Characteristics of heat transfer and flow of Newtonian and non-Newtonian fluids through porous walls and in porous media are studied due to their wide range of applications including geothermal reservoirs,heat exchang...Characteristics of heat transfer and flow of Newtonian and non-Newtonian fluids through porous walls and in porous media are studied due to their wide range of applications including geothermal reservoirs,heat exchangers,marine propulsion,and aerodynamics.The current study investigates the characteristics of heat transport in a reactive third-grade fluid,moving through permeable parallel plates,with uniform suction/injection velocity.The two permeable,parallel plates are maintained at the same,constant temperature.After being transformed into its dimensionless equivalent,governing equations are solved by employing the Least Squares Method(LSM).The LSM results are further validated with numerical solutions for temperature and velocity.The impact of cross-flow Reynolds number,Peclet number,heat generation parameter,non-Newtonian parameter,and Brinkman number on entropy generation,velocity,temperature,and Bejan number are investigated.Theresults indicate that temperature distribution is significantly influenced by the third-grade fluid parameter.The maximum temperature drops from almost 0.12 to 0.10 as the third-grade fluid parameter increases from0.05 to 0.4.When the cross-flow Reynolds number is raised from 0.05 to 3,the maximum temperature drops from 0.12 to around 0.09.Temperature is strongly influenced by the heat generation parameter.A greater understanding of the thermal characteristics necessary for the design of a variety of systems,such as heat exchangers,marine propulsion,aerodynamic systems,etc.,may be gained from the findings of the current study.展开更多
The Cattaneo-Christov heat flux in the two-dimensional （2D） flow of a third- grade fluid towards an exponentially stretching sheet is investigated. The energy equation is considered through thermal relaxation. Simil...The Cattaneo-Christov heat flux in the two-dimensional （2D） flow of a third- grade fluid towards an exponentially stretching sheet is investigated. The energy equation is considered through thermal relaxation. Similarity transformations are accounted to obtain the ordinary differential systems. The converted non-dimensional equations are solved for the series solutions. The convergence analysis of the computed solutions is reported. The graphical results of the velocity and temperature profiles are plotted and elaborated in detail. The results show that the thermal relaxation enhances the temper- ature gradient while reduces the temperature profile.展开更多
This study is devoted to the investigation of thermal criticality for a reactive gravity driven thin film flow of a third-grade fluid with adiabatic free surface down an inclined isothermal plane. It is assumed that t...This study is devoted to the investigation of thermal criticality for a reactive gravity driven thin film flow of a third-grade fluid with adiabatic free surface down an inclined isothermal plane. It is assumed that the reaction is exothermic under Arrhenius kinetics, neglecting the consumption of the material. The governing non-linear equations for conservation of momentum and energy are obtained and solved by using a new computational approach based on a special type of Hermite-Padé approximation technique implemented in MAPLE. This semi-numerical scheme offers some advantages over solutions obtained with traditional methods such as finite differences, spectral method, and shooting method. It reveals the analytical structure of the solution function. Important properties of overall flow structure including velocity field, temperature field, thermal criticality, and bifurcations are discussed.展开更多
The well-known problem of unidirectional plane flow of a fluid in a non-porous half-space due to the impulsive motion of the rigid plane wall it rests upon is discussed in the context of an unsteady MHD third-grade fl...The well-known problem of unidirectional plane flow of a fluid in a non-porous half-space due to the impulsive motion of the rigid plane wall it rests upon is discussed in the context of an unsteady MHD third-grade fluid in presence of Hall currents. The governing non-linear partial differential equations describing the problem are converted to a system of non-linear ordinary differential equations by using the similarity transformations. The complex analytical solution is found by using the homotopy analysis method (HAM). The existing literature on the topic shows that it is the first study regarding the effects of Hall current on flow of an unsteady MHD third-grade fluid over an impulsively moving plane wall. The convergence of the obtained complex series solutions is carefully analyzed. The effects of dimensionless parameters on the velocity are illustrated through plots and the effects of the pertinent parameters on the local skin friction coefficient at the surface of the wall are presented numerically in tabular form.展开更多
Neglecting the consumption of the material, a steady incompressible flow of an exothermic reacting third-grade fluid with viscous heating in a circular cylindrical pipe is numerically studied for both cases of constan...Neglecting the consumption of the material, a steady incompressible flow of an exothermic reacting third-grade fluid with viscous heating in a circular cylindrical pipe is numerically studied for both cases of constant viscosity and Reynolds＇ viscosity model. The coupled ordinary differential equations governing the flow in cylindrical coordinates, are transformed into dimensionless forms using appropriate transformations, and then solved numerically. Solutions using Maple are presented in tabular form and given in terms of dimensionless central fluid velocity and temperature, skin friction and heat transfer rate for three parametric values in the Reynolds＇ case. The numerical results for the velocity and temperature fields are also presented through graphs. Bifurcations are discussed using shooting method. Comparisons are also made between the present results and those of previous work, and thus verify the validity of the provided numerical solutions. Important properties of thermal criticality are provided for variable viscosity parameter and reaction order. Further numerical results are presented in the form of tables and graphs for transition of physical parameters, while varying certain flow and fluid material parameters. Also, the flow behaviour of the reactive fluid of third-grade is compared with those of the Newtonian reactive fluid.展开更多
The present paper focuses on finding an analytical solution for fully developed third-grade non-Newtonian fluids flows inside rough circular pipes at low Reynolds numbers(Stokes flows).The wall roughness is modeled by...The present paper focuses on finding an analytical solution for fully developed third-grade non-Newtonian fluids flows inside rough circular pipes at low Reynolds numbers(Stokes flows).The wall roughness is modeled by two different periodic morphologies based on sinusoidal and triangular geometries.In this study,the relative roughness(ratio of the roughness amplitude to the pipe hydraulic diameter)is selected to be a small value,which is appropriate for the perturbation analysis.The governing parameters including the axial and radial velocity profiles,stream function,wall shear stress,pressure gradient,and friction factor are expressed in analytical formulas and they are compared to the smooth pipe.The effect of the relative roughness,the wall wave number,and the non-Newtonian parameter on the governing parameters are investigated.The results show that modeling the roughness by triangular geometry has a better prediction of pressure drop regarding the basic solution of the smooth pipe.展开更多
