In recent years,there has been a growing demand for more efficient and robust control strategies in cooperative multi-robot systems.This paper introduces the cascade explicit tube model predictive controller(CET-MPC),...In recent years,there has been a growing demand for more efficient and robust control strategies in cooperative multi-robot systems.This paper introduces the cascade explicit tube model predictive controller(CET-MPC),a control architecture designed specifically for distributed aerial robot systems.By integrating an explicit model predictive controller(MPC)with a tube MPC,our approach significantly reduces online computational demands while enhancing robustness against disturbances such as wind and measurement noise,as well as uncertainties in inertia parameters.Further,we incorporate a cascade controller to minimize steady-state errors and improve system performance dynamically.The results of this assessment provide valuable insights into the effectiveness and reliability of the CET-MPC approach under realistic operating conditions.The simulation results of flight scenarios for multi-agent quadrotors demonstrate the controller’s stability and accurate tracking of the desired path.By addressing the complexities of quadrotors’six degrees of freedom,this controller serves as a versatile solution applicable to a wide range of multi-robot systems with varying degrees of freedom,demonstrating its adaptability and scalability beyond the quadrotor domain.展开更多
Accurate trajectory tracking in lower-limb exoskeletons is challenged by the nonlinear,time-varying dynamics of human-robot interaction,limited sensor availability,and unknown external disturbances.This study proposes...Accurate trajectory tracking in lower-limb exoskeletons is challenged by the nonlinear,time-varying dynamics of human-robot interaction,limited sensor availability,and unknown external disturbances.This study proposes a novel control strategy that combines flatness-based control with two cascaded observers:a high-gain observer to estimate unmeasured joint velocities,and a nonlinear disturbance observer to reconstruct external torque disturbances in real time.These estimates are integrated into the control law to enable robust,state-feedback-based trajectory tracking.The approach is validated through simulation scenarios involving partial state measurements and abrupt external torque perturbations,reflecting realistic rehabilitation conditions.Results confirm that the proposed method significantly enhances tracking accuracy and disturbance rejection capability,demonstrating its strong potential for reliable and adaptive rehabilitation assistance.展开更多
In this paper,we show the performance benefits of connecting multiple observers within a control system.We focus here on a particular observer-based control approach,namely the active disturbance rejection control(ADR...In this paper,we show the performance benefits of connecting multiple observers within a control system.We focus here on a particular observer-based control approach,namely the active disturbance rejection control(ADRC)with cascade extended state observer(ESO).For this framework,we analyze the control performance in terms of quality of observer estimation,reference tracking,disturbance rejection,sensitivity to measurement noise/unmodeled dynamics,and overall stability.A comprehensive frequency response analysis is performed to study the influence of cascading the observers on the selected quality criteria.To make the inquiry beneficial also to practitioners,FPGA-in-the-loop tests are conducted using a guided missiles gimbaled seeker.They validate the theoretical findings in discretetime settings,where the sampling time and hardware resource requirements become a factor.The results of the investigation are distilled into guidelines for prospective users on when and how a cascade observer structure can be useful for controls.展开更多
The cascaded H-bridge(CHB)multilevel inverter has become one of the most widely used PV inverter topologies due to its high voltage processing capability and high quality output power.Grid-connected PV system due to e...The cascaded H-bridge(CHB)multilevel inverter has become one of the most widely used PV inverter topologies due to its high voltage processing capability and high quality output power.Grid-connected PV system due to external conditions such as PV panel shading,PV component damage,can lead to PV output power imbalance,triggering the system over-modulation phenomenon,which in turn leads to grid-connected current waveform distortion.To this end,an improved power balance control strategy is proposed in this paper.Firstly,according to the different modulation ratios of each H-bridge module,a suitable harmonic injection method is used to keep the peak value of the modulating waveform always at 1;then an inverse triangular trapezoidal waveform is injected to optimize the modulating waveform,which further improves the output voltage waveform,reduces the THD value of the grid-connected currents,and maintains the stability of power inside the CHB system.Purpose.Simulation verifies the effectiveness and feasibility of this power balance control strategy.展开更多
During the startup of the hydraulic turbine generators,the hybrid magnetic bearing support system exhibits displacement fluctuations,and the nonlinearity and strong coupling characteristics of the magnetic bearings li...During the startup of the hydraulic turbine generators,the hybrid magnetic bearing support system exhibits displacement fluctuations,and the nonlinearity and strong coupling characteristics of the magnetic bearings limit the accuracy of rotor modeling,making traditional control methods difficult to adapt to parameter variations.To suppress startup disturbances and achieve a control strategy with low computational complexity and high precision,this paper proposes a five-degree-of-freedom hybrid magnetic bearing control strategy based on an improved cascaded reduced-order linear active disturbance rejection controller(CRLADRC).The front-stage reduced-order linear extended state observer(FRLESO)reduces the system’s computational complexity,enabling the system to maintain stability during motor startup disturbances.The second-stage reduced-order linear extended state observer(SRLESO)further enhances the system’s disturbance estimation accuracy while maintaining low computational complexity.Furthermore,the disturbance rejection and noise suppression capabilities are analyzed in the frequency domain and the stability of the proposed control method is proven using Lyapunov theory.Experimental results indicate that the proposed strategy effectively reduces displacement fluctuations in the hybrid magnetic bearing support system during motor startup,significantly enhancing the system’s robustness.展开更多
