Based on a stochastic wire length distributed model, the interconnect distribution of a three-dimensional integrated circuit （3D IC） is predicted exactly. Using the results of this model, a global interconnect desig...Based on a stochastic wire length distributed model, the interconnect distribution of a three-dimensional integrated circuit （3D IC） is predicted exactly. Using the results of this model, a global interconnect design window for a giga-scale system-on-chip （SOC） is established by evaluating the constraints of 1） wiring resource, 2） wiring bandwidth, and 3） wiring noise. In comparison to a two-dimensional integrated circuit （2D IC） in a 130-nm and 45-nm technology node, the design window expands for a 3D IC to improve the design reliability and system performance, further supporting 3D IC application in future integrated circuit design.展开更多
Although the shape-based method has been proven to be useful for low-thrust trajectory design,and be capable to provide near-optimal solution for a more accurate trajectory optimization method,it is slightly non-effec...Although the shape-based method has been proven to be useful for low-thrust trajectory design,and be capable to provide near-optimal solution for a more accurate trajectory optimization method,it is slightly non-effective when used in some 3D cases.In this paper,a modified 3D shape-based method is proposed for earth trajectory design.In this approach,in consideration of the sinusoidal periodic variation in z direction of actual trajectory,a new exponential sinusoid model is chosen for the out-of-plane motion,with four coefficients such that four scalar out-of-plane boundary conditions can be satisfied.After deriving the 3D shape-based procedure,low-thrust trajectory design example with modest inclination change is given.The results demonstrate that this modified approach is feasible for the transfer trajectory design,and comparing to the former shape-based method,the z direction solution is more coincident with the actual situation,furthermore,the solution may be used for further mission planning,trajectory evaluation and optimization.展开更多
With the reduction of urban land, the three-dimensional garage is increasingly built with its advantages of saving land. But the current three-dimensional garage is built for the car. It is hardly stereo parking garag...With the reduction of urban land, the three-dimensional garage is increasingly built with its advantages of saving land. But the current three-dimensional garage is built for the car. It is hardly stereo parking garage for electric bicycles. This paper designed a hollow tower electric bicycle stereo parking garage with fork comb structure, based on the analysis of the characteristics of electric bicycles and the characteristics of existing three-dimensional garages. A fixed comb is mounted on the garage frame. The movable comb is mounted on the middle lift mechanism of the garage. The access of the vehicle is achieved by the exchange of the comb. The key comb structure was modeled using SolidWorks software and the stress distribution of the structure was analyzed. It was optimized by MATLAB software. The result shows that this structure can improve access efficiency. The quality of the comb structure can be minimized under the constraints of strength requirements.展开更多
The changes of design methods and manufacturing techniques have brought new requirements for engineers in enterprises, and therefore brought a challenge to the traditional teaching system of mechanical major courses. ...The changes of design methods and manufacturing techniques have brought new requirements for engineers in enterprises, and therefore brought a challenge to the traditional teaching system of mechanical major courses. A new teaching system based on three-dimensional design to cultivate modern engineers with solid specialty bases and high creativity in a wide range of fields is presented.展开更多
An aerodynamic design criterion was discussed for the 1+3/2 counter-rotating turbine by analyzing the velocity triangles.There are 8 key aerodynamic parameters in the criterion,based on the consideration of aerodynami...An aerodynamic design criterion was discussed for the 1+3/2 counter-rotating turbine by analyzing the velocity triangles.There are 8 key aerodynamic parameters in the criterion,based on the consideration of aerodynamic efficiency and some strength requirements.Then,an aerodynamic design for the 1+3/2 counter-rotating turbine was made according to the criterion,and a three-dimensional simulation was conducted for it.Finally,the conclusions were obtained.The criterion containing 8 key aerodynamic parameters is verified rationally and the efficiency of the turbine reaches 91%.The aerodynamic characteristics of 1+3/2 counter-rotating turbine are mainly decided by the load coefficient,and due to an optimal power distribution coefficient of the low pressure turbine,the efficiency of the low pressure turbine can be best.展开更多
This study describes an ultrasonic velocity profiler that uses a <span style="white-space:normal;"><span style="font-family:;" "="">new ultrasonic array transducer with u...This study describes an ultrasonic velocity profiler that uses a <span style="white-space:normal;"><span style="font-family:;" "="">new ultrasonic array transducer with unique 5-element configuration</span></span><span style="white-space:normal;"><span style="font-family:;" "="">, with all five elements acting as transmitters and four elements as receivers. The receivers are designed to reduce the amount of uncertainty. As the fluid moves through this setup, four Doppler frequencies are obtained. The multi-dimensional velocity information along the measurement line can be reconstructed. The transducer has a compact geometry suitable for a wide range of applications, including narrow flow areas. The transducer’s basic frequency and sound pressure are selected and evaluated to be compatible with the application. First, to confirm the measurement ability, the measurement of the developed system in two-dimensional flow is validated by comparing it to the theoretical data. The uncertainty of measurement was within 15%. Second, the three-dimensional measurement in turbulent and swirling flow is proved experimentally to check the applicability of the proposed technique.</span></span>展开更多
基金supported by the National Natural Science Foundation of China (Grant Nos. 60725415 and 60676009)the Natural Science and Technology Major Project of the Ministry of Science and Technology of China (Grant No. 2009ZX01034-002-001-005)
文摘Based on a stochastic wire length distributed model, the interconnect distribution of a three-dimensional integrated circuit （3D IC） is predicted exactly. Using the results of this model, a global interconnect design window for a giga-scale system-on-chip （SOC） is established by evaluating the constraints of 1） wiring resource, 2） wiring bandwidth, and 3） wiring noise. In comparison to a two-dimensional integrated circuit （2D IC） in a 130-nm and 45-nm technology node, the design window expands for a 3D IC to improve the design reliability and system performance, further supporting 3D IC application in future integrated circuit design.