Rhegmatogenous retinal detachment(RRD)is a serious ocular condition marked by the separation of the neuroretina from the retinal pigment epithelium(RPE).The pathogenesis of RRD involves intricate molecular and cellula...Rhegmatogenous retinal detachment(RRD)is a serious ocular condition marked by the separation of the neuroretina from the retinal pigment epithelium(RPE).The pathogenesis of RRD involves intricate molecular and cellular mechanisms,including inflammation,cell migration,and the activation of proliferative signaling pathways.One of the most challenging complications of RRD is proliferative vitreoretinopathy(PVR),which refers to the proliferation and contraction of fibrocellular membranes on the retinal surface and in the vitreous cavity.PVR is a major cause of surgical failure in RRD,as it can lead to recurrent retinal detachment and severe vision loss.However,the pathogenesis of PVR is not yet fully understood,and the treatment options are quite limited.Recent advances in analytical techniques have offered valuable insights into the molecular alterations present in the subretinal fluid(SRF)of patients with RRD.This review seeks to consolidate the current knowledge regarding the SRF profile in RRD and PVR,emphasizing potential biomarkers and therapeutic targets.展开更多
The formation of copper deposits is closely related to hydrothermal processes.Understanding the migration of copper in hydrothermal fluids aids in reconstructing mineralization processes and deciphering deposit genesi...The formation of copper deposits is closely related to hydrothermal processes.Understanding the migration of copper in hydrothermal fluids aids in reconstructing mineralization processes and deciphering deposit genesis.Copper primarily exists as Cu^(+)and Cu^(2+)in hydrothermal solutions,with redox conditions governing their interconversion.In chloride-rich geological fluids,Cu-Cl complexes are considered critical for copper transport.However,the specific types and valence transitions of Cu-Cl complexes under varying hydrothermal conditions remain poorly understood.This study employed in situ Raman spectroscopy to systematically analyze Cu+HCl and CuCl_(2)+K_(2)S_(2)O_(3)/H_(2) systems under saturated vapor pressure at 25-300℃,elucidating the effects of temperature,Cl^(-)concentration,and redox conditions on copper speciation.In the Cu^(+)HCl system,copper dissolved as monovalent Cu-Cl complexes.At high temperatures(>200℃),[CuCl_(2)]^(-)is the dominated species,whereas[CuCl_(3)]^(2-)becomes prevalent at lower temperatures and higher HCl concentrations.For the Cu^(2+)-Cl system,the dominant species transitioned from[Cu(H_(2)O)n]^(2+)(<50℃)to[CuCl_(4)]^(2-)(100℃)and further to[CuCl]^(+)and[CuCl_(2)]^(0) at 300℃.The introduction of reducing agents(K_(2)S_(2)O_(3)/H_(2))facilitated Cu^(2+)→Cu^(+)reduction,thereby stabilizing Cu^(+)-Cl complexes and inducing partial copper precipitation.The behavior of copper in chloriderich hydrothermal fluids observed in this study indicates that high-temperature oxidizing fluids facilitate Cu mobilization,while cooling and redox changes promote deposition and ore minerals formation.展开更多
As a multidisciplinary phenomenon,panel aeroelasticity in shock-dominated flow is featured by two primary interactions:Fluid-Structure Interactions(FSIs)and Shock-Boundary Layer Interactions(SBLIs).The former raises s...As a multidisciplinary phenomenon,panel aeroelasticity in shock-dominated flow is featured by two primary interactions:Fluid-Structure Interactions(FSIs)and Shock-Boundary Layer Interactions(SBLIs).The former raises structural concerns,and the latter is of aerodynamic interest.Thus,panel aeroelasticity in shock-dominated flow represents a vital topic for the development and optimization of supersonic vehicles and propulsion systems.This review systematically summarizes recent advances in the methodologies applied to capture structural and fluid dynamics,including theoretical models,numerical simulations,and wind tunnel experiments.The application of data-driven modal decomposition,an advanced technique to extract physically crucial features,on the topic is introduced.From the perspective of FSIs,the distinctive aeroelastic behaviors in shock-dominated flow,including hysteresis phenomena and nonlinear responses,are highlighted.From the perspective of SBLIs,the modifications in their spatial and temporal characteristics imposed by the aeroelastic responses are emphasized.Motivated by the interaction between the shock waves and structural response,different strategies have been proposed to implement aeroelastic suppression and shock control,which have the potential to enhance structural safety and aerodynamic performance in the next generation of high-speed flight vehicles.展开更多
When a porous rock is subjected to overall compressive loading,either increasing pore pressure or decreasing confining pressure could result in rock failure.The stress path and the applied pressure change rate may aff...When a porous rock is subjected to overall compressive loading,either increasing pore pressure or decreasing confining pressure could result in rock failure.The stress path and the applied pressure change rate may affect the initiation and propagation of fractures within brittle materials.Understanding the physical mechanisms leading to failure is crucial for underground engineering applications and geo-energy exploration and storage.We conducted triaxial compression experiments on porous Bentheim sandstone samples at different stress paths and pressure change rates.First,at a constant confining pressure of 35 MPa and pore pressure of 5 MPa,intact cylindrical samples were axially loaded up to about 85%of the peak strength.Subsequently,the axial piston position was fixed,and then either the pore pressure was increased or the confining pressure was decreased at two different rates(0.5 MPa/min or 2 MPa/min),leading to final catastrophic failure.The mechanical results revealed that samples subjected to higher rates of decreasing effective confining pressure exhibited larger stress drop rates,higher slip rates,higher total breakdown work,higher rates of acoustic emissions(AEs)before failure,and higher post-failure AE decay rates.In contrast,the applied stress path did not significantly affect rock failure characteristics.Comparison of located AE events with post-mortem microstructures of deformed samples shows a good agreement.The AE source type determined from the P-wave first-motion polarity shows that shear failure dominated the fracture process when approaching failure.Gutenberg-Richter b-values revealed a significant decrease before failure in all tests.Our results indicate that,in contrast to the stress path,the rate of effective stress change strongly affects fracturing behavior and AE rate changes.展开更多
The migration mechanisms of ore-forming fluids have long been a focus in the field of ore deposit studies.Calcite is ubiquitously present in various types of rocks in the lithosphere,and the underlying mechanisms of i...The migration mechanisms of ore-forming fluids have long been a focus in the field of ore deposit studies.Calcite is ubiquitously present in various types of rocks in the lithosphere,and the underlying mechanisms of its influence on fluid migration are of crucial importance.While previous studies have revealed that salinity changes can modulate fluid migration,the underlying mechanisms remain poorly understood.We employ molecular dynamics simulations to elucidate how salinity variations in ore-forming fluids modulate the adsorption onto calcite nanopore walls,thereby revealing the microscopic mechanisms governing ore fluid transport through calcite nano-fractures.The results show that the adsorption energy Eint of the solution on the calcite surface increased from -14,948.84±182.48 kcal/mol to -12,144.08±118.2 kcal/mol as salinity increased,which is conducive to the long-range transport of the fluid in the calcite nanopore.展开更多
