health Press(人民卫生出版社)as a case study to explore strategies for innovating business models within the context of professional publishing convergence development.The research posits that effective business model innovation in this domain necessitates a comprehensive reform of its constituent elements.It advocates for a systematic approach to reconstructing value propositions,enhancing value creation and delivery processes,and optimizing value capture mechanisms to achieve desired outcomes.展开更多
The development of digital twins for geotechnical structures necessitates the real-time updates of threedimensional(3D)virtual models(e.g.numerical finite element method(FEM)model)to accurately predict time-varying ge...The development of digital twins for geotechnical structures necessitates the real-time updates of threedimensional(3D)virtual models(e.g.numerical finite element method(FEM)model)to accurately predict time-varying geotechnical responses(e.g.consolidation settlement)in a 3D spatial domain.However,traditional 3D numerical model updating approaches are computationally prohibitive and therefore difficult to update the 3D responses in real time.To address these challenges,this study proposes a novel machine learning framework called sparse dictionary learning(T-3D-SDL)for real-time updating of time-varying 3D geotechnical responses.In T-3D-SDL,a concerned dataset(e.g.time-varying 3D settlement)is approximated as a linear superposition of dictionary atoms generated from 3D random FEM analyses.Field monitoring data are then used to identify non-trivial atoms and estimate their weights within a Bayesian framework for model updating and prediction.The proposed approach enables the real-time update of temporally varying settlements with a high 3D spatial resolution and quantified uncertainty as field monitoring data evolve.The proposed approach is illustrated using an embankment construction project.The results show that the proposed approach effectively improves settlement predictions along temporal and 3D spatial dimensions,with minimal latency(e.g.within minutes),as monitoring data appear.In addition,the proposed approach requires only a reasonably small number of 3D FEM model evaluations,avoids the use of widely adopted yet often criticized surrogate models,and effectively addresses the limitations(e.g.computational inefficiency)of existing 3D model updating approaches.展开更多
Based on the comprehensive analysis of data from petrology and mineralogy,well logging,seismic surveys,paleontology,and geochemistry,a detailed research was conducted on paleoenvironmental and paleoclimatic conditions...Based on the comprehensive analysis of data from petrology and mineralogy,well logging,seismic surveys,paleontology,and geochemistry,a detailed research was conducted on paleoenvironmental and paleoclimatic conditions,and modeling of the source rocks in the second member of the Eocene Wenchang Formation(Wen 2 Member)in the Northern Shunde Subsag at the southwestern margin of the Pearl River Mouth Basin.The Wen 2 Member hosts excellent,thick lacustrine source rocks with strong longitudinal heterogeneity and an average total organic carbon(TOC)content of over 4.9%.The Wen 2 Member can be divided into three units(I,II,III)from bottom to top.Unit I features excellent source rocks with Type I organic matters(average TOC of 5.9%)primarily sourced from lake organisms;Unit II hosts source rocks dominated by Type II2 organic matters(average TOC of 2.2%),which are originated from mixed sources dominated by terrestrial input.Unit III contains good to excellent source rocks dominated by Type II1 organic matters(average TOC of 4.9%),which are mainly contributed by lake organisms and partially by terrestrial input.Under the background of rapid subsidence and limited source supply during intense rifting period in the Eocene,excellent source rocks were developed in Wen 2 Member in the Northern Shunde Subsag under the coordinated control of warm and humid climate,volcanic activity,and deep-water reducing conditions.During the deposition of Unit I,the warm and humid climate and volcanic activity promoted the proliferation of lake algaes,primarily Granodiscus,resulting in high initial productivity,and deep-water reducing conditions enabled satisfactory preservation of organic matters.These factors jointly controlled the development and occurrence of excellent source rocks.During the deposition of Unit II,a transition from warm to cool and semi-arid paleoclimatic conditions led to a decrease in lake algaes and initial productivity.Additionally,enhanced terrestrial input and shallow-water,weakly oxidizing water conditions caused a significant dilution and decomposition of organic matters,degrading the quality of source rocks.During the deposition of Unit III,when the paleoclimatic conditions are cool and humid,Pediastrum and Botryococcus began to thrive,leading to an increase in productivity.Meanwhile,the reducing environment of semi-deep water facilitated the preservation of excellent source rocks,albeit slightly inferior to those in Unit I.The study results clarify the differential origins and development models of various source rocks in the Shunde Sag,offering valuable guidance for evaluating source rocks and selecting petroleum exploration targets in similar marginal sags.展开更多
