期刊文献+
共找到8篇文章
< 1 >
每页显示 20 50 100
Testability integrated evaluation method based on testability virtual test data 被引量:7
1
作者 Liu Guanjun Zhao Chenxu +1 位作者 Qiu Jing Zhang Yong 《Chinese Journal of Aeronautics》 SCIE EI CAS CSCD 2014年第1期85-92,共8页
Testability virtual test is a new test method for testability verification, which has the advantages such as low cost, few restrictions and large sample of test data. It can be used to make up the deficiency of testab... Testability virtual test is a new test method for testability verification, which has the advantages such as low cost, few restrictions and large sample of test data. It can be used to make up the deficiency of testability physical test. In order to take the advantage of testability virtual test data effectively and to improve the accuracy of testability evaluation, a testability integrated eval- uation method is proposed in this paper based on testability virtual test data. Considering the char- acteristic of testability virtual test data, the credibility analysis method for testability virtual test data is studied firstly. Then the integrated calculation method is proposed fusing the testability vir- tual and physical test data. Finally, certain helicopter heading and attitude system is presented to demonstrate the proposed method. The results show that the testability integrated evaluation method is feasible and effective. 展开更多
关键词 data fusion Fault detection Integrated evaluation testability verification Virtual test
原文传递
Benchmark experiment system for^(252)Cf spontaneous fission source usingγtagging
2
作者 Yu-Ting Wei Chang-Lin Lan +11 位作者 Bo Gao Xian-Lin Yang Gong Jiang Jia-Hao Wang Bo Xie Yang-Bo Nie Yan-Liang Chang Ge Zhang Fan Wu Kuo-Zhi Xu Shi-Long Liu Xi-Chao Ruan 《Nuclear Science and Techniques》 2025年第11期221-231,共11页
Benchmark experiments are indispensable for the development of neutron nuclear data evaluation libraries.Given the lack of domestic benchmarking of nuclear data in the fission energy region,this study developed a neut... Benchmark experiments are indispensable for the development of neutron nuclear data evaluation libraries.Given the lack of domestic benchmarking of nuclear data in the fission energy region,this study developed a neutron leakage spectrum measurement system using a spherical sample based on the^(252)Cf spontaneous fission source.The EJ309 detector(for highenergy measurements)and CLYC detector(for low-energy measurements)were combined to measure the time-of-flight spectrum using theγtagging method.To assess the performance of the system,the time-of-flight spectrum without a sample was measured first.The experimental spectra were consistent with those simulated using the Monte Carlo method and the standard^(252)Cf spectrum from ISO:8529-1.This demonstrates that the system can effectively measure the neutron events in the 0.15-8.0 MeV range.Then,a spherical polyethylene sample was used as the standard to verify the accuracy of the system for the benchmark experiment.The simulation results were obtained using the Monte Carlo method with evaluated data from the ENDF/B-Ⅷ.0,CENDL-3.2,JEFF-3.3,and JENDL-5 libraries.The measured neutron leakage spectra were compared with the corresponding simulated results for the neutron spectrum shape and calculated C/E values.The results showed that the simulated spectra with different data libraries reproduced the experimental results well in the 0.15-8.0 MeV range.This study confirms that the leakage neutron spectrum measurement system based on the^(252)Cf source can perform benchmarking and provides a foundation for evaluating neutron nuclear data through benchmark experiments. 展开更多