The purpose of the present investigation is to explore the implications of Cross fluid in a Darcy-Forchheimer porousmediumdue to the tri-hybrid nanofluid past a porous cylinder.Thermal radiation,heat generation,therma...The purpose of the present investigation is to explore the implications of Cross fluid in a Darcy-Forchheimer porousmediumdue to the tri-hybrid nanofluid past a porous cylinder.Thermal radiation,heat generation,thermal convection,solutal convective and chemical reaction have been encountered in this analysis.Entropy generation has been accounted for under the fluidic friction,heat rate analysis,and porosity analysis.Three different nanoparticles of multiwall carbon nanotube(MWCNT),aluminum oxide(Al_(2)O_(3)),and silver(Ag)are utilized to illustrate the tri-hybrid nanofluid flow with Ethlene Glycol(EG)as the base fluid.The governance model,consisting of linked inadequate differential conditions,is transformed into an ordinary configuration of nonlinear coupled differential conditions by acceptable adjustments.The obtained outcomes in combination with the bvp4c approach are then used to resolve the generated ODEs.For discussion purposes,the impacts of the physical limitations on temperature profile,velocity,and concentration have also been illustrated.Numerical results have been obtained for the diffusion rate,heat transfer rate,drag force,and other factors.While the Forchheimer parameter and the inclination angle reduce the fluid flow’s velocity,the Biot number of heat and mass transfer influences the fluid’s temperature.According to the findings,hybrid nanofluid is the most effective way to improve heat transmission and may also be utilized for cooling.Three different kinds of nanofluids were used in a comparative examination to clarify the study’s conclusions.Changes in viscosity and porousness caused the nanofluids’velocity to drop by 13.12%and 15.8%,respectively;however,trihybrid nanofluids with improved convection showed a 13.12%rise.展开更多
While injection-induced seismicity has been widely studied,its implications for CO_(2)geological storage require reevaluation due to distinct fluid-rock interactions.This study develops a coupled hydromechanical model...While injection-induced seismicity has been widely studied,its implications for CO_(2)geological storage require reevaluation due to distinct fluid-rock interactions.This study develops a coupled hydromechanical model incorporating rate-and-state friction laws to investigate fault reactivation mechanisms during early-stage CO_(2)injection.The competing effects of pore pressure diffusion and fluid pressurization are systematically investigated,considering three key factors:permeability variations within fault damage zones,normal stress variation coefficients,and injection parameters.Numerical simulations reveal that slower CO_(2)migration causes limited pressure perturbation(<0.3 MPa over 15 d)compared to single-phase fluid injection.Fluid pressurization enhances fault strength and delays reactivation,though this stabilizing effect diminishes in low-permeability damage zones.Highly permeable damage zones promote larger rupture areas despite strengthening from pressurization,as reduced effective stress accelerates failure.Paradoxically,while fluid pressurization increases fault strength,it simultaneously elevates seismic risk through amplified stress drops during slip events.Temporal analysis shows that fluid pressurization dominates initial fault response,while sustained pore pressure diffusion ultimately drives reactivation.Increased normal stress variation coefficients and injection rates accelerate localized rupture initiation but restrict propagation due to non-critically stressed states.This discrepancy demonstrates that regions with positive Coulomb failure stress changes do not correlate well with actual slip zones.These findings highlight the critical interplay between transient pressurization effects and progressive pressure diffusion during early CO_(2)injection phases,providing crucial insights for seismic risk management in CO_(2)storage projects.展开更多
There is a need for accurate prediction of heat and mass transfer in aerodynamically designed,non-Newtonian nanofluids across aerodynamically designed,high-flux biomedical micro-devices for thermal management and reac...There is a need for accurate prediction of heat and mass transfer in aerodynamically designed,non-Newtonian nanofluids across aerodynamically designed,high-flux biomedical micro-devices for thermal management and reactive coating processes,but existing work is not uncharacteristically remiss regarding viscoelasticity,radiative heating,viscous dissipation,and homogeneous–heterogeneous reactions within a single scheme that is calibrated.This research investigates the flow of Williamson nanofluid across a dynamically wedged surface under conditions that include viscous dissipation,thermal radiation,and homogeneous-heterogeneous reactions.The paper develops a detailed mathematical approach that utilizes boundary layers to transform partial differential equations into ordinary differential equations using similarity transformations.RK4 is the technique for gaining numerical solutions,but with the addition of ANNs,there is an improvement in prediction accuracy and computational efficiency.The study investigates the influence of wedge angle parameter,along with Weissenberg number,thermal radiation parameter and Brownian motion parameter,and Schmidt number,on velocity distribution,temperature distribution,and concentra-tion distribution.Enhanced Weissenberg numbers enhance viscoelastic responses that modify velocity patterns,but radiation parameters and thermophoresis have key impacts on thermal transfer phenomena.This research develops findings that are of enormous application in aerospace,biomedical(artificial hearts and drug delivery),and industrial cooling technology applications.New findings on non-Newtonian nanofluids under full flow systems are included in this work to enhance heat transfer methods in novel fluid-based systems.展开更多
Detecting biomarkers in body fluids by optical lateral flow immune assay(LFIA) technology provides rapid access to disease information for early diagnosis.LFIA is based on an antigen-antibody reaction and is rapidly b...Detecting biomarkers in body fluids by optical lateral flow immune assay(LFIA) technology provides rapid access to disease information for early diagnosis.LFIA is based on an antigen-antibody reaction and is rapidly becoming the preferred choice of physicians and patients for point-of-care testing due to its simplicity,cost-effectiveness,and rapid detection.Observing the optical signal change from the colloidal gold of the traditional LFIA strip has been widely applied for various biomarkers detection in body fluids.Despite the significant progress,rapid real-time detection of color changes in the colloidal gold by the naked eye still faces many limitations,such as large errors and the inability to quantify and accurately detect.New optical LFIA strip technology has emerged in recent years to extend its application scenarios for achieving quantitative detection such as fluorescence,afterglow,and chemiluminescence.Herein,we summarized the development of optical LFIA technology from single to hyphenated optical signals for biomarkers detection in body fluids from invasive and non-invasive sources.Moreover,the challenge and outlook of optical LFIA strip technology are highlighted to inspire the designing of next-generation diagnostic platforms.展开更多
