This paper prepared a novel as-cast W-Zr-Ti metallic ESM using high-frequency vacuum induction melting technique.The above ESM performs a typical elastic-brittle material feature and strain rate strengthening behavior...This paper prepared a novel as-cast W-Zr-Ti metallic ESM using high-frequency vacuum induction melting technique.The above ESM performs a typical elastic-brittle material feature and strain rate strengthening behavior.The specimens exhibit violent chemical reaction during the fracture process under the impact loading,and the size distribution of their residual debris follows Rosin-Rammler model.The dynamic fracture toughness is obtained by the fitting of debris length scale,approximately 1.87 MPa·m~(1/2).Microstructure observation on residual debris indicates that the failure process is determined by primary crack propagation under quasi-static compression,while it is affected by multiple cracks propagation in both particle and matrix in the case of dynamic impact.Impact test demonstrates that the novel energetic fragment performs brilliant penetration and combustion effect behind the front target,leading to the effective ignition of fuel tank.For the brittleness of as-cast W-ZrTi ESM,further study conducted bond-based peridynamic(BB-PD)C++computational code to simulate its fracture behavior during penetration.The BB-PD method successfully captured the fracture process and debris cloud formation of the energetic fragment.This paper explores a novel as-cast metallic ESM,and provides an available numerical avenue to the simulation of brittle energetic fragment.展开更多
This paper introduces a bond-based peridynamics(BB-PD)algorithm for crack identification,integrating the Delaunay triangulation method to accurately identify the structural characteristics of threedimensional(3D)crack...This paper introduces a bond-based peridynamics(BB-PD)algorithm for crack identification,integrating the Delaunay triangulation method to accurately identify the structural characteristics of threedimensional(3D)cracks in rocks.A bond-based crack quantification standard is proposed to analyze the evolution of cracks of various sizes.A multi-attribute peridynamic model,developed using a multilayer algorithm,was employed to simulate the fracturing process of sandstone disks and semi-disks under varying temperatures,with the model calibrated and validated against experimental results.The simulation results show that temperature induces nonlinear degradation in the tensile strength and fracture toughness of sandstone,with 500℃ identified as the threshold temperature.Thermal cracks exhibit varying degrees of influence on Mode I cracks across different temperature ranges.Thermal damage significantly promotes the initiation and propagation of Mode I cracks in sandstone,thereby reducing its tensile strength and fracture toughness.Under applied loads,crack propagation in sandstone predominantly occurs during the failure stage,characterized by the rapid growth of longer cracks and a slow increase or reduction in shorter cracks.展开更多
The collective dynamic of a fractional-order globally coupled system with time delays and fluctuating frequency is investigated.The power-law memory of the system is characterized using the Caputo fractional derivativ...The collective dynamic of a fractional-order globally coupled system with time delays and fluctuating frequency is investigated.The power-law memory of the system is characterized using the Caputo fractional derivative operator.Additionally,time delays in the potential field force and coupling force transmission are both considered.Firstly,based on the delay decoupling formula,combined with statistical mean method and the fractional-order Shapiro–Loginov formula,the“statistic synchronization”among particles is obtained,revealing the statistical equivalence between the mean field behavior of the system and the behavior of individual particles.Due to the existence of the coupling delay,the impact of the coupling force on synchronization exhibits non-monotonic,which is different from the previous monotonic effects.Then,two kinds of theoretical expression of output amplitude gains G and G are derived by time-delay decoupling formula and small delay approximation theorem,respectively.Compared to G,G is an exact theoretical solution,which means that G is not only more accurate in the region of small delay,but also applies to the region of large delay.Finally,the study of the output amplitude gain G and its resonance behavior are explored.Due to the presence of the potential field delay,a new resonance phenomenon termed“periodic resonance”is discovered,which arises from the periodic matching between the potential field delay and the driving frequency.This resonance phenomenon is analyzed qualitatively and quantitatively,uncovering undiscovered characteristics in previous studies.展开更多
Sandwich piezoelectric semiconductor(PS)structures have significant applications in multi-functional semiconductor devices.The analysis of multi-field coupling behaviors of PS structures is of fundamental importance i...Sandwich piezoelectric semiconductor(PS)structures have significant applications in multi-functional semiconductor devices.The analysis of multi-field coupling behaviors of PS structures is of fundamental importance in developing novel PS devices.In this paper,we develop a general temperature-deformation-polarization-carrier(TDPC)coupling model for sandwich-type PS beams involving pyroelectricity under thermal loadings,based on three-dimensional(3D)basic equations of the thermo-piezoelectric semiconductor(TPS).We derive analytical solutions for extensional,bending,and buckling deformations of simply-supported sandwich n-type PS beams subjected to open-circuit and electrically isolated boundary conditions.The accuracy of the proposed model in this paper is verified through finite element simulations implemented in the COMSOL software.Numerical results show that the initial electron concentration and the thickness ratio of the PS layer to the beam's total thickness have a significant effect on thermally induced extensional and bending responses,as well as critical buckling mechanical and thermal loadings.This study provides a theoretical framework and guidance for designing semiconductor devices based on sandwich PS beam structures.展开更多
