In this article,a three-dimensional cooperative guidance problem for highly maneuvering targets is investigated under the assumption of perfect information.Inspired by the coverage strategy,the cooperative guidance pr...In this article,a three-dimensional cooperative guidance problem for highly maneuvering targets is investigated under the assumption of perfect information.Inspired by the coverage strategy,the cooperative guidance problem is decomposed into one-on-one guidance problems against predictive interception points.To expand the coverage area of each missile,these one-on-one guidance problems are formulated as flight path angle tracking problems,and the optimal error dynamics is extended to derive the guidance law analytically.In addition,through the introduction of the coverage probability model,the dynamic coverage strategy is proposed.The predictive interception points are updated online by maximizing the coverage probability,which aims to achieve successful interception despite variations in target acceleration.Furthermore,a switching strategy of the guidance command is designed for collision avoidance.Simulation results demonstrate that the missile group can cooperatively intercept a highly maneuvering target under the proposed guidance law.展开更多
Unmanned aerial vehicles(UAVs)are widely utilized in area coverage tasks due to their flexibility and efficiency in geo-graphic information acquisition.However,complex boundary conditions in actual water area maps oft...Unmanned aerial vehicles(UAVs)are widely utilized in area coverage tasks due to their flexibility and efficiency in geo-graphic information acquisition.However,complex boundary conditions in actual water area maps often reduce coverage efficiency.To address this issue,this paper proposes a map preprocessing algorithm that linearizes boundary lines and processes concave areas into concave polygons,followed by gridding the map.Additionally,a collaborative area coverage method for UAV swarms is introduced based on region partitioning,which considers the comprehensive cost of energy consumption and time.An improved Hungarian algorithm is utilized for region partitioning,and a Dubins-A*-based plow-ing area full coverage path planning method is proposed to achieve path smoothing and collaborative coverage of each partition.Two sets of simulation experiments are conducted.The first experiment verifies the effectiveness of the map preprocessing algorithm,and the second compares the proposed collaborative area coverage algorithm with other methods,demonstrating its performance advantages.展开更多
According to the Mindlin plate theory and the first-order piston theory,this work obtains accurate closed-form eigensolutions for the flutter problem of three-dimensional(3D)rectangular laminated panels.The governing ...According to the Mindlin plate theory and the first-order piston theory,this work obtains accurate closed-form eigensolutions for the flutter problem of three-dimensional(3D)rectangular laminated panels.The governing differential equations are derived by the Hamilton's variational principle,and then solved by the iterative Separation-of-Variable(i SOV)method,which are applicable to arbitrary combinations of homogeneous Boundary Conditions(BCs).However,only the simply-support,clamped and cantilever panels are considered in this work for the sake of clarity.With the closed-form eigensolutions,the flutter frequency,flutter mode and flutter boundary are presented,and the effect of shear deformation and aerodynamic damping on flutter frequencies is investigated.Besides,the relation between panel energy and the work of aerodynamic load is discussed.The numerical comparisons reveal the following.(A)The flutter eigenvalues obtained by the present method are accurate,validated by the Finite Element Method(FEM)and the Galerkin method.(B)When the span-chord ratio is larger than 3,simplifying a 3D panel to 2D(two-dimensional)panel is reasonable and the relative differences of the flutter points predicted by the two models are less than one percent.(C)The reciprocal relationship between the mechanical energy of the panel and the work done by aerodynamic load is verified by using the present flutter eigenvalues and modes,further indicating the high accuracy of the present solutions.(D)The coupling of shear deformation and aerodynamic damping prevents frequency coalescing.展开更多
To address the problem of multi-missile cooperative interception against maneuvering targets at a prespecified impact time and desired Line-of-Sight(LOS)angles in ThreeDimensional(3D)space,this paper proposes a 3D lea...To address the problem of multi-missile cooperative interception against maneuvering targets at a prespecified impact time and desired Line-of-Sight(LOS)angles in ThreeDimensional(3D)space,this paper proposes a 3D leader-following cooperative interception guidance law.First,in the LOS direction of the leader,an impact time-controlled guidance law is derived based on the fixed-time stability theory,which enables the leader to complete the interception task at a prespecified impact time.Next,in the LOS direction of the followers,by introducing a time consensus tracking error function,a fixed-time consensus tracking guidance law is investigated to guarantee the consensus tracking convergence of the time-to-go.Then,in the direction normal to the LOS,by combining the designed global integral sliding mode surface and the second-order Sliding Mode Control(SMC)theory,an innovative 3D LOS-angle-constrained interception guidance law is developed,which eliminates the reaching phase in the traditional sliding mode guidance laws and effectively saves energy consumption.Moreover,it effectively suppresses the chattering phenomenon while avoiding the singularity issue,and compensates for unknown interference caused by target maneuvering online,making it convenient for practical engineering applications.Finally,theoretical proof analysis and multiple sets of numerical simulation results verify the effectiveness,superiority,and robustness of the investigated guidance law.展开更多
Three-dimensional(3D)urban structures play a critical role in informing climate mitigation strategies aimed at the built environment and facilitating sustainable urban development.Regrettably,there exists a significan...Three-dimensional(3D)urban structures play a critical role in informing climate mitigation strategies aimed at the built environment and facilitating sustainable urban development.Regrettably,there exists a significant gap in detailed and consistent data on 3D building space structures with global coverage due to the challenges inherent in the data collection and model calibration processes.In this study,we constructed a global urban structure(GUS-3D)dataset,including building volume,height,and footprint information,at a 500 m spatial resolution using extensive satellite observation products and numerous reference building samples.Our analysis indicated that the total volume of buildings worldwide in2015 exceeded 1×10^(12)m^(3).Over the 1985 to 2015 period,we observed a slight increase in the magnitude of 3D building volume growth(i.e.,it increased from 166.02 km3 during the 1985–2000 period to 175.08km3 during the 2000–2015 period),while the expansion magnitudes of the two-dimensional(2D)building footprint(22.51×10^(3) vs 13.29×10^(3)km^(2))and urban extent(157×10^(3) vs 133.8×10^(3)km^(2))notably decreased.This trend highlights the significant increase in intensive vertical utilization of urban land.Furthermore,we identified significant heterogeneity in building space provision and inequality across cities worldwide.This inequality is particularly pronounced in many populous Asian cities,which has been overlooked in previous studies on economic inequality.The GUS-3D dataset shows great potential to deepen our understanding of the urban environment and creates new horizons for numerous 3D urban studies.展开更多
