Some techniques such as die surface description, contact judgement algorithm and remeshing are proposed to improve the robustness of the numerical solution. Based on these techniques, a three-dimensional rigid-plastic...Some techniques such as die surface description, contact judgement algorithm and remeshing are proposed to improve the robustness of the numerical solution. Based on these techniques, a three-dimensional rigid-plastic FEM code has been developed. Isothermal forging process of a cylindrical housing has been simulated. The simulation results show that the given techniques and the FEM code are reasonable and feasible for three-dimensional bulk forming processes.展开更多
The estimation of shear strength of rock mass discontinuity is always a focal, but difficult, problem in the field of geotechnical engineering. Considering the disadvantages and limitation of exist- ing estimation met...The estimation of shear strength of rock mass discontinuity is always a focal, but difficult, problem in the field of geotechnical engineering. Considering the disadvantages and limitation of exist- ing estimation methods, a new approach based on the shadow area percentage （SAP） that can be used to quantify surface roughness is proposed in this article. Firstly, by the help of laser scanning technique, the three-dimensional model of the surface of rock discontinuity was established. Secondly, a light source was simulated, and there would be some shadows produced on the model surface. Thirdly, to obtain the value of SAP of each specimen, the shadow detection technique was introduced for use. Fourthly, compared with the result from direct shear testing and based on statistics, an empirical for- mula was found among SAP, normal stress, and shear strength. Data of Yujian （~ River were used as an example, and the following conclusions have been made. （1） In the case of equal normal stress, the peak shear stress is positively proportional to the SAP. （2） The formula for estimating was derived, and the predictions of peak-shear strength made with this equation well agreed with the experimental re- suits obtained in laboratory tests.展开更多
This study is aimed to explore the clinical application of the guiding template designed by three-dimensional printing data for the insertion of sacroiliac screws.A retrospective study of 7 cases (from July 2016 to De...This study is aimed to explore the clinical application of the guiding template designed by three-dimensional printing data for the insertion of sacroiliac screws.A retrospective study of 7 cases (from July 2016 to December 2016),in which the guiding template printed by the three-dimensional printing technique was used for the insertion of sacroiliac screws of patients with posterior ring injuries of pelvis,was performed.Totally,4 males and 3 females were included in template group,aged from 38to 65years old (mean 50.86±8.90).Of them,5 had sacral fractures (3 with Denis type Ⅰ and 2 with type Ⅱ)and 2 the separation of sacroiliac joint.Guiding templates were firstly made by the three-dimensional printing technique based on the pre-operative CT data. Surgical operations for the stabilization of pelvic ring by applying the guiding templates were carried out.A group of 8 patients with sacroiliac injuries treated by percutaneous sacroiliac screws were analyzed as a control group retrospectively.The time of each screw insertion,volume of intra-operative blood loss,and the exposure to X ray were analyzed and the Matta's radiological criteria were used to evaluate the reduction quality.The Majeed score was used to evaluate postoperative living quality.The visual analogue scale (VAS)was applied at different time points to judge pain relief of coccydynia.All the 7 patients in the template group were closely followed up radiographically and clinically for 14 to 20 months,mean (16.57±2.44)months.Totally 9 sacroiliac screws for the S 1 and S2 vertebra were inserted in the 7 patients.The time length for each screw insertion ranged from 450 to 870 s,mean (690.56±135.68)s,and the number of times of exposure to X ray were 4 to 8,mean (5.78±1.20).The intra-operative blood loss ranged from 45to 120 mL,mean (75±23.32)mL.According to Matta's radiology criteria,the fracture and dislocation reduction were excellent in 6cases and good in 1.The pre-operative VAS score ranged from 5.2 to 8.1,mean (7.13±1.00).The average one-week/six-month post-operative VAS was (5.33±0.78)and (1.33±0.66),respectively (P<0.05 when compared with pre-operative VAS).The 12-month post-operative Majeed score ranged from 86 to 92,mean (90.29±2.21).The three-dimensional printed guiding template for sacroiliac screw insertion,which could significantly shorten the operation time,provide a satisfied outcome of the stabilization of the pelvic ring,and protect doctors and patients from X-ray exposure,might be a practical and valuable new clinical technique.展开更多