In the quest to enhance energy efficiency and reduce environmental impact in the transportation sector,the recovery of waste heat from diesel engines has become a critical area of focus.This study provided an exhausti...In the quest to enhance energy efficiency and reduce environmental impact in the transportation sector,the recovery of waste heat from diesel engines has become a critical area of focus.This study provided an exhaustive thermodynamic analysis optimizing Organic Rankine Cycle(ORC)systems forwaste heat recovery fromdiesel engines.Thestudy assessed the performance of five candidateworking fluids—R11,R123,R113,R245fa,and R141b—under a range of operating conditions,specifically varying overheat temperatures and evaporation pressures.The results indicated that the choice of working fluid substantially influences the system’s exergetic efficiency,net output power,and thermal efficiency.R245fa showed an outstanding net output power of 30.39 kW at high overheat conditions,outperforming R11,which is significant for high-temperature waste heat recovery.At lower temperatures,R11 and R113 demonstrated higher exergetic efficiencies,with R11 reaching a peak exergetic efficiency of 7.4%at an evaporation pressure of 10 bar and an overheat of 10℃.The study also revealed that controlling the overheat and optimizing the evaporation pressure are crucial for enhancing the net output power of the ORC system.Specifically,at an evaporation pressure of 30 bar and an overheat of 0℃,R113 exhibited the lowest exergetic destruction of 544.5 kJ/kg,making it a suitable choice for minimizing irreversible losses.These findings are instrumental for understanding the performance of ORC systems in waste heat recovery applications and offer valuable insights for the design and operation of more efficient and environmentally friendly diesel engine systems.展开更多
The airflow mechanics in adult nasal airways,whether healthy or abnormal,are extensively studied and investigated,but the flow mechanics in child nasal airways remain underexplored.This study investigates the airflow ...The airflow mechanics in adult nasal airways,whether healthy or abnormal,are extensively studied and investigated,but the flow mechanics in child nasal airways remain underexplored.This study investigates the airflow mechanics in the child’s nasal upper airway with adenoid hypertrophy,with an adenoid nasopharyngeal ratio(AN of 0.9),under cyclic inhalation and exhalation.An inlet respiratory cycle with three different flow rates(3.2 L/min calm breathing,8.6 L/min normal breathing,and 19.3 L/min intensive breathing)was simulated by using the computational fluid dynamics approach.To better capture the interaction between airflow and the flexible airway tissue,fluid-structure interaction analysis was performed at the normal breathing rate.Comparing the airflow dynamics during inhalation and exhalation,the pressure drops,nasal resistance,and wall shear stress show significant differences in the nasopharyngeal region for all different flow rates.This observation suggests that the inertial effect associated with the transient flow is important during exhalation and inhalation.Furthermore,the considerable temporal variation in flow rate distribution across a specific cross-section of the nasal airway highlights the critical role of transient data in virtual surgery planning and data for clinical decisions.展开更多
Supercritical fluids play a crucial role in material transport within Earth's deep interior.Investigating the pressure-dependent atomic structures and transport properties of such fluids is essential for understan...Supercritical fluids play a crucial role in material transport within Earth's deep interior.Investigating the pressure-dependent atomic structures and transport properties of such fluids is essential for understanding their petrological,chemical,and geophysical behaviors.In this study,we employed first-principles molecular dynamics simulations to explore the structures,self-diffusion coefficients(D),and viscosities(η)of supercritical NaAlSi_(3)O_(8)-H_(2)O fluids under conditions of 2000 K and 3-10 GPa,with water contents of 30 wt% and 50 wt%.Our calculations indicate that at a water content of 30 wt%,Q^(2) and Q^(3) exhibit a certain degree of positive and negative pressure dependence,respectively,while other Q^(n) species(n represents the number of bridging oxygens connected to Si/Al)show minimal changes.At a water content of 50 wt%,Q^(2) and Q^(0) exhibit a certain degree of positive and negative pressure dependence,respectively,while other Q^(n) species show minimal changes.At both water contents,Si-O-H and molecular water in the system exhibit negative pressure dependence,suggesting that the migration of supercritical fluids from deep to shallow regions is accompanied by the release of water.The self-diffusion coefficients in the supercritical NaAlSi_(3)O_(8)-H_(2)O fluid follow the order D_(Na)≈D_(H)>D_(O)>D_(Al)≈D_(Si),with an overall weak negative pressure dependence.By comparing the viscosities of anhydrous and hydrous silicate melts from previous studies,we found that the addition of water caused a transition from negative to positive pressure dependence of viscosity,corresponding to a structural change from polymerization to depolymerization.Additionally,we calculated the fluid mobility Δp/η of supercritical NaAlSi_(3)O_(8)-H_(2)O fluids and found that their mobility is several orders of magnitude higher than that of basalt melt and is also significantly greater than that of carbonate melt.As supercritical fluids ascend from deeper to shallower regions,their mobility is further enhanced,significantly contributing to the transport of elements from subducting slabs to the overlying mantle wedge.展开更多
With the efficient and intelligent development of computer-based big data processing,applying machine learning methods to the processing and interpretation of logging data in the field of geophysical well logging has ...With the efficient and intelligent development of computer-based big data processing,applying machine learning methods to the processing and interpretation of logging data in the field of geophysical well logging has broad potential for improving production efficiency.Currently,the Jiyuan Oilfield in the Ordos Basin relies mainly on manual reprocessing and interpretation of old well logging data to identify different fluid types in low-contrast reservoirs,guiding subsequent production work.This study uses well logging data from the Chang 1 reservoir,partitioning the dataset based on individual wells for model training and testing.A deep learning model for intelligent reservoir fluid identification was constructed by incorporating the focal loss function.Comparative validations with five other models,including logistic regression(LR),naive Bayes(NB),gradient boosting decision trees(GBDT),random forest(RF),and support vector machine(SVM),show that this model demonstrates superior identification performance and significantly improves the accuracy of identifying oil-bearing fluids.Mutual information analysis reveals the model's differential dependency on various logging parameters for reservoir fluid identification.This model provides important references and a basis for conducting regional studies and revisiting old wells,demonstrating practical value that can be widely applied.展开更多
