Efficient tool condition monitoring techniques help to realize intelligent management of tool life and reduce tool usage costs.In this paper,the influence of different wear degrees of ball-end milling cutters on the t...Efficient tool condition monitoring techniques help to realize intelligent management of tool life and reduce tool usage costs.In this paper,the influence of different wear degrees of ball-end milling cutters on the texture shape of machining tool marks is investigated,and a method is proposed for predicting the wear state(including the position and degree of tool wear)of ball-end milling cutters based on entropy measurement of tool mark texture images.Firstly,data samples are prepared through wear experiments,and the change law of the tool mark texture shape with the tool wear state is analyzed.Then,a two-dimensional sample entropy algorithm is developed to quantify the texture morphology.Finally,the processing parameters and tool attitude are integrated into the prediction process to predict the wear value and wear position of the ball end milling cutter.After testing,the correlation between the predicted value and the standard value of the proposed tool condition monitoring method reaches 95.32%,and the accuracy reaches 82.73%,indicating that the proposed method meets the requirement of tool condition monitoring.展开更多
The purpose of the research is to develop a universal algorithm for partial texture segmentation of any visual images. The main peculiarity of the proposed segmentation procedure is the extraction of only homogeneous ...The purpose of the research is to develop a universal algorithm for partial texture segmentation of any visual images. The main peculiarity of the proposed segmentation procedure is the extraction of only homogeneous fine-grained texture segments present in the images. At first, an initial seed point is found for the largest and most homogeneous segment of the image. This initial seed point of the segment is expanded using a region growing method. Other texture segments of the image are extracted analogously in turn. At the second stage, the procedure of merging the extracted segments belonging to the same texture class is performed. Then, the detected texture segments are input to a neural network with competitive layers which accomplishe</span><span style="font-family:Verdana;">s</span><span style="font-family:""><span style="font-family:Verdana;"> more accurate delineation of the shapes of the extracted texture segments. The proposed segmentation procedure is fully unsupervised, <i></span><i><span style="font-family:Verdana;">i.e.</span></i><span style="font-family:Verdana;"></i>, it does not use any a priori knowledge on either the type of textures or the number of texture segments in the image. The research results in development of the segmentation algorithm realized as a computer program tested in a series of experiments that demonstrate its efficiency on grayscale natural scenes.展开更多
The textures and microstructures of hot-and cold-rolled sheets of an AA 5454 aluminium alloy were studied,with special attention paid to comparing the texture development for the symmetric and asymmetric cold rolling....The textures and microstructures of hot-and cold-rolled sheets of an AA 5454 aluminium alloy were studied,with special attention paid to comparing the texture development for the symmetric and asymmetric cold rolling.Scanning electron microscopy with electron-backscatter diffraction was used to monitor the development of the microstructure in the differently deformed and additionally annealed samples.Details of the formations and transformations of individual texture components occurring during the rolling processes were observed and discussed.The average grain sizes,textures and mechanical properties were correlated and explained for the symmetric and asymmetric cold-rolled samples.The asymmetric rolling is beneficial in terms of deep drawability because it reduces the planar anisotropy of the annealed material due to the decrease of the Cube,Goss,rotated-Cube and η-fibre texture components and at the same time strengthens X1-and X2-fibre texture components which are shear texture components and improve deep drawability.During the asymmetric cold rolling,the temperature increases due to friction,triggering recrystallisation processes and leading to larger grains.It is also confirmed that asymmetric cold rolling uses less rolling force and consequently less energy to produce a final material with better formability,particularly earing.展开更多
Hot deformation with high strain rate has been paid more attention due to its high efficiency and low cost,however,the strain rate dependent dynamic recrystallization(DRX)and texture evolution in hot deformation proce...Hot deformation with high strain rate has been paid more attention due to its high efficiency and low cost,however,the strain rate dependent dynamic recrystallization(DRX)and texture evolution in hot deformation process,which affect the formability of metals,are lack of study.In this work,the DRX behavior and texture evolution of Mg-8Gd-1Er-0.5Zr alloy hot compressed with strain rates of 0.1 s^(−1),1 s^(−1),10 s^(−1) and 50 s^(−1) are studied,and the corresponding dominant mechanisms for DRX and texture weakening are discussed.Results indicated the DRX fraction was 20%and the whole texture intensity was 16.89 MRD when the strain rate was 0.1 s^(−1),but they were 76%and 6.55 MRD,respectively,when the strain rate increased to 50 s^(−1).The increment of DRX fraction is suggested to result from the reduced DRX critical strain and the increased dislocation density as well as velocity,while the weakened whole texture is attributed to the increased DRX grains.At the low strain rate of 0.1 s^(−1),discontinuous DRX(DDRX)was the dominant,but the whole texture was controlled by the deformed grains with the preferred orientation of{0001}⊥CD,because the number of DDRX grains was limited.At the high strain rate of 50 s^(−1),continuous DRX(CDRX)and twin-induced DRX(TDRX)were promoted,and more DRX grains resulted in orientation randomization.The whole texture was mainly weakened by CDRX and TDRX grains,in which CDRX plays a major role.The results of present work are significant for understanding the hot workability of Mg-RE alloys with a high strain rate.展开更多
Conventional rolled Mg-Al alloy sheets typically exhibit strong basal textures that remain and may even strengthen after recrystallization annealing due to the preferential growth of basal-oriented grains,resulting in...Conventional rolled Mg-Al alloy sheets typically exhibit strong basal textures that remain and may even strengthen after recrystallization annealing due to the preferential growth of basal-oriented grains,resulting in poor formability at room temperature.Therefore,the knowledge of recrystallization and grain growth is critical for modifying textures of Mg-Al alloy sheets.The static recrystallization and texture evolution in a cold-rolled dilute Mg-1Al(wt.%)alloy during various annealed temperatures ranging from 300℃ to 450℃,have been investigated using the quasi in-situ electron backscatter diffraction(EBSD)method.The as-rolled Mg-1Al alloy shows a dominant basal texture,which weakens and broadens in the rolling direction(RD)during the subsequent annealing,accompanied by the formation of{1010}texture component.Particularly,the {1010} texture component is more pronounced after annealing at high temperatures.The quasi in-situ EBSD results show that recrystallized grains are mainly induced by shear bands,which exhibit a wide spectrum of orientations with c-axis tilt angles ranging 20°-45°from the normal direction(ND).Orientations of shear band-induced recrystallized grains are retained during the entire recrystallization process,resulting in a reduction in the texture intensity.Moreover,recrystallized grains belonging to the {1010}texture component grow preferentially compared to those with other orientations,which is attributed to low energy grain boundaries,especially grain boundaries with∼30°misorientation angles.Furthermore,the high temperature annealing facilitates the rapid growth of grain boundaries having a 30°misorientation angle,leading to the occurrence of distinct {1010} texture after annealing at 450℃ for 1 h.The results provide insights for texture modification of rare earth-free low-alloyed Mg alloys by controlling annealing parameters.展开更多