BACKGROUND Inguinal hernias are common after surgery.Tension-free repair is widely accepted as the main method for managing inguinal hernias.Adequate exposure,coverage,and repair of the myopectineal orifice(MPO)are ne...BACKGROUND Inguinal hernias are common after surgery.Tension-free repair is widely accepted as the main method for managing inguinal hernias.Adequate exposure,coverage,and repair of the myopectineal orifice(MPO)are necessary.However,due to differences in race and sex,people’s body shapes vary.According to European guidelines,the patch should measure 10 cm×15 cm.If any part of the MPO is dissected,injury to the nerves,vascular network,or organs may occur during surgery,thereby leading to inguinal discomfort,pain,and seroma formation after surgery.Therefore,accurate localization and measurement of the boundary of the MPO are crucial for selecting the optimal patch for inguinal hernia repair.AIM To compare the size of the MPO measured on three-dimensional multislice spiral computed tomography(CT)with that measured via laparoscopy and explore the relevant factors influencing the size of the MPO.METHODS Clinical data from 74 patients who underwent laparoscopic tension-free inguinal hernia repair at the General Surgery Department of the First Affiliated Hospital of Anhui University of Science and Technology between September 2022 and July 2024 were collected and analyzed retrospectively.Transabdominal preperitoneal was performed.Sixty-four males and 10 females,with an average age of 58.30±12.32 years,were included.The clinical data of the patients were collected.The boundary of the MPO was measured on three-dimensional CT images before surgery and then again during transabdominal preperitoneal.All the preoperative and intraoperative data were analyzed via paired t-tests.A t-test was used for comparisons of age,body mass index,and sex between the groups.In the comparative analysis,a P value less than 0.05 indicated a significant difference.RESULTS The boundaries of the MPO on 3-dimensional CT images measured 7.05±0.47 cm and 6.27±0.61 cm,and the area of the MPO was 19.54±3.33 cm^(2).The boundaries of the MPO during surgery were 7.18±0.51 cm and 6.17±0.40 cm.The errors were not statistically significant.However,the intraoperative BD(the width of the MPO,P=0.024,P<0.05)and preoperative AC(the length of the MPO,P=0.045,P<0.05)significantly differed according to sex.The AC and BD measurements before and during surgery were not significantly different according to age,body mass index,hernia side or hernia type(P>0.05).CONCLUSION The application of this technology can aid in determining the most appropriate dissection range and patch size.展开更多
In the current era of intelligent technologies,comprehensive and precise regional coverage path planning is critical for tasks such as environmental monitoring,emergency rescue,and agricultural plant protection.Owing ...In the current era of intelligent technologies,comprehensive and precise regional coverage path planning is critical for tasks such as environmental monitoring,emergency rescue,and agricultural plant protection.Owing to their exceptional flexibility and rapid deployment capabilities,unmanned aerial vehicles(UAVs)have emerged as the ideal platforms for accomplishing these tasks.This study proposes a swarm A^(*)-guided Deep Q-Network(SADQN)algorithm to address the coverage path planning(CPP)problem for UAV swarms in complex environments.Firstly,to overcome the dependency of traditional modeling methods on regular terrain environments,this study proposes an improved cellular decomposition method for map discretization.Simultaneously,a distributed UAV swarm system architecture is adopted,which,through the integration of multi-scale maps,addresses the issues of redundant operations and flight conflicts inmulti-UAV cooperative coverage.Secondly,the heuristic mechanism of the A^(*)algorithmis combinedwith full-coverage path planning,and this approach is incorporated at the initial stage ofDeep Q-Network(DQN)algorithm training to provide effective guidance in action selection,thereby accelerating convergence.Additionally,a prioritized experience replay mechanism is introduced to further enhance the coverage performance of the algorithm.To evaluate the efficacy of the proposed algorithm,simulation experiments were conducted in several irregular environments and compared with several popular algorithms.Simulation results show that the SADQNalgorithmoutperforms othermethods,achieving performance comparable to that of the baseline prior algorithm,with an average coverage efficiency exceeding 2.6 and fewer turning maneuvers.In addition,the algorithm demonstrates excellent generalization ability,enabling it to adapt to different environments.展开更多
It is of great importance to obtain precise trace data,as traces are frequently the sole visible and measurable parameter in most outcrops.The manual recognition and detection of traces on high-resolution three-dimens...It is of great importance to obtain precise trace data,as traces are frequently the sole visible and measurable parameter in most outcrops.The manual recognition and detection of traces on high-resolution three-dimensional(3D)models are relatively straightforward but time-consuming.One potential solution to enhance this process is to use machine learning algorithms to detect the 3D traces.In this study,a unique pixel-wise texture mapper algorithm generates a dense point cloud representation of an outcrop with the precise resolution of the original textured 3D model.A virtual digital image rendering was then employed to capture virtual images of selected regions.This technique helps to overcome limitations caused by the surface morphology of the rock mass,such as restricted access,lighting conditions,and shading effects.After AI-powered trace detection on two-dimensional(2D)images,a 3D data structuring technique was applied to the selected trace pixels.In the 3D data structuring,the trace data were structured through 2D thinning,3D reprojection,clustering,segmentation,and segment linking.Finally,the linked segments were exported as 3D polylines,with each polyline in the output corresponding to a trace.The efficacy of the proposed method was assessed using a 3D model of a real-world case study,which was used to compare the results of artificial intelligence(AI)-aided and human intelligence trace detection.Rosette diagrams,which visualize the distribution of trace orientations,confirmed the high similarity between the automatically and manually generated trace maps.In conclusion,the proposed semi-automatic method was easy to use,fast,and accurate in detecting the dominant jointing system of the rock mass.展开更多
Currently,there are a limited number of dynamic models available for braided composite plates with large overall motions,despite the incorporation of three-dimensional(3D)braided composites into rotating blade compone...Currently,there are a limited number of dynamic models available for braided composite plates with large overall motions,despite the incorporation of three-dimensional(3D)braided composites into rotating blade components.In this paper,a dynamic model of 3D 4-directional braided composite thin plates considering braiding directions is established.Based on Kirchhoff's plate assumptions,the displacement variables of the plate are expressed.By incorporating the braiding directions into the constitutive equation of the braided composites,the dynamic model of the plate considering braiding directions is obtained.The effects of the speeds,braiding directions,and braided angles on the responses of the plate with fixed-axis rotation and translational motion,respectively,are investigated.This paper presents a dynamic theory for calculating the deformation of 3D braided composite structures undergoing both translational and rotational motions.It also provides a simulation method for investigating the dynamic behavior of non-isotropic material plates in various applications.展开更多
Liposarcoma is one of the most common soft tissue sarcomas,however,its occurrence rate is still rare compared to other cancers.Due to its rarity,in vitro experiments are an essential approach to elucidate liposarcoma ...Liposarcoma is one of the most common soft tissue sarcomas,however,its occurrence rate is still rare compared to other cancers.Due to its rarity,in vitro experiments are an essential approach to elucidate liposarcoma pathobiology.Conventional cell culture-based research(2D cell culture)is still playing a pivotal role,while several shortcomings have been recently under discussion.In vivo,mouse models are usually adopted for pre-clinical analyses with expectations to overcome the issues of 2D cell culture.However,they do not fully recapitulate human dedifferentiated liposarcoma(DDLPS)characteristics.Therefore,three-dimensional(3D)culture systems have been the recent research focus in the cell biology field with the expectation to overcome at the same time the disadvantages of 2D cell culture and in vivo animal models and fill in the gap between them.Given the liposarcoma rarity,we believe that 3D cell culture techniques,including 3D cell cultures/co-cultures,and Patient-Derived tumor Organoids(PDOs),represent a promising approach to facilitate liposarcoma investigation and elucidate its molecular mechanisms and effective therapy development.In this review,we first provide a general overview of 3D cell cultures compared to 2D cell cultures.We then focus on one of the recent 3D cell culture applications,Patient-Derived Organoids(PDOs),summarizing and discussing several PDO methodologies.Finally,we discuss the current and future applications of PDOs to sarcoma,particularly in the field of liposarcoma.展开更多
