[Objectives]To explore the methods for identifying pure honey.[Methods]Using 35 batches of Jiulongteng honey sourced from various production areas in Guangxi as the research subjects,this study investigated the chromo...[Objectives]To explore the methods for identifying pure honey.[Methods]Using 35 batches of Jiulongteng honey sourced from various production areas in Guangxi as the research subjects,this study investigated the chromogenic reactions of starch and dextrin,as well as the comparative study of thin-layer chromatography of oligosaccharides present in Jiulongteng honey.[Results]None of the 35 batches of Jiulongteng honey samples exhibited blue(indicating starch),green,or reddish-brown(indicating dextrin)coloration,suggesting that no adulterants such as artificially added starch,dextrin,or sugar were present in these samples.Furthermore,none of the 35 batches displayed additional spots below the corresponding positions of the control,indicating that the sugar composition was consistent with the oligosaccharide profile of natural honey.No components inconsistent with the oligosaccharide profile of natural honey were detected.Therefore,it can be concluded that the Jiulongteng honey samples in this experiment were pure and free from adulteration with starch,dextrin,or other sugar substances.[Conclusions]The method employed in this experiment is straightforward and quick to implement,effectively preventing adulterated honey from entering the market.It enhances the efficiency of quality control for Jiulongteng honey and promotes the healthy development of the Jiulongteng honey industry.展开更多
The effect of trace addition of 0.1wt%Y on the grain refinement and mechanical properties of Al-2.2Li-1.5Cu-0.5Mg-1Zn-0.2Zr-0.2Sc alloys at as-cast and heat-treated states was investigated.Results show that the additi...The effect of trace addition of 0.1wt%Y on the grain refinement and mechanical properties of Al-2.2Li-1.5Cu-0.5Mg-1Zn-0.2Zr-0.2Sc alloys at as-cast and heat-treated states was investigated.Results show that the addition of 0.1wt%Y into the Al-2.2Li-1.5Cu-0.5Mg-1Zn-0.2Zr-0.2Sc alloys can elevate the nucleation temperature of the Al_(3)(Sc,Zr)phase,leading to the preferential precipitation of the Al_(3)(Sc,Zr)phase and increasing the amount of Al_(3)(Sc,Zr)phase in the matrix.Al_(3)(Sc,Zr)phase can also act as a heterogeneous nucleation site in theα-Al matrix to promote nucleation and refine grains.The addition of element Y changes the precipitation phase characteristics at the grain boundaries in the as-cast alloy,which changes the distribution characteristics of secondary phases from initially continuous and coarse strip-like distribution at grain boundaries into the discontinuous dot-like and rod-like distribution.Besides,the size of secondary phases becomes smaller and their amount increases.Under the combined effects of grain refinement strengthening and precipitation strengthening,the Al-2.2Li-1.5Cu-0.5Mg-1Zn-0.2Zr-0.2Sc-0.1Y alloy after 175℃/10 h aging treatment achieves an ultimate tensile strength of 412 MPa and an elongation of 6.3%.Compared with those of the alloy without Y addition,the ultimate tensile strength and elongation of the added alloy increase by 16.1%and 53.7%,respectively.展开更多
In modern ZnO varistors,traditional aging mechanisms based on increased power consumption are no longer relevant due to reduced power consumption during DC aging.Prolonged exposure to both AC and DC voltages results i...In modern ZnO varistors,traditional aging mechanisms based on increased power consumption are no longer relevant due to reduced power consumption during DC aging.Prolonged exposure to both AC and DC voltages results in increased leakage current,decreased breakdown voltage,and lower nonlinearity,ultimately compromising their protective performance.To investigate the evolution in electrical properties during DC aging,this work developed a finite element model based on Voronoi networks and conducted accelerated aging tests on commercial varistors.Throughout the aging process,current-voltage characteristics and Schottky barrier parameters were measured and analyzed.The results indicate that when subjected to constant voltage,current flows through regions with larger grain sizes,forming discharge channels.As aging progresses,the current focus increases on these channels,leading to a decline in the varistor’s overall performance.Furthermore,analysis of the Schottky barrier parameters shows that the changes in electrical performance during aging are non-monotonic.These findings offer theoretical support for understanding the aging mechanisms and condition assessment of modern stable ZnO varistors.展开更多
The Martian core mainly contains iron,nickel and some light elements.However,controversies remain about the structure and chemical composition of the Martian core due to a lack of samples and marsquake data.Recently,t...The Martian core mainly contains iron,nickel and some light elements.However,controversies remain about the structure and chemical composition of the Martian core due to a lack of samples and marsquake data.Recently,the InSight lander collected long-term marsquake data,which improved the Martian interior structure model.B ased on the preliminary analysis of marsquake data,Mars has a molten liquid core with a radius of around 1700 km.As the Martian core has a smaller density and lower temperature than pure iron at corresponding pressure and temperature conditions,some light elements are introduced to reduce the density and liquidus temperature.With various methods for seismic analysis,in-situ high-pressure and high-temperature experiments,and first-principal calculations,the Martian core composition and evolution models have been updated in the past few years.Here,we review those studies on the light elements in the Martian core from four aspects including(1)high-temperature and high-pressure experiments,(2)marsquake data,(3)mineral physics model with molecular dynamics simulations and(4)cosmochemistry investigation.We discussed the effect of different light elements on the Martian core s density,sound velocity and liquidus temperature.Moreover,the review examines the varieties,abundances and forms of light elements in the Martian core.展开更多
The development of catalytic multicomponent reactions for constructing complex organic scaffolds from readily accessible commodity chemicals is a key pursuit in contemporary synthetic chemistry.Current methods for syn...The development of catalytic multicomponent reactions for constructing complex organic scaffolds from readily accessible commodity chemicals is a key pursuit in contemporary synthetic chemistry.Current methods for synthesizing thioesters primarily rely on the acylation of thiols,which produces substantial waste and requires malodorous,unstable sulfur sources.In this work,we introduce a photocatalyzed hydrogen transfer strategy that enables a three-component synthesis of thioesters using abundant primary alcohols,easily available alkenes and elemental sulfur under mild conditions.This protocol demonstrates broad applicability and high chemo-and regioselectivity for both primary alcohols and alkenes,highlighting the advantage and potential of photo-mediated hydrogen transfer in facilitating multicomponent reactions using primary alcohol and elemental sulfur feedstocks.展开更多