7039 Al alloys are widely used in armor vehicles,given the material’s high specific strength and fracture toughness.However,laminar tearing in the thickness plane of the base metal(BM),specifically in the normal dire...7039 Al alloys are widely used in armor vehicles,given the material’s high specific strength and fracture toughness.However,laminar tearing in the thickness plane of the base metal(BM),specifically in the normal direction(ND)and rolling direction(RD)plane,was occasionally observed after the welding of thick plates,resulting in premature material failure.A vertically metal-inert gas(MIG)-welded laminar tearing component of a 30 mm thick plate was analyzed to determine the factors associated with this phenomenon.The texture,residual stress,microhardness,and tensile properties were also investigated.The results indicated that the crack extended along the RD as a transcrystalline fracture and terminated at the BM.The grains near the crack grew preferentially in the(001)crystal direction.Furthermore,the tensile strength(83 MPa)and elongation(6.8%)in the RD were relatively higher than those in the ND.In particular,the primary factors for crack initiation include stronger texture,higher dislocation density,increased Al_(7)Cu_(2)Fe phases,lower proportion of small-angle grain boundaries,and varying grain sizes in different regions,leading to the fragile microstructure.The higher residual stress of the BM promotes the formation and extension of cracks.The restraining force due to fixation and welding shrinkage force transformed the crack into laminar tearing.Preventive measures of laminar tearing were also proposed.展开更多
Ecological monitoring vehicles are equipped with a range of sensors and monitoring devices designed to gather data on ecological and environmental factors.These vehicles are crucial in various fields,including environ...Ecological monitoring vehicles are equipped with a range of sensors and monitoring devices designed to gather data on ecological and environmental factors.These vehicles are crucial in various fields,including environmental science research,ecological and environmental monitoring projects,disaster response,and emergency management.A key method employed in these vehicles for achieving high-precision positioning is LiDAR(lightlaser detection and ranging)-Visual Simultaneous Localization and Mapping(SLAM).However,maintaining highprecision localization in complex scenarios,such as degraded environments or when dynamic objects are present,remains a significant challenge.To address this issue,we integrate both semantic and texture information from LiDAR and cameras to enhance the robustness and efficiency of data registration.Specifically,semantic information simplifies the modeling of scene elements,reducing the reliance on dense point clouds,which can be less efficient.Meanwhile,visual texture information complements LiDAR-Visual localization by providing additional contextual details.By incorporating semantic and texture details frompaired images and point clouds,we significantly improve the quality of data association,thereby increasing the success rate of localization.This approach not only enhances the operational capabilities of ecological monitoring vehicles in complex environments but also contributes to improving the overall efficiency and effectiveness of ecological monitoring and environmental protection efforts.展开更多
Impact of texture type on the magnetic properties of ultrahigh density perpendicular magnetic recording media L1_(0)-FePt thin film was investigated,so were the texture formation and evolution mechanism.Reuss,Voigt,an...Impact of texture type on the magnetic properties of ultrahigh density perpendicular magnetic recording media L1_(0)-FePt thin film was investigated,so were the texture formation and evolution mechanism.Reuss,Voigt,and Hill models were used to determine the anisotropic elastic modulus of L1_(0)-FePt thin film with fiber texture.Then,the elastic strain energies of thin films under various stress conditions were calculated.Results reveal that the stress condition has a significant influence on the fiber texture evolution.When the L1_(0)-FePt thin film is subjected to compressive in-plane strain prior to ordering phase transformation,the formation of{100}fiber texture is promoted.On the contrary,the ordering phase transformation under tensile in-plane strain promotes the{001}fiber texture formation.展开更多
This study investigates the influence of initial crystallographic texture on the deformation mechanisms during three-point bending of AZ31 Mg alloy sheets.Three distinct orientations are examined by using the followin...This study investigates the influence of initial crystallographic texture on the deformation mechanisms during three-point bending of AZ31 Mg alloy sheets.Three distinct orientations are examined by using the following bending specimens:(i)the normal direction(ND)sample,where the c-axes are predominantly aligned along the specimen thickness,(ii)the rolling direction(RD)sample,where the c-axes are mostly aligned along the longitudinal direction,and(iii)the 45 sample,where the c-axes are tilted at approximately 45°from both the thickness and longitudinal directions.The bending properties vary significantly depending on the initial texture,thereby affecting the strain accommodation and dominant deformation modes.The ND sample exhibits the lowest bendability due to its unfavorable orientation for{10–12}extension twinning and basal slip,which results in poor strain accommodation and early crack initiation in the outer tensile side.By comparison,the RD sample demonstrates an approximately 22.1%improvement,with extensive{10–12}extension twinning in the outer tensile zone.Meanwhile,the 45 sample exhibits the highest bendability(approximately 75.7%greater than that of the ND sample)due to sustained activation of both basal slip and{10–12}extension twinning,promoting uniform strain distribution and delaying fracture.Detailed electron backscatter diffraction analysis reveals that the 45 sample retains favorable crystallographic orientations for basal slip throughout bending,minimizing strain localization and enhancing the bendability.These findings highlight the importance of tailoring the initial texture in order to optimize the bending properties of Mg alloy sheets,and provide valuable insights for improving the manufacturability of Mg-based structural components.展开更多
In this work,a good balance of strength and ductility(a yield strength of 185 MPa and a uniform elongation of 20%)has been obtained in a dilute Mg-1.8Zn-0.3Y-0.3Ca-0.3Zr(wt.%)alloy using hard plate rolling(HPR)followe...In this work,a good balance of strength and ductility(a yield strength of 185 MPa and a uniform elongation of 20%)has been obtained in a dilute Mg-1.8Zn-0.3Y-0.3Ca-0.3Zr(wt.%)alloy using hard plate rolling(HPR)followed by annealing,with a low anisotropy in mechanical properties.More importantly,the HPR-annealed alloy shows an excellent formability at the same time,i.e.,the index Erichsen(I.E.)value reaches 7.9 mm(the Erichsen cupping test)at room temperature,which is higher compared with the Mg-1.8Zn-0.3Y-0.3Ca0.3Zr alloy produced by conventional multi-pass rolling(CR)followed by annealing.The excellent synergy of strength and formability of the HPR-annealed alloy is mainly attributed to a weak elliptical ring texture,as well as finer and denser Zn_(2)Zr_(3)precipitates.The formation of weak elliptical ring texture is related to the preferential co-segregation of Zn and Ca elements at boundaries of basal grains with smal misorientation angles during annealing,which inhibits the growth of basal grains and promotes the preferential growth of non-basal grains At the same time,in comparison with the CR-annealed alloy,the HPR-annealed alloy contains finer and denser Zn_(2)Zr_(3)precipitates that ar less likely to become sources of cracks,leading to the higher strength and formability of the HPR-annealed alloy.The results in this work can provide reference for the development of high strength Mg alloy sheets with excellent room temperature formability,which also shed light on mitigating planar anisotropy in mechanical properties for Mg alloy sheets.展开更多