Bone repair remains an important target in tissue engineering,making the development of bioactive scaffolds for effective bone defect repair a critical objective.In this study,β-tricalcium phosphate(β-TCP)scaffolds ...Bone repair remains an important target in tissue engineering,making the development of bioactive scaffolds for effective bone defect repair a critical objective.In this study,β-tricalcium phosphate(β-TCP)scaffolds incorporated with processed pyritum decoction(PPD)were fabricated using three-dimensional(3D)printing-assisted freeze-casting.The produced composite scaffolds were evaluated for their mechanical strength,physicochemical properties,biocompatibility,in vitro proangiogenic activity,and in vivo efficacy in repairing rabbit femoral defects.They not only demonstrated excellent physicochemical properties,enhanced mechanical strength,and good biosafety but also significantly promoted the proliferation,migration,and aggregation of pro-angiogenic human umbilical vein endothelial cells(HUVECs).In vivo studies revealed that all scaffold groups facilitated osteogenesis at the bone defect site,with theβ-TCP scaffolds loaded with PPD markedly enhancing the expression of neurogenic locus Notch homolog protein 1(Notch1),vascular endothelial growth factor(VEGF),bone morphogenetic protein-2(BMP-2),and osteopontin(OPN).Overall,the scaffolds developed in this study exhibited strong angiogenic and osteogenic capabilities both in vitro and in vivo.The incorporation of PPD notably promoted the angiogenic-osteogenic coupling,thereby accelerating bone repair,which suggests that PPD is a promising material for bone repair and that the PPD/β-TCP scaffolds hold great potential as a bone graft alternative.展开更多
This study utilized a computer application developed in Visual StudioTM using C# to extract pixel samples (RGB) from multiple images (26 images obtained from August 20, 2024, to September 22, 2024), of a purslane pot ...This study utilized a computer application developed in Visual StudioTM using C# to extract pixel samples (RGB) from multiple images (26 images obtained from August 20, 2024, to September 22, 2024), of a purslane pot taken from a top-down perspective at a distance of 30 cm. These samples were projected into the CIELAB color space, and the extracted pixels were plotted on the a*b* plane, excluding the luminance value. A polygon was then drawn around all the plotted pixels, defining the color to be identified. Subsequently, the application analyzed another image to determine the number of pixels within the polygon. These identified pixels were transformed to white, and the percentage of these pixels relative to the total number of pixels in the image was calculated. This process yielded percentages for brown (soil), green (leaf cover), and pink (stem color). A single polygon was sufficient to accurately identify the green and brown colors in the images. However, due to varying lighting conditions, customized polygons were necessary for each image to accurately identify the stem color. To validate the green polygon’s accuracy in identifying purslane leaves, all leaves in the image were digitized in AutoCADTM, and the green area was compared to the total image area to obtain the observed green percentage. The green percentage obtained with the polygon was then compared to the observed green percentage, resulting in an R2 value of 0.8431. Similarly, for the brown color, an R2 value of 0.9305 was found. The stem color was not subjected to this validation due to the necessity of multiple polygons. The R2 values were derived from percentage data obtained by analyzing the total pixels in the images. When sampling to estimate the proportion and analyzing only the suggested sample size of pixels, R2 values of 0.93049 for brown and 0.8088 for green were obtained. The average analysis time to determine the brown soil percentage using the polygon (BP) for 26 images with an average size of 1070 × 1210 pixels was 44 seconds. In contrast, sampling to estimate the proportion reduced the analysis time to 0.9 seconds for the same number of images. This indicates that significant time savings can be achieved while obtaining similar results.展开更多
The development of minimally invasive surgery has transformed the management of gastrointestinal cancer.Notably,three-dimensional visualization systems have increased surgical precision.This editorial discusses a rece...The development of minimally invasive surgery has transformed the management of gastrointestinal cancer.Notably,three-dimensional visualization systems have increased surgical precision.This editorial discusses a recent study by Shen and Zhang,which compared the clinical applications of naked-eye threedimensional laparoscopic systems vs traditional optical systems in radical surgery for gastric and colorectal cancer.Both systems appeared to yield comparable surgical and oncological outcomes in terms of safety parameters,operating times,and quality of lymph node dissection.However,the spectacle-free system’s technical and logistical limitations hindered its effects on the surgical team’s overall competency.This editorial examines the authors’findings within the broader context of the evolution of oncologic laparoscopy,discusses the relevance of the results in light of the current literature,and proposes future research directions focused on multicenter validation,comprehensive ergonomic analysis,and technological advancements aimed at enhancing intraoperative collaboration.As technology continues to evolve,clinical implementation of new methods must be supported by robust scientific evidence and standardized criteria,to ensure tangible improvements in efficiency,safety,and oncologic outcomes.展开更多
The three-dimensional particle electrode system exhibits significant potential for application in the treatment of wastewater.Nonetheless,the advancement of effective granular electrodes characterized by elevated cata...The three-dimensional particle electrode system exhibits significant potential for application in the treatment of wastewater.Nonetheless,the advancement of effective granular electrodes characterized by elevated catalytic activity and minimal energy consumption continues to pose a significant challenge.In this research,Fluorine-doped copper-carbon(F/Cu-GAC)particle electrodes were effectively synthesized through an impregnationcalcination technique,utilizing granular activated carbon as the carrier and fluorinedoped modified copper oxides as the catalytic agents.The particle electrodes were subsequently utilized to promote the degradation of 2,4,6-trichlorophenol(2,4,6-TCP)in a threedimensional electrocatalytic reactor(3DER).The F/Cu-GAC particle electrodes were polarized under the action of electric field,which promoted the heterogeneous Fenton-like reaction in which H2O2 generated by two-electron oxygen reduction reaction(2e-ORR)of O_(2) was catalytically decomposed to·OH.The 3DER equipped with F/Cu-GAC particle electrodes showed 100%removal of 2,4,6-TCP and 79.24%removal of TOC with a specific energy consumption(EC)of approximately 0.019 kWh/g·COD after 2 h of operation.The F/Cu-GAC particle electrodes exhibited an overpotential of 0.38 V and an electrochemically active surface area(ECSA)of 715 cm^(2),as determined through linear sweep voltammetry(LSV)and cyclic voltammetry(CV)assessments.These findings suggest a high level of electrocatalytic performance.Furthermore,the catalytic mechanism of the 3DER equipped with F/Cu-GAC particle electrodes was elucidated through the application of X-ray photoelectron spectroscopy(XPS),electron spin resonance(ESR),and active species capture experiments.This investigation offers a novel approach for the effective degradation of 2,4,6-TCP.展开更多
Complex multi-area collaborative coverage path planning in dynamic environments poses a significant challenge for multi-fixed-wing UAVs(multi-UAV).This study establishes a comprehensive framework that incorporates UAV...Complex multi-area collaborative coverage path planning in dynamic environments poses a significant challenge for multi-fixed-wing UAVs(multi-UAV).This study establishes a comprehensive framework that incorporates UAV capabilities,terrain,complex areas,and mission dynamics.A novel dynamic collaborative path planning algorithm is introduced,designed to ensure complete coverage of designated areas.This algorithm meticulously optimizes the operation,entry,and transition paths for each UAV,while also establishing evaluation metrics to refine coverage sequences for each area.Additionally,a three-dimensional path is computed utilizing an altitude descent method,effectively integrating twodimensional coverage paths with altitude constraints.The efficacy of the proposed approach is validated through digital simulations and mixed-reality semi-physical experiments across a variety of dynamic scenarios,including both single-area and multi-area coverage by multi-UAV.Results show that the coverage paths generated by this method significantly reduce both computation time and path length,providing a reliable solution for dynamic multi-UAV mission planning in semi-physical environments.展开更多
