The multi-pass intermittent local loading process,which features a more flexible processing path,can further enhance the second material distribution during local loading,improve the formability of components,and redu...The multi-pass intermittent local loading process,which features a more flexible processing path,can further enhance the second material distribution during local loading,improve the formability of components,and reduce forming loads.However,the absence of compatible forming equipment makes it difficult to control the constraint in the unloaded zones during the forming process.This difficulty complicates coordination and control of deformation,particularly for asymmetric rib-web components.Additionally,the current implementation involves multi-fire heating,a long process flow,and high energy consumption,which limits the popularization and application of the local loading process.In this study,a new multi-pass local loading hydraulic forming apparatus that can quickly and reliably switch between heavy-load deformation and low-load constraint for different local loading sub-dies was developed.A 10-tonne laboratory prototype was developed,and the forming characteristics during the forming process as well as the response characteristics of the hydraulic system during the multi-pass intermittent local loading of rib-web component were investigated using numerical simulations and physical experiments.Results indicated that,compared to a whole loading process with the same initial geometry of billet,the total forming load(i.e.,the sum of loaded and restrained loads)is reduced by more than 40%with the local loading process,and by nearly 50%with multi-pass local loading.The multi-pass local loading process allows for more effective control of material flow compared to single-pass local loading,leading to improved cavity filling and reduced flow line disturbance.For a large-scale,complex titanium alloy bulkhead,the cavity filling problem was addressed by optimizing the multi-pass local loading path with an unequal thickness billet.The dynamic performance of the multi-pass local loading hydraulic system was found to be robust,with stable pressure transitions during motion and load switching for the sub-die(s).The dynamic characteristic of the hydraulic cylinder when switching from non-moving/unloaded state to a moving/loading state are consistent whether a load is present or not.However,the dynamic characteristics differ when switching from a moving/loading state to non-moving/unloaded state,showing opposite behavior.The developed hydraulic drive mechanism provides a way for implementation of multi-pass local loading without auxiliary operation and extra heating.The results of the study provide a foundation for the industrial production of large-scale,complex components with reduced force requirement and low-energy consumption.展开更多
With the growing global demand for energy,deep underground salt caverns are emerging as a potential solution for large-scale energy storage.In this study,multistage cyclic loading tests were conducted on rock salt at ...With the growing global demand for energy,deep underground salt caverns are emerging as a potential solution for large-scale energy storage.In this study,multistage cyclic loading tests were conducted on rock salt at different temperatures in combination with real-time acoustic emission(AE)monitoring.The results show that the cumulative AE count increases stepwise with increasing cyclic stress.The peak frequency is concentrated primarily in the medium-frequency range,exhibiting a band distribution across low-,medium-,and high-frequency ranges.As the temperature increases,the proportion of low-frequency signals decreases from 14.32%to 5.76%,whereas the proportion of medium-frequency signals increases from 85.48%to 94.1%.The proportion of high-frequency signals remains relatively constant between 0.1%and 0.2%.The amplitude-count relationship of the AE signals demonstrates a strong negative power-law correlation.Furthermore,with increasing temperature,the negative power-law exponent of the amplitude gradually decreases,with the b value decreasing from 1.096 to 0.837 and the a value decreasing from 7.4871 to 6.6982.Under all four temperature conditions,the dominant failure mode in rock salt is tensile cracking.However,as the temperature increases,the proportion of tensile cracks decreases from 88.59%to 75.12%,whereas the proportion of shear cracks at 80℃is nearly double that at 20℃.This finding indicates that as the temperature increases,the ductility of the material increases,and the crack propagation mode shifts from tensile to shear.This research provides valuable insights for the design and stability assessment of salt cavern reservoirs for deep underground energy storage systems.展开更多
Large-scale geological energy storage plays a crucial role in balancing the intermittency of renewable energy.As an energy storage medium,soaked sandstone has a wide range of applications in geological energy storage....Large-scale geological energy storage plays a crucial role in balancing the intermittency of renewable energy.As an energy storage medium,soaked sandstone has a wide range of applications in geological energy storage.Understanding the damage characteristics in soaked sandstones is essential for ensuring the stability and longevity of these energy storage systems.This study involved multi-stage cyclic loading tests conducted on soaked sandstone to explore the damage evolution throughout the loading process.The findingsreveal several important insights:(1)The plastic hysteresis loops observed during multi-stage cyclic loading evolved from dense to sparse.An increase in stress level led to greater damage in the rock,as evidenced by an increase in accumulated peak/plastic strains.(2)Energy density and stress level are related by quadratic polynomial relationships.The elastic and dissipated energy densities are related by a linear law.The average energy storage coefficientdecreased by up to 24.1%with increasing stress amplitude,reflectingchanges in energy dynamics within the samples.(3)AE counts,amplitude,and frequency provided critical insights into rock damage and fracture patterns.The greater the loading rate and stress amplitude,the lower the proportion of high-amplitude,high-peak frequency,and shear-type fractures.Increasing stress amplitude caused a maximum 16.63%reduction in the AE bvalue,indicating shifts in fracture behavior under varying stress conditions.(4)The increase in loading rate and stress amplitude promotes the transformation of micropores and mesopores to macropores/microcracks.(5)Damage variables,definedin terms of cumulative dissipation energy,aligned closely with the fatigue damage model under multi-stage cyclic loading.Accelerated damage primarily occurred during the finalstages of fatigue loading,highlighting critical periods in the degradation of soaked sandstones.This study can offer guidance for designing operational parameters for energy storage geological bodies dominated by soaked sandstones.展开更多
This study investigates the performance of high-strength cable bolts under impact loading conditions representative of rock bursts in underground environments.Although widely used,the dynamic behaviour of these cable ...This study investigates the performance of high-strength cable bolts under impact loading conditions representative of rock bursts in underground environments.Although widely used,the dynamic behaviour of these cable bolts has received limited experimental attention,and their effectiveness in seismically active zones remains a subject of ongoing debate.To address this gap,a reverse pull-out test machine integrated with a drop hammer rig was employed.Tests were conducted on 70-t SUMO bulbed and non-bulbed cable bolts with encapsulation lengths of 300 and 450 mm,subjected to an impact energy of 14.52 k J.Results indicate that non-bulbed cables,despite showing lower initial peak loads(average 218 vs.328 k N for bulbed cables at 300 mm encapsulation),demonstrated superior energy absorption(average 11.26 vs.8.75 k J)and displacement capacity(average 48.40 vs.36.25 mm).Increasing the encapsulation length for bulbed cables led to a reduction in initial peak load but improved displacement and energy absorption.The dominant failure mechanism was debonding at the cable-grout interface,characterised by frictional sliding and cable rotation.These findings provide new insights into the energy dissipation mechanisms of cables and support the development of more resilient ground support systems for dynamically active conditions.展开更多