This study was carried out in the University of Campinas to study the three-dimensional reconstruction of grape bunches through the application of the Moire technique as an alternative and innovative method, using low...This study was carried out in the University of Campinas to study the three-dimensional reconstruction of grape bunches through the application of the Moire technique as an alternative and innovative method, using low-cost equipment for data acquisition. This study proposed the three-dimensional visualization of grapes and topography on Xi axes through the Moire projection technique. The artificial grapes with a 20 cm long bunch and 18.45 mm average diameter for each grape were used. A projector was used to generate a grid with light and dark lines. The grape bunch was placed on a holder, illuminated by a sinusoidal grid and photographed. After processing the images, a three-dimensional map of the fruit and topography on Xi axes were obtained. The three-dimensional fruit observation allows the visualization of the higher and lower regions of the three-dimensional configuration through a color map. This result makes it possible to obtain size and shape of the grape bunch, allowing for the process automation of product selection and classification.展开更多
Objective:This study investigated the effect of proximal contact strength on the three-dimensional displacements of cantilever fixed partial denture(CFPD) under vertically concentrated loading with digital laser speck...Objective:This study investigated the effect of proximal contact strength on the three-dimensional displacements of cantilever fixed partial denture(CFPD) under vertically concentrated loading with digital laser speckle(DLS) technique.Methods:Fresh mandible of beagle dog was used to establish the implant-supported CFPD for specimen.DLS technique was employed for measuring the three-dimensional displacement of the prosthesis under vertically concentrated loading ranging from 200 to 3 000 g.The effect of the contact tightness on the displacement of CFPD was investigated by means of changing the contact tightness.Results:When an axial concentrated loading was exerted on the pontic of the implant-supported CFPD,the displacement of the CFPD was the greatest.The displacement of the prosthesis decreased with the increase of contact strength.When the contact strength was 0,0.95,and 3.25 N,the displacement of the buccolingual direction was smaller than that of the mesiodistal direction but greater than that of the occlusogingival direction.When the force on the contact area was 6.50 N,the mesiodistal displacement of the prosthesis was the biggest while the buccolingual displacement was the smallest.Conclusions:The implant supported CFPD is an effective therapy for fully or partially edentulous patients.The restoration of the contact area and the selection of the appropriate contact strength can reduce the displacement of the CFPD,and get a better stress distribution.The most appropriate force value is 3.25 N in this study.展开更多
Heart diseases remain the top threat to human health,and the treatment of heart diseases changes with each passing day.Convincing evidence shows that three-dimensional(3D)printing allows for a more precise understandi...Heart diseases remain the top threat to human health,and the treatment of heart diseases changes with each passing day.Convincing evidence shows that three-dimensional(3D)printing allows for a more precise understanding of the complex anatomy associated with various heart diseases.In addition,3D-printed models of cardiac diseases may serve as effective educational tools and for hands-on simulation of surgical interventions.We introduce examples of the clinical applications of different types of 3D printing based on specific cases and clinical application scenarios of 3D printing in treating heart diseases.We also discuss the limitations and clinically unmet needs of 3D printing in this context.展开更多
A three-dimensional, first order turbulence closure, thermal diffusion model is described in this paper. The governing equations consist of an equation of continuity, three components of momentum, conservation equatio...A three-dimensional, first order turbulence closure, thermal diffusion model is described in this paper. The governing equations consist of an equation of continuity, three components of momentum, conservation equations for salt, temperature and subgridscale energy, and an equation of state. In the model, according to the hypothesis of Kolmogorov and Prandtl, the viscosity coefficient of turbulent flow of homogeneous fluid is related to the local turbulent energy, and the horizontal and vertical exchange coefficients of mass, heat and momentum are computed with the introduction of subgridscale turbulence energy. The governing equations are solved by finite difference techniques. This model is applied to the Jiaozhou bay to predict thermal pollution by the Huangdao power plant. An instantaneous tidal current field is computed, then the distribution of temperature increment is predicted, and finally the effect of wind stress on thermal discharge is discussed.展开更多
