In this study, the LiFePO_(4) cathode was synthesized by the ionic thermal method using the deep eutectic mixture of tetramethyl ammonium chloride and urea. The synthetic conditions were systematically investigated by...In this study, the LiFePO_(4) cathode was synthesized by the ionic thermal method using the deep eutectic mixture of tetramethyl ammonium chloride and urea. The synthetic conditions were systematically investigated by orthogonal experiments, which indicate that the optimal reaction time, reaction temperature, molar ratio of Li to DES and rotate speed are 96 h, 220 ℃, 1:14 and20 r·min^(-1), respectively. X-ray diffraction(XRD), scanning electron microscope(SEM) and transmission electron microscope(TEM) were characterized to investigate the crystalline structure and morphology of the obtained materials, indicating well-crystallized LiFePO_(4) with olivine structure. And the physical properties of LiFePO_(4) were explored through Fourier transform infrared spectroscopy(FTIR),57 Fe Mo¨ ssbauer absorption spectra and Raman spectra. An initial discharge capacity can reach 151 m Ah·g^(-1) at 0.1 C rate for LiFePO_(4) following by calcining at 600 ℃ under the optimal conditions, and it retains 125.1 m Ah·g^(-1) after 100 cycles. These results demonstrated that the addition of ionic liquids can improve the rate performance, cycle performance and ion diffusion rate of LiFePO_(4).展开更多
Polycrystalline LuAG:Ce3+(cerium3+-doped lutetium aluminum garnet) powders were prepared by mixed solvo-thermal method.Fourier-transform IR spectroscopy(FTIR) and X-ray diffraction(XRD) measurements showed that the pr...Polycrystalline LuAG:Ce3+(cerium3+-doped lutetium aluminum garnet) powders were prepared by mixed solvo-thermal method.Fourier-transform IR spectroscopy(FTIR) and X-ray diffraction(XRD) measurements showed that the precursors were ethanol derivatives AlO(OH) crystal with hydroxyl and carbonate group.XRD results showed that phase of Lu2O3 disappeared with the precursors were annealed at 400 °C,cubic phase LuAG:Ce3+ appeared but only one diffraction peaks of LuAP(LuAlO3) at calcination temperature to 700 °C,a...展开更多
The finite-element method has been used to study the thermal stress distribution in large-sized sapphire crystals grown with the sapphire growth technique with micro-pulling and shoulder-expanding at cooled center （S...The finite-element method has been used to study the thermal stress distribution in large-sized sapphire crystals grown with the sapphire growth technique with micro-pulling and shoulder-expanding at cooled center （SAPMAC） method. A critical defect model has been established to explain the growth and propagation of cracks during the sapphire growing process. It is demonstrated that the stress field depends on the growth rate, the ambient temperature and the crystallizing direction. High stresses always exist near the growth interfaces, at the shoulder-expanding locations, the tailing locations and the sites where the diameters undergo sharp changes. The maximum stresses always occur at the interface of seeds and crystals. Cracks often form in the critical defect region and spread in the m-planes and a-planes under applied tensile stresses during crystal growth. The experimental results have verified that with the improved system of crystal growth and well-controlled techniques, the large-sized sapphire crystals of high quality can be grown due to absence of cracks.展开更多
For the topology optimization of structures with design-dependent pressure,an intuitive way is to directly describe the loading boundary of the structure,and then update the load on it.However,boundary recognition is ...For the topology optimization of structures with design-dependent pressure,an intuitive way is to directly describe the loading boundary of the structure,and then update the load on it.However,boundary recognition is usually cumbersome and inaccurate.Furthermore,the pressure is always loaded either outside or inside the structure,instead of both.Hence,the inner enclosed and outer open spaces should be distinguished to recognize the loading surfaces.To handle the above issues,a thermal-solid–fluid method for topology optimization with design-dependent pressure load is proposed in this paper.In this method,the specific void phase is defined to be an incompressible hydrostatic fluid,through which the pressure load can be transferred without any needs for special loading surface recognition.The nonlinear-virtual thermal method(N-VTM)is used to distinguish the enclosed and open voids by the temperature difference between the enclosed(with higher temperature)and open(with lower temperature)voids,where the solid areas are treated as the thermal insulation material,and other areas are filled with the self-heating highly thermally conductive material.The mixed displacement–pressure formulation is used to model this solid–fluid problem.The method is easily implemented in the standard density approach and its effectiveness is verified and illustrated by several typical examples at the end of the paper.展开更多
