Background:Successful liver resection in oncologic surgery depends on safety,precision,and efficacy,all of which require a thorough understanding of liver anatomy.Contrast-enhanced computed tomography(CT)-generated th...Background:Successful liver resection in oncologic surgery depends on safety,precision,and efficacy,all of which require a thorough understanding of liver anatomy.Contrast-enhanced computed tomography(CT)-generated three-dimensional(3D)models have been proposed as a valuable tool to enhance this understanding.However,a systematic comparison of different display modalities across professional groups has not yet been performed.Methods:In this prospective,monocentric randomized trial,we compared high-resolution twodimensional(2D)CT images of liver malignancies with their corresponding standardized,non-colored 3D virtual and printed models in facilitating anatomical and spatial understanding as well as surgical decision-making.A total of 91 participants,including 40 surgeons,10 radiologists,and 41 students,evaluated six clinical cases(three centrally and three peripherally located liver malignancies).Each participant assessed one central and one peripheral case per display modality,presented in a random order.Results:Compared to 2D CT images,both 3D virtual and printed models significantly improved the identification of tumor location(P<0.001),enhanced the comprehension of spatial relationships with adjacent liver and portal veins(P<0.001 and P=0.019,respectively),and facilitated clinical decisionmaking(P<0.001).No significant difference was observed between virtual and printed models in terms of effectiveness.Within the different groups,surgeons and students,but not radiologists,more accurately identified tumor location and spatial relationships with adjacent liver and portal veins using 3D models.Subjectively,most surgeons and students preferred 3D printed models over virtual models and 2D CT images.Conclusions:This study demonstrated that standardized,non-colored 3D virtual and printed models equally help preoperative anatomical understanding and decision-making,particularly for surgeons and students.By isolating the influence of display modality,our findings clarify prior inconsistent results and support the integration of cost-effective 3D visualization by applying virtual models into surgical planning and education.Preference for printed models despite comparable efficacy highlights the importance of user-centered implementation strategies.展开更多
With the increasing demand for understanding skin physiology and advancing regenerative medicine,in vitro three-dimensional(3D)functional skin tissue models have become vital tools in dermatological research.These mod...With the increasing demand for understanding skin physiology and advancing regenerative medicine,in vitro three-dimensional(3D)functional skin tissue models have become vital tools in dermatological research.These models effectively mimic the complex structure and functions of human skin.This review comprehensively discusses the latest advancements in construction techniques,material selection,and applications of 3D skin models.It highlights the advantages and challenges associated with cutting-edge technologies such as layer-by-layer cell coating,3D bioprinting,bio-spray technology,and photolithographic microfabrication in creating highly realistic skin models.Moreover,it examines the wide-ranging applications of 3D skin models,includingelucidation of skin disease mechanisms,investigation of skin barrier functions,studies on skin aging and repair,hair regeneration,efficacy screening of therapeutic agents,cosmetic safety assessment,and personalized medicine.Finally,this review anticipates future trends in developing 3D skin models with greater structural and functional complexity,enhanced multifunctionality,and improved clinical translation.展开更多
Traumatic brain injury causes permanent cell death and can lead to long-term cognitive dysfunction,with no available treatments to repair the damaged brain tissue.Methods to track and understand traumatic brain injury...Traumatic brain injury causes permanent cell death and can lead to long-term cognitive dysfunction,with no available treatments to repair the damaged brain tissue.Methods to track and understand traumatic brain injury in humans are severely limited by the inaccessibility of living brain tissue,creating a need for in vitro model systems to study cellular mechanisms of degeneration and regeneration following injury.Here we describe methods to establish a 3D human brain tissue model,consisting of a silk-collagen composite scaffold seeded with human neurons,astrocytes,and microglia,to study neuro-regeneration after traumatic brain injury.Step-by-step fabrication,injury,and analytical assessments of the 3D“triculture”system are described.Using this tissue model system,we demonstrate that glial cells promote regeneration of neuronal networks within the injury site over several weeks post-injury.Further,we found that regenerating networks in the 3D triculture tissues did not secrete early markers of neurodegenerative disease,but displayed signs of excitatory/inhibitory imbalance,suggesting that pro-regenerative treatments for traumatic brain injury in the future may need to direct cell differentiation to promote proper function.The mechanical stability of this model system enables physiologically relevant impact injury and long-term culture capability,while its modular design enables modification of cell contents,extracellular matrix composition,and scaffold properties.This adaptability could allow the integration of patient-derived cells and genetic modifications to bridge research and clinical applications focused on personalized targeted therapies.This in vitro system provides a valuable platform for accelerating therapeutic advancements in traumatic brain injury and neurodegenerative disorders,ultimately improving patient outcomes.展开更多
The intracontinental subduction of a>200-km-long section of the Tajik-Tarim lithosphere beneath the Pamir Mountains is proposed to explain nearly 30 km of shortening in the Tajik fold-thrust belt and the Pamir upli...The intracontinental subduction of a>200-km-long section of the Tajik-Tarim lithosphere beneath the Pamir Mountains is proposed to explain nearly 30 km of shortening in the Tajik fold-thrust belt and the Pamir uplift.Seismic imaging revealed that the upper slab was scraped and that the lower slab had subducted to a depth of>150 km.These features constitute the tectonic complexity of the Pamirs,as well as the thermal subduction mechanism involved,which remains poorly understood.Hence,in this study,high-resolution three-dimensional(3D)kinematic modeling is applied to investigate the thermal structure and geometry of the subducting slab beneath the Pamirs.The modeled slab configuration reveals distinct along-strike variations,with a steeply dipping slab beneath the southern Pamirs,a more gently inclined slab beneath the northern Pamirs,and apparent upper slab termination at shallow depths beneath the Pamirs.The thermal field reveals a cold slab core after delamination,with temperatures ranging from 400℃to 800℃,enveloped by a hotter mantle reaching~1400℃.The occurrence of intermediate-depth earthquakes aligns primarily with colder slab regions,particularly near the slab tear-off below the southwestern Pamirs,indicating a strong correlation between slab temperature and seismicity.In contrast,the northern Pamirs exhibit reduced seismicity at depth,which is likely associated with thermal weakening and delamination.The central Pamirs show a significant thermal anomaly caused by a concave slab,where the coldest crust does not descend deeply,further suggesting crustal detachment or mechanical failure.The lateral asymmetry in slab temperature possibly explains the mechanism of lateral tearing and differential slab-mantle coupling.展开更多