In this paper, a non-Newtonian third-grade blood in coronary and femoral arteries is simulated analytically and numerically. The blood is considered as the third- grade non-Newtonian fluid under the periodic body acce...In this paper, a non-Newtonian third-grade blood in coronary and femoral arteries is simulated analytically and numerically. The blood is considered as the third- grade non-Newtonian fluid under the periodic body acceleration motion and the pulsatile pressure gradient. The hybrid multi-step differential transformation method （Hybrid-Ms- DTM） and the Crank-Nicholson method （CNM） are used to solve the partial differential equation （PDE）, and a good agreement between them is observed in the results. The effects of the some physical parameters such as the amplitude, the lead angle, and the body acceleration frequency on the velocity and shear stress profiles are considered. The results show that increasing the amplitude, Ag, and reducing the lead angle of body acceleration, 9, make higher velocity profiles on the center line of both arteries. Also, the maximum wall shear stress increases when Ag increases.展开更多
文摘Characteristics of heat transfer and flow of Newtonian and non-Newtonian fluids through porous walls and in porous media are studied due to their wide range of applications including geothermal reservoirs,heat exchangers,marine propulsion,and aerodynamics.The current study investigates the characteristics of heat transport in a reactive third-grade fluid,moving through permeable parallel plates,with uniform suction/injection velocity.The two permeable,parallel plates are maintained at the same,constant temperature.After being transformed into its dimensionless equivalent,governing equations are solved by employing the Least Squares Method(LSM).The LSM results are further validated with numerical solutions for temperature and velocity.The impact of cross-flow Reynolds number,Peclet number,heat generation parameter,non-Newtonian parameter,and Brinkman number on entropy generation,velocity,temperature,and Bejan number are investigated.Theresults indicate that temperature distribution is significantly influenced by the third-grade fluid parameter.The maximum temperature drops from almost 0.12 to 0.10 as the third-grade fluid parameter increases from0.05 to 0.4.When the cross-flow Reynolds number is raised from 0.05 to 3,the maximum temperature drops from 0.12 to around 0.09.Temperature is strongly influenced by the heat generation parameter.A greater understanding of the thermal characteristics necessary for the design of a variety of systems,such as heat exchangers,marine propulsion,aerodynamic systems,etc.,may be gained from the findings of the current study.
文摘The Cattaneo-Christov heat flux in the two-dimensional （2D） flow of a third- grade fluid towards an exponentially stretching sheet is investigated. The energy equation is considered through thermal relaxation. Similarity transformations are accounted to obtain the ordinary differential systems. The converted non-dimensional equations are solved for the series solutions. The convergence analysis of the computed solutions is reported. The graphical results of the velocity and temperature profiles are plotted and elaborated in detail. The results show that the thermal relaxation enhances the temper- ature gradient while reduces the temperature profile.
基金supported by the National Research Foundation of South Africa Thuthuka Programme
文摘This study is devoted to the investigation of thermal criticality for a reactive gravity driven thin film flow of a third-grade fluid with adiabatic free surface down an inclined isothermal plane. It is assumed that the reaction is exothermic under Arrhenius kinetics, neglecting the consumption of the material. The governing non-linear equations for conservation of momentum and energy are obtained and solved by using a new computational approach based on a special type of Hermite-Padé approximation technique implemented in MAPLE. This semi-numerical scheme offers some advantages over solutions obtained with traditional methods such as finite differences, spectral method, and shooting method. It reveals the analytical structure of the solution function. Important properties of overall flow structure including velocity field, temperature field, thermal criticality, and bifurcations are discussed.
文摘The well-known problem of unidirectional plane flow of a fluid in a non-porous half-space due to the impulsive motion of the rigid plane wall it rests upon is discussed in the context of an unsteady MHD third-grade fluid in presence of Hall currents. The governing non-linear partial differential equations describing the problem are converted to a system of non-linear ordinary differential equations by using the similarity transformations. The complex analytical solution is found by using the homotopy analysis method (HAM). The existing literature on the topic shows that it is the first study regarding the effects of Hall current on flow of an unsteady MHD third-grade fluid over an impulsively moving plane wall. The convergence of the obtained complex series solutions is carefully analyzed. The effects of dimensionless parameters on the velocity are illustrated through plots and the effects of the pertinent parameters on the local skin friction coefficient at the surface of the wall are presented numerically in tabular form.
基金supported by Pastor E. A. Adeboye endowed Professorial Chair and conducted at the Department of Mathematics, University of Lagos, Lagos, Nigeria while on leave from
文摘Neglecting the consumption of the material, a steady incompressible flow of an exothermic reacting third-grade fluid with viscous heating in a circular cylindrical pipe is numerically studied for both cases of constant viscosity and Reynolds＇ viscosity model. The coupled ordinary differential equations governing the flow in cylindrical coordinates, are transformed into dimensionless forms using appropriate transformations, and then solved numerically. Solutions using Maple are presented in tabular form and given in terms of dimensionless central fluid velocity and temperature, skin friction and heat transfer rate for three parametric values in the Reynolds＇ case. The numerical results for the velocity and temperature fields are also presented through graphs. Bifurcations are discussed using shooting method. Comparisons are also made between the present results and those of previous work, and thus verify the validity of the provided numerical solutions. Important properties of thermal criticality are provided for variable viscosity parameter and reaction order. Further numerical results are presented in the form of tables and graphs for transition of physical parameters, while varying certain flow and fluid material parameters. Also, the flow behaviour of the reactive fluid of third-grade is compared with those of the Newtonian reactive fluid.
文摘The present paper focuses on finding an analytical solution for fully developed third-grade non-Newtonian fluids flows inside rough circular pipes at low Reynolds numbers(Stokes flows).The wall roughness is modeled by two different periodic morphologies based on sinusoidal and triangular geometries.In this study,the relative roughness(ratio of the roughness amplitude to the pipe hydraulic diameter)is selected to be a small value,which is appropriate for the perturbation analysis.The governing parameters including the axial and radial velocity profiles,stream function,wall shear stress,pressure gradient,and friction factor are expressed in analytical formulas and they are compared to the smooth pipe.The effect of the relative roughness,the wall wave number,and the non-Newtonian parameter on the governing parameters are investigated.The results show that modeling the roughness by triangular geometry has a better prediction of pressure drop regarding the basic solution of the smooth pipe.