Carbonatite is a rare but highly prospective rock that plays a significant role as a source of critical metals,notably rare earth elements(REE)and niobium(Nb).The widespread occurrence of fluorine-bearing minerals(e.g...Carbonatite is a rare but highly prospective rock that plays a significant role as a source of critical metals,notably rare earth elements(REE)and niobium(Nb).The widespread occurrence of fluorine-bearing minerals(e.g.,fluorite,fluorapatite,and bastnäsite)in carbonatites indicates that their parent magmas are rich in fluorine.Nevertheless,the mechanisms by which fluorine controls REE and Nb mineralization remain unclear.Building on previous work,we systematically synthesize the regulatory role of fluorine in REE and Nb mineralization throughout the entire magmatic evolution of carbonatites.Our key findings are:(1)during partial melting,fluorine decreases the solidus of carbonated peridotite,thereby enhancing the generation and stability of carbonatitic melt.(2)In the mantle melting stage,it lowers the partition coefficients of REE and Nb between mantle minerals and melt,effectively promoting their extraction.(3)Throughout magmatic crystallization,fluorine significantly enriches REE and Nb in the residual melt.(4)During liquid immiscibility,fluorine exerts limited influence,as the partition behaviors of REE and Nb are primarily governed by structural differences between the conjugate melts.(5)In the hydrothermal stage,fluorine facilitates the mobilization,transport,and ultimate precipitation of REE-and Nb-bearing minerals,directly driving mineralization.The presented evidence implies that carbonatitic melts and fluoride-bearing minerals exert primary control over the spatial distribution and mineralization potential of REE and Nb.Future studies should focus on(1)clarifying how fluorine promotes REE and Nb enrichment in late-stage brine melts and(2)investigating its effect on the solubility and precipitation mechanisms of REE-and Nb-bearing minerals during the late stages of magma evolution.展开更多
The influence of varying levels of impurity elements on the hot corrosion resistance of the DD98M alloy in Na_(2)SO_(4)+NaCl salt at 950℃ was investigated.The results indicate that the corrosion resistance of the DD9...The influence of varying levels of impurity elements on the hot corrosion resistance of the DD98M alloy in Na_(2)SO_(4)+NaCl salt at 950℃ was investigated.The results indicate that the corrosion resistance of the DD98M alloy significantly decreases with an increase in impurity content,and the presence of nitrogen leads to an increase in alloy porosity.These porosities promote the rapid diffusion of molten salt and oxygen into the alloy,resulting in a bilateral diffusion of oxygen and sulfur,which leads to an accumulation of these elements at the oxide−matrix interface.This process contributes to the formation and propagation of interfacial cracks.A growth model was developed for hot corrosion products in alloys with varying impurity elements.展开更多
A new quadrilateral edge element method is proposed and analyzed for Maxwell equations.This proposed method is based on Duan-Liang quadrilateral element(Math.Comp.73(2004),pp.1–18).When applied to the eigenvalue prob...A new quadrilateral edge element method is proposed and analyzed for Maxwell equations.This proposed method is based on Duan-Liang quadrilateral element(Math.Comp.73(2004),pp.1–18).When applied to the eigenvalue problem,the method is spectral-correct and spurious-free.Stability and error estimates are obtained,including the interpolation error estimates and the error estimates between the finite element solution and the exact solution.The method is suitable for singular solution as well as smooth solution,and consequently,the method is valid for nonconvex domains which may have a number of reentrant corners.Of course,the method is suitable for arbitrary quadrilaterals(under the usual shape-regular condition).展开更多
The moving morphable component(MMC)topology optimization method,as a typical explicit topology optimization method,has been widely concerned.In the MMC topology optimization framework,the surrogate material model is m...The moving morphable component(MMC)topology optimization method,as a typical explicit topology optimization method,has been widely concerned.In the MMC topology optimization framework,the surrogate material model is mainly used for finite element analysis at present,and the effectiveness of the surrogate material model has been fully confirmed.However,there are some accuracy problems when dealing with boundary elements using the surrogate material model,which will affect the topology optimization results.In this study,a boundary element reconstruction(BER)model is proposed based on the surrogate material model under the MMC topology optimization framework to improve the accuracy of topology optimization.The proposed BER model can reconstruct the boundary elements by refining the local meshes and obtaining new nodes in boundary elements.Then the density of boundary elements is recalculated using the new node information,which is more accurate than the original model.Based on the new density of boundary elements,the material properties and volume information of the boundary elements are updated.Compared with other finite element analysis methods,the BER model is simple and feasible and can improve computational accuracy.Finally,the effectiveness and superiority of the proposed method are verified by comparing it with the optimization results of the original surrogate material model through several numerical examples.展开更多
On the stone-paved lanes of Songyang County that date back to ancient times,morning mist lingered as a faint fragrance of tea wafted from a century-old house.Inside,Yang Junjie,a tea maker born in the 1980s,worked def...On the stone-paved lanes of Songyang County that date back to ancient times,morning mist lingered as a faint fragrance of tea wafted from a century-old house.Inside,Yang Junjie,a tea maker born in the 1980s,worked deftly at the stove,his hands moving swiftly over the scorching iron wok as tender green tea leaves dance between his fingers.展开更多
In this paper,we propose a systematic approach for accelerating finite element-type methods by machine learning for the numerical solution of partial differential equations(PDEs).The main idea is to use a neural netwo...In this paper,we propose a systematic approach for accelerating finite element-type methods by machine learning for the numerical solution of partial differential equations(PDEs).The main idea is to use a neural network to learn the solution map of the PDEs and to do so in an element-wise fashion.This map takes input of the element geometry and the PDE’s parameters on that element,and gives output of two operators:(1)the in2out operator for inter-element communication,and(2)the in2sol operator(Green’s function)for element-wise solution recovery.A significant advantage of this approach is that,once trained,this network can be used for the numerical solution of the PDE for any domain geometry and any parameter distribution without retraining.Also,the training is significantly simpler since it is done on the element level instead on the entire domain.We call this approach element learning.This method is closely related to hybridizable discontinuous Galerkin(HDG)methods in the sense that the local solvers of HDG are replaced by machine learning approaches.Numerical tests are presented for an example PDE,the radiative transfer or radiation transport equation,in a variety of scenarios with idealized or realistic cloud fields,with smooth or sharp gradient in the cloud boundary transition.Under a fixed accuracy level of 10^(−3) in the relative L^(2) error,and polynomial degree p=6 in each element,we observe an approximately 5 to 10 times speed-up by element learning compared to a classical finite element-type method.展开更多