A upconversion nanocrystal of NaYF_(4):Yb/Tm was synthesized successfully by two different methods of solvothermal and hydrothermal,respectively.The properties of the products were characterized and compared.The resul...A upconversion nanocrystal of NaYF_(4):Yb/Tm was synthesized successfully by two different methods of solvothermal and hydrothermal,respectively.The properties of the products were characterized and compared.The results showed that the nanocrystal prepared by hydrothermal method exhibited uniform hexagonal phase and large size,while the nanocrystal prepared by solvothermal method displayed high upconversion luminescence(UCL)and small size.The UCL intensity of the nanocrystal from solvothermal method was higher than that of hydrothermal method.This is the first time to systematically compare the performances of the upconversion nanocrystal prepared by solvothermal and hydrothermal methods,which provides some new insight into the preparation of upconversion nanomaterials with intense UCL and controllable morphology.展开更多
High-speed trains often use temperature sensors to monitor the motion state of bearings.However,the temperature of bearings can be affected by factors such as weather and faults.Therefore,it is necessary to analyze in...High-speed trains often use temperature sensors to monitor the motion state of bearings.However,the temperature of bearings can be affected by factors such as weather and faults.Therefore,it is necessary to analyze in detail the relationship between the bearing temperature and influencing factors.In this study,a dynamics model of the axle box bearing of high-speed trains is established.The model can obtain the contact force between the rollers and raceway and its change law when the bearing contains outer-ring,inner-ring,and rolling-element faults.Based on the model,a thermal network method is introduced to study the temperature field distribution of the axle box bearings of high-speed trains.In this model,the heat generation,conduction,and dispersion of the isothermal nodes can be solved.The results show that the temperature of the contact point between the outer-ring raceway and rolling-elements is the highest.The relationships between the node temperature and the speed,fault type,and fault size are analyzed,finding that the higher the speed,the higher the node temperature.Under different fault types,the node temperature first increases and then decreases as the fault size increases.The effectiveness of the model is demonstrated using the actual temperature data of a high-speed train.This study proposes a thermal network model that can predict the temperature of each component of the bearings on a high-speed train under various speed and fault conditions.展开更多
Condensation and crosslinking reactions of furfuryl alcohol(FA)and FA with tris(2-hydro- xyethyl)isocyanurate(THEIC)are studied by means of DSC,TG,TBA,NMR and elemental analysis. Four exothermic peaks are observed on ...Condensation and crosslinking reactions of furfuryl alcohol(FA)and FA with tris(2-hydro- xyethyl)isocyanurate(THEIC)are studied by means of DSC,TG,TBA,NMR and elemental analysis. Four exothermic peaks are observed on the DSC curves of thermal condensation of FA and FA with THEIC in the presence of sulfuric acid.The peaks Ⅰ,Ⅱ(50—80℃),Ⅲ(110—130℃)and Ⅳ(150— 190℃)correspond to linear polycondensation of FA through head-to-tail condensation,head-to-head etherification,crosslinking dehydration reaction between methylene group and terminal hydroxy group of FA polymeric chain and to further crosslinking reaction at higher temperature,respectively.The reactivity of FA and THEIC increases sharply at 130—150℃ and THEIC is reacted completely at 150℃.Addition of THEIC raises the initial decomposition temperature of FA polymer by 60℃.展开更多
SiC/SiO2 nanochains were synthesized on a carbon fiber substrate by a catalyst-free thermal evaporation method in the Ar/CO atmosphere.X-ray diffraction(XRD),Fourier-transform infrared spectroscopy(FT-IR),scanning ele...SiC/SiO2 nanochains were synthesized on a carbon fiber substrate by a catalyst-free thermal evaporation method in the Ar/CO atmosphere.X-ray diffraction(XRD),Fourier-transform infrared spectroscopy(FT-IR),scanning electron microscopy(SEM)and transmission electron microscopy(TEM)revealed that the as-synthesized SiC/SiO2 nanochains are composed of single-crystalline SiC nanowires and amorphous SiO2 beads.The introduction of CO can promote the formation of SiO2,so that the SiC/SiO2 nanochains are subsequently formed during cooling.In addition,the photoluminescence spectrum of SiC/SiO2 nanochains showed a broad emission peak at around 350 nm,which is ascribed to the oxygen discrepancy in the SiO2 beads as well as the SiC/SiO2 interfacial effect.These findings can provide guidance for further study of the vapor growth of 1D SiC-based materials.展开更多
To solve the problem of temperature rise caused by the high power density of high-speed permanent magnet synchronous traction motors,the temperature rise of various components in the motor is analyzed by coupling the ...To solve the problem of temperature rise caused by the high power density of high-speed permanent magnet synchronous traction motors,the temperature rise of various components in the motor is analyzed by coupling the equivalent thermal circuit method and computational fluid dynamics.Also,a cooling strategy is proposed to solve the problem of temperature rise,which is expected to prolong the service life of these devices.First,the theoretical bases of the approaches used to study heat transfer and fluid mechanics are discussed,then the fluid flow for the considered motor is analyzed,and the equivalent thermal circuit method is introduced for the calculation of the temperature rise.Finally,the stator,rotor loss,motor temperature rise,and the proposed cooling method are also explored through experiments.According to the results,the stator temperature at 50,000 r/min and 60,000 r/min at no-load operation is 68℃ and 76℃,respectively.By monitoring the temperature of the air outlets inside and outside the motor at different speeds,it is also found that the motor reaches a stable temperature rise after 65 min of operation.Coupling of the thermal circuit method and computational fluid dynamics is a strategy that can provide the average temperature rise of each component and can also comprehensively calculate the temperature of each local point.We conclude that a hybrid cooling strategy based on axial air cooling of the inner air duct of the motor and water cooling of the stator can meet the design requirements for the ventilation and cooling of this type of motors.展开更多