This paper presents a novel active disturbance rejection control(ADRC)scheme based on a cascade connection of generalized proportional integral observers(GPIOs)with internal models designed to estimate both polynomial...This paper presents a novel active disturbance rejection control(ADRC)scheme based on a cascade connection of generalized proportional integral observers(GPIOs)with internal models designed to estimate both polynomial and resonant disturbances.In this estimator structure,referred to as Cascade GPIO(CGPIO),the total disturbance sensitivity is the product of the sensitivities at each cascade level.This approach improves system performance against both periodic and non-periodic disturbances and enhances robustness under frequency variations in harmonic components.Additionally,the decoupled nature of the estimator reduces the order of the GPIOs,thereby simplifying tuning and limiting observer gains.The proposed control scheme is supported by a frequency-domain analysis and is experimentally validated in the current control of a grid-connected converter subject to control gain uncertainties,harmonic distortion,frequency deviations,and measurement noise.Experimental results demonstrate that the CGPIO-based ADRC outperforms benchmark solutions,including proportional-integral(PI)and proportional-resonant(PR)controllers.展开更多
A new cascade control program was proposed based on modified internal model control to handle stable,unstable and integrating processes with time delay.The program had totally four controllers of which the secondary l...A new cascade control program was proposed based on modified internal model control to handle stable,unstable and integrating processes with time delay.The program had totally four controllers of which the secondary loop had two controllers and the primary loop had two controllers.The two secondary loop controllers were designed using IMC technique.They were decoupled completely and could be adjusted independently,which avoided the undesirable influence on performance of the primary controllers.The main controller in the primary loop was devised as a PID using the method of minimum sensitivity,which could guarantee not only the nominal performance but also the robust stability of the system.A setpoint filter was added in the primary loop to improve the tracking performance.All the controllers of the two closed-loops were designed analytically,and could be adjusted and optimized by single parameter respectively.Simulations were carried out on three various processes with time delay,and the results show that the proposed method can provide a better performance of both set-point tracking and disturbance rejection and robustness against parameters perturbation.展开更多
A new decentralized closcd-loop identification and predictive controller design method for a kind of cascade processes composed of several sub-processes is studied. This kind of cascade processcs has the characteristi...A new decentralized closcd-loop identification and predictive controller design method for a kind of cascade processes composed of several sub-processes is studied. This kind of cascade processcs has the characteristies of one-way connection. The process is divided into several two-input-two-output （TITO） sub-systems. The parameters of the first-order plus dead-time models for the transfer function matrices can be obtained using least squares method. Hence a distributed model predictive contn,ller is designed based on the coupling models of each sub-process. Simulation results on the temperature control of a reheating furnace are given to show the efficiency of the algorithm.展开更多
Aiming at characteristic of time delay, time-varying parameters and much disturb in glass greenhouse heating system, fuzzy smith cascade compound control policy based on typical PID cascade compound control policy is ...Aiming at characteristic of time delay, time-varying parameters and much disturb in glass greenhouse heating system, fuzzy smith cascade compound control policy based on typical PID cascade compound control policy is proposed. Simulation results show that it is effective to overcome the influence of time delay on stability of control system and the system possesses strong robust and good dynamic performance..展开更多
Present day power scenarios demand a high quality uninterrupted power supply and needs environmental issues to be addressed. Both concerns can be dealt with by the introduction of the renewable sources to the existing...Present day power scenarios demand a high quality uninterrupted power supply and needs environmental issues to be addressed. Both concerns can be dealt with by the introduction of the renewable sources to the existing power system. Thus, automatic generation control(AGC) with diverse renewable sources and a modified-cascaded controller are presented in the paper.Also, a new hybrid scheme of the improved teaching learning based optimization-differential evolution(hITLBO-DE) algorithm is applied for providing optimization of controller parameters. A study of the system with a technique such as TLBO applied to a proportional integral derivative(PID), integral double derivative(IDD) and PIDD is compared to hITLBO-DE tuned cascaded controller with dynamic load change.The suggested methodology has been extensively applied to a 2-area system with a diverse source power system with various operation time non-linearities such as dead-band of, generation rate constraint and reheat thermal units. The multi-area system with reheat thermal plants, hydel plants and a unit of a wind-diesel combination is tested with the cascaded controller scheme with a different controller setting for each area. The variation of the load is taken within 1% to 5% of the connected load and robustness analysis is shown by modifying essential factors simultaneously by± 30%. Finally, the proposed scheme of controller and optimization technique is also tested with a 5-equal area thermal system with non-linearities. The simulation results demonstrate the superiority of the proposed controller and algorithm under a dynamically changing load.展开更多