This paper presents a hybrid model for three-dimensional Geographical Information Systems which is an integration of surface- and volume-based models. The Triangulated Irregular Network (TIN) and octree models are int...This paper presents a hybrid model for three-dimensional Geographical Information Systems which is an integration of surface- and volume-based models. The Triangulated Irregular Network (TIN) and octree models are integrated in this hybrid models. The TIN model works as a surface-based model which mainly serves for surface presentation and visualization. On the other hand, the octree encoding supports volumetric analysis. The designed data structure brings a major advantage in the three-dimensional selective retrieval. This technique increases the efficiency of three-dimensional data operation.展开更多
There are diverse products related to human buttocks, which need to be designed, manufactured and evaluated with 3D buttock model. The 3D buttock model used in present research field is just simple approximate model s...There are diverse products related to human buttocks, which need to be designed, manufactured and evaluated with 3D buttock model. The 3D buttock model used in present research field is just simple approximate model similar to human buttocks. The 3D buttock percentile model is highly desired in the ergonomics design and evaluation for these products. So far, there is no research on the percentile sizing system of human 3D buttock model. So the purpose of this paper is to develop a new method for building three-dimensional buttock percentile model in computer system. After scanning the 3D shape of buttocks, the cloud data of 3D points is imported into the reverse engineering software（Geomagic） for the reconstructing of the buttock surface model. Five characteristic dimensions of the buttock are measured through mark-points after models being imported into engineering software CATIA. A series of space points are obtained by the intersecting of the cutting slices and 3D buttock surface model, and then are ordered based on the sequence number of the horizontal and vertical slices. The 1st, 5th, 50 th, 95 th, 99 th percentile values of the five dimensions and the spatial coordinate values of the space points are obtained, and used to reconstruct percentile buttock models. This research proposes a establishing method of percentile sizing system of buttock 3D model based on the percentile values of the ischial tuberosities diameter, the distances from margin to ischial tuberosity and the space coordinates value of coordinate points, for establishing the Nth percentile 3D buttock model and every special buttock types model. The proposed method also serves as a useful guidance for the other 3D percentile models establishment for other part in human body with characteristic points.展开更多
We modified a three-dimensional cerebral aneurysm model for surgical simulation and educational demonstration. Novel models are made showing perforating arteries arising around the aneurysm. Information about perforat...We modified a three-dimensional cerebral aneurysm model for surgical simulation and educational demonstration. Novel models are made showing perforating arteries arising around the aneurysm. Information about perforating arteries is difficult to obtain from individual radiological data sets. Perforators are therefore reproduced based on previous anatomical knowledge instead of personal data. Due to their fragility, perforating arteries are attached to the model using hard materials. At the same time, hollow models are useful for practicing clip application. We made a model for practicing the application of fenestrated clips for paraclinoid internal carotid aneurysms. Situating aneurysm models in the fissure of a brain model simulates the real surgical field and is helpful for educational demonstrations.展开更多
An integration processing system of three-dimensional laser scanning information visualization in goaf was developed. It is provided with multiple functions, such as laser scanning information management for goaf, clo...An integration processing system of three-dimensional laser scanning information visualization in goaf was developed. It is provided with multiple functions, such as laser scanning information management for goaf, cloud data de-noising optimization, construction, display and operation of three-dimensional model, model editing, profile generation, calculation of goaf volume and roof area, Boolean calculation among models and interaction with the third party soft ware. Concerning this system with a concise interface, plentiful data input/output interfaces, it is featured with high integration, simple and convenient operations of applications. According to practice, in addition to being well-adapted, this system is favorably reliable and stable.展开更多