The growing demands on global infrastructure highlight the critical need for durable and efficient pavement systems,particularly under the stress of repetitive heavy traffic loads.The use of geosynthetics within the p...The growing demands on global infrastructure highlight the critical need for durable and efficient pavement systems,particularly under the stress of repetitive heavy traffic loads.The use of geosynthetics within the pavement structure increases the load-carrying capacity of unbound pavement layers by providing lateral restraint,improving vertical stress distribution,and enhancing bearing capacity.Such reinforcement typically aims to either improve the service life of pavements or achieve equivalent performance with a reduced granular cover.Previous and ongoing research quantifies geosynthetic performance in pavement reinforcement using various testing methods.Among these,laboratory model box tests subjected to cyclic loading are pivotal,as they closely replicate real-world traffic conditions.Hence,these studies are essential for understanding how geosynthetics distribute loads and enhance pavement durability.This facilitates the development of optimized geosynthetic design and installation practices,accelerating the loading process to simulate years of traffic wear in a shorter period.This review discusses the improved rutting resistance of unbound pavements reinforced with geosynthetic materials,specifically drawing on data from cyclic plate load tests conducted on laboratory model boxes,as highlighted in the literature.Key variables such as optimum geosynthetic placement,geosynthetic material properties,performance of different geosynthetic materials and the effects of aperture shape and size on rutting resistance are discussed.Furthermore,the review assesses various predictive rutting models,analysing their applicability and accuracy in forecasting the rutting performance of geosynthetic-reinforced unbound pavements.This comprehensive literature review aids pavement engineers and researchers,in guiding the selection and design of geosynthetics to optimize pavement durability and functionality under repetitive traffic loads.展开更多
The development of metallic mineral resources generates a significant amount of solid waste,such as tailings and waste rock.Cemented tailings and waste-rock backfill(CTWB)is an effective method for managing and dispos...The development of metallic mineral resources generates a significant amount of solid waste,such as tailings and waste rock.Cemented tailings and waste-rock backfill(CTWB)is an effective method for managing and disposing of this mining waste.This study employs a macro-meso-micro testing method to investigate the effects of the waste rock grading index(WGI)and loading rate(LR)on the uniaxial compressive strength(UCS),pore structure,and micromorphology of CTWB materials.Pore structures were analyzed using scanning electron microscopy(SEM)and mercury intrusion porosimetry(MIP).The particles(pores)and cracks analysis system(PCAS)software was used to quantitatively characterize the multi-scale micropores in the SEM images.The key findings indicate that the macroscopic results(UCS)of CTWB materials correspond to the microscopic results(pore structure and micromorphology).Changes in porosity largely depend on the conditions of waste rock grading index and loading rate.The inclusion of waste rock initially increases and then decreases the UCS,while porosity first decreases and then increases,with a critical waste rock grading index of 0.6.As the loading rate increases,UCS initially rises and then falls,while porosity gradually increases.Based on MIP and SEM results,at waste rock grading index 0.6,the most probable pore diameters,total pore area(TPA),pore number(PN),maximum pore area(MPA),and area probability distribution index(APDI)are minimized,while average pore form factor(APF)and fractal dimension of pore porosity distribution(FDPD)are maximized,indicating the most compact pore structure.At a loading rate of 12.0 mm/min,the most probable pore diameters,TPA,PN,MPA,APF,and APDI reach their maximum values,while FDPD reaches its minimum value.Finally,the mechanism of CTWB materials during compression is analyzed,based on the quantitative results of UCS and porosity.The research findings play a crucial role in ensuring the successful application of CTWB materials in deep metal mines.展开更多
With the maturation of coalbed methane(CBM)exploitation and the transition into the late stages of dewatering and gas production,liquid loading in gathering pipelines has emerged as a major constraint on productivity ...With the maturation of coalbed methane(CBM)exploitation and the transition into the late stages of dewatering and gas production,liquid loading in gathering pipelines has emerged as a major constraint on productivity and operational stability.Based on real-time field data and gas-liquid physicochemical analyses,this study elucidates the mechanisms governing liquid loading formation under varying temperature,pressure,and water saturation conditions.An HYSYS model is employed to determine the water dew point,while the Turner model is used to evaluate the critical conditions for liquid holdup.The results indicate that gas water saturation exerts the dominant influence on liquid loading risk,followed by pressure,whereas temperature plays a comparatively minor role.When water saturation exceeds 2%and the operating temperature falls below the dew point,condensation-driven liquid loading increases sharply.To further characterize the spatial distribution of liquid accumulation,a steady-state OLGA model of a DN100 gathering pipeline network is developed to examine the effects of pipe diameter,water saturation,and soil temperature.The simulations show that larger pipe diameters and higher water saturation significantly aggravate liquid holdup,while elevated soil temperature mitigates liquid accumulation.Moreover,the liquid holdup ratio is found to correlate closely with flow regime transitions,confirming its suitability as a key indicator of liquid loading risk.Based on these findings,optimization strategies for pipeline design and operation are proposed.To mitigate liquid loading,the gathering pipeline velocity should be maintained above the critical value of 1.63 m/s,and the gas water content should be strictly controlled below 2%.Under operating conditions representative of the Hancheng block,it is recommended to reduce the pipeline diameter from DN130 to DN100 to enhance self-cleaning capacity.In addition,thermal insulation should be applied during winter operation to maintain the pipe wall temperature above 10◦C,thereby suppressing condensation-induced liquid accumulation.展开更多
During deep coal mining,an instability failure of coal usually occurs under the combined effect of initial damage and triaxial cyclic loading and unloading(TCLU).Therefore,this study investigated the impact of initial...During deep coal mining,an instability failure of coal usually occurs under the combined effect of initial damage and triaxial cyclic loading and unloading(TCLU).Therefore,this study investigated the impact of initial damage on mechanical behavior and acoustic emission(AE)characteristics of coal under TCLU.Initial damage variables(IDVs)of coal specimens were quantified using preloading,followed by TCLU experiments to assess the deformation,energy distribution,and fracture development.The results revealed that the increase in IDVs significantly reduced the structural integrity of coal specimens,increased the cumulative irreversible strain,and enhanced the dissipated energy owing to microfracture expansion.Moreover,AE monitoring showed earlier activation of fractures and a higher occurrence of large-scale rupture events of coal specimens with high IDVs,which correlated with decreasing AE b values(reflecting the different scales of fracture within specimens)and increasing S values(reflecting the AE activity within specimens).Additionally,computed tomography analysis revealed intensified fracture networks and increasing three-dimensional fractal dimensions of coal specimens with higher IDVs.Finally,the coupling effect of TCLU and initial damage on the weakening mechanism of coal was investigated.Initial damage significantly reduced the structural integrity of coal by increasing the number of weak planes within coal specimens,contributing to the earlier activation and rapid expansion of fractures at low stress levels under TCLU and eventually accelerating the weakening process of coal.This study provides a scientific basis and theoretical support for the prevention and control of dynamic disasters in deep coal mining.展开更多
This paper presents two kinematic failure mechanisms of threc-dimensional rectangular footing resting on homogeneous undrained clay foundation under uniaxial vertical loading and uniaxial moment loading. The failure m...This paper presents two kinematic failure mechanisms of threc-dimensional rectangular footing resting on homogeneous undrained clay foundation under uniaxial vertical loading and uniaxial moment loading. The failure mechanism under vertical loading comprises a plane strain Prandti-type mechanism over the central part of the longer side, and the size of the mechanism gradually reduces at the ends of the longer side and over the shorter side as the corner of rectangular footing is being approached where the direction of soil motion remains normal to each corresponding side respectively. The failure mechanism under moment loading comprises a plane strain scoop sliding mechanism over the central part of the longer side, and the radius of scoop sliding mechanism increases linearly at the ends of the longer side. On the basis of the kinematic failure mechanisms mentioned above, the vertical ultimate bearing capacity and the ultimate bearing capacity against moment or moment ultimate bearing capacity are obtained by use of upper bound limit analysis theory. At the same time, numerical analysis results, Skempton＇ s results and Salgado et al. ＇s results are compared with this upper bound solution. It shows that the presented failure mechanisms and plastic limit analysis predictions are validated. In order to investigate the behaviors of undrained clay foundation beneath the rectangular footing subjected to the combined loadings, numerical analysis is adopted by virtue of the general-purpose FEM software ABAQUS, where the clay is assumed to obey the Mohr-Coulomb yielding criterion. The failure envelope and the ultimate bearing capacity are achieved by the numerical analysis results with the varying aspect ratios from length L to breadth B of the rectangular footing. The failure mechanisms of rectangular footing which are subjected to the combined vertical loading V and horizontal loading H （Vertical loading V and moment loading M, and horizontal loading H and moment loading M respectively are observed in the finite element analysis. ） is explained by use of the upper bound plasticity limit analysis theory. Finally, the reason of eccentricity of failure envelope in H-M loading space is given in this study, which can not be explained by use of the traditional ＇ swipe test＇.展开更多