A repeatable and simple thermal splicing method for low loss splice between fluoride and silica fibers is presented. The minimum splicing loss of 0.58 dB is achieved experimentally with this approach, Meanwhile, the p...A repeatable and simple thermal splicing method for low loss splice between fluoride and silica fibers is presented. The minimum splicing loss of 0.58 dB is achieved experimentally with this approach, Meanwhile, the power capacity of this splicing joint is also tested with a high power fiber laser. The maximum input power is up to 15 W, only limited by the available power of the laser source. To the best of our knowledge, this is the first report on thermal splicing between fluoride and silica fibers operating in a high power regime without any complicated ion-assisted deposition process.展开更多
Aiming at obtaining high power density of surface-mounted and interior permanent magnet synchronous motor(SIPMSM),it is important to accurately calculate the temperature field distribution of SIPMSM,and a magnetic-the...Aiming at obtaining high power density of surface-mounted and interior permanent magnet synchronous motor(SIPMSM),it is important to accurately calculate the temperature field distribution of SIPMSM,and a magnetic-thermal coupling method is proposed.The magnetic-thermal coupling mechanism is analyzed.The thermal network model and finite element model are built by this method,respectively.The effects of power frequency on iron losses and temperature fields are analyzed by the magnetic-thermal coupling finite element model under the condition of rated load,and the relationship between the load and temperature field is researched under the condition of the synchronous speed.In addition,the equivalent thermal network model is used to verify the magnetic-thermal coupling method.Then the temperatures of various nodes are obtained.The results show that there are advantages in both computational efficiency and accuracy for the proposed coupling method,which can be applied to other permanent magnet motors with complex structures.展开更多
In this paper,the mission and the thermal environment of the Solar Close Observations and Proximity Experiments(SCOPE)spacecraft are analyzed,and an advanced thermal management system(ATMS)is designed for it.The relat...In this paper,the mission and the thermal environment of the Solar Close Observations and Proximity Experiments(SCOPE)spacecraft are analyzed,and an advanced thermal management system(ATMS)is designed for it.The relationship and functions of the integrated database,the intelligent thermal control system and the efficient liquid cooling system in the ATMS are elaborated upon.For the complex thermal field regulation system and extreme space thermal environment,a modular simulation and thermal field planning method are proposed,and the feasibility of the planning algorithm is verified by numerical simulation.A solar array liquid cooling system is developed,and the system simulation results indicate that the temperatures of the solar arrays meet the requirements as the spacecraft flies by perihelion and aphelion.The advanced thermal management study supports the development of the SCOPE program and provides a reference for the thermal management in other deep-space exploration programs.展开更多
Lherzolite is one of the most important components of the subcontinental mantle lithosphere, and the study of its heat transfer properties aids in understanding the thermal structure of the continental mantle lithosph...Lherzolite is one of the most important components of the subcontinental mantle lithosphere, and the study of its heat transfer properties aids in understanding the thermal structure of the continental mantle lithosphere. Currently, few studies have examined the heat transfer properties of lherzolite, and the experimental results remain controversial. This experiment utilized a pulse method to measure the thermal diffusivity of lherzolite at pressures ranging from 1.0 to 4.0 GPa and temperatures from 300 to 1 073 K on a cubic press apparatus. We obtained a thermal diffusivity for lherzolite of approximately 2.10 mm^2s^(-1) at ambient condition. The experimental pressure derivative of the thermal conductivity of lherzolite decreased with temperature, reaching approximately 10% at high temperature, a value higher than the previously reported 4%, which indicates that the temperature gradient of the upper mantle lithosphere is smaller than previously thought. Therefore, concerning calculation of the lithosphere thickness using the thermal conductivity of the lherzolite, the previous calculation using pressure derivative of the thermal conductivity of 4% may cause an underestimation of the upper mantle lithosphere thickness by approximately 6% in a first approximation.展开更多