This study investigates the coordination between regional economic growth and ecological sustainability within the context of high-quality town economy development.To address the challenges of balancing economic expan...This study investigates the coordination between regional economic growth and ecological sustainability within the context of high-quality town economy development.To address the challenges of balancing economic expansion with environmental protection,a comprehensive evaluation index system is constructed,encompassing two key dimensions:regional economy and ecological environment.Using panel data from 2013 to 2022,the coupling coordination degree model is employed to quantify the interactions and synergy between these dimensions.Additionally,spatial econometric methods are applied to calculate both global and local Moran’s Index,revealing spatial clustering patterns,regional disparities,and heterogeneity.The relative development model further identifies critical factors influencing regional coordination,with a focus on the lagging development of basic infrastructure and public services.The findings demonstrate a positive temporal trend toward improved regional coordination and reduced development gaps,with a spatial pattern characterized by higher coupling degrees in eastern and central regions compared to western areas.Based on these results,this study proposes actionable strategies to enhance coordinated development,emphasizing ecological conservation,the establishment of green production and consumption systems,ecological restoration,and strengthened municipal collaboration.This revised abstract emphasizes the study’s purpose,methods,and key findings more clearly while maintaining a professional and concise tone.Finally,based on the above analysis results,the corresponding coordinated development suggestions of regional economy and ecological environment are given from the aspects of ecological environment protection measures,green production and consumption system construction,ecological environment restoration and municipal coordination.展开更多
文摘The core sampling experiments were conducted after hydraulic fracturing in the three-dimensional development zone of Fuling shale gas.Six coring wells of different well types were systematically designed.Based on the integrated engineering technology of post-fracturing drilling,coring and monitoring of shale and the analysis of fracture source tracing,the evaluation of the fracture network after fracturing in the three-dimensional development of shale gas was conducted.The data of core fractures after fracturing indicate that three major types of fractures are formed after fracturing:natural fractures,hydraulic fractures,and fractures induced by external mechanical force,which are further classified into six subcategories:natural structural fractures,natural bedding fractures,hydraulic fractures,hydraulically activated fractures,drilling induced fractures,and fractures induced by core transportation.The forms of the artificial fracture network after fracturing are complex.Hydraulic fractures and hydraulically activated fractures interweave with each other,presenting eight forms of artificial fracture networks,among which the“一”-shaped fracture is the most common,accounting for approximately 70%of the total fractures.When the distance to the fractured wellbore is less than 35 m,the density of the artificial fracture network is relatively high;when it is 35–100 m,the density is lower;and when it is beyond 100 m,the density gradually increases.The results of the fracture tracing in the core sampling area confirm that the current fracturing technology can essentially achieve the differential transformation of the reservoir in the main area of Jiaoshiba block in Fuling.The three-layer three-dimensional development model can efficiently utilize shale gas reserves,although there is still room for improvement in the complexity and propagation uniformity of fractures.It is necessary to further optimize technologies such as close-cutting combined with temporary blocking and deflection within fractures or at fracture mouths,as well as limited flow perforation techniques,to promote the balanced initiation and extension of fractures.
文摘In the era of AI,especially large models,the importance of open source has become increasingly prominent.First,open source allows innovation to avoid starting from scratch.Through iterative innovation,it promotes technical exchanges and learning globally.Second,resources required for large model R&D are difficult for a single institution to obtain.The evaluation of general large models also requires the participation of experts from various industries.Third,without open source collaboration,it is difficult to form a unified upper-layer software ecosystem.Therefore,open source has become an important cooperation mechanism to promote the development of AI and large models.There are two cases to illustrate how open source and international standards interact with each other.