We report the results of the experiment on synthesizing ^(287,288)Mc isotopes (Z=115) using the fusionevaporation reaction ^(243)Am(^(48)Ca,4n,3n)^(287,288)Mc at the Spectrometer for Heavy Atoms and Nuclear Structure-...We report the results of the experiment on synthesizing ^(287,288)Mc isotopes (Z=115) using the fusionevaporation reaction ^(243)Am(^(48)Ca,4n,3n)^(287,288)Mc at the Spectrometer for Heavy Atoms and Nuclear Structure-2(SHANS2),a gas-filled recoil separator located at the China Accelerator Facility for Superheavy Elements(CAFE2).In total,20 decay chains are attributed to ^(288)Mc and 1 decay chain is assigned to ^(287)Mc.The measured oa-decay properties of ^(287,288)Mc as well as its descendants are consistent with the known data.No additional decay chains originating from the 2n or 5n reaction channels were detected.The excitation function of the ^(243)Am(^(48)Ca,3n)^(288)Mc reaction was measured at the cross-section level of picobarn,which indicates the promising capability for the study of heavy and superheavy nuclei at the facility.展开更多
This study presents and verifies a hybrid methodology for reliable determination of parameters in structural rheological models(Zener,Burgers,and Maxwell)describing the viscoelastic behavior of polyurethane specimens ...This study presents and verifies a hybrid methodology for reliable determination of parameters in structural rheological models(Zener,Burgers,and Maxwell)describing the viscoelastic behavior of polyurethane specimens manufactured using extrusion-based 3D printing.Through comprehensive testing,including cyclic compression at strain rates ranging from 0.12 to 120 mm/min(0%-15%strain)and creep/relaxation experiments(10%-30%strain),the lumped parameters were independently determined using both analytical and numerical solutions of the models’differential equations,followed by cross-verification in additional experiments.Numerical solutions for creep and relaxation problems were obtained using finite element analysis,with the three-parameter Mooney-Rivlin model and Prony series employed to simulate elastic and viscous stress components,respectively.Energy dissipation per cycle was quantified during cyclic compression tests.The results demonstrate that all three models adequately describe material behavior within the 0%-15%strain range across various strain rates.Comparative analysis revealed the Burgers model’s superior performance in characterizing creep and stress relaxation at low strain levels.While Zener and Burgers model parameters from uniaxial compression showed limited applicability for energy dissipation calculations,the generalized Maxwell model effectively captured viscoelastic properties across different strain rates.Notably,parameters derived from creep tests provided a more universal assessment of dissipative properties due to optimization based on characteristic curve regions.Both parameter sets described polyurethane’s elastic-hysteretic behavior with approximately 20%error,proving significantly more accurate than the linear strain-time dependence hypothesis.Finite element analysis(FEA)complemented numerical modeling by demonstrating that while the generalized Maxwell model effectively describes initial rapid stress-strain changes,FEA provides superior characterization of steady-state processes.This computational approach yields more physically representative results compared to simplified analytical solutions,despite certain limitations in transient analysis.展开更多
In this work,the Hierarchical Quadrature Element Method(HQEM)formulation of geometrically exact shells is proposed and applied for geometrically nonlinear analyses of both isotropic and laminated shells.The stress res...In this work,the Hierarchical Quadrature Element Method(HQEM)formulation of geometrically exact shells is proposed and applied for geometrically nonlinear analyses of both isotropic and laminated shells.The stress resultant formulation is developed within the HQEM framework,consequently significantly simplifying the computations of residual force and stiffness matrix.The present formulation inherently avoids shear and membrane locking,benefiting from its high-order approximation property.Furthermore,HQEM’s independent nodal distribution capability conveniently supports local p-refinement and flexibly facilitates mesh generation in various structural configurations through the combination of quadrilateral and triangular elements.Remarkably,in lateral buckling analysis,the HQEM outperforms the weak-form quadrilateral element(QEM)in accuracy with identical nodal degrees of freedom(three displacements and two rotations).Under high-load nonlinear response,the QEM exhibits a maximum relative deviation of approximately 9.5%from the reference,while the HQEM remains closely aligned with the benchmark results.In addition,for the cantilever beam under tip moment,HQEM produces virtually no out-of-plane deviation,compared to a slight deviation of 0.00001 with QEM,confirming its superior numerical reliability.In summary,the method demonstrates high accuracy,superior convergence,and robustness in handling large rotations and complex post-buckling behaviors across a series of benchmark problems.展开更多
Super-heavy oil is a significant unconventional energy source,and more than 30 years of research have shown that steam-assisted gravity drainage(SAGD)technology is suitable for thick super-heavy oil reservoirs.Recentl...Super-heavy oil is a significant unconventional energy source,and more than 30 years of research have shown that steam-assisted gravity drainage(SAGD)technology is suitable for thick super-heavy oil reservoirs.Recently,more and more thin-layer super-heavy oil reservoirs have been discovered in China,while their deep buried depth and serous heterogeneity make the existing SAGD technology difficult to apply,so it is urgent to improve the existing SAGD technology for the thin-layer super-heavy oil.To this end,this paper focuses on the enlightenment of field application in SAGD technology.Firstly,based on typical SAGD field projects,the development history of SAGD technology in the world was reviewed,and the influence of reservoir physical properties on the application of SAGD technology in thin-layer superheavy oil reservoirs was analyzed.Secondly,the well pattern,wellbore structure,pre-heating,artificial lift,and monitor technique of SAGD were detailed described,and their adjustment direction was expounded for the development of thin-layer super-heavy oil reservoirs.Lastly,the gas-and solventassistant SAGD were comprehensively evaluated,and their application potential in thin-layer superheavy oil reservoirs was studied.The research results can provide theoretical guidance for the application of SAGD technology in thin-layer super-heavy oil reservoirs.展开更多
In this study,a high performance thin-layer chromatography/single quadrupole mass spectrometry QDa(HPTLC-QDa)method for robust authentication of Ganoderma lucidum,a popular and valuable herbal medicine,has been develo...In this study,a high performance thin-layer chromatography/single quadrupole mass spectrometry QDa(HPTLC-QDa)method for robust authentication of Ganoderma lucidum,a popular and valuable herbal medicine,has been developed.This method is simple and practical,which allows direct generation of characteristic mass spectra from the HPTLC plates automatically with the application of in situ solvent desorption interface.The HPTLC silica gel plates were developed with toluene-ethyl formate-formic acid(5:5:0.2,V/V)and all bands were transferred to QDa system directly in situ using 80%methanol with 0.1%formic acid as desorption solvent.The acquired HPTLC-QDa spectra showed that luminous yellow band b3,containing ganoderic acid B/G/H and ganodeneric acid B,the major active components of Ganoderma,could be found only in G.lucidum and G.lucidum(Antler-shaped),but not in G.sinense and G.applanatum.Moreover,bands b13 and b14 with m/z 475/477 and m/z 475/491/495,respectively,could be detected in G.lucidum(Antler-shaped),but not in G.lucidum,thus allowing simple and robust authentication of G.lucidum with confused species.This method is proved to be simple,practical and reproducible,which can be extended to analyze other herbal medicines.展开更多