Automation and intelligence have become the primary trends in the design of investment casting processes.However,the design of gating and riser systems still lacks precise quantitative evaluation criteria.Numerical si...Automation and intelligence have become the primary trends in the design of investment casting processes.However,the design of gating and riser systems still lacks precise quantitative evaluation criteria.Numerical simulation plays a significant role in quantitatively evaluating current processes and making targeted improvements,but its limitations lie in the inability to dynamically reflect the formation outcomes of castings under varying process conditions,making real-time adjustments to gating and riser designs challenging.In this study,an automated design model for gating and riser systems based on integrated parametric 3D modeling-simulation framework is proposed,which enhances the flexibility and usability of evaluating the casting process by simulation.Firstly,geometric feature extraction technology is employed to obtain the geometric information of the target casting.Based on this information,an automated design framework for gating and riser systems is established,incorporating multiple structural parameters for real-time process control.Subsequently,the simulation results for various structural parameters are analyzed,and the influence of these parameters on casting formation is thoroughly investigated.Finally,the optimal design scheme is generated and validated through experimental verification.Simulation analysis and experimental results show that using a larger gate neck(24 mm in side length) and external risers promotes a more uniform temperature distribution and a more stable flow state,effectively eliminating shrinkage cavities and enhancing process yield by 15%.展开更多
Background:Therapeutic responses of breast cancer vary among patients and lead to drug resistance and recurrence due to the heterogeneity.Current preclinical models,however,are inadequate for predicting individual pat...Background:Therapeutic responses of breast cancer vary among patients and lead to drug resistance and recurrence due to the heterogeneity.Current preclinical models,however,are inadequate for predicting individual patient responses towards different drugs.This study aimed to investigate the patient-derived breast cancer culture models for drug sensitivity evaluations.Methods:Tumor and adjacent tissues from female breast cancer patients were collected during surgery.Patient-derived breast cancer cells were cultured using the conditional reprogramming technique to establish 2D models.The obtained patient-derived conditional reprogramming breast cancer(CRBC)cells were subsequently embedded in alginate-gelatin methacryloyl hydrogel microspheres to form 3D culture models.Comparisons between 2D and 3D models were made using immunohistochemistry(tumor markers),MTS assays(cell viability),flow cytometry(apoptosis),transwell assays(migration),and Western blotting(protein expression).Drug sensitivity tests were conducted to evaluate patient-specific responses to anti-cancer agents.Results:2D and 3D culture models were successfully established using samples from eight patients.The 3D models retained histological and marker characteristics of the original tumors.Compared to 2D cultures,3D models exhibited increased apoptosis,enhanced drug resistance,elevated stem cell marker expression,and greater migration ability—features more reflective of in vivo tumor behavior.Conclusion:Patient-derived 3D CRBC models effectively mimic the in vivo tumor microenvironment and demonstrate stronger resistance to anti-cancer drugs than 2D models.These hydrogel-based models offer a cost-effective and clinically relevant platform for drug screening and personalized breast cancer treatment.展开更多
Existing methods for tracing water pollution sources typically integrate three-dimensional excitationemission matrix(3D-EEM)fluorescence spectroscopy with similarity-based matching algorithms.However,these approaches ...Existing methods for tracing water pollution sources typically integrate three-dimensional excitationemission matrix(3D-EEM)fluorescence spectroscopy with similarity-based matching algorithms.However,these approaches exhibit high error rates in borderline cases and necessitate expert manual review,which limits scalability and introduces inconsistencies between algorithmic outputs and expert judgment.To address these limitations,we propose a large vision-language model(VLM)designed as an“expert agent”to automatically refine similarity scores,ensuring alignment with expert decisions and overcoming key application bottlenecks.The model consists of two core components:(1)rule-based similarity calculation module generate initial spectral similarity scores,and(2)pre-trained large vision-language model fine-tuned via supervised learning and reinforcement learning with human feedback(RLHF)to emulate expert assessments.To facilitate training and evaluation,we introduce two expert-annotated datasets,Spec1k and SpecReason,which capture both quantitative corrections and qualitative reasoning patterns,allowing the model to emulate expert decision-making processes.Experimental results demonstrate that our method achieves 81.45%source attribution accuracy,38.24%higher than rule-based and machine learning baselines.Real-world deployment further validates its effectiveness.展开更多
Currently,there are a limited number of dynamic models available for braided composite plates with large overall motions,despite the incorporation of three-dimensional(3D)braided composites into rotating blade compone...Currently,there are a limited number of dynamic models available for braided composite plates with large overall motions,despite the incorporation of three-dimensional(3D)braided composites into rotating blade components.In this paper,a dynamic model of 3D 4-directional braided composite thin plates considering braiding directions is established.Based on Kirchhoff's plate assumptions,the displacement variables of the plate are expressed.By incorporating the braiding directions into the constitutive equation of the braided composites,the dynamic model of the plate considering braiding directions is obtained.The effects of the speeds,braiding directions,and braided angles on the responses of the plate with fixed-axis rotation and translational motion,respectively,are investigated.This paper presents a dynamic theory for calculating the deformation of 3D braided composite structures undergoing both translational and rotational motions.It also provides a simulation method for investigating the dynamic behavior of non-isotropic material plates in various applications.展开更多
It is of great importance to obtain precise trace data,as traces are frequently the sole visible and measurable parameter in most outcrops.The manual recognition and detection of traces on high-resolution three-dimens...It is of great importance to obtain precise trace data,as traces are frequently the sole visible and measurable parameter in most outcrops.The manual recognition and detection of traces on high-resolution three-dimensional(3D)models are relatively straightforward but time-consuming.One potential solution to enhance this process is to use machine learning algorithms to detect the 3D traces.In this study,a unique pixel-wise texture mapper algorithm generates a dense point cloud representation of an outcrop with the precise resolution of the original textured 3D model.A virtual digital image rendering was then employed to capture virtual images of selected regions.This technique helps to overcome limitations caused by the surface morphology of the rock mass,such as restricted access,lighting conditions,and shading effects.After AI-powered trace detection on two-dimensional(2D)images,a 3D data structuring technique was applied to the selected trace pixels.In the 3D data structuring,the trace data were structured through 2D thinning,3D reprojection,clustering,segmentation,and segment linking.Finally,the linked segments were exported as 3D polylines,with each polyline in the output corresponding to a trace.The efficacy of the proposed method was assessed using a 3D model of a real-world case study,which was used to compare the results of artificial intelligence(AI)-aided and human intelligence trace detection.Rosette diagrams,which visualize the distribution of trace orientations,confirmed the high similarity between the automatically and manually generated trace maps.In conclusion,the proposed semi-automatic method was easy to use,fast,and accurate in detecting the dominant jointing system of the rock mass.展开更多