The dynamic stress intensity factor of a three-dimensionalelliptic crack under impact loading is determined with the finiteelement method. The computation results can take into account theinfluence of time and the rat...The dynamic stress intensity factor of a three-dimensionalelliptic crack under impact loading is determined with the finiteelement method. The computation results can take into account theinfluence of time and the ratio of the wave speeds on the stressintensity factor. The present method is suitable not only forthree-dimensional dynamic crack, but also for three-dimensionaldynamic contact.展开更多
The dynamic stress intensity factor history for a half plane crack in an otherwise unbounded elastic body, with the crack faces subjected to a traction distribution consisting of two pairs of suddenly-applied shear li...The dynamic stress intensity factor history for a half plane crack in an otherwise unbounded elastic body, with the crack faces subjected to a traction distribution consisting of two pairs of suddenly-applied shear line loads is consid- ered. The analytic expression for the combined mode stress intensity factors as a function of time is obtained. The method of solution is based on the application of integral transforms and the Wiener-Hopf technique. Some features of the solutions are discussed and graphical numerical results are presented.展开更多
This paper presents a bi-level hybrid local search(BHLS)algorithm for the three-dimensional loading problem with balancing constraints(3DLP-B),where several rectangular boxes with even densities but different sizes ar...This paper presents a bi-level hybrid local search(BHLS)algorithm for the three-dimensional loading problem with balancing constraints(3DLP-B),where several rectangular boxes with even densities but different sizes are loaded into a single cubic bin to meet the requirements of the space or capacity utilization and the balance of the center of gravity.The proposed algorithm hybridizes a novel framed-layout procedure in which the concept of the core block and its generation strategy are introduced.Once the block-loading sequence has been determined,we can load one block at a time by the designed construction heuristic.Then,the double-search is introduced;its external search procedure generates a list of compact packing patterns while its internal search procedure is used to search the core-block frames and their best distribution locations.The approach is extensively tested on weakly to strongly heterogeneous benchmark data.The results show that it has better performance in improving space utilization rate and balanced condition of the placement than existed techniques:the overall averages from 79.85%to 86.45%were obtained for the balanced cases and relatively high space-usage rate of 89.44%was achieved for the unbalanced ones.展开更多
A frequency domain analysis method based on the three-dimensional translating-pulsating （3DTP） source Green function is developed to investigate wave loads and free motions of two ships advancing on parallel course ...A frequency domain analysis method based on the three-dimensional translating-pulsating （3DTP） source Green function is developed to investigate wave loads and free motions of two ships advancing on parallel course in waves. Two experiments are carried out respectively to mea- sure the wave loads and the free motions for a pair of side-by- side arranged ship models advancing with an identical speed in head regular waves. For comparison, each model is also tested alone. Predictions obtained by the present solution are found in favorable agreement with the model tests and are more accurate than the traditional method based on the three dimensional pulsating （3DP） source Green function. Numer- ical resonances and peak shift can be found in the 3DP pre- dictions, which result from the wave energy trapped in the gap between two ships and the extremely inhomogeneous wave load distribution on each hull. However, they can be eliminated by 3DTP, in which the speed affects the free sur- face and most of the wave energy can be escaped from the gap. Both the experiment and the present prediction show that hydrodynamic interaction effects on wave loads and free motions are significant. The present solver may serve as a validated tool to predict wave loads and motions of two ves- sels under replenishment at sea, and may help to evaluate the hydrodynamic interaction effects on the ships safety in replenishment operation.展开更多
The environment of low-altitude urban airspace is complex and variable due to numerous obstacles,non-cooperative aircraft,and birds.Unmanned Aerial Vehicles(UAVs)leveraging environmental information to achieve three-d...The environment of low-altitude urban airspace is complex and variable due to numerous obstacles,non-cooperative aircraft,and birds.Unmanned Aerial Vehicles(UAVs)leveraging environmental information to achieve three-dimension collision-free trajectory planning is the prerequisite to ensure airspace security.However,the timely information of surrounding situation is difficult to acquire by UAVs,which further brings security risks.As a mature technology leveraged in traditional civil aviation,the Automatic Dependent Surveillance-Broadcast(ADS-B)realizes continuous surveillance of the information of aircraft.Consequently,we leverage ADS-B for surveillance and information broadcasting,and divide the aerial airspace into multiple sub-airspaces to improve flight safety in UAV trajectory planning.In detail,we propose the secure Sub-airSpaces Planning(SSP)algorithm and Particle Swarm Optimization Rapidly-exploring Random Trees(PSO-RRT)algorithm for the UAV trajectory planning in law-altitude airspace.The performance of the proposed algorithm is verified by simulations and the results show that SSP reduces both the maximum number of UAVs in the sub-airspace and the length of the trajectory,and PSO-RRT reduces the cost of UAV trajectory in the sub-airspace.展开更多
Damage indices are effective in quantifying structural seismic damage.Numerous response-based damage indices have been developed and validated through the hysteretic response of various experimental specimens.However,...Damage indices are effective in quantifying structural seismic damage.Numerous response-based damage indices have been developed and validated through the hysteretic response of various experimental specimens.However,the accuracy of these indices for evaluating damage of RC columns is challenged by fluctuating axial load and irregular horizontal loading paths from 3-D earthquake excitations.This study introduces D_(iem),a material-based damage model for RC columns under random bidirectional loads and variable axial forces.Section damage indices of the plastic hinge are calculated by integrating the damage indices of concrete and steel fiber elements,considering their distance to the centroid axis.The P-Δeffect index is defined,and the component failure index is calculated using a combination of these indices.A hysteretic simulation and D_(iem)damage analysis program for cantilever RC columns is developed using Fortran.Three RC columns tested under bidirectional hysteretic loading are simulated to calibrate the program.Parameter analysis of 1,638 RC columns is conducted to verify D_(iem)’s applicability.The results demonstrated that D_(iem)’s failure assessment aligns with the 80%residual criterion.D_(iem)analysis of a real seismic damaged RC column shows satisfactory agreement with post-earthquake damage assessment and illustrates significant damage differences between columns with and without axial load fluctuation.展开更多
The three-dimensional response of buried steel pipes under vehicle loads is investigated using the finite element analysis. The analysis is conducted using the finite element program ABAQUS. The effects of the vehicle...The three-dimensional response of buried steel pipes under vehicle loads is investigated using the finite element analysis. The analysis is conducted using the finite element program ABAQUS. The effects of the vehicle parameters, pipeline parameters and soil parameters on the response of the buried pipeline were discussed. The results indicate that the maximum principal stresses in a buried pipe under vehicle loads are significant for burial depths of less than 1 m. The maximum principal stresses of the buried pipeline decrease as the burial depth, vehicle velocity and surrounding soil’s elasticity modulus increase. For small burial depths, the stresses in buried pipes caused by vehicle motion in the direction normal to the pipe axis are more critical. However, the effects of motion direction are insignificant when the burial depth and the surrounding soil’s elasticity modulus increase. As the diameter of a buried pipe decreases, the maximum principal stresses increase.展开更多
