The human skull, composed of tabula extema, tabula intema, and a porous diploe sandwiched in between, is deformed with changing intracranial pressure （ICP）. Because the human skull＇s thickness is only 6 mm, it is s...The human skull, composed of tabula extema, tabula intema, and a porous diploe sandwiched in between, is deformed with changing intracranial pressure （ICP）. Because the human skull＇s thickness is only 6 mm, it is simplified as a thin-walled shell. The objective of this article is to analyze the strain of the thin-wailed shell by the stress-strain calculation of a human skull with changing ICP. Under the same loading conditions, using finite element analysis （FEA）, the strains of the human skull were calculated and the results were compared with the measurements of the simulative experiment in vitro. It is demonstrated that the strain of the thin-walled shell is totally measured by pasting the one-way strain foils on the exterior surface of the shell with suitable amendment for data. The amendment scope of the measured strain values of the thin-walled shell is from 13.04% to 22.22%.展开更多
Two gating systems namely stepped and tapered runners were used to cast strip samples with different thicknesses by CO2/silicate process using sand grain sizes of AFS 151 and 171. To assess the effect of mould coating...Two gating systems namely stepped and tapered runners were used to cast strip samples with different thicknesses by CO2/silicate process using sand grain sizes of AFS 151 and 171. To assess the effect of mould coating on the properties of thin wall ductile iron, half of the moulds were coated whilst the rest were not coated. Molten metal with the carbon equivalent of 4.29% was prepared and poured at 1 450 ℃. Microstructure of the specimens was analyzed by optical and scanning electron microscopes. Count, area fraction, roundness and diameter of the graphite nodules of the samples were measured by image analyzer. Brinell hardness and tensile tests of all the samples were also conducted. The results show that by using stepped runner gating system with uncoated and coarse sand mould, roundness and count of the graphite nodules decrease whereas diameter and area fraction increase. Although fine sand and coated mould cause longer distance of molten metal travel, hardness and strength of the samples decrease.展开更多
文摘The human skull, composed of tabula extema, tabula intema, and a porous diploe sandwiched in between, is deformed with changing intracranial pressure （ICP）. Because the human skull＇s thickness is only 6 mm, it is simplified as a thin-walled shell. The objective of this article is to analyze the strain of the thin-wailed shell by the stress-strain calculation of a human skull with changing ICP. Under the same loading conditions, using finite element analysis （FEA）, the strains of the human skull were calculated and the results were compared with the measurements of the simulative experiment in vitro. It is demonstrated that the strain of the thin-walled shell is totally measured by pasting the one-way strain foils on the exterior surface of the shell with suitable amendment for data. The amendment scope of the measured strain values of the thin-walled shell is from 13.04% to 22.22%.
文摘Two gating systems namely stepped and tapered runners were used to cast strip samples with different thicknesses by CO2/silicate process using sand grain sizes of AFS 151 and 171. To assess the effect of mould coating on the properties of thin wall ductile iron, half of the moulds were coated whilst the rest were not coated. Molten metal with the carbon equivalent of 4.29% was prepared and poured at 1 450 ℃. Microstructure of the specimens was analyzed by optical and scanning electron microscopes. Count, area fraction, roundness and diameter of the graphite nodules of the samples were measured by image analyzer. Brinell hardness and tensile tests of all the samples were also conducted. The results show that by using stepped runner gating system with uncoated and coarse sand mould, roundness and count of the graphite nodules decrease whereas diameter and area fraction increase. Although fine sand and coated mould cause longer distance of molten metal travel, hardness and strength of the samples decrease.