Since the adverse factors such as deficient penetration and long reaction time have restricted the complete microwave-used drying of municipal sludge, the microwave-induced drying is considered, which has advantages i...Since the adverse factors such as deficient penetration and long reaction time have restricted the complete microwave-used drying of municipal sludge, the microwave-induced drying is considered, which has advantages in such aspects. The investigation of the microwave-induced drying to uncover the mechanism bears great meaning for its development and utilization. The effects of temperature and microwave cracking in municipal sewage sludge drying characteristics are stud- ied through municipal sewage sludge drying experiment. Experiments shows that higher drying temperature would lead to a more acutely changing drying rate （DR）. The DR had increased from 0.005 g/（g.min） to 0.060 g/（g·min）, which was 12 times enlarged, while the temperature rose from 70℃ to 160 ℃. The higher the temperature was, the earlier the peak value of DR appeared. The experiments indicated that the temperature was the decisive factor affecting the DR. The microwave-induced sludge reached the highest DR at the moisture rate （MR） of 40%, with a 20% grade promotion compared with that of the original one. The molecular fracture caused by microwave radiation had obviously accelerated the drying process and the DR was rising in proportion to the microwave radiation dose. The diffusion coefficient had been calculated according to Fick＇s law. In com- parison to that of the original one, the diffusion coefficient of microwave-induced sludge was obviously enlarged more than two times. By fit examinations, Model Weibull was proven to be the most fit one for thermal thin-layer drying of municipal sludge. By means of Arrhenius equation, the obtained average activation energy of municipal sludge was 37.1 kJ/（mol·K）.展开更多
Based on the study of the distribution of intra-platform shoals and the characteristics of dolomite reservoirs in the Middle Permian Qixia Formation in the Gaoshiti–Moxi area of the Sichuan Basin,SW China,the control...Based on the study of the distribution of intra-platform shoals and the characteristics of dolomite reservoirs in the Middle Permian Qixia Formation in the Gaoshiti–Moxi area of the Sichuan Basin,SW China,the controlling factors of reservoir development were analyzed,and the formation model of“intra-platform shoal thin-layer dolomite reservoir”was established.The Qixia Formation is a regressive cycle from bottom to top,in which the first member(Qi1 Member)develops low-energy open sea microfacies,and the second member(Qi2 Member)evolves into intra-platform shoal and inter-shoal sea with decreases in sea level.The intra-platform shoal is mainly distributed near the top of two secondary shallowing cycles of the Qi2 Member.The most important reservoir rock of the Qixia Formation is thin-layer fractured-vuggy dolomite,followed by vuggy dolomite.The semi-filled saddle dolomite is common in fracture-vug,and intercrystalline pores and residual dissolution pores combined with fractures to form the effective pore-fracture network.Based on the coupling analysis of sedimentary and diagenesis characteristics,the reservoir formation model of“pre-depositional micro-paleogeomorphology controlling shoal,sedimentary shoal controlling dolomite,penecontemporaneous dolomite benefiting preservation of pores,and late hydrothermal action effectively improving reservoir quality”was systematically established.The“first-order high zone”micro-paleogeomorphology before the deposition of the Qixia Formation controlled the development of large area of intra-platform shoals in Gaoshiti area during the deposition of the Qi2 Member.Shoal facies is the basic condition of early dolomitization,and the distribution range of intra-platform shoal and dolomite reservoir is highly consistent.The grain limestone of shoal facies is transformed by two stages of dolomitization.The penecontemporaneous dolomitization is conducive to the preservation of primary pores and secondary dissolved pores.The burial hydrothermal fluid enters the early dolomite body along the fractures associated with the Emeishan basalt event,makes it recrystallized into medium–coarse crystal dolomite.With the intercrystalline pores and the residual vugs after the hydrothermal dissolution along the fractures,the high-quality intra-platform shoal-type thin-layer dolomite reservoirs are formed.The establishment of this reservoir formation model can provide important theoretical support for the sustainable development of Permian gas reservoirs in the Sichuan Basin.展开更多
Bioreactive thin-layer capping（BTC）with biozeolite provides a potential remediation design that can sustainably treat N contamination from sediment and overlying water in eutrophic water bodies.Nitrogen（N）reductio...Bioreactive thin-layer capping（BTC）with biozeolite provides a potential remediation design that can sustainably treat N contamination from sediment and overlying water in eutrophic water bodies.Nitrogen（N）reduction using BTC with biozeolite was examined in a field incubation experiment in a eutrophic river in Yangzhou,Jiangsu Province,China.The biozeolite was zeolite with attached bacteria,including two isolated heterotrophic nitrifiers（Bacillus spp.）and two isolated aerobic denitrifiers（Acinetobacter spp.）.The results showed that the total nitrogen（TN）reduction efficiency of the overlying water by BTC with biozeolite（with thickness of about 2 mm）reached a maximum（56.69%）at day 34,and simultaneous heterotrophic nitrification and aerobic denitrification occurred in the BTC system until day 34.There was a significant difference in the TN concentrations of the overlying water between biozeolite capping and control（t-test;p〈0.05）.The biozeolite had very strong in situ bioregeneration ability.Carbon was the main source of nitrifier growth.However,both dissolved oxygen（DO）and carbon concentrations affected denitrifier growth.In particular,DO concentrations greater than 3 mg/L inhibited denitrifier growth.Therefore,BTC with biozeolite was found to be a feasible technique to reduce N in a eutrophic river.However,it is necessary to further strengthen the adaptability of aerobic denitrifiers through changing domestication methods or conditions.展开更多
The construction and characteristics of a microscale long-optical-path electrochemi- cal cell with a plug-in thin-layer electrode are described.Using ferricyanide as the test species,the thermodynamic parameters of el...The construction and characteristics of a microscale long-optical-path electrochemi- cal cell with a plug-in thin-layer electrode are described.Using ferricyanide as the test species,the thermodynamic parameters of electron transfer processes are determined at car- bon,plantinum,and gold electrodes.展开更多
基金Supported by Enhancement Project of Basic Scientific Research Ability of Young and Middle-aged Teachers in Guangxi Universities(2020KY07040)School-level Scientific Research Project of Guangxi University of Chinese Medicine(2024QN022)Self-financed Scientific Research Project of Guangxi Zhuang Autonomous Region Administration of Traditional Chinese Medicine(GXZYL20240818).