文摘This study systematically reviews the development history and key technological breakthroughs of large gas fields in the Ordos Basin,and summarizes the development models of three gas reservoir types,low-permeability carbonate,low-permeability sandstone and tight sandstone,as well as the progress in deep coal-rock gas development.The current challenges and future development directions are also discussed.Mature development models have been formed for the three representative types of gas reservoirs in the Ordos Basin:(1)Low-permeability carbonate reservoir development model featuring groove fine-scale characterization and three-dimensional vertical succession between Upper and Lower Paleozoic formations.(2)Low-permeability sandstone reservoir development model emphasizing horizontal well pressure-depletion production and vertical well pressure-controlled production.(3)Tight sandstone gas reservoir development model focusing on single-well productivity enhancement and well placement optimization.In deep coal-rock gas development,significant progress has been achieved in reservoir evaluation,sweet spot prediction,and geosteering of horizontal wells.The three types of reservoirs have entered the mid-to-late stages of the development,when the main challenge lies in accurately characterizing residual gas,evaluating secondary gas-bearing layers,and developing precise potential-tapping strategies.In contrast,for the early-stage development of deep coal-rock gas,continuous technological upgrades and cost reduction are essential to achieving economically viable large-scale development.Four key directions of future research and technological breakthroughs are proposed:(1)Utilizing dual-porosity(fracture-matrix)modeling techniques in low-permeability carbonate reservoirs to delineate the volume and distribution of remaining gas in secondary pay zones,supporting well pattern optimization and production enhancement of existing wells.(2)Integrating well-log and seismic data to characterize reservoir spatial distribution of successive strata,enhancing drilling success rates in low-permeability sandstone reservoirs.(3)Utilizing the advantages of horizontal wells to penetrate effective reservoirs laterally,achieving meter-scale quantification of small-scale single sand bodies in tight gas reservoirs,and applying high-resolution 3D geological models to clarify the distribution of remaining gas and guide well placement optimization.(4)Further strengthening the evaluation of deep coal-rock gas in terms of resource potential,well type and pattern,reservoir stimulation,single-well performance,and economic viability.
基金financially supported by the Ministry of Science and Technology of China(Nos.2022YFF0801201,2021YFC2900300)the National Natural Science Foundation of China(Nos.41872245,U1911202)the Guangdong Basic and Applied Basic Research Foundation(No.2020A1515010666)。
文摘To comprehensively utilize the valuable geological map,exploration profile,borehole,and geochemical logging data and the knowledge on the formation of the Jinshan Ag-Au deposit for forecasting the exploration targets of concealed ore bodies,three-dimensional Mineral Prospectivity Modeling(MPM)of the deposit has been conducted using the weights-of-evidence(WofE)method.Conditional independence between evidence layers was tested,and the outline results using the prediction-volume(P-V)and Student's t-statistic methods for delineating favorable mineralization areas from continuous posterior probability map were critically compared.Four exploration targets delineated ultimately by the Student's t-statistic method for the discovery of minable ore bodies in each of the target areas were discussed in detail.The main conclusions include:(1)three-dimensional modeling of a deposit using multi-source reconnaissance data is useful for MPM in interpreting their relationships with known ore bodies;(2)WofE modeling can be used as a straightforward tool for integrating deposit model and reconnaissance data in MPM;(3)the Student's t-statistic method is more applicable in binarizing the continuous prospectivity map for exploration targeting than the PV approach;and(4)two target areas within high potential to find undiscovered ore bodies were diagnosed to guide future near-mine exploration activities of the Jinshan deposit.
文摘The“14th Five-Year Plan”and the Long-Range Objectives Through the Year 2035 propose to strengthen the construction of strategic emerging industrial clusters,promote the deep integration of the internet,big data,artificial intelligence,blockchain technology,etc.with the real economy,facilitate the development of advanced manufacturing,and consider unmanned aerial vehicles(UAVs)as an important breakthrough,providing significant opportunities for the development of the UAV industry.Therefore,this article takes the current status of the UAV industry development as a starting point,analyzes the exploration and practice of the UAV development model based on the low-altitude economy,and discusses strategic suggestions to promote the development of UAVs empowered by the low-altitude economy.Through analysis,this article aims to provide theoretical references and practical guidance for promoting the sustainable development of the UAV industry under the wave of the low-altitude economy.
文摘The“14th Five-Year Plan”and the Long-Range Objectives Through the Year 2035 propose to strengthen the construction of strategic emerging industrial clusters,promote the deep integration of the internet,big data,artificial intelligence,blockchain technology,etc.with the real economy,facilitate the development of advanced manufacturing,and consider UAVs as an important breakthrough,providing significant opportunities for the development of the UAV industry.Therefore,this article takes the current status of the UAV industry development as a starting point,analyzes the exploration and practice of the UAV development model based on the low-altitude economy,and discusses strategic suggestions to promote the development of UAVs empowered by the low-altitude economy.Through analysis,this article aims to provide theoretical reference and practical guidance for promoting the sustainable development of the UAV industry under the wave of the low-altitude economy.