基金Sponsored by the National Natural Science Foundation of China (Grant No. 61005060)
文摘Although the shape-based method has been proven to be useful for low-thrust trajectory design,and be capable to provide near-optimal solution for a more accurate trajectory optimization method,it is slightly non-effective when used in some 3D cases.In this paper,a modified 3D shape-based method is proposed for earth trajectory design.In this approach,in consideration of the sinusoidal periodic variation in z direction of actual trajectory,a new exponential sinusoid model is chosen for the out-of-plane motion,with four coefficients such that four scalar out-of-plane boundary conditions can be satisfied.After deriving the 3D shape-based procedure,low-thrust trajectory design example with modest inclination change is given.The results demonstrate that this modified approach is feasible for the transfer trajectory design,and comparing to the former shape-based method,the z direction solution is more coincident with the actual situation,furthermore,the solution may be used for further mission planning,trajectory evaluation and optimization.
基金supported by Supported by National Natural Science Fund(U1704156)
文摘With the reduction of urban land, the three-dimensional garage is increasingly built with its advantages of saving land. But the current three-dimensional garage is built for the car. It is hardly stereo parking garage for electric bicycles. This paper designed a hollow tower electric bicycle stereo parking garage with fork comb structure, based on the analysis of the characteristics of electric bicycles and the characteristics of existing three-dimensional garages. A fixed comb is mounted on the garage frame. The movable comb is mounted on the middle lift mechanism of the garage. The access of the vehicle is achieved by the exchange of the comb. The key comb structure was modeled using SolidWorks software and the stress distribution of the structure was analyzed. It was optimized by MATLAB software. The result shows that this structure can improve access efficiency. The quality of the comb structure can be minimized under the constraints of strength requirements.
文摘The changes of design methods and manufacturing techniques have brought new requirements for engineers in enterprises, and therefore brought a challenge to the traditional teaching system of mechanical major courses. A new teaching system based on three-dimensional design to cultivate modern engineers with solid specialty bases and high creativity in a wide range of fields is presented.
文摘An aerodynamic design criterion was discussed for the 1+3/2 counter-rotating turbine by analyzing the velocity triangles.There are 8 key aerodynamic parameters in the criterion,based on the consideration of aerodynamic efficiency and some strength requirements.Then,an aerodynamic design for the 1+3/2 counter-rotating turbine was made according to the criterion,and a three-dimensional simulation was conducted for it.Finally,the conclusions were obtained.The criterion containing 8 key aerodynamic parameters is verified rationally and the efficiency of the turbine reaches 91%.The aerodynamic characteristics of 1+3/2 counter-rotating turbine are mainly decided by the load coefficient,and due to an optimal power distribution coefficient of the low pressure turbine,the efficiency of the low pressure turbine can be best.
文摘This study describes an ultrasonic velocity profiler that uses a <span style="white-space:normal;"><span style="font-family:;" "="">new ultrasonic array transducer with unique 5-element configuration</span></span><span style="white-space:normal;"><span style="font-family:;" "="">, with all five elements acting as transmitters and four elements as receivers. The receivers are designed to reduce the amount of uncertainty. As the fluid moves through this setup, four Doppler frequencies are obtained. The multi-dimensional velocity information along the measurement line can be reconstructed. The transducer has a compact geometry suitable for a wide range of applications, including narrow flow areas. The transducer’s basic frequency and sound pressure are selected and evaluated to be compatible with the application. First, to confirm the measurement ability, the measurement of the developed system in two-dimensional flow is validated by comparing it to the theoretical data. The uncertainty of measurement was within 15%. Second, the three-dimensional measurement in turbulent and swirling flow is proved experimentally to check the applicability of the proposed technique.</span></span>