In rock drilling and blasting,the misfire of electronic detonators will not only affect the rock fragmentation result but also bring serious potential safety hazards to engineering construction.An accurate and compreh...In rock drilling and blasting,the misfire of electronic detonators will not only affect the rock fragmentation result but also bring serious potential safety hazards to engineering construction.An accurate and comprehensive understanding of the failure mechanisms of electronic detonators subjected to impact loading is of great significance to the reliability design and field safety use of electronic detonators.The spatial distribution characteristics and failure modes of misfired electronic detonators under different application scenarios are statistically analysed.The results show that under high impact loads,electronic detonators will experience failure phenomena such as rupture of the fuse head,fracture of the bridge wire,falling off of the solder joint,chip module damage and insufficient initiation energy after deformation.The lack of impact resistance is the primary cause of misfire of electronic detonators.Combined with the underwater impact resistance test and the impact load test in the adjacent blasthole on site,the formulas of the impact failure probability of the electronic detonator under different stress‒strength distribution curves are deduced.The test and evaluation method of the impact resistance of electronic detonators based on stress‒strength interference theory is proposed.Furthermore,the impact failure model of electronic detonators considering the strength degradation effect under repeated random loads is established.On this basis,the failure mechanism of electronic detonators under different application environments,such as open-pit blasting and underground blasting,is revealed,which provides scientific theory and methods for the reliability analysis,design and type selection of electronic detonators in rock drilling and blasting.展开更多
A conceptual model of intermittent joints is introduced to the cyclic shear test in the laboratory to explore the effects of loading parameters on its shear behavior under cyclic shear loading.The results show that th...A conceptual model of intermittent joints is introduced to the cyclic shear test in the laboratory to explore the effects of loading parameters on its shear behavior under cyclic shear loading.The results show that the loading parameters(initial normal stress,normal stiffness,and shear velocity)determine propagation paths of the wing and secondary cracks in rock bridges during the initial shear cycle,creating different morphologies of macroscopic step-path rupture surfaces and asperities on them.The differences in stress state and rupture surface induce different cyclic shear responses.It shows that high initial normal stress accelerates asperity degradation,raises shear resistance,and promotes compression of intermittent joints.In addition,high normal stiffness provides higher normal stress and shear resistance during the initial cycles and inhibits the dilation and compression of intermittent joints.High shear velocity results in a higher shear resistance,greater dilation,and greater compression.Finally,shear strength is most sensitive to initial normal stress,followed by shear velocity and normal stiffness.Moreover,average dilation angle is most sensitive to initial normal stress,followed by normal stiffness and shear velocity.During the shear cycles,frictional coefficient is affected by asperity degradation,backfilling of rock debris,and frictional area,exhibiting a non-monotonic behavior.展开更多
Non-seismically designed(NSD)beam-column joints are susceptible to joint shear failure under seismic loads.Although significant research is available on the seismic behavior of such joints of planar frames,the informa...Non-seismically designed(NSD)beam-column joints are susceptible to joint shear failure under seismic loads.Although significant research is available on the seismic behavior of such joints of planar frames,the information on the seismic behavior of joints of space frames(3D joints)is insufficient.The 3D joints are subjected to bi-directional excitation,which results in an interaction between the shear strength obtained for the joint in the two orthogonal directions separately.The bi-directional seismic behavior of corner reinforced concrete(RC)joints is the focus of this study.First,a detailed finite element(FE)model using the FE software Abaqus,is developed and validated using the test results from the literature.The validated modeling procedure is used to conduct a parametric study to investigate the influence of different parameters such as concrete strength,dimensions of main and transverse beams framing into the joint,presence or absence of a slab,axial load ratio and loading direction on the seismic behavior of joints.By subjecting the models to different combinations of loads on the beams along perpendicular directions,the interaction of the joint shear strength in two orthogonal directions is studied.The comparison of the interaction curves of the joints obtained from the numerical study with a quadratic(circular)interaction curve indicates that in a majority of cases,the quadratic interaction model can represent the strength interaction diagrams of RC beam to column connections with governing joint shear failure reasonably well.展开更多
It is important to analyze the damage evolution process of surrounding rock under different water content for the stability of engineering rock mass.Based on digital speckle correlation(DSCM),acoustic emission(AE)and ...It is important to analyze the damage evolution process of surrounding rock under different water content for the stability of engineering rock mass.Based on digital speckle correlation(DSCM),acoustic emission(AE)and electromagnetic radiation(EMR),uniaxial hierarchical cyclic loading and unloading tests were carried out on sandstones with different fracture numbers under dry,natural and saturated water content,to explore the fracture propagation,failure precursor characteristics and damage response mechanism under the influence of water content effect.The results show that with the increase of water content,the peak stress and crack initiation stress decrease gradually,and the decreases are 15.28%-21.11%and 17.64%-23.04%,respectively.The peak strain and crack initiation strain increase gradually,and the increases are 19.85%-44.53%and 19.15%-41.94%,respectively.The precracked rock with different water content is mainly characterized by tensile failure at different loading stages.However,with the increase of water content,the proportion of shear cracks gradually increases,while acoustic emission events gradually decrease,the dissipative energy and energy storage limits of the rock under peak load gradually decrease,and the charge signal increases significantly,which is because the lubrication effect of water reduces the friction coefficient between crack surfaces.展开更多
基金the supports of the National Natural Science Foundation of China(Grant No.52375378)。
文摘The multi-pass intermittent local loading process,which features a more flexible processing path,can further enhance the second material distribution during local loading,improve the formability of components,and reduce forming loads.However,the absence of compatible forming equipment makes it difficult to control the constraint in the unloaded zones during the forming process.This difficulty complicates coordination and control of deformation,particularly for asymmetric rib-web components.Additionally,the current implementation involves multi-fire heating,a long process flow,and high energy consumption,which limits the popularization and application of the local loading process.In this study,a new multi-pass local loading hydraulic forming apparatus that can quickly and reliably switch between heavy-load deformation and low-load constraint for different local loading sub-dies was developed.A 10-tonne laboratory prototype was developed,and the forming characteristics during the forming process as well as the response characteristics of the hydraulic system during the multi-pass intermittent local loading of rib-web component were investigated using numerical simulations and physical experiments.Results indicated that,compared to a whole loading process with the same initial geometry of billet,the total forming load(i.e.,the sum of loaded and restrained loads)is reduced by more than 40%with the local loading process,and by nearly 50%with multi-pass local loading.The multi-pass local loading process allows for more effective control of material flow compared to single-pass local loading,leading to improved cavity filling and reduced flow line disturbance.For a large-scale,complex titanium alloy bulkhead,the cavity filling problem was addressed by optimizing the multi-pass local loading path with an unequal thickness billet.The dynamic performance of the multi-pass local loading hydraulic system was found to be robust,with stable pressure transitions during motion and load switching for the sub-die(s).The dynamic characteristic of the hydraulic cylinder when switching from non-moving/unloaded state to a moving/loading state are consistent whether a load is present or not.However,the dynamic characteristics differ when switching from a moving/loading state to non-moving/unloaded state,showing opposite behavior.The developed hydraulic drive mechanism provides a way for implementation of multi-pass local loading without auxiliary operation and extra heating.The results of the study provide a foundation for the industrial production of large-scale,complex components with reduced force requirement and low-energy consumption.