基金supported by the National Natural Science Foundation of China(No.92371206)the Postgraduate Scientific Research Innovation Project of Hunan Province,China(No.CX2023063).
文摘Satellite Component Layout Optimization(SCLO) is crucial in satellite system design.This paper proposes a novel Satellite Three-Dimensional Component Assignment and Layout Optimization(3D-SCALO) problem tailored to engineering requirements, aiming to optimize satellite heat dissipation while considering constraints on static stability, 3D geometric relationships between components, and special component positions. The 3D-SCALO problem is a challenging bilevel combinatorial optimization task, involving the optimization of discrete component assignment variables in the outer layer and continuous component position variables in the inner layer,with both influencing each other. To address this issue, first, a Mixed Integer Programming(MIP) model is proposed, which reformulates the original bilevel problem into a single-level optimization problem, enabling the exploration of a more comprehensive optimization space while avoiding iterative nested optimization. Then, to model the 3D geometric relationships between components within the MIP framework, a linearized 3D Phi-function method is proposed, which handles non-overlapping and safety distance constraints between cuboid components in an explicit and effective way. Subsequently, the Finite-Rectangle Method(FRM) is proposed to manage 3D geometric constraints for complex-shaped components by approximating them with a finite set of cuboids, extending the applicability of the geometric modeling approach. Finally, the feasibility and effectiveness of the proposed MIP model are demonstrated through two numerical examples"and a real-world engineering case, which confirms its suitability for complex-shaped components and real engineering applications.
文摘As a representative enterprise in the retail industry,MINISO takes cost leadership and product differentiation as its core strategy to compete actively in the global market.However,multi-brand retailers continue to appear in the domestic market and the existing“dollar stores”in the foreign market already have a certain number of loyal customers.Therefore,MINISO needs to understand its principles for creating,delivering,and capturing value.By strengthening its own competitive advantages,it could achieve differentiation when confronting challenges in both domestic and international markets.Based on the analysis of MINISO’s business model canvas,this paper puts forward corresponding strategic development suggestions.
基金funded by Science and Technology Cooperation Project of the CNPC-SWPU Innovation Alliance(2020CX050103).
文摘Research on the distribution and development of black shales in the Lianggaoshan Formation has been deficient,which has hindered exploration for lacustrine shale oil in the Sichuan Basin.Our study characterized the well logging data,core samples,outcrops,and geochemistry of black shales in the Lianggaoshan Formation in the Sichuan Basin.Our analysis focused on the lake basin evolution and the migration characteristics,paleoenvironmental features,formation mechanisms,and developmental model of the black shales.The results indicated that black shales in the Lianggaoshan Formation exhibited significant lateral migration,with an overall thickening trend from east to west.Within the 1st Member of the formation,black shale occurred as a single thick layer in the eastern region that gradually thinned toward the central region.Multiple sets of shale developed within the 2nd and 3rd members,and these had lower thicknesses than the 1st Member and migrated toward central Sichuan.Paleoproductivity and terrigenous input were the main factors controlling the deposition of black shales.A semi-humid climate influenced the deposition of black shales,bringing abundant freshwater,terrigenous debris,and nutrients into the basin.Decomposition of organic matter consumed oxygen in sediment and bottom water,causing localized oxygen deficiency in the strata.
文摘This paper focuses on rural music education in the context of rural revitalization,deeply analyzes its current resource situation,and points out that tangible resources face shortages of teachers,inappropriate textbooks,and outdated teaching facilities,while intangible resources are confronted with the loss of folk music culture and the weakening of educational foundations due to cultural ecological changes.Resources are characterized by dispersion,scarcity,and inefficient utilization.In response to these difficulties,this paper proposes integration paths for teachers,textbooks,teaching facilities,and folk music culture resources.Additionally,it constructs a diversified development model that combines rural tourism with music activities,develops characteristic music education industries,and integrates rural cultural construction.Simultaneously,it identifies funding shortages and outdated concepts as major obstacles and proposes targeted strategies such as expanding funding channels and changing inherent concepts.The aim is to promote the development of rural music education and contribute to the revitalization of rural culture.