The most common methods for three-dimensional reconstruction of peripheral nerve fascicles include histological and radiology techniques. Histological techniques have many drawbacks including an enormous manual worklo...The most common methods for three-dimensional reconstruction of peripheral nerve fascicles include histological and radiology techniques. Histological techniques have many drawbacks including an enormous manual workload and poor image registration. Micro-magnetic resonance imaging（Micro-MRI）, an emerging radiology technique, has been used to report results in the brain, liver and tumor tissues. However, micro-MRI usage for obtaining intraneural structures has not been reported. The aim of this study was to present a new imaging method for three-dimensional reconstruction of peripheral nerve fascicles by ~1T micro-MRI. Freshly harvested sciatic nerve samples from an amputated limb were divided into four groups. Two different scanning conditions（Mannerist Solution/GD-DTPA contrast agent, distilled water） were selected, and both T1 and T2 phases programmed for each scanning condition. Three clinical surgeons evaluated the quality of the images via a standardized scale. Moreover, to analyze deformation of the two-dimensional image, the nerve diameter and total area of the micro-MRI images were compared after hematoxylin-eosin staining. The results show that rapid micro-MRI imaging method can be used for three-dimensional reconstruction of the fascicle structure. Nerve sample immersed in contrast agent（Mannerist Solution/GD-DTPA） and scanned in the T1 phase was the best. Moreover, the nerve sample was scanned freshly and can be recycled for other procedures. MRI images show better stability and smaller deformation compared with histological images. In conclusion, micro-MRI provides a feasible and rapid method for three-dimensional reconstruction of peripheral nerve fascicles, which can clearly show the internal structure of the peripheral nerve.展开更多
A new collapse model of the trapdoors,three-dimensional rectangular trapdoor(3DRT),is presented for ground surface collapse.Undrained stability of 3DRT is examined with the upper bound method of plasticity limit analy...A new collapse model of the trapdoors,three-dimensional rectangular trapdoor(3DRT),is presented for ground surface collapse.Undrained stability of 3DRT is examined with the upper bound method of plasticity limit analysis theory.The soil where the trapdoors are located is assumed to be a perfectly plastic model with a Tresca yield criterion.Block analysis technique is employed to investigate the collapse of 3DRT.The model is divided into five different block types and added up to ten rigid blocks.According to the law of conservation of energy,the critical stability ratios of 3DRT are obtained through a search proceeding.The results of upper bound solution for 3DRT are given,and three trapdoor models with depth various are discussed during the application in the stability analysis of square trapdoors.The critical stability ratios can be used in the design of underground excavation and support force.展开更多
In the course of Chinese civilization,which lasted more than 5,000 years,casting production has made a huge contribution.In this paper,some representative metal castings were presented.According to their forming techn...In the course of Chinese civilization,which lasted more than 5,000 years,casting production has made a huge contribution.In this paper,some representative metal castings were presented.According to their forming techniques,they can be grouped into stone mould casting,clay mould casting,ablation casting,lost wax casting,stack casting,permanent mould casting,sand casting,etc.According to their materials,they can be categorized into tin bronze,bimetallic bronze,malleable cast iron,ductile cast iron,brass,cupronickel alloy (Packtong),etc.According to their surface decorative techniques they can be devided into gem inlay,gilding,gold and silver inlay,copper inlay,engraved decoration,surface tin-enrichment,mother-of-pearl inlay,burnished works with gold or silver inlay,surface coloring and cloisonné enamel,etc.展开更多
Fluoro-ruby was injected into the posterior funiculus of the spinal cord in the cervical （C5-T2） and lumbar （L3-6） segments of adult guinea pigs. The spinal cord was cut into serial frozen sections. The Fluoro-rub...Fluoro-ruby was injected into the posterior funiculus of the spinal cord in the cervical （C5-T2） and lumbar （L3-6） segments of adult guinea pigs. The spinal cord was cut into serial frozen sections. The Fluoro-ruby labeling was clearly delineated from the surrounding structure. The labeling traversed the cervical, thoracic and lumbar segments, and was located on the ventral portion of the posterior funiculus on the injected side, proximal to the intermediate zone of the dorsal gray matter. The fluorescence area narrowed rostro-caudally. The spinal cord, spinal cord gray matter and corticospinal tract were reconstructed using 3D-DOCTOR 4.0 software, resulting in a robust three-dimensional profile. Using functionality provided by the reconstruction software, free multi-angle observation and sectioning could be conducted on the spinal cord and corticospinal tract. Our experimental findings indicate that the Fluoro-ruby retrograde fluorescent tracing technique can accurately display the anatomical location of corticospinal tract in the guinea pig and that three-dimensional reconstruction software can be used to provide a three-dimensional image of the corticospinal tract.展开更多