基金supported by the Major Research Development Program of Hubei Province,China(Grant Nos.2022BAA093 and 2022BAD163)the Open Research Fund of the State Key Laboratory of Geomechanics and Geotechnical Engineering,Institute of Rock and Soil Mechanics,Chinese Academy of Sciences(Grant No.SKLGME023008).
文摘With the growing global demand for energy,deep underground salt caverns are emerging as a potential solution for large-scale energy storage.In this study,multistage cyclic loading tests were conducted on rock salt at different temperatures in combination with real-time acoustic emission(AE)monitoring.The results show that the cumulative AE count increases stepwise with increasing cyclic stress.The peak frequency is concentrated primarily in the medium-frequency range,exhibiting a band distribution across low-,medium-,and high-frequency ranges.As the temperature increases,the proportion of low-frequency signals decreases from 14.32%to 5.76%,whereas the proportion of medium-frequency signals increases from 85.48%to 94.1%.The proportion of high-frequency signals remains relatively constant between 0.1%and 0.2%.The amplitude-count relationship of the AE signals demonstrates a strong negative power-law correlation.Furthermore,with increasing temperature,the negative power-law exponent of the amplitude gradually decreases,with the b value decreasing from 1.096 to 0.837 and the a value decreasing from 7.4871 to 6.6982.Under all four temperature conditions,the dominant failure mode in rock salt is tensile cracking.However,as the temperature increases,the proportion of tensile cracks decreases from 88.59%to 75.12%,whereas the proportion of shear cracks at 80℃is nearly double that at 20℃.This finding indicates that as the temperature increases,the ductility of the material increases,and the crack propagation mode shifts from tensile to shear.This research provides valuable insights for the design and stability assessment of salt cavern reservoirs for deep underground energy storage systems.
基金sponsored by National Natural Science Foundation of China(Grant Nos.U22B6003 and 52304070)Key Laboratory of Geomechanics and Geotechnical Engineering Safety,Chinese Academy of Sciences(Grant No.SKLGME-JBGS2404).
文摘Large-scale geological energy storage plays a crucial role in balancing the intermittency of renewable energy.As an energy storage medium,soaked sandstone has a wide range of applications in geological energy storage.Understanding the damage characteristics in soaked sandstones is essential for ensuring the stability and longevity of these energy storage systems.This study involved multi-stage cyclic loading tests conducted on soaked sandstone to explore the damage evolution throughout the loading process.The findingsreveal several important insights:(1)The plastic hysteresis loops observed during multi-stage cyclic loading evolved from dense to sparse.An increase in stress level led to greater damage in the rock,as evidenced by an increase in accumulated peak/plastic strains.(2)Energy density and stress level are related by quadratic polynomial relationships.The elastic and dissipated energy densities are related by a linear law.The average energy storage coefficientdecreased by up to 24.1%with increasing stress amplitude,reflectingchanges in energy dynamics within the samples.(3)AE counts,amplitude,and frequency provided critical insights into rock damage and fracture patterns.The greater the loading rate and stress amplitude,the lower the proportion of high-amplitude,high-peak frequency,and shear-type fractures.Increasing stress amplitude caused a maximum 16.63%reduction in the AE bvalue,indicating shifts in fracture behavior under varying stress conditions.(4)The increase in loading rate and stress amplitude promotes the transformation of micropores and mesopores to macropores/microcracks.(5)Damage variables,definedin terms of cumulative dissipation energy,aligned closely with the fatigue damage model under multi-stage cyclic loading.Accelerated damage primarily occurred during the finalstages of fatigue loading,highlighting critical periods in the degradation of soaked sandstones.This study can offer guidance for designing operational parameters for energy storage geological bodies dominated by soaked sandstones.
文摘This study investigates the performance of high-strength cable bolts under impact loading conditions representative of rock bursts in underground environments.Although widely used,the dynamic behaviour of these cable bolts has received limited experimental attention,and their effectiveness in seismically active zones remains a subject of ongoing debate.To address this gap,a reverse pull-out test machine integrated with a drop hammer rig was employed.Tests were conducted on 70-t SUMO bulbed and non-bulbed cable bolts with encapsulation lengths of 300 and 450 mm,subjected to an impact energy of 14.52 k J.Results indicate that non-bulbed cables,despite showing lower initial peak loads(average 218 vs.328 k N for bulbed cables at 300 mm encapsulation),demonstrated superior energy absorption(average 11.26 vs.8.75 k J)and displacement capacity(average 48.40 vs.36.25 mm).Increasing the encapsulation length for bulbed cables led to a reduction in initial peak load but improved displacement and energy absorption.The dominant failure mechanism was debonding at the cable-grout interface,characterised by frictional sliding and cable rotation.These findings provide new insights into the energy dissipation mechanisms of cables and support the development of more resilient ground support systems for dynamically active conditions.
基金financial and intellectual support provided by Queensland University of Technology(QUT)through its Higher Degree Research Program.