Consider the finite volume element method for the thermal convection problem with the infinite Prandtl number. The author uses a conforming piecewise linear function on a fine triangulation for velocity and temperatur...Consider the finite volume element method for the thermal convection problem with the infinite Prandtl number. The author uses a conforming piecewise linear function on a fine triangulation for velocity and temperature, and a piecewise constant function on a coarse triangulation for pressure. For general triangulation the optimal order H1 norm error estimates are given.展开更多
The thermal lattice Boltzmann method （TLBM）, which was proposed by J. G. M. Eggels and J. A. Somers previously, has been improved in this paper. The improved method has introduced a new equilibrium solution for the ...The thermal lattice Boltzmann method （TLBM）, which was proposed by J. G. M. Eggels and J. A. Somers previously, has been improved in this paper. The improved method has introduced a new equilibrium solution for the temperature distribution function on the assumption that flow is incompressible, and it can correct the effect of compressibility on the macroscopic temperature computed. Compared to the previous method, where the half- way bounce back boundary condition was used for non-slip velocity and temperature, a non-equilibrium extrapolation scheme has been adopted for both velocity and temperature boundary conditions in this paper. Its second-order accuracy coincides with the ensemble accuracy of lattice Boltzmann method. In order to validate the improved thermal scheme, the natural convection of air in a square cavity is simulated by using this method. The results obtained in the simulation agree very well with the data of other numerical methods and benchmark data. It is indicated that the improved TLBM is also successful for the simulations of non-isothermal flows. Moreover, this thermal scheme can be applied to simulate the natural convection in a non-uniform high magnetic field. The simulation has been completed in a square cavity filled with the aqueous solutions of KC1 （llwt%）, which is considered as a diamagnetic fluid with electrically low-conducting, with Grashof number Gr=4.64~104 and Prandtl number Pr----7.0. And three cases, with different cavity locations in the magnetic field, have been studied. In the presence of a high magnetic field, the natural convection is quenched by the body forces exerted on the electrically low-conducting fluids, such as the magnetization force and the Lorentz force. From the results obtained, it can be seen that the quenching efficiencies decrease with the variation of location from left, symmetrical line, to the right. These phenomena originate from the different distributions of the magnetic field strengths in the zones of the symmetrical central line of the magnetic fields. The results are also compared with those without a magnetic field. Finally, we can conclude that the improved TLBM will enable effective simulation of the natural convection under a high magnetic field.展开更多
The experimental results of the thermal conductivities of xonotlite-type calcium silicate insulation materials were presented at different temperatures and pressures. Two appropriative surroundings, i.e. an elevated t...The experimental results of the thermal conductivities of xonotlite-type calcium silicate insulation materials were presented at different temperatures and pressures. Two appropriative surroundings, i.e. an elevated temperature surrounding from ambient temperature to 1450 K and a vacuum surrounding from atmosphere pressure to 10-3 Pa, were designed for the transient hot-strip （THS） method. The thermal conductivities of xonotlite-type calcium silicate with four densities from ambient temperature to 1000 K and 0.045 Pa to atmospheric pressure were measured. The results show that the thermal conductivity of xonotlite-type calcium silicate decreases apparently with the fall of density, and decreases apparently with the drop of pressure, and reaches the least value at about 100 Pa. The thermal conductivity of xonotlite-type calcium silicate increases almost linearly with T0, and increases more abundantly with low density than with high density. The thermal conductivity measurement uncertainty is estimated to be approximately 3% at ambient temperature, and 6% at 800 K.展开更多
A steady-state thermal hybrid element model is proposed to calculate particle-reinforced composites divided by an improved quadtree mesh.The functional of hybrid flux finite element method(HF-FEM)is constructed using ...A steady-state thermal hybrid element model is proposed to calculate particle-reinforced composites divided by an improved quadtree mesh.The functional of hybrid flux finite element method(HF-FEM)is constructed using the weighted residual method.This functional independently assumes a heat flux field in the cell domain and a temperature field along cell boundaries.The construction of a universal heat flux function is put forward,which is approximated by a complete polynomial,and the temperature at the cell boundary is obtained by linear interpolation.Also,the hybrid stress finite element method(HS-FEM)is constructed to solve the thermal stress.In this paper,an improved quadtree grid that can accurately describe the shape of elliptical inclusions is built.By comparing several numerical examples with the traditional FEM,it is demonstrated that the hybrid element of the thermal analysis proposed in this paper is practical.展开更多