Liposarcoma is one of the most common soft tissue sarcomas,however,its occurrence rate is still rare compared to other cancers.Due to its rarity,in vitro experiments are an essential approach to elucidate liposarcoma ...Liposarcoma is one of the most common soft tissue sarcomas,however,its occurrence rate is still rare compared to other cancers.Due to its rarity,in vitro experiments are an essential approach to elucidate liposarcoma pathobiology.Conventional cell culture-based research(2D cell culture)is still playing a pivotal role,while several shortcomings have been recently under discussion.In vivo,mouse models are usually adopted for pre-clinical analyses with expectations to overcome the issues of 2D cell culture.However,they do not fully recapitulate human dedifferentiated liposarcoma(DDLPS)characteristics.Therefore,three-dimensional(3D)culture systems have been the recent research focus in the cell biology field with the expectation to overcome at the same time the disadvantages of 2D cell culture and in vivo animal models and fill in the gap between them.Given the liposarcoma rarity,we believe that 3D cell culture techniques,including 3D cell cultures/co-cultures,and Patient-Derived tumor Organoids(PDOs),represent a promising approach to facilitate liposarcoma investigation and elucidate its molecular mechanisms and effective therapy development.In this review,we first provide a general overview of 3D cell cultures compared to 2D cell cultures.We then focus on one of the recent 3D cell culture applications,Patient-Derived Organoids(PDOs),summarizing and discussing several PDO methodologies.Finally,we discuss the current and future applications of PDOs to sarcoma,particularly in the field of liposarcoma.展开更多
Background:Traditional imaging approaches to keratoconus(KCN)have thus far failed to produce a standardized approach for diagnosis.While many diagnostic modalities and metrics exist,none have proven robust enough to b...Background:Traditional imaging approaches to keratoconus(KCN)have thus far failed to produce a standardized approach for diagnosis.While many diagnostic modalities and metrics exist,none have proven robust enough to be considered a gold standard.This study aims to introduce novel metrics to differentiate between KCN and healthy corneas using three-dimensional(3D)measurements of surface area and volume.Methods:This retrospective observational study examined KCN patients along with healthy control patients between the ages of 20 and 79 years old at the University of Maryland,Baltimore.The selected patients underwent a nine-line raster scan anterior segment optical coherence tomography(AS-OCT).ImageJ was used to determine the central 6 mm of each image and each corneal image was then divided into six 1 mm segments.Free-D software was then used to render the nine different images into a 3D model to calculate corneal surface area and volume.A two-tailed Mann-Whitney test was used to assess statistical significance when comparing these subsets.Results:Thirty-three eyes with KCN,along with 33 healthy control,were enrolled.There were statistically significant differences between the healthy and KCN groups in the metric of anterior corneal surface area(13.927 vs.13.991 mm^(2),P=0.046),posterior corneal surface area(14.045 vs.14.173 mm^(2),P<0.001),and volume(8.430 vs.7.773 mm3,P<0.001)within the central 6 mm.Conclusions:3D corneal models derived from AS-OCT can be used to measure anterior corneal surface area,posterior corneal surface area,and corneal volume.All three parameters are statistically different between corneas with KCN and healthy corneas.Further study and application of these parameters may yield new methodologies for the detection of KCN.展开更多
The development of digital twins for geotechnical structures necessitates the real-time updates of threedimensional(3D)virtual models(e.g.numerical finite element method(FEM)model)to accurately predict time-varying ge...The development of digital twins for geotechnical structures necessitates the real-time updates of threedimensional(3D)virtual models(e.g.numerical finite element method(FEM)model)to accurately predict time-varying geotechnical responses(e.g.consolidation settlement)in a 3D spatial domain.However,traditional 3D numerical model updating approaches are computationally prohibitive and therefore difficult to update the 3D responses in real time.To address these challenges,this study proposes a novel machine learning framework called sparse dictionary learning(T-3D-SDL)for real-time updating of time-varying 3D geotechnical responses.In T-3D-SDL,a concerned dataset(e.g.time-varying 3D settlement)is approximated as a linear superposition of dictionary atoms generated from 3D random FEM analyses.Field monitoring data are then used to identify non-trivial atoms and estimate their weights within a Bayesian framework for model updating and prediction.The proposed approach enables the real-time update of temporally varying settlements with a high 3D spatial resolution and quantified uncertainty as field monitoring data evolve.The proposed approach is illustrated using an embankment construction project.The results show that the proposed approach effectively improves settlement predictions along temporal and 3D spatial dimensions,with minimal latency(e.g.within minutes),as monitoring data appear.In addition,the proposed approach requires only a reasonably small number of 3D FEM model evaluations,avoids the use of widely adopted yet often criticized surrogate models,and effectively addresses the limitations(e.g.computational inefficiency)of existing 3D model updating approaches.展开更多
A numerical investigation on the effectiveness of the actuator disc method in producing the interactions of multiple tidal stream devices via the 3D-RANS finite element model Telemac3D is explored. The methodology for...A numerical investigation on the effectiveness of the actuator disc method in producing the interactions of multiple tidal stream devices via the 3D-RANS finite element model Telemac3D is explored. The methodology for the implementation of the source term to represent an array of 20 m rotor diameter turbines deployed in an idealized channel is reviewed and discussed in detail. Flow interactions between multiple turbines are investigated for a single row arrangement with only two turbines and a two row arrangement containing three turbines. The results demonstrate that the non-hydrostatic solver shows better agreement when validated against published experimental data. Notably,the mesh density at the device location can strongly influence the simulated thrust from the disc. Although the actuator disc model can generally replicate the wake interactions well, the results indicate that it cannot accurately characterize the flow for regions with high turbulences. While a model setup with the largest lateral spacing(1.5D) demonstrates excellent agreement with the experimental data, the 0.5D model(smallest gap) deviates by up to 25%. These findings demonstrate the effectiveness of the applied source term in reproducing the wake profile, which is comparable with the published data, and highlight the inherent nature of the RANS and actuator disc models.展开更多
3D model classification has emerged as a significant research focus in computer vision.However,traditional convolutional neural networks(CNNs)often struggle to capture global dependencies across both height and width ...3D model classification has emerged as a significant research focus in computer vision.However,traditional convolutional neural networks(CNNs)often struggle to capture global dependencies across both height and width dimensions simultaneously,leading to limited feature representation capabilities when handling complex visual tasks.To address this challenge,we propose a novel 3D model classification network named ViT-GE(Vision Transformer with Global and Efficient Attention),which integrates Global Grouped Coordinate Attention(GGCA)and Efficient Channel Attention(ECA)mechanisms.Specifically,the Vision Transformer(ViT)is employed to extract comprehensive global features from multi-view inputs using its self-attention mechanism,effectively capturing 3D shape characteristics.To further enhance spatial feature modeling,the GGCA module introduces a grouping strategy and global context interactions.Concurrently,the ECA module strengthens inter-channel information flow,enabling the network to adaptively emphasize key features and improve feature fusion.Finally,a voting mechanism is adopted to enhance classification accuracy,robustness,and stability.Experimental results on the ModelNet10 dataset demonstrate that our method achieves a classification accuracy of 93.50%,validating its effectiveness and superior performance.展开更多