文摘The growing demands on global infrastructure highlight the critical need for durable and efficient pavement systems,particularly under the stress of repetitive heavy traffic loads.The use of geosynthetics within the pavement structure increases the load-carrying capacity of unbound pavement layers by providing lateral restraint,improving vertical stress distribution,and enhancing bearing capacity.Such reinforcement typically aims to either improve the service life of pavements or achieve equivalent performance with a reduced granular cover.Previous and ongoing research quantifies geosynthetic performance in pavement reinforcement using various testing methods.Among these,laboratory model box tests subjected to cyclic loading are pivotal,as they closely replicate real-world traffic conditions.Hence,these studies are essential for understanding how geosynthetics distribute loads and enhance pavement durability.This facilitates the development of optimized geosynthetic design and installation practices,accelerating the loading process to simulate years of traffic wear in a shorter period.This review discusses the improved rutting resistance of unbound pavements reinforced with geosynthetic materials,specifically drawing on data from cyclic plate load tests conducted on laboratory model boxes,as highlighted in the literature.Key variables such as optimum geosynthetic placement,geosynthetic material properties,performance of different geosynthetic materials and the effects of aperture shape and size on rutting resistance are discussed.Furthermore,the review assesses various predictive rutting models,analysing their applicability and accuracy in forecasting the rutting performance of geosynthetic-reinforced unbound pavements.This comprehensive literature review aids pavement engineers and researchers,in guiding the selection and design of geosynthetics to optimize pavement durability and functionality under repetitive traffic loads.
基金Project(2022YFC2904103)supported by the National Key Research and Development Program of ChinaProjects(52374112,52274108)supported by the National Natural Science Foundation of China+1 种基金Projects(BX20220036,BX20230041)supported by the Postdoctoral Innovation Talents Support Program,ChinaProject(2232080)supported by the Beijing Natural Science Foundation,China。
文摘The development of metallic mineral resources generates a significant amount of solid waste,such as tailings and waste rock.Cemented tailings and waste-rock backfill(CTWB)is an effective method for managing and disposing of this mining waste.This study employs a macro-meso-micro testing method to investigate the effects of the waste rock grading index(WGI)and loading rate(LR)on the uniaxial compressive strength(UCS),pore structure,and micromorphology of CTWB materials.Pore structures were analyzed using scanning electron microscopy(SEM)and mercury intrusion porosimetry(MIP).The particles(pores)and cracks analysis system(PCAS)software was used to quantitatively characterize the multi-scale micropores in the SEM images.The key findings indicate that the macroscopic results(UCS)of CTWB materials correspond to the microscopic results(pore structure and micromorphology).Changes in porosity largely depend on the conditions of waste rock grading index and loading rate.The inclusion of waste rock initially increases and then decreases the UCS,while porosity first decreases and then increases,with a critical waste rock grading index of 0.6.As the loading rate increases,UCS initially rises and then falls,while porosity gradually increases.Based on MIP and SEM results,at waste rock grading index 0.6,the most probable pore diameters,total pore area(TPA),pore number(PN),maximum pore area(MPA),and area probability distribution index(APDI)are minimized,while average pore form factor(APF)and fractal dimension of pore porosity distribution(FDPD)are maximized,indicating the most compact pore structure.At a loading rate of 12.0 mm/min,the most probable pore diameters,TPA,PN,MPA,APF,and APDI reach their maximum values,while FDPD reaches its minimum value.Finally,the mechanism of CTWB materials during compression is analyzed,based on the quantitative results of UCS and porosity.The research findings play a crucial role in ensuring the successful application of CTWB materials in deep metal mines.
基金supported by PetroChina Coalbed Methane Co.,Ltd.
文摘With the maturation of coalbed methane(CBM)exploitation and the transition into the late stages of dewatering and gas production,liquid loading in gathering pipelines has emerged as a major constraint on productivity and operational stability.Based on real-time field data and gas-liquid physicochemical analyses,this study elucidates the mechanisms governing liquid loading formation under varying temperature,pressure,and water saturation conditions.An HYSYS model is employed to determine the water dew point,while the Turner model is used to evaluate the critical conditions for liquid holdup.The results indicate that gas water saturation exerts the dominant influence on liquid loading risk,followed by pressure,whereas temperature plays a comparatively minor role.When water saturation exceeds 2%and the operating temperature falls below the dew point,condensation-driven liquid loading increases sharply.To further characterize the spatial distribution of liquid accumulation,a steady-state OLGA model of a DN100 gathering pipeline network is developed to examine the effects of pipe diameter,water saturation,and soil temperature.The simulations show that larger pipe diameters and higher water saturation significantly aggravate liquid holdup,while elevated soil temperature mitigates liquid accumulation.Moreover,the liquid holdup ratio is found to correlate closely with flow regime transitions,confirming its suitability as a key indicator of liquid loading risk.Based on these findings,optimization strategies for pipeline design and operation are proposed.To mitigate liquid loading,the gathering pipeline velocity should be maintained above the critical value of 1.63 m/s,and the gas water content should be strictly controlled below 2%.Under operating conditions representative of the Hancheng block,it is recommended to reduce the pipeline diameter from DN130 to DN100 to enhance self-cleaning capacity.In addition,thermal insulation should be applied during winter operation to maintain the pipe wall temperature above 10◦C,thereby suppressing condensation-induced liquid accumulation.
基金supported by the National Key R&D Program of China(Grant No.2022YFC3004704)the National Natural Science Foundation of China(Grant No.52174166)Graduate Research and Innovation Foundation of Chongqing,China(Grant No.CYB23031),which were gratefully acknowledged.
文摘During deep coal mining,an instability failure of coal usually occurs under the combined effect of initial damage and triaxial cyclic loading and unloading(TCLU).Therefore,this study investigated the impact of initial damage on mechanical behavior and acoustic emission(AE)characteristics of coal under TCLU.Initial damage variables(IDVs)of coal specimens were quantified using preloading,followed by TCLU experiments to assess the deformation,energy distribution,and fracture development.The results revealed that the increase in IDVs significantly reduced the structural integrity of coal specimens,increased the cumulative irreversible strain,and enhanced the dissipated energy owing to microfracture expansion.Moreover,AE monitoring showed earlier activation of fractures and a higher occurrence of large-scale rupture events of coal specimens with high IDVs,which correlated with decreasing AE b values(reflecting the different scales of fracture within specimens)and increasing S values(reflecting the AE activity within specimens).Additionally,computed tomography analysis revealed intensified fracture networks and increasing three-dimensional fractal dimensions of coal specimens with higher IDVs.Finally,the coupling effect of TCLU and initial damage on the weakening mechanism of coal was investigated.Initial damage significantly reduced the structural integrity of coal by increasing the number of weak planes within coal specimens,contributing to the earlier activation and rapid expansion of fractures at low stress levels under TCLU and eventually accelerating the weakening process of coal.This study provides a scientific basis and theoretical support for the prevention and control of dynamic disasters in deep coal mining.