文摘[Objectives]To explore the methods for identifying pure honey.[Methods]Using 35 batches of Jiulongteng honey sourced from various production areas in Guangxi as the research subjects,this study investigated the chromogenic reactions of starch and dextrin,as well as the comparative study of thin-layer chromatography of oligosaccharides present in Jiulongteng honey.[Results]None of the 35 batches of Jiulongteng honey samples exhibited blue(indicating starch),green,or reddish-brown(indicating dextrin)coloration,suggesting that no adulterants such as artificially added starch,dextrin,or sugar were present in these samples.Furthermore,none of the 35 batches displayed additional spots below the corresponding positions of the control,indicating that the sugar composition was consistent with the oligosaccharide profile of natural honey.No components inconsistent with the oligosaccharide profile of natural honey were detected.Therefore,it can be concluded that the Jiulongteng honey samples in this experiment were pure and free from adulteration with starch,dextrin,or other sugar substances.[Conclusions]The method employed in this experiment is straightforward and quick to implement,effectively preventing adulterated honey from entering the market.It enhances the efficiency of quality control for Jiulongteng honey and promotes the healthy development of the Jiulongteng honey industry.
基金National Natural Science Foundation of China(52071065)Fundamental Research Funds for the Central Universities(N2007007)+2 种基金Joint Fund of Henan Province Science and Technology R&D Program(N225200810040)High-Level Talent Research Start-Up Project Funding of Henan Academy of Sciences(N242017003)Liaoning Provincial Department of Education Basic Research Projects for Colleges and Universities(LJ212410142093)。
文摘The effect of trace addition of 0.1wt%Y on the grain refinement and mechanical properties of Al-2.2Li-1.5Cu-0.5Mg-1Zn-0.2Zr-0.2Sc alloys at as-cast and heat-treated states was investigated.Results show that the addition of 0.1wt%Y into the Al-2.2Li-1.5Cu-0.5Mg-1Zn-0.2Zr-0.2Sc alloys can elevate the nucleation temperature of the Al_(3)(Sc,Zr)phase,leading to the preferential precipitation of the Al_(3)(Sc,Zr)phase and increasing the amount of Al_(3)(Sc,Zr)phase in the matrix.Al_(3)(Sc,Zr)phase can also act as a heterogeneous nucleation site in theα-Al matrix to promote nucleation and refine grains.The addition of element Y changes the precipitation phase characteristics at the grain boundaries in the as-cast alloy,which changes the distribution characteristics of secondary phases from initially continuous and coarse strip-like distribution at grain boundaries into the discontinuous dot-like and rod-like distribution.Besides,the size of secondary phases becomes smaller and their amount increases.Under the combined effects of grain refinement strengthening and precipitation strengthening,the Al-2.2Li-1.5Cu-0.5Mg-1Zn-0.2Zr-0.2Sc-0.1Y alloy after 175℃/10 h aging treatment achieves an ultimate tensile strength of 412 MPa and an elongation of 6.3%.Compared with those of the alloy without Y addition,the ultimate tensile strength and elongation of the added alloy increase by 16.1%and 53.7%,respectively.
文摘In modern ZnO varistors,traditional aging mechanisms based on increased power consumption are no longer relevant due to reduced power consumption during DC aging.Prolonged exposure to both AC and DC voltages results in increased leakage current,decreased breakdown voltage,and lower nonlinearity,ultimately compromising their protective performance.To investigate the evolution in electrical properties during DC aging,this work developed a finite element model based on Voronoi networks and conducted accelerated aging tests on commercial varistors.Throughout the aging process,current-voltage characteristics and Schottky barrier parameters were measured and analyzed.The results indicate that when subjected to constant voltage,current flows through regions with larger grain sizes,forming discharge channels.As aging progresses,the current focus increases on these channels,leading to a decline in the varistor’s overall performance.Furthermore,analysis of the Schottky barrier parameters shows that the changes in electrical performance during aging are non-monotonic.These findings offer theoretical support for understanding the aging mechanisms and condition assessment of modern stable ZnO varistors.
基金financially supported by the National Natural Science Foundation of China(grant no.42120104005)Guizhou Provincial 2021 Science and Technology Subsidies(grant no.GZ2021SIG)+1 种基金Guizhou Provincial Science and Technology Projects(grant nos.ZK[2024]087GCC[2023]060)。
文摘The Martian core mainly contains iron,nickel and some light elements.However,controversies remain about the structure and chemical composition of the Martian core due to a lack of samples and marsquake data.Recently,the InSight lander collected long-term marsquake data,which improved the Martian interior structure model.B ased on the preliminary analysis of marsquake data,Mars has a molten liquid core with a radius of around 1700 km.As the Martian core has a smaller density and lower temperature than pure iron at corresponding pressure and temperature conditions,some light elements are introduced to reduce the density and liquidus temperature.With various methods for seismic analysis,in-situ high-pressure and high-temperature experiments,and first-principal calculations,the Martian core composition and evolution models have been updated in the past few years.Here,we review those studies on the light elements in the Martian core from four aspects including(1)high-temperature and high-pressure experiments,(2)marsquake data,(3)mineral physics model with molecular dynamics simulations and(4)cosmochemistry investigation.We discussed the effect of different light elements on the Martian core s density,sound velocity and liquidus temperature.Moreover,the review examines the varieties,abundances and forms of light elements in the Martian core.
基金National Natural Science Foundation of China (Nos.22071185 and 22271224)the Fundamental Research Funds for the Central Universities (No.2042019kf0008)Wuhan University startup funding for financial support。
文摘The development of catalytic multicomponent reactions for constructing complex organic scaffolds from readily accessible commodity chemicals is a key pursuit in contemporary synthetic chemistry.Current methods for synthesizing thioesters primarily rely on the acylation of thiols,which produces substantial waste and requires malodorous,unstable sulfur sources.In this work,we introduce a photocatalyzed hydrogen transfer strategy that enables a three-component synthesis of thioesters using abundant primary alcohols,easily available alkenes and elemental sulfur under mild conditions.This protocol demonstrates broad applicability and high chemo-and regioselectivity for both primary alcohols and alkenes,highlighting the advantage and potential of photo-mediated hydrogen transfer in facilitating multicomponent reactions using primary alcohol and elemental sulfur feedstocks.
基金supported by the Guangdong S&T Program(Grant No.2024B0303390002)the National Natural Science Foundation of China(Grant Nos.42173024,92162106)+2 种基金the National Key Research and Development Program of China(Grant No.2021YFC2901705)the Director’s Fund of Guangzhou Institute of Geochemistry,Chinese Academy of Sciences(Grant No.2022SZJJZD-02)the East China University of Technology Graduate Student Innovation Grant(Grant No.YC2025-B156).