Research has shown considerable variability in whitecap coverage(W)under low to moderate wind conditions.During an expedition to the Northwestern Pacific,oceanographic variables and photographic measurements were coll...Research has shown considerable variability in whitecap coverage(W)under low to moderate wind conditions.During an expedition to the Northwestern Pacific,oceanographic variables and photographic measurements were collected to investigate the influence of wave-induced stress on W within these wind ranges.The friction velocity was recalculated based on turbulent stress,and wind profiles were modified to account for wave-induced stress and swell presence on the sea surface.The study examined W’s relationship with multiple parameters,including friction velocity(u*),breaking wave Reynolds numbers,wavesea Reynolds numbers,and wave age.The analysis utilized both conventional u*and turbulent stress-based friction velocity(u*turb).When utilizing u*turb rather than u*,the estimation model’s fitting results revealed an increase in correlation coefficient(R2)from 0.51 to 0.62,and a decrease in root mean square error(RMSE)from 0.0652 to 0.0574.Additionally,when parameterizing W using the windsea Reynolds number,with u_(*turb) replacing u*and wind wave height substituting mixed wave height,the R^(2) increased from 0.38 to 0.53,and the RMSE decreased from 0.0737 to 0.0668.The results demonstrate that calculating u*using the turbulent stress-based method,along with wind wave height and peak wave speed of mixed waves,yields stronger correlation with W.This correlation improvement stems from the inhibition of wave breaking by swell and wave-induced stress.The integration of turbulent stress and wind wave field measurements enhances the understanding of relationships between W and various parameters.However,swell effects on wind profiles do not substantially affect W estimation using wind speed-related parameters.展开更多
In this study,CiteSpace software is used to carry out visual analysis on the three-dimensional research literature on urban recreation space from the perspective of compact city theory in the past 20 years,exploring t...In this study,CiteSpace software is used to carry out visual analysis on the three-dimensional research literature on urban recreation space from the perspective of compact city theory in the past 20 years,exploring the scientific development trend and research hotspots in this field.The results show that the number of published documents shows a fluctuating upward trend,and the significant growth rate reflects the role of policy orientation in promoting the concept of compact city.The co-occurrence analysis of keywords reveals the research hotspots of“compact city”,“recreation space”and“urban park”,while the emergence of new keywords such as“vertical city”and“spatial justice”indicates the new trend of recent research.The cluster analysis and timeline map further show the evolution of research themes,with“compact city”being the largest cluster and having rich connections with other themes such as“urban design”and“urban park”.展开更多
As the problem of surface garbage pollution becomes more serious,it is necessary to improve the efficiency of garbage inspection and picking rather than traditional manual methods.Due to lightness,Unmanned Aerial Vehi...As the problem of surface garbage pollution becomes more serious,it is necessary to improve the efficiency of garbage inspection and picking rather than traditional manual methods.Due to lightness,Unmanned Aerial Vehicles(UAVs)can traverse the entire water surface in a short time through their flight field of view.In addition,Unmanned Surface Vessels(USVs)can provide battery replacement and pick up garbage.In this paper,we innovatively establish a system framework for the collaboration between UAV and USVs,and develop an automatic water cleaning strategy.First,on the basis of the partition principle,we propose a collaborative coverage path algorithm based on UAV off-site takeoff and landing to achieve global inspection.Second,we design a task scheduling and assignment algorithm for USVs to balance the garbage loads based on the particle swarm optimization algorithm.Finally,based on the swarm intelligence algorithm,we also design an autonomous obstacle avoidance path planning algorithm for USVs to realize autonomous navigation and collaborative cleaning.The system can simultaneously perform inspection and clearance tasks under certain constraints.The simulation results show that the proposed algorithms have higher generality and flexibility while effectively improving computational efficiency and reducing actual cleaning costs compared with other schemes.展开更多
Background:Globally,the use of community pharmacies and pharmacists in the delivery of vaccination services has been hampered by several factors,laws,and regulations that do not support pharmacists to participate in t...Background:Globally,the use of community pharmacies and pharmacists in the delivery of vaccination services has been hampered by several factors,laws,and regulations that do not support pharmacists to participate in the delivery of vaccination services.With the advent of COVID-19 pandemic,many countries have included community pharmacists and pharmacies in vaccination services to improve coverage.This study described the delivery of vaccination services in community pharmacies using the COVID-19 experience and how their involvement impacted vaccination coverage in Nigeria.It also exposed how this experience can be used to support policy revisions to formally recognize pharmacists in immunization delivery.Methods:A descriptive cross-sectional study was conducted among 474 community pharmacists in two southwestern States in Nigeria,using a semi-structured questionnaire.It determines the number of community pharmacists who have been trained in the delivery of vaccination services,the types of vaccination services provided,and vaccines administered in their pharmacies.Data were analyzed with descriptive and inferential statistics and p-value at≤0.05.Results:Response rate was 86.7%.Less than half of the respondents(40.1%)had undergone vaccination training.Of the 129(31.4%)respondents that provide vaccination services,72(55.8%)administer vaccines in their pharmacies.Out of these 72 respondents;45(62.5%)were administering vaccines before their involvement in COVID-19 vaccine administration;57(79.2%)of the health personnel who administer vaccines were pharmacists;60(83.3%)of them administer vaccines on request;22(30.6%)administered COVID-19 vaccines only;and only 7(9.7%)of the respondents had administered over 500 doses of COVID-19 vaccines.Training in vaccination was associated with the vaccination services provided(p<0.05).Respondents suggested government support through legal framework and policy review,training and empowering pharmacists in vaccine administration,and recognition of community pharmacists as PHC providers.展开更多
In offshore maritime communication sys-tems,base stations(BSs)are employed along the coastline to provide high-speed data service for ves-sels in coastal sea areas.To ensure the line-of-sight propagation of BS-vessel ...In offshore maritime communication sys-tems,base stations(BSs)are employed along the coastline to provide high-speed data service for ves-sels in coastal sea areas.To ensure the line-of-sight propagation of BS-vessel links,high transceiver an-tenna height is required,which limits the number of geographically available sites for BS deployment,and imposes a high cost for realizing effective wide-area coverage.In this paper,the joint user association and power allocation(JUAPA)problem is investigated to enhance the coverage of offshore maritime systems.By exploiting the characteristics of network topology as well as vessels’motion in offshore communica-tions,a multi-period JUAPA problem is formulated to maximize the number of ships that can be simultane-ously served by the network.This JUAPA problem is intrinsically non-convex and subject to mixed-integer constraints,which is difficult to solve either analyt-ically or numerically.Hence,we propose an iterative augmentation based framework to efficiently select the active vessels,where the JUAPA scheme is iteratively optimized by the network for increasing the number of the selected vessels.More specifically,in each itera-tion,the user association variables and power alloca-tion variables are determined by solving two separate subproblems,so that the JUAPA strategy can be up-dated in a low-complexity manner.The performance of the proposed JUAPA method is evaluated by exten-sive simulation,and numerical results indicate that it can effectively increase the number of vessels served by the network,and thus enhances the coverage of off-shore systems.展开更多
基金supported by the National Natural Science Foundation of China(Nos.61773142,62303136)China Postdoctoral Science Foundation(No.2023M740912)Postdoctoral Fellowship Program of CPSF,China(No.GZC20233447).