The synchronous tracking control problem of a hydraulic parallel manipulator with six degrees of freedom (DOF) is complicated since the inclusion of hydraulic elements increases the order of the system.To solve this p...The synchronous tracking control problem of a hydraulic parallel manipulator with six degrees of freedom (DOF) is complicated since the inclusion of hydraulic elements increases the order of the system.To solve this problem,cascade control method with an inner/outer-loop control structure is used,which masks the hydraulic dynamics with the inner-loop so that the designed controller takes into account of both the mechanical dynamics and the hydraulic dynamics of the manipulator.Furthermore,a cross-coupling control approach is introduced to the synchronous tracking control of the manipulator.The position synchronization error is developed by considering motion synchronization between each actuator joint and its adjacent ones based on the synchronous goal.Then,with the feedback of both position error and synchronization error,the tracking is proven to guarantee that both the position errors and synchronization errors asymptotically converge to zero.Moreover,the effectiveness of the proposed approach is verified by the experimental results performed with a 6-DOF hydraulic parallel manipulator.展开更多
To effectively reduce the loss of strong shock wave at the trailing edge of the supersonic cascade under high backpressure,a shock wave control method based on self-sustaining synthetic jet was proposed.The self-susta...To effectively reduce the loss of strong shock wave at the trailing edge of the supersonic cascade under high backpressure,a shock wave control method based on self-sustaining synthetic jet was proposed.The self-sustaining synthetic jet was applied on the pressure side of the blade with the blow slot and the bleed slot arranged upstream and downstream of the trailing-edge shock,respectively.The flow control mechanism and effects of parameters were investigated by numerical simulation.The results show that the self-sustaining synthetic jet forms an oblique shock wave in the cascade passage which slows down and pressurizes the airflow,and the expansion wave downstream of the blow slot weakens the shock strength which can effectively change the Mach reflection to regular reflection and thus weaken the shock loss.And the suction effect can reduce loss near blade surface.Compared with the baseline cascade,the self-sustaining jet actuator can reduce flow losses by 6.73%with proper location design and vibration of diaphragm.展开更多
This paper is concerned with event-triggered control of discrete-time systems with or without input saturation.First,an accumulative-error-based event-triggered scheme is devised for control updates.When the accumulat...This paper is concerned with event-triggered control of discrete-time systems with or without input saturation.First,an accumulative-error-based event-triggered scheme is devised for control updates.When the accumulated error between the current state and the latest control update exceeds a certain threshold,an event is triggered.Such a scheme can ensure the event-generator works at a relatively low rate rather than falls into hibernation especially after the system steps into its steady state.Second,the looped functional method for continuous-time systems is extended to discrete-time systems.By introducing an innovative looped functional that links the event-triggered scheme,some sufficient conditions for the co-design of control gain and event-triggered parameters are obtained in terms of linear matrix inequalities with a couple of tuning parameters.Then,the proposed method is applied to discrete-time systems with input saturation.As a result,both suitable control gains and event-triggered parameters are also co-designed to ensure the system trajectories converge to the region of attraction.Finally,an unstable reactor system and an inverted pendulum system are given to show the effectiveness of the proposed method.展开更多
Cascade control is one of the most popular structures for process control as it is a special architecture for dealing with disturbances. However, the drawbacks of cascade control are obvious that primary controller an...Cascade control is one of the most popular structures for process control as it is a special architecture for dealing with disturbances. However, the drawbacks of cascade control are obvious that primary controller and secondary controller should be tuned together, which influences each other. In this paper, a new Adaptive Cascade Generalized Predictive Controller (ACGPC) is introduced. ACGPC is a method issued from GPC and the inner and outer controllers of a cascade system are replaced by one cascade generalized predictive controller, where both loops model are updated by Recursive Least Squares method. Compared with existing methods, the new method is simpler and yet more effective. It can be directly integrated into commercially available industrial auto-tuning systems. Some examples are given to illustrate the effectiveness and robustness of the proposed method.展开更多
A novel distributed model predictive control scheme based on dynamic integrated system optimization and parameter estimation （DISOPE） was proposed for nonlinear cascade systems under network environment. Under the d...A novel distributed model predictive control scheme based on dynamic integrated system optimization and parameter estimation （DISOPE） was proposed for nonlinear cascade systems under network environment. Under the distributed control structure, online optimization of the cascade system was composed of several cascaded agents that can cooperate and exchange information via network communication. By iterating on modified distributed linear optimal control problems on the basis of estimating parameters at every iteration the correct optimal control action of the nonlinear model predictive control problem of the cascade system could be obtained, assuming that the algorithm was convergent. This approach avoids solving the complex nonlinear optimization problem and significantly reduces the computational burden. The simulation results of the fossil fuel power unit are illustrated to verify the effectiveness and practicability of the proposed algorithm.展开更多
Precise position tracking control of the single-rod pneumatic actuator is considered and a nonlinear cascade controller is developed.The proposed controller comprises an extended disturbance observer(EDOB)and a nonlin...Precise position tracking control of the single-rod pneumatic actuator is considered and a nonlinear cascade controller is developed.The proposed controller comprises an extended disturbance observer(EDOB)and a nonlinear robust control law synthesized by the backstepping method.The EDOB is designed to estimate not only the influence of disturbances but also the parameter uncertainties.With the use of parameter and disturbance estimates,the nonlinear cascade controller,which consists of an outer position tracking loop and an inner load pressure loop,is further designed to attenuate the effects of parameter and disturbance estimation errors.The stability of the closed-loop system is proven by means of Lyapunov theory.Extensive comparative experimental results obtained verify the effectiveness of the proposed nonlinear cascade controller and its performance robustness to parameter and external disturbance variations in practical implementation.展开更多