The word ＂tile＂ originates from Persian and means ＂China＂ or ＂Chinese work＂. In the Ottoman language, the word ＂tile＂ also means ＂Chinese work＂, or ＂belonging to China＂. The art of Turkish tiles occupies a...The word ＂tile＂ originates from Persian and means ＂China＂ or ＂Chinese work＂. In the Ottoman language, the word ＂tile＂ also means ＂Chinese work＂, or ＂belonging to China＂. The art of Turkish tiles occupies a place of prominence in the history of Islamic art. Its roots can be traced at least as far back as the Uygurs of the eighth and ninth centuries. Its subsequent development was influenced by the Karakhanids, the Ghaznavids, and （especially） Iranian Seljuk art. With the Seljuks＇ victory over the Byzantines at Malazgirt in 1071, the art followed them into Anatolia and embarked upon a new period of strong development fostered by the Anatolian Seljuk sultanate. The first major development in the art of tile-making occurred primarily in Anatolian Seljuk architecture. Various techniques have been used in the art of tiles which gave hundreds of samples for centuries. This study explores the glazed tile techniques used in the production of the S elj uk and Beylik periods.展开更多
Objectives This study was to investigate the differences between modeling and non-modeling left atrium （LA） in CartoXP system guided catheter ablation for paroxysmal atrial fibrillation （PAF）. Methods From Jan to ...Objectives This study was to investigate the differences between modeling and non-modeling left atrium （LA） in CartoXP system guided catheter ablation for paroxysmal atrial fibrillation （PAF）. Methods From Jan to Dec in 2008 total 31 cases with PAF were enrolled. All were treated by the same electrophysiologist with CartoXP guidance. Catheter ablation was accomplished without left atrium and pulmonary veins modeling in 17 patients （non-modeling group） and with left atrium modeling in 14 patients （modeling group）. The detailed ablation method was based on circumferential pulmonary veins isolation （CPVI）. And linear ablation of tricuspid valvular isthmus was performed individually. The ablation endpoint was a complete isolation of pulmonary vein potential from left atrium and no further induced continuous fast atrial arrhythmia including atrial fibrillation （AF）, atrial flutter （AFL） and atrial tachycardia （AT）. Each step for the procedures and the follow-up outcomes were compared correspondingly. Results The total procedure time was 107.23 ± 28.92 min in modeling group vs 93.47 ±26.09 min in non-modeling group （ P 〉 0.05 ）. The X-ray exposure time was significantly longer in modeling group （21.09 ±6. 49 rain） than in non-modeling group （14. 16 ± 5.35 min）. The CPVI times of right pulmonary veins and left pulmonary veins were 28. 14 ± 9. 26 min was 27.29 ± 18.53 min in modeling group respectively, vs 18.00 ±4. 51 min and 23.94 ± 7. 10 min in non-modeling group respectively, （P 〈 0. 05 ）. There is no significant difference between modeling group （85.7%） and non-modeling group （82.4%） over follow-up period of 2 to 13 months. Confusions CartoXP system guided catheter ablation of PAF without modeling of left atrium and pulmonary veins took less time in X-ray exposure and ablation steps, comparing with left atrium modeling procedure.展开更多
With the continuous development of the oblique photography technique, it has been used more and more widely in the field of geological disasters. It can quickly obtain the three-dimensional(3D) real scene model of dan...With the continuous development of the oblique photography technique, it has been used more and more widely in the field of geological disasters. It can quickly obtain the three-dimensional(3D) real scene model of dangerous mountainous areas under the premise of ensuring the safety of personnel while restoring the real geographic information as much as possible. However, geological disaster areas are often accompanied by many adverse factors such as cliffs and dense vegetation. Based on this, the paper introduced the flight line design of oblique photogrammetry, analyzed the multi-platform data fusion processing, studied the multi-period data dynamic evaluation technology and proposed the application methods of data acquisition, early warning, disaster assessment and decision management suitable for geological disaster identification through the analysis of actual cases, which will help geologists to plan and control geological work more scientifically and rationally, improve work efficiency and reduce the potential personnel safety hazards in the process of geological survey, to offer technical support to the application of oblique photogrammetry in geological disaster identification and decision making and provide the scientific basis for personal and property safety protection and later-stage geological disaster management in disaster areas.展开更多
基金This work was supported by the Brain Korea 2lProject and the Grallt of Post-Doc Program, KyungpookNational University (1999).