文摘In this article,a three-dimensional cooperative guidance problem for highly maneuvering targets is investigated under the assumption of perfect information.Inspired by the coverage strategy,the cooperative guidance problem is decomposed into one-on-one guidance problems against predictive interception points.To expand the coverage area of each missile,these one-on-one guidance problems are formulated as flight path angle tracking problems,and the optimal error dynamics is extended to derive the guidance law analytically.In addition,through the introduction of the coverage probability model,the dynamic coverage strategy is proposed.The predictive interception points are updated online by maximizing the coverage probability,which aims to achieve successful interception despite variations in target acceleration.Furthermore,a switching strategy of the guidance command is designed for collision avoidance.Simulation results demonstrate that the missile group can cooperatively intercept a highly maneuvering target under the proposed guidance law.
基金National Natural Science Foundation of China(62402020,62303022)Beijing Nova Program(20240484720)+1 种基金Project of Cultivation for Young Top-Notch Talents of Beijing Municipal Institutions(BPHR202203043)BTBU Digital Business Platform Project byBMEC.
文摘Unmanned aerial vehicles(UAVs)are widely utilized in area coverage tasks due to their flexibility and efficiency in geo-graphic information acquisition.However,complex boundary conditions in actual water area maps often reduce coverage efficiency.To address this issue,this paper proposes a map preprocessing algorithm that linearizes boundary lines and processes concave areas into concave polygons,followed by gridding the map.Additionally,a collaborative area coverage method for UAV swarms is introduced based on region partitioning,which considers the comprehensive cost of energy consumption and time.An improved Hungarian algorithm is utilized for region partitioning,and a Dubins-A*-based plow-ing area full coverage path planning method is proposed to achieve path smoothing and collaborative coverage of each partition.Two sets of simulation experiments are conducted.The first experiment verifies the effectiveness of the map preprocessing algorithm,and the second compares the proposed collaborative area coverage algorithm with other methods,demonstrating its performance advantages.
基金support of the National Natural Science Foundation of China(No.12172023)。
文摘According to the Mindlin plate theory and the first-order piston theory,this work obtains accurate closed-form eigensolutions for the flutter problem of three-dimensional(3D)rectangular laminated panels.The governing differential equations are derived by the Hamilton's variational principle,and then solved by the iterative Separation-of-Variable(i SOV)method,which are applicable to arbitrary combinations of homogeneous Boundary Conditions(BCs).However,only the simply-support,clamped and cantilever panels are considered in this work for the sake of clarity.With the closed-form eigensolutions,the flutter frequency,flutter mode and flutter boundary are presented,and the effect of shear deformation and aerodynamic damping on flutter frequencies is investigated.Besides,the relation between panel energy and the work of aerodynamic load is discussed.The numerical comparisons reveal the following.(A)The flutter eigenvalues obtained by the present method are accurate,validated by the Finite Element Method(FEM)and the Galerkin method.(B)When the span-chord ratio is larger than 3,simplifying a 3D panel to 2D(two-dimensional)panel is reasonable and the relative differences of the flutter points predicted by the two models are less than one percent.(C)The reciprocal relationship between the mechanical energy of the panel and the work done by aerodynamic load is verified by using the present flutter eigenvalues and modes,further indicating the high accuracy of the present solutions.(D)The coupling of shear deformation and aerodynamic damping prevents frequency coalescing.
文摘To address the problem of multi-missile cooperative interception against maneuvering targets at a prespecified impact time and desired Line-of-Sight(LOS)angles in ThreeDimensional(3D)space,this paper proposes a 3D leader-following cooperative interception guidance law.First,in the LOS direction of the leader,an impact time-controlled guidance law is derived based on the fixed-time stability theory,which enables the leader to complete the interception task at a prespecified impact time.Next,in the LOS direction of the followers,by introducing a time consensus tracking error function,a fixed-time consensus tracking guidance law is investigated to guarantee the consensus tracking convergence of the time-to-go.Then,in the direction normal to the LOS,by combining the designed global integral sliding mode surface and the second-order Sliding Mode Control(SMC)theory,an innovative 3D LOS-angle-constrained interception guidance law is developed,which eliminates the reaching phase in the traditional sliding mode guidance laws and effectively saves energy consumption.Moreover,it effectively suppresses the chattering phenomenon while avoiding the singularity issue,and compensates for unknown interference caused by target maneuvering online,making it convenient for practical engineering applications.Finally,theoretical proof analysis and multiple sets of numerical simulation results verify the effectiveness,superiority,and robustness of the investigated guidance law.
基金supported by the National Science Fund for Distinguished Young Scholars(42225107)the National Natural Science Foundation of China(42001326,42371414,42171409,and 42271419)+1 种基金the Natural Science Foundation of Guangdong Province of China(2022A1515012207)the Basic and Applied Basic Research Project of Guangzhou Science and Technology Planning(202201011539)。
文摘Three-dimensional(3D)urban structures play a critical role in informing climate mitigation strategies aimed at the built environment and facilitating sustainable urban development.Regrettably,there exists a significant gap in detailed and consistent data on 3D building space structures with global coverage due to the challenges inherent in the data collection and model calibration processes.In this study,we constructed a global urban structure(GUS-3D)dataset,including building volume,height,and footprint information,at a 500 m spatial resolution using extensive satellite observation products and numerous reference building samples.Our analysis indicated that the total volume of buildings worldwide in2015 exceeded 1×10^(12)m^(3).Over the 1985 to 2015 period,we observed a slight increase in the magnitude of 3D building volume growth(i.e.,it increased from 166.02 km3 during the 1985–2000 period to 175.08km3 during the 2000–2015 period),while the expansion magnitudes of the two-dimensional(2D)building footprint(22.51×10^(3) vs 13.29×10^(3)km^(2))and urban extent(157×10^(3) vs 133.8×10^(3)km^(2))notably decreased.This trend highlights the significant increase in intensive vertical utilization of urban land.Furthermore,we identified significant heterogeneity in building space provision and inequality across cities worldwide.This inequality is particularly pronounced in many populous Asian cities,which has been overlooked in previous studies on economic inequality.The GUS-3D dataset shows great potential to deepen our understanding of the urban environment and creates new horizons for numerous 3D urban studies.
基金Supported by the 2022 Provincial Quality Engineering Project for Higher Education Institutions,No.2022sx031the 2023 Provincial Quality Engineering Project for Higher Education Institutions,No.2023jyxm1071.