This paper focuses on the problem of leaderfollowing consensus for nonlinear cascaded multi-agent systems.The control strategies for these systems are transformed into successive control problem schemes for lower-orde...This paper focuses on the problem of leaderfollowing consensus for nonlinear cascaded multi-agent systems.The control strategies for these systems are transformed into successive control problem schemes for lower-order error subsystems.A distributed consensus analysis for the corresponding error systems is conducted by employing recursive methods and virtual controllers,accompanied by a series of Lyapunov functions devised throughout the iterative process,which solves the leaderfollowing consensus problem of a class of nonlinear cascaded multi-agent systems.Specific simulation examples illustrate the effectiveness of the proposed control algorithm.展开更多
With the development of space-based remote sensing and deep space exploration technology,higher standards for temperature stability and uniformity of payloads have been proposed to spacecraft thermal control systems.A...With the development of space-based remote sensing and deep space exploration technology,higher standards for temperature stability and uniformity of payloads have been proposed to spacecraft thermal control systems.As an efficient two-phase heat transfer device with active temperature control capabilities,the loop heat pipe(LHP)can be widely applied in spacecraft thermal control systems to achieve reliable temperature control under various operating modes and complex space thermal environments.This paper analyzes the fundamental theories of thermal switch-controlled,reservoir temperature-controlled,and bypass valve-controlled LHPs.The focus is on the theories and methods of achieving high-precision and high-reliability temperature control via active reservoir temperature control.Novel control techniques in recent years,such as non-condensable gas(NCG)control with a temperature stability of 0.01℃ ,are also briefly introduced as promising approaches to improve LHP performance.The on-orbit performance and characteristics of various LHP temperature control methods are provided and ranked in terms of control precision,energy consumption,complexity,and weight.Thermoelectric cooler(TEC)/electrical heater,as the foundation of reservoir temperature control,can achieve a temperature stability of in space applications under±0.2℃ a wide range of heat load.Microgravity model,control strategy,and operating mode conversion are three optimization directions that would hopefully further expand the application scenario of reservoir temperature control.Specific design principles and challenges for corresponding directions are summarized as guidance for researchers.展开更多
Dynamically tunable terahertz(THz)beam focusing plays a critical role in emerging applications including reconfigurable imaging,localized spectral analysis,and micro-machining.Conventional methods,however,frequently e...Dynamically tunable terahertz(THz)beam focusing plays a critical role in emerging applications including reconfigurable imaging,localized spectral analysis,and micro-machining.Conventional methods,however,frequently employ complex wavefront modulators and external control algorithms,resulting in increased system footprint and limited tuning efficiency.In this work,we present an all-silicon mechanically rotatable cascaded metasurface capable of dynamic THz beam focusing.By independently adjusting the relative rotation angles between the two metasurface layers,real-time repositioning of the focal spot is achieved for orthogonal circular polarization channels.The proposed design facilitates polarization-division multiplexing without requiring external algorithms or active materials while preserving high focusing efficiency and beam quality across a predefined focal plane.Numerical simulations reveal a quasi-linear shift of the focal position with the rotation angle,with stable focusing efficiency and full-width at half-maximum observed in both polarization channels.This strategy offers an efficient and reliable approach to dynamic wavefront control for compact,reconfigurable THz imaging,sensing,and communication systems.展开更多
Aberration-corrected focus scanning is crucial for high-precision optics,but the conventional optical systems rely on bulky and complicated dynamic correctors.Recently,Shiyi Xiao's group proposed a method using tw...Aberration-corrected focus scanning is crucial for high-precision optics,but the conventional optical systems rely on bulky and complicated dynamic correctors.Recently,Shiyi Xiao's group proposed a method using two rotating cascaded transmissive metasurfaces for adaptive aberration correction in focus scanning.The optimized phase profiles enable precise control of the focal position for scanning custom-curved surfaces.This concept was experimentally validated by two allsilicon meta-devices in the terahertz regime,paving the way for high-precision and compact optical devices in various applications.展开更多
文摘In recent years,there has been a growing demand for more efficient and robust control strategies in cooperative multi-robot systems.This paper introduces the cascade explicit tube model predictive controller(CET-MPC),a control architecture designed specifically for distributed aerial robot systems.By integrating an explicit model predictive controller(MPC)with a tube MPC,our approach significantly reduces online computational demands while enhancing robustness against disturbances such as wind and measurement noise,as well as uncertainties in inertia parameters.Further,we incorporate a cascade controller to minimize steady-state errors and improve system performance dynamically.The results of this assessment provide valuable insights into the effectiveness and reliability of the CET-MPC approach under realistic operating conditions.The simulation results of flight scenarios for multi-agent quadrotors demonstrate the controller’s stability and accurate tracking of the desired path.By addressing the complexities of quadrotors’six degrees of freedom,this controller serves as a versatile solution applicable to a wide range of multi-robot systems with varying degrees of freedom,demonstrating its adaptability and scalability beyond the quadrotor domain.