A geometrically nonlinear topology optimization(GNTO)method with thermal–mechanical coupling is investigated.Firstly,the new expression of element coupling stress due to superimposed mechanical and thermal loading is...A geometrically nonlinear topology optimization(GNTO)method with thermal–mechanical coupling is investigated.Firstly,the new expression of element coupling stress due to superimposed mechanical and thermal loading is obtained based on the geometrically nonlinear finite element analysis.The lightweight topology optimization(TO)model under stress constraints is established to satisfy the strength requirement.Secondly,the distortion energy theory is introduced to transform themodel into structural strain energy constraints in order to solve the implicit relationship between stress constraints and design variables.Thirdly,the sensitivity analysis of the optimization model is derived,and the model is solved by the method of moving asymptotes(MMA).Numerical examples show that temperature has a significant effect on the optimal configuration,and the TO method considering temperature load is closer to engineering design requirements.The proposed method can be extended to the GNTO design with multiple physical field coupling.展开更多
The thermal-mechanical coupling finite element method(FEM)was usedto simulate a non-isothermal sheet metal extrusion process. On thebasis of the finite plasticity consistent with multiplicativedecomposition of the def...The thermal-mechanical coupling finite element method(FEM)was usedto simulate a non-isothermal sheet metal extrusion process. On thebasis of the finite plasticity consistent with multiplicativedecomposition of the deformation gradient, the enhanced as- sumedstrain(EAS)FEM was applied to carry out the numerical simulation. Inorder to make the computation reliable ad avoid hour- glass mode inthe EAS element under large compressive strains, an alterative formof the original enhanced deformation gradient was employed. Inaddition, reduced factors were used in the computation of the elementlocal internal parameters and the enhanced part of elementalstiffness.展开更多
Ultrasonic vibration-assisted grinding(UVAG)is an effective and promising method for machining of hard-to-cut materials.This article proposed an ultrasonic vibration plate device enabling the longitudinal full-wave an...Ultrasonic vibration-assisted grinding(UVAG)is an effective and promising method for machining of hard-to-cut materials.This article proposed an ultrasonic vibration plate device enabling the longitudinal full-wave and transverse half-wave(L2T1)vibration mode for UVAG.The characteristics of two-dimensional coupled vibration in different directions were analyzed on the basis of apparent elastic method and finite element method.Furthermore,a correction factor was applied to correct the frequency error caused by the apparent elastic method.Finally,the comparative experiments between the conventional creep-feed grinding and UVAG of Inconel 718 nickel-based superalloy were carried out.The results indicate that the apparent elastic method with the correction factor is accurate for the design of plate device under the L2T1 vibration mode.Compared with the conventional creep-feed grinding,the UVAG causes the reduction of grinding force and the improvement of machined surface quality of Inconel 718 nickel-based superalloy.Furthermore,under the current experimental conditions,the optimal ultrasonic vibration amplitude is determined as 6μm,with which the minimum surface roughness is achieved.展开更多
Semiconductor-based electronic devices usually work under multiphysics fields rendering complex electromagnetic-thermo-mechanical coupling.In this work,we develop a penalty function method based on a finite element an...Semiconductor-based electronic devices usually work under multiphysics fields rendering complex electromagnetic-thermo-mechanical coupling.In this work,we develop a penalty function method based on a finite element analysis to tackle this coupling behavior in a metal/semiconductor bilayer plate-the representative unit of semiconductor antenna,which receives strong and pulsed electromagnetic signals.Under these pulses,eddy current is generated,of which the magnitude varies remarkably from one plate to another due to the difference in electrical conductivity.In the concerned system,the metal layer generates much larger current,resulting in the large temperature rise and the nonnegligible Lorentz force,which could lead to delamination and failure of the semiconductor-based electronic device.This study provides theoretical guidance for the design and protection of semiconductor-based electronic devices in complex environments.展开更多
The bifurcation behavior of the CO coupling reactor was examined based on the one-dimensional pseudo homogeneous axial dispersion dynamic model. The method of finite difference was used for solving the boundary value ...The bifurcation behavior of the CO coupling reactor was examined based on the one-dimensional pseudo homogeneous axial dispersion dynamic model. The method of finite difference was used for solving the boundary value problem; the continuation technique and the direct method were applied to determine the bifurcation diagram. The effects of dimensionless adiabatic temperature rise, Damkohler number, activation energy, heat transfer coefficient and feed ratio on the bifurcation behavior were investigated. It was shown that there existed static bifurcation and the oscillations did not occur in the reactor. The result also revealed that the reactor exhibited at most 1-3-1 multiplicity patterns within the range of practical possible parameters and the measures, such as weakening the axial dispersion of reactor, enhancing heat transfer, decreasing the concentration of ethyl nitrite, were efficient for avoiding the possible risk of multiple steady states.展开更多
This study investigates the dynamical behavior of two parallel fluid-conveying pipes by developing a non-planar dynamical model of the two pipes coupled with an intermediate spring. A systematic analysis is conducted ...This study investigates the dynamical behavior of two parallel fluid-conveying pipes by developing a non-planar dynamical model of the two pipes coupled with an intermediate spring. A systematic analysis is conducted to evaluate the effects of spring parameters on the non-planar vibration characteristics and buckling behaviors of the coupled system. The nonlinear governing equations are derived with Hamilton's principle,subsequently discretized through Galerkin's method, and finally numerically solved by the Runge-Kutta algorithm. Based on the linearized equations, an eigenvalue analysis is performed to obtain the coupled frequencies, modal shapes, and critical flow velocities for buckling instability. Quantitative assessments further elucidate the effects of the spring position and stiffness coefficient on the coupled frequencies and critical flow velocities.Nonlinear dynamic analyses reveal the evolution of buckling patterns and bifurcation behaviors between the lateral displacements of the two pipes and the flow velocity. Numerical results indicate that the intermediate spring increases the susceptibility to buckling instability in the out-of-plane direction compared with the in-plane direction. Furthermore, synchronized lateral displacements emerge in both pipes when the flow velocity of one pipe exceeds the critical threshold. This work is expected to provide a theoretical foundation for the stability assessment and vibration analysis in coupled fluid-conveying pipe systems.展开更多