基金financially supported by the National Natural Science Foundation of China (Nos. 51674068,51874079, 51804035 and 11775226)the Natural Science Foundation of Hebei Province (No. E2018501091)+2 种基金Hebei Province Key Research and Development Plan Project (No. 19211302D)the Fundamental Research Funds for the Central Universities (Nos. N172302001,N182306001, N182312007, N182304018 and N2023040)Research Project on Distribution of Heavy Metals in Soil and Comprehensive Utilization Technology of Tailings in Typical Iron Tailing Reservoir Areas of Hebei Province (No. 802060671901)。
文摘In this study, the LiFePO_(4) cathode was synthesized by the ionic thermal method using the deep eutectic mixture of tetramethyl ammonium chloride and urea. The synthetic conditions were systematically investigated by orthogonal experiments, which indicate that the optimal reaction time, reaction temperature, molar ratio of Li to DES and rotate speed are 96 h, 220 ℃, 1:14 and20 r·min^(-1), respectively. X-ray diffraction(XRD), scanning electron microscope(SEM) and transmission electron microscope(TEM) were characterized to investigate the crystalline structure and morphology of the obtained materials, indicating well-crystallized LiFePO_(4) with olivine structure. And the physical properties of LiFePO_(4) were explored through Fourier transform infrared spectroscopy(FTIR),57 Fe Mo¨ ssbauer absorption spectra and Raman spectra. An initial discharge capacity can reach 151 m Ah·g^(-1) at 0.1 C rate for LiFePO_(4) following by calcining at 600 ℃ under the optimal conditions, and it retains 125.1 m Ah·g^(-1) after 100 cycles. These results demonstrated that the addition of ionic liquids can improve the rate performance, cycle performance and ion diffusion rate of LiFePO_(4).
基金supported by National Natural Science Foundation of China (10774140)Knowledge Innovation Project of the Chinese Academy of Sciences (KJCX2-YW-M11)+1 种基金Specialized Research Fund for the Doctoral Program of Higher Education (20060358054)Special Foundation for Talents of Anhui Province,China (2007Z021)
文摘Polycrystalline LuAG:Ce3+(cerium3+-doped lutetium aluminum garnet) powders were prepared by mixed solvo-thermal method.Fourier-transform IR spectroscopy(FTIR) and X-ray diffraction(XRD) measurements showed that the precursors were ethanol derivatives AlO(OH) crystal with hydroxyl and carbonate group.XRD results showed that phase of Lu2O3 disappeared with the precursors were annealed at 400 °C,cubic phase LuAG:Ce3+ appeared but only one diffraction peaks of LuAP(LuAlO3) at calcination temperature to 700 °C,a...
基金National Defence Pre-research Foundation of China (41312040404)
文摘The finite-element method has been used to study the thermal stress distribution in large-sized sapphire crystals grown with the sapphire growth technique with micro-pulling and shoulder-expanding at cooled center （SAPMAC） method. A critical defect model has been established to explain the growth and propagation of cracks during the sapphire growing process. It is demonstrated that the stress field depends on the growth rate, the ambient temperature and the crystallizing direction. High stresses always exist near the growth interfaces, at the shoulder-expanding locations, the tailing locations and the sites where the diameters undergo sharp changes. The maximum stresses always occur at the interface of seeds and crystals. Cracks often form in the critical defect region and spread in the m-planes and a-planes under applied tensile stresses during crystal growth. The experimental results have verified that with the improved system of crystal growth and well-controlled techniques, the large-sized sapphire crystals of high quality can be grown due to absence of cracks.
基金support to this work by the National Natural Science Foundation of China (Grant Nos.U1808215 and 11821202)the 111 Project (B14013)the Fundamental Research Funds for the Central Universities of China (DUT21GF101).
文摘For the topology optimization of structures with design-dependent pressure,an intuitive way is to directly describe the loading boundary of the structure,and then update the load on it.However,boundary recognition is usually cumbersome and inaccurate.Furthermore,the pressure is always loaded either outside or inside the structure,instead of both.Hence,the inner enclosed and outer open spaces should be distinguished to recognize the loading surfaces.To handle the above issues,a thermal-solid–fluid method for topology optimization with design-dependent pressure load is proposed in this paper.In this method,the specific void phase is defined to be an incompressible hydrostatic fluid,through which the pressure load can be transferred without any needs for special loading surface recognition.The nonlinear-virtual thermal method(N-VTM)is used to distinguish the enclosed and open voids by the temperature difference between the enclosed(with higher temperature)and open(with lower temperature)voids,where the solid areas are treated as the thermal insulation material,and other areas are filled with the self-heating highly thermally conductive material.The mixed displacement–pressure formulation is used to model this solid–fluid problem.The method is easily implemented in the standard density approach and its effectiveness is verified and illustrated by several typical examples at the end of the paper.