基金appreciate financial support from the National Key R&D Program of China(No.2022YFA1104600)2022 Lingang Laboratory“Seeking Outstanding Youth Program”Open Project(No.LGQS-202206-04)+3 种基金Shanghai Ninth People’s Hospital–Shanghai Jiao Tong University School of Medicine–Shanghai University of Science and Technology Cross-funded Collaborative Program(No.JYJC202233)the National Natural Science Foundation of China(No.82372377)Biomaterials and Regenerative Medicine Institute Cooperative Research Project by Shanghai Jiao Tong University School of Medicine(No.2022LHBO8),Shanghai Key Laboratory of Orthopaedic Implants,Department of Orthopaedics by Shanghai Ninth People’s Hospital–Shanghai Jiao Tong University School of Medicine(No.KFKT202206),the Key R&D Program of Jiangsu Province Social Development Project(No.BE2022708)the Project of Shanghai Science and Technology Commission(No.22015820100).
文摘In the current settings of osteosarcoma research and drug screening,in vitro three-dimensional(3D)models,which overcome the limitations of traditional models,are favored.In in vitro 3D models,tumor microenvironment simulation,particularly of the mechanical microenvironment,is crucial for estimating the biological effects of a tumor.However,current in vitro osteosarcoma model construction is often limited to a single mechanical signal,which fails to simulate the diversity of osteosarcoma mechanical stimuli.In this study,we utilized embedded bioprinting technology and the multiple response properties of calcium ions in soft and hard stiffness systems with osteosarcoma cell biological functions to construct an integrated gradient biomechanical signal-tailored osteosarcoma model(IGBSTOM).We achieved this by printing a fibrinogen bioink containing calcium ions and osteosarcoma tumor spheroids within an extracellular matrix composed of methacryloylated alginate,methacryloylated gelatin,thrombin,and transglutaminase,which is rich in polysaccharides and proteins and exhibits self-healing properties.Our in vitro and in vivo studies showed that the IGBSTOM enhanced tumor stemness,proliferation,and migration,and successfully reproduced the nest-like structure of tumors,providing an in vitro research platform that is more similar to the natural tumor than the existing models.This study proposes a novel IGBSTOM construction and provides a new strategy for the clinical understanding of tumor development,drug screening,and exploration of drug resistance and metastasis mechanisms.
基金Project supported by the National Natural Science Foundation of China(Nos.12372071 and 12372070)the Aeronautical Science Fund of China(No.2022Z055052001)the Foundation of China Scholarship Council(No.202306830079)。
文摘Currently,there are a limited number of dynamic models available for braided composite plates with large overall motions,despite the incorporation of three-dimensional(3D)braided composites into rotating blade components.In this paper,a dynamic model of 3D 4-directional braided composite thin plates considering braiding directions is established.Based on Kirchhoff's plate assumptions,the displacement variables of the plate are expressed.By incorporating the braiding directions into the constitutive equation of the braided composites,the dynamic model of the plate considering braiding directions is obtained.The effects of the speeds,braiding directions,and braided angles on the responses of the plate with fixed-axis rotation and translational motion,respectively,are investigated.This paper presents a dynamic theory for calculating the deformation of 3D braided composite structures undergoing both translational and rotational motions.It also provides a simulation method for investigating the dynamic behavior of non-isotropic material plates in various applications.
文摘This paper,grounded in the theory of business model innovation,examines the Chinese People’s Health Press(人民卫生出版社)as a case study to explore strategies for innovating business models within the context of professional publishing convergence development.The research posits that effective business model innovation in this domain necessitates a comprehensive reform of its constituent elements.It advocates for a systematic approach to reconstructing value propositions,enhancing value creation and delivery processes,and optimizing value capture mechanisms to achieve desired outcomes.
基金supported by a grant from the Research Grant Council of Hong Kong Special Administrative Region(Project No.11207724).