文摘Rhegmatogenous retinal detachment(RRD)is a serious ocular condition marked by the separation of the neuroretina from the retinal pigment epithelium(RPE).The pathogenesis of RRD involves intricate molecular and cellular mechanisms,including inflammation,cell migration,and the activation of proliferative signaling pathways.One of the most challenging complications of RRD is proliferative vitreoretinopathy(PVR),which refers to the proliferation and contraction of fibrocellular membranes on the retinal surface and in the vitreous cavity.PVR is a major cause of surgical failure in RRD,as it can lead to recurrent retinal detachment and severe vision loss.However,the pathogenesis of PVR is not yet fully understood,and the treatment options are quite limited.Recent advances in analytical techniques have offered valuable insights into the molecular alterations present in the subretinal fluid(SRF)of patients with RRD.This review seeks to consolidate the current knowledge regarding the SRF profile in RRD and PVR,emphasizing potential biomarkers and therapeutic targets.
基金jointly funded by the Strategic Priority Research Program of the Chinese Academy of Sciences(grant No.XDA0430301)the National Natural Science Foundation of China(grant Nos.42130109,41973059)。
文摘The formation of copper deposits is closely related to hydrothermal processes.Understanding the migration of copper in hydrothermal fluids aids in reconstructing mineralization processes and deciphering deposit genesis.Copper primarily exists as Cu^(+)and Cu^(2+)in hydrothermal solutions,with redox conditions governing their interconversion.In chloride-rich geological fluids,Cu-Cl complexes are considered critical for copper transport.However,the specific types and valence transitions of Cu-Cl complexes under varying hydrothermal conditions remain poorly understood.This study employed in situ Raman spectroscopy to systematically analyze Cu+HCl and CuCl_(2)+K_(2)S_(2)O_(3)/H_(2) systems under saturated vapor pressure at 25-300℃,elucidating the effects of temperature,Cl^(-)concentration,and redox conditions on copper speciation.In the Cu^(+)HCl system,copper dissolved as monovalent Cu-Cl complexes.At high temperatures(>200℃),[CuCl_(2)]^(-)is the dominated species,whereas[CuCl_(3)]^(2-)becomes prevalent at lower temperatures and higher HCl concentrations.For the Cu^(2+)-Cl system,the dominant species transitioned from[Cu(H_(2)O)n]^(2+)(<50℃)to[CuCl_(4)]^(2-)(100℃)and further to[CuCl]^(+)and[CuCl_(2)]^(0) at 300℃.The introduction of reducing agents(K_(2)S_(2)O_(3)/H_(2))facilitated Cu^(2+)→Cu^(+)reduction,thereby stabilizing Cu^(+)-Cl complexes and inducing partial copper precipitation.The behavior of copper in chloriderich hydrothermal fluids observed in this study indicates that high-temperature oxidizing fluids facilitate Cu mobilization,while cooling and redox changes promote deposition and ore minerals formation.
基金supported by the National Natural Science Foundation of China(No.12372233)the Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University,China(No.25GH01020005)the“111 Project”of China(No.B17037)。
文摘As a multidisciplinary phenomenon,panel aeroelasticity in shock-dominated flow is featured by two primary interactions:Fluid-Structure Interactions(FSIs)and Shock-Boundary Layer Interactions(SBLIs).The former raises structural concerns,and the latter is of aerodynamic interest.Thus,panel aeroelasticity in shock-dominated flow represents a vital topic for the development and optimization of supersonic vehicles and propulsion systems.This review systematically summarizes recent advances in the methodologies applied to capture structural and fluid dynamics,including theoretical models,numerical simulations,and wind tunnel experiments.The application of data-driven modal decomposition,an advanced technique to extract physically crucial features,on the topic is introduced.From the perspective of FSIs,the distinctive aeroelastic behaviors in shock-dominated flow,including hysteresis phenomena and nonlinear responses,are highlighted.From the perspective of SBLIs,the modifications in their spatial and temporal characteristics imposed by the aeroelastic responses are emphasized.Motivated by the interaction between the shock waves and structural response,different strategies have been proposed to implement aeroelastic suppression and shock control,which have the potential to enhance structural safety and aerodynamic performance in the next generation of high-speed flight vehicles.
文摘When a porous rock is subjected to overall compressive loading,either increasing pore pressure or decreasing confining pressure could result in rock failure.The stress path and the applied pressure change rate may affect the initiation and propagation of fractures within brittle materials.Understanding the physical mechanisms leading to failure is crucial for underground engineering applications and geo-energy exploration and storage.We conducted triaxial compression experiments on porous Bentheim sandstone samples at different stress paths and pressure change rates.First,at a constant confining pressure of 35 MPa and pore pressure of 5 MPa,intact cylindrical samples were axially loaded up to about 85%of the peak strength.Subsequently,the axial piston position was fixed,and then either the pore pressure was increased or the confining pressure was decreased at two different rates(0.5 MPa/min or 2 MPa/min),leading to final catastrophic failure.The mechanical results revealed that samples subjected to higher rates of decreasing effective confining pressure exhibited larger stress drop rates,higher slip rates,higher total breakdown work,higher rates of acoustic emissions(AEs)before failure,and higher post-failure AE decay rates.In contrast,the applied stress path did not significantly affect rock failure characteristics.Comparison of located AE events with post-mortem microstructures of deformed samples shows a good agreement.The AE source type determined from the P-wave first-motion polarity shows that shear failure dominated the fracture process when approaching failure.Gutenberg-Richter b-values revealed a significant decrease before failure in all tests.Our results indicate that,in contrast to the stress path,the rate of effective stress change strongly affects fracturing behavior and AE rate changes.
基金financed jointly by the National Major Science and Technology Special Project on Deep Earth Exploration(2024ZD1001701-5)the National Natural Science Foundation of China(42472127,42172086)+2 种基金the Yunnan Major Project of Basic Research(202401BN070001-002)Yunnan Mineral Resources Prediction and Evaluation Engineering Research Center(2011)Innovation Team Program of Kunming University of Science and Technology,Yunnan Province。
文摘The migration mechanisms of ore-forming fluids have long been a focus in the field of ore deposit studies.Calcite is ubiquitously present in various types of rocks in the lithosphere,and the underlying mechanisms of its influence on fluid migration are of crucial importance.While previous studies have revealed that salinity changes can modulate fluid migration,the underlying mechanisms remain poorly understood.We employ molecular dynamics simulations to elucidate how salinity variations in ore-forming fluids modulate the adsorption onto calcite nanopore walls,thereby revealing the microscopic mechanisms governing ore fluid transport through calcite nano-fractures.The results show that the adsorption energy Eint of the solution on the calcite surface increased from -14,948.84±182.48 kcal/mol to -12,144.08±118.2 kcal/mol as salinity increased,which is conducive to the long-range transport of the fluid in the calcite nanopore.