Constructing an in vitro vascularized liver tissue model that closely simulates the human liver is crucial for promoting cell proliferation,mimicking physiological heterogeneous structures,and recreating the cellular ...Constructing an in vitro vascularized liver tissue model that closely simulates the human liver is crucial for promoting cell proliferation,mimicking physiological heterogeneous structures,and recreating the cellular microenvironment.However,the layer-by-layer printing method is significantly constrained by the rheological properties of the bioink,making it challenging to form complex three-dimensional vascular structures in low-viscosity soft materials.To overcome this limitation,we developed a cross-linkable biphasic embedding medium by mixing low-viscosity biomaterials with gelatin microgel.This medium possesses yield stress and self-healing properties,facilitating efficient and continuous three-dimensional shaping of sacrificial ink within it.By adjusting the printing speed,we controlled the filament diameter,achieving a range from 250μm to 1000μm,and ensuring precise control over ink deposition locations and filament shapes.Using the in situ endothelialization method,we constructed complex vascular structures and ensured close adhesion between hepatocytes and endothelial cells.In vitro experiments demonstrated that the vascularized liver tissue model exhibited enhanced protein synthesis and metabolic function compared to mixed liver tissue.We also investigated the impact of varying vascular densities on liver tissue function.Transcriptome sequencing revealed that liver tissues with higher vascular density exhibited upregulated gene expression in metabolic and angiogenesis-related pathways.In summary,this method is adaptable to various materials,allowing the rheological properties of the supporting bath and the tissue's porosity to be modified using microgels,thus enabling precise regulation of the liver tissue microenvironment.Additionally,it facilitates the rapid construction of three-dimensional vascular structures within liver tissue.The resulting vascularized liver tissue model exhibits enhanced biological functionality,opening new opportunities for biomedical applications.展开更多
Typically,seat or floor acceleration is used to evaluate the ride comfort of a high-speed train.However,the dynamic performance of the human body significantly differs from that of the floor.Therefore,using the car bo...Typically,seat or floor acceleration is used to evaluate the ride comfort of a high-speed train.However,the dynamic performance of the human body significantly differs from that of the floor.Therefore,using the car body floor and seat accelerations to calculate the ride comfort index of a high-speed train may not reflect the true feelings of passengers.In this study,a 3D human-seat-vehicle-track coupling model was established to investigate the ride comfort of highspeed train passengers.The seated human model,which considers the longitudinal,lateral,vertical,pitching,yawing,and rolling motions,comprises the head,upper torso,lower torso,pelvis,thighs,and shanks.The model parameters were determined using multi-axis excitation measurement data based on a genetic algorithm.Subsequently,the applicability of the small-angle assumption and natural modes of the human model is analyzed.Using the coupling system model,the vibration characteristics of the human-seat interaction surface were analyzed.The ride comfort of the high-speed train and human body dynamic performance were analyzed under normal conditions,track geometric irregularities and train meeting conditions.The results showed that the passenger seats in the front and rear rows adjacent to the window had a higher acceleration value than the others.The human backrest and seat pad connection points have higher vibration amplitudes than the car body floor in the human-sensitive frequency range,indicating that using the acceleration values on the floor may underestimate the discomfort of passengers.The ride comfort of high-speed trains diminishes in the presence of track geometric irregularities and when trains pass each other.When the excitation frequency of track geometry irregularities approached the natural frequency of the human-seat-vehicle system,ride comfort in high-speed trains decreased significantly.Moreover,using seat acceleration to evaluate passenger ride comfort overlooks the vibration characteristics of the human body.The transient aerodynamic force generated when the train meets can cause a larger car body roll and lateral motion at 2 Hz,which,in turn,decreases the passenger ride comfort.This study presents a detailed human-seat-vehicle-track coupling system that can reflect a passenger’s dynamic performance under complex operating conditions.展开更多
In this work,the computational complexity of a spin-glass three-dimensional(3D)Ising model(for the lattice sizeN=lmn,wherel,m,n are thenumbersof lattice points along three crystallographic directions)is studied.We pro...In this work,the computational complexity of a spin-glass three-dimensional(3D)Ising model(for the lattice sizeN=lmn,wherel,m,n are thenumbersof lattice points along three crystallographic directions)is studied.We prove that an absolute minimum core(AMC)model consisting of a spin-glass 2D Ising model interacting with its nearest neighboring plane,has its computational complexity O(2mn).Any algorithms to make the model smaller(or simpler)than the AMC model will cut the basic element of the spin-glass 3D Ising model and lost many important information of the original model.Therefore,the computational complexity of the spin-glass 3D Ising model cannot be reduced to be less than O(2mn)by any algorithms,which is in subexponential time,superpolynomial.展开更多
Three-dimensional modeling of virtual hoisting machinery is the critical works to structure the system of virtual construction, and the foundation to realize intelligent and interactive virtual hoisting. Aimed at enha...Three-dimensional modeling of virtual hoisting machinery is the critical works to structure the system of virtual construction, and the foundation to realize intelligent and interactive virtual hoisting. Aimed at enhancing the requests of image quality and stability of the virtual construction scene, taking a tower crane for example. We studied the technology of three-dimensional modeling and optimization of a virtual tower crane, and a method named two-stage model optimization was put forward. This depended on the modeling stage using Solidworks and 3DS Max and the performance optimization stage in EON. The practice of software development indicates that the proposed methods of three-dimensional modeling and optimization could satisfy the performance request of virtual construction system and be popularized to other virtual system.展开更多
To speed up three-dimensional （3D） DC resistivity modeling, we present a new multigrid method, the aggregation-based algebraic multigrid method （AGMG）. We first discretize the differential equation of the secondar...To speed up three-dimensional （3D） DC resistivity modeling, we present a new multigrid method, the aggregation-based algebraic multigrid method （AGMG）. We first discretize the differential equation of the secondary potential field with mixed boundary conditions by using a seven-point finite-difference method to obtain a large sparse system of linear equations. Then, we introduce the theory behind the pairwise aggregation algorithms for AGMG and use the conjugate-gradient method with the V-cycle AGMG preconditioner （AGMG-CG） to solve the linear equations. We use typical geoelectrical models to test the proposed AGMG-CG method and compare the results with analytical solutions and the 3DDCXH algorithm for 3D DC modeling （3DDCXH）. In addition, we apply the AGMG-CG method to different grid sizes and geoelectrical models and compare it to different iterative methods, such as ILU-BICGSTAB, ILU-GCR, and SSOR-CG. The AGMG-CG method yields nearly linearly decreasing errors, whereas the number of iterations increases slowly with increasing grid size. The AGMG-CG method is precise and converges fast, and thus can improve the computational efficiency in forward modeling of three-dimensional DC resistivity.展开更多