文摘The development of digital twins for geotechnical structures necessitates the real-time updates of threedimensional(3D)virtual models(e.g.numerical finite element method(FEM)model)to accurately predict time-varying geotechnical responses(e.g.consolidation settlement)in a 3D spatial domain.However,traditional 3D numerical model updating approaches are computationally prohibitive and therefore difficult to update the 3D responses in real time.To address these challenges,this study proposes a novel machine learning framework called sparse dictionary learning(T-3D-SDL)for real-time updating of time-varying 3D geotechnical responses.In T-3D-SDL,a concerned dataset(e.g.time-varying 3D settlement)is approximated as a linear superposition of dictionary atoms generated from 3D random FEM analyses.Field monitoring data are then used to identify non-trivial atoms and estimate their weights within a Bayesian framework for model updating and prediction.The proposed approach enables the real-time update of temporally varying settlements with a high 3D spatial resolution and quantified uncertainty as field monitoring data evolve.The proposed approach is illustrated using an embankment construction project.The results show that the proposed approach effectively improves settlement predictions along temporal and 3D spatial dimensions,with minimal latency(e.g.within minutes),as monitoring data appear.In addition,the proposed approach requires only a reasonably small number of 3D FEM model evaluations,avoids the use of widely adopted yet often criticized surrogate models,and effectively addresses the limitations(e.g.computational inefficiency)of existing 3D model updating approaches.
基金Supported by the Research Project of China National Offshore Oil Corporation(SCKY-2023-HN-3)。
文摘Based on the comprehensive analysis of data from petrology and mineralogy,well logging,seismic surveys,paleontology,and geochemistry,a detailed research was conducted on paleoenvironmental and paleoclimatic conditions,and modeling of the source rocks in the second member of the Eocene Wenchang Formation(Wen 2 Member)in the Northern Shunde Subsag at the southwestern margin of the Pearl River Mouth Basin.The Wen 2 Member hosts excellent,thick lacustrine source rocks with strong longitudinal heterogeneity and an average total organic carbon(TOC)content of over 4.9%.The Wen 2 Member can be divided into three units(I,II,III)from bottom to top.Unit I features excellent source rocks with Type I organic matters(average TOC of 5.9%)primarily sourced from lake organisms;Unit II hosts source rocks dominated by Type II2 organic matters(average TOC of 2.2%),which are originated from mixed sources dominated by terrestrial input.Unit III contains good to excellent source rocks dominated by Type II1 organic matters(average TOC of 4.9%),which are mainly contributed by lake organisms and partially by terrestrial input.Under the background of rapid subsidence and limited source supply during intense rifting period in the Eocene,excellent source rocks were developed in Wen 2 Member in the Northern Shunde Subsag under the coordinated control of warm and humid climate,volcanic activity,and deep-water reducing conditions.During the deposition of Unit I,the warm and humid climate and volcanic activity promoted the proliferation of lake algaes,primarily Granodiscus,resulting in high initial productivity,and deep-water reducing conditions enabled satisfactory preservation of organic matters.These factors jointly controlled the development and occurrence of excellent source rocks.During the deposition of Unit II,a transition from warm to cool and semi-arid paleoclimatic conditions led to a decrease in lake algaes and initial productivity.Additionally,enhanced terrestrial input and shallow-water,weakly oxidizing water conditions caused a significant dilution and decomposition of organic matters,degrading the quality of source rocks.During the deposition of Unit III,when the paleoclimatic conditions are cool and humid,Pediastrum and Botryococcus began to thrive,leading to an increase in productivity.Meanwhile,the reducing environment of semi-deep water facilitated the preservation of excellent source rocks,albeit slightly inferior to those in Unit I.The study results clarify the differential origins and development models of various source rocks in the Shunde Sag,offering valuable guidance for evaluating source rocks and selecting petroleum exploration targets in similar marginal sags.
文摘This paper presents a hybrid model for three-dimensional Geographical Information Systems which is an integration of surface- and volume-based models. The Triangulated Irregular Network (TIN) and octree models are integrated in this hybrid models. The TIN model works as a surface-based model which mainly serves for surface presentation and visualization. On the other hand, the octree encoding supports volumetric analysis. The designed data structure brings a major advantage in the three-dimensional selective retrieval. This technique increases the efficiency of three-dimensional data operation.