While the deformation behavior of rare-earth magnesium alloys at high temperatures has been extensively studied,the deformation mechanisms under moderate-to-low temperatures and high strain rates remain insufficiently...While the deformation behavior of rare-earth magnesium alloys at high temperatures has been extensively studied,the deformation mechanisms under moderate-to-low temperatures and high strain rates remain insufficiently understood.To address this gap,hot compression tests were conducted on a Mg-11Gd-3Y-0.5Zr(wt.%)alloy over a temperature range of 150℃–450℃under strain rates of 10^(-3) s^(-1)(low strain rate(LSR))and 10 s^(-1)(high strain rate(HSR))to explore the strain rate-temperature coupling effects during hot deformation.The results revealed an anomalous increase in peak stress at 150℃–250℃as the strain rate decreased,attributed to the combined effects of nano-precipitates,dislocation cell structures,and serrated flow induced by dynamic strain aging.At higher temperatures,strain rate influences softening pathways:under HSR at 450℃,the effect of twinning shifts from strengthening to facilitating dynamic recrystallization(DRX),resulting in substantial grain refinement(-4 μm,81%area fraction at a strain of 0.6).In contrast,at LSR,softening is dominated by dynamic recovery at 350℃,with limited DRX(-4 μm grains,10%area fraction at a strain of 0.6)occurs at 400℃.These findings clarify the dual role of twinning and its interaction with rate-temperature conditions,providing valuable insights into optimizing the hot processing of rare-earth magnesium alloys.展开更多
Poly(phthalazinone ether sulfone ketone)(PPESK)is a new-generation high-performance thermoplastic resin that exhibits excellent thermal stability and mechanical properties.However,its damage and failure mechanisms und...Poly(phthalazinone ether sulfone ketone)(PPESK)is a new-generation high-performance thermoplastic resin that exhibits excellent thermal stability and mechanical properties.However,its damage and failure mechanisms under high-temperature and high-strain-rate coupling conditions remain unclear,significantly limiting the engineering applications of PPESK-based composites in extreme environments such as aerospace.To address this issue,in this study,a temperature-controlled split Hopkinson pressure bar experimental platform was developed for dynamic tensile/compressive loading scenarios.Combined with scanning electron microscopy and molecular dynamics simulations,the thermomechanical behavior and failure mechanisms of PPESK were systematically investigated over the temperature range of 293-473 K.The study revealed a novel"dynamic hysteresis brittle behavior"and its underlying"segmental activation±response lag antagonistic mechanism".The results showed that the strain-rate-induced response lag of polymer chain segments significantly weakened the viscous dissipation capacity activated by thermal energy at elevated temperatures.Although high-strain-rate conditions led to notable enhancement in the dynamic strength of the material(with an increase of 8%-233%,reaching 130%-330%at elevated temperatures),the fracture surface morphology tended to become smoother,and brittle fracture characteristics became more pronounced.Based on these findings,a temperature±strain rate hysteresis antagonistic function was constructed,which effectively captured the competitive relationship between temperature-driven relaxation behavior and strain-rateinduced hysteresis in thermoplastic resins.A multiscale damage evolution constitutive model with temperature±rate coupling was subsequently established and numerically implemented via the VUMAT user subroutine.This study not only unveils the nonlinear damage mechanisms of PPESK under combined service temperatures and dynamic/static loading conditions,but also provides a strong theoretical foundation and engineering guidance for the constitutive modeling and parametric design of thermoplastic resin-based materials.展开更多
Subgrade settlement is a common issue in soil ground within earthquake-prone regions,posing a threat to the safe operation of train-slab track coupled system(TSCS)in high-speed railways(HSRs).This study aims to analyz...Subgrade settlement is a common issue in soil ground within earthquake-prone regions,posing a threat to the safe operation of train-slab track coupled system(TSCS)in high-speed railways(HSRs).This study aims to analyze the mechanical behavior evolution of TSCS under subgrade settlement and earthquake excitation.The refined numerical model of slab track under subgrade differential settlement is established.The short settlement wavelength of 10 m causes the separation between the base and subgrade.The dynamic model of TSCS under subgrade settlement and earthquake excitation is developed.The dynamic response of TSCS exhibits more pronounced fluctuations under the combined effects of subgrade settlement and earthquake excitation than under the effects of settlement or earthquake alone.The evaluation indexes for the running safety of train on slab track under different settlement wavelengths exhibit varying degrees of increase with settlement amplitude and are particularly sensitive to the short settlement wavelength of 10 m.The wheel unloading rate and derailment coefficient of TSCS increase with earthquake intensity.Under the settlement wavelength of 10 m and amplitude of 20 mm,the wheel unloading rate of TSCS exceeds the allowable limit when the earthquake intensity exceeds 0.17g,and the derailment coefficient exceeds the allowable limit when the earthquake intensity surpasses 0.29g.展开更多