文摘BACKGROUND Inguinal hernias are common after surgery.Tension-free repair is widely accepted as the main method for managing inguinal hernias.Adequate exposure,coverage,and repair of the myopectineal orifice(MPO)are necessary.However,due to differences in race and sex,people’s body shapes vary.According to European guidelines,the patch should measure 10 cm×15 cm.If any part of the MPO is dissected,injury to the nerves,vascular network,or organs may occur during surgery,thereby leading to inguinal discomfort,pain,and seroma formation after surgery.Therefore,accurate localization and measurement of the boundary of the MPO are crucial for selecting the optimal patch for inguinal hernia repair.AIM To compare the size of the MPO measured on three-dimensional multislice spiral computed tomography(CT)with that measured via laparoscopy and explore the relevant factors influencing the size of the MPO.METHODS Clinical data from 74 patients who underwent laparoscopic tension-free inguinal hernia repair at the General Surgery Department of the First Affiliated Hospital of Anhui University of Science and Technology between September 2022 and July 2024 were collected and analyzed retrospectively.Transabdominal preperitoneal was performed.Sixty-four males and 10 females,with an average age of 58.30±12.32 years,were included.The clinical data of the patients were collected.The boundary of the MPO was measured on three-dimensional CT images before surgery and then again during transabdominal preperitoneal.All the preoperative and intraoperative data were analyzed via paired t-tests.A t-test was used for comparisons of age,body mass index,and sex between the groups.In the comparative analysis,a P value less than 0.05 indicated a significant difference.RESULTS The boundaries of the MPO on 3-dimensional CT images measured 7.05±0.47 cm and 6.27±0.61 cm,and the area of the MPO was 19.54±3.33 cm^(2).The boundaries of the MPO during surgery were 7.18±0.51 cm and 6.17±0.40 cm.The errors were not statistically significant.However,the intraoperative BD(the width of the MPO,P=0.024,P<0.05)and preoperative AC(the length of the MPO,P=0.045,P<0.05)significantly differed according to sex.The AC and BD measurements before and during surgery were not significantly different according to age,body mass index,hernia side or hernia type(P>0.05).CONCLUSION The application of this technology can aid in determining the most appropriate dissection range and patch size.
文摘In the current era of intelligent technologies,comprehensive and precise regional coverage path planning is critical for tasks such as environmental monitoring,emergency rescue,and agricultural plant protection.Owing to their exceptional flexibility and rapid deployment capabilities,unmanned aerial vehicles(UAVs)have emerged as the ideal platforms for accomplishing these tasks.This study proposes a swarm A^(*)-guided Deep Q-Network(SADQN)algorithm to address the coverage path planning(CPP)problem for UAV swarms in complex environments.Firstly,to overcome the dependency of traditional modeling methods on regular terrain environments,this study proposes an improved cellular decomposition method for map discretization.Simultaneously,a distributed UAV swarm system architecture is adopted,which,through the integration of multi-scale maps,addresses the issues of redundant operations and flight conflicts inmulti-UAV cooperative coverage.Secondly,the heuristic mechanism of the A^(*)algorithmis combinedwith full-coverage path planning,and this approach is incorporated at the initial stage ofDeep Q-Network(DQN)algorithm training to provide effective guidance in action selection,thereby accelerating convergence.Additionally,a prioritized experience replay mechanism is introduced to further enhance the coverage performance of the algorithm.To evaluate the efficacy of the proposed algorithm,simulation experiments were conducted in several irregular environments and compared with several popular algorithms.Simulation results show that the SADQNalgorithmoutperforms othermethods,achieving performance comparable to that of the baseline prior algorithm,with an average coverage efficiency exceeding 2.6 and fewer turning maneuvers.In addition,the algorithm demonstrates excellent generalization ability,enabling it to adapt to different environments.
基金supported by grants from the Human Resources Development program (Grant No.20204010600250)the Training Program of CCUS for the Green Growth (Grant No.20214000000500)by the Korea Institute of Energy Technology Evaluation and Planning (KETEP)funded by the Ministry of Trade,Industry,and Energy of the Korean Government (MOTIE).
文摘It is of great importance to obtain precise trace data,as traces are frequently the sole visible and measurable parameter in most outcrops.The manual recognition and detection of traces on high-resolution three-dimensional(3D)models are relatively straightforward but time-consuming.One potential solution to enhance this process is to use machine learning algorithms to detect the 3D traces.In this study,a unique pixel-wise texture mapper algorithm generates a dense point cloud representation of an outcrop with the precise resolution of the original textured 3D model.A virtual digital image rendering was then employed to capture virtual images of selected regions.This technique helps to overcome limitations caused by the surface morphology of the rock mass,such as restricted access,lighting conditions,and shading effects.After AI-powered trace detection on two-dimensional(2D)images,a 3D data structuring technique was applied to the selected trace pixels.In the 3D data structuring,the trace data were structured through 2D thinning,3D reprojection,clustering,segmentation,and segment linking.Finally,the linked segments were exported as 3D polylines,with each polyline in the output corresponding to a trace.The efficacy of the proposed method was assessed using a 3D model of a real-world case study,which was used to compare the results of artificial intelligence(AI)-aided and human intelligence trace detection.Rosette diagrams,which visualize the distribution of trace orientations,confirmed the high similarity between the automatically and manually generated trace maps.In conclusion,the proposed semi-automatic method was easy to use,fast,and accurate in detecting the dominant jointing system of the rock mass.
基金Project supported by the National Natural Science Foundation of China(Nos.12372071 and 12372070)the Aeronautical Science Fund of China(No.2022Z055052001)the Foundation of China Scholarship Council(No.202306830079)。
文摘Currently,there are a limited number of dynamic models available for braided composite plates with large overall motions,despite the incorporation of three-dimensional(3D)braided composites into rotating blade components.In this paper,a dynamic model of 3D 4-directional braided composite thin plates considering braiding directions is established.Based on Kirchhoff's plate assumptions,the displacement variables of the plate are expressed.By incorporating the braiding directions into the constitutive equation of the braided composites,the dynamic model of the plate considering braiding directions is obtained.The effects of the speeds,braiding directions,and braided angles on the responses of the plate with fixed-axis rotation and translational motion,respectively,are investigated.This paper presents a dynamic theory for calculating the deformation of 3D braided composite structures undergoing both translational and rotational motions.It also provides a simulation method for investigating the dynamic behavior of non-isotropic material plates in various applications.
文摘Liposarcoma is one of the most common soft tissue sarcomas,however,its occurrence rate is still rare compared to other cancers.Due to its rarity,in vitro experiments are an essential approach to elucidate liposarcoma pathobiology.Conventional cell culture-based research(2D cell culture)is still playing a pivotal role,while several shortcomings have been recently under discussion.In vivo,mouse models are usually adopted for pre-clinical analyses with expectations to overcome the issues of 2D cell culture.However,they do not fully recapitulate human dedifferentiated liposarcoma(DDLPS)characteristics.Therefore,three-dimensional(3D)culture systems have been the recent research focus in the cell biology field with the expectation to overcome at the same time the disadvantages of 2D cell culture and in vivo animal models and fill in the gap between them.Given the liposarcoma rarity,we believe that 3D cell culture techniques,including 3D cell cultures/co-cultures,and Patient-Derived tumor Organoids(PDOs),represent a promising approach to facilitate liposarcoma investigation and elucidate its molecular mechanisms and effective therapy development.In this review,we first provide a general overview of 3D cell cultures compared to 2D cell cultures.We then focus on one of the recent 3D cell culture applications,Patient-Derived Organoids(PDOs),summarizing and discussing several PDO methodologies.Finally,we discuss the current and future applications of PDOs to sarcoma,particularly in the field of liposarcoma.