文摘Carbonatite is a rare but highly prospective rock that plays a significant role as a source of critical metals,notably rare earth elements(REE)and niobium(Nb).The widespread occurrence of fluorine-bearing minerals(e.g.,fluorite,fluorapatite,and bastnäsite)in carbonatites indicates that their parent magmas are rich in fluorine.Nevertheless,the mechanisms by which fluorine controls REE and Nb mineralization remain unclear.Building on previous work,we systematically synthesize the regulatory role of fluorine in REE and Nb mineralization throughout the entire magmatic evolution of carbonatites.Our key findings are:(1)during partial melting,fluorine decreases the solidus of carbonated peridotite,thereby enhancing the generation and stability of carbonatitic melt.(2)In the mantle melting stage,it lowers the partition coefficients of REE and Nb between mantle minerals and melt,effectively promoting their extraction.(3)Throughout magmatic crystallization,fluorine significantly enriches REE and Nb in the residual melt.(4)During liquid immiscibility,fluorine exerts limited influence,as the partition behaviors of REE and Nb are primarily governed by structural differences between the conjugate melts.(5)In the hydrothermal stage,fluorine facilitates the mobilization,transport,and ultimate precipitation of REE-and Nb-bearing minerals,directly driving mineralization.The presented evidence implies that carbonatitic melts and fluoride-bearing minerals exert primary control over the spatial distribution and mineralization potential of REE and Nb.Future studies should focus on(1)clarifying how fluorine promotes REE and Nb enrichment in late-stage brine melts and(2)investigating its effect on the solubility and precipitation mechanisms of REE-and Nb-bearing minerals during the late stages of magma evolution.
基金financial support from the National Key Research and Development Project of China(No.2019YFA0705300)the National Natural Science Foundation of China(No.52004051)+1 种基金the Project of Zhongyuan Critical Metals Laboratory,China(No.GJJSGFYQ202321)the Fund for Priority Support of Research Projects by Returned Overseas Scholars in Henan Province,China。
文摘The influence of varying levels of impurity elements on the hot corrosion resistance of the DD98M alloy in Na_(2)SO_(4)+NaCl salt at 950℃ was investigated.The results indicate that the corrosion resistance of the DD98M alloy significantly decreases with an increase in impurity content,and the presence of nitrogen leads to an increase in alloy porosity.These porosities promote the rapid diffusion of molten salt and oxygen into the alloy,resulting in a bilateral diffusion of oxygen and sulfur,which leads to an accumulation of these elements at the oxide−matrix interface.This process contributes to the formation and propagation of interfacial cracks.A growth model was developed for hot corrosion products in alloys with varying impurity elements.
基金supported by the National Natural Science Foundation of China(12401482)the second author was supported by the National Natural Science Foundation of China(12371371,12261160361,11971366)supported by the Open Research Fund of Hubei Key Laboratory of Computational Science,Wuhan University.
文摘A new quadrilateral edge element method is proposed and analyzed for Maxwell equations.This proposed method is based on Duan-Liang quadrilateral element(Math.Comp.73(2004),pp.1–18).When applied to the eigenvalue problem,the method is spectral-correct and spurious-free.Stability and error estimates are obtained,including the interpolation error estimates and the error estimates between the finite element solution and the exact solution.The method is suitable for singular solution as well as smooth solution,and consequently,the method is valid for nonconvex domains which may have a number of reentrant corners.Of course,the method is suitable for arbitrary quadrilaterals(under the usual shape-regular condition).
基金supported by the Science and Technology Research Project of Henan Province(242102241055)the Industry-University-Research Collaborative Innovation Base on Automobile Lightweight of“Science and Technology Innovation in Central Plains”(2024KCZY315)the Opening Fund of State Key Laboratory of Structural Analysis,Optimization and CAE Software for Industrial Equipment(GZ2024A03-ZZU).
文摘The moving morphable component(MMC)topology optimization method,as a typical explicit topology optimization method,has been widely concerned.In the MMC topology optimization framework,the surrogate material model is mainly used for finite element analysis at present,and the effectiveness of the surrogate material model has been fully confirmed.However,there are some accuracy problems when dealing with boundary elements using the surrogate material model,which will affect the topology optimization results.In this study,a boundary element reconstruction(BER)model is proposed based on the surrogate material model under the MMC topology optimization framework to improve the accuracy of topology optimization.The proposed BER model can reconstruct the boundary elements by refining the local meshes and obtaining new nodes in boundary elements.Then the density of boundary elements is recalculated using the new node information,which is more accurate than the original model.Based on the new density of boundary elements,the material properties and volume information of the boundary elements are updated.Compared with other finite element analysis methods,the BER model is simple and feasible and can improve computational accuracy.Finally,the effectiveness and superiority of the proposed method are verified by comparing it with the optimization results of the original surrogate material model through several numerical examples.
文摘On the stone-paved lanes of Songyang County that date back to ancient times,morning mist lingered as a faint fragrance of tea wafted from a century-old house.Inside,Yang Junjie,a tea maker born in the 1980s,worked deftly at the stove,his hands moving swiftly over the scorching iron wok as tender green tea leaves dance between his fingers.
基金partially supported by the NSF(Grant No.DMS 2324368)by the Office of the Vice Chancellor for Research and Graduate Education at the University of Wisconsin-Madison with funding from the Wisconsin Alumni Research Foundation.
文摘In this paper,we propose a systematic approach for accelerating finite element-type methods by machine learning for the numerical solution of partial differential equations(PDEs).The main idea is to use a neural network to learn the solution map of the PDEs and to do so in an element-wise fashion.This map takes input of the element geometry and the PDE’s parameters on that element,and gives output of two operators:(1)the in2out operator for inter-element communication,and(2)the in2sol operator(Green’s function)for element-wise solution recovery.A significant advantage of this approach is that,once trained,this network can be used for the numerical solution of the PDE for any domain geometry and any parameter distribution without retraining.Also,the training is significantly simpler since it is done on the element level instead on the entire domain.We call this approach element learning.This method is closely related to hybridizable discontinuous Galerkin(HDG)methods in the sense that the local solvers of HDG are replaced by machine learning approaches.Numerical tests are presented for an example PDE,the radiative transfer or radiation transport equation,in a variety of scenarios with idealized or realistic cloud fields,with smooth or sharp gradient in the cloud boundary transition.Under a fixed accuracy level of 10^(−3) in the relative L^(2) error,and polynomial degree p=6 in each element,we observe an approximately 5 to 10 times speed-up by element learning compared to a classical finite element-type method.