Generally, FD coefficients can be obtained by using Taylor series expansion （TE） or optimization methods to minimize the dispersion error. However, the TE-based FD method only achieves high modeling precision over a...Generally, FD coefficients can be obtained by using Taylor series expansion （TE） or optimization methods to minimize the dispersion error. However, the TE-based FD method only achieves high modeling precision over a limited range of wavenumbers, and produces large numerical dispersion beyond this range. The optimal FD scheme based on least squares （LS） can guarantee high precision over a larger range of wavenumbers and obtain the best optimization solution at small computational cost. We extend the LS-based optimal FD scheme from two-dimensional （2D） forward modeling to three-dimensional （3D） and develop a 3D acoustic optimal FD method with high efficiency, wide range of high accuracy and adaptability to parallel computing. Dispersion analysis and forward modeling demonstrate that the developed FD method suppresses numerical dispersion. Finally, we use the developed FD method to source wavefield extrapolation and receiver wavefield extrapolation in 3D RTM. To decrease the computation time and storage requirements, the 3D RTM is implemented by combining the efficient boundary storage with checkpointing strategies on GPU. 3D RTM imaging results suggest that the 3D optimal FD method has higher precision than conventional methods.展开更多
文摘Background:Successful liver resection in oncologic surgery depends on safety,precision,and efficacy,all of which require a thorough understanding of liver anatomy.Contrast-enhanced computed tomography(CT)-generated three-dimensional(3D)models have been proposed as a valuable tool to enhance this understanding.However,a systematic comparison of different display modalities across professional groups has not yet been performed.Methods:In this prospective,monocentric randomized trial,we compared high-resolution twodimensional(2D)CT images of liver malignancies with their corresponding standardized,non-colored 3D virtual and printed models in facilitating anatomical and spatial understanding as well as surgical decision-making.A total of 91 participants,including 40 surgeons,10 radiologists,and 41 students,evaluated six clinical cases(three centrally and three peripherally located liver malignancies).Each participant assessed one central and one peripheral case per display modality,presented in a random order.Results:Compared to 2D CT images,both 3D virtual and printed models significantly improved the identification of tumor location(P<0.001),enhanced the comprehension of spatial relationships with adjacent liver and portal veins(P<0.001 and P=0.019,respectively),and facilitated clinical decisionmaking(P<0.001).No significant difference was observed between virtual and printed models in terms of effectiveness.Within the different groups,surgeons and students,but not radiologists,more accurately identified tumor location and spatial relationships with adjacent liver and portal veins using 3D models.Subjectively,most surgeons and students preferred 3D printed models over virtual models and 2D CT images.Conclusions:This study demonstrated that standardized,non-colored 3D virtual and printed models equally help preoperative anatomical understanding and decision-making,particularly for surgeons and students.By isolating the influence of display modality,our findings clarify prior inconsistent results and support the integration of cost-effective 3D visualization by applying virtual models into surgical planning and education.Preference for printed models despite comparable efficacy highlights the importance of user-centered implementation strategies.
文摘With the increasing demand for understanding skin physiology and advancing regenerative medicine,in vitro three-dimensional(3D)functional skin tissue models have become vital tools in dermatological research.These models effectively mimic the complex structure and functions of human skin.This review comprehensively discusses the latest advancements in construction techniques,material selection,and applications of 3D skin models.It highlights the advantages and challenges associated with cutting-edge technologies such as layer-by-layer cell coating,3D bioprinting,bio-spray technology,and photolithographic microfabrication in creating highly realistic skin models.Moreover,it examines the wide-ranging applications of 3D skin models,includingelucidation of skin disease mechanisms,investigation of skin barrier functions,studies on skin aging and repair,hair regeneration,efficacy screening of therapeutic agents,cosmetic safety assessment,and personalized medicine.Finally,this review anticipates future trends in developing 3D skin models with greater structural and functional complexity,enhanced multifunctionality,and improved clinical translation.
基金supported by funding from the U.S.Department of Defense,Nos.W911NF-23-1-0276,W81XWH2211065the NIH,No.P41EB027062(all to DLK).
文摘Traumatic brain injury causes permanent cell death and can lead to long-term cognitive dysfunction,with no available treatments to repair the damaged brain tissue.Methods to track and understand traumatic brain injury in humans are severely limited by the inaccessibility of living brain tissue,creating a need for in vitro model systems to study cellular mechanisms of degeneration and regeneration following injury.Here we describe methods to establish a 3D human brain tissue model,consisting of a silk-collagen composite scaffold seeded with human neurons,astrocytes,and microglia,to study neuro-regeneration after traumatic brain injury.Step-by-step fabrication,injury,and analytical assessments of the 3D“triculture”system are described.Using this tissue model system,we demonstrate that glial cells promote regeneration of neuronal networks within the injury site over several weeks post-injury.Further,we found that regenerating networks in the 3D triculture tissues did not secrete early markers of neurodegenerative disease,but displayed signs of excitatory/inhibitory imbalance,suggesting that pro-regenerative treatments for traumatic brain injury in the future may need to direct cell differentiation to promote proper function.The mechanical stability of this model system enables physiologically relevant impact injury and long-term culture capability,while its modular design enables modification of cell contents,extracellular matrix composition,and scaffold properties.This adaptability could allow the integration of patient-derived cells and genetic modifications to bridge research and clinical applications focused on personalized targeted therapies.This in vitro system provides a valuable platform for accelerating therapeutic advancements in traumatic brain injury and neurodegenerative disorders,ultimately improving patient outcomes.
基金the Chinese Academy of Sciences Pioneer Hundred Talents Program and the Second Tibetan Plateau Scientific Expedition and Research Program(Grant No.2019QZKK0708)supported by a MEXT(Ministry of Education,Culture,Sports,Science and Technology)KAKENHI(Grants-in-Aid for Scientific Research)grant(Grant No.21H05203)Kobe University Strategic International Collaborative Research Grant(Type B Fostering Joint Research).
文摘The intracontinental subduction of a>200-km-long section of the Tajik-Tarim lithosphere beneath the Pamir Mountains is proposed to explain nearly 30 km of shortening in the Tajik fold-thrust belt and the Pamir uplift.Seismic imaging revealed that the upper slab was scraped and that the lower slab had subducted to a depth of>150 km.These features constitute the tectonic complexity of the Pamirs,as well as the thermal subduction mechanism involved,which remains poorly understood.Hence,in this study,high-resolution three-dimensional(3D)kinematic modeling is applied to investigate the thermal structure and geometry of the subducting slab beneath the Pamirs.The modeled slab configuration reveals distinct along-strike variations,with a steeply dipping slab beneath the southern Pamirs,a more gently inclined slab beneath the northern Pamirs,and apparent upper slab termination at shallow depths beneath the Pamirs.The thermal field reveals a cold slab core after delamination,with temperatures ranging from 400℃to 800℃,enveloped by a hotter mantle reaching~1400℃.The occurrence of intermediate-depth earthquakes aligns primarily with colder slab regions,particularly near the slab tear-off below the southwestern Pamirs,indicating a strong correlation between slab temperature and seismicity.In contrast,the northern Pamirs exhibit reduced seismicity at depth,which is likely associated with thermal weakening and delamination.The central Pamirs show a significant thermal anomaly caused by a concave slab,where the coldest crust does not descend deeply,further suggesting crustal detachment or mechanical failure.The lateral asymmetry in slab temperature possibly explains the mechanism of lateral tearing and differential slab-mantle coupling.