Based on the fact that rubbed groove patterns also affect the anchoring of liquid crystals at substrates,a quartic coupling is included in constructing the surface energy for a liquid crystal cell.The phase diagram an...Based on the fact that rubbed groove patterns also affect the anchoring of liquid crystals at substrates,a quartic coupling is included in constructing the surface energy for a liquid crystal cell.The phase diagram and the wetting behaviors of the liquid crystal cell,bounded by surfactant-laden interfaces in a magnetic field perpendicular to the substrate are discussed by taking the quartic coupling into account.The nematic order increases at the surface while it decreases in the bulk as a result of the introduction of quartic substrate-liquid crystal coupling,indicating that the groove anchoring makes the liquid crystal molecules align more orderly near the substrate than away from it.This causes a different wetting behavior：complete wetting.展开更多
The dynamical equations for a inertial reciprocating machine excited by two rotating eccentric weights were built by the matrix methodology for establishing dynamical equations of discrete systems. A mathematical mode...The dynamical equations for a inertial reciprocating machine excited by two rotating eccentric weights were built by the matrix methodology for establishing dynamical equations of discrete systems. A mathematical model of electromechanical coupling system for the machine was formed by combining the dynamical equations with the state equations of the two motors. The computer simulation to the model was performed for several values of the damping coefficient or the motor power, respectively. The substance of transient behavior of the machine is unveiled by analyzing the results of the computer simulation, and new methods are presented for diminishing the transient amplitude of the vibrating machine and improving the transient behavior. The reliable mathematical model is provided for intelligent control of the transient behavior and engineering design of the equipment.展开更多
Dynamic-Relaxation Method (DRM) is applied to studying the influence of compression-bending coupling on nonlinear behavior of cylindrically slightly curved panels of unsymmetric laminated composite materials subjected...Dynamic-Relaxation Method (DRM) is applied to studying the influence of compression-bending coupling on nonlinear behavior of cylindrically slightly curved panels of unsymmetric laminated composite materials subjected to uniform uniaxial Compression during loading and unloading. Numerical results are given for cross-ply plates and panels under S4S4 and S4S2 boundary conditions. The results show that the effects of absolute value and the sign of the coupling coefficient on the stability behavior of the panles are significant.展开更多
The static and kinematic shakedown of a functionally graded （FG） Bree plate is analyzed. The plate is subjected to coupled constant mechanical load and cyclically varying temperature. The material is assumed linearl...The static and kinematic shakedown of a functionally graded （FG） Bree plate is analyzed. The plate is subjected to coupled constant mechanical load and cyclically varying temperature. The material is assumed linearly elastic and nonlinear isotropic hardening with elastic modulus,yield strength and the thermal expansion coeffcient varying exponentially through the thickness of the plate. The boundaries between the shakedown area and the areas of elasticity,incremental collapse and reversed plasticity are determined,respectively. The shakedown of the counterpart made of homogeneous material with average material properties is also analyzed. The comparison between the results obtained in the two cases exhibits distinct qualitative and quantitative difference,indicating the importance of shakedown analysis for FG structures. Since FG structures are usually used in the cases where severe coupled cyclic thermal and mechanical loadings are applied,the approach developed and the results obtained are significant for the analysis and design of such kind of structures.展开更多
A mathematical model of electromechanical coupling system for a planar inertial vibrating machine is built by setting up dynamical equations of discrete systems with a matrix methodology proposed. The substance of the...A mathematical model of electromechanical coupling system for a planar inertial vibrating machine is built by setting up dynamical equations of discrete systems with a matrix methodology proposed. The substance of the transient behavior of the machine is unveiled by analyzing the results of the computer simulation to the model, and new methods are presented for diminishing the transient amplitude of the vibrating machine and improving the transient behavior. The reliable mathematical model is provided for intelligent control of the transient behavior of the equipment.展开更多
Although the complex structure-preserving method presented in our previous studies can be used to investigate the orbit–attitude–vibration coupled dynamic behaviors of the spatial flexible damping beam,the simulatio...Although the complex structure-preserving method presented in our previous studies can be used to investigate the orbit–attitude–vibration coupled dynamic behaviors of the spatial flexible damping beam,the simulation speed still needs to be improved.In this paper,the infinite-dimensional dynamic model describing the orbit–attitude–vibration coupled dynamic problem of the spatial flexible damping beam is pretreated by the method of separation of variables,and the second-level fourth-order symplectic Runge–Kutta scheme is constructed to investigate the coupling dynamic behaviors of the spatial flexible damping beam quickly.Compared with the simulation speed of the complex structure-preserving method,the simulation speed of the symplectic Runge–Kutta method is faster,which benefits from the pretreatment step.The effect of the initial radial velocity on the transverse vibration as well as on the attitude evolution of the spatial flexible damping beam is presented in the numerical examples.From the numerical results about the effect of the initial radial velocity,it can be found that the appearance of the initial radial velocity can decrease the vibration frequency of the spatial beam and shorten the evolution interval for the attitude angle to tend towards a stable value significantly.In addition,the validity of the numerical results reported in this paper is verified by comparing with some numerical results presented in our previous studies.展开更多