文摘Some techniques such as die surface description, contact judgement algorithm and remeshing are proposed to improve the robustness of the numerical solution. Based on these techniques, a three-dimensional rigid-plastic FEM code has been developed. Isothermal forging process of a cylindrical housing has been simulated. The simulation results show that the given techniques and the FEM code are reasonable and feasible for three-dimensional bulk forming processes.
基金supported by the China Geological Survey (No.1212011014030)the Major State Basic Research Development Program of China (973 Program) (No.2011CB710600)
文摘The estimation of shear strength of rock mass discontinuity is always a focal, but difficult, problem in the field of geotechnical engineering. Considering the disadvantages and limitation of exist- ing estimation methods, a new approach based on the shadow area percentage （SAP） that can be used to quantify surface roughness is proposed in this article. Firstly, by the help of laser scanning technique, the three-dimensional model of the surface of rock discontinuity was established. Secondly, a light source was simulated, and there would be some shadows produced on the model surface. Thirdly, to obtain the value of SAP of each specimen, the shadow detection technique was introduced for use. Fourthly, compared with the result from direct shear testing and based on statistics, an empirical for- mula was found among SAP, normal stress, and shear strength. Data of Yujian （~ River were used as an example, and the following conclusions have been made. （1） In the case of equal normal stress, the peak shear stress is positively proportional to the SAP. （2） The formula for estimating was derived, and the predictions of peak-shear strength made with this equation well agreed with the experimental re- suits obtained in laboratory tests.
文摘This study is aimed to explore the clinical application of the guiding template designed by three-dimensional printing data for the insertion of sacroiliac screws.A retrospective study of 7 cases (from July 2016 to December 2016),in which the guiding template printed by the three-dimensional printing technique was used for the insertion of sacroiliac screws of patients with posterior ring injuries of pelvis,was performed.Totally,4 males and 3 females were included in template group,aged from 38to 65years old (mean 50.86±8.90).Of them,5 had sacral fractures (3 with Denis type Ⅰ and 2 with type Ⅱ)and 2 the separation of sacroiliac joint.Guiding templates were firstly made by the three-dimensional printing technique based on the pre-operative CT data. Surgical operations for the stabilization of pelvic ring by applying the guiding templates were carried out.A group of 8 patients with sacroiliac injuries treated by percutaneous sacroiliac screws were analyzed as a control group retrospectively.The time of each screw insertion,volume of intra-operative blood loss,and the exposure to X ray were analyzed and the Matta's radiological criteria were used to evaluate the reduction quality.The Majeed score was used to evaluate postoperative living quality.The visual analogue scale (VAS)was applied at different time points to judge pain relief of coccydynia.All the 7 patients in the template group were closely followed up radiographically and clinically for 14 to 20 months,mean (16.57±2.44)months.Totally 9 sacroiliac screws for the S 1 and S2 vertebra were inserted in the 7 patients.The time length for each screw insertion ranged from 450 to 870 s,mean (690.56±135.68)s,and the number of times of exposure to X ray were 4 to 8,mean (5.78±1.20).The intra-operative blood loss ranged from 45to 120 mL,mean (75±23.32)mL.According to Matta's radiology criteria,the fracture and dislocation reduction were excellent in 6cases and good in 1.The pre-operative VAS score ranged from 5.2 to 8.1,mean (7.13±1.00).The average one-week/six-month post-operative VAS was (5.33±0.78)and (1.33±0.66),respectively (P<0.05 when compared with pre-operative VAS).The 12-month post-operative Majeed score ranged from 86 to 92,mean (90.29±2.21).The three-dimensional printed guiding template for sacroiliac screw insertion,which could significantly shorten the operation time,provide a satisfied outcome of the stabilization of the pelvic ring,and protect doctors and patients from X-ray exposure,might be a practical and valuable new clinical technique.