基金the research support through grants ANTARABANGSA(IRMG)-TEL-U/2025/FTKM/A00086.
文摘The purpose of the present investigation is to explore the implications of Cross fluid in a Darcy-Forchheimer porousmediumdue to the tri-hybrid nanofluid past a porous cylinder.Thermal radiation,heat generation,thermal convection,solutal convective and chemical reaction have been encountered in this analysis.Entropy generation has been accounted for under the fluidic friction,heat rate analysis,and porosity analysis.Three different nanoparticles of multiwall carbon nanotube(MWCNT),aluminum oxide(Al_(2)O_(3)),and silver(Ag)are utilized to illustrate the tri-hybrid nanofluid flow with Ethlene Glycol(EG)as the base fluid.The governance model,consisting of linked inadequate differential conditions,is transformed into an ordinary configuration of nonlinear coupled differential conditions by acceptable adjustments.The obtained outcomes in combination with the bvp4c approach are then used to resolve the generated ODEs.For discussion purposes,the impacts of the physical limitations on temperature profile,velocity,and concentration have also been illustrated.Numerical results have been obtained for the diffusion rate,heat transfer rate,drag force,and other factors.While the Forchheimer parameter and the inclination angle reduce the fluid flow’s velocity,the Biot number of heat and mass transfer influences the fluid’s temperature.According to the findings,hybrid nanofluid is the most effective way to improve heat transmission and may also be utilized for cooling.Three different kinds of nanofluids were used in a comparative examination to clarify the study’s conclusions.Changes in viscosity and porousness caused the nanofluids’velocity to drop by 13.12%and 15.8%,respectively;however,trihybrid nanofluids with improved convection showed a 13.12%rise.
基金funded by Joint Funds of the National Natural Science Foundation of China(Grant No.U23A20671)the Major Project of Inner Mongolia Science and Technology(Grant No.2021ZD0034)the Creative Groups of Natural Science Foundation of Hubei Province,China(Grant No.2021CFA030).
文摘While injection-induced seismicity has been widely studied,its implications for CO_(2)geological storage require reevaluation due to distinct fluid-rock interactions.This study develops a coupled hydromechanical model incorporating rate-and-state friction laws to investigate fault reactivation mechanisms during early-stage CO_(2)injection.The competing effects of pore pressure diffusion and fluid pressurization are systematically investigated,considering three key factors:permeability variations within fault damage zones,normal stress variation coefficients,and injection parameters.Numerical simulations reveal that slower CO_(2)migration causes limited pressure perturbation(<0.3 MPa over 15 d)compared to single-phase fluid injection.Fluid pressurization enhances fault strength and delays reactivation,though this stabilizing effect diminishes in low-permeability damage zones.Highly permeable damage zones promote larger rupture areas despite strengthening from pressurization,as reduced effective stress accelerates failure.Paradoxically,while fluid pressurization increases fault strength,it simultaneously elevates seismic risk through amplified stress drops during slip events.Temporal analysis shows that fluid pressurization dominates initial fault response,while sustained pore pressure diffusion ultimately drives reactivation.Increased normal stress variation coefficients and injection rates accelerate localized rupture initiation but restrict propagation due to non-critically stressed states.This discrepancy demonstrates that regions with positive Coulomb failure stress changes do not correlate well with actual slip zones.These findings highlight the critical interplay between transient pressurization effects and progressive pressure diffusion during early CO_(2)injection phases,providing crucial insights for seismic risk management in CO_(2)storage projects.
基金supported by the Korea Institute of Energy Technology Evaluation and Planning(KETEP)and the Ministry of Trade,Industry&Energy(MOTIE)of the Republic of Korea(No.RS-2025-02315209).
文摘There is a need for accurate prediction of heat and mass transfer in aerodynamically designed,non-Newtonian nanofluids across aerodynamically designed,high-flux biomedical micro-devices for thermal management and reactive coating processes,but existing work is not uncharacteristically remiss regarding viscoelasticity,radiative heating,viscous dissipation,and homogeneous–heterogeneous reactions within a single scheme that is calibrated.This research investigates the flow of Williamson nanofluid across a dynamically wedged surface under conditions that include viscous dissipation,thermal radiation,and homogeneous-heterogeneous reactions.The paper develops a detailed mathematical approach that utilizes boundary layers to transform partial differential equations into ordinary differential equations using similarity transformations.RK4 is the technique for gaining numerical solutions,but with the addition of ANNs,there is an improvement in prediction accuracy and computational efficiency.The study investigates the influence of wedge angle parameter,along with Weissenberg number,thermal radiation parameter and Brownian motion parameter,and Schmidt number,on velocity distribution,temperature distribution,and concentra-tion distribution.Enhanced Weissenberg numbers enhance viscoelastic responses that modify velocity patterns,but radiation parameters and thermophoresis have key impacts on thermal transfer phenomena.This research develops findings that are of enormous application in aerospace,biomedical(artificial hearts and drug delivery),and industrial cooling technology applications.New findings on non-Newtonian nanofluids under full flow systems are included in this work to enhance heat transfer methods in novel fluid-based systems.
基金supported by the National Natural Science Foundation of China (Nos.22234005,22494632,22404081)the Natural Science Foundation of Jiangsu Province (Nos.BK20222015,BK20240534)。
文摘Detecting biomarkers in body fluids by optical lateral flow immune assay(LFIA) technology provides rapid access to disease information for early diagnosis.LFIA is based on an antigen-antibody reaction and is rapidly becoming the preferred choice of physicians and patients for point-of-care testing due to its simplicity,cost-effectiveness,and rapid detection.Observing the optical signal change from the colloidal gold of the traditional LFIA strip has been widely applied for various biomarkers detection in body fluids.Despite the significant progress,rapid real-time detection of color changes in the colloidal gold by the naked eye still faces many limitations,such as large errors and the inability to quantify and accurately detect.New optical LFIA strip technology has emerged in recent years to extend its application scenarios for achieving quantitative detection such as fluorescence,afterglow,and chemiluminescence.Herein,we summarized the development of optical LFIA technology from single to hyphenated optical signals for biomarkers detection in body fluids from invasive and non-invasive sources.Moreover,the challenge and outlook of optical LFIA strip technology are highlighted to inspire the designing of next-generation diagnostic platforms.
基金funded by the Huaiyin Institute of Technology—Institute of Smart Energy.