A comprehensive model that included mechanical dynamics of the shock absorber coupled with its thermal properties was proposed innovatively.Moreover a thermal-mechanical coupled model which reflected the closed-loop p...A comprehensive model that included mechanical dynamics of the shock absorber coupled with its thermal properties was proposed innovatively.Moreover a thermal-mechanical coupled model which reflected the closed-loop positive feedback system was established by using MATLAB/SIMULINK,and some curves of shock absorber temperature rising characteristic were obtained by simulation ＆computation under several operating modes and different parameters conditions.Research results show that：shock absorber design parameters,external excitations,and thermo-physical properties parameter,such as oil density have effect on the shock absorber temperature rising characteristic.However other thermo-physical properties parameters,such as oil specific heat,cylinder density,cylinder specific heat,and cylinder thermal conductivity,have no effect on it.The results may be used for studying reliability design of the shock absorber.展开更多
文摘This paper prepared a novel as-cast W-Zr-Ti metallic ESM using high-frequency vacuum induction melting technique.The above ESM performs a typical elastic-brittle material feature and strain rate strengthening behavior.The specimens exhibit violent chemical reaction during the fracture process under the impact loading,and the size distribution of their residual debris follows Rosin-Rammler model.The dynamic fracture toughness is obtained by the fitting of debris length scale,approximately 1.87 MPa·m~(1/2).Microstructure observation on residual debris indicates that the failure process is determined by primary crack propagation under quasi-static compression,while it is affected by multiple cracks propagation in both particle and matrix in the case of dynamic impact.Impact test demonstrates that the novel energetic fragment performs brilliant penetration and combustion effect behind the front target,leading to the effective ignition of fuel tank.For the brittleness of as-cast W-ZrTi ESM,further study conducted bond-based peridynamic(BB-PD)C++computational code to simulate its fracture behavior during penetration.The BB-PD method successfully captured the fracture process and debris cloud formation of the energetic fragment.This paper explores a novel as-cast metallic ESM,and provides an available numerical avenue to the simulation of brittle energetic fragment.
基金financially supported by the National Natural Science Foundation of China(Grant No.42077231).
文摘This paper introduces a bond-based peridynamics(BB-PD)algorithm for crack identification,integrating the Delaunay triangulation method to accurately identify the structural characteristics of threedimensional(3D)cracks in rocks.A bond-based crack quantification standard is proposed to analyze the evolution of cracks of various sizes.A multi-attribute peridynamic model,developed using a multilayer algorithm,was employed to simulate the fracturing process of sandstone disks and semi-disks under varying temperatures,with the model calibrated and validated against experimental results.The simulation results show that temperature induces nonlinear degradation in the tensile strength and fracture toughness of sandstone,with 500℃ identified as the threshold temperature.Thermal cracks exhibit varying degrees of influence on Mode I cracks across different temperature ranges.Thermal damage significantly promotes the initiation and propagation of Mode I cracks in sandstone,thereby reducing its tensile strength and fracture toughness.Under applied loads,crack propagation in sandstone predominantly occurs during the failure stage,characterized by the rapid growth of longer cracks and a slow increase or reduction in shorter cracks.
基金supported by the Natural Science Foundation of Sichuan Province,China(Youth Science Foundation)(Grant No.2022NSFSC1952).
文摘The collective dynamic of a fractional-order globally coupled system with time delays and fluctuating frequency is investigated.The power-law memory of the system is characterized using the Caputo fractional derivative operator.Additionally,time delays in the potential field force and coupling force transmission are both considered.Firstly,based on the delay decoupling formula,combined with statistical mean method and the fractional-order Shapiro–Loginov formula,the“statistic synchronization”among particles is obtained,revealing the statistical equivalence between the mean field behavior of the system and the behavior of individual particles.Due to the existence of the coupling delay,the impact of the coupling force on synchronization exhibits non-monotonic,which is different from the previous monotonic effects.Then,two kinds of theoretical expression of output amplitude gains G and G are derived by time-delay decoupling formula and small delay approximation theorem,respectively.Compared to G,G is an exact theoretical solution,which means that G is not only more accurate in the region of small delay,but also applies to the region of large delay.Finally,the study of the output amplitude gain G and its resonance behavior are explored.Due to the presence of the potential field delay,a new resonance phenomenon termed“periodic resonance”is discovered,which arises from the periodic matching between the potential field delay and the driving frequency.This resonance phenomenon is analyzed qualitatively and quantitatively,uncovering undiscovered characteristics in previous studies.
基金Project supported by the National Natural Science Foundation of China(No.11672265)。
文摘Sandwich piezoelectric semiconductor(PS)structures have significant applications in multi-functional semiconductor devices.The analysis of multi-field coupling behaviors of PS structures is of fundamental importance in developing novel PS devices.In this paper,we develop a general temperature-deformation-polarization-carrier(TDPC)coupling model for sandwich-type PS beams involving pyroelectricity under thermal loadings,based on three-dimensional(3D)basic equations of the thermo-piezoelectric semiconductor(TPS).We derive analytical solutions for extensional,bending,and buckling deformations of simply-supported sandwich n-type PS beams subjected to open-circuit and electrically isolated boundary conditions.The accuracy of the proposed model in this paper is verified through finite element simulations implemented in the COMSOL software.Numerical results show that the initial electron concentration and the thickness ratio of the PS layer to the beam's total thickness have a significant effect on thermally induced extensional and bending responses,as well as critical buckling mechanical and thermal loadings.This study provides a theoretical framework and guidance for designing semiconductor devices based on sandwich PS beam structures.
基金provided by the National Natural Science Foundation ofChina(Grant No.11872080)Beijing Natural Science Foundation(Grant No.3192005).