基金funded by the King Salman Center for Disability Research,through Research Group No.KSRG-2024-468.
文摘Accurate trajectory tracking in lower-limb exoskeletons is challenged by the nonlinear,time-varying dynamics of human-robot interaction,limited sensor availability,and unknown external disturbances.This study proposes a novel control strategy that combines flatness-based control with two cascaded observers:a high-gain observer to estimate unmeasured joint velocities,and a nonlinear disturbance observer to reconstruct external torque disturbances in real time.These estimates are integrated into the control law to enable robust,state-feedback-based trajectory tracking.The approach is validated through simulation scenarios involving partial state measurements and abrupt external torque perturbations,reflecting realistic rehabilitation conditions.Results confirm that the proposed method significantly enhances tracking accuracy and disturbance rejection capability,demonstrating its strong potential for reliable and adaptive rehabilitation assistance.
基金supported by the project of the University of Defence in Belgrade,Serbia(VA/TT/1/25-27)。
文摘In this paper,we show the performance benefits of connecting multiple observers within a control system.We focus here on a particular observer-based control approach,namely the active disturbance rejection control(ADRC)with cascade extended state observer(ESO).For this framework,we analyze the control performance in terms of quality of observer estimation,reference tracking,disturbance rejection,sensitivity to measurement noise/unmodeled dynamics,and overall stability.A comprehensive frequency response analysis is performed to study the influence of cascading the observers on the selected quality criteria.To make the inquiry beneficial also to practitioners,FPGA-in-the-loop tests are conducted using a guided missiles gimbaled seeker.They validate the theoretical findings in discretetime settings,where the sampling time and hardware resource requirements become a factor.The results of the investigation are distilled into guidelines for prospective users on when and how a cascade observer structure can be useful for controls.
基金supported by the National Natural Science Foundation of China,Regional Science Foundation Project,52367009,Study on Bow Net Dynamics Modeling and Coupling Smoothness of High speed AC Rigid Network in the Long Tunnel Section of Sichuan Tibet Railway.
文摘The cascaded H-bridge(CHB)multilevel inverter has become one of the most widely used PV inverter topologies due to its high voltage processing capability and high quality output power.Grid-connected PV system due to external conditions such as PV panel shading,PV component damage,can lead to PV output power imbalance,triggering the system over-modulation phenomenon,which in turn leads to grid-connected current waveform distortion.To this end,an improved power balance control strategy is proposed in this paper.Firstly,according to the different modulation ratios of each H-bridge module,a suitable harmonic injection method is used to keep the peak value of the modulating waveform always at 1;then an inverse triangular trapezoidal waveform is injected to optimize the modulating waveform,which further improves the output voltage waveform,reduces the THD value of the grid-connected currents,and maintains the stability of power inside the CHB system.Purpose.Simulation verifies the effectiveness and feasibility of this power balance control strategy.
基金supported by the National Natural Science Foundation of China under Grant 52302458the CAS Project for Young Scientists in Basic Research,Grant No.YSBR-045.