Background Three-dimensional terrain models are essential in domains such as video game development and film production.Because surface color is often correlated with terrain geometry,capturing this relationship is cr...Background Three-dimensional terrain models are essential in domains such as video game development and film production.Because surface color is often correlated with terrain geometry,capturing this relationship is critical for generating realistic results.However,most existing methods synthesize either a heightmap or a texture without adequately modeling their inherent correlation.Methods We propose a method that jointly generates terrain heightmaps and textures using a latent diffusion model.First,we train the model in an unsupervised manner to randomly generate paired heightmaps and textures.Then,we perform supervised learning on an external adapter to enable user control via hand-drawn sketches.Results Experiments demonstrate that our approach supports intuitive terrain generation while preserving the correlation between heightmaps and textures.Conclusion Our method outperforms the two-stage and GAN-based baselines by ensuring structural coherence,in which textures naturally align with geometry,successfully accommodating both realistic landscapes and extreme user-defined shapes.展开更多
Crystallographic texture engineering is a key strategy for enhancing the mechanical properties of polycrystalline magnesium(Mg)alloys.Due to the intrinsic anisotropy of the hexagonal close-packed(HCP)structure,the def...Crystallographic texture engineering is a key strategy for enhancing the mechanical properties of polycrystalline magnesium(Mg)alloys.Due to the intrinsic anisotropy of the hexagonal close-packed(HCP)structure,the deformation behavior of Mg alloys is significantly governed by individual grain deformation and multi-grain interactions,both dictated by crystallographic texture.In the current study,enhanced ductility was achieved in a Mg-Al-Zn-Mn dilute alloy by tailoring a strong basal texture into a transverse-direction-spread elliptical texture through the minor addition of yttrium(Y).Systematic quasi-in-situ electron backscatter diffraction(EBSD)and dislocation/disclination density analyses were performed to examine the microstructural evolution during deformation.We found that disclinations emerge from defect reactions,including dislocation-grain boundary(GB)and twin-GB interactions,which facilitate twinning plasticity and intergranular accommodation in the elliptical-textured alloy,resulting in improved work-hardening capacity and higher ductility(28.5% along the rolling direction and 32.2%along the transverse direction).By introducing disclination analysis to elucidate defect reactions,multi-grain interactions and the associated microstructure-property relationships in polycrystalline metals,our work provides new insights into the design of advanced Mg alloys with enhanced ductility and formability through crystallographic texture engineering.展开更多
Molecular dynamics(MD)simulation is employed to investigate the deformation behavior under various loading paths and strain rates of nanocrystalline magnesium(NC Mg)with[0001]texture.Atomic-scale structural evolution ...Molecular dynamics(MD)simulation is employed to investigate the deformation behavior under various loading paths and strain rates of nanocrystalline magnesium(NC Mg)with[0001]texture.Atomic-scale structural evolution of NC Mg was performed under uniaxial and biaxial loadings.In tension process,compression twins and basal slip dominate,while the compression process is dominated by tension twins.The activation mechanism of twinning is highly sensitive to the loading path and grain orientation.Meanwhile,the effect of strain rate on the structural evolution of NC Mg was investigated.It is found that the effect of strain rate on the plastic deformation of NC Mg is reflected through the plasticity delays and the way to release the stress.As the strain rate decreases,the plastic deformation mechanism gradually changes from intragranular to grain boundary.Some significant potential deformation mechanisms in the loading process were studied.It is observed that{1121}twins nucleated inside the grains,and the thickening process is completed by basal〈a〉slip of the twin boundary.The strain compatibility between twins is automatically optimized with loading.Moreover,the detwinning mechanism caused by the interaction between twins and basal stacking faults is clarified.展开更多
Surface morphology of Ceratocanthus beetle elytra was investigated for spike surface texture and its geometry using Scanning Electron Microscopy(SEM).Material properties were analyzed for both surface and cross-sectio...Surface morphology of Ceratocanthus beetle elytra was investigated for spike surface texture and its geometry using Scanning Electron Microscopy(SEM).Material properties were analyzed for both surface and cross-section of elytra using nano-indentation technique.The spike texture was significantly rigid compared with the non-textured zone;a bi-layer system of E and H was identified at the elytra cross-section.Normal load acting on spike texture during free-fall conditions was estimated analytically and deflection equation was derived.The design of spike texture with conical base was studied for minimization of deflection and volume using the Non-dominated Sorting Genetic Algorithm(NSGA-II)optimization technique,confirming the smart design of the natural solution.The frictional behavior of elytra was studied using fundamental tribology test and the role of the oriented spike texture was investigated for frictional anisotropy.Compression resistance of full beetle was evaluated for both conglobated and non-conglobated configuration and tensile strengths were compared using Brazilian test.Puncture and wear resistance of full elytra were characterized and correlated with its defense mechanism.展开更多
The microstructure and texture evolution of Mg-xAl-1Zn-1Y-0.1Mn alloys are systematically analyzed.There is no effect of Al addition on grain refinement in the Mg-1Zn-1Y-0.1Mn alloy,but the addition of 0.5 wt.%or more...The microstructure and texture evolution of Mg-xAl-1Zn-1Y-0.1Mn alloys are systematically analyzed.There is no effect of Al addition on grain refinement in the Mg-1Zn-1Y-0.1Mn alloy,but the addition of 0.5 wt.%or more Al element dramatically changes texture from a weak texture to a strong basal texture.The predominant second phase particle of Mg_(3)Zn_(3)Y_(2) phase in the Mg-1Zn-1Y-0.1Mn alloy changes to Al_(2)Y phase by the addition of only 0.1 wt.%Al element,and the concentrations of dissolved Y element in the 0Al,0.1Al,0.3Al,0.5Al and 1Al alloys are 0.50,0.31,0.23,0.15 and 0.06 wt.%,respectively.Although the 0.5 wt.%or more Al-added alloys have higher Schmid factor for prismatic(a)slip than the 0.3 wt.%or less Al-added alloys,the lower Al containing alloys show much higher activity of prismatic (a)slip than the higher Al containing alloys.It demonstrates that the addition of high amount of Al element in Mg-Zn-RE alloy dramatically decrease the dissolved Y element,resulting in a significant deterioration of activity of prismaticslip and consequently a poor formability at room temperature.展开更多
Gallium nitride(GaN),as a third-generation semiconductor,is highly attractive due to its exceptional physical and chemical properties.Laser direct writing offers an efficient method for the precise processing of hard ...Gallium nitride(GaN),as a third-generation semiconductor,is highly attractive due to its exceptional physical and chemical properties.Laser direct writing offers an efficient method for the precise processing of hard and brittle materials.In this work,various types of surface microtexture were processed on GaN epilayers using a femtosecond laser with a wavelength of 1030 nm.The effects of the laser energy,singlepulse interval,number of pulses,and number of scan passes on groove machining were investigated with a view to achieving high-quality micromachining.The depth,width,surface morphology,and roughness of the grooves were analyzed using scanning electron microscopy,laser scanning confocal microscopy,and atomic force microscopy.Damage and stress were characterized at the microscale using Raman spectroscopy.High-quality precision machining of different types of periodic surface microtexture at 40 mW laser power was achieved by controlling the process parameters and laser trajectory.Finally,an initial exploration was conducted to examine vector-light-based microand nanostructure processing.The findings demonstrate the potential of femtosecond lasers for efficient micromachining of hard and brittle materials without the creation of heat-affected zones or microcracks.The high-quality textured structures achieved through this processing technique have broad and promising applications in optoelectronic devices and tribology.展开更多