文摘In the quest to enhance energy efficiency and reduce environmental impact in the transportation sector,the recovery of waste heat from diesel engines has become a critical area of focus.This study provided an exhaustive thermodynamic analysis optimizing Organic Rankine Cycle(ORC)systems forwaste heat recovery fromdiesel engines.Thestudy assessed the performance of five candidateworking fluids—R11,R123,R113,R245fa,and R141b—under a range of operating conditions,specifically varying overheat temperatures and evaporation pressures.The results indicated that the choice of working fluid substantially influences the system’s exergetic efficiency,net output power,and thermal efficiency.R245fa showed an outstanding net output power of 30.39 kW at high overheat conditions,outperforming R11,which is significant for high-temperature waste heat recovery.At lower temperatures,R11 and R113 demonstrated higher exergetic efficiencies,with R11 reaching a peak exergetic efficiency of 7.4%at an evaporation pressure of 10 bar and an overheat of 10℃.The study also revealed that controlling the overheat and optimizing the evaporation pressure are crucial for enhancing the net output power of the ORC system.Specifically,at an evaporation pressure of 30 bar and an overheat of 0℃,R113 exhibited the lowest exergetic destruction of 544.5 kJ/kg,making it a suitable choice for minimizing irreversible losses.These findings are instrumental for understanding the performance of ORC systems in waste heat recovery applications and offer valuable insights for the design and operation of more efficient and environmentally friendly diesel engine systems.
基金supported by the National Key Research and Development Program of China(Grant No.2022YFF0707601).
文摘The airflow mechanics in adult nasal airways,whether healthy or abnormal,are extensively studied and investigated,but the flow mechanics in child nasal airways remain underexplored.This study investigates the airflow mechanics in the child’s nasal upper airway with adenoid hypertrophy,with an adenoid nasopharyngeal ratio(AN of 0.9),under cyclic inhalation and exhalation.An inlet respiratory cycle with three different flow rates(3.2 L/min calm breathing,8.6 L/min normal breathing,and 19.3 L/min intensive breathing)was simulated by using the computational fluid dynamics approach.To better capture the interaction between airflow and the flexible airway tissue,fluid-structure interaction analysis was performed at the normal breathing rate.Comparing the airflow dynamics during inhalation and exhalation,the pressure drops,nasal resistance,and wall shear stress show significant differences in the nasopharyngeal region for all different flow rates.This observation suggests that the inertial effect associated with the transient flow is important during exhalation and inhalation.Furthermore,the considerable temporal variation in flow rate distribution across a specific cross-section of the nasal airway highlights the critical role of transient data in virtual surgery planning and data for clinical decisions.
基金funded by National Natural Science Foundation of China(42373033,Yicheng Sun)Fundamental Research Funds for the Central Universities(B240201111,Yicheng Sun)。
文摘Supercritical fluids play a crucial role in material transport within Earth's deep interior.Investigating the pressure-dependent atomic structures and transport properties of such fluids is essential for understanding their petrological,chemical,and geophysical behaviors.In this study,we employed first-principles molecular dynamics simulations to explore the structures,self-diffusion coefficients(D),and viscosities(η)of supercritical NaAlSi_(3)O_(8)-H_(2)O fluids under conditions of 2000 K and 3-10 GPa,with water contents of 30 wt% and 50 wt%.Our calculations indicate that at a water content of 30 wt%,Q^(2) and Q^(3) exhibit a certain degree of positive and negative pressure dependence,respectively,while other Q^(n) species(n represents the number of bridging oxygens connected to Si/Al)show minimal changes.At a water content of 50 wt%,Q^(2) and Q^(0) exhibit a certain degree of positive and negative pressure dependence,respectively,while other Q^(n) species show minimal changes.At both water contents,Si-O-H and molecular water in the system exhibit negative pressure dependence,suggesting that the migration of supercritical fluids from deep to shallow regions is accompanied by the release of water.The self-diffusion coefficients in the supercritical NaAlSi_(3)O_(8)-H_(2)O fluid follow the order D_(Na)≈D_(H)>D_(O)>D_(Al)≈D_(Si),with an overall weak negative pressure dependence.By comparing the viscosities of anhydrous and hydrous silicate melts from previous studies,we found that the addition of water caused a transition from negative to positive pressure dependence of viscosity,corresponding to a structural change from polymerization to depolymerization.Additionally,we calculated the fluid mobility Δp/η of supercritical NaAlSi_(3)O_(8)-H_(2)O fluids and found that their mobility is several orders of magnitude higher than that of basalt melt and is also significantly greater than that of carbonate melt.As supercritical fluids ascend from deeper to shallower regions,their mobility is further enhanced,significantly contributing to the transport of elements from subducting slabs to the overlying mantle wedge.
基金supported by a project of the Shaanxi Youth Science and Technology Star(2021KJXX-87)public welfare geological survey projects of Shaanxi Institute of Geologic Survey(20180301,201918 and 202103)。
文摘With the efficient and intelligent development of computer-based big data processing,applying machine learning methods to the processing and interpretation of logging data in the field of geophysical well logging has broad potential for improving production efficiency.Currently,the Jiyuan Oilfield in the Ordos Basin relies mainly on manual reprocessing and interpretation of old well logging data to identify different fluid types in low-contrast reservoirs,guiding subsequent production work.This study uses well logging data from the Chang 1 reservoir,partitioning the dataset based on individual wells for model training and testing.A deep learning model for intelligent reservoir fluid identification was constructed by incorporating the focal loss function.Comparative validations with five other models,including logistic regression(LR),naive Bayes(NB),gradient boosting decision trees(GBDT),random forest(RF),and support vector machine(SVM),show that this model demonstrates superior identification performance and significantly improves the accuracy of identifying oil-bearing fluids.Mutual information analysis reveals the model's differential dependency on various logging parameters for reservoir fluid identification.This model provides important references and a basis for conducting regional studies and revisiting old wells,demonstrating practical value that can be widely applied.
文摘In this paper, a non-Newtonian third-grade blood in coronary and femoral arteries is simulated analytically and numerically. The blood is considered as the third- grade non-Newtonian fluid under the periodic body acceleration motion and the pulsatile pressure gradient. The hybrid multi-step differential transformation method （Hybrid-Ms- DTM） and the Crank-Nicholson method （CNM） are used to solve the partial differential equation （PDE）, and a good agreement between them is observed in the results. The effects of the some physical parameters such as the amplitude, the lead angle, and the body acceleration frequency on the velocity and shear stress profiles are considered. The results show that increasing the amplitude, Ag, and reducing the lead angle of body acceleration, 9, make higher velocity profiles on the center line of both arteries. Also, the maximum wall shear stress increases when Ag increases.