文摘During the startup of the hydraulic turbine generators,the hybrid magnetic bearing support system exhibits displacement fluctuations,and the nonlinearity and strong coupling characteristics of the magnetic bearings limit the accuracy of rotor modeling,making traditional control methods difficult to adapt to parameter variations.To suppress startup disturbances and achieve a control strategy with low computational complexity and high precision,this paper proposes a five-degree-of-freedom hybrid magnetic bearing control strategy based on an improved cascaded reduced-order linear active disturbance rejection controller(CRLADRC).The front-stage reduced-order linear extended state observer(FRLESO)reduces the system’s computational complexity,enabling the system to maintain stability during motor startup disturbances.The second-stage reduced-order linear extended state observer(SRLESO)further enhances the system’s disturbance estimation accuracy while maintaining low computational complexity.Furthermore,the disturbance rejection and noise suppression capabilities are analyzed in the frequency domain and the stability of the proposed control method is proven using Lyapunov theory.Experimental results indicate that the proposed strategy effectively reduces displacement fluctuations in the hybrid magnetic bearing support system during motor startup,significantly enhancing the system’s robustness.
文摘This paper presents a novel active disturbance rejection control(ADRC)scheme based on a cascade connection of generalized proportional integral observers(GPIOs)with internal models designed to estimate both polynomial and resonant disturbances.In this estimator structure,referred to as Cascade GPIO(CGPIO),the total disturbance sensitivity is the product of the sensitivities at each cascade level.This approach improves system performance against both periodic and non-periodic disturbances and enhances robustness under frequency variations in harmonic components.Additionally,the decoupled nature of the estimator reduces the order of the GPIOs,thereby simplifying tuning and limiting observer gains.The proposed control scheme is supported by a frequency-domain analysis and is experimentally validated in the current control of a grid-connected converter subject to control gain uncertainties,harmonic distortion,frequency deviations,and measurement noise.Experimental results demonstrate that the CGPIO-based ADRC outperforms benchmark solutions,including proportional-integral(PI)and proportional-resonant(PR)controllers.
基金Project(J11LG02) supported by the Science and Technology Funds of Education Department of Shandong Province,China
文摘A new cascade control program was proposed based on modified internal model control to handle stable,unstable and integrating processes with time delay.The program had totally four controllers of which the secondary loop had two controllers and the primary loop had two controllers.The two secondary loop controllers were designed using IMC technique.They were decoupled completely and could be adjusted independently,which avoided the undesirable influence on performance of the primary controllers.The main controller in the primary loop was devised as a PID using the method of minimum sensitivity,which could guarantee not only the nominal performance but also the robust stability of the system.A setpoint filter was added in the primary loop to improve the tracking performance.All the controllers of the two closed-loops were designed analytically,and could be adjusted and optimized by single parameter respectively.Simulations were carried out on three various processes with time delay,and the results show that the proposed method can provide a better performance of both set-point tracking and disturbance rejection and robustness against parameters perturbation.
基金国家高技术研究发展计划(863计划)，the National Natural Science Foundation of China，教育部新世纪高校优秀人才计划
文摘A new decentralized closcd-loop identification and predictive controller design method for a kind of cascade processes composed of several sub-processes is studied. This kind of cascade processcs has the characteristies of one-way connection. The process is divided into several two-input-two-output （TITO） sub-systems. The parameters of the first-order plus dead-time models for the transfer function matrices can be obtained using least squares method. Hence a distributed model predictive contn,ller is designed based on the coupling models of each sub-process. Simulation results on the temperature control of a reheating furnace are given to show the efficiency of the algorithm.
文摘Aiming at characteristic of time delay, time-varying parameters and much disturb in glass greenhouse heating system, fuzzy smith cascade compound control policy based on typical PID cascade compound control policy is proposed. Simulation results show that it is effective to overcome the influence of time delay on stability of control system and the system possesses strong robust and good dynamic performance..
文摘Present day power scenarios demand a high quality uninterrupted power supply and needs environmental issues to be addressed. Both concerns can be dealt with by the introduction of the renewable sources to the existing power system. Thus, automatic generation control(AGC) with diverse renewable sources and a modified-cascaded controller are presented in the paper.Also, a new hybrid scheme of the improved teaching learning based optimization-differential evolution(hITLBO-DE) algorithm is applied for providing optimization of controller parameters. A study of the system with a technique such as TLBO applied to a proportional integral derivative(PID), integral double derivative(IDD) and PIDD is compared to hITLBO-DE tuned cascaded controller with dynamic load change.The suggested methodology has been extensively applied to a 2-area system with a diverse source power system with various operation time non-linearities such as dead-band of, generation rate constraint and reheat thermal units. The multi-area system with reheat thermal plants, hydel plants and a unit of a wind-diesel combination is tested with the cascaded controller scheme with a different controller setting for each area. The variation of the load is taken within 1% to 5% of the connected load and robustness analysis is shown by modifying essential factors simultaneously by± 30%. Finally, the proposed scheme of controller and optimization technique is also tested with a 5-equal area thermal system with non-linearities. The simulation results demonstrate the superiority of the proposed controller and algorithm under a dynamically changing load.