Prefabricated twinning represents an effective strategy for optimizing the microstructure of extruded forming components and facilitating changes in texture.The study examines the incorporation of[10-12]twins into an ...Prefabricated twinning represents an effective strategy for optimizing the microstructure of extruded forming components and facilitating changes in texture.The study examines the incorporation of[10-12]twins into an AZ31 magnesium alloy billet via cold pre-upsetting deformation before alternating forward extrusion(CUAFE).The experimental results indicate that the initial presence of[10-12]twins is advantageous for the development of[10-10]and[11-20]texture components during the extrusion process.In addition,different DRX mechanisms have different influences on the evolution of basal texture.The CDRX grains tend to preferentially select the[11-20]texture orientation,weakening the[10-10]texture and enhancing the[11-20]texture.However,most DDRX grains deviate significantly from the orientation of their surrounding original grain and do not have a preferred orientation.This is reflected in the mechanical properties of the CUAFE part.The tensile strength is 323.5 MPa,while the elongation is as high as 20.1%.展开更多
Constrained Friction Processing(CFP),a novel friction-based technique,has been developed to efficiently process fine-grained magnesium(Mg)rods,expanding the potential applications of biodegradable Mg alloys in medical...Constrained Friction Processing(CFP),a novel friction-based technique,has been developed to efficiently process fine-grained magnesium(Mg)rods,expanding the potential applications of biodegradable Mg alloys in medical implants.This study investigates the enhancement of mechanical properties through the implementation of multiple pass CFP(MP-CFP)in comparison to the conventional single pass CFP.The results reveal a substantial improvement in compressive yield strength(CYS),ultimate compressive strength,and failure plastic strain by 11%,28%,and 66%,respectively.A comprehensive analysis of material evolution during processing and the effects of the final microstructure on mechanical properties was conducted.The intricate material flow behavior during the final plunge stage of MP-CFP results in a reduced intensity of local basal texture and macrotexture.The diminished intensity of basal texture,combined with a low geometrical compatibility factor at the top of the rod after MP-CFP,effectively impedes slip transfer across grain boundaries.This leads to a local strain gradient along the compression direction,ultimately contributing to the observed enhancement in mechanical properties.The Mg-0.5Zn0.3Ca(wt.%)alloy,after texture modification by MP-CFP,exhibits a competitive CYS compared with other traditional methods,highlighting the promising application potential of MP-CFP.展开更多
Early detection of convective clouds is vital for minimizing hazardous impacts.Forecasting convective initiation(CI)using current multispectral geostationary meteorological satellites is often challenged by high false...Early detection of convective clouds is vital for minimizing hazardous impacts.Forecasting convective initiation(CI)using current multispectral geostationary meteorological satellites is often challenged by high false-alarm rates and missed detections caused by limited resolution.In contrast,high-resolution earth observation satellites offer more detailed texture information,improving early detection capabilities.The authors propose a novel methodology that integrates the advanced features of China’s latest-generation satellites,Gaofen-4(GF-4)and Fengyun-4A(FY-4A).This fusion method retains GF’s high-resolution details and FY-4A’s multispectral information.Two cases from different observational scenarios and weather conditions under GF-4’s staring mode were carried out to compare the CI forecast results based on fused data and solely on FY-4A data.The fused data demonstrated superior performance in detecting smaller-scale convective clouds,enabling earlier forecasting with a lead time of 15–30 minutes,and more accurate location identification.Integrating high-resolution earth observation satellites into early convective cloud detection provides valuable insights for forecasters and decision-makers,particularly given the current resolution limitations of geostationary meteorological satellites.展开更多
This work managed the extrusion strain path by designing various extrusion die cavities,successfully realizing the texture modification for the ZK60 magnesium alloy.The mechanisms involving the texture dependence on t...This work managed the extrusion strain path by designing various extrusion die cavities,successfully realizing the texture modification for the ZK60 magnesium alloy.The mechanisms involving the texture dependence on the extrusion die cavity as well as their effects on the mechanical properties were emphatically investigated.Results showed that dynamic recrystallization refined the grain size and improved the microstructure homogeneity in the three extrusion specimens,but did not produce too large microstructure differences.By comparison,significant texture differences developed owing to the various extrusion die cavities,which here were mainly reflected in the strong or weak texture components for the c-axes//TD and the c-axes//ND.Such texture differences started from the deformation texture instead of the recrystallization texture whose roles only consisted in dispersing the texture component and reducing the texture intensity.The results from the finite element analysis and the visco-plastic self-consistent model indicated that,in order to accommodate the different strain components induced by the extrusion die cavities,slip systems or tension twinning were activated differently,and this was the critical reason causing the above texture differences.One modified Hall-Petch relationship was adopted to analyze the conjoint effects of grain refinement and texture variation on the yield stress.Additionally,the quantitative results about deformation mechanism activation fractions demonstrated that the texture variations influenced the competition relationships between the twinning induced deformation and the slip dominant deformation,and the former generally produced the lower yield stress and the increasing stage of strain hardening rate,while the latter produced the higher yield stress and the continuous decline of strain hardening rate.展开更多
基金Project(51975169)supported by the National Natural Science Foundation of ChinaProject(LH2022E085)supported by the Natural Science Foundation of Heilongjiang Province,China。
文摘Efficient tool condition monitoring techniques help to realize intelligent management of tool life and reduce tool usage costs.In this paper,the influence of different wear degrees of ball-end milling cutters on the texture shape of machining tool marks is investigated,and a method is proposed for predicting the wear state(including the position and degree of tool wear)of ball-end milling cutters based on entropy measurement of tool mark texture images.Firstly,data samples are prepared through wear experiments,and the change law of the tool mark texture shape with the tool wear state is analyzed.Then,a two-dimensional sample entropy algorithm is developed to quantify the texture morphology.Finally,the processing parameters and tool attitude are integrated into the prediction process to predict the wear value and wear position of the ball end milling cutter.After testing,the correlation between the predicted value and the standard value of the proposed tool condition monitoring method reaches 95.32%,and the accuracy reaches 82.73%,indicating that the proposed method meets the requirement of tool condition monitoring.