基金funded partially by the National Natural Science Foundation of China(No.21271126)National 973 Program(No.2010CB933901)Shanghai Leading Academic Discipline Project(No.S30109).
文摘A upconversion nanocrystal of NaYF_(4):Yb/Tm was synthesized successfully by two different methods of solvothermal and hydrothermal,respectively.The properties of the products were characterized and compared.The results showed that the nanocrystal prepared by hydrothermal method exhibited uniform hexagonal phase and large size,while the nanocrystal prepared by solvothermal method displayed high upconversion luminescence(UCL)and small size.The UCL intensity of the nanocrystal from solvothermal method was higher than that of hydrothermal method.This is the first time to systematically compare the performances of the upconversion nanocrystal prepared by solvothermal and hydrothermal methods,which provides some new insight into the preparation of upconversion nanomaterials with intense UCL and controllable morphology.
基金National Key R&D Program(Grant No.2020YFB2007700),National Natural Science Foundation of China(Grant Nos.11790282,12032017,12002221 and 11872256)S&T Program of Hebei(Grant No.20310803D)+1 种基金Natural Science Foundation of Hebei Province(Grant No.A2020210028)State Foundation for Studying Abroad.
文摘High-speed trains often use temperature sensors to monitor the motion state of bearings.However,the temperature of bearings can be affected by factors such as weather and faults.Therefore,it is necessary to analyze in detail the relationship between the bearing temperature and influencing factors.In this study,a dynamics model of the axle box bearing of high-speed trains is established.The model can obtain the contact force between the rollers and raceway and its change law when the bearing contains outer-ring,inner-ring,and rolling-element faults.Based on the model,a thermal network method is introduced to study the temperature field distribution of the axle box bearings of high-speed trains.In this model,the heat generation,conduction,and dispersion of the isothermal nodes can be solved.The results show that the temperature of the contact point between the outer-ring raceway and rolling-elements is the highest.The relationships between the node temperature and the speed,fault type,and fault size are analyzed,finding that the higher the speed,the higher the node temperature.Under different fault types,the node temperature first increases and then decreases as the fault size increases.The effectiveness of the model is demonstrated using the actual temperature data of a high-speed train.This study proposes a thermal network model that can predict the temperature of each component of the bearings on a high-speed train under various speed and fault conditions.
基金This project is supported by the National Natural Science Foundation of China.
文摘Condensation and crosslinking reactions of furfuryl alcohol(FA)and FA with tris(2-hydro- xyethyl)isocyanurate(THEIC)are studied by means of DSC,TG,TBA,NMR and elemental analysis. Four exothermic peaks are observed on the DSC curves of thermal condensation of FA and FA with THEIC in the presence of sulfuric acid.The peaks Ⅰ,Ⅱ(50—80℃),Ⅲ(110—130℃)and Ⅳ(150— 190℃)correspond to linear polycondensation of FA through head-to-tail condensation,head-to-head etherification,crosslinking dehydration reaction between methylene group and terminal hydroxy group of FA polymeric chain and to further crosslinking reaction at higher temperature,respectively.The reactivity of FA and THEIC increases sharply at 130—150℃ and THEIC is reacted completely at 150℃.Addition of THEIC raises the initial decomposition temperature of FA polymer by 60℃.
基金Project(U19A2088)supported by the National Natural Science Foundation of ChinaProject(2019RS2058)supported by the Special Fund for Innovative Construction of Hunan Province,China。
文摘SiC/SiO2 nanochains were synthesized on a carbon fiber substrate by a catalyst-free thermal evaporation method in the Ar/CO atmosphere.X-ray diffraction(XRD),Fourier-transform infrared spectroscopy(FT-IR),scanning electron microscopy(SEM)and transmission electron microscopy(TEM)revealed that the as-synthesized SiC/SiO2 nanochains are composed of single-crystalline SiC nanowires and amorphous SiO2 beads.The introduction of CO can promote the formation of SiO2,so that the SiC/SiO2 nanochains are subsequently formed during cooling.In addition,the photoluminescence spectrum of SiC/SiO2 nanochains showed a broad emission peak at around 350 nm,which is ascribed to the oxygen discrepancy in the SiO2 beads as well as the SiC/SiO2 interfacial effect.These findings can provide guidance for further study of the vapor growth of 1D SiC-based materials.