基金financially supported by the National Key Research and Development Program of China (2022YFB3706802)。
文摘Automation and intelligence have become the primary trends in the design of investment casting processes.However,the design of gating and riser systems still lacks precise quantitative evaluation criteria.Numerical simulation plays a significant role in quantitatively evaluating current processes and making targeted improvements,but its limitations lie in the inability to dynamically reflect the formation outcomes of castings under varying process conditions,making real-time adjustments to gating and riser designs challenging.In this study,an automated design model for gating and riser systems based on integrated parametric 3D modeling-simulation framework is proposed,which enhances the flexibility and usability of evaluating the casting process by simulation.Firstly,geometric feature extraction technology is employed to obtain the geometric information of the target casting.Based on this information,an automated design framework for gating and riser systems is established,incorporating multiple structural parameters for real-time process control.Subsequently,the simulation results for various structural parameters are analyzed,and the influence of these parameters on casting formation is thoroughly investigated.Finally,the optimal design scheme is generated and validated through experimental verification.Simulation analysis and experimental results show that using a larger gate neck(24 mm in side length) and external risers promotes a more uniform temperature distribution and a more stable flow state,effectively eliminating shrinkage cavities and enhancing process yield by 15%.
基金supported by the Natural Science Foundation of Guangdong Province(No.2021B1515120053)Guangdong Basic and Applied Basic Research Foundation(Grant No.2024A1515140166).
文摘Background:Therapeutic responses of breast cancer vary among patients and lead to drug resistance and recurrence due to the heterogeneity.Current preclinical models,however,are inadequate for predicting individual patient responses towards different drugs.This study aimed to investigate the patient-derived breast cancer culture models for drug sensitivity evaluations.Methods:Tumor and adjacent tissues from female breast cancer patients were collected during surgery.Patient-derived breast cancer cells were cultured using the conditional reprogramming technique to establish 2D models.The obtained patient-derived conditional reprogramming breast cancer(CRBC)cells were subsequently embedded in alginate-gelatin methacryloyl hydrogel microspheres to form 3D culture models.Comparisons between 2D and 3D models were made using immunohistochemistry(tumor markers),MTS assays(cell viability),flow cytometry(apoptosis),transwell assays(migration),and Western blotting(protein expression).Drug sensitivity tests were conducted to evaluate patient-specific responses to anti-cancer agents.Results:2D and 3D culture models were successfully established using samples from eight patients.The 3D models retained histological and marker characteristics of the original tumors.Compared to 2D cultures,3D models exhibited increased apoptosis,enhanced drug resistance,elevated stem cell marker expression,and greater migration ability—features more reflective of in vivo tumor behavior.Conclusion:Patient-derived 3D CRBC models effectively mimic the in vivo tumor microenvironment and demonstrate stronger resistance to anti-cancer drugs than 2D models.These hydrogel-based models offer a cost-effective and clinically relevant platform for drug screening and personalized breast cancer treatment.
文摘Existing methods for tracing water pollution sources typically integrate three-dimensional excitationemission matrix(3D-EEM)fluorescence spectroscopy with similarity-based matching algorithms.However,these approaches exhibit high error rates in borderline cases and necessitate expert manual review,which limits scalability and introduces inconsistencies between algorithmic outputs and expert judgment.To address these limitations,we propose a large vision-language model(VLM)designed as an“expert agent”to automatically refine similarity scores,ensuring alignment with expert decisions and overcoming key application bottlenecks.The model consists of two core components:(1)rule-based similarity calculation module generate initial spectral similarity scores,and(2)pre-trained large vision-language model fine-tuned via supervised learning and reinforcement learning with human feedback(RLHF)to emulate expert assessments.To facilitate training and evaluation,we introduce two expert-annotated datasets,Spec1k and SpecReason,which capture both quantitative corrections and qualitative reasoning patterns,allowing the model to emulate expert decision-making processes.Experimental results demonstrate that our method achieves 81.45%source attribution accuracy,38.24%higher than rule-based and machine learning baselines.Real-world deployment further validates its effectiveness.
基金Project supported by the National Natural Science Foundation of China(Nos.12372071 and 12372070)the Aeronautical Science Fund of China(No.2022Z055052001)the Foundation of China Scholarship Council(No.202306830079)。
文摘Currently,there are a limited number of dynamic models available for braided composite plates with large overall motions,despite the incorporation of three-dimensional(3D)braided composites into rotating blade components.In this paper,a dynamic model of 3D 4-directional braided composite thin plates considering braiding directions is established.Based on Kirchhoff's plate assumptions,the displacement variables of the plate are expressed.By incorporating the braiding directions into the constitutive equation of the braided composites,the dynamic model of the plate considering braiding directions is obtained.The effects of the speeds,braiding directions,and braided angles on the responses of the plate with fixed-axis rotation and translational motion,respectively,are investigated.This paper presents a dynamic theory for calculating the deformation of 3D braided composite structures undergoing both translational and rotational motions.It also provides a simulation method for investigating the dynamic behavior of non-isotropic material plates in various applications.
基金supported by grants from the Human Resources Development program (Grant No.20204010600250)the Training Program of CCUS for the Green Growth (Grant No.20214000000500)by the Korea Institute of Energy Technology Evaluation and Planning (KETEP)funded by the Ministry of Trade,Industry,and Energy of the Korean Government (MOTIE).
文摘It is of great importance to obtain precise trace data,as traces are frequently the sole visible and measurable parameter in most outcrops.The manual recognition and detection of traces on high-resolution three-dimensional(3D)models are relatively straightforward but time-consuming.One potential solution to enhance this process is to use machine learning algorithms to detect the 3D traces.In this study,a unique pixel-wise texture mapper algorithm generates a dense point cloud representation of an outcrop with the precise resolution of the original textured 3D model.A virtual digital image rendering was then employed to capture virtual images of selected regions.This technique helps to overcome limitations caused by the surface morphology of the rock mass,such as restricted access,lighting conditions,and shading effects.After AI-powered trace detection on two-dimensional(2D)images,a 3D data structuring technique was applied to the selected trace pixels.In the 3D data structuring,the trace data were structured through 2D thinning,3D reprojection,clustering,segmentation,and segment linking.Finally,the linked segments were exported as 3D polylines,with each polyline in the output corresponding to a trace.The efficacy of the proposed method was assessed using a 3D model of a real-world case study,which was used to compare the results of artificial intelligence(AI)-aided and human intelligence trace detection.Rosette diagrams,which visualize the distribution of trace orientations,confirmed the high similarity between the automatically and manually generated trace maps.In conclusion,the proposed semi-automatic method was easy to use,fast,and accurate in detecting the dominant jointing system of the rock mass.