文摘This study was carried out in the University of Campinas to study the three-dimensional reconstruction of grape bunches through the application of the Moire technique as an alternative and innovative method, using low-cost equipment for data acquisition. This study proposed the three-dimensional visualization of grapes and topography on Xi axes through the Moire projection technique. The artificial grapes with a 20 cm long bunch and 18.45 mm average diameter for each grape were used. A projector was used to generate a grid with light and dark lines. The grape bunch was placed on a holder, illuminated by a sinusoidal grid and photographed. After processing the images, a three-dimensional map of the fruit and topography on Xi axes were obtained. The three-dimensional fruit observation allows the visualization of the higher and lower regions of the three-dimensional configuration through a color map. This result makes it possible to obtain size and shape of the grape bunch, allowing for the process automation of product selection and classification.
文摘Objective:This study investigated the effect of proximal contact strength on the three-dimensional displacements of cantilever fixed partial denture(CFPD) under vertically concentrated loading with digital laser speckle(DLS) technique.Methods:Fresh mandible of beagle dog was used to establish the implant-supported CFPD for specimen.DLS technique was employed for measuring the three-dimensional displacement of the prosthesis under vertically concentrated loading ranging from 200 to 3 000 g.The effect of the contact tightness on the displacement of CFPD was investigated by means of changing the contact tightness.Results:When an axial concentrated loading was exerted on the pontic of the implant-supported CFPD,the displacement of the CFPD was the greatest.The displacement of the prosthesis decreased with the increase of contact strength.When the contact strength was 0,0.95,and 3.25 N,the displacement of the buccolingual direction was smaller than that of the mesiodistal direction but greater than that of the occlusogingival direction.When the force on the contact area was 6.50 N,the mesiodistal displacement of the prosthesis was the biggest while the buccolingual displacement was the smallest.Conclusions:The implant supported CFPD is an effective therapy for fully or partially edentulous patients.The restoration of the contact area and the selection of the appropriate contact strength can reduce the displacement of the CFPD,and get a better stress distribution.The most appropriate force value is 3.25 N in this study.
基金This study was supported by the National key R&D plan(No.2020YFC2008100)the Science and Technology Innovation Team Project of the Shaanxi Innovation Capability Support Plan(No.S2020-ZC-TD-0029)the Science Foundation for Distinguished Young Scholars of Shaanxi Natural Science Basic Research Program(No.S2018-JC-JQ-0094)。
文摘Heart diseases remain the top threat to human health,and the treatment of heart diseases changes with each passing day.Convincing evidence shows that three-dimensional(3D)printing allows for a more precise understanding of the complex anatomy associated with various heart diseases.In addition,3D-printed models of cardiac diseases may serve as effective educational tools and for hands-on simulation of surgical interventions.We introduce examples of the clinical applications of different types of 3D printing based on specific cases and clinical application scenarios of 3D printing in treating heart diseases.We also discuss the limitations and clinically unmet needs of 3D printing in this context.
基金This project was financially supported by the National Committee of Science and Technology Grants/903-85-08-05
文摘A three-dimensional, first order turbulence closure, thermal diffusion model is described in this paper. The governing equations consist of an equation of continuity, three components of momentum, conservation equations for salt, temperature and subgridscale energy, and an equation of state. In the model, according to the hypothesis of Kolmogorov and Prandtl, the viscosity coefficient of turbulent flow of homogeneous fluid is related to the local turbulent energy, and the horizontal and vertical exchange coefficients of mass, heat and momentum are computed with the introduction of subgridscale turbulence energy. The governing equations are solved by finite difference techniques. This model is applied to the Jiaozhou bay to predict thermal pollution by the Huangdao power plant. An instantaneous tidal current field is computed, then the distribution of temperature increment is predicted, and finally the effect of wind stress on thermal discharge is discussed.