基金supported by the National Science Foundation of China(Nos.81373970,81773902,81973484,and 32171402)the National College Students Innovation and Entrepreneurship Training Program(No.201810315019)+4 种基金the Postgraduate Research and Practice Innovation Program of Jiangsu Province(Nos.SJCX21_0712 and KYCX23_2052)the Scientific Research Project of Jiangsu Provincial Association of Traditional Chinese Medicine(No.XYLD2024013)the Youth Scientific Research Project of Jiangyin Municipal Health Commission(No.Q202402)the Natural Science Foundation Project of Nanjing University of Chinese Medicine(No.XZR2024173)the Jiangyin Science and Technology Innovation Special Fund Project(No.JY0603A011014230032PB),China.
文摘Bone repair remains an important target in tissue engineering,making the development of bioactive scaffolds for effective bone defect repair a critical objective.In this study,β-tricalcium phosphate(β-TCP)scaffolds incorporated with processed pyritum decoction(PPD)were fabricated using three-dimensional(3D)printing-assisted freeze-casting.The produced composite scaffolds were evaluated for their mechanical strength,physicochemical properties,biocompatibility,in vitro proangiogenic activity,and in vivo efficacy in repairing rabbit femoral defects.They not only demonstrated excellent physicochemical properties,enhanced mechanical strength,and good biosafety but also significantly promoted the proliferation,migration,and aggregation of pro-angiogenic human umbilical vein endothelial cells(HUVECs).In vivo studies revealed that all scaffold groups facilitated osteogenesis at the bone defect site,with theβ-TCP scaffolds loaded with PPD markedly enhancing the expression of neurogenic locus Notch homolog protein 1(Notch1),vascular endothelial growth factor(VEGF),bone morphogenetic protein-2(BMP-2),and osteopontin(OPN).Overall,the scaffolds developed in this study exhibited strong angiogenic and osteogenic capabilities both in vitro and in vivo.The incorporation of PPD notably promoted the angiogenic-osteogenic coupling,thereby accelerating bone repair,which suggests that PPD is a promising material for bone repair and that the PPD/β-TCP scaffolds hold great potential as a bone graft alternative.
文摘This study utilized a computer application developed in Visual StudioTM using C# to extract pixel samples (RGB) from multiple images (26 images obtained from August 20, 2024, to September 22, 2024), of a purslane pot taken from a top-down perspective at a distance of 30 cm. These samples were projected into the CIELAB color space, and the extracted pixels were plotted on the a*b* plane, excluding the luminance value. A polygon was then drawn around all the plotted pixels, defining the color to be identified. Subsequently, the application analyzed another image to determine the number of pixels within the polygon. These identified pixels were transformed to white, and the percentage of these pixels relative to the total number of pixels in the image was calculated. This process yielded percentages for brown (soil), green (leaf cover), and pink (stem color). A single polygon was sufficient to accurately identify the green and brown colors in the images. However, due to varying lighting conditions, customized polygons were necessary for each image to accurately identify the stem color. To validate the green polygon’s accuracy in identifying purslane leaves, all leaves in the image were digitized in AutoCADTM, and the green area was compared to the total image area to obtain the observed green percentage. The green percentage obtained with the polygon was then compared to the observed green percentage, resulting in an R2 value of 0.8431. Similarly, for the brown color, an R2 value of 0.9305 was found. The stem color was not subjected to this validation due to the necessity of multiple polygons. The R2 values were derived from percentage data obtained by analyzing the total pixels in the images. When sampling to estimate the proportion and analyzing only the suggested sample size of pixels, R2 values of 0.93049 for brown and 0.8088 for green were obtained. The average analysis time to determine the brown soil percentage using the polygon (BP) for 26 images with an average size of 1070 × 1210 pixels was 44 seconds. In contrast, sampling to estimate the proportion reduced the analysis time to 0.9 seconds for the same number of images. This indicates that significant time savings can be achieved while obtaining similar results.
文摘The development of minimally invasive surgery has transformed the management of gastrointestinal cancer.Notably,three-dimensional visualization systems have increased surgical precision.This editorial discusses a recent study by Shen and Zhang,which compared the clinical applications of naked-eye threedimensional laparoscopic systems vs traditional optical systems in radical surgery for gastric and colorectal cancer.Both systems appeared to yield comparable surgical and oncological outcomes in terms of safety parameters,operating times,and quality of lymph node dissection.However,the spectacle-free system’s technical and logistical limitations hindered its effects on the surgical team’s overall competency.This editorial examines the authors’findings within the broader context of the evolution of oncologic laparoscopy,discusses the relevance of the results in light of the current literature,and proposes future research directions focused on multicenter validation,comprehensive ergonomic analysis,and technological advancements aimed at enhancing intraoperative collaboration.As technology continues to evolve,clinical implementation of new methods must be supported by robust scientific evidence and standardized criteria,to ensure tangible improvements in efficiency,safety,and oncologic outcomes.
基金supported by Guangxi Science and Technology Major Program(No.AA23073008)Hubei Key Laboratory of Water System Science for Sponge City Construction(Wuhan University)(No.2023–05)Nanning Innovation and Entrepreneur Leading Talent Project(No.2021001).
文摘The three-dimensional particle electrode system exhibits significant potential for application in the treatment of wastewater.Nonetheless,the advancement of effective granular electrodes characterized by elevated catalytic activity and minimal energy consumption continues to pose a significant challenge.In this research,Fluorine-doped copper-carbon(F/Cu-GAC)particle electrodes were effectively synthesized through an impregnationcalcination technique,utilizing granular activated carbon as the carrier and fluorinedoped modified copper oxides as the catalytic agents.The particle electrodes were subsequently utilized to promote the degradation of 2,4,6-trichlorophenol(2,4,6-TCP)in a threedimensional electrocatalytic reactor(3DER).The F/Cu-GAC particle electrodes were polarized under the action of electric field,which promoted the heterogeneous Fenton-like reaction in which H2O2 generated by two-electron oxygen reduction reaction(2e-ORR)of O_(2) was catalytically decomposed to·OH.The 3DER equipped with F/Cu-GAC particle electrodes showed 100%removal of 2,4,6-TCP and 79.24%removal of TOC with a specific energy consumption(EC)of approximately 0.019 kWh/g·COD after 2 h of operation.The F/Cu-GAC particle electrodes exhibited an overpotential of 0.38 V and an electrochemically active surface area(ECSA)of 715 cm^(2),as determined through linear sweep voltammetry(LSV)and cyclic voltammetry(CV)assessments.These findings suggest a high level of electrocatalytic performance.Furthermore,the catalytic mechanism of the 3DER equipped with F/Cu-GAC particle electrodes was elucidated through the application of X-ray photoelectron spectroscopy(XPS),electron spin resonance(ESR),and active species capture experiments.This investigation offers a novel approach for the effective degradation of 2,4,6-TCP.
基金National Natural Science Foundation of China(Grant No.52472417)to provide fund for conducting experiments.
文摘Complex multi-area collaborative coverage path planning in dynamic environments poses a significant challenge for multi-fixed-wing UAVs(multi-UAV).This study establishes a comprehensive framework that incorporates UAV capabilities,terrain,complex areas,and mission dynamics.A novel dynamic collaborative path planning algorithm is introduced,designed to ensure complete coverage of designated areas.This algorithm meticulously optimizes the operation,entry,and transition paths for each UAV,while also establishing evaluation metrics to refine coverage sequences for each area.Additionally,a three-dimensional path is computed utilizing an altitude descent method,effectively integrating twodimensional coverage paths with altitude constraints.The efficacy of the proposed approach is validated through digital simulations and mixed-reality semi-physical experiments across a variety of dynamic scenarios,including both single-area and multi-area coverage by multi-UAV.Results show that the coverage paths generated by this method significantly reduce both computation time and path length,providing a reliable solution for dynamic multi-UAV mission planning in semi-physical environments.