基金This project is financially supported by the National Natural Science Foundation of China(Grant Nos.50639010,50579006 and 50179006)
文摘This paper presents two kinematic failure mechanisms of threc-dimensional rectangular footing resting on homogeneous undrained clay foundation under uniaxial vertical loading and uniaxial moment loading. The failure mechanism under vertical loading comprises a plane strain Prandti-type mechanism over the central part of the longer side, and the size of the mechanism gradually reduces at the ends of the longer side and over the shorter side as the corner of rectangular footing is being approached where the direction of soil motion remains normal to each corresponding side respectively. The failure mechanism under moment loading comprises a plane strain scoop sliding mechanism over the central part of the longer side, and the radius of scoop sliding mechanism increases linearly at the ends of the longer side. On the basis of the kinematic failure mechanisms mentioned above, the vertical ultimate bearing capacity and the ultimate bearing capacity against moment or moment ultimate bearing capacity are obtained by use of upper bound limit analysis theory. At the same time, numerical analysis results, Skempton＇ s results and Salgado et al. ＇s results are compared with this upper bound solution. It shows that the presented failure mechanisms and plastic limit analysis predictions are validated. In order to investigate the behaviors of undrained clay foundation beneath the rectangular footing subjected to the combined loadings, numerical analysis is adopted by virtue of the general-purpose FEM software ABAQUS, where the clay is assumed to obey the Mohr-Coulomb yielding criterion. The failure envelope and the ultimate bearing capacity are achieved by the numerical analysis results with the varying aspect ratios from length L to breadth B of the rectangular footing. The failure mechanisms of rectangular footing which are subjected to the combined vertical loading V and horizontal loading H （Vertical loading V and moment loading M, and horizontal loading H and moment loading M respectively are observed in the finite element analysis. ） is explained by use of the upper bound plasticity limit analysis theory. Finally, the reason of eccentricity of failure envelope in H-M loading space is given in this study, which can not be explained by use of the traditional ＇ swipe test＇.
基金the National Natural Science Foundation of China( No.K19672007)
文摘The dynamic stress intensity factor of a three-dimensionalelliptic crack under impact loading is determined with the finiteelement method. The computation results can take into account theinfluence of time and the ratio of the wave speeds on the stressintensity factor. The present method is suitable not only forthree-dimensional dynamic crack, but also for three-dimensionaldynamic contact.
基金The project supported by the National Natural Science Foundation of China
文摘The dynamic stress intensity factor history for a half plane crack in an otherwise unbounded elastic body, with the crack faces subjected to a traction distribution consisting of two pairs of suddenly-applied shear line loads is consid- ered. The analytic expression for the combined mode stress intensity factors as a function of time is obtained. The method of solution is based on the application of integral transforms and the Wiener-Hopf technique. Some features of the solutions are discussed and graphical numerical results are presented.
基金Project(16B134)supported by Hunan Provincial Department of Education,China
文摘This paper presents a bi-level hybrid local search(BHLS)algorithm for the three-dimensional loading problem with balancing constraints(3DLP-B),where several rectangular boxes with even densities but different sizes are loaded into a single cubic bin to meet the requirements of the space or capacity utilization and the balance of the center of gravity.The proposed algorithm hybridizes a novel framed-layout procedure in which the concept of the core block and its generation strategy are introduced.Once the block-loading sequence has been determined,we can load one block at a time by the designed construction heuristic.Then,the double-search is introduced;its external search procedure generates a list of compact packing patterns while its internal search procedure is used to search the core-block frames and their best distribution locations.The approach is extensively tested on weakly to strongly heterogeneous benchmark data.The results show that it has better performance in improving space utilization rate and balanced condition of the placement than existed techniques:the overall averages from 79.85%to 86.45%were obtained for the balanced cases and relatively high space-usage rate of 89.44%was achieved for the unbalanced ones.
基金supported by the National Natural Science Foundation of China(50879090)the Key Research Program of Hydrodynamics of China(9140A14030712JB11044)
文摘A frequency domain analysis method based on the three-dimensional translating-pulsating （3DTP） source Green function is developed to investigate wave loads and free motions of two ships advancing on parallel course in waves. Two experiments are carried out respectively to mea- sure the wave loads and the free motions for a pair of side-by- side arranged ship models advancing with an identical speed in head regular waves. For comparison, each model is also tested alone. Predictions obtained by the present solution are found in favorable agreement with the model tests and are more accurate than the traditional method based on the three dimensional pulsating （3DP） source Green function. Numer- ical resonances and peak shift can be found in the 3DP pre- dictions, which result from the wave energy trapped in the gap between two ships and the extremely inhomogeneous wave load distribution on each hull. However, they can be eliminated by 3DTP, in which the speed affects the free sur- face and most of the wave energy can be escaped from the gap. Both the experiment and the present prediction show that hydrodynamic interaction effects on wave loads and free motions are significant. The present solver may serve as a validated tool to predict wave loads and motions of two ves- sels under replenishment at sea, and may help to evaluate the hydrodynamic interaction effects on the ships safety in replenishment operation.
基金supported by the National Key R&D Program of China(No.2022YFB3104502)the National Natural Science Foundation of China(No.62301251)+2 种基金the Natural Science Foundation of Jiangsu Province of China under Project(No.BK20220883)the open research fund of National Mobile Communications Research Laboratory,Southeast University,China(No.2024D04)the Young Elite Scientists Sponsorship Program by CAST(No.2023QNRC001).
文摘The environment of low-altitude urban airspace is complex and variable due to numerous obstacles,non-cooperative aircraft,and birds.Unmanned Aerial Vehicles(UAVs)leveraging environmental information to achieve three-dimension collision-free trajectory planning is the prerequisite to ensure airspace security.However,the timely information of surrounding situation is difficult to acquire by UAVs,which further brings security risks.As a mature technology leveraged in traditional civil aviation,the Automatic Dependent Surveillance-Broadcast(ADS-B)realizes continuous surveillance of the information of aircraft.Consequently,we leverage ADS-B for surveillance and information broadcasting,and divide the aerial airspace into multiple sub-airspaces to improve flight safety in UAV trajectory planning.In detail,we propose the secure Sub-airSpaces Planning(SSP)algorithm and Particle Swarm Optimization Rapidly-exploring Random Trees(PSO-RRT)algorithm for the UAV trajectory planning in law-altitude airspace.The performance of the proposed algorithm is verified by simulations and the results show that SSP reduces both the maximum number of UAVs in the sub-airspace and the length of the trajectory,and PSO-RRT reduces the cost of UAV trajectory in the sub-airspace.