文摘To solve the problem of temperature rise caused by the high power density of high-speed permanent magnet synchronous traction motors,the temperature rise of various components in the motor is analyzed by coupling the equivalent thermal circuit method and computational fluid dynamics.Also,a cooling strategy is proposed to solve the problem of temperature rise,which is expected to prolong the service life of these devices.First,the theoretical bases of the approaches used to study heat transfer and fluid mechanics are discussed,then the fluid flow for the considered motor is analyzed,and the equivalent thermal circuit method is introduced for the calculation of the temperature rise.Finally,the stator,rotor loss,motor temperature rise,and the proposed cooling method are also explored through experiments.According to the results,the stator temperature at 50,000 r/min and 60,000 r/min at no-load operation is 68℃ and 76℃,respectively.By monitoring the temperature of the air outlets inside and outside the motor at different speeds,it is also found that the motor reaches a stable temperature rise after 65 min of operation.Coupling of the thermal circuit method and computational fluid dynamics is a strategy that can provide the average temperature rise of each component and can also comprehensively calculate the temperature of each local point.We conclude that a hybrid cooling strategy based on axial air cooling of the inner air duct of the motor and water cooling of the stator can meet the design requirements for the ventilation and cooling of this type of motors.
基金Supported by the National Natural Science Foundation of China under Grant No 61275144the Innovative Research and Development Project of Nanshan District under Grant No KC2013JSCX0013A+1 种基金the Shenzhen Science and Technology Innovation Projects under Grant No JCYJ20150324140036862the Funding from Shenzhen University under Grant No 00008355
文摘A repeatable and simple thermal splicing method for low loss splice between fluoride and silica fibers is presented. The minimum splicing loss of 0.58 dB is achieved experimentally with this approach, Meanwhile, the power capacity of this splicing joint is also tested with a high power fiber laser. The maximum input power is up to 15 W, only limited by the available power of the laser source. To the best of our knowledge, this is the first report on thermal splicing between fluoride and silica fibers operating in a high power regime without any complicated ion-assisted deposition process.
基金This work was supported by Natural Science Foundation of China(Item number:51777060,U1361109)Natural Science Foundation of Henan province(Item number:162300410117)the he innovative research team plan of Henan Polytechnic University(Item number:T2015-2).
文摘Aiming at obtaining high power density of surface-mounted and interior permanent magnet synchronous motor(SIPMSM),it is important to accurately calculate the temperature field distribution of SIPMSM,and a magnetic-thermal coupling method is proposed.The magnetic-thermal coupling mechanism is analyzed.The thermal network model and finite element model are built by this method,respectively.The effects of power frequency on iron losses and temperature fields are analyzed by the magnetic-thermal coupling finite element model under the condition of rated load,and the relationship between the load and temperature field is researched under the condition of the synchronous speed.In addition,the equivalent thermal network model is used to verify the magnetic-thermal coupling method.Then the temperatures of various nodes are obtained.The results show that there are advantages in both computational efficiency and accuracy for the proposed coupling method,which can be applied to other permanent magnet motors with complex structures.
文摘In this paper,the mission and the thermal environment of the Solar Close Observations and Proximity Experiments(SCOPE)spacecraft are analyzed,and an advanced thermal management system(ATMS)is designed for it.The relationship and functions of the integrated database,the intelligent thermal control system and the efficient liquid cooling system in the ATMS are elaborated upon.For the complex thermal field regulation system and extreme space thermal environment,a modular simulation and thermal field planning method are proposed,and the feasibility of the planning algorithm is verified by numerical simulation.A solar array liquid cooling system is developed,and the system simulation results indicate that the temperatures of the solar arrays meet the requirements as the spacecraft flies by perihelion and aphelion.The advanced thermal management study supports the development of the SCOPE program and provides a reference for the thermal management in other deep-space exploration programs.
基金sponsored by the National Natural Science Foundation of China (No. 41504072)the "135" Program of Institute of Geochemistry, Chinese Academy of Sciences (CAS) and State Key Laboratory of Earthquake Dynamics
文摘Lherzolite is one of the most important components of the subcontinental mantle lithosphere, and the study of its heat transfer properties aids in understanding the thermal structure of the continental mantle lithosphere. Currently, few studies have examined the heat transfer properties of lherzolite, and the experimental results remain controversial. This experiment utilized a pulse method to measure the thermal diffusivity of lherzolite at pressures ranging from 1.0 to 4.0 GPa and temperatures from 300 to 1 073 K on a cubic press apparatus. We obtained a thermal diffusivity for lherzolite of approximately 2.10 mm^2s^(-1) at ambient condition. The experimental pressure derivative of the thermal conductivity of lherzolite decreased with temperature, reaching approximately 10% at high temperature, a value higher than the previously reported 4%, which indicates that the temperature gradient of the upper mantle lithosphere is smaller than previously thought. Therefore, concerning calculation of the lithosphere thickness using the thermal conductivity of the lherzolite, the previous calculation using pressure derivative of the thermal conductivity of 4% may cause an underestimation of the upper mantle lithosphere thickness by approximately 6% in a first approximation.