基金supported by the National Natural Science Foundation of China(Grant No.42276001)2024 Qinhuangdao Social Science Development Research Project(Grant No.2024LX206)Hebei Agricultural University Research Project for Talented scholars(Grant No.YJ201835).
文摘Research has shown considerable variability in whitecap coverage(W)under low to moderate wind conditions.During an expedition to the Northwestern Pacific,oceanographic variables and photographic measurements were collected to investigate the influence of wave-induced stress on W within these wind ranges.The friction velocity was recalculated based on turbulent stress,and wind profiles were modified to account for wave-induced stress and swell presence on the sea surface.The study examined W’s relationship with multiple parameters,including friction velocity(u*),breaking wave Reynolds numbers,wavesea Reynolds numbers,and wave age.The analysis utilized both conventional u*and turbulent stress-based friction velocity(u*turb).When utilizing u*turb rather than u*,the estimation model’s fitting results revealed an increase in correlation coefficient(R2)from 0.51 to 0.62,and a decrease in root mean square error(RMSE)from 0.0652 to 0.0574.Additionally,when parameterizing W using the windsea Reynolds number,with u_(*turb) replacing u*and wind wave height substituting mixed wave height,the R^(2) increased from 0.38 to 0.53,and the RMSE decreased from 0.0737 to 0.0668.The results demonstrate that calculating u*using the turbulent stress-based method,along with wind wave height and peak wave speed of mixed waves,yields stronger correlation with W.This correlation improvement stems from the inhibition of wave breaking by swell and wave-induced stress.The integration of turbulent stress and wind wave field measurements enhances the understanding of relationships between W and various parameters.However,swell effects on wind profiles do not substantially affect W estimation using wind speed-related parameters.
基金Sponsored by the Project of Sichuan Landscape and Recreation Research Center(JGYQ2020037).
文摘In this study,CiteSpace software is used to carry out visual analysis on the three-dimensional research literature on urban recreation space from the perspective of compact city theory in the past 20 years,exploring the scientific development trend and research hotspots in this field.The results show that the number of published documents shows a fluctuating upward trend,and the significant growth rate reflects the role of policy orientation in promoting the concept of compact city.The co-occurrence analysis of keywords reveals the research hotspots of“compact city”,“recreation space”and“urban park”,while the emergence of new keywords such as“vertical city”and“spatial justice”indicates the new trend of recent research.The cluster analysis and timeline map further show the evolution of research themes,with“compact city”being the largest cluster and having rich connections with other themes such as“urban design”and“urban park”.
基金supported in part by the National Natural Science Foundation of China under Grants 62071189,62201220 and 62171189by the Key Research and Development Program of Hubei Province under Grant 2021BAA026 and 2020BAB120。
文摘As the problem of surface garbage pollution becomes more serious,it is necessary to improve the efficiency of garbage inspection and picking rather than traditional manual methods.Due to lightness,Unmanned Aerial Vehicles(UAVs)can traverse the entire water surface in a short time through their flight field of view.In addition,Unmanned Surface Vessels(USVs)can provide battery replacement and pick up garbage.In this paper,we innovatively establish a system framework for the collaboration between UAV and USVs,and develop an automatic water cleaning strategy.First,on the basis of the partition principle,we propose a collaborative coverage path algorithm based on UAV off-site takeoff and landing to achieve global inspection.Second,we design a task scheduling and assignment algorithm for USVs to balance the garbage loads based on the particle swarm optimization algorithm.Finally,based on the swarm intelligence algorithm,we also design an autonomous obstacle avoidance path planning algorithm for USVs to realize autonomous navigation and collaborative cleaning.The system can simultaneously perform inspection and clearance tasks under certain constraints.The simulation results show that the proposed algorithms have higher generality and flexibility while effectively improving computational efficiency and reducing actual cleaning costs compared with other schemes.
文摘Background:Globally,the use of community pharmacies and pharmacists in the delivery of vaccination services has been hampered by several factors,laws,and regulations that do not support pharmacists to participate in the delivery of vaccination services.With the advent of COVID-19 pandemic,many countries have included community pharmacists and pharmacies in vaccination services to improve coverage.This study described the delivery of vaccination services in community pharmacies using the COVID-19 experience and how their involvement impacted vaccination coverage in Nigeria.It also exposed how this experience can be used to support policy revisions to formally recognize pharmacists in immunization delivery.Methods:A descriptive cross-sectional study was conducted among 474 community pharmacists in two southwestern States in Nigeria,using a semi-structured questionnaire.It determines the number of community pharmacists who have been trained in the delivery of vaccination services,the types of vaccination services provided,and vaccines administered in their pharmacies.Data were analyzed with descriptive and inferential statistics and p-value at≤0.05.Results:Response rate was 86.7%.Less than half of the respondents(40.1%)had undergone vaccination training.Of the 129(31.4%)respondents that provide vaccination services,72(55.8%)administer vaccines in their pharmacies.Out of these 72 respondents;45(62.5%)were administering vaccines before their involvement in COVID-19 vaccine administration;57(79.2%)of the health personnel who administer vaccines were pharmacists;60(83.3%)of them administer vaccines on request;22(30.6%)administered COVID-19 vaccines only;and only 7(9.7%)of the respondents had administered over 500 doses of COVID-19 vaccines.Training in vaccination was associated with the vaccination services provided(p<0.05).Respondents suggested government support through legal framework and policy review,training and empowering pharmacists in vaccine administration,and recognition of community pharmacists as PHC providers.
基金supported by the National Key Research and Development Program of China under Grant 2018YFA0701601by the Program of Jiangsu Province under Grant NTACT-2024-Z-001.
文摘In offshore maritime communication sys-tems,base stations(BSs)are employed along the coastline to provide high-speed data service for ves-sels in coastal sea areas.To ensure the line-of-sight propagation of BS-vessel links,high transceiver an-tenna height is required,which limits the number of geographically available sites for BS deployment,and imposes a high cost for realizing effective wide-area coverage.In this paper,the joint user association and power allocation(JUAPA)problem is investigated to enhance the coverage of offshore maritime systems.By exploiting the characteristics of network topology as well as vessels’motion in offshore communica-tions,a multi-period JUAPA problem is formulated to maximize the number of ships that can be simultane-ously served by the network.This JUAPA problem is intrinsically non-convex and subject to mixed-integer constraints,which is difficult to solve either analyt-ically or numerically.Hence,we propose an iterative augmentation based framework to efficiently select the active vessels,where the JUAPA scheme is iteratively optimized by the network for increasing the number of the selected vessels.More specifically,in each itera-tion,the user association variables and power alloca-tion variables are determined by solving two separate subproblems,so that the JUAPA strategy can be up-dated in a low-complexity manner.The performance of the proposed JUAPA method is evaluated by exten-sive simulation,and numerical results indicate that it can effectively increase the number of vessels served by the network,and thus enhances the coverage of off-shore systems.