文摘Liposarcoma is one of the most common soft tissue sarcomas,however,its occurrence rate is still rare compared to other cancers.Due to its rarity,in vitro experiments are an essential approach to elucidate liposarcoma pathobiology.Conventional cell culture-based research(2D cell culture)is still playing a pivotal role,while several shortcomings have been recently under discussion.In vivo,mouse models are usually adopted for pre-clinical analyses with expectations to overcome the issues of 2D cell culture.However,they do not fully recapitulate human dedifferentiated liposarcoma(DDLPS)characteristics.Therefore,three-dimensional(3D)culture systems have been the recent research focus in the cell biology field with the expectation to overcome at the same time the disadvantages of 2D cell culture and in vivo animal models and fill in the gap between them.Given the liposarcoma rarity,we believe that 3D cell culture techniques,including 3D cell cultures/co-cultures,and Patient-Derived tumor Organoids(PDOs),represent a promising approach to facilitate liposarcoma investigation and elucidate its molecular mechanisms and effective therapy development.In this review,we first provide a general overview of 3D cell cultures compared to 2D cell cultures.We then focus on one of the recent 3D cell culture applications,Patient-Derived Organoids(PDOs),summarizing and discussing several PDO methodologies.Finally,we discuss the current and future applications of PDOs to sarcoma,particularly in the field of liposarcoma.
文摘Background:Traditional imaging approaches to keratoconus(KCN)have thus far failed to produce a standardized approach for diagnosis.While many diagnostic modalities and metrics exist,none have proven robust enough to be considered a gold standard.This study aims to introduce novel metrics to differentiate between KCN and healthy corneas using three-dimensional(3D)measurements of surface area and volume.Methods:This retrospective observational study examined KCN patients along with healthy control patients between the ages of 20 and 79 years old at the University of Maryland,Baltimore.The selected patients underwent a nine-line raster scan anterior segment optical coherence tomography(AS-OCT).ImageJ was used to determine the central 6 mm of each image and each corneal image was then divided into six 1 mm segments.Free-D software was then used to render the nine different images into a 3D model to calculate corneal surface area and volume.A two-tailed Mann-Whitney test was used to assess statistical significance when comparing these subsets.Results:Thirty-three eyes with KCN,along with 33 healthy control,were enrolled.There were statistically significant differences between the healthy and KCN groups in the metric of anterior corneal surface area(13.927 vs.13.991 mm^(2),P=0.046),posterior corneal surface area(14.045 vs.14.173 mm^(2),P<0.001),and volume(8.430 vs.7.773 mm3,P<0.001)within the central 6 mm.Conclusions:3D corneal models derived from AS-OCT can be used to measure anterior corneal surface area,posterior corneal surface area,and corneal volume.All three parameters are statistically different between corneas with KCN and healthy corneas.Further study and application of these parameters may yield new methodologies for the detection of KCN.
基金supported by a grant from the Research Grant Council of Hong Kong Special Administrative Region(Project No.11207724).
文摘The development of digital twins for geotechnical structures necessitates the real-time updates of threedimensional(3D)virtual models(e.g.numerical finite element method(FEM)model)to accurately predict time-varying geotechnical responses(e.g.consolidation settlement)in a 3D spatial domain.However,traditional 3D numerical model updating approaches are computationally prohibitive and therefore difficult to update the 3D responses in real time.To address these challenges,this study proposes a novel machine learning framework called sparse dictionary learning(T-3D-SDL)for real-time updating of time-varying 3D geotechnical responses.In T-3D-SDL,a concerned dataset(e.g.time-varying 3D settlement)is approximated as a linear superposition of dictionary atoms generated from 3D random FEM analyses.Field monitoring data are then used to identify non-trivial atoms and estimate their weights within a Bayesian framework for model updating and prediction.The proposed approach enables the real-time update of temporally varying settlements with a high 3D spatial resolution and quantified uncertainty as field monitoring data evolve.The proposed approach is illustrated using an embankment construction project.The results show that the proposed approach effectively improves settlement predictions along temporal and 3D spatial dimensions,with minimal latency(e.g.within minutes),as monitoring data appear.In addition,the proposed approach requires only a reasonably small number of 3D FEM model evaluations,avoids the use of widely adopted yet often criticized surrogate models,and effectively addresses the limitations(e.g.computational inefficiency)of existing 3D model updating approaches.
文摘A numerical investigation on the effectiveness of the actuator disc method in producing the interactions of multiple tidal stream devices via the 3D-RANS finite element model Telemac3D is explored. The methodology for the implementation of the source term to represent an array of 20 m rotor diameter turbines deployed in an idealized channel is reviewed and discussed in detail. Flow interactions between multiple turbines are investigated for a single row arrangement with only two turbines and a two row arrangement containing three turbines. The results demonstrate that the non-hydrostatic solver shows better agreement when validated against published experimental data. Notably,the mesh density at the device location can strongly influence the simulated thrust from the disc. Although the actuator disc model can generally replicate the wake interactions well, the results indicate that it cannot accurately characterize the flow for regions with high turbulences. While a model setup with the largest lateral spacing(1.5D) demonstrates excellent agreement with the experimental data, the 0.5D model(smallest gap) deviates by up to 25%. These findings demonstrate the effectiveness of the applied source term in reproducing the wake profile, which is comparable with the published data, and highlight the inherent nature of the RANS and actuator disc models.
基金funded by the project supported by the Heilongjiang Provincial Natural Science Foundation of China(Grant Number LH2022F030).
文摘3D model classification has emerged as a significant research focus in computer vision.However,traditional convolutional neural networks(CNNs)often struggle to capture global dependencies across both height and width dimensions simultaneously,leading to limited feature representation capabilities when handling complex visual tasks.To address this challenge,we propose a novel 3D model classification network named ViT-GE(Vision Transformer with Global and Efficient Attention),which integrates Global Grouped Coordinate Attention(GGCA)and Efficient Channel Attention(ECA)mechanisms.Specifically,the Vision Transformer(ViT)is employed to extract comprehensive global features from multi-view inputs using its self-attention mechanism,effectively capturing 3D shape characteristics.To further enhance spatial feature modeling,the GGCA module introduces a grouping strategy and global context interactions.Concurrently,the ECA module strengthens inter-channel information flow,enabling the network to adaptively emphasize key features and improve feature fusion.Finally,a voting mechanism is adopted to enhance classification accuracy,robustness,and stability.Experimental results on the ModelNet10 dataset demonstrate that our method achieves a classification accuracy of 93.50%,validating its effectiveness and superior performance.