文摘A geometrically nonlinear topology optimization(GNTO)method with thermal–mechanical coupling is investigated.Firstly,the new expression of element coupling stress due to superimposed mechanical and thermal loading is obtained based on the geometrically nonlinear finite element analysis.The lightweight topology optimization(TO)model under stress constraints is established to satisfy the strength requirement.Secondly,the distortion energy theory is introduced to transform themodel into structural strain energy constraints in order to solve the implicit relationship between stress constraints and design variables.Thirdly,the sensitivity analysis of the optimization model is derived,and the model is solved by the method of moving asymptotes(MMA).Numerical examples show that temperature has a significant effect on the optimal configuration,and the TO method considering temperature load is closer to engineering design requirements.The proposed method can be extended to the GNTO design with multiple physical field coupling.
基金[This work was financially supported by a research grant from the Hong Kong Polytechnic University (No.G-V694).]
文摘The thermal-mechanical coupling finite element method(FEM)was usedto simulate a non-isothermal sheet metal extrusion process. On thebasis of the finite plasticity consistent with multiplicativedecomposition of the deformation gradient, the enhanced as- sumedstrain(EAS)FEM was applied to carry out the numerical simulation. Inorder to make the computation reliable ad avoid hour- glass mode inthe EAS element under large compressive strains, an alterative formof the original enhanced deformation gradient was employed. Inaddition, reduced factors were used in the computation of the elementlocal internal parameters and the enhanced part of elementalstiffness.
基金financially supported by the National Natural Science Foundation of China(Nos.51921003 and 51775275)National Key Laboratory of Science and Technology on Helicopter Transmission(Nanjing University of Aeronautics and Astronautics)(No.HTL-A-20G01)Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.KYCX20_0179)。
文摘Ultrasonic vibration-assisted grinding(UVAG)is an effective and promising method for machining of hard-to-cut materials.This article proposed an ultrasonic vibration plate device enabling the longitudinal full-wave and transverse half-wave(L2T1)vibration mode for UVAG.The characteristics of two-dimensional coupled vibration in different directions were analyzed on the basis of apparent elastic method and finite element method.Furthermore,a correction factor was applied to correct the frequency error caused by the apparent elastic method.Finally,the comparative experiments between the conventional creep-feed grinding and UVAG of Inconel 718 nickel-based superalloy were carried out.The results indicate that the apparent elastic method with the correction factor is accurate for the design of plate device under the L2T1 vibration mode.Compared with the conventional creep-feed grinding,the UVAG causes the reduction of grinding force and the improvement of machined surface quality of Inconel 718 nickel-based superalloy.Furthermore,under the current experimental conditions,the optimal ultrasonic vibration amplitude is determined as 6μm,with which the minimum surface roughness is achieved.
基金the National Natural Science Foundation of China(Grant nos.11772294,11621062)the Fundamental Research Funds for the Central Universities(Grant no.2017QNA4031).
文摘Semiconductor-based electronic devices usually work under multiphysics fields rendering complex electromagnetic-thermo-mechanical coupling.In this work,we develop a penalty function method based on a finite element analysis to tackle this coupling behavior in a metal/semiconductor bilayer plate-the representative unit of semiconductor antenna,which receives strong and pulsed electromagnetic signals.Under these pulses,eddy current is generated,of which the magnitude varies remarkably from one plate to another due to the difference in electrical conductivity.In the concerned system,the metal layer generates much larger current,resulting in the large temperature rise and the nonnegligible Lorentz force,which could lead to delamination and failure of the semiconductor-based electronic device.This study provides theoretical guidance for the design and protection of semiconductor-based electronic devices in complex environments.
文摘The bifurcation behavior of the CO coupling reactor was examined based on the one-dimensional pseudo homogeneous axial dispersion dynamic model. The method of finite difference was used for solving the boundary value problem; the continuation technique and the direct method were applied to determine the bifurcation diagram. The effects of dimensionless adiabatic temperature rise, Damkohler number, activation energy, heat transfer coefficient and feed ratio on the bifurcation behavior were investigated. It was shown that there existed static bifurcation and the oscillations did not occur in the reactor. The result also revealed that the reactor exhibited at most 1-3-1 multiplicity patterns within the range of practical possible parameters and the measures, such as weakening the axial dispersion of reactor, enhancing heat transfer, decreasing the concentration of ethyl nitrite, were efficient for avoiding the possible risk of multiple steady states.
基金supported by the National Natural Science Foundation of China(Nos.12325201,12272140,and 12322201)。
文摘This study investigates the dynamical behavior of two parallel fluid-conveying pipes by developing a non-planar dynamical model of the two pipes coupled with an intermediate spring. A systematic analysis is conducted to evaluate the effects of spring parameters on the non-planar vibration characteristics and buckling behaviors of the coupled system. The nonlinear governing equations are derived with Hamilton's principle,subsequently discretized through Galerkin's method, and finally numerically solved by the Runge-Kutta algorithm. Based on the linearized equations, an eigenvalue analysis is performed to obtain the coupled frequencies, modal shapes, and critical flow velocities for buckling instability. Quantitative assessments further elucidate the effects of the spring position and stiffness coefficient on the coupled frequencies and critical flow velocities.Nonlinear dynamic analyses reveal the evolution of buckling patterns and bifurcation behaviors between the lateral displacements of the two pipes and the flow velocity. Numerical results indicate that the intermediate spring increases the susceptibility to buckling instability in the out-of-plane direction compared with the in-plane direction. Furthermore, synchronized lateral displacements emerge in both pipes when the flow velocity of one pipe exceeds the critical threshold. This work is expected to provide a theoretical foundation for the stability assessment and vibration analysis in coupled fluid-conveying pipe systems.