文摘The purpose of the research is to develop a universal algorithm for partial texture segmentation of any visual images. The main peculiarity of the proposed segmentation procedure is the extraction of only homogeneous fine-grained texture segments present in the images. At first, an initial seed point is found for the largest and most homogeneous segment of the image. This initial seed point of the segment is expanded using a region growing method. Other texture segments of the image are extracted analogously in turn. At the second stage, the procedure of merging the extracted segments belonging to the same texture class is performed. Then, the detected texture segments are input to a neural network with competitive layers which accomplishe</span><span style="font-family:Verdana;">s</span><span style="font-family:""><span style="font-family:Verdana;"> more accurate delineation of the shapes of the extracted texture segments. The proposed segmentation procedure is fully unsupervised, <i></span><i><span style="font-family:Verdana;">i.e.</span></i><span style="font-family:Verdana;"></i>, it does not use any a priori knowledge on either the type of textures or the number of texture segments in the image. The research results in development of the segmentation algorithm realized as a computer program tested in a series of experiments that demonstrate its efficiency on grayscale natural scenes.
文摘The textures and microstructures of hot-and cold-rolled sheets of an AA 5454 aluminium alloy were studied,with special attention paid to comparing the texture development for the symmetric and asymmetric cold rolling.Scanning electron microscopy with electron-backscatter diffraction was used to monitor the development of the microstructure in the differently deformed and additionally annealed samples.Details of the formations and transformations of individual texture components occurring during the rolling processes were observed and discussed.The average grain sizes,textures and mechanical properties were correlated and explained for the symmetric and asymmetric cold-rolled samples.The asymmetric rolling is beneficial in terms of deep drawability because it reduces the planar anisotropy of the annealed material due to the decrease of the Cube,Goss,rotated-Cube and η-fibre texture components and at the same time strengthens X1-and X2-fibre texture components which are shear texture components and improve deep drawability.During the asymmetric cold rolling,the temperature increases due to friction,triggering recrystallisation processes and leading to larger grains.It is also confirmed that asymmetric cold rolling uses less rolling force and consequently less energy to produce a final material with better formability,particularly earing.
基金supported by the Nation Key Research and Development Program of China(No.2021YFB3701100).
文摘Hot deformation with high strain rate has been paid more attention due to its high efficiency and low cost,however,the strain rate dependent dynamic recrystallization(DRX)and texture evolution in hot deformation process,which affect the formability of metals,are lack of study.In this work,the DRX behavior and texture evolution of Mg-8Gd-1Er-0.5Zr alloy hot compressed with strain rates of 0.1 s^(−1),1 s^(−1),10 s^(−1) and 50 s^(−1) are studied,and the corresponding dominant mechanisms for DRX and texture weakening are discussed.Results indicated the DRX fraction was 20%and the whole texture intensity was 16.89 MRD when the strain rate was 0.1 s^(−1),but they were 76%and 6.55 MRD,respectively,when the strain rate increased to 50 s^(−1).The increment of DRX fraction is suggested to result from the reduced DRX critical strain and the increased dislocation density as well as velocity,while the weakened whole texture is attributed to the increased DRX grains.At the low strain rate of 0.1 s^(−1),discontinuous DRX(DDRX)was the dominant,but the whole texture was controlled by the deformed grains with the preferred orientation of{0001}⊥CD,because the number of DDRX grains was limited.At the high strain rate of 50 s^(−1),continuous DRX(CDRX)and twin-induced DRX(TDRX)were promoted,and more DRX grains resulted in orientation randomization.The whole texture was mainly weakened by CDRX and TDRX grains,in which CDRX plays a major role.The results of present work are significant for understanding the hot workability of Mg-RE alloys with a high strain rate.
基金by National Natural Science Foundation of China(Nos.52271103,52334010 and 52271031)Jilin Scientific and Technological Development Program(Nos.20220301026GX,20210201115GX and 20210301041GX).
文摘Conventional rolled Mg-Al alloy sheets typically exhibit strong basal textures that remain and may even strengthen after recrystallization annealing due to the preferential growth of basal-oriented grains,resulting in poor formability at room temperature.Therefore,the knowledge of recrystallization and grain growth is critical for modifying textures of Mg-Al alloy sheets.The static recrystallization and texture evolution in a cold-rolled dilute Mg-1Al(wt.%)alloy during various annealed temperatures ranging from 300℃ to 450℃,have been investigated using the quasi in-situ electron backscatter diffraction(EBSD)method.The as-rolled Mg-1Al alloy shows a dominant basal texture,which weakens and broadens in the rolling direction(RD)during the subsequent annealing,accompanied by the formation of{1010}texture component.Particularly,the {1010} texture component is more pronounced after annealing at high temperatures.The quasi in-situ EBSD results show that recrystallized grains are mainly induced by shear bands,which exhibit a wide spectrum of orientations with c-axis tilt angles ranging 20°-45°from the normal direction(ND).Orientations of shear band-induced recrystallized grains are retained during the entire recrystallization process,resulting in a reduction in the texture intensity.Moreover,recrystallized grains belonging to the {1010}texture component grow preferentially compared to those with other orientations,which is attributed to low energy grain boundaries,especially grain boundaries with∼30°misorientation angles.Furthermore,the high temperature annealing facilitates the rapid growth of grain boundaries having a 30°misorientation angle,leading to the occurrence of distinct {1010} texture after annealing at 450℃ for 1 h.The results provide insights for texture modification of rare earth-free low-alloyed Mg alloys by controlling annealing parameters.
基金supported by the National Key Research and Development Program of China(No.SQ2021YFF 0600011).