文摘There are diverse products related to human buttocks, which need to be designed, manufactured and evaluated with 3D buttock model. The 3D buttock model used in present research field is just simple approximate model similar to human buttocks. The 3D buttock percentile model is highly desired in the ergonomics design and evaluation for these products. So far, there is no research on the percentile sizing system of human 3D buttock model. So the purpose of this paper is to develop a new method for building three-dimensional buttock percentile model in computer system. After scanning the 3D shape of buttocks, the cloud data of 3D points is imported into the reverse engineering software（Geomagic） for the reconstructing of the buttock surface model. Five characteristic dimensions of the buttock are measured through mark-points after models being imported into engineering software CATIA. A series of space points are obtained by the intersecting of the cutting slices and 3D buttock surface model, and then are ordered based on the sequence number of the horizontal and vertical slices. The 1st, 5th, 50 th, 95 th, 99 th percentile values of the five dimensions and the spatial coordinate values of the space points are obtained, and used to reconstruct percentile buttock models. This research proposes a establishing method of percentile sizing system of buttock 3D model based on the percentile values of the ischial tuberosities diameter, the distances from margin to ischial tuberosity and the space coordinates value of coordinate points, for establishing the Nth percentile 3D buttock model and every special buttock types model. The proposed method also serves as a useful guidance for the other 3D percentile models establishment for other part in human body with characteristic points.
文摘We modified a three-dimensional cerebral aneurysm model for surgical simulation and educational demonstration. Novel models are made showing perforating arteries arising around the aneurysm. Information about perforating arteries is difficult to obtain from individual radiological data sets. Perforators are therefore reproduced based on previous anatomical knowledge instead of personal data. Due to their fragility, perforating arteries are attached to the model using hard materials. At the same time, hollow models are useful for practicing clip application. We made a model for practicing the application of fenestrated clips for paraclinoid internal carotid aneurysms. Situating aneurysm models in the fissure of a brain model simulates the real surgical field and is helpful for educational demonstrations.
基金Project(51274250)supported by the National Natural Science Foundation of ChinaProject(2012BAK09B02-05)supported by the National Key Technology R&D Program during the 12th Five-year Plan of China
文摘An integration processing system of three-dimensional laser scanning information visualization in goaf was developed. It is provided with multiple functions, such as laser scanning information management for goaf, cloud data de-noising optimization, construction, display and operation of three-dimensional model, model editing, profile generation, calculation of goaf volume and roof area, Boolean calculation among models and interaction with the third party soft ware. Concerning this system with a concise interface, plentiful data input/output interfaces, it is featured with high integration, simple and convenient operations of applications. According to practice, in addition to being well-adapted, this system is favorably reliable and stable.
基金support from Guangdong Science and Technology(20230505)Guangdong Provincial Philosophy and Social Science Planning Project(GD20SQ25)Guangdong Provincial Special Fund for Science and Technology Innovation Strategy in 2024(Cultivation of College Students’Science and Technology Innovation)(pdjh2024a391)during preparation of this manuscript.
文摘This study investigates the coordination between regional economic growth and ecological sustainability within the context of high-quality town economy development.To address the challenges of balancing economic expansion with environmental protection,a comprehensive evaluation index system is constructed,encompassing two key dimensions:regional economy and ecological environment.Using panel data from 2013 to 2022,the coupling coordination degree model is employed to quantify the interactions and synergy between these dimensions.Additionally,spatial econometric methods are applied to calculate both global and local Moran’s Index,revealing spatial clustering patterns,regional disparities,and heterogeneity.The relative development model further identifies critical factors influencing regional coordination,with a focus on the lagging development of basic infrastructure and public services.The findings demonstrate a positive temporal trend toward improved regional coordination and reduced development gaps,with a spatial pattern characterized by higher coupling degrees in eastern and central regions compared to western areas.Based on these results,this study proposes actionable strategies to enhance coordinated development,emphasizing ecological conservation,the establishment of green production and consumption systems,ecological restoration,and strengthened municipal collaboration.This revised abstract emphasizes the study’s purpose,methods,and key findings more clearly while maintaining a professional and concise tone.Finally,based on the above analysis results,the corresponding coordinated development suggestions of regional economy and ecological environment are given from the aspects of ecological environment protection measures,green production and consumption system construction,ecological environment restoration and municipal coordination.