基金Project(50375139) supported by the National Natural Science Foundation of ChinaProject(NCET-04-0545) supported by the New Century Excellent Talent Plan of the Ministry of Education of China
文摘The synchronous tracking control problem of a hydraulic parallel manipulator with six degrees of freedom (DOF) is complicated since the inclusion of hydraulic elements increases the order of the system.To solve this problem,cascade control method with an inner/outer-loop control structure is used,which masks the hydraulic dynamics with the inner-loop so that the designed controller takes into account of both the mechanical dynamics and the hydraulic dynamics of the manipulator.Furthermore,a cross-coupling control approach is introduced to the synchronous tracking control of the manipulator.The position synchronization error is developed by considering motion synchronization between each actuator joint and its adjacent ones based on the synchronous goal.Then,with the feedback of both position error and synchronization error,the tracking is proven to guarantee that both the position errors and synchronization errors asymptotically converge to zero.Moreover,the effectiveness of the proposed approach is verified by the experimental results performed with a 6-DOF hydraulic parallel manipulator.
基金co-supported by the National Natural Science Foundation of China(No.52075538)the National Science and Technology Major Project,China(No.J2019-II-0016-0037)+1 种基金the Natural Science Foundation of Hunan Province,China(No.2020 JJ2030)the Foundation of National University of Defense Technology,China(No.ZK-22-30)。
文摘To effectively reduce the loss of strong shock wave at the trailing edge of the supersonic cascade under high backpressure,a shock wave control method based on self-sustaining synthetic jet was proposed.The self-sustaining synthetic jet was applied on the pressure side of the blade with the blow slot and the bleed slot arranged upstream and downstream of the trailing-edge shock,respectively.The flow control mechanism and effects of parameters were investigated by numerical simulation.The results show that the self-sustaining synthetic jet forms an oblique shock wave in the cascade passage which slows down and pressurizes the airflow,and the expansion wave downstream of the blow slot weakens the shock strength which can effectively change the Mach reflection to regular reflection and thus weaken the shock loss.And the suction effect can reduce loss near blade surface.Compared with the baseline cascade,the self-sustaining jet actuator can reduce flow losses by 6.73%with proper location design and vibration of diaphragm.
基金supported in part by the National Natural Science Foundation of China(62473221)the Natural Science Foundation of Shandong Province,China(ZR2024MF006)Qingdao Natural Science Foundation(24-4-4-zrjj-165-jch)。
文摘This paper is concerned with event-triggered control of discrete-time systems with or without input saturation.First,an accumulative-error-based event-triggered scheme is devised for control updates.When the accumulated error between the current state and the latest control update exceeds a certain threshold,an event is triggered.Such a scheme can ensure the event-generator works at a relatively low rate rather than falls into hibernation especially after the system steps into its steady state.Second,the looped functional method for continuous-time systems is extended to discrete-time systems.By introducing an innovative looped functional that links the event-triggered scheme,some sufficient conditions for the co-design of control gain and event-triggered parameters are obtained in terms of linear matrix inequalities with a couple of tuning parameters.Then,the proposed method is applied to discrete-time systems with input saturation.As a result,both suitable control gains and event-triggered parameters are also co-designed to ensure the system trajectories converge to the region of attraction.Finally,an unstable reactor system and an inverted pendulum system are given to show the effectiveness of the proposed method.
文摘Cascade control is one of the most popular structures for process control as it is a special architecture for dealing with disturbances. However, the drawbacks of cascade control are obvious that primary controller and secondary controller should be tuned together, which influences each other. In this paper, a new Adaptive Cascade Generalized Predictive Controller (ACGPC) is introduced. ACGPC is a method issued from GPC and the inner and outer controllers of a cascade system are replaced by one cascade generalized predictive controller, where both loops model are updated by Recursive Least Squares method. Compared with existing methods, the new method is simpler and yet more effective. It can be directly integrated into commercially available industrial auto-tuning systems. Some examples are given to illustrate the effectiveness and robustness of the proposed method.
基金This work was supportedbytheNationalNaturalScienceFoundationofChina(No.60474051),theProgramforNewCenturyExcellentTalentsinUniversityofChina(NCET),andtheSpecializedResearchFundfortheDoctoralProgramofHigherEducationofChina(No.20020248028).
文摘A novel distributed model predictive control scheme based on dynamic integrated system optimization and parameter estimation （DISOPE） was proposed for nonlinear cascade systems under network environment. Under the distributed control structure, online optimization of the cascade system was composed of several cascaded agents that can cooperate and exchange information via network communication. By iterating on modified distributed linear optimal control problems on the basis of estimating parameters at every iteration the correct optimal control action of the nonlinear model predictive control problem of the cascade system could be obtained, assuming that the algorithm was convergent. This approach avoids solving the complex nonlinear optimization problem and significantly reduces the computational burden. The simulation results of the fossil fuel power unit are illustrated to verify the effectiveness and practicability of the proposed algorithm.