关键词 ^(252)Cf Neutron leakage spectrum Benchmark experiment Time-of-flight technique Evaluated nuclear data Spherical samples
在线阅读 下载PDF
测试性研制阶段数据评估验证方法 被引量:15
3
作者 石君友 田仲 《航空学报》 EI CAS CSCD 北大核心 2009年第5期901-905,共5页
分析了现有测试性验证方法应用情况,阐述了测试性研制阶段数据评估验证方法的必要性。通过与现有测试性验证方法的对比分析,提出了一种新的测试性验证方法,并说明了该验证方法的含义和特点。该验证方法可用于故障检测率、故障隔离率和... 分析了现有测试性验证方法应用情况,阐述了测试性研制阶段数据评估验证方法的必要性。通过与现有测试性验证方法的对比分析,提出了一种新的测试性验证方法,并说明了该验证方法的含义和特点。该验证方法可用于故障检测率、故障隔离率和虚警率的验证。建立了该验证方法的工作框架,包括验证要求、验证程序、验证技术和验证组织。重点阐述了该验证方法的两种工作方式实施流程、适用的最小样本量范围、测试性数据收集表格和测试性数据判据。其中,测试性数据收集表格可以记录故障检测、故障隔离和虚警信息。进行了案例应用,给出了数据分析结果和经验总结。案例应用表明该方法能够达到测试性验证的效果。 展开更多
关键词 测试性 验证 数据评估 数据判据 研制阶段 样本量 故障检测
原文传递
基于FMECA信息的测试性验证试验样本分配方法 被引量:14
4
作者 陈然 连光耀 +3 位作者 黄考利 闫鹏程 耿梦雪 王凯 《北京航空航天大学学报》 EI CAS CSCD 北大核心 2017年第3期627-635,共9页
针对目前国内外测试性验证试验中普遍采用的基于故障率的分层抽样方法考虑因素单一,可能导致样本分配不尽合理,而现有考虑多因素的样本分配方法代表性不足,难以实现工程上的应用的问题,对影响样本分配的因素与故障模式影响及危害性分析(... 针对目前国内外测试性验证试验中普遍采用的基于故障率的分层抽样方法考虑因素单一,可能导致样本分配不尽合理,而现有考虑多因素的样本分配方法代表性不足,难以实现工程上的应用的问题,对影响样本分配的因素与故障模式影响及危害性分析(FMECA)信息的关系进行了详细分析,提出了基于FMECA信息的样本分配方法。首先定义了单元影响系数和影响因子向量,提出了向量各元素赋值规则,解决了影响因素选取的问题;其次通过基于逼近理想解排序法(TOPSIS)优化的层次分析法确定了权值矩阵,实现了样本分配。最后通过实例验证表明该方法考虑因素全面,运用灵活,更具代表性和工程应用价值。 展开更多
关键词 测试性验证试验 故障模式影响及危害性分析(FMECA) 样本分配 影响因素 逼近理想解排序法(TOPSIS) 层次分析法
原文传递
基于仿真数据的小子样复杂装备系统测试性综合评估 被引量:5
5
作者 张西山 黄考利 +2 位作者 闫鹏程 孙江生 连光耀 《计算机测量与控制》 北大核心 2014年第4期1175-1177,共3页
针对小子样复杂装备系统测试性评估问题,提出了一种基于仿真数据的综合评估方法;首先分析了仿真数据的可信性,建立了基于相似度量的仿真数据融合方法;然后,将仿真试验结果作为验前信息,结合实物试验信息确定了测试性的验后分布,并给出... 针对小子样复杂装备系统测试性评估问题,提出了一种基于仿真数据的综合评估方法;首先分析了仿真数据的可信性,建立了基于相似度量的仿真数据融合方法;然后,将仿真试验结果作为验前信息,结合实物试验信息确定了测试性的验后分布,并给出了测试性的点估计和置信下限估计;最后通过实例分析表明该方法是合理有效的。 展开更多
关键词 仿真数据 小子样 测试性评估 相似度量
在线阅读 下载PDF
定向多分支长钻孔治理瓦斯技术体系研究及应用 被引量:9
6
作者 刘东 辛新平 马耕 《矿业安全与环保》 北大核心 2021年第5期108-112,共5页
为实现煤层瓦斯的高效率、低成本治理,对定向长钻孔"两堵一注"定点定长带压封孔测瓦斯压力技术方法进行了改进,研制了深孔定点密闭取样装置,优化了定向长钻孔强化抽采增产技术,进而形成了定向多分支长钻孔治理瓦斯技术体系。... 为实现煤层瓦斯的高效率、低成本治理,对定向长钻孔"两堵一注"定点定长带压封孔测瓦斯压力技术方法进行了改进,研制了深孔定点密闭取样装置,优化了定向长钻孔强化抽采增产技术,进而形成了定向多分支长钻孔治理瓦斯技术体系。开展了现场工程试验,结果表明:在永夏矿区地质条件下定向多分支长钻孔成功施工深度达630 m以上,所研制的深孔定点密闭取样装置能够完成632 m钻孔的密封取样,密闭取样装置结构合理;实测试验区域煤层瓦斯含量、瓦斯涌出初速度、钻屑量结果一致性较好,测试结果可靠性满足要求;掘进过程中瓦斯涌出量与掘进速度呈明显的正相关关系,且瓦斯涌出量最大值位置与瓦斯含量、区域验证指标最大值区域位置一致,证明了定向多分支长钻孔治理瓦斯技术体系的可靠性。 展开更多
关键词 定向多分支钻孔 密闭取样 抽采评价技术 区域验证指标 瓦斯涌出量
在线阅读 下载PDF
基于仿真数据的测试性验证序贯设计方案 被引量:3
7
作者 赵学远 王康 +1 位作者 秦亮 王帅磊 《海军航空工程学院学报》 2019年第1期146-150,168,共6页
针对当前测试性验证试验设计方案均存在确定的故障样本量较大以及验证周期长的问题,提出了一种基于仿真数据的测试性验证序贯设计方案。首先,基于二项分布模型确定序贯设计的判决阈值;然后,在序贯试验下基于给定的样本量分配和故障模式... 针对当前测试性验证试验设计方案均存在确定的故障样本量较大以及验证周期长的问题,提出了一种基于仿真数据的测试性验证序贯设计方案。首先,基于二项分布模型确定序贯设计的判决阈值;然后,在序贯试验下基于给定的样本量分配和故障模式选取方法,采用仿真的方式生成相应的故障模式并进行验证试验。同时,以序贯方式计算相应的概率比,通过其取值动态判定接受/拒收。结果表明,与传统方法相比,该方法与经典验证方法具备几乎相同的抽样特性,能达到有效减少测试性验证试验所需故障样本量的目的。 展开更多
关键词 测试性验证 仿真数据 故障样本量 序贯设计
在线阅读 下载PDF
一种测试性验证数据评估软件的设计研究
8
作者 罗鑫云 房燕飞 叶晓慧 《舰船电子工程》 2014年第1期108-111,共4页
针对目前测试性验证数据处理工作繁琐复杂,测试性验证软件相对较少的现状,提出了一个数据处理的新模型,设计了测试性验证数据评估软件,重点对测试性验证试验流程、软件数据处理流程、软件功能设计、数据库设计以及数据抽样技术进行了研... 针对目前测试性验证数据处理工作繁琐复杂,测试性验证软件相对较少的现状,提出了一个数据处理的新模型,设计了测试性验证数据评估软件,重点对测试性验证试验流程、软件数据处理流程、软件功能设计、数据库设计以及数据抽样技术进行了研究,最后进行了实例分析,结果表明该模型能够用软件实现,并完成测试性验证数据评估,具有一定的实用性和参考价值。 展开更多
关键词 测试性验证 数据评估 抽样技术
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部