文摘7039 Al alloys are widely used in armor vehicles,given the material’s high specific strength and fracture toughness.However,laminar tearing in the thickness plane of the base metal(BM),specifically in the normal direction(ND)and rolling direction(RD)plane,was occasionally observed after the welding of thick plates,resulting in premature material failure.A vertically metal-inert gas(MIG)-welded laminar tearing component of a 30 mm thick plate was analyzed to determine the factors associated with this phenomenon.The texture,residual stress,microhardness,and tensile properties were also investigated.The results indicated that the crack extended along the RD as a transcrystalline fracture and terminated at the BM.The grains near the crack grew preferentially in the(001)crystal direction.Furthermore,the tensile strength(83 MPa)and elongation(6.8%)in the RD were relatively higher than those in the ND.In particular,the primary factors for crack initiation include stronger texture,higher dislocation density,increased Al_(7)Cu_(2)Fe phases,lower proportion of small-angle grain boundaries,and varying grain sizes in different regions,leading to the fragile microstructure.The higher residual stress of the BM promotes the formation and extension of cracks.The restraining force due to fixation and welding shrinkage force transformed the crack into laminar tearing.Preventive measures of laminar tearing were also proposed.
基金supported by the project“GEF9874:Strengthening Coordinated Approaches to Reduce Invasive Alien Species(lAS)Threats to Globally Significant Agrobiodiversity and Agroecosystems in China”funding from the Excellent Talent Training Funding Project in Dongcheng District,Beijing,with project number 2024-dchrcpyzz-9.
文摘Ecological monitoring vehicles are equipped with a range of sensors and monitoring devices designed to gather data on ecological and environmental factors.These vehicles are crucial in various fields,including environmental science research,ecological and environmental monitoring projects,disaster response,and emergency management.A key method employed in these vehicles for achieving high-precision positioning is LiDAR(lightlaser detection and ranging)-Visual Simultaneous Localization and Mapping(SLAM).However,maintaining highprecision localization in complex scenarios,such as degraded environments or when dynamic objects are present,remains a significant challenge.To address this issue,we integrate both semantic and texture information from LiDAR and cameras to enhance the robustness and efficiency of data registration.Specifically,semantic information simplifies the modeling of scene elements,reducing the reliance on dense point clouds,which can be less efficient.Meanwhile,visual texture information complements LiDAR-Visual localization by providing additional contextual details.By incorporating semantic and texture details frompaired images and point clouds,we significantly improve the quality of data association,thereby increasing the success rate of localization.This approach not only enhances the operational capabilities of ecological monitoring vehicles in complex environments but also contributes to improving the overall efficiency and effectiveness of ecological monitoring and environmental protection efforts.
基金Inner Mongolia Natural Science Foundation Project(2020LH05028)。
文摘Impact of texture type on the magnetic properties of ultrahigh density perpendicular magnetic recording media L1_(0)-FePt thin film was investigated,so were the texture formation and evolution mechanism.Reuss,Voigt,and Hill models were used to determine the anisotropic elastic modulus of L1_(0)-FePt thin film with fiber texture.Then,the elastic strain energies of thin films under various stress conditions were calculated.Results reveal that the stress condition has a significant influence on the fiber texture evolution.When the L1_(0)-FePt thin film is subjected to compressive in-plane strain prior to ordering phase transformation,the formation of{100}fiber texture is promoted.On the contrary,the ordering phase transformation under tensile in-plane strain promotes the{001}fiber texture formation.
基金supported by the National Research Foundation of Korea(NRF)grants funded by the Korea government(MSIT)(nos.RS-2024-00351052 and 202300212657).
文摘This study investigates the influence of initial crystallographic texture on the deformation mechanisms during three-point bending of AZ31 Mg alloy sheets.Three distinct orientations are examined by using the following bending specimens:(i)the normal direction(ND)sample,where the c-axes are predominantly aligned along the specimen thickness,(ii)the rolling direction(RD)sample,where the c-axes are mostly aligned along the longitudinal direction,and(iii)the 45 sample,where the c-axes are tilted at approximately 45°from both the thickness and longitudinal directions.The bending properties vary significantly depending on the initial texture,thereby affecting the strain accommodation and dominant deformation modes.The ND sample exhibits the lowest bendability due to its unfavorable orientation for{10–12}extension twinning and basal slip,which results in poor strain accommodation and early crack initiation in the outer tensile side.By comparison,the RD sample demonstrates an approximately 22.1%improvement,with extensive{10–12}extension twinning in the outer tensile zone.Meanwhile,the 45 sample exhibits the highest bendability(approximately 75.7%greater than that of the ND sample)due to sustained activation of both basal slip and{10–12}extension twinning,promoting uniform strain distribution and delaying fracture.Detailed electron backscatter diffraction analysis reveals that the 45 sample retains favorable crystallographic orientations for basal slip throughout bending,minimizing strain localization and enhancing the bendability.These findings highlight the importance of tailoring the initial texture in order to optimize the bending properties of Mg alloy sheets,and provide valuable insights for improving the manufacturability of Mg-based structural components.
基金Tral Science Foundation of China(Nos.52271103,52334010and 52271031)Partial financial support came from JilinScientific and Technological Development Program(No.20220301026GX)Program for the Central UniversityYouth Innovation Team。
文摘In this work,a good balance of strength and ductility(a yield strength of 185 MPa and a uniform elongation of 20%)has been obtained in a dilute Mg-1.8Zn-0.3Y-0.3Ca-0.3Zr(wt.%)alloy using hard plate rolling(HPR)followed by annealing,with a low anisotropy in mechanical properties.More importantly,the HPR-annealed alloy shows an excellent formability at the same time,i.e.,the index Erichsen(I.E.)value reaches 7.9 mm(the Erichsen cupping test)at room temperature,which is higher compared with the Mg-1.8Zn-0.3Y-0.3Ca0.3Zr alloy produced by conventional multi-pass rolling(CR)followed by annealing.The excellent synergy of strength and formability of the HPR-annealed alloy is mainly attributed to a weak elliptical ring texture,as well as finer and denser Zn_(2)Zr_(3)precipitates.The formation of weak elliptical ring texture is related to the preferential co-segregation of Zn and Ca elements at boundaries of basal grains with smal misorientation angles during annealing,which inhibits the growth of basal grains and promotes the preferential growth of non-basal grains At the same time,in comparison with the CR-annealed alloy,the HPR-annealed alloy contains finer and denser Zn_(2)Zr_(3)precipitates that ar less likely to become sources of cracks,leading to the higher strength and formability of the HPR-annealed alloy.The results in this work can provide reference for the development of high strength Mg alloy sheets with excellent room temperature formability,which also shed light on mitigating planar anisotropy in mechanical properties for Mg alloy sheets.