基金supported by grants from the National Key Research and Development Plan of China,No.31670986(to QTZ)the Science and Technology Project of Guangdong Province of China,No.2014B020227001,2017A050501017(to QTZ)the Science and Technology Project of Guangzhou of China,No.201807010082(to QTZ),201704030041(to JQ)
文摘The most common methods for three-dimensional reconstruction of peripheral nerve fascicles include histological and radiology techniques. Histological techniques have many drawbacks including an enormous manual workload and poor image registration. Micro-magnetic resonance imaging（Micro-MRI）, an emerging radiology technique, has been used to report results in the brain, liver and tumor tissues. However, micro-MRI usage for obtaining intraneural structures has not been reported. The aim of this study was to present a new imaging method for three-dimensional reconstruction of peripheral nerve fascicles by ~1T micro-MRI. Freshly harvested sciatic nerve samples from an amputated limb were divided into four groups. Two different scanning conditions（Mannerist Solution/GD-DTPA contrast agent, distilled water） were selected, and both T1 and T2 phases programmed for each scanning condition. Three clinical surgeons evaluated the quality of the images via a standardized scale. Moreover, to analyze deformation of the two-dimensional image, the nerve diameter and total area of the micro-MRI images were compared after hematoxylin-eosin staining. The results show that rapid micro-MRI imaging method can be used for three-dimensional reconstruction of the fascicle structure. Nerve sample immersed in contrast agent（Mannerist Solution/GD-DTPA） and scanned in the T1 phase was the best. Moreover, the nerve sample was scanned freshly and can be recycled for other procedures. MRI images show better stability and smaller deformation compared with histological images. In conclusion, micro-MRI provides a feasible and rapid method for three-dimensional reconstruction of peripheral nerve fascicles, which can clearly show the internal structure of the peripheral nerve.
基金the Fundamental Research Funds for the Provincial Universities,China(No.702/000007020303)。
文摘A new collapse model of the trapdoors,three-dimensional rectangular trapdoor(3DRT),is presented for ground surface collapse.Undrained stability of 3DRT is examined with the upper bound method of plasticity limit analysis theory.The soil where the trapdoors are located is assumed to be a perfectly plastic model with a Tresca yield criterion.Block analysis technique is employed to investigate the collapse of 3DRT.The model is divided into five different block types and added up to ten rigid blocks.According to the law of conservation of energy,the critical stability ratios of 3DRT are obtained through a search proceeding.The results of upper bound solution for 3DRT are given,and three trapdoor models with depth various are discussed during the application in the stability analysis of square trapdoors.The critical stability ratios can be used in the design of underground excavation and support force.
文摘In the course of Chinese civilization,which lasted more than 5,000 years,casting production has made a huge contribution.In this paper,some representative metal castings were presented.According to their forming techniques,they can be grouped into stone mould casting,clay mould casting,ablation casting,lost wax casting,stack casting,permanent mould casting,sand casting,etc.According to their materials,they can be categorized into tin bronze,bimetallic bronze,malleable cast iron,ductile cast iron,brass,cupronickel alloy (Packtong),etc.According to their surface decorative techniques they can be devided into gem inlay,gilding,gold and silver inlay,copper inlay,engraved decoration,surface tin-enrichment,mother-of-pearl inlay,burnished works with gold or silver inlay,surface coloring and cloisonné enamel,etc.
基金supported by a grant from the Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘Fluoro-ruby was injected into the posterior funiculus of the spinal cord in the cervical （C5-T2） and lumbar （L3-6） segments of adult guinea pigs. The spinal cord was cut into serial frozen sections. The Fluoro-ruby labeling was clearly delineated from the surrounding structure. The labeling traversed the cervical, thoracic and lumbar segments, and was located on the ventral portion of the posterior funiculus on the injected side, proximal to the intermediate zone of the dorsal gray matter. The fluorescence area narrowed rostro-caudally. The spinal cord, spinal cord gray matter and corticospinal tract were reconstructed using 3D-DOCTOR 4.0 software, resulting in a robust three-dimensional profile. Using functionality provided by the reconstruction software, free multi-angle observation and sectioning could be conducted on the spinal cord and corticospinal tract. Our experimental findings indicate that the Fluoro-ruby retrograde fluorescent tracing technique can accurately display the anatomical location of corticospinal tract in the guinea pig and that three-dimensional reconstruction software can be used to provide a three-dimensional image of the corticospinal tract.