基金financially supported by the National Natural Science Foundation of China (grants 52301146 and 52275308)the Fundamental Research Funds for the Central Universities (grant 2023JG007)China Postdoctoral Science Foundation (grant 8206300226)。
文摘While the deformation behavior of rare-earth magnesium alloys at high temperatures has been extensively studied,the deformation mechanisms under moderate-to-low temperatures and high strain rates remain insufficiently understood.To address this gap,hot compression tests were conducted on a Mg-11Gd-3Y-0.5Zr(wt.%)alloy over a temperature range of 150℃–450℃under strain rates of 10^(-3) s^(-1)(low strain rate(LSR))and 10 s^(-1)(high strain rate(HSR))to explore the strain rate-temperature coupling effects during hot deformation.The results revealed an anomalous increase in peak stress at 150℃–250℃as the strain rate decreased,attributed to the combined effects of nano-precipitates,dislocation cell structures,and serrated flow induced by dynamic strain aging.At higher temperatures,strain rate influences softening pathways:under HSR at 450℃,the effect of twinning shifts from strengthening to facilitating dynamic recrystallization(DRX),resulting in substantial grain refinement(-4 μm,81%area fraction at a strain of 0.6).In contrast,at LSR,softening is dominated by dynamic recovery at 350℃,with limited DRX(-4 μm grains,10%area fraction at a strain of 0.6)occurs at 400℃.These findings clarify the dual role of twinning and its interaction with rate-temperature conditions,providing valuable insights into optimizing the hot processing of rare-earth magnesium alloys.
基金supported by National Key Research and Development Program"Advanced Structures and Composite Materials"Special Project[Grant No.2024YFB3712800]the Fundamental Research Funds for the Central Universities[Grant No.DUT22-LAB605]Liaoning Province's"Unveiling the List and Leading the Way"Science and Technology Research and Development Special Project[Grant No.2022JH1/10400043]。
文摘Poly(phthalazinone ether sulfone ketone)(PPESK)is a new-generation high-performance thermoplastic resin that exhibits excellent thermal stability and mechanical properties.However,its damage and failure mechanisms under high-temperature and high-strain-rate coupling conditions remain unclear,significantly limiting the engineering applications of PPESK-based composites in extreme environments such as aerospace.To address this issue,in this study,a temperature-controlled split Hopkinson pressure bar experimental platform was developed for dynamic tensile/compressive loading scenarios.Combined with scanning electron microscopy and molecular dynamics simulations,the thermomechanical behavior and failure mechanisms of PPESK were systematically investigated over the temperature range of 293-473 K.The study revealed a novel"dynamic hysteresis brittle behavior"and its underlying"segmental activation±response lag antagonistic mechanism".The results showed that the strain-rate-induced response lag of polymer chain segments significantly weakened the viscous dissipation capacity activated by thermal energy at elevated temperatures.Although high-strain-rate conditions led to notable enhancement in the dynamic strength of the material(with an increase of 8%-233%,reaching 130%-330%at elevated temperatures),the fracture surface morphology tended to become smoother,and brittle fracture characteristics became more pronounced.Based on these findings,a temperature±strain rate hysteresis antagonistic function was constructed,which effectively captured the competitive relationship between temperature-driven relaxation behavior and strain-rateinduced hysteresis in thermoplastic resins.A multiscale damage evolution constitutive model with temperature±rate coupling was subsequently established and numerically implemented via the VUMAT user subroutine.This study not only unveils the nonlinear damage mechanisms of PPESK under combined service temperatures and dynamic/static loading conditions,but also provides a strong theoretical foundation and engineering guidance for the constitutive modeling and parametric design of thermoplastic resin-based materials.
基金Project(52078501)supported by the National Natural Science Foundation of ChinaProject(2022-Major-14)supported by the Science and Technology Research and Development Program Project of China Railway Group LimitedProject(2023ZZTS0342)supported by the Fundamental Research Funds for the Central Universities,China。
文摘Subgrade settlement is a common issue in soil ground within earthquake-prone regions,posing a threat to the safe operation of train-slab track coupled system(TSCS)in high-speed railways(HSRs).This study aims to analyze the mechanical behavior evolution of TSCS under subgrade settlement and earthquake excitation.The refined numerical model of slab track under subgrade differential settlement is established.The short settlement wavelength of 10 m causes the separation between the base and subgrade.The dynamic model of TSCS under subgrade settlement and earthquake excitation is developed.The dynamic response of TSCS exhibits more pronounced fluctuations under the combined effects of subgrade settlement and earthquake excitation than under the effects of settlement or earthquake alone.The evaluation indexes for the running safety of train on slab track under different settlement wavelengths exhibit varying degrees of increase with settlement amplitude and are particularly sensitive to the short settlement wavelength of 10 m.The wheel unloading rate and derailment coefficient of TSCS increase with earthquake intensity.Under the settlement wavelength of 10 m and amplitude of 20 mm,the wheel unloading rate of TSCS exceeds the allowable limit when the earthquake intensity exceeds 0.17g,and the derailment coefficient exceeds the allowable limit when the earthquake intensity surpasses 0.29g.