文摘Background Three-dimensional terrain models are essential in domains such as video game development and film production.Because surface color is often correlated with terrain geometry,capturing this relationship is critical for generating realistic results.However,most existing methods synthesize either a heightmap or a texture without adequately modeling their inherent correlation.Methods We propose a method that jointly generates terrain heightmaps and textures using a latent diffusion model.First,we train the model in an unsupervised manner to randomly generate paired heightmaps and textures.Then,we perform supervised learning on an external adapter to enable user control via hand-drawn sketches.Results Experiments demonstrate that our approach supports intuitive terrain generation while preserving the correlation between heightmaps and textures.Conclusion Our method outperforms the two-stage and GAN-based baselines by ensuring structural coherence,in which textures naturally align with geometry,successfully accommodating both realistic landscapes and extreme user-defined shapes.
基金Financial supports from The National Natural Science Foundation of China (Nos. U22A20109, 52171116 and 52334010)Partial financial support came from The Program for the Central University Youth Innovation TeamThe Fundamental Research Funds for the Central Universities, JLU.
文摘Crystallographic texture engineering is a key strategy for enhancing the mechanical properties of polycrystalline magnesium(Mg)alloys.Due to the intrinsic anisotropy of the hexagonal close-packed(HCP)structure,the deformation behavior of Mg alloys is significantly governed by individual grain deformation and multi-grain interactions,both dictated by crystallographic texture.In the current study,enhanced ductility was achieved in a Mg-Al-Zn-Mn dilute alloy by tailoring a strong basal texture into a transverse-direction-spread elliptical texture through the minor addition of yttrium(Y).Systematic quasi-in-situ electron backscatter diffraction(EBSD)and dislocation/disclination density analyses were performed to examine the microstructural evolution during deformation.We found that disclinations emerge from defect reactions,including dislocation-grain boundary(GB)and twin-GB interactions,which facilitate twinning plasticity and intergranular accommodation in the elliptical-textured alloy,resulting in improved work-hardening capacity and higher ductility(28.5% along the rolling direction and 32.2%along the transverse direction).By introducing disclination analysis to elucidate defect reactions,multi-grain interactions and the associated microstructure-property relationships in polycrystalline metals,our work provides new insights into the design of advanced Mg alloys with enhanced ductility and formability through crystallographic texture engineering.
基金supports from the projects by the NSFC[51771166]the Hebei Natural Science Foundation[E2019203452,E2021203011]+3 种基金the key project of department of education of Hebei province[ZD2021107]project of the central government guiding local science and technology development[216Z1001G]Cultivation Project for Basic Research and Innovation of Yanshan University[2021LGZD002]project of State Key Laboratory of Materials Processing and Die&Mould Technology[P2023-004]are gratefully acknowledged.
文摘Molecular dynamics(MD)simulation is employed to investigate the deformation behavior under various loading paths and strain rates of nanocrystalline magnesium(NC Mg)with[0001]texture.Atomic-scale structural evolution of NC Mg was performed under uniaxial and biaxial loadings.In tension process,compression twins and basal slip dominate,while the compression process is dominated by tension twins.The activation mechanism of twinning is highly sensitive to the loading path and grain orientation.Meanwhile,the effect of strain rate on the structural evolution of NC Mg was investigated.It is found that the effect of strain rate on the plastic deformation of NC Mg is reflected through the plasticity delays and the way to release the stress.As the strain rate decreases,the plastic deformation mechanism gradually changes from intragranular to grain boundary.Some significant potential deformation mechanisms in the loading process were studied.It is observed that{1121}twins nucleated inside the grains,and the thickening process is completed by basal〈a〉slip of the twin boundary.The strain compatibility between twins is automatically optimized with loading.Moreover,the detwinning mechanism caused by the interaction between twins and basal stacking faults is clarified.
基金supported by Ministero Universitàe Ricerca(MUR-PRIN 20222022ATZCJN AMPHYBIA)CUP N.E53D23003040006Ministero dell'istruzione dell'universitàe della ricerca(MIUR-PON 2018 PROSCAN)CUP N.E96C18000440008European Union NextGenerationEU PNRR Spoke 7 CN00000013 HPC CUP N.E63C22000970007.
文摘Surface morphology of Ceratocanthus beetle elytra was investigated for spike surface texture and its geometry using Scanning Electron Microscopy(SEM).Material properties were analyzed for both surface and cross-section of elytra using nano-indentation technique.The spike texture was significantly rigid compared with the non-textured zone;a bi-layer system of E and H was identified at the elytra cross-section.Normal load acting on spike texture during free-fall conditions was estimated analytically and deflection equation was derived.The design of spike texture with conical base was studied for minimization of deflection and volume using the Non-dominated Sorting Genetic Algorithm(NSGA-II)optimization technique,confirming the smart design of the natural solution.The frictional behavior of elytra was studied using fundamental tribology test and the role of the oriented spike texture was investigated for frictional anisotropy.Compression resistance of full beetle was evaluated for both conglobated and non-conglobated configuration and tensile strengths were compared using Brazilian test.Puncture and wear resistance of full elytra were characterized and correlated with its defense mechanism.
基金financially supported by the Fundamental Research Program of the Korea Institute of Materials Science(Grant No.360–05–04-PNKA540)the National Research Foundation of Korea(CRC23011–210).
文摘The microstructure and texture evolution of Mg-xAl-1Zn-1Y-0.1Mn alloys are systematically analyzed.There is no effect of Al addition on grain refinement in the Mg-1Zn-1Y-0.1Mn alloy,but the addition of 0.5 wt.%or more Al element dramatically changes texture from a weak texture to a strong basal texture.The predominant second phase particle of Mg_(3)Zn_(3)Y_(2) phase in the Mg-1Zn-1Y-0.1Mn alloy changes to Al_(2)Y phase by the addition of only 0.1 wt.%Al element,and the concentrations of dissolved Y element in the 0Al,0.1Al,0.3Al,0.5Al and 1Al alloys are 0.50,0.31,0.23,0.15 and 0.06 wt.%,respectively.Although the 0.5 wt.%or more Al-added alloys have higher Schmid factor for prismatic(a)slip than the 0.3 wt.%or less Al-added alloys,the lower Al containing alloys show much higher activity of prismatic (a)slip than the higher Al containing alloys.It demonstrates that the addition of high amount of Al element in Mg-Zn-RE alloy dramatically decrease the dissolved Y element,resulting in a significant deterioration of activity of prismaticslip and consequently a poor formability at room temperature.
基金supported by the Henan Key Laboratory of Intelligent Manufacturing Equipment Integration for Superhard Materials(Grant No.JDKJ2022-01)the National Natural Science Foundation of China(Grant Nos.52035009 and 51761135106)+1 种基金the 2020 Mobility Programme of the Sino-German Center for Research Promotion(Grant No.M-0396)the“111”project by the State Administration of Foreign Experts Affairs and the Ministry of Education of China(Grant No.B07014).