基金supported in part by the National Key R&D Program of China (Contract Nos.2023YFA1606500,2024YFE0109800,and 2024YFE0110400)Strategic Priority Research Program of Chinese Academy of Sciences(Grant No.XDB34010000)+5 种基金the Gansu Key Project of Science and Technology (Grant No.23ZDGA014)the Guangdong Major Project of Basic and Applied Basic Research (Grant No.2021B0301030006)the National Natural Science Foundation of China (Grant Nos.12105328,W2412040,12475126,12422507,12035011,12375118,12435008,and W2412043)the Chinese Academy of Sciences Project for Young Scientists in Basic Research(Grant No.YSBR-002)the Youth Innovation Promotion Association of the Chinese Academy of Sciences (Grant Nos.2020409 and 2023439)the Russian Science Foundation (Grant No.25-42-00003)。
文摘We report the results of the experiment on synthesizing ^(287,288)Mc isotopes (Z=115) using the fusionevaporation reaction ^(243)Am(^(48)Ca,4n,3n)^(287,288)Mc at the Spectrometer for Heavy Atoms and Nuclear Structure-2(SHANS2),a gas-filled recoil separator located at the China Accelerator Facility for Superheavy Elements(CAFE2).In total,20 decay chains are attributed to ^(288)Mc and 1 decay chain is assigned to ^(287)Mc.The measured oa-decay properties of ^(287,288)Mc as well as its descendants are consistent with the known data.No additional decay chains originating from the 2n or 5n reaction channels were detected.The excitation function of the ^(243)Am(^(48)Ca,3n)^(288)Mc reaction was measured at the cross-section level of picobarn,which indicates the promising capability for the study of heavy and superheavy nuclei at the facility.
文摘This study presents and verifies a hybrid methodology for reliable determination of parameters in structural rheological models(Zener,Burgers,and Maxwell)describing the viscoelastic behavior of polyurethane specimens manufactured using extrusion-based 3D printing.Through comprehensive testing,including cyclic compression at strain rates ranging from 0.12 to 120 mm/min(0%-15%strain)and creep/relaxation experiments(10%-30%strain),the lumped parameters were independently determined using both analytical and numerical solutions of the models’differential equations,followed by cross-verification in additional experiments.Numerical solutions for creep and relaxation problems were obtained using finite element analysis,with the three-parameter Mooney-Rivlin model and Prony series employed to simulate elastic and viscous stress components,respectively.Energy dissipation per cycle was quantified during cyclic compression tests.The results demonstrate that all three models adequately describe material behavior within the 0%-15%strain range across various strain rates.Comparative analysis revealed the Burgers model’s superior performance in characterizing creep and stress relaxation at low strain levels.While Zener and Burgers model parameters from uniaxial compression showed limited applicability for energy dissipation calculations,the generalized Maxwell model effectively captured viscoelastic properties across different strain rates.Notably,parameters derived from creep tests provided a more universal assessment of dissipative properties due to optimization based on characteristic curve regions.Both parameter sets described polyurethane’s elastic-hysteretic behavior with approximately 20%error,proving significantly more accurate than the linear strain-time dependence hypothesis.Finite element analysis(FEA)complemented numerical modeling by demonstrating that while the generalized Maxwell model effectively describes initial rapid stress-strain changes,FEA provides superior characterization of steady-state processes.This computational approach yields more physically representative results compared to simplified analytical solutions,despite certain limitations in transient analysis.
基金supported by the National Natural Science Foundation of China(Grant Nos.12472194,12002018,11972004,11772031,11402015).
文摘In this work,the Hierarchical Quadrature Element Method(HQEM)formulation of geometrically exact shells is proposed and applied for geometrically nonlinear analyses of both isotropic and laminated shells.The stress resultant formulation is developed within the HQEM framework,consequently significantly simplifying the computations of residual force and stiffness matrix.The present formulation inherently avoids shear and membrane locking,benefiting from its high-order approximation property.Furthermore,HQEM’s independent nodal distribution capability conveniently supports local p-refinement and flexibly facilitates mesh generation in various structural configurations through the combination of quadrilateral and triangular elements.Remarkably,in lateral buckling analysis,the HQEM outperforms the weak-form quadrilateral element(QEM)in accuracy with identical nodal degrees of freedom(three displacements and two rotations).Under high-load nonlinear response,the QEM exhibits a maximum relative deviation of approximately 9.5%from the reference,while the HQEM remains closely aligned with the benchmark results.In addition,for the cantilever beam under tip moment,HQEM produces virtually no out-of-plane deviation,compared to a slight deviation of 0.00001 with QEM,confirming its superior numerical reliability.In summary,the method demonstrates high accuracy,superior convergence,and robustness in handling large rotations and complex post-buckling behaviors across a series of benchmark problems.
基金financially supported by the Fundamental Research Funds for the Central Universities,China University of Geosciences(Wuhan)(Grant Nos.CUGGC09 and CUG200637)Opening Fund of Key Laboratory of Unconventional Oil&Gas Development(China University of Petroleum(East China)),Ministry of Education(Grant No.19CX05005A-201)the Sinopec Science and Technology Department(Grant Nos.P2006 and 33550000-21-ZC0611-0006)。
文摘Super-heavy oil is a significant unconventional energy source,and more than 30 years of research have shown that steam-assisted gravity drainage(SAGD)technology is suitable for thick super-heavy oil reservoirs.Recently,more and more thin-layer super-heavy oil reservoirs have been discovered in China,while their deep buried depth and serous heterogeneity make the existing SAGD technology difficult to apply,so it is urgent to improve the existing SAGD technology for the thin-layer super-heavy oil.To this end,this paper focuses on the enlightenment of field application in SAGD technology.Firstly,based on typical SAGD field projects,the development history of SAGD technology in the world was reviewed,and the influence of reservoir physical properties on the application of SAGD technology in thin-layer superheavy oil reservoirs was analyzed.Secondly,the well pattern,wellbore structure,pre-heating,artificial lift,and monitor technique of SAGD were detailed described,and their adjustment direction was expounded for the development of thin-layer super-heavy oil reservoirs.Lastly,the gas-and solventassistant SAGD were comprehensively evaluated,and their application potential in thin-layer superheavy oil reservoirs was studied.The research results can provide theoretical guidance for the application of SAGD technology in thin-layer super-heavy oil reservoirs.
基金National Key R&D Program of China(Nos.2019YFC1711000 and 2018YFC1707900)the National Natural Science Foundation of China(No.8200140730)Qi-Huang Scholar of National Traditional Chinese Medicine Leading Talents Support Program(2018)。
文摘In this study,a high performance thin-layer chromatography/single quadrupole mass spectrometry QDa(HPTLC-QDa)method for robust authentication of Ganoderma lucidum,a popular and valuable herbal medicine,has been developed.This method is simple and practical,which allows direct generation of characteristic mass spectra from the HPTLC plates automatically with the application of in situ solvent desorption interface.The HPTLC silica gel plates were developed with toluene-ethyl formate-formic acid(5:5:0.2,V/V)and all bands were transferred to QDa system directly in situ using 80%methanol with 0.1%formic acid as desorption solvent.The acquired HPTLC-QDa spectra showed that luminous yellow band b3,containing ganoderic acid B/G/H and ganodeneric acid B,the major active components of Ganoderma,could be found only in G.lucidum and G.lucidum(Antler-shaped),but not in G.sinense and G.applanatum.Moreover,bands b13 and b14 with m/z 475/477 and m/z 475/491/495,respectively,could be detected in G.lucidum(Antler-shaped),but not in G.lucidum,thus allowing simple and robust authentication of G.lucidum with confused species.This method is proved to be simple,practical and reproducible,which can be extended to analyze other herbal medicines.