基金supported by the National Natural Science Foundation of China(Grant No.11374243)
文摘Based on the fact that rubbed groove patterns also affect the anchoring of liquid crystals at substrates,a quartic coupling is included in constructing the surface energy for a liquid crystal cell.The phase diagram and the wetting behaviors of the liquid crystal cell,bounded by surfactant-laden interfaces in a magnetic field perpendicular to the substrate are discussed by taking the quartic coupling into account.The nematic order increases at the surface while it decreases in the bulk as a result of the introduction of quartic substrate-liquid crystal coupling,indicating that the groove anchoring makes the liquid crystal molecules align more orderly near the substrate than away from it.This causes a different wetting behavior：complete wetting.
文摘The dynamical equations for a inertial reciprocating machine excited by two rotating eccentric weights were built by the matrix methodology for establishing dynamical equations of discrete systems. A mathematical model of electromechanical coupling system for the machine was formed by combining the dynamical equations with the state equations of the two motors. The computer simulation to the model was performed for several values of the damping coefficient or the motor power, respectively. The substance of transient behavior of the machine is unveiled by analyzing the results of the computer simulation, and new methods are presented for diminishing the transient amplitude of the vibrating machine and improving the transient behavior. The reliable mathematical model is provided for intelligent control of the transient behavior and engineering design of the equipment.
文摘Dynamic-Relaxation Method (DRM) is applied to studying the influence of compression-bending coupling on nonlinear behavior of cylindrically slightly curved panels of unsymmetric laminated composite materials subjected to uniform uniaxial Compression during loading and unloading. Numerical results are given for cross-ply plates and panels under S4S4 and S4S2 boundary conditions. The results show that the effects of absolute value and the sign of the coupling coefficient on the stability behavior of the panles are significant.
基金supported by the National Natural Science Foundation of China (No.10872220)Japan Society for the Promotion of Science (No.L08538)
文摘The static and kinematic shakedown of a functionally graded （FG） Bree plate is analyzed. The plate is subjected to coupled constant mechanical load and cyclically varying temperature. The material is assumed linearly elastic and nonlinear isotropic hardening with elastic modulus,yield strength and the thermal expansion coeffcient varying exponentially through the thickness of the plate. The boundaries between the shakedown area and the areas of elasticity,incremental collapse and reversed plasticity are determined,respectively. The shakedown of the counterpart made of homogeneous material with average material properties is also analyzed. The comparison between the results obtained in the two cases exhibits distinct qualitative and quantitative difference,indicating the importance of shakedown analysis for FG structures. Since FG structures are usually used in the cases where severe coupled cyclic thermal and mechanical loadings are applied,the approach developed and the results obtained are significant for the analysis and design of such kind of structures.
文摘A mathematical model of electromechanical coupling system for a planar inertial vibrating machine is built by setting up dynamical equations of discrete systems with a matrix methodology proposed. The substance of the transient behavior of the machine is unveiled by analyzing the results of the computer simulation to the model, and new methods are presented for diminishing the transient amplitude of the vibrating machine and improving the transient behavior. The reliable mathematical model is provided for intelligent control of the transient behavior of the equipment.
基金supported by the National Natural Science Foundation of China(12172281,11972284 and 11872303)Fund for Distinguished Young Scholars of Shaanxi Province(2019JC-29)+1 种基金Foundation Strengthening Programme Technical Area Fund(2021-JCJQ-JJ-0565)Fund of the Youth Innovation Team of Shaanxi Universities and the Open Foundation of State Key Laboratory of Structural Analysis of Industrial Equipment(GZ19103).
文摘Although the complex structure-preserving method presented in our previous studies can be used to investigate the orbit–attitude–vibration coupled dynamic behaviors of the spatial flexible damping beam,the simulation speed still needs to be improved.In this paper,the infinite-dimensional dynamic model describing the orbit–attitude–vibration coupled dynamic problem of the spatial flexible damping beam is pretreated by the method of separation of variables,and the second-level fourth-order symplectic Runge–Kutta scheme is constructed to investigate the coupling dynamic behaviors of the spatial flexible damping beam quickly.Compared with the simulation speed of the complex structure-preserving method,the simulation speed of the symplectic Runge–Kutta method is faster,which benefits from the pretreatment step.The effect of the initial radial velocity on the transverse vibration as well as on the attitude evolution of the spatial flexible damping beam is presented in the numerical examples.From the numerical results about the effect of the initial radial velocity,it can be found that the appearance of the initial radial velocity can decrease the vibration frequency of the spatial beam and shorten the evolution interval for the attitude angle to tend towards a stable value significantly.In addition,the validity of the numerical results reported in this paper is verified by comparing with some numerical results presented in our previous studies.
基金Supported by Central Universities Fundamental Research Projects Foundation(11QG22)State Key Laboratory of Automobile Noise Vibration and Safety Projects Foundation(NVHSKL-201105)
文摘A comprehensive model that included mechanical dynamics of the shock absorber coupled with its thermal properties was proposed innovatively.Moreover a thermal-mechanical coupled model which reflected the closed-loop positive feedback system was established by using MATLAB/SIMULINK,and some curves of shock absorber temperature rising characteristic were obtained by simulation ＆computation under several operating modes and different parameters conditions.Research results show that：shock absorber design parameters,external excitations,and thermo-physical properties parameter,such as oil density have effect on the shock absorber temperature rising characteristic.However other thermo-physical properties parameters,such as oil specific heat,cylinder density,cylinder specific heat,and cylinder thermal conductivity,have no effect on it.The results may be used for studying reliability design of the shock absorber.