基金Scientific Research Fund of Institute of Engineering Mechanics,China Earthquake Administration under Grant No.2019B12National Natural Science Foundation of China Youth Fund under Grant No.51108433National Natural Science Foundation of China under Grant No.51778186。
文摘Damage indices are effective in quantifying structural seismic damage.Numerous response-based damage indices have been developed and validated through the hysteretic response of various experimental specimens.However,the accuracy of these indices for evaluating damage of RC columns is challenged by fluctuating axial load and irregular horizontal loading paths from 3-D earthquake excitations.This study introduces D_(iem),a material-based damage model for RC columns under random bidirectional loads and variable axial forces.Section damage indices of the plastic hinge are calculated by integrating the damage indices of concrete and steel fiber elements,considering their distance to the centroid axis.The P-Δeffect index is defined,and the component failure index is calculated using a combination of these indices.A hysteretic simulation and D_(iem)damage analysis program for cantilever RC columns is developed using Fortran.Three RC columns tested under bidirectional hysteretic loading are simulated to calibrate the program.Parameter analysis of 1,638 RC columns is conducted to verify D_(iem)’s applicability.The results demonstrated that D_(iem)’s failure assessment aligns with the 80%residual criterion.D_(iem)analysis of a real seismic damaged RC column shows satisfactory agreement with post-earthquake damage assessment and illustrates significant damage differences between columns with and without axial load fluctuation.
文摘The three-dimensional response of buried steel pipes under vehicle loads is investigated using the finite element analysis. The analysis is conducted using the finite element program ABAQUS. The effects of the vehicle parameters, pipeline parameters and soil parameters on the response of the buried pipeline were discussed. The results indicate that the maximum principal stresses in a buried pipe under vehicle loads are significant for burial depths of less than 1 m. The maximum principal stresses of the buried pipeline decrease as the burial depth, vehicle velocity and surrounding soil’s elasticity modulus increase. For small burial depths, the stresses in buried pipes caused by vehicle motion in the direction normal to the pipe axis are more critical. However, the effects of motion direction are insignificant when the burial depth and the surrounding soil’s elasticity modulus increase. As the diameter of a buried pipe decreases, the maximum principal stresses increase.
基金supported by the Chongqing Youth Talent Support Program(Cstc2022ycjh-bgzxm0079)the Chinese National Natural Science Foundation(52379128,51979152)+2 种基金Science Fund for Distinguished Young Scholars of Hubei Proivnce(2023AFA048)Educational Commission of Hubei Province of China(T2020005)the Young Top-notch Talent Cultivation Program of Hubei Province.
文摘In rock drilling and blasting,the misfire of electronic detonators will not only affect the rock fragmentation result but also bring serious potential safety hazards to engineering construction.An accurate and comprehensive understanding of the failure mechanisms of electronic detonators subjected to impact loading is of great significance to the reliability design and field safety use of electronic detonators.The spatial distribution characteristics and failure modes of misfired electronic detonators under different application scenarios are statistically analysed.The results show that under high impact loads,electronic detonators will experience failure phenomena such as rupture of the fuse head,fracture of the bridge wire,falling off of the solder joint,chip module damage and insufficient initiation energy after deformation.The lack of impact resistance is the primary cause of misfire of electronic detonators.Combined with the underwater impact resistance test and the impact load test in the adjacent blasthole on site,the formulas of the impact failure probability of the electronic detonator under different stress‒strength distribution curves are deduced.The test and evaluation method of the impact resistance of electronic detonators based on stress‒strength interference theory is proposed.Furthermore,the impact failure model of electronic detonators considering the strength degradation effect under repeated random loads is established.On this basis,the failure mechanism of electronic detonators under different application environments,such as open-pit blasting and underground blasting,is revealed,which provides scientific theory and methods for the reliability analysis,design and type selection of electronic detonators in rock drilling and blasting.
基金financially supported by the National Natural Science Foundation of China(Grant No.42172292)Taishan Scholars Project Special Funding,and Shandong Energy Group(Grant No.SNKJ 2022A01-R26).
文摘A conceptual model of intermittent joints is introduced to the cyclic shear test in the laboratory to explore the effects of loading parameters on its shear behavior under cyclic shear loading.The results show that the loading parameters(initial normal stress,normal stiffness,and shear velocity)determine propagation paths of the wing and secondary cracks in rock bridges during the initial shear cycle,creating different morphologies of macroscopic step-path rupture surfaces and asperities on them.The differences in stress state and rupture surface induce different cyclic shear responses.It shows that high initial normal stress accelerates asperity degradation,raises shear resistance,and promotes compression of intermittent joints.In addition,high normal stiffness provides higher normal stress and shear resistance during the initial cycles and inhibits the dilation and compression of intermittent joints.High shear velocity results in a higher shear resistance,greater dilation,and greater compression.Finally,shear strength is most sensitive to initial normal stress,followed by shear velocity and normal stiffness.Moreover,average dilation angle is most sensitive to initial normal stress,followed by normal stiffness and shear velocity.During the shear cycles,frictional coefficient is affected by asperity degradation,backfilling of rock debris,and frictional area,exhibiting a non-monotonic behavior.
文摘Non-seismically designed(NSD)beam-column joints are susceptible to joint shear failure under seismic loads.Although significant research is available on the seismic behavior of such joints of planar frames,the information on the seismic behavior of joints of space frames(3D joints)is insufficient.The 3D joints are subjected to bi-directional excitation,which results in an interaction between the shear strength obtained for the joint in the two orthogonal directions separately.The bi-directional seismic behavior of corner reinforced concrete(RC)joints is the focus of this study.First,a detailed finite element(FE)model using the FE software Abaqus,is developed and validated using the test results from the literature.The validated modeling procedure is used to conduct a parametric study to investigate the influence of different parameters such as concrete strength,dimensions of main and transverse beams framing into the joint,presence or absence of a slab,axial load ratio and loading direction on the seismic behavior of joints.By subjecting the models to different combinations of loads on the beams along perpendicular directions,the interaction of the joint shear strength in two orthogonal directions is studied.The comparison of the interaction curves of the joints obtained from the numerical study with a quadratic(circular)interaction curve indicates that in a majority of cases,the quadratic interaction model can represent the strength interaction diagrams of RC beam to column connections with governing joint shear failure reasonably well.
基金financially supported by National Natural Science Foundation of China(No.52304136)Young Talent of Lifting Engineering for Science and Technology in Shandong,China(No.SDAST2024QTA060)Key Project of Research and Development in Liaocheng(No.2023YD02)。
文摘It is important to analyze the damage evolution process of surrounding rock under different water content for the stability of engineering rock mass.Based on digital speckle correlation(DSCM),acoustic emission(AE)and electromagnetic radiation(EMR),uniaxial hierarchical cyclic loading and unloading tests were carried out on sandstones with different fracture numbers under dry,natural and saturated water content,to explore the fracture propagation,failure precursor characteristics and damage response mechanism under the influence of water content effect.The results show that with the increase of water content,the peak stress and crack initiation stress decrease gradually,and the decreases are 15.28%-21.11%and 17.64%-23.04%,respectively.The peak strain and crack initiation strain increase gradually,and the increases are 19.85%-44.53%and 19.15%-41.94%,respectively.The precracked rock with different water content is mainly characterized by tensile failure at different loading stages.However,with the increase of water content,the proportion of shear cracks gradually increases,while acoustic emission events gradually decrease,the dissipative energy and energy storage limits of the rock under peak load gradually decrease,and the charge signal increases significantly,which is because the lubrication effect of water reduces the friction coefficient between crack surfaces.