基金Project(51505474)supported by the National Natural Science Foundation of ChinaProject(2015XKMS020)supported by the Fundamental Research Funds for the Central Universities,China+1 种基金Project(2016T90520)supported by the China Postdoctoral Science FoundationProject supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions,China
文摘Precise position tracking control of the single-rod pneumatic actuator is considered and a nonlinear cascade controller is developed.The proposed controller comprises an extended disturbance observer(EDOB)and a nonlinear robust control law synthesized by the backstepping method.The EDOB is designed to estimate not only the influence of disturbances but also the parameter uncertainties.With the use of parameter and disturbance estimates,the nonlinear cascade controller,which consists of an outer position tracking loop and an inner load pressure loop,is further designed to attenuate the effects of parameter and disturbance estimation errors.The stability of the closed-loop system is proven by means of Lyapunov theory.Extensive comparative experimental results obtained verify the effectiveness of the proposed nonlinear cascade controller and its performance robustness to parameter and external disturbance variations in practical implementation.
基金National Natural Science Foundation of China(No.12071370)。
文摘This paper focuses on the problem of leaderfollowing consensus for nonlinear cascaded multi-agent systems.The control strategies for these systems are transformed into successive control problem schemes for lower-order error subsystems.A distributed consensus analysis for the corresponding error systems is conducted by employing recursive methods and virtual controllers,accompanied by a series of Lyapunov functions devised throughout the iterative process,which solves the leaderfollowing consensus problem of a class of nonlinear cascaded multi-agent systems.Specific simulation examples illustrate the effectiveness of the proposed control algorithm.
基金funded by National Outstanding Youth Foundation of China,grant number 2020-JCJQ-ZQ-042.
文摘With the development of space-based remote sensing and deep space exploration technology,higher standards for temperature stability and uniformity of payloads have been proposed to spacecraft thermal control systems.As an efficient two-phase heat transfer device with active temperature control capabilities,the loop heat pipe(LHP)can be widely applied in spacecraft thermal control systems to achieve reliable temperature control under various operating modes and complex space thermal environments.This paper analyzes the fundamental theories of thermal switch-controlled,reservoir temperature-controlled,and bypass valve-controlled LHPs.The focus is on the theories and methods of achieving high-precision and high-reliability temperature control via active reservoir temperature control.Novel control techniques in recent years,such as non-condensable gas(NCG)control with a temperature stability of 0.01℃ ,are also briefly introduced as promising approaches to improve LHP performance.The on-orbit performance and characteristics of various LHP temperature control methods are provided and ranked in terms of control precision,energy consumption,complexity,and weight.Thermoelectric cooler(TEC)/electrical heater,as the foundation of reservoir temperature control,can achieve a temperature stability of in space applications under±0.2℃ a wide range of heat load.Microgravity model,control strategy,and operating mode conversion are three optimization directions that would hopefully further expand the application scenario of reservoir temperature control.Specific design principles and challenges for corresponding directions are summarized as guidance for researchers.
基金supported by the National Natural Science Foundation of China(Grants U22A2008,12404484,12464016,and 62405219)the Double First Class Joint Special Key Project of Yunnan Science and Technology Department and Yunnan University(Grant 202401BF070001-012)Sichuan Provincial Science and Technology Support Program(Grant 25QNJJ2419).
文摘Dynamically tunable terahertz(THz)beam focusing plays a critical role in emerging applications including reconfigurable imaging,localized spectral analysis,and micro-machining.Conventional methods,however,frequently employ complex wavefront modulators and external control algorithms,resulting in increased system footprint and limited tuning efficiency.In this work,we present an all-silicon mechanically rotatable cascaded metasurface capable of dynamic THz beam focusing.By independently adjusting the relative rotation angles between the two metasurface layers,real-time repositioning of the focal spot is achieved for orthogonal circular polarization channels.The proposed design facilitates polarization-division multiplexing without requiring external algorithms or active materials while preserving high focusing efficiency and beam quality across a predefined focal plane.Numerical simulations reveal a quasi-linear shift of the focal position with the rotation angle,with stable focusing efficiency and full-width at half-maximum observed in both polarization channels.This strategy offers an efficient and reliable approach to dynamic wavefront control for compact,reconfigurable THz imaging,sensing,and communication systems.
文摘Aberration-corrected focus scanning is crucial for high-precision optics,but the conventional optical systems rely on bulky and complicated dynamic correctors.Recently,Shiyi Xiao's group proposed a method using two rotating cascaded transmissive metasurfaces for adaptive aberration correction in focus scanning.The optimized phase profiles enable precise control of the focal position for scanning custom-curved surfaces.This concept was experimentally validated by two allsilicon meta-devices in the terahertz regime,paving the way for high-precision and compact optical devices in various applications.