基金Supported by the National Nature Science Foundation of China （50930006） Acknowledgment The authors thank Shenzhen Water Group Co., Ltd. （China） for their support for this project and also Si Yaohui, Ph.D., for his assistance.
文摘Since the adverse factors such as deficient penetration and long reaction time have restricted the complete microwave-used drying of municipal sludge, the microwave-induced drying is considered, which has advantages in such aspects. The investigation of the microwave-induced drying to uncover the mechanism bears great meaning for its development and utilization. The effects of temperature and microwave cracking in municipal sewage sludge drying characteristics are stud- ied through municipal sewage sludge drying experiment. Experiments shows that higher drying temperature would lead to a more acutely changing drying rate （DR）. The DR had increased from 0.005 g/（g.min） to 0.060 g/（g·min）, which was 12 times enlarged, while the temperature rose from 70℃ to 160 ℃. The higher the temperature was, the earlier the peak value of DR appeared. The experiments indicated that the temperature was the decisive factor affecting the DR. The microwave-induced sludge reached the highest DR at the moisture rate （MR） of 40%, with a 20% grade promotion compared with that of the original one. The molecular fracture caused by microwave radiation had obviously accelerated the drying process and the DR was rising in proportion to the microwave radiation dose. The diffusion coefficient had been calculated according to Fick＇s law. In com- parison to that of the original one, the diffusion coefficient of microwave-induced sludge was obviously enlarged more than two times. By fit examinations, Model Weibull was proven to be the most fit one for thermal thin-layer drying of municipal sludge. By means of Arrhenius equation, the obtained average activation energy of municipal sludge was 37.1 kJ/（mol·K）.
基金Supported by the National Natural Science Foundation of China(42172177)CNPC Scientific Research and Technological Development Project(2021DJ05)PetroChina-Southwest University of Petroleum Innovation Consortium Project(2020CX020000).
文摘Based on the study of the distribution of intra-platform shoals and the characteristics of dolomite reservoirs in the Middle Permian Qixia Formation in the Gaoshiti–Moxi area of the Sichuan Basin,SW China,the controlling factors of reservoir development were analyzed,and the formation model of“intra-platform shoal thin-layer dolomite reservoir”was established.The Qixia Formation is a regressive cycle from bottom to top,in which the first member(Qi1 Member)develops low-energy open sea microfacies,and the second member(Qi2 Member)evolves into intra-platform shoal and inter-shoal sea with decreases in sea level.The intra-platform shoal is mainly distributed near the top of two secondary shallowing cycles of the Qi2 Member.The most important reservoir rock of the Qixia Formation is thin-layer fractured-vuggy dolomite,followed by vuggy dolomite.The semi-filled saddle dolomite is common in fracture-vug,and intercrystalline pores and residual dissolution pores combined with fractures to form the effective pore-fracture network.Based on the coupling analysis of sedimentary and diagenesis characteristics,the reservoir formation model of“pre-depositional micro-paleogeomorphology controlling shoal,sedimentary shoal controlling dolomite,penecontemporaneous dolomite benefiting preservation of pores,and late hydrothermal action effectively improving reservoir quality”was systematically established.The“first-order high zone”micro-paleogeomorphology before the deposition of the Qixia Formation controlled the development of large area of intra-platform shoals in Gaoshiti area during the deposition of the Qi2 Member.Shoal facies is the basic condition of early dolomitization,and the distribution range of intra-platform shoal and dolomite reservoir is highly consistent.The grain limestone of shoal facies is transformed by two stages of dolomitization.The penecontemporaneous dolomitization is conducive to the preservation of primary pores and secondary dissolved pores.The burial hydrothermal fluid enters the early dolomite body along the fractures associated with the Emeishan basalt event,makes it recrystallized into medium–coarse crystal dolomite.With the intercrystalline pores and the residual vugs after the hydrothermal dissolution along the fractures,the high-quality intra-platform shoal-type thin-layer dolomite reservoirs are formed.The establishment of this reservoir formation model can provide important theoretical support for the sustainable development of Permian gas reservoirs in the Sichuan Basin.
基金supported by the National Science and Technology Pillar Program(No.2012BAC04B02)the National Natural Science Fund of China(No.51408243)+3 种基金the Natural Science Foundation of Fujian Province of China(No.2015J01213)the Fundamental Research Funds for Central Universities(No.11QZR07)the Science and Technology Plan Fund of Quanzhou City(No.2014Z218)the Research Funds of Huaqiao University(No.14BS216)
文摘Bioreactive thin-layer capping（BTC）with biozeolite provides a potential remediation design that can sustainably treat N contamination from sediment and overlying water in eutrophic water bodies.Nitrogen（N）reduction using BTC with biozeolite was examined in a field incubation experiment in a eutrophic river in Yangzhou,Jiangsu Province,China.The biozeolite was zeolite with attached bacteria,including two isolated heterotrophic nitrifiers（Bacillus spp.）and two isolated aerobic denitrifiers（Acinetobacter spp.）.The results showed that the total nitrogen（TN）reduction efficiency of the overlying water by BTC with biozeolite（with thickness of about 2 mm）reached a maximum（56.69%）at day 34,and simultaneous heterotrophic nitrification and aerobic denitrification occurred in the BTC system until day 34.There was a significant difference in the TN concentrations of the overlying water between biozeolite capping and control（t-test;p〈0.05）.The biozeolite had very strong in situ bioregeneration ability.Carbon was the main source of nitrifier growth.However,both dissolved oxygen（DO）and carbon concentrations affected denitrifier growth.In particular,DO concentrations greater than 3 mg/L inhibited denitrifier growth.Therefore,BTC with biozeolite was found to be a feasible technique to reduce N in a eutrophic river.However,it is necessary to further strengthen the adaptability of aerobic denitrifiers through changing domestication methods or conditions.
文摘The construction and characteristics of a microscale long-optical-path electrochemi- cal cell with a plug-in thin-layer electrode are described.Using ferricyanide as the test species,the thermodynamic parameters of electron transfer processes are determined at car- bon,plantinum,and gold electrodes.