基金Supported by National Natural Science Foundation of China(10071044)the Research Fund of Doctoral Program of High Education by State Education Ministry of China.
文摘Consider the finite volume element method for the thermal convection problem with the infinite Prandtl number. The author uses a conforming piecewise linear function on a fine triangulation for velocity and temperature, and a piecewise constant function on a coarse triangulation for pressure. For general triangulation the optimal order H1 norm error estimates are given.
基金Project supported by the National Natural Science Foundation of China (Grant No 10772150)the Aeronautical Science Fund of China (Grant No 20061453020)Foundation for Basic Research of Northwestern Polytechnical University
文摘The thermal lattice Boltzmann method （TLBM）, which was proposed by J. G. M. Eggels and J. A. Somers previously, has been improved in this paper. The improved method has introduced a new equilibrium solution for the temperature distribution function on the assumption that flow is incompressible, and it can correct the effect of compressibility on the macroscopic temperature computed. Compared to the previous method, where the half- way bounce back boundary condition was used for non-slip velocity and temperature, a non-equilibrium extrapolation scheme has been adopted for both velocity and temperature boundary conditions in this paper. Its second-order accuracy coincides with the ensemble accuracy of lattice Boltzmann method. In order to validate the improved thermal scheme, the natural convection of air in a square cavity is simulated by using this method. The results obtained in the simulation agree very well with the data of other numerical methods and benchmark data. It is indicated that the improved TLBM is also successful for the simulations of non-isothermal flows. Moreover, this thermal scheme can be applied to simulate the natural convection in a non-uniform high magnetic field. The simulation has been completed in a square cavity filled with the aqueous solutions of KC1 （llwt%）, which is considered as a diamagnetic fluid with electrically low-conducting, with Grashof number Gr=4.64~104 and Prandtl number Pr----7.0. And three cases, with different cavity locations in the magnetic field, have been studied. In the presence of a high magnetic field, the natural convection is quenched by the body forces exerted on the electrically low-conducting fluids, such as the magnetization force and the Lorentz force. From the results obtained, it can be seen that the quenching efficiencies decrease with the variation of location from left, symmetrical line, to the right. These phenomena originate from the different distributions of the magnetic field strengths in the zones of the symmetrical central line of the magnetic fields. The results are also compared with those without a magnetic field. Finally, we can conclude that the improved TLBM will enable effective simulation of the natural convection under a high magnetic field.
基金supported by the National Natural Science Foundation of China (No.50806021)
文摘The experimental results of the thermal conductivities of xonotlite-type calcium silicate insulation materials were presented at different temperatures and pressures. Two appropriative surroundings, i.e. an elevated temperature surrounding from ambient temperature to 1450 K and a vacuum surrounding from atmosphere pressure to 10-3 Pa, were designed for the transient hot-strip （THS） method. The thermal conductivities of xonotlite-type calcium silicate with four densities from ambient temperature to 1000 K and 0.045 Pa to atmospheric pressure were measured. The results show that the thermal conductivity of xonotlite-type calcium silicate decreases apparently with the fall of density, and decreases apparently with the drop of pressure, and reaches the least value at about 100 Pa. The thermal conductivity of xonotlite-type calcium silicate increases almost linearly with T0, and increases more abundantly with low density than with high density. The thermal conductivity measurement uncertainty is estimated to be approximately 3% at ambient temperature, and 6% at 800 K.
基金supported by the National Natural Science Foundation of China(Grant Nos.12062007 and 12072135).
文摘A steady-state thermal hybrid element model is proposed to calculate particle-reinforced composites divided by an improved quadtree mesh.The functional of hybrid flux finite element method(HF-FEM)is constructed using the weighted residual method.This functional independently assumes a heat flux field in the cell domain and a temperature field along cell boundaries.The construction of a universal heat flux function is put forward,which is approximated by a complete polynomial,and the temperature at the cell boundary is obtained by linear interpolation.Also,the hybrid stress finite element method(HS-FEM)is constructed to solve the thermal stress.In this paper,an improved quadtree grid that can accurately describe the shape of elliptical inclusions is built.By comparing several numerical examples with the traditional FEM,it is demonstrated that the hybrid element of the thermal analysis proposed in this paper is practical.