基金the funding from the National Natural Science Foundation of China No.52275294the National Key Research and Development Program of China(No.2018YFA0703000)。
文摘Constructing an in vitro vascularized liver tissue model that closely simulates the human liver is crucial for promoting cell proliferation,mimicking physiological heterogeneous structures,and recreating the cellular microenvironment.However,the layer-by-layer printing method is significantly constrained by the rheological properties of the bioink,making it challenging to form complex three-dimensional vascular structures in low-viscosity soft materials.To overcome this limitation,we developed a cross-linkable biphasic embedding medium by mixing low-viscosity biomaterials with gelatin microgel.This medium possesses yield stress and self-healing properties,facilitating efficient and continuous three-dimensional shaping of sacrificial ink within it.By adjusting the printing speed,we controlled the filament diameter,achieving a range from 250μm to 1000μm,and ensuring precise control over ink deposition locations and filament shapes.Using the in situ endothelialization method,we constructed complex vascular structures and ensured close adhesion between hepatocytes and endothelial cells.In vitro experiments demonstrated that the vascularized liver tissue model exhibited enhanced protein synthesis and metabolic function compared to mixed liver tissue.We also investigated the impact of varying vascular densities on liver tissue function.Transcriptome sequencing revealed that liver tissues with higher vascular density exhibited upregulated gene expression in metabolic and angiogenesis-related pathways.In summary,this method is adaptable to various materials,allowing the rheological properties of the supporting bath and the tissue's porosity to be modified using microgels,thus enabling precise regulation of the liver tissue microenvironment.Additionally,it facilitates the rapid construction of three-dimensional vascular structures within liver tissue.The resulting vascularized liver tissue model exhibits enhanced biological functionality,opening new opportunities for biomedical applications.
基金Supported by National Natural Science Foundation of China(Grant No.U1934203)Research and Development Project of Science and Technology of China Railway Corporation(Grant No.P2023T002)。
文摘Typically,seat or floor acceleration is used to evaluate the ride comfort of a high-speed train.However,the dynamic performance of the human body significantly differs from that of the floor.Therefore,using the car body floor and seat accelerations to calculate the ride comfort index of a high-speed train may not reflect the true feelings of passengers.In this study,a 3D human-seat-vehicle-track coupling model was established to investigate the ride comfort of highspeed train passengers.The seated human model,which considers the longitudinal,lateral,vertical,pitching,yawing,and rolling motions,comprises the head,upper torso,lower torso,pelvis,thighs,and shanks.The model parameters were determined using multi-axis excitation measurement data based on a genetic algorithm.Subsequently,the applicability of the small-angle assumption and natural modes of the human model is analyzed.Using the coupling system model,the vibration characteristics of the human-seat interaction surface were analyzed.The ride comfort of the high-speed train and human body dynamic performance were analyzed under normal conditions,track geometric irregularities and train meeting conditions.The results showed that the passenger seats in the front and rear rows adjacent to the window had a higher acceleration value than the others.The human backrest and seat pad connection points have higher vibration amplitudes than the car body floor in the human-sensitive frequency range,indicating that using the acceleration values on the floor may underestimate the discomfort of passengers.The ride comfort of high-speed trains diminishes in the presence of track geometric irregularities and when trains pass each other.When the excitation frequency of track geometry irregularities approached the natural frequency of the human-seat-vehicle system,ride comfort in high-speed trains decreased significantly.Moreover,using seat acceleration to evaluate passenger ride comfort overlooks the vibration characteristics of the human body.The transient aerodynamic force generated when the train meets can cause a larger car body roll and lateral motion at 2 Hz,which,in turn,decreases the passenger ride comfort.This study presents a detailed human-seat-vehicle-track coupling system that can reflect a passenger’s dynamic performance under complex operating conditions.
基金This work has been supported by the National Natural Science Foundation of China under grant numbers 51590883 and 51331006by the State Key Project of Research and Development of China(No.2017YFA0206302).
文摘In this work,the computational complexity of a spin-glass three-dimensional(3D)Ising model(for the lattice sizeN=lmn,wherel,m,n are thenumbersof lattice points along three crystallographic directions)is studied.We prove that an absolute minimum core(AMC)model consisting of a spin-glass 2D Ising model interacting with its nearest neighboring plane,has its computational complexity O(2mn).Any algorithms to make the model smaller(or simpler)than the AMC model will cut the basic element of the spin-glass 3D Ising model and lost many important information of the original model.Therefore,the computational complexity of the spin-glass 3D Ising model cannot be reduced to be less than O(2mn)by any algorithms,which is in subexponential time,superpolynomial.
基金supported by Special Project of Scientific Research of Education Department of Shaanxi Provincial Government under Grant No.11JK0967
文摘Three-dimensional modeling of virtual hoisting machinery is the critical works to structure the system of virtual construction, and the foundation to realize intelligent and interactive virtual hoisting. Aimed at enhancing the requests of image quality and stability of the virtual construction scene, taking a tower crane for example. We studied the technology of three-dimensional modeling and optimization of a virtual tower crane, and a method named two-stage model optimization was put forward. This depended on the modeling stage using Solidworks and 3DS Max and the performance optimization stage in EON. The practice of software development indicates that the proposed methods of three-dimensional modeling and optimization could satisfy the performance request of virtual construction system and be popularized to other virtual system.
基金supported by the Natural Science Foundation of China(Nos.41404057,41674077 and 411640034)the Nuclear Energy Development Project of China,and the‘555’Project of Gan Po Excellent People
文摘To speed up three-dimensional （3D） DC resistivity modeling, we present a new multigrid method, the aggregation-based algebraic multigrid method （AGMG）. We first discretize the differential equation of the secondary potential field with mixed boundary conditions by using a seven-point finite-difference method to obtain a large sparse system of linear equations. Then, we introduce the theory behind the pairwise aggregation algorithms for AGMG and use the conjugate-gradient method with the V-cycle AGMG preconditioner （AGMG-CG） to solve the linear equations. We use typical geoelectrical models to test the proposed AGMG-CG method and compare the results with analytical solutions and the 3DDCXH algorithm for 3D DC modeling （3DDCXH）. In addition, we apply the AGMG-CG method to different grid sizes and geoelectrical models and compare it to different iterative methods, such as ILU-BICGSTAB, ILU-GCR, and SSOR-CG. The AGMG-CG method yields nearly linearly decreasing errors, whereas the number of iterations increases slowly with increasing grid size. The AGMG-CG method is precise and converges fast, and thus can improve the computational efficiency in forward modeling of three-dimensional DC resistivity.
基金supported by the National Natural Science Foundation of China(No.41474110)Shell Ph.D. Scholarship to support excellence in geophysical research
文摘Generally, FD coefficients can be obtained by using Taylor series expansion （TE） or optimization methods to minimize the dispersion error. However, the TE-based FD method only achieves high modeling precision over a limited range of wavenumbers, and produces large numerical dispersion beyond this range. The optimal FD scheme based on least squares （LS） can guarantee high precision over a larger range of wavenumbers and obtain the best optimization solution at small computational cost. We extend the LS-based optimal FD scheme from two-dimensional （2D） forward modeling to three-dimensional （3D） and develop a 3D acoustic optimal FD method with high efficiency, wide range of high accuracy and adaptability to parallel computing. Dispersion analysis and forward modeling demonstrate that the developed FD method suppresses numerical dispersion. Finally, we use the developed FD method to source wavefield extrapolation and receiver wavefield extrapolation in 3D RTM. To decrease the computation time and storage requirements, the 3D RTM is implemented by combining the efficient boundary storage with checkpointing strategies on GPU. 3D RTM imaging results suggest that the 3D optimal FD method has higher precision than conventional methods.