文摘Gallium nitride(GaN),as a third-generation semiconductor,is highly attractive due to its exceptional physical and chemical properties.Laser direct writing offers an efficient method for the precise processing of hard and brittle materials.In this work,various types of surface microtexture were processed on GaN epilayers using a femtosecond laser with a wavelength of 1030 nm.The effects of the laser energy,singlepulse interval,number of pulses,and number of scan passes on groove machining were investigated with a view to achieving high-quality micromachining.The depth,width,surface morphology,and roughness of the grooves were analyzed using scanning electron microscopy,laser scanning confocal microscopy,and atomic force microscopy.Damage and stress were characterized at the microscale using Raman spectroscopy.High-quality precision machining of different types of periodic surface microtexture at 40 mW laser power was achieved by controlling the process parameters and laser trajectory.Finally,an initial exploration was conducted to examine vector-light-based microand nanostructure processing.The findings demonstrate the potential of femtosecond lasers for efficient micromachining of hard and brittle materials without the creation of heat-affected zones or microcracks.The high-quality textured structures achieved through this processing technique have broad and promising applications in optoelectronic devices and tribology.
基金supported by the National Natural Science Foundation of China(No.52475341).
文摘Prefabricated twinning represents an effective strategy for optimizing the microstructure of extruded forming components and facilitating changes in texture.The study examines the incorporation of[10-12]twins into an AZ31 magnesium alloy billet via cold pre-upsetting deformation before alternating forward extrusion(CUAFE).The experimental results indicate that the initial presence of[10-12]twins is advantageous for the development of[10-10]and[11-20]texture components during the extrusion process.In addition,different DRX mechanisms have different influences on the evolution of basal texture.The CDRX grains tend to preferentially select the[11-20]texture orientation,weakening the[10-10]texture and enhancing the[11-20]texture.However,most DDRX grains deviate significantly from the orientation of their surrounding original grain and do not have a preferred orientation.This is reflected in the mechanical properties of the CUAFE part.The tensile strength is 323.5 MPa,while the elongation is as high as 20.1%.
基金Ting Chen thanks the China Scholarship Council for the Award of a Fellowship(No.202006230137)Benjamin Klusemann ac-knowledges funding by the Deutsche Forschungsgemeinschaft(DFG,German Research Foundation)-project number 544306307+1 种基金Banglong Fu acknowledge the financial support of the National Natural Science Foundation of China(Grant No.52405386)State Key Laboratory of Precision Welding&Joining of Materials and Structures(Grant No.MSWJ-24M13).
文摘Constrained Friction Processing(CFP),a novel friction-based technique,has been developed to efficiently process fine-grained magnesium(Mg)rods,expanding the potential applications of biodegradable Mg alloys in medical implants.This study investigates the enhancement of mechanical properties through the implementation of multiple pass CFP(MP-CFP)in comparison to the conventional single pass CFP.The results reveal a substantial improvement in compressive yield strength(CYS),ultimate compressive strength,and failure plastic strain by 11%,28%,and 66%,respectively.A comprehensive analysis of material evolution during processing and the effects of the final microstructure on mechanical properties was conducted.The intricate material flow behavior during the final plunge stage of MP-CFP results in a reduced intensity of local basal texture and macrotexture.The diminished intensity of basal texture,combined with a low geometrical compatibility factor at the top of the rod after MP-CFP,effectively impedes slip transfer across grain boundaries.This leads to a local strain gradient along the compression direction,ultimately contributing to the observed enhancement in mechanical properties.The Mg-0.5Zn0.3Ca(wt.%)alloy,after texture modification by MP-CFP,exhibits a competitive CYS compared with other traditional methods,highlighting the promising application potential of MP-CFP.
基金supported by the Demonstration System for High Resolution Meteorological Application(Ⅱ)[grant number 32-Y30F08-9001-20/22]the National Natural Science Foundation of China[grant numbers 12292981 and 12292984]。
文摘Early detection of convective clouds is vital for minimizing hazardous impacts.Forecasting convective initiation(CI)using current multispectral geostationary meteorological satellites is often challenged by high false-alarm rates and missed detections caused by limited resolution.In contrast,high-resolution earth observation satellites offer more detailed texture information,improving early detection capabilities.The authors propose a novel methodology that integrates the advanced features of China’s latest-generation satellites,Gaofen-4(GF-4)and Fengyun-4A(FY-4A).This fusion method retains GF’s high-resolution details and FY-4A’s multispectral information.Two cases from different observational scenarios and weather conditions under GF-4’s staring mode were carried out to compare the CI forecast results based on fused data and solely on FY-4A data.The fused data demonstrated superior performance in detecting smaller-scale convective clouds,enabling earlier forecasting with a lead time of 15–30 minutes,and more accurate location identification.Integrating high-resolution earth observation satellites into early convective cloud detection provides valuable insights for forecasters and decision-makers,particularly given the current resolution limitations of geostationary meteorological satellites.
基金supported by National Natural Science Foundation of China(Grant No.52205344,51925401)Postdoctoral Research Foundation of China(Grant No.2023M732398)+1 种基金National Key Laboratory Foundation of Science and Technology on Materials under Shock and Impact(Grant No.WDZC2023-1)Key Research and Development Program of Shandong Province(Grant No.2023CXPT066).
文摘This work managed the extrusion strain path by designing various extrusion die cavities,successfully realizing the texture modification for the ZK60 magnesium alloy.The mechanisms involving the texture dependence on the extrusion die cavity as well as their effects on the mechanical properties were emphatically investigated.Results showed that dynamic recrystallization refined the grain size and improved the microstructure homogeneity in the three extrusion specimens,but did not produce too large microstructure differences.By comparison,significant texture differences developed owing to the various extrusion die cavities,which here were mainly reflected in the strong or weak texture components for the c-axes//TD and the c-axes//ND.Such texture differences started from the deformation texture instead of the recrystallization texture whose roles only consisted in dispersing the texture component and reducing the texture intensity.The results from the finite element analysis and the visco-plastic self-consistent model indicated that,in order to accommodate the different strain components induced by the extrusion die cavities,slip systems or tension twinning were activated differently,and this was the critical reason causing the above texture differences.One modified Hall-Petch relationship was adopted to analyze the conjoint effects of grain refinement and texture variation on the yield stress.Additionally,the quantitative results about deformation mechanism activation fractions demonstrated that the texture variations influenced the competition relationships between the twinning induced deformation and the slip dominant deformation,and the former generally produced the lower yield stress and the increasing stage of strain hardening rate,while the latter produced the higher yield stress and the continuous decline of strain hardening rate.