文摘The word ＂tile＂ originates from Persian and means ＂China＂ or ＂Chinese work＂. In the Ottoman language, the word ＂tile＂ also means ＂Chinese work＂, or ＂belonging to China＂. The art of Turkish tiles occupies a place of prominence in the history of Islamic art. Its roots can be traced at least as far back as the Uygurs of the eighth and ninth centuries. Its subsequent development was influenced by the Karakhanids, the Ghaznavids, and （especially） Iranian Seljuk art. With the Seljuks＇ victory over the Byzantines at Malazgirt in 1071, the art followed them into Anatolia and embarked upon a new period of strong development fostered by the Anatolian Seljuk sultanate. The first major development in the art of tile-making occurred primarily in Anatolian Seljuk architecture. Various techniques have been used in the art of tiles which gave hundreds of samples for centuries. This study explores the glazed tile techniques used in the production of the S elj uk and Beylik periods.
文摘Objectives This study was to investigate the differences between modeling and non-modeling left atrium （LA） in CartoXP system guided catheter ablation for paroxysmal atrial fibrillation （PAF）. Methods From Jan to Dec in 2008 total 31 cases with PAF were enrolled. All were treated by the same electrophysiologist with CartoXP guidance. Catheter ablation was accomplished without left atrium and pulmonary veins modeling in 17 patients （non-modeling group） and with left atrium modeling in 14 patients （modeling group）. The detailed ablation method was based on circumferential pulmonary veins isolation （CPVI）. And linear ablation of tricuspid valvular isthmus was performed individually. The ablation endpoint was a complete isolation of pulmonary vein potential from left atrium and no further induced continuous fast atrial arrhythmia including atrial fibrillation （AF）, atrial flutter （AFL） and atrial tachycardia （AT）. Each step for the procedures and the follow-up outcomes were compared correspondingly. Results The total procedure time was 107.23 ± 28.92 min in modeling group vs 93.47 ±26.09 min in non-modeling group （ P 〉 0.05 ）. The X-ray exposure time was significantly longer in modeling group （21.09 ±6. 49 rain） than in non-modeling group （14. 16 ± 5.35 min）. The CPVI times of right pulmonary veins and left pulmonary veins were 28. 14 ± 9. 26 min was 27.29 ± 18.53 min in modeling group respectively, vs 18.00 ±4. 51 min and 23.94 ± 7. 10 min in non-modeling group respectively, （P 〈 0. 05 ）. There is no significant difference between modeling group （85.7%） and non-modeling group （82.4%） over follow-up period of 2 to 13 months. Confusions CartoXP system guided catheter ablation of PAF without modeling of left atrium and pulmonary veins took less time in X-ray exposure and ablation steps, comparing with left atrium modeling procedure.
基金supported by the National Key R&D Program of China(2019YFC1510700)the Sichuan Science and Technology Program(2023YFS0380, 2023YFS0377, 2019YFG0460, 2022YFS0539)。
文摘With the continuous development of the oblique photography technique, it has been used more and more widely in the field of geological disasters. It can quickly obtain the three-dimensional(3D) real scene model of dangerous mountainous areas under the premise of ensuring the safety of personnel while restoring the real geographic information as much as possible. However, geological disaster areas are often accompanied by many adverse factors such as cliffs and dense vegetation. Based on this, the paper introduced the flight line design of oblique photogrammetry, analyzed the multi-platform data fusion processing, studied the multi-period data dynamic evaluation technology and proposed the application methods of data acquisition, early warning, disaster assessment and decision management suitable for geological disaster identification through the analysis of actual cases, which will help geologists to plan and control geological work more scientifically and rationally, improve work efficiency and reduce the potential personnel safety hazards in the process of geological survey, to offer technical support to the application of oblique photogrammetry in geological disaster identification and decision making and provide the scientific basis for personal and property safety protection and later-stage geological disaster management in disaster areas.
